Search found 219 matches
- Sat Mar 30, 2024 6:22 pm
- Forum: Classifieds - Parts
- Topic: FS 3" Diameter Raised Edge Adjustable crankshaft fan belt pulley
- Replies: 2
- Views: 249
Re: FS 3" Diameter Raised Edge Adjustable crankshaft fan belt pulley
Count me in Neal. Sending you an email to buy it.
- Tue Mar 26, 2024 6:30 am
- Forum: Classifieds - Parts
- Topic: Offset Racing Spindles
- Replies: 1
- Views: 339
Re: Offset Racing Spindles
I’ll buy them. Sending email. Thanks
- Mon Feb 19, 2024 6:04 pm
- Forum: Classifieds - Parts
- Topic: BEWARE
- Replies: 14
- Views: 1829
Re: BEWARE
Open platform problems!
- Fri Feb 09, 2024 9:34 pm
- Forum: General Discussion Forum
- Topic: Help ID my rear hub
- Replies: 3
- Views: 313
Re: Help ID my rear axle and hub
You’re right Jerry! Brian fart on my end I’ve never seen this design before on the hub. Just curious to see the feedback from the group.
- Fri Feb 09, 2024 9:24 pm
- Forum: General Discussion Forum
- Topic: Help ID my rear hub
- Replies: 3
- Views: 313
Help ID my rear hub
I wasn’t successful at finding any info online for “taped rear hub” via the MTFCA site.
Most likely operator inability to use the right phrases
Thanks for any insight on this piece.
[image][/image]
Most likely operator inability to use the right phrases
Thanks for any insight on this piece.
[image][/image]
- Sun Jan 28, 2024 9:25 am
- Forum: Classifieds - Parts
- Topic: FS: T in Portland TN
- Replies: 0
- Views: 325
FS: T in Portland TN
Not mine nor given the option to post in the vehicles section. Just wanted to share to the community.
https://www.facebook.com/marketplace/it ... 334343922/
https://www.facebook.com/marketplace/it ... 334343922/
- Thu Jan 11, 2024 10:27 pm
- Forum: Classifieds - Parts
- Topic: Watch out for scammer +1 (251) 721-9731
- Replies: 3
- Views: 457
Re: Watch out for scammer +1 (251) 721-9731
Well played Tim!!
- Sun Nov 26, 2023 4:32 pm
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
Re: FS - Winfield Choke Horns
to the top
- Sun Nov 19, 2023 7:29 pm
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
Re: FS - Winfield Choke Horns
Bump.
$210 for the choke elbow
$210 for the choke elbow
- Wed Nov 08, 2023 9:15 pm
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
Re: FS - Winfield Choke Horns
Bump…… . . .
- Sun Nov 05, 2023 9:10 am
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
Re: FS - Winfield Choke Horns
Ball horn is headed to Ohio. Thank you!
- Fri Nov 03, 2023 7:44 am
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
Re: FS - Winfield Choke Horns
Additional pix
- Fri Nov 03, 2023 7:42 am
- Forum: Classifieds - Parts
- Topic: FS - Winfield Choke Horns
- Replies: 7
- Views: 785
FS - Winfield Choke Horns
I’ve two fully functioning Winfield choke horns. The ball horn is for the small choke (A size) Model M carbs. The elbow, I’m not sure. It does not fit the 5V , nor the 6V I think.
$240 for the Elbow
$110 for the ball horn/silencer SOLD
Shipping in USPS flat rate box to be added.
$240 for the Elbow
$110 for the ball horn/silencer SOLD
Shipping in USPS flat rate box to be added.
- Mon Oct 02, 2023 2:53 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Offset Spindles
- Replies: 2
- Views: 370
Re: For Sale: Offset Spindles
I'll take em Bruce. I just emailed you. Thanks,
- Wed Jul 19, 2023 11:34 am
- Forum: Classifieds - Parts
- Topic: F. S. Sure stop disc brakes. Sold pending payment.
- Replies: 6
- Views: 1665
Re: F. S. Sure stop disc brakes. Sold pending payment.
