Search found 28 matches

by radiatorman
Mon May 22, 2023 7:17 pm
Forum: General Discussion Forum
Topic: Anyone heading to Luray?
Replies: 7
Views: 774

Re: Anyone heading to Luray?

It's possible the rubber hose that comes with the filter may have some additives leaching out and causing the filter to plug up.
by radiatorman
Mon May 22, 2023 6:55 pm
Forum: General Discussion Forum
Topic: Anyone heading to Luray?
Replies: 7
Views: 774

Re: Anyone heading to Luray?

1926 Ford Tudor with 500 miles on rebuilt engine and every thing else. I had been running with out a paper fuel filter down stream of the sediment bowl and decided to upgrade from a lawn mower filter to a auto type filter from local auto parts store. After installing in line filter I had engine runn...
by radiatorman
Sun Jul 17, 2022 12:28 pm
Forum: General Discussion Forum
Topic: Brakes - Rocky Mountain versus original rear drum brakes
Replies: 30
Views: 2825

Re: Brakes - Rocky Mountain versus original rear drum brakes

I have only used the emergency brake once since kids playing started to run across the road in a residual area, so I have changed my route to avoid where there is a lot of children. The one incident has triggered this investigation for additional braking capability and I use engine braking all the t...
by radiatorman
Sat Jul 16, 2022 10:47 am
Forum: General Discussion Forum
Topic: Brakes - Rocky Mountain versus original rear drum brakes
Replies: 30
Views: 2825

Re: Brakes - Rocky Mountain versus original rear drum brakes

Thanks for all the comments it gives me things to investigate more than I have at this time. I did forget to ask about the brake band material in the transmission if that impacts braking or it's more of a wear issue. My bands are cotton and would expect the wear may not be as good as Kevlar, but dri...
by radiatorman
Thu Jul 14, 2022 4:12 pm
Forum: General Discussion Forum
Topic: Brakes - Rocky Mountain versus original rear drum brakes
Replies: 30
Views: 2825

Brakes - Rocky Mountain versus original rear drum brakes

Seeking comments on upgrading braking system. In speaking too other T owners I hear Rocky Mountain is preferred except for braking in reverse and heavy rain is a possible issue. So I see there is a conversion to use the conventional rear drum brake with shoes inside the drum which may shield from wa...
by radiatorman
Fri May 06, 2022 1:53 pm
Forum: General Discussion Forum
Topic: High compression heads - 26 Tudor
Replies: 38
Views: 3396

Re: High compression heads - 26 Tudor

Thanks for the additional information on gear ratio, will need to investigate Ruckstell or changing out ring and pinion. Will need to review the options.

Thanks again for the additional feed back on gear ratio and what options I need to pursue. Since I'm retired that gives me something to do.
by radiatorman
Fri May 06, 2022 12:11 pm
Forum: General Discussion Forum
Topic: High compression heads - 26 Tudor
Replies: 38
Views: 3396

Re: High compression heads - 26 Tudor

Thanks for all of the replies, it's all ways helpful to get feed back.
The ring and pinion is 3 - 1 ratio. This was my fathers car and he had purchased the ring gear years ago before he passed away.
by radiatorman
Fri May 06, 2022 9:09 am
Forum: General Discussion Forum
Topic: High compression heads - 26 Tudor
Replies: 38
Views: 3396

High compression heads - 26 Tudor

As we venture out in the T we are seeing more hilly ground and with four adults inside we slow down to a point for a bird to land on light cross bar and relieved it's self. Current compression hot or cold is around 65 PSI with standard head and is it worth switching over to a high compression head? ...
by radiatorman
Mon Oct 04, 2021 2:20 pm
Forum: General Discussion Forum
Topic: Carburetor leaks fuel when sitting on angle (engine off)
Replies: 22
Views: 2459

Re: Carburetor leaks fuel when sitting on angle (engine off)

I have the gross valve like what is shown in the picture. Going back to standard needle valve with Viton tip. Thanks for all the responses.
96092 gross valve.jpg
96092 gross valve.jpg (81.49 KiB) Viewed 2351 times
by radiatorman
Mon Oct 04, 2021 12:08 pm
Forum: General Discussion Forum
Topic: Carburetor leaks fuel when sitting on angle (engine off)
Replies: 22
Views: 2459

