Search found 805 matches

by Scott C.
Mon Feb 26, 2024 1:13 am
Forum: General Discussion Forum
Topic: I want one!
Replies: 6
Views: 982

Re: I want one!

That is an indexable turret.
by Scott C.
Sun Feb 25, 2024 12:31 pm
Forum: General Discussion Forum
Topic: I want one!
Replies: 6
Views: 982

Re: I want one!

by Scott C.
Sun Feb 11, 2024 2:01 am
Forum: General Discussion Forum
Topic: What Have You Done to Your Model T in February?
Replies: 35
Views: 2674

Re: What Have You Done to Your Model T in February?

After setting for a few months, the weather was nice, so I decided to get the coupe out for a drive. I set the throttle and spark, turned the mixture a quarter turn to richen the mixture. I pulled the choke and then turned the switch to battery. It fired right up without touching the crank or the st...
by Scott C.
Tue Nov 28, 2023 12:34 pm
Forum: General Discussion Forum
Topic: New T owner looking for some advice
Replies: 118
Views: 7677

Re: New T owner looking for some advice

Something else, that no one has mentioned yet, is to tear down the rear axle and get rid of the old Babbit thrust washers before they fail. It is not a matter of if, it is a matter of when. Because they will fail, they are old and fragile. If you are proactive and take care of this upfront, it will ...
by Scott C.
Tue Nov 21, 2023 12:39 pm
Forum: General Discussion Forum
Topic: Cracked block
Replies: 22
Views: 1611

Re: Cracked block

We do not use it very often. We only use it on exterior surfaces like oil pan rails and end faces where there is not much heat transfer and only to fil voids. Most of those kinds of defects actually get welded. We machine damaged features and plug, or sleeve them also, then machine them to print. Al...
by Scott C.
Tue Nov 21, 2023 1:53 am
Forum: General Discussion Forum
Topic: Cracked block
Replies: 22
Views: 1611

Re: Cracked block

I work for Caterpillar at the Large Engine Center. We do not use Belzona to repair cracks. We only use it as a filler for voids in the surface of a casting. Another good product that is now available is Lock-N-Stitch. We do use their repair inserts on threaded holes on our big blocks. When I worked ...
by Scott C.
Sun Nov 19, 2023 12:14 pm
Forum: General Discussion Forum
Topic: Firewall hole
Replies: 7
Views: 498

Re: Firewall hole

It is for the later version with the swivel top carburetor control rod. Here is a picture of my 25 roadster pick up.
IMG_1089.JPG2.JPG
by Scott C.
Sun Oct 01, 2023 11:40 am
Forum: General Discussion Forum
Topic: Split rims for wood wheels
Replies: 8
Views: 404

Re: Split rims for wood wheels

I have a set of reproduction 21"split rims on my 26 coupe. They were mad by Stephen Hood. He is Vintage Rims Australia. I also have a set of 30x3.5's on my 25 pickup.
IMG_1283 (2).jpg
IMG_2478 (5).jpg
by Scott C.
Thu Sep 14, 2023 12:34 pm
Forum: Classifieds - Parts
Topic: WTB: Left Side Small Drum Housing
Replies: 3
Views: 214

Re: WTB: Left Side Small Drum Housing

Thanks Mark, I will check into it.
by Scott C.
Thu Sep 14, 2023 1:08 am
Forum: Classifieds - Parts
Topic: WTB: Left Side Small Drum Housing
Replies: 3
Views: 214

WTB: Left Side Small Drum Housing

I am looking for a left side rear end housing for the small drum axle in my 25 pickup. Or a complete rear axle.
by Scott C.
Thu Sep 07, 2023 1:26 am
Forum: General Discussion Forum
Topic: Steve Jelf needs help
Replies: 30
Views: 2279

Re: Steve Jelf needs help

I have some tubes in Waynetown.
by Scott C.
Sun Sep 03, 2023 4:47 pm
Forum: Classifieds - Parts
Topic: WTB ignition switch '25
Replies: 16
Views: 1027

Re: WTB ignition switch '25

I got the tumbler turning with a 57 key. It locks the key in when turned to battery and mag. I got all the screws out and tested it with an ohm meter and all the contacts are making. It should be a good restorable switch.
by Scott C.
Sun Sep 03, 2023 12:24 pm
Forum: Classifieds - Parts
Topic: WTB ignition switch '25
Replies: 16
Views: 1027

