Search found 362 matches

by Scott Rosenthal
Sat Feb 24, 2024 2:11 pm
Forum: General Discussion Forum
Topic: My 1916 coupelet
Replies: 10
Views: 953

Re: My 1916 coupelet

Many thanks Keith.
Regards, Scott
by Scott Rosenthal
Fri Feb 23, 2024 8:55 am
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1288

Re: White gray smooth tires, clincher rims

Still needing these smooth white 30 x 3 tires gentlemen. These are needed for an early project belonging to a long time (60 plus years), highly regarded member and early parts supplier/manufacturer.
Scott
by Scott Rosenthal
Fri Feb 23, 2024 8:47 am
Forum: General Discussion Forum
Topic: My 1916 coupelet
Replies: 10
Views: 953

Re: My 1916 coupelet

Hi Keith:
Many thanks if you could please post more views of the body. Good friend is restoring a 16, and would be grateful for especially views of this top.
Rehards,
Scott
by Scott Rosenthal
Thu Feb 22, 2024 8:38 am
Forum: General Discussion Forum
Topic: Good selling price for a 1911?
Replies: 23
Views: 1303

Re: Good selling price for a 1911?

Assuming someone actually bought this for the 36K price shown, this auction house and this seller may have defrauded.
by Scott Rosenthal
Wed Feb 14, 2024 9:53 am
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1288

Re: White gray smooth tires, clincher rims

BTT. Urgently needing at least (2) of these 30 x 3 smooth white front tires. New would be ideal...lightly used will work. Thanks Scott
by Scott Rosenthal
Tue Feb 13, 2024 8:31 am
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1288

Re: White gray smooth tires, clincher rims

Rec'd call from 510 671-4663, with some of these parts for cheap...voicw 9sounds like middle age guy. Wanted check sent to PO box, could not or would not provide regular mail or Email address. Apologies if just honest circumstances, Mr. J. Jones, but BS meter blinking at this end.
by Scott Rosenthal
Sat Feb 10, 2024 5:10 pm
Forum: Classifieds - Vehicles
Topic: WTB open dual axle trailer
Replies: 10
Views: 969

Re: WTB open dual axle trailer

I have an aluminum trailer built for a model T, but have also hauled model A. Located in Cincinnati.
Scott
513 three seven eight 4235.
by Scott Rosenthal
Fri Feb 09, 2024 1:22 pm
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1288

White gray smooth tires, clincher rims

WTB. New or very nice used white and/or gray smooth tires. Need new or very clean clincher rims, both 30x3 and 30x3 1/2. 513 three seven eight 4235. Calls only please, thx Scott
by Scott Rosenthal
Wed Dec 13, 2023 3:30 pm
Forum: Classifieds - Parts
Topic: FS Saxon early gas spotlight
Replies: 4
Views: 538

Re: FS Saxon early gas spotlight

Anyone else have one of these dash mount brackets they might part with?
Thx Scott
by Scott Rosenthal
Sat Dec 09, 2023 10:01 am
Forum: Classifieds - Parts
Topic: FS Saxon early gas spotlight
Replies: 4
Views: 538

Re: FS Saxon early gas spotlight

Got your note Tom...many thanks.
Regards, Scott
by Scott Rosenthal
Fri Dec 08, 2023 8:19 pm
Forum: Classifieds - Parts
Topic: FS Saxon early gas spotlight
Replies: 4
Views: 538

Re: FS Saxon early gas spotlight

Hi Tom..
Would you happen to know who produced the new mounting bracket?
Thx Scott
by Scott Rosenthal
Tue Nov 21, 2023 7:56 am
Forum: Classifieds - Parts
Topic: Brass spotlamp on swivel for speedster F/S
Replies: 3
Views: 374

Re: Brass spotlamp on swivel for speedster F/S

Anyone have one of this style dash mount bracket? Apologies to hitchhike your advert Layden. Had heard someone reproduced these at some point...hoping I can locate original or repro.
Regards,
Scott
by Scott Rosenthal
Fri Sep 22, 2023 12:23 pm
Forum: General Discussion Forum
Topic: What year acetylene generator?
Replies: 5
Views: 297

Re: What year acetylene generator?

