Search found 147 matches
- Mon Apr 15, 2024 6:16 pm
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Re: Roadster fender irons
I checked the 1920 parts book and found that the rear fender irons are the same from 1913 through 1920 and both the coupe and the roadster used the same iron. When I measured from the top of the front and rear fender irons I get the measurement of front 34 1/4 inch and rear 37 3/8 inch. from the flo...
- Mon Apr 15, 2024 4:03 pm
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Re: Roadster fender irons
Steve, I couldn't attach the drawing. From the body to the bend is 12 inch. and from the bend to the end where the fender mounts is 7 inch.
Craig
Craig
- Mon Apr 15, 2024 3:52 pm
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Re: Roadster fender irons
Steve, this is a drawn of my rear fender irons with the measurements. Hope you can read them Craig
- Mon Apr 15, 2024 11:49 am
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Re: Roadster fender irons
Are roadster and coupe rear fender irons the same?
- Sun Apr 14, 2024 6:43 pm
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Roadster fender irons
Looking at a 14 roadster sideways with no one in it, are the front and back fenders supposed to be level with each other or are the front fenders lower than the back ones? I am getting ready to mount the fenders on my car and I thought to measure the distance from the top of the fender irons to the ...
- Wed Mar 20, 2024 1:01 pm
- Forum: General Discussion Forum
- Topic: Windshield hinge machine screws
- Replies: 4
- Views: 351
Re: Windshield hinge machine screws
PM sent, Craig
- Tue Mar 19, 2024 10:18 pm
- Forum: General Discussion Forum
- Topic: Windshield hinge machine screws
- Replies: 4
- Views: 351
Windshield hinge machine screws
Can someone tell me what size and thread the round head machine screws are that attaches the windshield hinge to the windshield frame on a 1913/14 Model T Ford?
Thank you, Craig
Thank you, Craig
- Sat Mar 09, 2024 8:34 pm
- Forum: Classifieds - Parts
- Topic: FS: CARBIBE GENERATOR
- Replies: 3
- Views: 490
Re: FS: CARBIBE GENERATOR
email sent Craig
- Wed Mar 06, 2024 10:00 pm
- Forum: General Discussion Forum
- Topic: Looking for information on a 1914 Victor carbide generator
- Replies: 2
- Views: 255
Looking for information on a 1914 Victor carbide generator
You guys were great on giving me the information I needed on a Corcoran carbide generator for my 1914 Ford. Now I am asking about a Victor generator for a 1913/14 Ford. How do I tell if it is indeed a Victor or not? And what are the differences? Thank you. Craig
- Wed Feb 28, 2024 11:13 pm
- Forum: General Discussion Forum
- Topic: 1913/14 Corcoran genator
- Replies: 3
- Views: 421
Re: 1913/14 Corcoran genator
The subject line should say "1913/14 Corcoran generator" not "genator"
Craig
Craig
- Wed Feb 28, 2024 10:48 pm
- Forum: General Discussion Forum
- Topic: 1913/14 Corcoran genator
- Replies: 3
- Views: 421
1913/14 Corcoran genator
What distinguishes a 1913/14 Corcoran carbide generator from the others. Otherwise, how do I know if I am looking a Corcoran generator or some other brand of generator? Pictures would be helpful.
Thank you
Craig
Thank you
Craig
- Thu Feb 22, 2024 10:53 pm
- Forum: Classifieds - Parts
- Topic: For Sale: 1913/14 Cocoran Carbide Generator (SOLD)
- Replies: 6
- Views: 362
Re: For Sale: 1913/14 Cocoran Carbide Generator
e-mail sent.
Craig
Craig
- Thu Jan 25, 2024 2:25 pm
- Forum: General Discussion Forum
- Topic: Body weight
- Replies: 15
- Views: 810
Re: Body weight
Thank you everyone. What I need the weight for is I have my 14 roadster body ready to mount onto the frame. The body is completely restored with upholstery. i have removed the seat cushion and turtle deck and wood dash to make it lighter. I am 83 and can not do what I used to. I am trying to get a w...