Re: WTB ignition switch '25

It probably is a Clum, it has that same triangle marking on the back. The tumbler looks good, I can get a key in it but, it does not turn. I sprayed some PB Blaster in it for now. The headlight switch does turn.
by Scott C.
Sat Sep 02, 2023 10:57 pm
Forum: Classifieds - Parts
Topic: WTB ignition switch '25
Replies: 16
Views: 1027

Re: WTB ignition switch '25

I finally received that box of parts. Here are some pictures of that switch.
thumbnail (9).jpg
thumbnail (10).jpg
thumbnail (11).jpg
by Scott C.
Thu Aug 31, 2023 1:42 am
Forum: General Discussion Forum
Topic: Looking for Stevens Front Axle tool owners
Replies: 20
Views: 1073

Re: Looking for Stevens Front Axle tool owners

I have a couple of them here in Indiana.
by Scott C.
Thu Aug 31, 2023 1:08 am
Forum: General Discussion Forum
Topic: This nut is nuts
Replies: 14
Views: 1061

Re: This nut is nuts

If I did the math correctly. 21/32" is 18.237 MM. So, that would be just .0093" larger than 18 MM.
by Scott C.
Sun Aug 20, 2023 1:25 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Excellent navigating Steeve. Can you guess where we are going on this drive? Here is episode #4.
Enjoy!

https://www.youtube.com/watch?v=09NZ04yU3vc
by Scott C.
Fri Aug 18, 2023 1:15 am
Forum: Classifieds - Parts
Topic: WTB ignition switch '25
Replies: 16
Views: 1027

Re: WTB ignition switch '25

I am still waiting on those parts to arrive. I will let you know when ever that happens.
by Scott C.
Thu Aug 17, 2023 12:28 pm
Forum: General Discussion Forum
Topic: Odd Clincher Rim
Replies: 2
Views: 241

Odd Clincher Rim

What is this single lug rim?
odd rim 1a.jpg
odd rim 2a.jpg
by Scott C.
Fri Aug 11, 2023 1:14 am
Forum: Classifieds - Parts
Topic: WTB ignition switch '25
Replies: 16
Views: 1027

Re: WTB ignition switch '25

I bought box of miscellaneous parts and I think there might be one in the mix. I will know in a few days when the box arrives here.
by Scott C.
Sun Jul 16, 2023 12:17 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Who wants to go for another drive? This time we will drive the 26 Roadster.
Enjoy!

https://www.youtube.com/watch?v=jC7FZdJ90qM
by Scott C.
Mon Jul 10, 2023 11:28 am
Forum: General Discussion Forum
Topic: I put Model A wheels on my T...
Replies: 12
Views: 1075

Re: I put Model A wheels on my T...

So, you didn't have them on there before you swapped wheels too? There is a dust cap for the hub and a hub cap for the wheel. Images from Lang's website.

Image

Image
by Scott C.
Mon Jul 10, 2023 1:33 am
Forum: General Discussion Forum
Topic: I put Model A wheels on my T...
Replies: 12
Views: 1075

Re: I put Model A wheels on my T...

Steve, I noticed that you are running without the caps on the end of your front hubs. Are you not concerned about contamination getting into your wheel bearings?
by Scott C.
Fri Jul 07, 2023 1:48 am
Forum: General Discussion Forum
Topic: New split rims
Replies: 11
Views: 1045

Re: New split rims

I have 2 sets of them from Steve Hood in Australia. One set is on my 26 Coupe and the second set, I have not used yet. They are still in the packaging.
IMG_1280 (2).jpg
by Scott C.
Wed Jul 05, 2023 9:12 pm
Forum: Classifieds - Parts
Topic: WTB: Steering Shaft
Replies: 8
Views: 681

Re: WTB: Steering Shaft

The 26-27 is a 5 to 1 ratio. The top of the shaft where the gears and pins go should have a 5 stamped into it. The hole spacing is different than the earlier 4 to 1 type. I believe that all of the reproduction shafts are 5 to 1. The 26-27 column has a square mounting plate where if bolts to the cowl...
by Scott C.
Wed Jul 05, 2023 4:14 pm
Forum: Classifieds - Parts
Topic: WTB: Steering Shaft
Replies: 8
Views: 681

Re: WTB: Steering Shaft

Still looking.
by Scott C.
Wed Jul 05, 2023 1:31 pm
Forum: General Discussion Forum
Topic: Stewart Tire Tool Question
Replies: 2
Views: 329