Good question since Ford horns and lamps had begun to transition to Black and Brass by mid 1912. Does this mean that Black generators were also being furnished at this time?
by Scott Rosenthal
Fri Aug 18, 2023 9:48 am
Forum: General Discussion Forum
Topic: Seeking 1911 steering column dimension
Replies: 3
Views: 412

Seeking 1911 steering column dimension

I'm needing to confirm length of the 1911 standard steering column housing. Measured from TDC of the lower brazed on cuff highest elevation, to the lower surface edge of the brass quadrant. One I have measures 21.5" for this dimension. The very early 1912 column should also have this same housing. R...
by Scott Rosenthal
Sun Jul 30, 2023 12:42 pm
Forum: General Discussion Forum
Topic: Reeder High Compression head
Replies: 6
Views: 714

Re: Reeder High Compression head

Many thanks Rich and Keith. Mine is very close if not identical in appearance to Rich's. A distunguishing feature is the clarity of the cast script. Notice this feature did not pull clean from the cast for whatever reason. No idea what performance is owing to this head since my 1912 engine also runs...
by Scott Rosenthal
Sun Jul 30, 2023 6:23 am
Forum: General Discussion Forum
Topic: Reeder High Compression head
Replies: 6
Views: 714

Re: Reeder High Compression head

Mine has the Ford script between "Made in USA". Candy told me at the time that Ralph was in negotiation with Ford over a licensing fee which was being demanded, this after the head was already in production. The part.cost was going to rise appreciably because of the script, so was likely.to be remov...
by Scott Rosenthal
Sat Jul 29, 2023 10:04 am
Forum: General Discussion Forum
Topic: Reeder High Compression head
Replies: 6
Views: 714

Reeder High Compression head

What are the differences among the Ralph Reeder aluminum high compression low heads? I've seen the compression ratios for this head described as both 6:1 and also 8:1? There are apparently also physical differences, where a current photo shown on the Classifieds bares no Ford script, and does not sh...
by Scott Rosenthal
Mon Jul 17, 2023 10:35 am
Forum: Classifieds - Parts
Topic: 1911 Steering Column
Replies: 0
Views: 269

1911 Steering Column

WTB 1911 or early 1912 steering column housing, as was used with 2 piece dash. Can potentially still use if damaged, but must have correct 4 mounting hole pattern. 513 three seven eight 4235.
by Scott Rosenthal
Mon Jul 17, 2023 8:06 am
Forum: Classifieds - Parts
Topic: want to buy a trailer
Replies: 3
Views: 647

Re: want to buy a trailer

Have open tandem axel aluminum FS. Reasonable, located in Cinti Ohio. 513 three seven eight 4235.
by Scott Rosenthal
Fri Jul 14, 2023 11:52 am
Forum: Classifieds - Parts
Topic: WTB 1912 double twist brass horn
Replies: 3
Views: 454

Re: WTB 1912 double twist brass horn

Thanks Mike. Any chance someone out there may be able to post a photo of the Torpedo Saxon horn stamped script?
by Scott Rosenthal
Thu Jul 13, 2023 12:01 pm
Forum: General Discussion Forum
Topic: Brass painted Black
Replies: 18
Views: 1340

Re: Brass painted Black

I have seen known original 12's and 13's with seemingly original brass lamps that are partially painted brass especially 13's with Brown 110 and 105 oil lamps. Like many other Model T components, transitions exhausted usable supplier inventories before full new part roll out.
by Scott Rosenthal
Mon Jul 03, 2023 6:29 pm
Forum: Classifieds - Parts
Topic: 1911 steering column housing
Replies: 0
Views: 393

1911 steering column housing

WTB Restorable 1911 standard steering column housing. Has0 4 round symetric dash mounting holes, not square holes. Prefer just the housing, but will purchase other steering parts if required. Scott 513 three seven eight 4235. :idea:
by Scott Rosenthal
Sun Jul 02, 2023 12:52 pm
Forum: General Discussion Forum
Topic: 1913 Rear axle housing straightening. Advice needed.
Replies: 13
Views: 1036

Re: 1913 Rear axle housing straightening. Advice needed.

