Search found 1908 matches

by Oldav8tor
Thu Mar 28, 2024 11:44 am
Forum: General Discussion Forum
Topic: Has anyone ever driven their T across the Mighty Mac?
Replies: 28
Views: 869

Re: Has anyone ever driven their T across the Mighty Mac?

I believe the crossing rate is $2 per axle. They also count axles on your trailer :D George mentioned Drummond Island... been there a few times. Drummond is more of a haven for Jeeps and off-road enthusiasts but there are plenty of places you can drive your Model T. They even give a substantial seni...
by Oldav8tor
Wed Mar 27, 2024 5:09 pm
Forum: General Discussion Forum
Topic: Coil Box Security Strap
Replies: 6
Views: 338

Re: Coil Box Security Strap

I believe the purpose of the strap is more to keep some pressure on the coils to insure they make good electrical contact. When the contacts become sprung a little folks resort to slipping business cards and the like between the box and the coils to keep the pressure on. The strap is supposed reduce...
by Oldav8tor
Wed Mar 27, 2024 5:00 pm
Forum: General Discussion Forum
Topic: Has anyone ever driven their T across the Mighty Mac?
Replies: 28
Views: 869

Re: Has anyone ever driven their T across the Mighty Mac?

While the discussion of the Mackinaw Bridge brings up many fond memories, I'd be remiss for not pointing out that Michigan has much more to offer. If you've never visited Michigan, you've missed out on seeing some beautiful scenery. Just like California isn't just Los Angeles, Michigan isn't just De...
by Oldav8tor
Tue Mar 26, 2024 10:51 pm
Forum: OT - Off topic
Topic: Bugatti bogie !
Replies: 10
Views: 181

Re: Bugatti bogie !

A good reminder for everyone to check the tightness of their rear wheel nuts before touring season gets going. Loose nuts are the number one cause of axle damage.
by Oldav8tor
Tue Mar 26, 2024 10:20 pm
Forum: General Discussion Forum
Topic: Has anyone ever driven their T across the Mighty Mac?
Replies: 28
Views: 869

Re: Has anyone ever driven their T across the Mighty Mac?

It's a beautiful drive across the bridge, regardless of what you're driving. Mackinaw City to the south and St. Ignace in the UP are both worth a visit. Lighthouses, sandy beaches, quaint shops, fudge, and many historical sites to visit should satisfy everyone in your party. To explain Adam's commen...
by Oldav8tor
Sun Mar 24, 2024 2:43 pm
Forum: OT - Off topic
Topic: Princess Kate has cancer
Replies: 2
Views: 200

Re: Princess Kate has cancer

I don't envy celebrities much, especially in times like this. You live in a fishbowl and all sorts of half-truths and fiction are printed about you. As someone who has had cancer I preferred being able to choose who I told and what I told them. I'm sure Kate is concerned about what her children will...
by Oldav8tor
Sat Mar 23, 2024 5:55 pm
Forum: General Discussion Forum
Topic: Refurbishing Steering Wheel
Replies: 13
Views: 692

Re: Refurbishing Steering Wheel

I'm with Norman - Lacking a metal core I suspect at some point when it is most inconvenient the wheel might break in your hand. I'd vote for replacement. Fordite was not one of Henry's successes.
by Oldav8tor
Sat Mar 23, 2024 5:49 pm
Forum: General Discussion Forum
Topic: My New Ride
Replies: 17
Views: 1313

Re: My New Ride

Didn't I see that truck in "Grapes of Wrath"? A truly nice original!
by Oldav8tor
Sat Mar 23, 2024 12:29 pm
Forum: General Discussion Forum
Topic: Radiator Stone Guard
Replies: 13
Views: 1283

Re: Radiator Stone Guard

I suspect "back in the day" before paved roads were common and all traffic was funneled over dirt or gravel roads that it might have been a problem. In 1979 I flew a light plane to Alaska and remember stopping at a motel along the ALCAN highway in Whitehorse. While eating dinner we watched the traff...
by Oldav8tor
Fri Mar 22, 2024 12:13 pm
Forum: General Discussion Forum
Topic: balancing beads
Replies: 18
Views: 735

Re: balancing beads

Before putting balance beads in my tires I talked to the owner of a local tire shop. He said they put balance beads in a lot of large tires used on trucks and agricultural equipment. Indeed, he says it's the only way to get some types of tires to balance at all. With tubeless tires they just throw i...
by Oldav8tor
Fri Mar 22, 2024 12:03 pm
Forum: General Discussion Forum
Topic: Radiator Stone Guard
Replies: 13
Views: 1283

Re: Radiator Stone Guard

John, have you had a problem with vehicles throwing stones at your car? Your own tires won't throw stones into your radiator so it would have to be from a vehicle either ahead of you or passing by in the oncoming lane. I drive the back roads a lot and stones never been a problem (yet). Then again, I...
by Oldav8tor
Fri Mar 22, 2024 11:56 am
Forum: General Discussion Forum
Topic: For Don Booth
Replies: 8
Views: 758

Re: For Don Booth

Don Booth is a true craftsman. He has made beautiful work of projects most of us wouldn't attempt and has been generous in sharing his progress with us.

