MTFCA Forum

I just finished a valve job on my T, I needed to put the .030 oversized valve stemmed valves in and didn't want to remove the engine. I had this Jig made at local machine shop to do the drilling and reaming, it rest down in the block in the valve cavity, it is made to fit snug in the block shoulder ...

Thanks everyone, found correct bracket

This is Sold

The horn on my T died, I bought a Sparton #9 on ebay but the bolts on the cover are farther apart than the old one and don't fit the bracket, my bracket the holes are 2 inches apart,the new horn they are 2 1/2 inches apart anyone know where I can get a bracket to fit this horn?

shipping is with USPS, $21.90, total comes to $96.21,glad to hear you have some warm time during the day certainly don't get any here in upstate NY, my address is

John Markham
4947 Highmarket Rd
Constableville,NY 13325

send me your address and I will get a shipping cost so you will know total

It should, you use two of the screws that hold the two halves together, I think I have a bracket that will fit it, I will throw in if you want it

yes it is!

For Sale: older Sparton 6 volt motor horn, works fine $75.00 plus shipping

Send me pictures of parts, I may be interested in the whole lot I live near you

Has anyone ever tried to mount a new style wishbone on old style spring perch? I have old style and there is 3/4 inch of threaded shank below the axel, would like to not change them if I could

I'm in search of front wishbone for my 1923 pie wagon, hopefully in New England area to save on shipping

A while back I bought the 14 mm plug adapters but Lange don't tell you what plug you should use anyone using a 14 mm plug if so what make and number

Just seen in the paper Bill Randall owner and operator of the Rome Horn Shop in Rome NY passed away, I talked to his wife about three weeks ago, she said he was not doing well, I talked to him last fall at the Whampsville Show, he was struggling back then, was a good guy

Bills health has for ed him to retire

Any other repairman?

Does anyone know if Larry Rose at Moonshine County Horns is still in business ? He has not answered my email and I called the number on his card and get a recording the number is not available

I had two small cracks one in each windshield,I called Langs they don't handle glass they said have it cut at a local glass Co. So I did installed them both and they car has sat since not even started,went out today and lower window developed a crack just sitting there, must be a place that sells th...

Been a lot of threads about oil,what about gas,should we be running non ethanol or 10% ethanol? And what about lead additive, I have a older Ford tractor that tractor people tell me I have to add lead additive, should we also do it in the T?

I figured it out when I was using a test lead and closing the circuit I only had the button removed wires were still hooked to back section of switch I removed wires totally from switch and touched them together and it works great need new switch

I have been having horn problems for two years it has low rpm,s and sometimes didn't work at all,two years ago sent it for testing and fixing got it back same problem last fall sent it to what was supposed to be the best horn shop around got it back during winter took it into the shop and tried it d...

The engine had a total rebuild about 3000 miles ago

I have a five quart container of 10-30 conventional oil not blended is this safe to put in the T