Hi Jeff: Go to YOUTUBE BENT AXLE CORRECTION AND REPAIR. Curious whether this fix could fit your application.
Scott
by Scott Rosenthal
Sat Jun 24, 2023 8:43 am
Forum: Classifieds - Parts
Topic: Oil Pan 1911
Replies: 1
Views: 550

Re: Oil Pan 1911

That's going to be a tough one Serge. Fortunately others have converted the 13 to a single piece pan using a welded in repro panel. If the OEM pan cannot be had, perhaps this is a viable option.
by Scott Rosenthal
Sun Jun 04, 2023 7:50 am
Forum: General Discussion Forum
Topic: Homecoming Pictures
Replies: 25
Views: 2869

Re: Homecoming Pictures

A fabulous show with excellent weather to boot. Special thanks to the Early Ford group for their stellar presentation. Seeing the early cars starting and running was a treat. The car show has been a solid crowd pleaser since the Homecoming inception, and has become a better attraction with each pass...
by Scott Rosenthal
Tue Apr 25, 2023 9:59 am
Forum: Classifieds - Parts
Topic: 09 double twist horns
Replies: 0
Views: 388

09 double twist horns

FS double twist brass horns(2). Both pristine show pieces. One marked Nonperiel 800.00. Other has no markings 700.00. 513 three seven eight 4325.
by Scott Rosenthal
Thu Apr 06, 2023 9:02 am
Forum: General Discussion Forum
Topic: Early 6 rivet rear end question
Replies: 10
Views: 1146

Re: Early 6 rivet rear end question

Pretty sure that all clamshell housings use 6 fine thread castle nuts. Most 6 stud torque tubes have the nuts secured with a wire, but the no-rivet housings used individual cotter pins for some duration.
by Scott Rosenthal
Tue Mar 21, 2023 6:53 pm
Forum: Classifieds - Vehicles
Topic: WTB: Touring 1911 or 1912
Replies: 15
Views: 3358

Re: WTB: Touring 1911 or 1912

This is disgraceful. An apology is overdue.
by Scott Rosenthal
Sat Mar 04, 2023 8:55 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

White floor mat showed up yesterday....thanks MTFCA and thanks again Gary. This is a repro with slight yellowing patina...exactly what I was looking for.
by Scott Rosenthal
Sat Mar 04, 2023 8:50 am
Forum: General Discussion Forum
Topic: Pie wagon- Old Photo
Replies: 7
Views: 971

Re: Pie wagon- Old Photo

Thanks Mike. Are there differences between the early and later dashboard? I am assuming that the later dash had the lesser steering column angle, where this column mount has eccentric 4 bolt mounting.
by Scott Rosenthal
Sat Mar 04, 2023 7:09 am
Forum: General Discussion Forum
Topic: Base Model 1909
Replies: 4
Views: 946

Re: Base Model 1909

Buggy rail, standard equipment or purchased as accessory with optional top?
Carbide line, standard equipment or to be purchased and installed along with optional headlights? My 09 build sheet shows a generator was purchased but no mention of the gas line or headlamps.
by Scott Rosenthal
Fri Mar 03, 2023 7:22 pm
Forum: General Discussion Forum
Topic: Pie wagon- Old Photo
Replies: 7
Views: 971

Re: Pie wagon- Old Photo

Help me out here Mike....what defines the early Delivery body?
by Scott Rosenthal
Fri Mar 03, 2023 7:48 am
Forum: General Discussion Forum
Topic: Base Model 1909
Replies: 4
Views: 946

Base Model 1909

Early photos show Base Model Touring likely came without a buggy rail. Hard to tell in those photos whether the carbide gas line was a standard hardware item. Any early enthusiasts care to opine as to whether, and why or why not?
by Scott Rosenthal
Wed Mar 01, 2023 8:27 am
Forum: General Discussion Forum
Topic: Is the end of my axle half bent? 1927 Touring
Replies: 12
Views: 1202

