Search found 972 matches

by RGould1910
Wed Mar 27, 2024 11:47 pm
Forum: General Discussion Forum
Topic: New u joints
Replies: 2
Views: 226

New u joints

How good are the new u joints offerd by the parts suppliers?
by RGould1910
Fri Mar 22, 2024 10:18 pm
Forum: General Discussion Forum
Topic: Question about axle shaft length 1912 Runabout
Replies: 11
Views: 345

Re: Question about axle shaft length 1912 Runabout

What I see in the photos wouldnt bother me.
by RGould1910
Fri Mar 22, 2024 3:32 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in March?
Replies: 33
Views: 1919

Re: What have you done to your Model T in March?

Cleaned and mounted the Fairbanks screw press I recently purchased on a bench I made for it. I need help making the fixtures that hold the centers if anyone has photos, dimensions etc.

20240322_122002.jpg
by RGould1910
Mon Mar 18, 2024 5:56 pm
Forum: General Discussion Forum
Topic: Prus head is on and TESTED.
Replies: 30
Views: 2066

Re: Prus head is on and TESTED.

20191108_152424.jpg
20191109_085552.jpg
Speaking of pistons hitting the head, I had that problem fitting .080" OS pistons to a Ricardo head. Rather than machine the head, I turned down the top edges of the pistons. Solved the problem.
by RGould1910
Sun Mar 17, 2024 7:31 pm
Forum: Classifieds - Parts
Topic: WTB: 1912 Torpedo tool box. 28x11x11
Replies: 15
Views: 669

Re: WTB: 1912 Torpedo tool box. 28x11x11

Michael. I have a tool box I purchased many years ago for a 1912 roadster that never materialized It may be larger than the dimensions you were given. Id have to check. From memory its in resl good condition. Shipping from California would be expensive though. If interested I'll pull it out of my at...
by RGould1910
Sat Mar 02, 2024 5:07 pm
Forum: Classifieds - Parts
Topic: WTB K R Wilson transmission fixture
Replies: 0
Views: 279

WTB K R Wilson transmission fixture

I have a good set of reamers but interested in the fixture
Here's photos of what I need .
20231229_165718.jpg
20231229_165708.jpg
by RGould1910
Fri Mar 01, 2024 12:33 pm
Forum: General Discussion Forum
Topic: Rocky mtns and roughed up drums.
Replies: 19
Views: 1125

Re: Rocky mtns and roughed up drums.

Rough surfaces will tear up lining before the metal surface smooths out. Think about transmission drums.
I've chewed up transmission linings by not filing and sanding smooth after turning on a lathe. I would get the brake drum surfaces as smooth as I could.
by RGould1910
Fri Mar 01, 2024 12:21 pm
Forum: General Discussion Forum
Topic: Need help re broken piece
Replies: 18
Views: 1108

Re: Need help re broken piece

Thanks Steve, it ruined my day!
by RGould1910
Fri Mar 01, 2024 11:40 am
Forum: General Discussion Forum
Topic: Need help re broken piece
Replies: 18
Views: 1108

Need help re broken piece

I accidentally dropped my KR Wison transmission jig and broke it. Looking for someone to expertly repair it. Any suggestions?
20240226_143131.jpg
20240226_143138.jpg
by RGould1910
Thu Feb 29, 2024 9:17 am
Forum: General Discussion Forum
Topic: Vendor valves undersized, proper clearance?
Replies: 5
Views: 394

Re: Vendor valves undersized, proper clearance?

As you know Ford specs allow up to 8 thou clearance. That seems excessive but I've not had problems at 5 thou clearance. When I reamed valve guides on my 10, I cut them for 1. 5 thou clearance and had sticky valves. I'm sure I was passing oil thru newly installed rings which had not seated, but when...
by RGould1910
Wed Feb 21, 2024 9:59 am
Forum: Classifieds - Parts
Topic: For Sale 1909 Timer
Replies: 3
Views: 522

Re: For Sale 1909 Timer

Details tells me it's an original
by RGould1910
Tue Feb 20, 2024 11:15 pm
Forum: General Discussion Forum
Topic: Polishing up spray painted T?
Replies: 14
Views: 841

Re: Polishing up spray painted T?