- Wed Jan 24, 2024 11:18 pm
- Forum: General Discussion Forum
- Topic: Body weight
- Replies: 15
- Views: 810
Re: Body weight
I just noticed that I spelled Body wrong, my mistake. Craig
- Wed Jan 24, 2024 7:26 pm
- Forum: General Discussion Forum
- Topic: Body weight
- Replies: 15
- Views: 810
Body weight
Does anyone have an idea of the weight of a 1913/14 Model T roadster body? Just the body without the turtle deck or dash and unattached to the frame.
Thank you Craig
Thank you Craig
- Sun Jan 14, 2024 11:08 pm
- Forum: General Discussion Forum
- Topic: need measurements for the holes in the windshield channels for a 1914
- Replies: 3
- Views: 257
Re: need measurements for the holes in the windshield channels for a 1914
Thank you Dale, I will now drill my repro windshield and paint it before mounting, Craig
- Sun Jan 14, 2024 10:07 pm
- Forum: General Discussion Forum
- Topic: need measurements for the holes in the windshield channels for a 1914
- Replies: 3
- Views: 257
Re: need measurements for the holes in the windshield channels for a 1914
Does anyone out there have a 13 or 14 windshield frame that they could measure from the center of the bottom hole to the bottom of the frame and give me the measurement? Craig
- Thu Jan 11, 2024 7:30 pm
- Forum: General Discussion Forum
- Topic: need measurements for the holes in the windshield channels for a 1914
- Replies: 3
- Views: 257
need measurements for the holes in the windshield channels for a 1914
I need measurements for the holes in the windshield channels for a 1914 Ford roadster. I purchased a new windshield frame and it came without the holes drilled for the hinges. The pictured frame is not Ford, I don’t know what it is but it shows just what I am looking for. I need the measurement from...
- Sat Dec 30, 2023 5:59 pm
- Forum: General Discussion Forum
- Topic: Looking for information about 1913-14 roadster tops
- Replies: 10
- Views: 592
Re: Looking for information about 1913-14 roadster tops
Don;
Thank you for the information
Craig
Thank you for the information
Craig
- Fri Dec 29, 2023 2:34 pm
- Forum: General Discussion Forum
- Topic: Looking for information about 1913-14 roadster tops
- Replies: 10
- Views: 592
Re: Looking for information about 1913-14 roadster tops
Thank you for the information, that is what I was looking for. One more question; are the measurements you gave me for the distance above the sockets that the wood bow protrudes from socket measured from the inside (underside) or from the top of the wood bow? For an example: Front #1 bow protrudes f...
- Thu Dec 28, 2023 9:16 pm
- Forum: General Discussion Forum
- Topic: Looking for information about 1913-14 roadster tops
- Replies: 10
- Views: 592
Re: Looking for information about 1913-14 roadster tops
One more thing, are the 13/14 roadster top irons and bows the same as the 1915-22 roadsters
- Thu Dec 28, 2023 9:05 pm
- Forum: General Discussion Forum
- Topic: Looking for information about 1913-14 roadster tops
- Replies: 10
- Views: 592
Re: Looking for information about 1913-14 roadster tops
Thank you; There is a lot of information in the above post. What I am looking for is more in line with the attached link for a 1914 touring only for a roadster. I need the length of the top irons and how far the wood bows extend beyond the irons. Are the front irons and bows the same for both the to...
- Thu Dec 28, 2023 5:49 pm
- Forum: General Discussion Forum
- Topic: Engine Casting Mark VS Engine Serial Number
- Replies: 14
- Views: 816
Re: Engine Casting Mark VS Engine Serial Number
That "71" was scratched into the sand mold by hand after the pattern was drawn out. I retired as a molder/core maker from a foundry after almost 30 working. We used to scratch dates into pump molds before closing the mold up for pouring.
Craig
Craig
- Thu Dec 28, 2023 5:20 pm
- Forum: General Discussion Forum
- Topic: Looking for information about 1913-14 roadster tops
- Replies: 10
- Views: 592
Looking for information about 1913-14 roadster tops
I am looking for dimensions for a 1913-14 ford roadster top showing how far the top bows extend above the top irons for all 3 bows and the total length, etc. I looked on the Ford website and couldn’t find anything about roadster tops. I did find the information about 1911 and 1915-17 tops. I am hopi...
- Wed Dec 20, 2023 3:51 pm
- Forum: Classifieds - Parts
- Topic: WTB
- Replies: 17
- Views: 1283
Re: WTB
Looks like the flange on the fan hub is cracked.