Are these the same brakes I bought from you a few years ago that didn't look good on the brass car?
- Wed Jul 19, 2023 1:32 am
- Forum: Classifieds - Parts
- Topic: FS: Aluminum Hogs Head
- Replies: 0
- Views: 290
FS: Aluminum Hogs Head
$125 Plus the ride to lower 48. Or stop by in Nashville to pick up.
C pedal is firm... no slop! No cracks found during inspection. I can send additional pictures as requested.
Email me if you have any questions.
C pedal is firm... no slop! No cracks found during inspection. I can send additional pictures as requested.
Email me if you have any questions.
- Sun Jun 25, 2023 12:36 pm
- Forum: Classifieds - Parts
- Topic: FS… Windshields
- Replies: 1
- Views: 637
Re: FS… Windshields
Repost . . . . .
- Thu Jun 08, 2023 10:14 pm
- Forum: Classifieds - Parts
- Topic: Free 26/7 hog heads
- Replies: 1
- Views: 387
Free 26/7 hog heads
Located in Nashville. Pick up while you’re in town for the honky tonks or pay for shipping.
- Tue May 30, 2023 9:24 am
- Forum: Classifieds - Parts
- Topic: FS: home made stationary pulleys
- Replies: 0
- Views: 432
FS: home made stationary pulleys
I have two pulleys available. Only one image will upload of the smaller pulley. The one pictured needs the pulley to be realigned on the output shaft. I’m happy to email or text more pictures.
Make me an offer on one or both.
Make me an offer on one or both.
- Mon May 29, 2023 3:12 pm
- Forum: Classifieds - Parts
- Topic: FS Coupe sun visor.
- Replies: 3
- Views: 525
Re: FS Coupe sun visor.
Visor is sold.
It’s a ‘25 and early style.
It’s a ‘25 and early style.
- Sat May 27, 2023 12:54 pm
- Forum: Classifieds - Parts
- Topic: FS Coupe sun visor.
- Replies: 3
- Views: 525
FS Coupe sun visor.
$100 + shipping.
Pictures will be added Sunday.
Pictures will be added Sunday.
- Thu May 25, 2023 5:58 pm
- Forum: Classifieds - Parts
- Topic: FS… Windshields
- Replies: 1
- Views: 637
FS… Windshields
Make me an offer. Several windshield frames plus one headlamp cross bar.
- Sat May 13, 2023 10:45 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE - BULL DOG HAND PULL FROM THE DRIVERS SEAT CRANK STARTER
- Replies: 3
- Views: 1192
Re: FOR SALE - BULL DOG HAND PULL FROM THE DRIVERS SEAT CRANK STARTER
I’ll bite
Sent email
Sent email
- Sun Apr 09, 2023 3:31 pm
- Forum: Classifieds - Parts
- Topic: Offset Spindles
- Replies: 1
- Views: 644
Re: Offset Spindles
Hi there Bruce. I sent an email but it was rejected. I sent another via the forum email link icon.
- Sun Jan 22, 2023 9:34 am
- Forum: Classifieds - Parts
- Topic: Payment for parts
- Replies: 23
- Views: 3394
Re: Payment for parts
The IRS has delayed the issuance of the 1099-K's with the low $600 threshold until 2024; using 2023 as the consumer transition and educational period. https://www.taxpayeradvocate.irs.gov/news/nta-blog-heard-loud-and-clear-irs-postpones-implementation-of-600-form-1099-k-reporting-by-a-year/#:~:text=...
- Fri Jan 13, 2023 2:37 pm
- Forum: Classifieds - Parts
- Topic: U&J carburetor venturi and float
- Replies: 2
- Views: 752
Re: U&J carburetor venturi and float
I'm sending you an email Corey
- Sun Dec 25, 2022 11:36 am
- Forum: Classifieds - Parts
- Topic: Merry Christmas and Happy New Year to All
- Replies: 5
- Views: 839
Re: Merry Christmas and Happy New Year to All
Merry Christmas and Happy New Year everyone
- Thu Dec 01, 2022 7:30 pm
- Forum: Classifieds - Parts
- Topic: See it, want it, let’s talk !