If the paint was applied thick enuf you can color sand with 1500 to 2000 grit or higher then buff it just as you would a single stage automotive paint. Only issue I see is whether the rattle can paint you used is touch enuf for the sanding and buffing. It probably is. Try it on an inconspicuous spot...
by RGould1910
Tue Feb 20, 2024 7:48 pm
Forum: General Discussion Forum
Topic: Convert the Ruckstell housing
Replies: 6
Views: 563

Re: Convert the Ruckstell housing

Dan's method is definitely better than attempting to bore out the tube remnant like I did. Alignment of the backing plate is critical. John's suggestion of putting everything together before riveting is good advice.
by RGould1910
Tue Feb 20, 2024 4:10 pm
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1289

Re: White gray smooth tires, clincher rims

Makes sense
by RGould1910
Tue Feb 20, 2024 12:56 pm
Forum: Classifieds - Parts
Topic: White gray smooth tires, clincher rims
Replies: 11
Views: 1289

Re: White gray smooth tires, clincher rims

Yeah, I got scammed and the guys were able to somehow copy my on line bank statement to "proove" they overpaid me. I called my bank and no such deposit existed. Since they got into my bank account and computer it took a week to change all financial accounts and all passwords etc. From now on I don't...
by RGould1910
Tue Feb 20, 2024 11:00 am
Forum: General Discussion Forum
Topic: What Have You Done to Your Model T in February?
Replies: 35
Views: 2674

Re: What Have You Done to Your Model T in February?

Nice looking wheels, Greg. I know how much work is involved sealing, priming, topcoating, cut and color sanding and finally buffing out. Takes forever but the result is worth it. When you mount the tubes and tires, mount them from the inside of the wheels. You'll invariably have scratches to touch u...
by RGould1910
Mon Feb 19, 2024 6:29 pm
Forum: General Discussion Forum
Topic: 26-27 rear brakes
Replies: 10
Views: 530

Re: 26-27 rear brakes

Dan and Robert's experience mirrors mine. It's also worth noting that many brake shoes are not round and the lining has high and low spots relative to the drum surface. I used Prussian blue to discover the rubbing spots and proceeded from there.
by RGould1910
Sat Feb 17, 2024 3:28 pm
Forum: Classifieds - Vehicles
Topic: Beautiful January 1915 Roadster with salesman box
Replies: 7
Views: 2350

Re: Beautiful January 1915 Roadster with salesman box

You've always been helpful and a pleasure to deal with. Really sorry to hear this terrible news. If I can help out some way, let me know. Richard
by RGould1910
Sat Feb 10, 2024 5:21 pm
Forum: Classifieds - Parts
Topic: Fairbanks screw press
Replies: 1
Views: 449

Fairbanks screw press

Received an email thru the website from a fellow stating he has one available and would send photos if I was interested but left no contact information to respond to. Yes I am interested. Please contact me again
Richard
by RGould1910
Sat Feb 03, 2024 2:10 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Re: Restoring a KR Wilson transmission fixture

It just occurred to me that the shank keeper and corresponding holes in the shells may not be factory installed but done by some user down the road.
It doesn't make sense they wouldn't fit.
20240203_111242.jpg
by RGould1910
Sat Feb 03, 2024 2:02 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Re: Restoring a KR Wilson transmission fixture

That makes perfect sense since only the top of the fixture compresses. I was thinking about letting the reamer center the drum then clamp it like you said. I may use the lathe to take a small cut on the bushing to give the reamer a place to start, then align the drum on the bevel of the reamer. By t...
by RGould1910
Fri Feb 02, 2024 6:19 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Re: Restoring a KR Wison transmission fixture

These photos show the two machined surfaces in the Wilson fixture trued with a flycutter. When cutting the outer surface, the bit is set close to the edge of the machined surface that holds the transmission drum. The fixture is turned with the rotary table while the flycutter is moving. The alignmen...
by RGould1910
Wed Jan 31, 2024 10:31 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Re: Restoring a KR Wison transmission fixture

More work accomplished. The first photo shows the alignment of the rotary table. The alignment rod (the third) was long enough to allow mounting the rotary table, the chuck and Wilson fixture on the bed when finished. The vertical travel on the mill drill is only 5 inches requiring raising the head ...
by RGould1910
Tue Jan 30, 2024 2:15 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Restoring a KR Wilson transmission fixture

Last year I purchased a KR Wilson transmission fixture complete with reamers. Upon inspection I saw the hole in the fixture was badly worn and the reamers needed sharpening. I sent the reamers out and made a sleeve to insert in the bored hole of the fixture. I don't have a Bridgeport or an auto feed...
by RGould1910
Sat Jan 27, 2024 10:47 am
Forum: General Discussion Forum
Topic: Can we bypass aux. water pump?
Replies: 9
Views: 525

Re: Can we bypass aux. water pump?