I'm sorry if you're having problems with the forum Don. I hope you can find a way to stay.
by Oldav8tor
Thu Mar 21, 2024 11:32 am
Forum: General Discussion Forum
Topic: balancing beads
Replies: 18
Views: 735

Re: balancing beads

There is an explanation out there but it involves a little more physics and math than can be easily presented. Suffice to say that as the tires speed up the beads move to the side opposite the "heavy" side of the tire, balancing the forces. The effect is less noticeable at low speeds but as the tire...
by Oldav8tor
Tue Mar 19, 2024 11:59 am
Forum: General Discussion Forum
Topic: balancing beads
Replies: 18
Views: 735

Re: balancing beads

I can't answer your question. I can tell you that I installed Counteract balance beads 9600 miles ago and have been very happy with their performance.
by Oldav8tor
Fri Mar 15, 2024 4:51 pm
Forum: General Discussion Forum
Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
Replies: 88
Views: 3153

Re: Is a 1911 Built With Many NonOriginal Parts Worthy of being Here?

I don't know what kind of people belong to your club but you'd be very welcome in ours....Beautiful car!
by Oldav8tor
Thu Mar 14, 2024 4:05 pm
Forum: General Discussion Forum
Topic: Balance
Replies: 22
Views: 1036

Re: Balance

Prior to tire installation I installed 6 ounces of balance beads in each of my tubes. I'll have put 10,000 miles on my Universal T drivers by the end of this season. I'll probably replace the Universals with Blockleys when they wear out but the balance beads will stay. The tires wear evenly and the ...
by Oldav8tor
Thu Mar 14, 2024 11:53 am
Forum: General Discussion Forum
Topic: Using Coil Box Posts as a Junction Box
Replies: 17
Views: 583

Re: Using Coil Box Posts as a Junction Box

My 1917 has a coil box mounted switch. I'm running 12 volts and I do have a lead from the terminal strip (+) feed to the coil box battery post. I also have a tap off that post to my light switch. You mention magneto bulbs..... that's what my 17 originally had and they gave me all sorts of problems. ...
by Oldav8tor
Wed Mar 13, 2024 6:20 pm
Forum: General Discussion Forum
Topic: New day timer
Replies: 26
Views: 1738

Re: New day timer

I took the following photos after I put 5400 miles on a Tip Top New Day and Brush. I find them to be very reliable. Tip Top worked hard to develop a cap material that held it's dimensions and did not wear faster than the copper contacts.
NewDay.jpg
by Oldav8tor
Wed Mar 13, 2024 6:08 pm
Forum: General Discussion Forum
Topic: New demountable clincher rims
Replies: 5
Views: 324

Re: New demountable clincher rims

I ordered rims from Australia... unfortunately the placement of the raised "bump" behind the lugs would not allow the rims to go on the felloe far enough to make contact with the rear flange so they were just running on the lugs and the front of the felloe. The nuts won't even go all the way on the ...
by Oldav8tor
Mon Mar 11, 2024 8:56 pm
Forum: General Discussion Forum
Topic: Damage to flywheel hole for triple gear pin.
Replies: 5
Views: 614

Re: Damage to flywheel hole for triple gear pin.

When you install triple gears on the new flywheel make sure to allow adequate clearance so the bushings don't seize when they warm up. This happened in my engine - two pins twisted right out, one bushing seized so the gear spun on the bushing. Before you ask, NO, I did not assemble the transmission....
by Oldav8tor
Sat Mar 09, 2024 10:27 am
Forum: General Discussion Forum
Topic: Russ Potters Passing and Arrangements
Replies: 36
Views: 2233

Re: Russ Potters Passing and Arrangements

I was always proud to say I had a "Russ Potter" carb in my Model T. Having one of his rebuilts was equivalent to having the best available. I only got a chance to talk to him a few times but came away wiser from each conversation. He was truly one of the "great ones" of the Model T hobby and will be...
by Oldav8tor
Sat Mar 09, 2024 10:19 am
Forum: General Discussion Forum
Topic: Fuel filter
Replies: 21
Views: 860

Re: Fuel filter

I have a screen in my sediment bowl but I also added the finger screen like Dave H. Reason, if any big flakes are dislodged in my tank I don't want them drifting over the outlet and blocking it. FWIW - when I restored my car I did clean the tank and coat the interior with the stuff provided in the P...
by Oldav8tor
Fri Mar 08, 2024 10:47 am
Forum: General Discussion Forum
Topic: Fuel shut off valve
Replies: 16
Views: 866

Re: Fuel shut off valve

I've had the same can of EZ lube for over 10 years. It was expired when the guy gave it to me. He was an aircraft mechanic for Border Patrol and they had to toss it when it hit it's expiration date. Keep the can sealed and it'll be fine.
by Oldav8tor
Tue Mar 05, 2024 12:21 pm
Forum: General Discussion Forum
Topic: Oil usage
Replies: 33
Views: 1251