- Tue Dec 12, 2023 9:59 pm
- Forum: Classifieds - Parts
- Topic: SOLD: Kingston Y 4 Ball Carburetor for 1913-14
- Replies: 1
- Views: 177
Re: For Sale: Kingston Y 4 Ball Carburetor for 1913-14
Sent e-mail
Craig
Craig
- Thu Dec 07, 2023 8:37 pm
- Forum: Classifieds - Parts
- Topic: WTB roadster rear fender irons
- Replies: 1
- Views: 337
WTB roadster rear fender irons
Wanted; rear fender irons for 1913 - 1920? roadster, had a pair but now they are lost so I need to replace them. contact me via e-mail.
Craig
Craig
- Sun Dec 03, 2023 10:46 pm
- Forum: General Discussion Forum
- Topic: Body mounting brakets
- Replies: 2
- Views: 322
Body mounting brakets
I have a question about the body mounting brackets on a 1914 and later roadster body. Do the rear brackets have round or square holes to mount them to the main sills? If square holes them the carriage bolts go from the underside of the body out through the brackets and the rear fender irons with the...
- Wed Nov 15, 2023 10:39 pm
- Forum: General Discussion Forum
- Topic: Looking for Pitman arm information
- Replies: 3
- Views: 318
Re: Looking for Pitman arm information
Looks like I have a 26/27 pitman arm on a 13/14 steering column, interesting.
thank you for your reply. Craig
thank you for your reply. Craig
- Tue Nov 14, 2023 10:25 pm
- Forum: General Discussion Forum
- Topic: Looking for Pitman arm information
- Replies: 3
- Views: 318
Looking for Pitman arm information
The pictures are of 2 pitman arms I have. The short on is a repro and a very good looking one at that. The long one came off my 1914 steering column. The short one is the same as the one I have on my 1915. I checked the parts books and the same part number is used from 13 through 26 and appears to b...
- Tue Nov 14, 2023 10:22 pm
- Forum: Classifieds - Parts
- Topic: Looking for pitman info
- Replies: 2
- Views: 219
Re: Looking for pitman info
Wrong forum, sorry
- Tue Nov 14, 2023 10:21 pm
- Forum: Classifieds - Parts
- Topic: Looking for pitman info
- Replies: 2
- Views: 219
Looking for pitman info
The pictures are of 2 pitman arms I have. The short on is a repro and a very good looking one at that. The long one came off my 1914 steering column. The short one is the same as the one I have on my 1915. I checked the parts books and the same part number is used from 13 through 26 and appears to b...
- Mon Oct 30, 2023 1:40 pm
- Forum: General Discussion Forum
- Topic: What oil do I use?
- Replies: 38
- Views: 1596
What oil do I use?
The last time I had this problem was back in the early 1960's. At the time the oil of choice was 30 wt. non detergent. with the variety of oil on the market now, what is the oil of choice? Should I use synthetic, detergent or non detergent and what wt. should I use? It used to be 30 wt. but what is ...
- Thu Oct 26, 2023 11:50 am
- Forum: General Discussion Forum
- Topic: Need firewall drawing information
- Replies: 2
- Views: 206
Re: Need firewall drawing information
Thank you Tbird for the information, it is just what I was looking for. I will save the link for anything else I may need in the future. Craig
- Wed Oct 25, 2023 9:02 pm
- Forum: General Discussion Forum
- Topic: Need firewall drawing information
- Replies: 2
- Views: 206
Need firewall drawing information
I am restoring a 1914 Ford roadster and am looking for a drawing that shows and gives the dimensions of the steering column slot. I did find a print of the early dash but the writing was so small and blurry that I can't read it. Anyone have a copy of the factory blueprint? Thank you
Craig
Craig
- Thu Oct 19, 2023 12:41 pm
- Forum: Classifieds - Parts
- Topic: For sale early motor mount SOLD
- Replies: 1
- Views: 168
Re: For sale early motor mount
e-mail sent
Craig
Craig
- Tue Oct 17, 2023 10:36 pm
- Forum: Classifieds - Parts
- Topic: Wanted cast iron brake shoe
- Replies: 0
- Views: 124
Wanted cast iron brake shoe
Wanted; one (1) cast iron brake shoe in good usable condition or NOS for small drum rear end.