Most water pumps have enough clearance between the impeller and the housing to allow water to pass if the pump is not moving. I'm confident they were made that way to protect the engine from over heating if the pump failed due to any number.of reasons. However I saw one pump where the impeller was a...
by RGould1910
Mon Jan 15, 2024 10:57 pm
Forum: General Discussion Forum
Topic: Rootlieb apron to fender mate
Replies: 21
Views: 1184

Re: Rootlieb apron to fender mate

Greg, the bracket in your photo is the same as those off my 1912 roadster. The fenders were trash but I saved the brackets. They may have been factory installed.
I thought.I saw them on the late Phil Minos car at Tulare a couple years ago.
by RGould1910
Mon Jan 15, 2024 12:32 pm
Forum: General Discussion Forum
Topic: What to expect from a Stromberg OF
Replies: 7
Views: 542

Re: What to expect from a Stromberg OF

I don't know Andy, I'd leave well enuf alone. I installed an OF on my 27 with electric start and I honestly don't see much difference in performance between it and a straight thru NH it replaced. It does idle better however. Can't address your question re an OF on a crank start car but you'd need a ...
by RGould1910
Mon Jan 15, 2024 10:23 am
Forum: General Discussion Forum
Topic: Rootlieb apron to fender mate
Replies: 21
Views: 1184

Re: Rootlieb apron to fender mate

I've seen riveted butterfly shaped pieces of sheet metal installed on what appear to be original cars. Ive seen them installed on both the front and rear spaces between the fender skirts and the edges of the splash aprons to close gaps and prevent rattles. Without them you need some gaps otherwise t...
by RGould1910
Sat Jan 13, 2024 2:48 pm
Forum: General Discussion Forum
Topic: exhaust manifold
Replies: 19
Views: 1044

Re: exhaust manifold

Thanks Steve!
by RGould1910
Sat Jan 13, 2024 11:11 am
Forum: General Discussion Forum
Topic: exhaust manifold
Replies: 19
Views: 1044

Re: exhaust manifold

Question. Are the glands the same diameter as a T exhaust pipe or must I find another size tubing?
by RGould1910
Sat Dec 30, 2023 2:57 pm
Forum: General Discussion Forum
Topic: Best home cleaning method for large parts?
Replies: 7
Views: 860

Re: Best home cleaning method for large parts?

Update. Zep Industrial Purple worked wonders. Still need to oil the rod jig. Thank you Dan.
20231230_114649.jpg
20231229_165718.jpg
20231229_165708.jpg
by RGould1910
Fri Dec 29, 2023 5:29 pm
Forum: General Discussion Forum
Topic: Solid rubber tires & felloes
Replies: 13
Views: 906

Re: Solid rubber tires & felloes

I don't know. I tried solid rubber front tires on a 1916 touring car some years ago and I didn't notice much, if any difference, in the ride at the speeds I drive. Today we drive on paved roads. Would I try it again?. Probably not, but they weren't bad.
by RGould1910
Tue Dec 26, 2023 12:05 am
Forum: General Discussion Forum
Topic: Best home cleaning method for large parts?
Replies: 7
Views: 860

Re: Best home cleaning method for large parts?

Thanks for the suggestions. I do have the triple gear piece
by RGould1910
Mon Dec 25, 2023 4:55 pm
Forum: General Discussion Forum
Topic: Best home cleaning method for large parts?
Replies: 7
Views: 860

Re: Best home cleaning method for large parts?

Hi Steve. I purchased the Wilson set up complete with the reamers and timing gear holder. I noticed the J hooks are 23/64" in diameter, not 3/8". That surprised me. The shanks of the reamers (except for the driving plate bushing reamer) are worn a couple thou undersize. The fixture bore is worn the ...
by RGould1910
Mon Dec 25, 2023 1:05 pm
Forum: General Discussion Forum
Topic: Best home cleaning method for large parts?
Replies: 7
Views: 860

Best home cleaning method for large parts?