- Replies: 10
- Views: 3030
Re: See it, want it, let’s talk !
I’m still speechless of how immature & shallow the admin’s are in banning a gentleman like Tim. Knowledgeable and a great contributor to the T hobby.
- Fri Nov 11, 2022 2:20 pm
- Forum: Classifieds - Parts
- Topic: Winfield Carburetor Choke Assembly (SOLD)
- Replies: 3
- Views: 557
Re: Winfield Carburetor Choke Assembly
Message sent.
- Sun Nov 06, 2022 8:47 pm
- Forum: General Discussion Forum
- Topic: What wheel is this?
- Replies: 3
- Views: 800
What wheel is this?
https://www.ebay.com/itm/225225434696?m ... media=COPY
I’ve never seen a wheel being crimped like this before. Curious of what we are looking at for anyone who knows.
I’ve never seen a wheel being crimped like this before. Curious of what we are looking at for anyone who knows.
- Fri Sep 30, 2022 3:56 pm
- Forum: General Discussion Forum
- Topic: Passing through Nashville to Hershey?
- Replies: 1
- Views: 577
Re: Passing through Nashville to Hershey?
Repost bump
- Thu Sep 29, 2022 11:11 am
- Forum: General Discussion Forum
- Topic: Passing through Nashville to Hershey?
- Replies: 1
- Views: 577
Passing through Nashville to Hershey?
If you're passing through Nashville to Hershey, please reach out to me. I'd like to get 4 accessory wheels up for delivery and some brought back down to me.
Even if you're passing through once, I'd like to hear from you. Thanks!
Even if you're passing through once, I'd like to hear from you. Thanks!
- Wed Sep 28, 2022 2:27 pm
- Forum: Classifieds - Parts
- Topic: Free axles
- Replies: 1
- Views: 715
Free axles
I just found this in my local area. Not Model A but wanted to share.
https://www.facebook.com/marketplace/it ... 129321998/
https://www.facebook.com/marketplace/it ... 129321998/
- Tue Jun 14, 2022 12:48 pm
- Forum: Classifieds - Parts
- Topic: WTB Model T Copper Head Gasket FOUND!
- Replies: 21
- Views: 3236
Re: WTB Model T Copper Head Gasket
Has anyone tried BestGasket and their custom department?
https://bestgasket.com/custom-head-gaskets/
https://bestgasket.com/custom-head-gaskets/
- Tue May 17, 2022 4:07 pm
- Forum: Classifieds - Parts
- Topic: For Sale - Stromberg Acorn Nuts
- Replies: 12
- Views: 2123
- Sat May 14, 2022 9:37 pm
- Forum: General Discussion Forum
- Topic: What perch is this?
- Replies: 8
- Views: 1216
What perch is this?
I picked these up at Luray confident they were the tall perches for a large drum axle. I believe those are straight up, not curved like these.
Who knows what I have and what they go to?
Who knows what I have and what they go to?
- Fri May 06, 2022 8:06 pm
- Forum: Classifieds - Parts
- Topic: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
- Replies: 5
- Views: 1241
Re: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
Airplane and race car made out of mailboxes
the creative mind knows NO LIMITS!!!
the creative mind knows NO LIMITS!!!
- Wed Apr 06, 2022 6:53 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS Complete 3 Port Olds Head Kit
- Replies: 6
- Views: 1812
Re: FS Complete 3 Port Olds Head Kit
Gorgeous
- Fri Apr 01, 2022 8:04 pm
- Forum: General Discussion Forum
- Topic: Young First Time Driver Tips?
- Replies: 32
- Views: 3277
Re: Young First Time Driver Tips?
Glad to have you here Josh. I'll message you separately as I'm here in West Meade/ Nashville.