Thank you
Craig E. Luton
Thank you
Craig E. Luton
- Tue Oct 17, 2023 11:51 am
- Forum: Classifieds - Parts
- Topic: CASTiRON BRAKE SHOES
- Replies: 5
- Views: 343
Re: CASTiRON BRAKE SHOES
Mark; that is correct, that is why I asked
Craig
Craig
- Mon Oct 16, 2023 11:50 pm
- Forum: Classifieds - Parts
- Topic: CASTiRON BRAKE SHOES
- Replies: 5
- Views: 343
Re: CASTiRON BRAKE SHOES
Are you slaying that they are free and I pay postage. If so, I will take them
Craig
Craig
- Sun Sep 17, 2023 10:33 pm
- Forum: General Discussion Forum
- Topic: Looking for supplier of accessory brake shoe lining.
- Replies: 4
- Views: 287
Re: Looking for supplier of accessory brake shoe lining.
Thank you everyone, I just ordered the brake lining for my car.
Craig
Craig
- Sun Sep 17, 2023 7:51 pm
- Forum: General Discussion Forum
- Topic: Looking for supplier of accessory brake shoe lining.
- Replies: 4
- Views: 287
Looking for supplier of accessory brake shoe lining.
Back in the 60’s I bought a pair of accessory lined brake shoes to replace the cast iron ford ones. I recently purchased a pair of brake shoes like the ones I bought in the 60’s. Where do I fine brake lining for them? They are 1” wide and held on with split rivets. Thank you in advance for the infor...
- Thu Jun 22, 2023 1:30 pm
- Forum: General Discussion Forum
- Topic: looking for information about front fender irons
- Replies: 3
- Views: 423
Re: looking for information about front fender irons
Thank you for your reply. The way I interpret it is that I should use the 3 1/2" reach fender bracket for the 13/14 year era. Is that correct? Craig
- Wed Jun 21, 2023 11:17 pm
- Forum: General Discussion Forum
- Topic: looking for information about front fender irons
- Replies: 3
- Views: 423
looking for information about front fender irons
I have a question about 1913-14 fender irons. I read somewhere that the early cars used shorter fender irons. I don’t know where I read it but please look at the attached photos. The pictures show the front fender irons that fit into the fender mounting bracket on the fenders. Note that on some the ...
- Sun Jun 18, 2023 12:29 pm
- Forum: Classifieds - Parts
- Topic: FS 13-14 6 Screw Coils (SOLD pending)
- Replies: 2
- Views: 462
Re: FS 13-14 6 Screw Coils
Are these good usable coils or do they need rebuilding? If so, are they rebuildable? Craig
- Wed Jun 14, 2023 11:38 pm
- Forum: Classifieds - Parts
- Topic: 13 steering column for sale
- Replies: 4
- Views: 724
Re: 13 steering column for sale
Doesn.t 12 have the offset hole in the base where it attaches to the dash? Craig
- Tue Jun 06, 2023 10:17 pm
- Forum: General Discussion Forum
- Topic: need information on rebuilding Ford coils
- Replies: 20
- Views: 1730
Re: need information on rebuilding Ford coils
Sorry I didn’t get back sooner but my computer was down. I borrowed my son-in-law’s digital ohm meter and got the following readings. 13.4 3.54 2.37 3.66 3.42 3.44 3.53 and 3.59 using the 20K scale. On all the other 12 coils I didn’t get any readings at all. After reading what everyone said and stud...
- Tue May 30, 2023 9:25 pm
- Forum: General Discussion Forum
- Topic: need information on rebuilding Ford coils
- Replies: 20
- Views: 1730
Re: need information on rebuilding Ford coils
Thank you everyone, I am going to borrow a digital meter to check my coils and will get back to this later. I did find the magazine Dennis mentioned and am going to do some reading. Another thing, being that my coils are either brass or cooper top coils my coils are probably KW coils and not Ford co...
- Tue May 30, 2023 3:08 pm
- Forum: Classifieds - Parts
- Topic: Wanted 1913 Touring top iron
- Replies: 16
- Views: 1416
Re: Wanted 1913 Touring top iron
What is the length of the front top socket for the 13/14 t's? I purchased a set of top sockets for my 14 Roadster quite some time ago and the front socket measures 20" long. Thank you Craig
- Mon May 29, 2023 11:00 pm
- Forum: General Discussion Forum
- Topic: Looking for frame information
- Replies: 2
- Views: 381
Re: Looking for frame information
Thank you, that is what I was looking for.
