MTFCA Forum

Going to Kurt. Thank you.

One complete early differential in excellent condition. Ready to install. Price is $150 plus $18.50 priority flat rate shipping. Mark Chaffin (951)805-0928

Give us or Snyder's a call. We will be happy to fill your order while supplies last.

You can order them separately.

Just a quick note to let folks know we have made another run of the 26/27 wire wheel lug nuts. They come in a set of twenty. You can also purchase them individually for the spare tire if you prefer. They are the same as the original lug nut to include polished cadmium plating. Although we are the so...

The Stevens tool in question grabs the inner ID of the bushing by means of a series of serrated edges. As you drive the tool downward, it tightens against the ID of the bushing. The bushing is then driven out. This is all done while the drum is supported by one of the circular fixtures.

One set going to Steve. Thank you Steve.

One set for T.J. in Texas. Thank you

One set to Dave. Thank you.

Thank you for the kind words Joe.

Several sets remaining at this price.

Those in the know can tell you it is near impossible to find a complete set. $995 per set plus shipping. Once they are gone, we will not be making any more.

.498 is stock size for original NOS bearings. With new axles and new sleeves, you can use bearings down to .490 and they will be superior to the solid bearings. Of course less wear is better. Tight cages are a must. Others may disagree. To each their own.

Going to Dean in Kansas. Thank you.

Going to Dean in Kansas. Thank you Dean.

Miscellaneous assortment of new parts offered as one lot. Retail value is over $175. Don't take my word for it. Look it up. Price for the entire lot is $65 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

An assortment of new carburetor parts offered as one lot. Retail value combined is over $250. Don't take my word for it. Look it up. Get the entire lot for $85.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Great news! Thanks all for getting things worked out. We all appreciate the effort.

Crank handles going to Ed.

Sorry Scott. Parts have been sold.

These parts came from a recent estate sale. They were in a box together. Looks as if someone was putting an engine together and never completed the project. Parts included Jahn's standard pistons and rings. Standard valves and lifters. Includes springs and keepers. New crankshaft gear as well. Babbi...

Various parts as described below. Each will require an additional $18.50 shipping. Mark Chaffin (951)805-0928 20260122_132124.jpg Pan Arms NOS. All for $40.00 plus shipping SOLD 20260122_132018.jpg Pan support bracket sets (3). All for $40.00 plus shipping 20260122_131651.jpg 26/27 brake backing pla...

Going to Bill.

Unique aluminum high compression head with Ford script and 14mm plugs. Price is $450 plus domestic shipping. Mark Chaffin (951)805-0928

We have some still in stock. Give Dave a call Monday (951)226-7331

The cams are right and left. The arms are the same.

Yes. It is exactly the same tool as dad's. Probably the most useful of them all. Very rare and hard to find. Well worth the asking price.

This is an excellent piece of shop equipment to have. I'm curious. Do you have front bar and fixtures as well?

Radiator has been sold. Thank you

Seat skins have been sold. Thank you.

Please read the post above. All items are Pick Up Only. Please call to arrange pick up.

Used high radiator in good condition $150 SOLD

High Firewalls, gas tank with brackets, sidelights, early rear axle housings, 26/27 hood, radiator shell, 1915 hood former, early seat skins.

Assortment of engine block 1915 through 1927 $25 each

Complete 26/27 rear axle with brake shoes $150

Ton Truck Ruckstell assembly. Excellent condition $100

Time to do a little early spring cleaning at the garage. All items are pick up in Lake Elsinore. Mark Chaffin (951) 805-0928 20260107_102120.jpg Assortment of 21" demountable rims $75 each. 20260107_102137.jpg Four 24" 30x3 non demountable rims. Two good. Two very good. $75 each 20260107_102200.jpg ...

Last set going to Dean. Thanks all.

One set to Joshua.

Going to Charlie. Thank you

Front shackle set and pitman arm going to Rick.

Price reduced to $200 plus shipping.

Delco going to Chris.

Hubcap lot going to Bill.

Pulley going to Dean.

Going to Rich. Thank you all for your interest.

Oil pan brackets to Steve.

20251223_110539.jpg Oil pan support bracket set $20 plus $8.50 shipping. SOLD 20251223_110814.jpg Cast iron small crankshaft pulley with pin. No longer reproduced. Price is $30 plus $8.50 shipping. SOLD 20251223_112233.jpg Assortment of original used hubcaps. Price is $25 plus $8.50 shipping. SOLD ...