Re: Oil usage

All good suggestions. If your plugs aren't sealing well, I wonder what brand plugs you use? I found that Champions sealed better in my aluminum head than some other brands. Have you pulled the plug on the differential? If oil runs out that may be part of your problem. Do you have oil leaking around ...
by Oldav8tor
Mon Mar 04, 2024 6:20 pm
Forum: Classifieds - Vehicles
Topic: C/L 27 Roadster w/Crosscut Saw
Replies: 5
Views: 1008

Re: C/L 27 Roadster w/Crosscut Saw

I wouldn't want to tailgate that guy!
by Oldav8tor
Mon Mar 04, 2024 5:50 pm
Forum: General Discussion Forum
Topic: T based trailer - Sanilac County, Michigan
Replies: 6
Views: 767

Re: T based trailer - Sanilac County, Michigan

I guess I kinda hijacked the thread. However, I referred the photo to our local historical society who is going to put it out in their online newsletter. The Thumb of Michigan was once home to dense forest and was a prime target of the early lumber industry. I live near Forester - up the road is For...
by Oldav8tor
Sun Mar 03, 2024 8:11 pm
Forum: General Discussion Forum
Topic: T based trailer - Sanilac County, Michigan
Replies: 6
Views: 767

Re: T based trailer - Sanilac County, Michigan

The 1881 fire in the Thumb followed 10 years after another big fire. Interestingly, that fire was at the same time as the Chicago Fire and the Peshtigo Fire.... They think burning embers were carried hundreds of miles by the winds to ignite the Thumb fire. Getting back to 1881 - I know some of you a...
by Oldav8tor
Sat Mar 02, 2024 11:22 am
Forum: General Discussion Forum
Topic: T based trailer - Sanilac County, Michigan
Replies: 6
Views: 767

Re: T based trailer - Sanilac County, Michigan

Very interesting photo, especially since I live in Sanilac County. Our county is mostly rural although we have 42 miles of shoreline on Lake Huron with numerous summer homes. Interesting also is that our region was the first to have aid sent to us by the embryonic Red Cross after the devastating fir...
by Oldav8tor
Mon Feb 26, 2024 3:15 pm
Forum: General Discussion Forum
Topic: TT Aux Tranny?
Replies: 5
Views: 548

TT Aux Tranny?

I've been asked to help a non-hobbyist dispose of some T & TT stuff they inherited. So far I've only seen a few photos but I will be paying a visit sometime in the next month to look it over. The collection includes three C-cabs (just the cabs) and a pile of parts, but one item caught my attention. ...
by Oldav8tor
Sat Feb 24, 2024 1:26 pm
Forum: OT - Off topic
Topic: My late wife was a spend thrift!
Replies: 10
Views: 638

Re: My late wife was a spend thrift!

If nothing has gotten into the container it should be fine. Sometimes moisture will cause it to clump together but it's still ok.
by Oldav8tor
Fri Feb 23, 2024 11:53 am
Forum: General Discussion Forum
Topic: LED headlight faint flicker.
Replies: 16
Views: 701

Re: LED headlight faint flicker.

Probably not related but here goes. I have LED's all around. Headlights, running lights and brake light. The tail light bulb has two contacts, one for running and one for brake. I believe internally there is something that just makes the LED's brighter when power is applied to the brake terminal. My...
by Oldav8tor
Tue Feb 20, 2024 11:27 am
Forum: OT - Off topic
Topic: What's your MODERN? :)
Replies: 54
Views: 2066

Re: What's your MODERN? :)

2016 Jeep Renegade Trailhawk for daily driver. 2006 Dodge (Mercedes) Sprinter 3500 camper van used as a tow vehicle for hauling my T around.
IMG_0544.jpg
IMG_0562.jpg
by Oldav8tor
Fri Feb 16, 2024 10:48 am
Forum: General Discussion Forum
Topic: Turbo 400 Clutch Discs
Replies: 29
Views: 1651

Re: Turbo 400 Clutch Discs

When I had my engine rebuilt in 2019 we put in a turbo 400 clutch. It seemed to work fine to me. At 5500 miles I discovered a cracked reverse drum and triple gears that were seizing on their pins. During the tranny rebuild the rebuilders strongly suggested going back to the original metal clutch dis...
by Oldav8tor
Mon Feb 05, 2024 12:12 pm
Forum: General Discussion Forum
Topic: Slow starter
Replies: 45
Views: 1984

Re: Slow starter

Too small a cable and bad grounds are usually the culprit. There is also a known problem that occurs from time to time with starters. I've attached an article by Ron Patterson on the problem and the fix.

Good luck!
Repairing a Common Model T Starter Problem.pdf
(958.95 KiB) Downloaded 66 times
by Oldav8tor
Sat Feb 03, 2024 12:03 pm
Forum: General Discussion Forum
Topic: Will Rockford group join 10millionT trip on Lincoln Hwy?
Replies: 5
Views: 530

Re: Will Rockford group join 10millionT trip on Lincoln Hwy?