Stewart Tire Tool Question

Has anyone ever seen, or used this tool?
Stewart off and on tire tool.png
by Scott C.
Wed Jul 05, 2023 12:59 pm
Forum: General Discussion Forum
Topic: Engine Stand help
Replies: 11
Views: 903

Re: Engine Stand help

Here is a picture of an engine on my stand. The stand I built in high school as a shop class project. The plate is the one that the vendors sell.
IMG_1452 (3).jpg
by Scott C.
Wed Jul 05, 2023 12:51 pm
Forum: Classifieds - Parts
Topic: WTB: Steering Shaft
Replies: 8
Views: 681

Re: WTB: Steering Shaft

I sent you a PM.
by Scott C.
Mon Jul 03, 2023 10:28 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

OK, how about a little intermission video between our drives? I added some banjo music to this one.

https://www.youtube.com/watch?v=s89qMkfFAWE
by Scott C.
Mon Jul 03, 2023 10:05 pm
Forum: Classifieds - Parts
Topic: WTB: Steering Shaft
Replies: 8
Views: 681

WTB: Steering Shaft

I am needing a good steering column shaft for my 26 Coupe. The vendors are all out of stock. Does anyone have a new one lying around or, a good used one that you are willing to sell? Or even a complete steering column with a good shaft.
by Scott C.
Sun Jul 02, 2023 4:06 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in July?
Replies: 38
Views: 2972

Re: What have you done to your Model T in July?

I replaced the flapper timer on my 25 RPU with a new Tip Top New Day timer. It ran better, but the mag has been week since I purchased it a few years ago. So, today I recharged the magneto. I used 3, 12 volt batteries, found a north pole with a compass and zapped it 8 times. The result was successfu...
by Scott C.
Sat Jul 01, 2023 11:28 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Looking at that drawing, I cannot tell the difference between the Hayes 2845B and the Ford 2845D. The same goes with the Ford 2845B and the Ford 2845C. So, will a fixed lug rim fit a loose lug felloe? Plus the Kelsey's appear to be 2 piece felloes. The one felloe that I am thinking is a Hayes, has t...
by Scott C.
Sat Jul 01, 2023 3:30 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Thanks for all the input. I think Scott has hit the nail right on the head. I am just looking for clarification on the felloes. Maybe Hayes did make 2 types, I do not know. However, according to the drawing, that we all believe to be correct, Steve's felloe appears to be a Ford. I realize too, that ...
by Scott C.
Sat Jul 01, 2023 1:44 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

OK, let's try to clarify what type of felloes and rims that I currently have. I am getting conflicting information. The 2 pictures above are of the 2 different rims that I have. I have been told that the top one is a Hayes and the bottom one is either a Hayes, or something else. I received this draw...
by Scott C.
Thu Jun 29, 2023 1:31 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I have put a few miles on it and the rims are working fine. I received an email back Steve and he is making me a replacement rim for the one that does not fit.

I did notice that I have some loose spokes. So, I am thinking that I need to find a set of wheels to rebuild.
by Scott C.
Thu Jun 29, 2023 1:25 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

I have driven it around a bit and the rims seem to be working fine. I finally heard back from Steve and he is in the process of making me a replacement for the one that does not fit. I noticed that I have some spokes that are getting loose. I think I might need to find a set of wheels and rebuild th...
by Scott C.
Sun Jun 25, 2023 12:06 pm
Forum: General Discussion Forum
Topic: FIREWORKS
Replies: 0
Views: 383

FIREWORKS

They had the annual Freedom Festival here yesterday that ends with a fireworks display. I filmed some of it with my Iphone.

Enjoy the show!

https://www.youtube.com/watch?v=0m5lmRuj9Os
by Scott C.
Sun Jun 25, 2023 11:45 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Thank you for letting me know that you enjoy these little videos.

Here is episode #34, the final episode of this drive.
Enjoy!

https://www.youtube.com/watch?v=GaPh4Nswzc8
by Scott C.
Thu Jun 22, 2023 2:35 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

OK, I beat 4 rims on, off and back on one of the felloes then checked the runout. Then I moved on to another felloe and repeated the same. One rim will not go onto any of the felloes. Here is where I am now. I have 4 rims mounted on the truck. The worst runout is about 1/4" at the side wall of the t...
by Scott C.
Thu Jun 22, 2023 2:24 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

Here are picture of the felloes. If I am looking correctly at that chart, the cross section of the top one appears to be a Hayes. The bottom one appears to a Ford. That coincides with what Scott has stated. But contradicts Steves picture. Is Steve's wheel a Ford, or a Hayes? or, is chart wrong? rims...
by Scott C.
Thu Jun 22, 2023 2:15 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