Re: Carburetor leaks fuel when sitting on angle (engine off)

Thanks for the quick replies and her is more information based on questions received; 1. Front end angle of incline is 5-8 degrees. Vehicle is not leaning and forcing it to either side doesn't impact the leakage flow. The fuel is coming from a hole on the back side of the casting just above the flan...
by radiatorman
Mon Oct 04, 2021 10:16 am
Forum: General Discussion Forum
Topic: Carburetor leaks fuel when sitting on angle (engine off)
Replies: 22
Views: 2459

Carburetor leaks fuel when sitting on angle (engine off)

26 Tudor with Holley NH carburetor. It has the modern style shut off instead of the typical needle valve shut off. Other than the casting all components are new. I have checked float level and its where it should be and will shut off when I raise the float manually. Is there something I'm over looki...
by radiatorman
Fri Mar 12, 2021 8:17 am
Forum: General Discussion Forum
Topic: 26 Tudor top Vinyl installation
Replies: 6
Views: 1595

Re: 26 Tudor top Vinyl installation

Alan and Mike, Thanks for your input on eliminating the foam and going with a padding that won't crumble over time do to heat exposure, I have received the same input from others. I look at the final covering like icing on a cake, if your base isn't robust it will not hold up. Your comments are grea...
by radiatorman
Thu Mar 11, 2021 4:54 pm
Forum: General Discussion Forum
Topic: 26 Tudor top Vinyl installation
Replies: 6
Views: 1595

Re: 26 Tudor top Vinyl installation

Adam,
Headliner is in and the interior is complete, only items I have to complete is the top material and the front passenger seat. Don't know what was there before since it was my dad's vehicle and he would use what was handy. Thanks for noting the felt.
by radiatorman
Thu Mar 11, 2021 3:31 pm
Forum: General Discussion Forum
Topic: 26 Tudor top Vinyl installation
Replies: 6
Views: 1595

26 Tudor top Vinyl installation

Down to the last step in drying in our T by attaching vinyl cloth. The kit I have came with long grain material and a 1/4" thick foam pad that goes on top of the slats covered with a canvas material. My question is how far do you extend the foam over the crest of the wood frame, do you not extend it...
by radiatorman
Tue Nov 17, 2020 1:45 pm
Forum: General Discussion Forum
Topic: Long Grain fabric installation
Replies: 15
Views: 2269

Re: Long Grain fabric installation

The picture I shared isn't the latest since I have all the glass installed and the interior is complete with headliner and side panels. This project was a frame off restoration and I value the support from people on the forum and their comments in helping me move forward in completing this activity....
by radiatorman
Mon Nov 16, 2020 5:07 pm
Forum: General Discussion Forum
Topic: Long Grain fabric installation
Replies: 15
Views: 2269

Re: Long Grain fabric installation

Mark; Thanks for the quick response. My garage is heated and the heat outlet blows directly on the roof area. I read where I tack the sides by starting in the center and work my way forward ad backwards. I tried U-tube and only one came up and it had been removed. Allan; I have both versions and the...
by radiatorman
Mon Nov 16, 2020 4:11 pm
Forum: General Discussion Forum
Topic: Long Grain fabric installation
Replies: 15
Views: 2269

Long Grain fabric installation

Seeking a sanity check on attaching long grain fabric to 26 Tudor wood roof frame. Don't want to do this twice. 1. Is it best to use a tack strip or just nail directly to frame and add hidem over it? 2. Fold fabric over it self to create double thickness with or without tack strip and cover with hid...
by radiatorman
Thu Oct 22, 2020 10:24 am
Forum: General Discussion Forum
Topic: Clutch adjustment - slipping
Replies: 11
Views: 2045

Re: Clutch adjustment - slipping

Just gone through a total rebuild activity and only have two miles on it at this point and approximately three hours of engine run time. First of all I appreciate the comments and I'm in the process of revisiting all of the adjustments. I 'm looking at the brake rods as I may have them to long since...
by radiatorman
Wed Oct 21, 2020 3:59 pm
Forum: General Discussion Forum
Topic: Clutch adjustment - slipping
Replies: 11
Views: 2045