Is there is a website where we can get more info on the "10 Millionth" tour?
by Oldav8tor
Wed Jan 31, 2024 6:16 pm
Forum: General Discussion Forum
Topic: Ferrules
Replies: 12
Views: 775

Re: Ferrules

Pat, the copper aircraft line does have flared ends. It simply drains fuel from a wing tank to a center tank. In my 78 year old airplane the fuel line is exposed from the valve on the wing tank to the valve on the center tank so I can see it while flying. The line from the main tank to the firewall ...
by Oldav8tor
Tue Jan 30, 2024 3:40 pm
Forum: General Discussion Forum
Topic: Ferrules
Replies: 12
Views: 775

Re: Ferrules

A bit harsh, John.... Brass would be the way to go although some plastic ferrules are made of material that resists the components of modern fuels. worst case, you can order brass ferrules online. If your hardware is part of a national chain you can order online and have shipped to the store. To hij...
by Oldav8tor
Sun Jan 28, 2024 1:40 pm
Forum: Classifieds - Parts
Topic: Blue Crown Spark Plugs
Replies: 0
Views: 240

Blue Crown Spark Plugs

Anybody have any use for these? $15 plus actual shipping cost.
IMG_4198.jpg
by Oldav8tor
Sat Jan 27, 2024 7:44 pm
Forum: General Discussion Forum
Topic: OLD PHOTO - Snap On Sales Truck
Replies: 7
Views: 728

Re: OLD PHOTO - Snap On Sales Truck

A friend of mine in mid-Michigan is selling a replica Snap-On truck complete with period Snap On tools. The box on the back has pull-out drawers which display the tools. It has been displayed at some big events in the region and well-received. It was originally my friend's brother's project but the ...
by Oldav8tor
Wed Jan 24, 2024 4:38 pm
Forum: General Discussion Forum
Topic: Where are the national tours in 2025?
Replies: 3
Views: 481

Re: Where are the national tours in 2025?

I believe the MTFCI tour is somewhere in Minnesota.
by Oldav8tor
Wed Jan 24, 2024 3:35 pm
Forum: General Discussion Forum
Topic: Newbie seeking for advice, buying my first model T
Replies: 50
Views: 1735

Re: Newbie seeking for advice, buying my first model T

If your budget is 20k, try to find a car for under $12000. Believe me, there are plenty out there. List prices are all across the board but if you take your time investigating you'll find one. Hey, the search is a big part of the fun! While you're searching, educate yourself as much as you can so yo...
by Oldav8tor
Wed Jan 24, 2024 11:57 am
Forum: General Discussion Forum
Topic: Newbie seeking for advice, buying my first model T
Replies: 50
Views: 1735

Re: Newbie seeking for advice, buying my first model T

Our club has helped many people with their first Model T. If it lacks good maintenance records, you should plan on pulling the rear end and at the very least inspecting it. There is a good chance the front axle and linkages will require attention as well. A careful inspection of the engine may show ...
by Oldav8tor
Sun Jan 21, 2024 4:37 pm
Forum: General Discussion Forum
Topic: Hub replacement
Replies: 14
Views: 703

Re: Hub replacement

Others may disagree but if you don't want to peen the bolts, you could use loctite.
by Oldav8tor
Sun Jan 21, 2024 4:34 pm
Forum: OT - Off topic
Topic: Changing gears
Replies: 31
Views: 2382

Re: Over 20 years,,, Theft of my life's dream.

First I've heard of it. I don't know why you'd think people on this forum wouldn't care. Steve Jelf is only the latest recipient of help from members of this forum. The comments to your post are all good.... without some evidence it is very difficult to make a case. You are the only one who would kn...
by Oldav8tor
Sat Jan 20, 2024 12:04 pm
Forum: General Discussion Forum
Topic: MTFCA search results not showing in Google
Replies: 54
Views: 2270

Re: MTFCA search results not showing in Google

I did some experimenting. Yahoo and Bing don't bring up the volume of posts I used to get on google when I asked a Model T question.... google brings up nothing MTFCA. In Bing and Yahoo it helped to add MTFCA Forum at the end of the search query. It's almost like MTFCA is either being targeted or is...
by Oldav8tor
Sat Jan 20, 2024 11:25 am
Forum: General Discussion Forum
Topic: MTFCA search results not showing in Google
Replies: 54
Views: 2270

Re: MTFCA search results not showing in Google

Did you also notice the filters bar at the top of the google page used to allow the selection of "All" ? Somebody screwed up.
by Oldav8tor
Thu Jan 11, 2024 5:07 pm
Forum: General Discussion Forum
Topic: Britten's Brass Works
Replies: 3
Views: 578

Re: Britten's Brass Works

Yeah, a phone call is next - It's just if he's having problems I didn't want to add to his stress. When I was there he had two guys working with him. I believe his accident involved being struck in the head by some supplies falling from a shelf or raised storage that sent him to the hospital.
by Oldav8tor
Thu Jan 11, 2024 1:10 pm
Forum: General Discussion Forum
Topic: Britten's Brass Works
Replies: 3
Views: 578