- Thu Mar 24, 2022 2:06 pm
- Forum: General Discussion Forum
- Topic: Contact for Jay Burns
- Replies: 2
- Views: 775
Re: Contact for Jay Burns
Thanks Mr. Burns! I'll forward them over right now. Glad we could reconnect
- Tue Mar 22, 2022 7:13 pm
- Forum: General Discussion Forum
- Topic: Contact for Jay Burns
- Replies: 2
- Views: 775
Contact for Jay Burns
I attempted to send photo of my Rocky Mtn 6 speed shifter to Mr. Burns while at Chickasha. I checked my email later in the day and the email was rejected along with a simple test email. Does anyone have his contact info so I may share these pictures with him?
- Tue Mar 15, 2022 7:54 pm
- Forum: Classifieds - Parts
- Topic: WTB @ Chickasha plate covers
- Replies: 0
- Views: 682
WTB @ Chickasha plate covers
If it’s not too late to pack, I’m looking to buy at Chickasha the following for a Chevy OHV conversion:
JT 203 rocker arm cover (Thunderbolt)
JT 205 port blanking cover
JT 206 cylinder cover left
JT 207 chevy head sealing plate and exhaust adapter
JT 203 rocker arm cover (Thunderbolt)
JT 205 port blanking cover
JT 206 cylinder cover left
JT 207 chevy head sealing plate and exhaust adapter
- Mon Mar 14, 2022 6:09 pm
- Forum: Classifieds - Parts
- Topic: WTB: 5:1 steering shaft
- Replies: 2
- Views: 663
WTB: 5:1 steering shaft
Anyone have a new/like new shaft to bring to Chickasha?
- Sun Mar 13, 2022 9:21 am
- Forum: Classifieds - Parts
- Topic: LAST CALL CHICKASHA DELIVERY 10am CT
- Replies: 1
- Views: 666
LAST CALL CHICKASHA DELIVERY 10am CT
Hank Lee has some of the finest items that has ever come across this forum For any last-minute purchases for assisted delivery to Chickasha, I will be arriving to his place by 10 AM CT. Don’t miss out on this opportunity!!
- Thu Feb 10, 2022 2:17 pm
- Forum: Classifieds - Parts
- Topic: Chickasha transport
- Replies: 6
- Views: 1449
Re: Chickasha transport
Bump
All pick-ups for transport to Chickasha must be confirmed by March 12th.
All pick-ups for transport to Chickasha must be confirmed by March 12th.
- Sat Feb 05, 2022 5:45 pm
- Forum: Classifieds - Parts
- Topic: Chickasha transport
- Replies: 6
- Views: 1449
Re: Chickasha transport
Happy to help you out Gene.
If anyone else needs transport from Hank, feel free to reach out. 270 312 7703
If anyone else needs transport from Hank, feel free to reach out. 270 312 7703
- Thu Jan 20, 2022 5:47 pm
- Forum: Classifieds - Parts
- Topic: MODEL T TRAILER (FREE!!!)
- Replies: 5
- Views: 1648
Re: MODEL T TRAILER (FREE!!!)
Can it be delivered to Chickahsa!? Would love to have here in Nashville
- Sat Nov 27, 2021 10:17 pm
- Forum: Classifieds - Parts
- Topic: Due to the talk with the Doc, it looks like Bob's Antique Auto Parts will be liquidating
- Replies: 8
- Views: 3194
Re: Due to the talk with the Doc, it looks like Bob's Antique Auto Parts will be liquidating
God Bless you Bob! Thank you for service to the T hobby.
- Tue Oct 12, 2021 4:47 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Zenith S4BF Carb Choke Springs -New
- Replies: 5
- Views: 1290
Re: For Sale: Zenith S4BF Carb Choke Springs -New
Add one to my list. Email sent. Thanks Scott!
- Mon Aug 02, 2021 9:23 pm
- Forum: Classifieds - Parts
- Topic: WTB Zenith updraft intake Manifold.
- Replies: 3
- Views: 1326
Re: WTB Zenith updraft intake Manifold.
I may have the manifold your looking for.