Clutch adjustment - slipping

Just getting 26 Tudor on the road and observed two things when in high gear, slippage going up slight grade and during throttle down it continues to roll freely. In referencing the model T service manual it discusses adjusting the three fingers screws to obtain a 13/16" gap between clutch shift and ...
by radiatorman
Fri Jun 19, 2020 10:04 am
Forum: General Discussion Forum
Topic: Accident today
Replies: 41
Views: 9850

Re: Accident today

Sorry to hear about your accident , glad you weren't hurt. As for the fenders you can buy new ones for around $550 via most of the Model T suppliers listed in Model T suppliers. I bought two for my 26 Tudor from Snyder's a few years ago and they needed some minor adjustments. My wife was sandwiched ...
by radiatorman
Sun Jun 14, 2020 5:53 pm
Forum: General Discussion Forum
Topic: 26 Tudor interior metal trim insert rear side windows
Replies: 0
Views: 987

26 Tudor interior metal trim insert rear side windows

Seeking to see if anyone is producing a metal insert that is covered with cloth and snaps in place between window and door latch post. The insert is 18 5/8" long and 1 1/32" wide, formed in a "U" shape with one side 0.160" and the other side 0.070" high, metal thickness 0.030". Here is picture of th...
by radiatorman
Mon Jun 01, 2020 11:49 am
Forum: General Discussion Forum
Topic: Interior panel metal clips - 26 Tudor door & side panel
Replies: 3
Views: 1800

Re: Interior panel metal clips - 26 Tudor door & side panel

Thanks for the reply about no lube, I had to ask. I have had some success on one door panel by using a small block of wood over the clip and hitting it with a rubber mallet.

Take care and thanks for response.
by radiatorman
Sun May 31, 2020 1:33 pm
Forum: General Discussion Forum
Topic: Interior panel metal clips - 26 Tudor door & side panel
Replies: 3
Views: 1800

Interior panel metal clips - 26 Tudor door & side panel

Seeking some input on the wire metal clips that you attach to the door and side panels to secure to body. Is it recommended to lubricate them for installation into the body metal? The clips came with the interior kit and I have not had much luck on insertion in to the body metal. I have achieved a n...
by radiatorman
Tue Dec 31, 2019 4:06 pm
Forum: General Discussion Forum
Topic: 26 Tudor upper door opening seal
Replies: 2
Views: 1611

Re: 26 Tudor upper door opening seal

Thanks for the reply that is more than I knew before. Have a "Happy New Year".
by radiatorman
Tue Dec 31, 2019 1:09 pm
Forum: General Discussion Forum
Topic: 26 Tudor upper door opening seal
Replies: 2
Views: 1611

26 Tudor upper door opening seal

Just received interior kit from Classtique for 26 Tudor and it looks great. But I'm missing a piece of trim or seal that is located at the top of the door opening that may seal when door is closed.The steel lip has three holes in it. Been unable to find picture on what this looks like so I can fabri...
by radiatorman
Thu Oct 17, 2019 4:43 pm
Forum: General Discussion Forum
Topic: What have you done to your T in October?
Replies: 77
Views: 23496

Re: What have you done to your T in October?

Working on hood for 26 Tudor and ran across some odd items regarding the center pivot which is the hanger rod to the cowl and radiator shield. It has a split steel tube pressed in to hold both halves together and they took a 3/8" bolt and cut the head off and ground the threads to form a taper like ...
by radiatorman
Thu Aug 15, 2019 2:27 pm
Forum: General Discussion Forum
Topic: Tudor right side door
Replies: 2
Views: 1663

Tudor right side door

Looking for a right side door for 26 Model T Tudor, I understand a 28-29 Model A truck door is the same for 26-27 Tudor. I spoke with Snyder's and a new door is $1,350, not cheap but may be only option if I can't find a used one hat can be reworked.
by radiatorman
Sat Aug 10, 2019 11:25 am
Forum: General Discussion Forum
Topic: What have you done to your T in August
Replies: 94
Views: 29188

Re: What have you done to your T in August

Been installing window glass in 26 Tudor and prepping to purchase interior kit. I have seen video with roof wood frame off to attach headliner, but don't quite understand how headliner is attached at the header of the windshield since there is no wood there. Am I missing something?