Need to clean these parts. What's the best and easiest cleaning method to use at home?
20231225_100047.jpg
20231225_100007.jpg
20231225_095957.jpg
by RGould1910
Tue Dec 19, 2023 1:36 pm
Forum: General Discussion Forum
Topic: My Christmas Present to Me
Replies: 28
Views: 1423

Re: My Christmas Present to Me

I personally would opt for painted wood wheels. I'm not a fan of either wires or natural/stained wood wheels. That said, they are a real pain to paint smooth like a body.
20230827_133522.jpg
20230827_133556.jpg
by RGould1910
Tue Dec 12, 2023 4:32 pm
Forum: General Discussion Forum
Topic: transmission questions
Replies: 11
Views: 615

Re: transmission questions

"I chug through that and it eventually smooths out somewhat but I've got a LOUD gear chatter while in hi and from under the floorboards" Gear chatter bothers me. I personally would pull the engine and check everything from the 4 flywheel bolts to the tailshaft. That said, rear end noise typically so...
by RGould1910
Tue Dec 12, 2023 3:29 pm
Forum: General Discussion Forum
Topic: Covid struck again
Replies: 6
Views: 660

Covid struck again

Happy and relieved to report that after three weeks of covid illness, I teated negative this morning. It was a tough one requiring a short hospital stay. Although I still have symptoms, they are manageable. I'm so happy I took the antiviral Paxlovid starting the day I tested postive. I'd hate to ima...
by RGould1910
Wed Dec 06, 2023 1:17 pm
Forum: General Discussion Forum
Topic: Need some advice Stain Colors
Replies: 13
Views: 630

Re: Need some advice Stain Colors

Here's a photo of the dark blue and black recommended to me together with the cherry red varnish to illustrate how they look together. I have the formulas for the paint provided by Russ Furstnow. I still have some of the cherry stain/varnish in a can. If you'd like further info shoot me an email. 20...
by RGould1910
Thu Nov 30, 2023 8:13 pm
Forum: Classifieds - Vehicles
Topic: FS 1906 Model N Ford
Replies: 5
Views: 1418

Re: FS 1906 Model N Ford

Nice work, Perry. Looks like you put a lot of time into that car.
by RGould1910
Wed Nov 29, 2023 1:31 pm
Forum: Services
Topic: HCCT (Hand Crank Coil Tester) Meter Repair
Replies: 13
Views: 4368

Re: HCCT (Hand Crank Coil Tester) Meter Repair

I for one didn't realize all these additional products were available and appreciate the post
by RGould1910
Mon Nov 27, 2023 1:51 am
Forum: General Discussion Forum
Topic: Radiator Hose Options?
Replies: 20
Views: 1036

Re: Radiator Hose Options?

Good info Frank!
by RGould1910
Mon Nov 20, 2023 3:28 pm
Forum: General Discussion Forum
Topic: Cracked block
Replies: 22
Views: 1611

Re: Cracked block

I used JB Weld, the original not the quick stuff with embedded window screen and it held up well. The secret is a thick application.
by RGould1910
Mon Nov 13, 2023 9:20 am
Forum: Classifieds - Parts
Topic: FS NOS bearings, straight through Holley NH
Replies: 8
Views: 818

Re: FS NOS bearings, straight through Holley NH

Email sent re roller bearing
by RGould1910
Tue Oct 31, 2023 12:37 pm
Forum: General Discussion Forum
Topic: My 1912 "Grand Champion"
Replies: 11
Views: 879

Re: My 1912 "Grand Champion"

Absolutely stunning!!
by RGould1910
Fri Oct 27, 2023 2:55 pm
Forum: Classifieds - Parts
Topic: WTB: Scandinavia Linings Pre 26 ;Brake Lining Failure Fall Tour Put Me on the Vulture Wagon
Replies: 16
Views: 695

Re: WTB: Scandinavia Linings Pre 26 ;Brake Lining Failure Fall Tour Put Me on the Vulture Wagon

I Agree wit Steve's comments about Kevlar and the durability of the earlier Scandis. Those who insist that broken drums are due solely to improper installation or driving habits should speak with Loco Larry of the Tin Shed. I saw a large pile of broken drums in his shop he claims were from Kevlar tr...
by RGould1910
Sat Oct 21, 2023 11:44 am
Forum: General Discussion Forum
Topic: Facebook Find - Stewart Speedometer
Replies: 12
Views: 666