Craig
Craig
- Mon May 29, 2023 8:46 pm
- Forum: General Discussion Forum
- Topic: Looking for frame information
- Replies: 2
- Views: 381
Looking for frame information
Does anyone know of a chart showing the differences between frames from 09 through 27? Showing number of holes and location both square and round for each year. The chart I am thinking of showed what year/years each hole configuration was used.
Thank you
Craig
Thank you
Craig
- Mon May 29, 2023 12:09 am
- Forum: General Discussion Forum
- Topic: need information on rebuilding Ford coils
- Replies: 20
- Views: 1730
need information on rebuilding Ford coils
I am working on installing new condensers I purchased from Langs. I am working on 4 screw brass top coils, 6 screw brass top coils and 4 screw copper top coils. Look at the attached diagram and you will see that I have recorded the ohms taken from point A to point B along with my readings recorded o...
- Tue May 02, 2023 11:56 pm
- Forum: Classifieds - Parts
- Topic: Various parts. 26-27 fenders, DB front axle, etc
- Replies: 2
- Views: 760
Re: Various parts. 26-27 fenders, DB front axle, etc
sent an e-mail 5/02/2023
Craig
Craig
- Tue Apr 04, 2023 12:33 pm
- Forum: Classifieds - Parts
- Topic: Wanted Differential case
- Replies: 5
- Views: 733
Re: Wanted Differential case
Back to top.
- Mon Apr 03, 2023 9:37 pm
- Forum: Classifieds - Parts
- Topic: Wanted Differential case
- Replies: 5
- Views: 733
Wanted Differential case
Wanted: 1914-25? differential case; left side, the side that the ring gear bolts to; part number 2512. Looking for a very good one or a NOS one. Would prefer a NOS.
thank you
Craig E. Luton
thank you
Craig E. Luton
- Tue Mar 07, 2023 9:25 pm
- Forum: General Discussion Forum
- Topic: 1913/14 rear end backing plates
- Replies: 1
- Views: 362
1913/14 rear end backing plates
Does anyone know what material the rear end backing plates were made of in 1913 and 14?
Thank you
Craig
Thank you
Craig
- Fri Mar 03, 2023 10:52 pm
- Forum: General Discussion Forum
- Topic: Is this a scam?
- Replies: 9
- Views: 1377
Re: Is this a scam?
Bull sent me pictures of what he thought was a 14 rear end. I told him that it was not one so he sent me other pictures. He never did answer my questions. He is a SCAM person, stay away. I did delete my email address, never again.
Craig
Craig
- Fri Mar 03, 2023 7:45 pm
- Forum: General Discussion Forum
- Topic: 1914 backing plate material
- Replies: 4
- Views: 566
1914 backing plate material
Does anyone know what material the backing plates were made from? I heard they were made from malleable iron. One of the backing plates on my rear end is bent and cracked, I don't remember being able to bend malleable iron that much.
Thank you.
Craig
Thank you.
Craig
- Fri Mar 03, 2023 12:03 pm
- Forum: General Discussion Forum
- Topic: Is this a scam?
- Replies: 9
- Views: 1377
Re: Is this a scam?
Thank you, Now how do I get rid of my email address?
- Thu Mar 02, 2023 8:24 pm
- Forum: General Discussion Forum
- Topic: Is this a scam?
- Replies: 9
- Views: 1377
Re: Is this a scam?
I had advertised for 1913/14 rear end halves and he answered that he had some if I was interested. He didn't send any attachments so I have not opened anything from him. I did a search for him on the want ad forum and didn't find anything.
Craig
Craig
- Thu Mar 02, 2023 12:13 pm
- Forum: General Discussion Forum
- Topic: Is this a scam?
- Replies: 9
- Views: 1377
Is this a scam?
Has anyone dealt with someone with a email handle of "Pure Bull"? Wondering if it is legit or not.