- Mon Jul 12, 2021 10:21 am
- Forum: Classifieds - Parts
- Topic: FS - Winfield 4V - 1.12" Throat
- Replies: 3
- Views: 1325
Re: FS - Winfield 4V - 1.12" Throat
I’ll buy that
- Thu Jun 10, 2021 6:44 pm
- Forum: Classifieds - Parts
- Topic: SOLD! 1909/10 REAR AXLE ACCESSORY TRUSS ROD SUPPORT SETUP
- Replies: 5
- Views: 1854
Re: FOR SALE - 1909/10 REAR AXLE ACCESSORY TRUSS ROD SUPPORT SETUP
That's the e-brake. Not depicted as 'straight-forward' as the radius rods.
- Mon May 31, 2021 5:32 pm
- Forum: General Discussion Forum
- Topic: Model Ts and Memorial Day
- Replies: 8
- Views: 2039
Re: Model Ts and Memorial Day
Let’s not stop in front of me to see if this is actually a “practice bomb”
- Wed May 19, 2021 8:42 pm
- Forum: Classifieds - Parts
- Topic: WTB hitch that clamps to front axle to make wagon
- Replies: 3
- Views: 1315
Re: WTB hitch that clamps to front axle to make wagon
email sent Randy. Where are you located?
- Mon Apr 26, 2021 9:23 am
- Forum: Classifieds - Parts
- Topic: UPDATE all gone! Ruckstell fiber washers
- Replies: 36
- Views: 5000
Re: Ruckstell fiber washers
Tim, I've emailed (direct reply) several times this morning. Everytime I have received an 'undeliverable/address not found auto reply'.
If you have a spare 3.5" crank pulley pin, add that to my order before you ship. My pin threw yesterday
If you have a spare 3.5" crank pulley pin, add that to my order before you ship. My pin threw yesterday
- Mon Mar 22, 2021 3:08 pm
- Forum: Classifieds - Parts
- Topic: Intake Manifolds
- Replies: 3
- Views: 1329
Re: Intake Manifolds
Message left on your cell. I'll take the Winfield for sure.
- Mon Mar 15, 2021 8:13 pm
- Forum: Classifieds - Parts
- Topic: Staude wheels to Chickasha?
- Replies: 4
- Views: 1529
Re: Staude wheels to Chickasha?
Great question. I was initially asking about the rear wheels. I’m open to fronts if they are around.
- Mon Mar 15, 2021 10:41 am
- Forum: Classifieds - Parts
- Topic: Staude wheels to Chickasha?
- Replies: 4
- Views: 1529
Staude wheels to Chickasha?
Anyone have a set of these they'd like to unload at Chickasha? Shoot me a message if so.
- Sun Mar 14, 2021 3:41 pm
- Forum: Classifieds - Parts
- Topic: Wire wheels going to Chickasha
- Replies: 1
- Views: 858
Re: Wire wheels going to Chickasha
You’ve an email from me
- Tue Mar 09, 2021 9:27 am
- Forum: General Discussion Forum
- Topic: Porcenlin liscense plate restoration
- Replies: 15
- Views: 2852
Re: Porcenlin liscense plate restoration
Shawn with Restroe-A-Tag (www.restoreatag.com) restored my '12 KY plate. He does prefer to leave the back to be untouched in case there was ever question of the plates authenticity. If he can do this, I'm sure he can get the patina you're looking for.
- Mon Mar 08, 2021 4:52 pm
- Forum: Classifieds - Parts
- Topic: WTB @ Chickasha... or anywhere
- Replies: 0
- Views: 857
WTB @ Chickasha... or anywhere
I'm looking forward in being back to Chickasha this year! I've an aux planetary trans (driveshaft; bolt onto the rear-end style) which I need a shifter for. Does anyone have a shifter they'll part with or a photo to share to help ID it? If all else fails, I'm sure fabricating one won't be too comple...
- Mon Mar 08, 2021 12:18 pm
- Forum: Classifieds - Parts
- Topic: WTB Frontenac SOHC top cover
- Replies: 18
- Views: 3967
Re: WTB Frontenac SOHC top cover
Tim is a perfect example that it's never too late to learn. Ask for forgiveness; not permission! lol
- Thu Feb 11, 2021 7:38 pm
- Forum: Classifieds - Parts
- Topic: AA Chassis on Facebook
- Replies: 0
- Views: 728
- Sat Feb 06, 2021 4:50 pm
- Forum: Classifieds - Parts
- Topic: Gray and Davis..Starter..Generator
- Replies: 4
- Views: 1350
Re: Gray and Davis..Starter..Generator
So... are you selling or asking for the "trinket parts"?