Re: Is the end of my axle half bent? 1927 Touring

Face of the backing plate should be planar with itself. If not then I would conclude the backing plate is bent inward at its top. Any number of shop applications can be employed to correct this..myself, I would first attempt bending it cold with a large Cresent wrench, or Johnson Bar of your own cre...
by Scott Rosenthal
Fri Feb 24, 2023 6:00 pm
Forum: General Discussion Forum
Topic: 13 - 15 bulb horn
Replies: 6
Views: 940

Re: 13 - 15 bulb horn

That round base was used on latter 12 also, if not mistaken.
by Scott Rosenthal
Fri Feb 24, 2023 12:30 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

My understanding from a very reliable source is that the white mat mfr. is presently sampling a new rubber formulation, and will then determine whether to make them based on committed volume. I will purchase 6 of them.
by Scott Rosenthal
Tue Feb 21, 2023 8:09 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

A side note related to the current Black mat....have others noticed the cutout for the brake is not proper length to match the brass floorplate...looks maybe 1/2 inch short. I know...petty detail, but maybe worth looking at if the tooling is unintentionally off, and is practically correctable.
by Scott Rosenthal
Tue Feb 21, 2023 8:01 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Pardon redundance...is the tooling for the current Black mat different for some reason, and if not an obstacle, then why not present a quantity of committed buyers to the current manufacturer? Curious who RV was working with, and whether mold design issues were part of that discussion. A known featu...
by Scott Rosenthal
Mon Feb 20, 2023 11:27 am
Forum: General Discussion Forum
Topic: Early frame bracket bolts and nuts
Replies: 6
Views: 854

Re: Early frame bracket bolts and nuts

I doubt those bolts and nuts were specialty engineered. Ford did not create drawings for common mechanical hardware.
by Scott Rosenthal
Mon Feb 20, 2023 8:30 am
Forum: Classifieds - Parts
Topic: 12 spindle arm
Replies: 2
Views: 543

Re: 12 spindle arm

Sold ...thanks Rich and thx MTFCA.
by Scott Rosenthal
Sun Feb 19, 2023 4:48 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Perhaps some more noise gets attention of supplier(s)...keep it coming.

Not at all knocking the good folks who make this stuff... they need to know quantities of buyers are out there. I assume tooling for the white mats is same as the black...maybe someone can confirm this?
by Scott Rosenthal
Sun Feb 19, 2023 11:12 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Thx Mike...glad to have located one. I have a couple of Buds who have new ones, who are sitting on them, in case production does not resume. I should think there is a healthy market for these white jobs, since 6 model years used them.
by Scott Rosenthal
Sun Feb 19, 2023 6:22 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Hello Gary;
Address was sent via PM, but not sure this is working at my end.
Mailing address is
919 Mt.Hope Ave.
Cinti, Ohio 45204

Regards,
Scott
by Scott Rosenthal
Sat Feb 18, 2023 8:29 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

I would love to have it, thank you. Please text me your contact info @ 513 three seven eight 4235.
by Scott Rosenthal
Fri Feb 17, 2023 1:38 pm
Forum: Classifieds - Parts
Topic: FS 12-13 Front Axle
Replies: 1
Views: 584

Re: FS 12-13 Front Axle

Reduced to 300.00plus the ride.
by Scott Rosenthal
Fri Feb 17, 2023 12:50 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Hi Gary:
Not sure that they will not he made in the future, but have not been made for some time, and vendors have no info saying when they may be available.
by Scott Rosenthal
Thu Feb 16, 2023 11:50 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Yes that is correct
by Scott Rosenthal
Wed Feb 15, 2023 1:39 pm
Forum: Classifieds - Parts
Topic: FS Spindles with Steering Arms
Replies: 0
Views: 315

FS Spindles with Steering Arms

For Sale. Set of front axle spindles with later style steering arms. 65.00 plus freight. Phone or Text Only please. 513 three seven eight 4235.
by Scott Rosenthal
Wed Feb 15, 2023 11:35 am
Forum: Classifieds - Parts
Topic: 12 spindle arm
Replies: 2
Views: 543