Re: Facebook Find - Stewart Speedometer

Larry is correct re the year. But the head will work with the road gear not the swivel. You need a 2 1/2 to 1 ratio swivel and a small gear to match. Furstnows book is a great resource. Especially the first one.
by RGould1910
Wed Sep 27, 2023 12:24 pm
Forum: General Discussion Forum
Topic: William "Bill" Woodke
Replies: 1
Views: 258

Re: William "Bill" Woodke

Seems like he was a wonderful man.
by RGould1910
Tue Sep 26, 2023 5:31 pm
Forum: General Discussion Forum
Topic: Early sediment bowl
Replies: 1
Views: 229

Early sediment bowl

Is this Model T sediment bowl?
The neck is shorter than a photo I've seen. What years was it used?
20230926_142832.jpg
by RGould1910
Mon Sep 25, 2023 3:11 pm
Forum: General Discussion Forum
Topic: Rear axel seal replacement
Replies: 7
Views: 528

Re: Rear axel seal replacement

Amen to what Mark said
by RGould1910
Wed Sep 20, 2023 8:29 pm
Forum: Classifieds - Parts
Topic: Carriage Bolts
Replies: 3
Views: 372

Re: Carriage Bolts

Larry check out Blacksmith Bolt and Rivet Supply
by RGould1910
Wed Sep 20, 2023 6:42 pm
Forum: General Discussion Forum
Topic: Lapping brass petcocks
Replies: 15
Views: 614

Re: Lapping brass petcocks

My experience has mirrored Jeff's above. Latest venture using the valve lube sold by Langs did the trick on a brass fuel shut off that continued to leak after lapping with yellow Timesaver. It's not cheap but it works! I agree it's easy to lap too aggressively and ruin the piece. Been there, done th...
by RGould1910
Wed Sep 20, 2023 11:01 am
Forum: General Discussion Forum
Topic: AC brakes
Replies: 13
Views: 736

Re: AC brakes

That's a nice looking coupe Jim. Do you have a photo you wouldn't mind posting of the John Stoltz equalizer? BTW thank you to all who've responded. I appreciate the input.
by RGould1910
Tue Sep 19, 2023 1:31 pm
Forum: General Discussion Forum
Topic: AC brakes
Replies: 13
Views: 736

Re: AC brakes

My concern is whether rods from the hand brake levers will work. Do they pass under the running board brackets, radius rods etc without interference?. Can I use the Fords clevises to connect the rods to the brakes or is a short license of cable a better option? Etc. Don Tyler has a set up where the ...
by RGould1910
Mon Sep 18, 2023 9:32 pm
Forum: General Discussion Forum
Topic: AC brakes
Replies: 13
Views: 736

AC brakes

I like to hear about the feasibility of using brake rods to the AC brakes in lieu of the cable set up. Im thinking about removing the parking brakes and having the rods from the handbrake go to the AC brakes. Any suggestions, recommendations, cautions, etc. appreciated.
by RGould1910
Mon Sep 18, 2023 9:20 pm
Forum: General Discussion Forum
Topic: 1911-12 Fender Irons with hole (eyelet)
Replies: 5
Views: 305

Re: 1911-12 Fender Irons with hole (eyelet)

A car with date stamp on the rear spring of Dec '11 had them. I thought I read they were in production only three months. Possibly notes from Mc Calleys book.
by RGould1910
Mon Sep 18, 2023 5:19 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Keith I'm hoping you can get another crankshaft ground to the sames specs as the broken one and not have to disturb your rods and mains much. Mabe just light fitting with Timesaver. Erik Barrett has a whole bunch of good crankshafts. I've has good luck using Carl Grindstaff in Redding to grind T cra...
by RGould1910
Sun Sep 17, 2023 12:21 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Thank you Greg for your kind words. Let me know if I can be of any help on you restoration. 😀
by RGould1910
Sat Sep 16, 2023 9:00 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

I know I've probably posted too much about my 1912 roadster but I am celebrating g a 20 year effort (on and off) to complete this restoration. Today I finished. Still have to bring the car to Ernie Romero next Spring for a top and waiting to meet with Russ Furstnow at Tulare for help with the speedo...
by RGould1910
Sat Sep 16, 2023 12:12 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Thanks for the input. I considered silver solder but opted for a mechanical repair. I the other end comes apart, I'll go with silver solder because ther is no way to install a screw.