The wheels had been blasted, primed and painted when it was restored in 2010. So, the paint should not be an issue. However, I am happy to report that I now have 4 of them mounted on the truck!! The worst runout is about 1/4" at the side wall of the tire. I started with one felloe and beat all 4 of ...
by Scott C.
Wed Jun 21, 2023 1:19 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

I see what you are saying about the way that second felloe appears to be modified. I will take a closer look at it. That is the one that the rim wobbles more than I like. I will also look at the other rear felloe and confirm what type it is. I think it is the same as the top one. I have not messed w...
by Scott C.
Tue Jun 20, 2023 1:41 pm
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

Here are pictures of 2 of my felloes.
rims 10.jpg
rims 11.jpg
by Scott C.
Tue Jun 20, 2023 1:05 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Here are pictures of 2 of my felloes. The top one is the rear one that I drove the rim onto. I was able take if and lay it on a block of wood and drive it off.
The bottom one is a front one. I can get 1 rim on with a little more wobble than I like.
rims 10.jpg
rims 11.jpg
by Scott C.
Tue Jun 20, 2023 2:11 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

Re: WTB: 30X3.5 Rims

I think I have Hayes felloes but am not 100% sure. I have not been able to find anything that clearly shows the differences.
by Scott C.
Tue Jun 20, 2023 1:32 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I am glad to hear that your rims fit well.

I tried to remove the one that I drove onto the felloe with a dead blow hammer. It does not want to come off. I hope I don't damage my spokes trying to get it back off!

I still have heard back again from Steve.
by Scott C.
Mon Jun 19, 2023 1:36 am
Forum: General Discussion Forum
Topic: 1926-27 rear light / licence bracket - Canadian?
Replies: 8
Views: 862

Re: 1926-27 rear light / licence bracket - Canadian?

Here is a picture of the one on my 27.
tail light.jpg
by Scott C.
Sun Jun 18, 2023 1:24 am
Forum: Classifieds - Parts
Topic: WTB: 30X3.5 Rims
Replies: 20
Views: 1291

WTB: 30X3.5 Rims

After fighting with the new reproduction rims that I bought for my 25 RPU, I am thinking that I need to go with original rims. I would like to buy some good Hayes, or Ford style 30 x3.5 rims.
by Scott C.
Sat Jun 17, 2023 1:54 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I reinstalled an old rim on that rear wheel and it fits fine and has less run out than the new rims I am now sure that the felloe is not bent. I have an old picture that you can clearly see that the original rim seats up fine to that felloe. Whereas the new ones do not. I am to the point that I am t...
by Scott C.
Sat Jun 17, 2023 1:44 am
Forum: General Discussion Forum
Topic: 1926-27 rear light / licence bracket - Canadian?
Replies: 8
Views: 862

Re: 1926-27 rear light / licence bracket - Canadian?

Here is a picture of the one my 25 RPU.
IMG_1093 - Copy (2).JPG
by Scott C.
Fri Jun 16, 2023 11:49 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I mounted my tires first, without test fitting the rims. I now know that I should have done that. I have 2 rims hat will not go on. I tried them on 3 different felloes so far. The first one, that I drove on with a dead blow hammer runs very true. The second one, that I struggled with has more wobble...
by Scott C.
Thu Jun 15, 2023 1:47 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

How much torque should I put on the lug nuts? If a felloe is bent a little bit, can I shim the rim lugs to make the tire run true?
by Scott C.
Wed Jun 14, 2023 2:16 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I am making some progress! I tried to put that rim on one of the front felloes and had the same issue. I tried another rim on the front felloe and it went on easily. So, I took it back off and put it on that rear felloe. It went on ok. I think that felloe is tweaked a bit. Not sure, if I did that wi...
by Scott C.
Tue Jun 13, 2023 1:46 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Here are the lugs next to the stems on the 2 original rims. They are both elongated in and away from the stem, just like the one in Dan's picture. Neither one appears to be original. They both look to have been done by hand. I removed the bolts and layed the wheel flat on the floor and the rim still...
by Scott C.
Mon Jun 12, 2023 1:05 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I have mailed Steve about the issue and have not heard back from him yet. But I think Dan "hit the nail right on the head"! The bolts do not all line up perfectly. I assumed it was mainly that the rim was not square to felloe when starting them on. Here is a picture of the lug hole next to the valve...
by Scott C.
Mon Jun 12, 2023 1:33 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I found this picture. It appears that my new rims are the Ford type 2845B. I have read that the Ford and the Hayes should work interchangeably. So, my next question is How to identify the different felloes? I see the notch in that Hayes felloe in your picture. What else do I need to look at? 667950....
by Scott C.
Sun Jun 11, 2023 1:41 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