12 spindle arm

FS. 12 thru 14 right side spindle arm with hole for speedo arm. 25.00 plus the ride. Call or Text only please 513 three seven eight 4235
by Scott Rosenthal
Wed Feb 15, 2023 11:32 am
Forum: Classifieds - Parts
Topic: FS 12-13 Front Axle
Replies: 1
Views: 584

FS 12-13 Front Axle

For Sale 1912-1913 front axle with spindles and spindle arms. Needs spindle bushings. Axle and spindle threads and bores good. Right side arm is correct early tapered hole for speedo part. King pins are good but are later style. 350.00 plus the ride. Call or Text only please 513 three seven eight 42...
by Scott Rosenthal
Mon Feb 13, 2023 11:50 am
Forum: General Discussion Forum
Topic: 1909 Model T Timer Source
Replies: 16
Views: 1865

Re: 1909 Model T Timer Source

Many thanks Richard. No idea who made mine...it came to me without the washer. I figure better to have it than not.
by Scott Rosenthal
Mon Feb 13, 2023 8:19 am
Forum: General Discussion Forum
Topic: 1909 Model T Timer Source
Replies: 16
Views: 1865

Re: 1909 Model T Timer Source

Can someone here post dimensions for the steel Flat Washer please. Thx.
by Scott Rosenthal
Fri Feb 03, 2023 9:40 pm
Forum: Classifieds - Parts
Topic: FTGH A/C Lamp parts
Replies: 1
Views: 490

Re: FTGH A/C Lamp parts

Atwood Castle lamp parts on their way to Randy. Thx Randy and thx MTFCA
by Scott Rosenthal
Thu Feb 02, 2023 4:17 pm
Forum: General Discussion Forum
Topic: 2 lever 09 sells tomorrow in Paris at Bonhams
Replies: 63
Views: 5636

Re: 2 lever 09 sells tomorrow in Paris at Bonhams

Genuinely sorry to learn this did not sell. Lot of challenges here, but would not be the first time when some determined enthusiast took charge...nothing showing in the photos that cannot be restored. Somebody with the capital and the stones will eventually take this on.
by Scott Rosenthal
Thu Feb 02, 2023 12:21 pm
Forum: General Discussion Forum
Topic: 2 lever 09 sells tomorrow in Paris at Bonhams
Replies: 63
Views: 5636

Re: 2 lever 09 sells tomorrow in Paris at Bonhams

Jerry....what do you make of similar 4 driver side screws?
by Scott Rosenthal
Thu Feb 02, 2023 12:18 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Not concerned about cracked edges.
by Scott Rosenthal
Thu Feb 02, 2023 11:44 am
Forum: Classifieds - Parts
Topic: 09 top rear curtain straps
Replies: 2
Views: 584

Re: 09 top rear curtain straps

Curtain straps spoken for, thx Richard and thx MTFCA.
by Scott Rosenthal
Thu Feb 02, 2023 10:03 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Still looking for one.
by Scott Rosenthal
Wed Feb 01, 2023 10:52 am
Forum: Classifieds - Parts
Topic: 09 top rear curtain straps
Replies: 2
Views: 584

Re: 09 top rear curtain straps

Last call 2,5,2023.
by Scott Rosenthal
Wed Feb 01, 2023 10:49 am
Forum: Classifieds - Parts
Topic: FTGH A/C Lamp parts
Replies: 1
Views: 490

FTGH A/C Lamp parts

Free to good home...Atwood Castle 104A brass amp parts. No glass, fonts, or burners...some usable chimney caps, housings,reflectors, faceted jewels, doors. 2 boxes of parts.
You pay shipping. If not spoken for by 2,5,2023 will be trashed. 513 Three Seven Eight 4235. Phone or Text only please.
by Scott Rosenthal
Wed Feb 01, 2023 9:42 am
Forum: General Discussion Forum
Topic: Upholstery Nails
Replies: 5
Views: 949

Re: Upholstery Nails

I assume the .56 jobs from Hillman are not what you're looking for? Not describing crown height...what are your dimsional specifics other than diameter?
by Scott Rosenthal
Mon Jan 30, 2023 1:50 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