Thank you
Craig
Thank you
Craig
- Sun Feb 26, 2023 9:30 pm
- Forum: Classifieds - Parts
- Topic: 1915 Horn F/S
- Replies: 6
- Views: 947
Re: 1915 Horn F/S
I will purchase the horn. Please give me your mailing address and I will get a check off to you. Craigandjoan@gmail.com
- Sun Feb 26, 2023 12:29 pm
- Forum: Classifieds - Parts
- Topic: 1915 Horn F/S
- Replies: 6
- Views: 947
Re: 1915 Horn F/S
Who is the maker of the horn (what brand)?
Craig
Craig
- Thu Feb 23, 2023 10:19 pm
- Forum: General Discussion Forum
- Topic: 13 - 15 bulb horn
- Replies: 6
- Views: 971
13 - 15 bulb horn
I am told that there is a difference between the 1913, 1914 and 15 bulb horns. Can anyone explain to me just what that difference is? I do know that there is different mounting brackets used on the bulb horns of that era (the cast bracket that bolts the horn to the wood dash); some are oval and othe...
- Mon Feb 06, 2023 6:28 pm
- Forum: Classifieds - Parts
- Topic: Wanted: 1913/14 rear end halves
- Replies: 6
- Views: 1033
Re: Wanted: 1913/14 rear end halves
Thank you everyone. I have just purchased a pair of 13-14 rear end halves so am not in need anymore.
Craig
Craig
- Sun Feb 05, 2023 11:54 pm
- Forum: Classifieds - Parts
- Topic: Wanted: 1913/14 rear end halves
- Replies: 6
- Views: 1033
Re: Wanted: 1913/14 rear end halves
E-mail sent 2/5/2023 @ 10:00 PM
Craig
Craig
- Sun Feb 05, 2023 7:45 pm
- Forum: Classifieds - Parts
- Topic: Wanted: 1913/14 rear end halves
- Replies: 6
- Views: 1033
Wanted: 1913/14 rear end halves
Wanted 1913-14 rear end halves in good usable condition. Need 1 or a pair.
Craig E. Luton
Craig E. Luton
- Tue Jan 24, 2023 3:25 pm
- Forum: General Discussion Forum
- Topic: Rear axle bearings
- Replies: 11
- Views: 1062
Rear axle bearings
Can anyone give me the dia. of the roller in the rear axle roller bearings when they were new?
Thank you in advance Craig
Thank you in advance Craig
- Wed Dec 21, 2022 3:09 pm
- Forum: General Discussion Forum
- Topic: Looking for John F. Regan
- Replies: 9
- Views: 1395
Re: Looking for John F. Regan
Thank you everyone. I have contacted him and we are talking now.
Merry Christmas everyone
Craig
Merry Christmas everyone
Craig
- Wed Dec 21, 2022 12:01 am
- Forum: General Discussion Forum
- Topic: Looking for John F. Regan
- Replies: 9
- Views: 1395
Re: Looking for John F. Regan
Thank you, I just sent an email to that address.
Craig
Craig
- Tue Dec 20, 2022 10:17 pm
- Forum: General Discussion Forum
- Topic: Looking for John F. Regan
- Replies: 9
- Views: 1395
Looking for John F. Regan
Does any out there know how to contact John F. Regan. I would like to talk to him and get some information about a 1914 Ford dash.
Thank you, Craig E. Luton
Thank you, Craig E. Luton
- Thu Dec 15, 2022 10:11 pm
- Forum: Classifieds - Parts
- Topic: FS Single Twist Nonpareil Brass Horn SOLD
- Replies: 9
- Views: 1356
Re: FS Single Twist Nonpareil Brass Horn
e-mail sent....Craig
- Sun Dec 11, 2022 5:49 pm
- Forum: Classifieds - Parts
- Topic: For Sale 1915 1916 hood
- Replies: 3
- Views: 783
Re: For Sale 1915 1916 hood
steel hood is 1916,not 15. 1915 hood is aluminum.
- Thu Dec 08, 2022 9:54 pm
- Forum: General Discussion Forum
- Topic: 1914 rear end leaks
- Replies: 17
- Views: 1951
Re: 1914 rear end leaks
Thank you again everyone for the good information.
Craig
Craig
- Wed Dec 07, 2022 1:21 pm
- Forum: General Discussion Forum
- Topic: 1914 rear end leaks
- Replies: 17
- Views: 1951
Re: 1914 rear end leaks
Thank you everyone for your replies. Jerry, what sealant did you use?