- Sat Jan 23, 2021 8:33 pm
- Forum: Classifieds - Parts
- Topic: Bauer Tilt Wheel Badges Now Available
- Replies: 20
- Views: 5377
Re: Bauer Tilt Wheel Badges Now Available
I emailed you this morning for one John. Hope you receive it.
- Mon Jan 11, 2021 2:03 pm
- Forum: Classifieds - Parts
- Topic: Sold : NOS Offset/ Self Steering Spindles, $350 Plus Shipping
- Replies: 5
- Views: 1642
Re: For Sale : NOS Offset/ Self Steering Spindles, $350 Plus Shipping
I'll take them Richard. Send them to NashVegas. Email sent.
- Thu Dec 17, 2020 9:08 am
- Forum: Classifieds - Parts
- Topic: WTB Zenith fuel nut and choke spring
- Replies: 7
- Views: 1672
Re: WTB Zenith fuel nut and choke spring
No word from Stan.
I've tried Ace, Grainger, McMaster Carr, Motion Industries, maybe another for the 1/4 fuel line nut with 1/2 anything in thread size. Y'all keep me in mind for when you're rummaging thru the junk box and find an oversized fuel nut
I've tried Ace, Grainger, McMaster Carr, Motion Industries, maybe another for the 1/4 fuel line nut with 1/2 anything in thread size. Y'all keep me in mind for when you're rummaging thru the junk box and find an oversized fuel nut
- Tue Dec 08, 2020 7:04 am
- Forum: Classifieds - Parts
- Topic: Lugs for sale.
- Replies: 1
- Views: 895
Re: Lugs for sale.
...bump...
- Fri Dec 04, 2020 9:55 pm
- Forum: Classifieds - Parts
- Topic: Lugs for sale.
- Replies: 1
- Views: 895
Lugs for sale.
13 total lugs for sale. Make offer on one or all. Thanks!
- Fri Dec 04, 2020 7:50 am
- Forum: Classifieds - Parts
- Topic: WTB Zenith fuel nut and choke spring
- Replies: 7
- Views: 1672
Re: WTB Zenith fuel nut and choke spring
Thank you Stan. Sending an email now to you
- Wed Dec 02, 2020 12:01 pm
- Forum: Classifieds - Parts
- Topic: WTB Zenith fuel nut and choke spring
- Replies: 7
- Views: 1672
WTB Zenith fuel nut and choke spring
Needing the fuel nut for a Zenith S4BF and choke torsion spring. Not sure where to go to buy these. Any pointer is appreciated.
- Wed Nov 25, 2020 10:43 am
- Forum: General Discussion Forum
- Topic: Happy Thanksgiving Everyone
- Replies: 4
- Views: 1180
Re: Happy Thanksgiving Everyone
Happy and healthy Thanksgiving to everyone!
- Wed Nov 25, 2020 10:39 am
- Forum: General Discussion Forum
- Topic: What is your preferred parts cleaner?
- Replies: 27
- Views: 3942
Re: What is your preferred parts cleaner?
There was a time when kerosene was cheap and plentiful. It works well for parts cleaning but now is pretty expensive. Nowadays gas or lacquer thinner works well and is cheap. BUT be careful! If your a smoker don’t smoke around it! None of that round here John. I don't want to be the next Cousin Edd...
- Wed Nov 25, 2020 8:04 am
- Forum: General Discussion Forum
- Topic: Auto painter in Central KY/TN needed
- Replies: 1
- Views: 780
Re: Auto painter in Central KY/TN needed
bump to top
- Tue Nov 24, 2020 8:25 pm
- Forum: General Discussion Forum
- Topic: Low Head High Head?