WTB Early Floormat

WTB new/newer early White floormat. Must be very presentable.
513 Three Seven Eight 4235. Phone or text only please.
by Scott Rosenthal
Thu Jan 26, 2023 2:14 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Hear what pu're saying Larry, but what about the photos? I could understand post point of sale early photos, where I don't know whether the car came with lights, or possibility that lights were installed by a dealer, but assembly line photos are tougher to dismiss? In this part of the US, we had gas...
by Scott Rosenthal
Thu Jan 26, 2023 9:18 am
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Contemporary photos including Bruce's Black Book show acetylene hose clamps for headlamps. Curious if confirmable data supports that there were not. It would seem reasonable that period rubber hose would rapidly deteriorate, where clamps would be protection as much for gas leakage, as well as the ho...
by Scott Rosenthal
Tue Jan 24, 2023 5:51 pm
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

Re: FS 1915 clincher wheels

Rims and hubs no longer available. Thx MTFCA.
by Scott Rosenthal
Tue Jan 24, 2023 5:26 pm
Forum: Classifieds - Parts
Topic: 09-10 Brass Horn
Replies: 2
Views: 813

Re: 09-10 Brass Horn

Nonperiel horn no longer available. Thx MTFCA.
by Scott Rosenthal
Mon Jan 23, 2023 2:29 pm
Forum: Classifieds - Parts
Topic: FS 09/10 side and tail lamps
Replies: 2
Views: 570

Re: FS 09/10 side and tail lamps

Thx again John. Tail lamp has one chimney fracture shown. One of the side lamps has one. Both tough to find on the parts.
by Scott Rosenthal
Mon Jan 23, 2023 1:34 pm
Forum: Classifieds - Parts
Topic: FS 09/10 side and tail lamps
Replies: 2
Views: 570

FS 09/10 side and tail lamps

FS. 09/10 Castle 204 Side Lamps with Castle 120A barrel Tail Lamp. Exceptional originals, show quality lamps 1300.00. 513 three seven eight 4235. Phone or text only please.
by Scott Rosenthal
Sun Jan 22, 2023 12:10 pm
Forum: Classifieds - Parts
Topic: 09-10 Brass Horn
Replies: 2
Views: 813

Re: 09-10 Brass Horn

BTT 09/10 Double Twist horns.
by Scott Rosenthal
Fri Jan 20, 2023 2:14 pm
Forum: General Discussion Forum
Topic: Spinning your wheels
Replies: 8
Views: 884

Re: Spinning your wheels

Like you said Tim, 09, based on 2 hole front body mounts, no reinforcing plate in radiator, and scalloped cut rear apron. Dog ID a bit tougher.
by Scott Rosenthal
Fri Jan 20, 2023 11:03 am
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Castings are no big deal. These would need to be drilled, and then ground and then polished. The level of work required could easily equal or exceed the modifications discussed here. Vendors could put this product out there, but assume these would short run batches, and therefore costly finished pro...
by Scott Rosenthal
Wed Jan 18, 2023 9:24 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Thx Keith. Is there a Red hose resource preferred? Got some years ago,but hose looks pink? Color not a serious problem but rather like the Red.
by Scott Rosenthal
Wed Jan 18, 2023 8:24 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Yep, that's that's the one Keith. Using a coil.spring to bend it vs. brake line bending tool. Pretty much same as Bruce's photo shows. Made the brakets some time.ago, so just about to solder it all up. Did you solder ferrules on your tube ends, and did you use hose clamps or not?
by Scott Rosenthal
Wed Jan 18, 2023 1:21 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Hi Keith: Mine looks like the new one to the left above. Pretty much same approach, and really easy to do once you get to taking off material. As noted, I did have to punch the 1/4" clearance hole...I presume the barbed donor does not require this step. Now have to get sharp bends in the tubing for ...
by Scott Rosenthal
Wed Jan 18, 2023 12:23 pm
Forum: Classifieds - Parts
Topic: WTB search light base
Replies: 2
Views: 436