Craig
Craig
- Mon Dec 05, 2022 7:43 pm
- Forum: General Discussion Forum
- Topic: 1914 rear end leaks
- Replies: 17
- Views: 1951
1914 rear end leaks
I am in the process of rebuilding a 1914 Model T Ford rear end. I have found that one side leaks at the rivets.
What is the best or easiest way to repair/fix this problem? Would J P weld around the rivets on the inside work?
Thank you, Craig,
What is the best or easiest way to repair/fix this problem? Would J P weld around the rivets on the inside work?
Thank you, Craig,
- Sun Oct 16, 2022 10:14 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Thinning Out My Collection !
- Replies: 28
- Views: 4429
Re: For Sale: Thinning Out My Collection !
Sent you an e-mail.
Craig
Craig
- Fri Sep 23, 2022 2:40 pm
- Forum: Classifieds - Parts
- Topic: FS SCANDINAVIA BAND LININGS NOS
- Replies: 3
- Views: 618
Re: FS SCANDINAVIA BAND LININGS NOS
sent you an e-mail. Craig
- Fri Aug 19, 2022 9:33 pm
- Forum: General Discussion Forum
- Topic: Tie rod question
- Replies: 3
- Views: 648
Tie rod question
What year did Ford change the tie rod from the ball being attached to the tie rod itself to the ball being attached to the threaded adjuster that screws onto the end of the tie rod? The parts book lists the same part number form 1909 all the way through to 1927.
Thank you; Craig
Thank you; Craig
- Tue Aug 16, 2022 11:00 pm
- Forum: Classifieds - Parts
- Topic: Early DS Pinion Races. NOS
- Replies: 5
- Views: 1025
Re: Early DS Pinion Races. NOS
Dan; Did you receive my e-mail? My computer isn't working wright so I don 'know if you answered. Craig
- Mon Aug 15, 2022 11:01 pm
- Forum: Classifieds - Parts
- Topic: Early DS Pinion Races. NOS
- Replies: 5
- Views: 1025
Re: Early DS Pinion Races. NOS
e-mail sent 8/15/2022
Craig
Craig
- Sun Jul 31, 2022 2:17 pm
- Forum: Classifieds - Parts
- Topic: WANTED 1915 ROADSTER DOOR
- Replies: 4
- Views: 765
Re: WANTED 1915 ROADSTER DOOR
Touring front doors and Roadster are the same
- Sun Jul 24, 2022 12:17 pm
- Forum: General Discussion Forum
- Topic: Looking for drag link information.
- Replies: 9
- Views: 1430
Re: Looking for drag link information.
What year did forging both ends start? Craig
- Sat Jul 23, 2022 3:09 pm
- Forum: General Discussion Forum
- Topic: Looking for drag link information.
- Replies: 9
- Views: 1430
Re: Looking for drag link information.
I have a drag link here at the house that is forged on both ends. Craig
- Fri Jul 22, 2022 8:33 pm
- Forum: General Discussion Forum
- Topic: Looking for drag link information.
- Replies: 9
- Views: 1430
Looking for drag link information.
What are the differences in Model T drag links? I understand that some have riveted ends while others are forged. What years used what links?
Craig
Craig
- Thu Jul 21, 2022 10:39 am
- Forum: Classifieds - Parts
- Topic: WANTED; DB spindle with left hand threads.
- Replies: 10
- Views: 1504
Re: WANTED; DB spindle with left hand threads.
Kin; I sent you an e-mail. Craig
- Wed Jul 20, 2022 8:29 pm
- Forum: General Discussion Forum
- Topic: Question about front wheel bearings
- Replies: 10
- Views: 1408
Question about front wheel bearings
I am restoring a 1914 Ford and wondering if I can install Timken roller bearings into the front hubs or do I need to use ball bearings. If I go with Temkin's, what problems will I run into?
Thank you
Craig
Thank you
Craig
- Tue Jul 19, 2022 8:52 pm
- Forum: Classifieds - Parts
- Topic: WANTED; DB spindle with left hand threads.
- Replies: 10
- Views: 1504
WANTED; DB spindle with left hand threads.