Britten's Brass Works

Does anyone know what is happening with Rick Britten and Britten's Brass Works in Ceresco, Michigan? Back in August 2023 I dropped off a brass horn to have a new mount made and haven't heard anything since. I know Rick was injured in an accident at his business a day or so after I saw him so I've be...
by Oldav8tor
Thu Jan 11, 2024 12:58 pm
Forum: General Discussion Forum
Topic: Firewall thickness
Replies: 6
Views: 450

Re: Firewall thickness

Going from memory here. John Regan strongly recommended to me that I use Baltic Birch for my firewall, stating that it came closest to the original and was more dimensionally stable. It is sold in metric widths and I believe the 18mm was suggested, which is a little narrower than 3/4 inch. I install...
by Oldav8tor
Tue Jan 09, 2024 11:39 am
Forum: General Discussion Forum
Topic: Artist drawing Model T’s
Replies: 14
Views: 953

Re: Artist drawing Model T’s

Do you want a accurate depiction or a caricature? Makes a difference.
by Oldav8tor
Tue Jan 02, 2024 7:12 pm
Forum: General Discussion Forum
Topic: A shed for my T
Replies: 25
Views: 1322

Re: A shed for my T

I have a car collector friend that makes good use of a re-purposed shipping container. He added a fan to keep it from turning into an oven in the summer. It seals well, doesn't leak, but is a plain rectangular shape.
by Oldav8tor
Fri Dec 29, 2023 12:17 pm
Forum: General Discussion Forum
Topic: washer between rear wheel hub and axle shaft nut?
Replies: 18
Views: 901

Re: washer between rear wheel hub and axle shaft nut?

Frank - it is good you frequently check axle nut tightness. Loose nuts are the number one cause of axle failure. When you check them, remember they need to be really tight - 90 ft-lbs (122 n-m) or so.
by Oldav8tor
Tue Dec 26, 2023 5:01 pm
Forum: General Discussion Forum
Topic: Who has a Kelsey Felloe?
Replies: 12
Views: 548

Re: Who has a Kelsey Felloe?

Thanks guys! A lot of info to digest and make sense of. Just a note - looking at the Ford and Hayes rims I have the outer edge of the rim has a raised bead just inside the lugs that lightly touches the circumference of the fellow and the rear of the rim fits against the angled rear flange of the fel...
by Oldav8tor
Mon Dec 25, 2023 6:02 pm
Forum: General Discussion Forum
Topic: Who has a Kelsey Felloe?
Replies: 12
Views: 548

Re: Who has a Kelsey Felloe?

I do not have a Kelsey felloe thus the question. I used the excellent artwork from Martynn Vowell as a basis for my illustration. I simply need to know the width. I believe many of the Kelsey felloes and rims were made in Windsor, Ontario and are more common on Canadian cars and Canadian exports. I ...
by Oldav8tor
Mon Dec 25, 2023 12:56 pm
Forum: General Discussion Forum
Topic: Who has a Kelsey Felloe?
Replies: 12
Views: 548

Who has a Kelsey Felloe?

I need help from someone who has a Kelsey demountable wheel. I'm doing some research related to the design of reproduction rims and need to know the width of a Kelsey felloe. I suspect they are narrower than the typical Ford or Hayes but don't have one to check. In case you're unsure what to measure...
by Oldav8tor
Mon Dec 25, 2023 12:41 pm
Forum: General Discussion Forum
Topic: A picture is worth 1,000 words with Steve Jelf
Replies: 58
Views: 3726

Re: A picture is worth 1,000 words with Steve Jelf

Steve, if you ever doubted whether you had friends or people who cared about you, now you know. I along with the whole forum were aghast when you had your accident and have followed every stage of your recovery. Seeing the photo of you sitting in a Model T gives us all hope, which is so welcome as w...
by Oldav8tor
Fri Dec 22, 2023 10:14 am
Forum: General Discussion Forum
Topic: State of the art in 1906
Replies: 9
Views: 778

Re: State of the art in 1906

I read somewhere that in the late 1800's there was a proposal to close the patent office because everything that would ever be invented had already been made. As usual, our ability to predict the future truly sucks. I use many things routinely that my young self would have argued was impossible. To ...
by Oldav8tor
Fri Dec 22, 2023 10:09 am
Forum: General Discussion Forum
Topic: Removal of an Engine With an Aluminum Head
Replies: 15
Views: 940

Re: Removal of an Engine With an Aluminum Head

I typically lift my engine with two lifting eyes (Aluminum Z head.) It also allows me to adjust the angle as it is going in or out. I asked the engine rebuilder about the safety of using a lifting eye with a aluminum head and his comment was that it was strong enough to lift the whole car.
by Oldav8tor
Tue Dec 19, 2023 2:11 pm
Forum: OT - Off topic
Topic: Tractor Talk
Replies: 145
Views: 13138