- Replies: 7
- Views: 1994
Re: Low Head High Head?
One is desirable (the low head), the other you donate keep in a jon boat as an anchor. The low head gives more compression... the amount, someone else with more expertise may be able to answer that. The noticeable difference is the water neck is taller. If you don't have much experience, the noticea...
- Tue Nov 24, 2020 1:04 pm
- Forum: General Discussion Forum
- Topic: What is your preferred parts cleaner?
- Replies: 27
- Views: 3942
Re: What is your preferred parts cleaner?
perry kete wrote: ↑Tue Nov 24, 2020 12:26 pmI use my younger brother he cleans sufficiently and he gets the grease off the car and him !What I'm looking for is a cleaner that'll will clean sufficiently
LOL
- Tue Nov 24, 2020 8:16 am
- Forum: General Discussion Forum
- Topic: What is your preferred parts cleaner?
- Replies: 27
- Views: 3942
What is your preferred parts cleaner?
Just getting a pulse on what the top parts cleaner is out there and where to purchase. I've been using Mineral Spirits and have no complaints. A parts solution from TSC has some great reviews. I'm not up to speed on what chemical makeup differences here are tho. :? What I'm looking for is a cleaner ...
- Mon Nov 23, 2020 11:59 am
- Forum: General Discussion Forum
- Topic: Auto painter in Central KY/TN needed
- Replies: 1
- Views: 780
Auto painter in Central KY/TN needed
I've a '72 Road Runner that I need to get painted. The two painters I've used in Elizabethtown KY are permanently finished due to health factors. The car is at my parents near Elizabethtown KY and I'm in Nashville TN. All body repair work has been completed. If anyone has a strong & personal recomme...
- Sat Nov 21, 2020 1:02 pm
- Forum: Classifieds - Parts
- Topic: WTB 30x3.5 flaps
- Replies: 3
- Views: 935
Re: WTB 30x3.5 flaps
Thanks Bob!
- Sat Nov 21, 2020 9:43 am
- Forum: Classifieds - Parts
- Topic: WTB 30x3.5 flaps
- Replies: 3
- Views: 935
WTB 30x3.5 flaps
Looking for two please.
- Fri Nov 20, 2020 4:43 pm
- Forum: Classifieds - Parts
- Topic: Model T Ford parts business will start Liquidation soon
- Replies: 6
- Views: 2276
Re: Model T Ford parts business will start Liquidation soon
We will miss all you, and the gang, immensely. God Bless and be healthy Bob.
- Fri Nov 13, 2020 3:09 pm
- Forum: Classifieds - Parts
- Topic: MODEL T PARTS
- Replies: 6
- Views: 2775
Re: MODEL T PARTS
The facebook "model t cars and parts for sale" has a large ruckstell for sale. Charleston WV.
- Wed Nov 11, 2020 10:03 am
- Forum: Classifieds - Parts
- Topic: Anyone have some used valves?
- Replies: 6
- Views: 1803
Re: Anyone have some used valves?
What size valve stem Mark?
- Thu Oct 29, 2020 11:48 am
- Forum: Classifieds - Parts
- Topic: For Sale: 1912 MOSCO accessory gas gauge - SOLD!!!
- Replies: 2
- Views: 1148
Re: For Sale: 1912 MOSCO accessory gas gauge
I can do that. Send it to Nashville Walt.
- Wed Oct 28, 2020 9:28 am
- Forum: General Discussion Forum
- Topic: Kokomo friction shock help
- Replies: 3
- Views: 1225
Re: Kokomo friction shock help
Huge help again to Dan! Thank you.
- Tue Oct 27, 2020 6:55 pm
- Forum: General Discussion Forum
- Topic: Kokomo friction shock help
- Replies: 3
- Views: 1225
Re: Kokomo friction shock help
I don't want to get buried! haha
- Tue Oct 27, 2020 11:28 am
- Forum: General Discussion Forum
- Topic: Kokomo friction shock help
- Replies: 3
- Views: 1225
Kokomo friction shock help
Who has some knowledge about these and how they are mounted? To state the obvious, It looks like I have two front and one rear.