The one on the top and on the right is the new one. The next one came off that wheel. The bottom and left one is from the other rear wheel.
by Scott C.
Sun Jun 11, 2023 1:05 pm
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Here are some pictures. I tried another rim on that same wheel with the same results. Is it possible that I have a bent felloe?

rims 4.jpg
rims 3.jpg
rims 2.jpg
rims 1.jpg
by Scott C.
Sun Jun 11, 2023 11:59 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

Allan, just the opposite. They will not seat against the felloe on the back side. That causes them to have runout. There is a bead rolled into the rim and it will not let the rim all the way on the felloe.
by Scott C.
Sun Jun 11, 2023 1:23 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #33 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=vuB1aHzFJlM
by Scott C.
Sun Jun 11, 2023 1:15 am
Forum: General Discussion Forum
Topic: tube question 30x3-1/2 demountables
Replies: 53
Views: 3280

Re: tube question 30x3-1/2 demountables

I just mounted my new Firestone tires, with new tubes and flaps onto my new rims from Australia too. The stem holes are off center a bit. The original ones are in the center. I think they will be fine. This is the first time for me working with clincher rims. The problem that I am having is that the...
by Scott C.
Fri Jun 09, 2023 1:40 am
Forum: General Discussion Forum
Topic: Valve stem wear
Replies: 11
Views: 964

Re: Valve stem wear

We used the UTP knurling tools. They are far superior to the KD type knurling tools like Goodson sells. There are different sizes cutter wheels for guides that had more wear. They came in sizes from .155 up to .195. The reamers are in .001" increments, not just a one pass process like the others. Th...
by Scott C.
Thu Jun 08, 2023 1:12 am
Forum: General Discussion Forum
Topic: Valve stem wear
Replies: 11
Views: 964

Re: Valve stem wear

Back in the day, when I was rebuilding engines for a living. I would replace any valve with .002" wear on the stem. I would always knurl the valve guides. If they did not clean up completely when reamed, I would either replace or sleeve them, depending on whether they were cast in or press fit.
by Scott C.
Mon Jun 05, 2023 12:57 am
Forum: General Discussion Forum
Topic: Steven at Fliver channel has some new videos
Replies: 8
Views: 1161

Re: Steven at Fliver channel has some new videos

I like watching Steven's videos too. It nice to know that I am not the only crazy guy driving around in a Model T with a GoPro!!
by Scott C.
Sun Jun 04, 2023 3:00 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #32 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=Y0AIKt2yUyY
by Scott C.
Mon May 29, 2023 11:09 pm
Forum: General Discussion Forum
Topic: New tires
Replies: 17
Views: 1495

Re: New tires

I have a set of those on my 26 roadster. They were on the car when i bought it. They seem to be wearing very well so far.
by Scott C.
Sun May 28, 2023 11:16 pm
Forum: General Discussion Forum
Topic: I want to go camping with these guys!!
Replies: 15
Views: 1853

Re: I want to go camping with these guys!!

Dennis, thanks for replying to my post! That looks like a great time to me. Am I correct in assuming that you have a Ruckstell in your roady? What size are those tire chains? What kinds of modifications have you done to it, to make it trail worthy?
by Scott C.
Sun May 28, 2023 1:06 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #31 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=WyD05kGZIeU
by Scott C.
Sat May 27, 2023 2:18 am
Forum: General Discussion Forum
Topic: I want to go camping with these guys!!
Replies: 15
Views: 1853

I want to go camping with these guys!!

I stumbled onto this video. These guys are my kind of men! How many of you would do this? Anyone know who they are? Looks like they had a great time!


https://www.youtube.com/watch?v=JyVXQ0wn440
by Scott C.
Sun May 21, 2023 11:46 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #30 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=8bo6nJrSE3Q
by Scott C.
Sun May 14, 2023 11:50 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #29 of my drive on 9/10/2022.
Enjoy!