Re: WTB search light base

Thanks. Someone sold these as repops, but name unknown. Repop as good as original for what I want, and cheaper is better. Don't have a lot invested in this.
by Scott Rosenthal
Wed Jan 18, 2023 9:38 am
Forum: Classifieds - Parts
Topic: WTB search light base
Replies: 2
Views: 436

WTB search light base

WTB dash mount bracket for early brass search light. Material of construction not important. Hole for lamp gimble is tapered, or will be tapered, if machining required. Please text or phone only. 513 Three Seven Eight 4235.
by Scott Rosenthal
Tue Jan 17, 2023 6:46 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

I used a std 1/4 compression T, but found I still had to drill it thru...took a half hour to make. These, the clamps, and the square nuts could be a nice kit for some enterprising other. RV said he was planning to make the hardware...not sure if any were produced.
by Scott Rosenthal
Tue Jan 17, 2023 5:50 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Re: Gas line tee

Chit...still can't post photos.
by Scott Rosenthal
Tue Jan 17, 2023 5:48 pm
Forum: General Discussion Forum
Topic: Gas line tee
Replies: 20
Views: 2105

Gas line tee

Looked everywhere for acetylene line brass tee, then saw where Keith T. posted a photo of the one he made. Here's mine...Thx Keith.
by Scott Rosenthal
Tue Jan 17, 2023 4:13 pm
Forum: General Discussion Forum
Topic: Prepping Newly Rebuilt Wood Wheels for Paint
Replies: 13
Views: 1367

Re: Prepping Newly Rebuilt Wood Wheels for Paint

Yes. Even with thorough primer sealer paint, hickory wheels will soak up finish, where you may multiple touch ups.
by Scott Rosenthal
Mon Jan 16, 2023 9:31 am
Forum: Classifieds - Vehicles
Topic: FS 1917 T Coupelet - Price Reduced - Updated
Replies: 60
Views: 17986

Re: FS 1917 T Coupelet

I spoke with the late owners son who is selling this and the rest of what is a fairly sizeable collection. He comes across as car savvy, not pressed to sell, and not niave to give it away. He has been receiving offers, because mine was one of them. As to moving this to a resto project, agreed, this ...
by Scott Rosenthal
Sun Jan 15, 2023 2:16 pm
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

Re: FS 1915 clincher wheels

Tires and tubes were trashed. Edges are good, and did not roll these around without the rubber protecting them.
Thx
Scott
by Scott Rosenthal
Sun Jan 15, 2023 1:45 pm
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

Re: FS 1915 clincher wheels

Note where I've noted that my access is not working properly and not able to post photos, so I've provided the text number for anyone interested. A bonus has been fewer tire kickers when extra effort is required
Scott
by Scott Rosenthal
Sun Jan 15, 2023 7:20 am
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

Re: FS 1915 clincher wheels

These are good usable.parts with exveption of the front hubs that need new bearings. Rims cost 800.00 new useable hubs will be available at Chicasha cost 200.00. Yes,you will get stung on the shipping unless you know someone near Cinti Oh who can transport them.
by Scott Rosenthal
Sat Jan 14, 2023 7:27 pm
Forum: Classifieds - Parts
Topic: Fs 09 10 top and axle parts
Replies: 10
Views: 1310

Re: Fs 09 10 top and axle parts

Tom: Please resend me your mailing address, thx.
Scott
by Scott Rosenthal
Fri Jan 13, 2023 10:15 pm
Forum: Classifieds - Parts
Topic: Fs 09 10 top and axle parts
Replies: 10
Views: 1310

Re: Fs 09 10 top and axle parts

Buggy rail top perches sold. Thx Tom and thx MTFCA.
Scott
by Scott Rosenthal
Fri Jan 13, 2023 4:32 pm
Forum: Classifieds - Parts
Topic: 09 10 side lamp brkt castings
Replies: 3
Views: 664

Re: 09 10 side lamp brkt castings

Ask one of our vendors what they would get for a polish drilled set of these. I do not plan to make more.
by Scott Rosenthal
Fri Jan 13, 2023 4:23 pm
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