These were soaked in EvapoRust for 24hrs. I didn’t take a before picture but impressive to say the least.
These were soaked in EvapoRust for 24hrs. I didn’t take a before picture but impressive to say the least.
- Sat Oct 24, 2020 6:34 pm
- Forum: Classifieds - Parts
- Topic: Off topic but FS
- Replies: 9
- Views: 2045
Re: Off topic but FS
235 is the half Length valve cover. I cannot speak to if the heads are the same.
- Thu Oct 08, 2020 10:43 am
- Forum: General Discussion Forum
- Topic: What did you find at Luray???
- Replies: 9
- Views: 3289
Re: What did you find at Luray???
I wish I would have made an offer and bought the C35 Rajo next to where Dennis was set up.
- Tue Oct 06, 2020 1:00 pm
- Forum: General Discussion Forum
- Topic: Rear frame extension....?
- Replies: 3
- Views: 1195
Rear frame extension....?
I picked these up from Dennis here at Luray. We’re curious of what exactly these are.
- Tue Oct 06, 2020 12:58 pm
- Forum: General Discussion Forum
- Topic: Luray, VA Mid-Atlantic Pre-War Swap Meet Pics
- Replies: 30
- Views: 5163
Re: Luray, VA Mid-Atlantic Pre-War Swap Meet Pics
If anyone here has a 30x3.5 clincher I need one more to get my set of steel Hayes back on the road
- Mon Sep 28, 2020 9:14 am
- Forum: Classifieds - Parts
- Topic: WTB 4 lug demountable T rims
- Replies: 2
- Views: 1013
Re: WTB 4 lug demountable T rims
To clarify, 30 x 3.5 clinchers are what I’m looking for.
- Sun Sep 27, 2020 9:29 am
- Forum: Classifieds - Parts
- Topic: WTB 4 lug demountable T rims
- Replies: 2
- Views: 1013
WTB 4 lug demountable T rims
I can pick up at Luray. I am needing four total. Good shape only. Thank you.
- Mon Sep 21, 2020 11:45 am
- Forum: Classifieds - Parts
- Topic: Aluminum updraft intake. Sold
- Replies: 4
- Views: 1214
Re: Aluminum updraft intake
Morning Mike. Please see my email.
- Fri Sep 18, 2020 3:12 pm
- Forum: Classifieds - Parts
- Topic: Weaver jack pat. 1914. Sold to bob
- Replies: 2
- Views: 1014
Re: Weaver jack pat. 1914
Email sent to you Mike.
- Wed Aug 12, 2020 9:02 pm
- Forum: Classifieds - Parts
- Topic: Staude conversion rear wheels
- Replies: 5
- Views: 2449
Re: Staude conversion rear wheels
Sent you an email.
- Tue Jul 14, 2020 7:27 am
- Forum: Classifieds - Parts
- Topic: aluminum intake manifold and carburator
- Replies: 7
- Views: 3376
Re: aluminum intake manifold and carburator
I’ll take the intake Gene. Sent you a text. Thanks!
- Thu Jun 25, 2020 12:08 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE - EARLY OVER THE AXLE WISHBONE PERCH NEW OLD STOCK
- Replies: 5
- Views: 2408
Re: FOR SALE - EARLY OVER THE AXLE WISHBONE PERCH NEW OLD STOCK
My mistake. This is one perch. I thought it was a pair. Still available.
- Wed Jun 24, 2020 10:30 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE - EARLY OVER THE AXLE WISHBONE PERCH NEW OLD STOCK
- Replies: 5
- Views: 2408
Re: FOR SALE - EARLY OVER THE AXLE WISHBONE PERCH NEW OLD STOCK
I’ll take it Jay. Thanks.
- Wed Jun 24, 2020 1:43 pm
- Forum: Classifieds - Parts
- Topic: pair of 1911-18 front spring perches
- Replies: 3
- Views: 1706
Re: pair of 1911-18 front spring perches
Can you upload a closer pic of the threads? The right perch looks as if the lower shank is smashed.