Re: Tractor Talk

Thanks guys, I don't want to scrap the old girl....I'd just as soon keep her and put her back to work. I have chains for the turf tires and found her to be reliable, summer and winter. I haven't personally investigated anything with the hydraulics. The lever seems stiffer than normal and as soon as ...
by Oldav8tor
Tue Dec 19, 2023 10:04 am
Forum: General Discussion Forum
Topic: T tires
Replies: 9
Views: 957

Re: T tires

I'm pretty sure the ones I ordered for a friend came UPS
by Oldav8tor
Mon Dec 18, 2023 10:25 pm
Forum: OT - Off topic
Topic: Tractor Talk
Replies: 145
Views: 13138

Re: Tractor Talk

1953 Ford Jubilee (NAA). I've owned this tractor for over 25 years and use it for mowing my grass (including a 1/4 mile grass runway) and plowing snow in the winter. Not a pampered pet but a working tractor. Recently I've had a problem with the hydraulics that control the three point hitch. It's eit...
by Oldav8tor
Sun Dec 17, 2023 3:03 pm
Forum: General Discussion Forum
Topic: Filling old tack rail holes.
Replies: 14
Views: 751

Re: Filling old tack rail holes.

I agree with the other posts. I'd avoid hot glue completely. I also cut my toothpicks in half, glued them in place, let them dry and then cut them off. Finish off with a sander for a smooth surface.
by Oldav8tor
Sun Dec 17, 2023 2:58 pm
Forum: General Discussion Forum
Topic: Magneto contact
Replies: 3
Views: 246

Re: Magneto contact

I believe the contact pin is spring loaded so it does not require trimming or adjustment.
by Oldav8tor
Tue Dec 12, 2023 7:32 pm
Forum: General Discussion Forum
Topic: Covid struck again
Replies: 6
Views: 660

Re: Covid struck again

Allan is right - maybe the admin will move it. Anyway, I had kidney surgery on November 15 and think I caught covid in the hospital. Before I was symptomatic I gave it to my wife and daughter. All of us have had all the vaccinations we're eligible for and started Paxlovid the day we tested positive....
by Oldav8tor
Sun Dec 10, 2023 11:18 am
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

I don't know how I missed this but the contacts kit sold by Langs is supposed to be a match both physically and metallurgically to the originals, which Snyders is not. Looking at the photos they look correct. They cost more but in the long run I think they're worth it. PN 5001CONBQ
by Oldav8tor
Sun Dec 10, 2023 10:36 am
Forum: General Discussion Forum
Topic: My 15 won't start
Replies: 44
Views: 1877

Re: My 15 won't start

I'm sure you've confirmed the wiring is correct - sometimes folks get wires crossed on the timer. I've also come across having a timer brush installed 180° off a couple of times so it is worth checking. I'm a little suspect of your carbs. I'd recommend anyone with a car that has sat a long time to g...
by Oldav8tor
Sat Dec 09, 2023 10:25 am
Forum: General Discussion Forum
Topic: Blockley Tire import question.
Replies: 31
Views: 1703

Re: Blockley Tire import question.

Wait. I ordered some for a friend, waited until I got a shipping notice for the first set to order the second. Unfortunately, they somehow got combined together so we had to deal with folks at UPS, fill out some forms and pay duties. Me, I'd wait until the first set is out for delivery before orderi...
by Oldav8tor
Thu Dec 07, 2023 9:13 am
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

Original coil box springs feel more rigid and have a square hole to accept the shoulder of the original bolts. The cheaper repops I've seen are noticeably softer and have a round hole that has to be modified a bit to get them to fit. I've used the cheap ones to double up with the originals to give t...
by Oldav8tor
Thu Dec 07, 2023 9:04 am
Forum: General Discussion Forum
Topic: Purple Cow new owner needs help in MA
Replies: 17
Views: 1197

Re: Purple Cow help

From the posts my impression is the truck is now in Massachusetts. You might want to re-post with the title "New Owner needs help in Massachusetts." That way you'll get the attention of someone who may be able to help. Good luck!
by Oldav8tor
Wed Dec 06, 2023 12:55 pm
Forum: General Discussion Forum
Topic: How Much Gas Should a 1927 Model T Use?
Replies: 28
Views: 1600

Re: How Much Gas Should a 1927 Model T Use?

I have hydraulic rear disc brakes - still get 20 mpg.
by Oldav8tor
Mon Dec 04, 2023 9:20 pm
Forum: General Discussion Forum
Topic: How Much Gas Should a 1927 Model T Use?
Replies: 28
Views: 1600

Re: How Much Gas Should a 1927 Model T Use?