Re: FS 1915 clincher wheels

Reduced to 300.00
by Scott Rosenthal
Fri Jan 13, 2023 4:22 pm
Forum: Classifieds - Parts
Topic: FS 1912 Glass Channel
Replies: 2
Views: 518

Re: FS 1912 Glass Channel

Sold...thanks MTFCA and Greg.
by Scott Rosenthal
Fri Jan 13, 2023 10:07 am
Forum: Classifieds - Parts
Topic: FS 1912 Glass Channel
Replies: 2
Views: 518

Re: FS 1912 Glass Channel

Came off Rands W/S.
by Scott Rosenthal
Fri Jan 13, 2023 10:05 am
Forum: Classifieds - Parts
Topic: FS 1912 Glass Channel
Replies: 2
Views: 518

FS 1912 Glass Channel

FS 1912 Brass windshield setting channel for 40 X 12 inch tall top half, plus straight channel part only for the taller bottom half. Original parts, not repro. X-cond. 100.00 plus S/H 513 three seven eight 4235.
by Scott Rosenthal
Fri Jan 13, 2023 9:53 am
Forum: Classifieds - Parts
Topic: FS 1915 clincher wheels
Replies: 7
Views: 1266

FS 1915 clincher wheels

FS 1915 front and wheel wood spoked wheels with 3 inch front and 3.5 inch rear clincher rims, and hubs. Wood spokes are trash, but were previousl usable for a roller project. Sold as the set only, 400.00 plus S/H. 513 three seven eight 4235.
by Scott Rosenthal
Thu Jan 12, 2023 6:41 pm
Forum: Classifieds - Parts
Topic: FS Early frane parts
Replies: 3
Views: 730

Re: FS Early frane parts

Frame crossmember reduced 200.00 plus shipping. 513 three seven eight 4235. Please phone or text only. Thx. Scott
by Scott Rosenthal
Thu Jan 12, 2023 6:02 pm
Forum: Classifieds - Parts
Topic: 09 10 side lamp brkt castings
Replies: 3
Views: 664

Re: 09 10 side lamp brkt castings

Please text or phone me at the number shown Bill. I'm still having connection issues that I need to get with Chris to understand. Thx Scott
by Scott Rosenthal
Thu Jan 12, 2023 5:34 pm
Forum: Classifieds - Parts
Topic: 09 10 side lamp brkt castings
Replies: 3
Views: 664

09 10 side lamp brkt castings

FS 09 10 brass side lamp bracket castings. These are cartridge yellow brass without the mtg holes drilled. Preferred over steel because brass plating requires polishing which cuts thru thin plating. Vendor repros from years ago are red brass not yellow, where the color variation is conspicuous. 80.0...
by Scott Rosenthal
Thu Jan 12, 2023 5:13 pm
Forum: Classifieds - Parts
Topic: 09 top rear curtain straps
Replies: 2
Views: 584

09 top rear curtain straps

FS rear 09 curtain straps, new. Snyders Part number T-3876 LBCE. Does not include brass footman loops. Straps are black with solid brass buckles. 09 does not use D-rings but buckles directly to buggy rail. 35.00
513 three seven eight 4235.
by Scott Rosenthal
Thu Jan 12, 2023 5:12 pm
Forum: Classifieds - Parts
Topic: 09 top rear curtain straps
Replies: 0
Views: 303

09 top rear curtain straps

FS rear 09 curtain straps, new. Snyders Part number T-3876 LBCE. Does not include brass footman loops. Straps are black with solid brass buckles. 09 does not have D-rings but buckles directly to buggy rail. 35.00
513 three seven eight 4235.
by Scott Rosenthal
Thu Jan 12, 2023 5:01 pm
Forum: Classifieds - Parts
Topic: Fs 09 10 top and axle parts
Replies: 10
Views: 1310

Re: Fs 09 10 top and axle parts

Thanks John
by Scott Rosenthal
Thu Jan 12, 2023 11:04 am
Forum: Classifieds - Parts
Topic: Fs 09 10 top and axle parts
Replies: 10
Views: 1310

Re: Fs 09 10 top and axle parts

Just the perches. Find a buggy rail for 200.00, grab it