An assortment of miscellaneous parts as described below. Mark Chaffin (951) 805-0928 20251223_114803.jpg One very good complete set of Ford script "L" style shackles (17-23) with bushings. These are not currently reproduced. Price is $150 plus $8.50 shipping. SOLD 20251223_110928.jpg One set of Fron...

Moore auxiliary transmission for Model T passenger car. Complete with driveline. Prefer pickup at the garage in Lake Elsinore. Price is $250. Mark Chaffin (951) 805-0928

You could try carefully grinding the weld down flush with the top of the castle nut. Apply heat to the weld and try breaking the nut loose.

One set to Val.

Like Steve stated. New sleeves. New axles. No problem. Cleaned and properly installed. They will outlive us all. To each his own.

Even IF the rollers had .010 wear, still far superior to the solid roller bearings. Of course these do not have that kind of wear and the price is very reasonable.

One set to Barry. One set to Kurt.

One set going to LaVon.

One set going to Steve.

One set going to Matt.

Check is fine Ed.

Ton truck bronze high speed ring gear in very good condition. Price WAS $250 NOW $200 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

Set of four used rear axle bearings with tight cages. They come greasy and will require cleaning prior to use. Price is $60 plus $8.50 shipping per set. I have eight sets available. Mark Chaffin (951) 805-0928

Going to Rick.

Three horns for restoration sold as one lot $40 plus $18.50 shipping. Mark Chaffin (951) 805-0928

Early used figure eight shackles sold as one lot $75 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

Going to Rick.

Macbeth Headlight lense set. 8 7/16" OD. Price is $75 for the set plus $18.50 shipping. Mark Chaffin (951) 805-0928

Interesting L style shackle set with Ford script. No visible wear. Likely new. Price is $60 plus $8.50 shipping. Mark Chaffin (951)805-0928

Going to Dave.

Three horns for restoration $50 plus $18.50 shipping. Mark Chaffin (951)805-0928

Bennet Brake parts assortment. Price is $150 plus shipping. Mark Chaffin (951)805-0928

Going to Dean.

Going to Don.

#3 spoken for

#2 going to Scott.

I would hold onto those young man. Especially, the front irons as they are hard as h*ll to find. If you are going to look for a better set, the front pieces (irons) are always missing. I would find the replacements first. Then let those go.

Going to Austin.

Going to Steve. Sorry Kenneth. He beat you to the punch!

Assortment of new parts $35 plus $8.50 shipping. Mark Chaffin (951)805-0928

One pair of complete Ford headlights with green shaded lenses and speedster (modified) mounting brackets. Price is $75 plus domestic shipping. Mark Chaffin (951)805-0928

Four sets of new points $30 plus $8.50 shipping. Mark Chaffin (951)805-0928

Going to Dean. Thank you.

Going to Dean. Thank you

Going to Austin.

Going to Austin.

Going to Rick. Thank you

All sold. Going to Rick. Thank you

Early steel floorboard trim set new $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Muffler shell kit and bolt (09-17). Retail value is $65. Get these for $35.00 plus actual shipping. Mark Chaffin (951) 805-0928

Demountable band set Ford script for narrow drum transmission $30.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

New piston pin set for cast iron pistons $10.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Hood shelves as described and shown below. Combine and save on shipping. Mark Chaffin (951) 805-0928

Take your pic. Current retail is $47.00. These are $20 per set plus shipping.

1926 -1927 radiator apron with correct crank handle thimble. Retail is $39.95. This one is $20 plus shipping.

Engine pan and transmission sets as shown below. Combine and save on shipping. Prices are as indicated below. Mark Chaffin (951) 805-0928 20251217_111212.jpg 1912-1914 sets. Retail is $220. Take your pic $100 plus actual shipping. 20251217_111140.jpg 1919-1927 sets. Retail is $195. Take your pic $10...

Going to Dave.

Going to Greg.

Going to Scott.

One set of round gas tank brackets $35 plus $18.50 shipping. Mark Chaffin (951)805-0928

One set of 26/27 emergency brake bands $40 plus $18.50 shipping. Mark Chaffin (951)805-0928.

Demountable wheel bolt and nut lot. Enough for four wheels. Original and in need of cleaning. Price is $10 plus $8.50 shipping. Mark Chaffin (951)805-0928

Five late style spindle arms NOS. $40 for all plus $8.50 shipping. Mark Chaffin (951)805-0928

This one is correct for year and available. It can be modified for a modern seal as Allan mentioned above. $40 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

Search found 2573 matches