I have a 1917 with a Z high compression head and regularly get 20 mpg. Ditto to what the others said.
by Oldav8tor
Sun Dec 03, 2023 10:18 am
Forum: General Discussion Forum
Topic: Wheel Question
Replies: 3
Views: 401

Re: Wheel Question

No responses? I'm wondering if Kelsey only made loose-lug rims. The loose-lug Kelsey I have is definitely narrower than either the Ford or Hayes.
Note: I did find out that at least some Kelsey production came from Windsor, Ontario.
by Oldav8tor
Fri Dec 01, 2023 5:26 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

I have put many thousands of miles on a reproduction New Day timer from Tip Top Timers of Spokane Valley, WA. Mark Hutchinson <hutchmc@comcast.net>. He's associated with Spokane's Antique Auto Ranch. Tip Top makes Anderson and New Day Timers that are excellent quality in my opinion. The New Day is s...
by Oldav8tor
Fri Dec 01, 2023 2:24 pm
Forum: General Discussion Forum
Topic: Wheel Question
Replies: 3
Views: 401

Wheel Question

Did Kelsey ever make a steel wheel that accepted fixed-lug rims? If so, were they a little bit narrower than the Fords and Hayes felloes? By any chance, were such wheels (if they existed) often used on Canadian-built Model T's?
by Oldav8tor
Fri Dec 01, 2023 2:12 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

Oops! Forgot to mention. Since the Regan charger is connected between the magneto and the battery the question is often raised as to what happens if the diode shorts? Connecting DC directly to the mag should NEVER be done, as it can de-magnitize the magnets. Short answer is, if the diode shorts (I h...
by Oldav8tor
Fri Dec 01, 2023 1:58 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

A friend of mine had a Kingston L4 - we replaced some parts and followed the instructions but dang if we could never get it to run right. He missed half of his first multi-day tour with carb problems. His solution was to buy a Holley NH from Russ Potter. Worked great out of the box and cured his tro...
by Oldav8tor
Wed Nov 29, 2023 3:18 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

I have a 1917 - I added the starter but of course, the block is not cast to accommodate a generator. I chose to go with a John Regan magneto charger. It's simply a diode and a light bulb connecting the battery and mag post on the battery box. John produced a nice little circuit board that does the j...
by Oldav8tor
Tue Nov 28, 2023 4:44 pm
Forum: OT - Off topic
Topic: BYE..., And I do mean BYE!
Replies: 31
Views: 2327

Re: BYE..., And I do mean BYE!

Sigh......
by Oldav8tor
Mon Nov 27, 2023 7:15 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

Never hesitate to ask for help or advice. This forum is a great place for that. Also, hook up with a club if there is one near enough.
by Oldav8tor
Sun Nov 26, 2023 11:44 am
Forum: General Discussion Forum
Topic: Passing the torch
Replies: 13
Views: 1526

Re: Passing the torch

My grandparents didn't pass the torch....the kids were the only ones in the family to drive when they bought their first car, a 1917 Model T. Grandpa was born in 1860 so was 57 at the time....he and my grandmother never learned to drive.
Juhl_Flivver.jpeg
by Oldav8tor
Thu Nov 23, 2023 11:03 am
Forum: General Discussion Forum
Topic: Happy Thanksgiving
Replies: 11
Views: 707

Re: Happy Thanksgiving

I like the pitcher hanging from the side of number three. It looks like the car was parked under a tree where birds liked to roost..... surprising how much abuse Model T's took and so many survived until today.
Happy Thanksgiving!
by Oldav8tor
Wed Nov 22, 2023 9:30 am
Forum: General Discussion Forum
Topic: Removing rods from steering gearbox
Replies: 10
Views: 552

Re: Removing rods from steering gearbox

CW - I have nothing to add other than you take great photos that help a lot.
by Oldav8tor
Thu Nov 16, 2023 7:19 pm
Forum: General Discussion Forum
Topic: Re: Scat crankshafts
Replies: 22
Views: 2329

Re: Scat crankshafts

John is sooo correct. It's the way of the world now. We must adapt to the new reality. I ordered a SCAT from Langs back in June..... I talked to Langs a couple of weeks ago and they said that SCAT had only recently delivered cranks ordered in April-May. I suspect mine is one of those to that will sh...
by Oldav8tor
Mon Nov 13, 2023 11:22 am
Forum: General Discussion Forum
Topic: Coil Box rebuild
Replies: 6
Views: 428

Re: Coil Box rebuild

Tim, One of the problems that has confounded Model T owners for the last century is a poor-running car due to the formation of carbon tracks in the wood of coil boxes. Several of my friends have had that problem. Even if you put new wood in yours the problem may occur down the road. Do a search - mu...
by Oldav8tor
Sun Nov 12, 2023 1:28 pm
Forum: General Discussion Forum
Topic: New T owner, wanted to share my project
Replies: 45
Views: 2005

Re: New T owner, wanted to share my project

Your nearest club contact is in Ferrisburgh
Green Mountain T’s
c/o Ralph Shepard <mayo_shep@msn.com>
Ferrisburgh, VT 05456-9872

I strongly recommend making contact with other Model T owners. They can be a great source of advice and parts.
by Oldav8tor
Wed Nov 08, 2023 12:30 pm
Forum: General Discussion Forum
Topic: Odd spark
Replies: 11
Views: 497

Re: Odd spark

Carbon tracks once established are pretty much impossible to remove. Snyders sells a plastic replacement kit for coil boxes. Save your old contacts...they're typically a better material. I've found that doubling up the contacts (one original, one new) will help prevent them bending with use.
by Oldav8tor
Wed Nov 08, 2023 12:03 pm
Forum: General Discussion Forum
Topic: Radiator- What am I looking at?
Replies: 6
Views: 552

Re: Radiator- What am I looking at?