[url][https://www.youtube.com/watch?v=igz9ePMpE1w/url]
by Scott C.
Sun May 07, 2023 1:41 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #28 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=d3lXrH4t3CE
by Scott C.
Sun Apr 30, 2023 1:59 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #27 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=27xtlnyUCa8
by Scott C.
Sun Apr 23, 2023 11:41 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #26 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=4pH_MxT8LSE
by Scott C.
Sun Apr 16, 2023 2:17 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Steve, you passed right thru my area that day!

Here is episode #25 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=LVfWNk_vEdc
by Scott C.
Sat Apr 15, 2023 1:43 am
Forum: Classifieds - Parts
Topic: WTB: Ignition Switch Tumbler
Replies: 11
Views: 1089

Re: WTB: Ignition Switch Tumbler

Does anyone have a complete switch assembly for a 25?
by Scott C.
Wed Apr 12, 2023 1:18 am
Forum: Classifieds - Parts
Topic: WTB: Ignition Switch Tumbler
Replies: 11
Views: 1089

Re: WTB: Ignition Switch Tumbler

What I am looking for is for the dash mounted switch. It's the one on the left in the bottom picture that Frank posted. I think that I only need the tumblers, but willing to buy entire switches.
by Scott C.
Tue Apr 11, 2023 1:29 am
Forum: Classifieds - Parts
Topic: WTB: Ignition Switch Tumbler
Replies: 11
Views: 1089

Re: WTB: Ignition Switch Tumbler

Still looking.
by Scott C.
Sat Apr 08, 2023 11:10 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #24 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=csb_hc__nK8
by Scott C.
Tue Apr 04, 2023 1:13 am
Forum: Classifieds - Parts
Topic: WTB: Ignition Switch Tumbler
Replies: 11
Views: 1089

Re: WTB: Ignition Switch Tumbler

Rick, I sent you a text. I actually need 2 of them, one for a 25 and one for a 26.
by Scott C.
Mon Apr 03, 2023 1:11 am
Forum: Classifieds - Parts
Topic: WTB: Ignition Switch Tumbler
Replies: 11
Views: 1089

WTB: Ignition Switch Tumbler

I am looking for a good ignition switch tumbler. Does anyone have one, or a complete switch that they are willing to part with?
by Scott C.
Sun Apr 02, 2023 1:52 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #23 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=PQCEz8u8zsI
by Scott C.
Sun Mar 26, 2023 1:47 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #22 of my drive on 9/10/2022. We finally arrive at our destination.
Enjoy!

https://www.youtube.com/watch?v=2_nTMwUFU98
by Scott C.
Sun Mar 05, 2023 12:20 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #21 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=YqypwlYIQXE
by Scott C.
Sun Feb 26, 2023 11:50 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #20 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=vLa4T6M0o80
by Scott C.
Sun Feb 19, 2023 12:01 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

We are getting close to our destination for the day.

Here is episode #19 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=4LQycb6sCKU
by Scott C.
Sun Feb 12, 2023 1:51 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #18 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=wonJMGCqDAU
by Scott C.
Sun Feb 05, 2023 1:48 am
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #17 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=K4S7rUpUu5Q
by Scott C.
Sun Jan 29, 2023 12:05 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #16 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=-tHyvRE1d1I
by Scott C.
Sun Jan 22, 2023 12:13 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #15 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=CS6LcrmxZ48
by Scott C.
Mon Jan 16, 2023 1:34 am
Forum: General Discussion Forum
Topic: What have you done with your Model T in January
Replies: 40
Views: 4609

Re: What have you done with your Model T in January

I installed a freshly rebuilt generator from Jeff Stevenson on my 26 Roadster.
by Scott C.
Sun Jan 15, 2023 12:06 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #14 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=TBEBxtl-QDA
by Scott C.
Wed Jan 11, 2023 1:45 am
Forum: Classifieds - Parts
Topic: WTB: Top Saddles
Replies: 15
Views: 2021

Re: WTB: Top Saddles

Still looking for a set of saddles.
by Scott C.
Wed Jan 11, 2023 1:44 am
Forum: Classifieds - Parts
Topic: WTB: 26-27 Switch Plate
Replies: 4
Views: 779

Re: WTB: 26-27 Switch Plate

Still looking for a nice switch plate.
by Scott C.
Sun Jan 08, 2023 12:18 pm
Forum: General Discussion Forum
Topic: Today's Social Distancing Video
Replies: 451
Views: 118875

Re: Today's Social Distancing Video

Here is episode #13 of my drive on 9/10/2022.
Enjoy!

https://www.youtube.com/watch?v=K5mAnOoRcnM