WANTED; DB spindle with left hand threads. Will buy a pair if I have to. I was cleaning my spindles when I noticed that the body on one was dented in on one side then I noticed that the boss that the spindle arm fits into has a large crack between the boss and spindle body. I don’t want one that I h...
- Sun Jul 10, 2022 11:06 am
- Forum: Classifieds - Parts
- Topic: WTB: 25-30ish Essex frame or something similar for a 3 spring dry lakes car.
- Replies: 2
- Views: 791
- Tue Jun 21, 2022 11:27 am
- Forum: Classifieds - Parts
- Topic: FOR SALE - RUBES SINGLE TWIST BRASS HORN
- Replies: 1
- Views: 684
Re: FOR SALE - RUBES SINGLE TWIST BRASS HORN
email sent. Craig
- Tue Jun 14, 2022 11:52 pm
- Forum: Classifieds - Parts
- Topic: Aluminum hood and dash panel Hood SOLD
- Replies: 6
- Views: 1367
Re: Aluminum hood
Thank you
Craig
Craig
- Tue Jun 14, 2022 11:27 pm
- Forum: Classifieds - Parts
- Topic: Aluminum hood and dash panel Hood SOLD
- Replies: 6
- Views: 1367
Re: Aluminum hood
Melba;
I just now sent another e-mail to you, Please answer my question in e-mail
Craig
I just now sent another e-mail to you, Please answer my question in e-mail
Craig
- Tue Jun 14, 2022 11:48 am
- Forum: Classifieds - Parts
- Topic: Aluminum hood and dash panel Hood SOLD
- Replies: 6
- Views: 1367
Re: Aluminum hood
I sent you an e-mail on June 12, did you get it?
Craig E. Luton
Craig E. Luton
- Wed Jun 08, 2022 11:32 pm
- Forum: General Discussion Forum
- Topic: 1913-14 Head
- Replies: 3
- Views: 895
1913-14 Head
What physical characteristics should I look for in a 1913-14 head? Thank you, Craig
- Mon May 23, 2022 6:17 pm
- Forum: Classifieds - Parts
- Topic: FS—-> Brass sediment bulb
- Replies: 4
- Views: 1030
Re: FS—-> Brass sediment bulb
If still available I am interested. Craig
- Sun May 22, 2022 1:38 pm
- Forum: General Discussion Forum
- Topic: Starting crank bushing in front of pan removal
- Replies: 18
- Views: 2010
Re: Starting crank bushing in front of pan removal
I wonder if an "oil-lite" bushing would be strong enough for this application. Craig
- Thu May 19, 2022 9:58 pm
- Forum: General Discussion Forum
- Topic: Starting crank bushing in front of pan removal
- Replies: 18
- Views: 2010
Re: Starting crank bushing in front of pan removal
Thank you everyone. The pan is off the engine so that makes it easer to get to. Craig
- Thu May 19, 2022 7:24 pm
- Forum: General Discussion Forum
- Topic: Starting crank bushing in front of pan removal
- Replies: 18
- Views: 2010
Starting crank bushing in front of pan removal
I need to replace the bushing at the front of the oil pan that the starting crank goes through. What is the best and easiest way to remove the old bushing? The bushing is probably frozen into the pan.
Thank you in advance, Craig
Thank you in advance, Craig
- Wed Apr 20, 2022 9:58 pm
- Forum: General Discussion Forum
- Topic: I-Timer and ECCT with Advanced Features Software
- Replies: 6
- Views: 1453
I-Timer and ECCT with Advanced Features Software
It has been about 50 years since I worked on a “T” engine and now am building another one. What can anyone tell me about the “I-Timer” and their “ECCT with Advanced Features Software”. About 900.00 is a lot of money to put out for something I don’t really need and can do without. Thank you for your ...
- Mon Mar 07, 2022 3:00 pm
- Forum: Classifieds - Parts
- Topic: Forged end radius rods for sale. Sold
- Replies: 3
- Views: 958
Re: Forged end radius rods for sale
e-mail sent
Craig
Craig
- Mon Mar 07, 2022 2:25 pm
- Forum: Classifieds - Parts
- Topic: Forged end radius rods for sale. Sold
- Replies: 3
- Views: 958
Re: Forged end radius rods for sale
How are the threads?
Craig
Craig