You need an "old time" radiator shop. Not all shops are actually equipped to do such repairs..... radiators have become "throw-aways!"
by Oldav8tor
Mon Nov 06, 2023 2:18 pm
Forum: General Discussion Forum
Topic: Who is Manny Kourounis?
Replies: 15
Views: 1115

Re: Who is Manny Kourounis?

Manny - thank you for stepping up to help Steve. I'm sure the funds will be a great comfort to him during his recovery.
by Oldav8tor
Mon Nov 06, 2023 1:45 pm
Forum: OT - Off topic
Topic: Some Humor to Brighten Your Day II
Replies: 229
Views: 18062

Re: Some Humor to Brighten Your Day II

As I've often said, there are more people in the U.S. who can fly an airplane than can drive a Model T.
by Oldav8tor
Fri Nov 03, 2023 11:38 am
Forum: General Discussion Forum
Topic: Steve Jelf 11/2
Replies: 5
Views: 1251

Re: Steve Jelf 11/2

Are the breathing issues covid related? It seems Steve can't get a break.....
by Oldav8tor
Fri Nov 03, 2023 11:36 am
Forum: General Discussion Forum
Topic: Starting local club chapter?
Replies: 8
Views: 516

Re: Starting local club chapter?

Tim's suggestion is a good one....it's worked before.
by Oldav8tor
Thu Nov 02, 2023 8:10 pm
Forum: General Discussion Forum
Topic: Berg's Radiator neck
Replies: 18
Views: 1088

Re: Berg's Radiator neck

All good ideas. I know I don't need a motometer but my daughter bought it for me and it looks cool! My filler neck is nickel plated if that makes a difference. I had this idea (pictured) of soldering a piece of brass with a flange to the top of the tank and the circumference of the neck. I'm not con...
by Oldav8tor
Wed Nov 01, 2023 6:53 pm
Forum: OT - Off topic
Topic: Some Humor to Brighten Your Day II
Replies: 229
Views: 18062

Re: Some Humor to Brighten Your Day II

One of my favorites....
curse.jpg
by Oldav8tor
Wed Nov 01, 2023 6:40 pm
Forum: General Discussion Forum
Topic: Berg's Radiator neck
Replies: 18
Views: 1088

Berg's Radiator neck

Has anyone figured out a way to secure the neck on a Bergs "black" radiator so it can support a motometer? Mine came off twice before I gave up and just use a cap. The Bergs neck is just soldered on - no mechanical attachment.
by Oldav8tor
Wed Nov 01, 2023 5:35 pm
Forum: General Discussion Forum
Topic: Scott Conger's Float-Valve
Replies: 22
Views: 1978

Re: Scott Conger's Float-Valve

I think Scott is taking a little breather from the forum and from some of his Model T activities....too much unnecessary drama on the part of some folks. I find that too bad because Scott has always been a source of sound advice. I understand the valves will be available for the foreseeable future b...
by Oldav8tor
Wed Nov 01, 2023 5:30 pm
Forum: General Discussion Forum
Topic: What oil do I use?
Replies: 38
Views: 1366

Re: What oil do I use?

I skimmed the prior responses so forgive me if I restate something already mentioned. I use Shell Rotella 15W40 non-synthetic, detergent oil. In a new engine detergent oil is fine and will help to keep it clean. If an engine is worn and has never had detergent oil then you should probably stick with...
by Oldav8tor
Fri Oct 27, 2023 9:29 pm
Forum: General Discussion Forum
Topic: Scott Conger's Float-Valve
Replies: 22
Views: 1978

Re: Scott Conger's Float-Valve

I checked my mileage before and after installing the valve. NO change! Just better performance.
by Oldav8tor
Mon Oct 23, 2023 12:54 pm
Forum: General Discussion Forum
Topic: Which timer should I keep ?
Replies: 13
Views: 592

Re: Which timer should I keep ?

Mark Hutchinson (Hutch) is the guy to talk to at TipTop. hutchmc@comcast.net or 509-220-0892 The best bargain is to get a cap and brush kit. That gives you a spare cap as well.
by Oldav8tor
Sun Oct 22, 2023 2:26 pm
Forum: General Discussion Forum
Topic: Which timer should I keep ?
Replies: 13
Views: 592

Re: Which timer should I keep ?

New Day - Tip Top Timers (Spokane Valley, WA) makes excellent replacement brushes although they cost a bit more than those from the vendors. If you want to use the original brush (assuming it's not too worn) make sure the spring has enough tension. The roll pin should be at the top of the slot in th...
by Oldav8tor
Sat Oct 21, 2023 9:32 pm
Forum: General Discussion Forum
Topic: Timer Brush Installation
Replies: 45
Views: 1282

Re: Timer Brush Installation

There are also two MTFCI chapters in PA - I second the idea of joining a local club. They can be a great source of advice and assistance.