Your observation prompted me to use Loctitie.I think there is enuf thread engagement to hold things togther.
by RGould1910
Tue Sep 12, 2023 2:43 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Finished the windshield bumpers.
20230912_111941.jpg
20230912_110853.jpg
20230912_105151.jpg
by RGould1910
Mon Sep 11, 2023 10:38 pm
Forum: General Discussion Forum
Topic: Brass windshield bumpers
Replies: 13
Views: 1078

Re: Brass windshield bumpers

I've puchased some rubber bumpers ans wish to attach them with screws. Im thinking of screwing them into the bottom horizontal frame just inside the clamps on the outer edged of the firewall. Here's the rub. I have a Speedway Motors windshield frame and don't know if the slugs on the bottom curved c...
by RGould1910
Mon Sep 11, 2023 3:57 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Repaired a broken horn bulb bracket. Langs says the soldered joint often breaks. Mine did. I saw no sense In resoldering so I did a mechanical repair with a 10 32 machine screw and a small copper washer using blue Loctote to hold things tight.
20230911_123907.jpg
20230911_123416.jpg
by RGould1910
Mon Sep 04, 2023 3:30 pm
Forum: General Discussion Forum
Topic: 1912 commercial roadster
Replies: 1
Views: 298

Re: 1912 commercial roadster

I don't have any pictures but considered replacing the rear seat with some railing. Mr. Mari, the fellow who recently made the cast iron stoves for 1912 carburetors, was making very nice looking railing from brass tubing. If you search the net I think you can finds photos of what I'm talking about. ...
by RGould1910
Fri Sep 01, 2023 1:25 pm
Forum: Classifieds - Parts
Topic: Wtb mirror
Replies: 4
Views: 425

Re: Wtb mirror

Decided to go with the eBay mirrors after David's favorable review and seeing a photo of them installed on a car with windshield rods. Thanks for your help David.
by RGould1910
Fri Sep 01, 2023 12:35 am
Forum: Classifieds - Parts
Topic: Wtb mirror
Replies: 4
Views: 425

Re: Wtb mirror

Thanks for the info David. I'm seriously considering buying two for my car. I want to make sure I can set the mirrors high enuf on the lower windshield frame to screw into the slugs and still clear the windshield rods. Matt thanks for the tip. I gave Norm a buzz and he's checking his inventory to se...
by RGould1910
Fri Sep 01, 2023 12:26 am
Forum: General Discussion Forum
Topic: Looking for Stevens Front Axle tool owners
Replies: 20
Views: 1073

Re: Looking for Stevens Front Axle tool owners

Dan what do you charge for doing both forks top and bottom and refacing the thrust surfaces?
I just did one side on an axle in the car and it took me 3 plus hours.
by RGould1910
Fri Sep 01, 2023 12:12 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in August?
Replies: 44
Views: 3803

Re: What have you done to your Model T in August?

I got the 12 roadster on the road finally. Also made a new float for a 5 ball from a block of closed cell material purchased from Langs years ago snd a couple f minor minor things.
20230829_184220.jpg
20230829_170601.jpg
20230829_184158.jpg
20230827_133556.jpg
20230831_142332.jpg
by RGould1910
Thu Aug 31, 2023 10:33 pm
Forum: Classifieds - Parts
Topic: Two (2) NOS timers for sale Sold
Replies: 4
Views: 530

Re: Two (2) NOS timers for sale

Email sent
by RGould1910
Tue Aug 29, 2023 11:55 pm
Forum: General Discussion Forum
Topic: Brass door strips
Replies: 13
Views: 634

Re: Brass door strips

Thanks for all the helpful information. Steve Tomaso was kind enough to offer me a set of NORS sill plates which I am purchasing. They are the skinny type with a checkerboard background and Ford logo
by RGould1910
Tue Aug 29, 2023 5:38 pm
Forum: General Discussion Forum
Topic: Brass door strips
Replies: 13
Views: 634

Re: Brass door strips

I need skinny ones with a checkered background and the Ford logo
by RGould1910
Tue Aug 29, 2023 1:39 pm
Forum: General Discussion Forum
Topic: Brass door strips
Replies: 13
Views: 634

Re: Brass door strips

All vendors are out of stock and it's unlikely more will be reproduced. If someone has dimensions, location of screw holes, etc I could make something to protect the sills.
by RGould1910
Tue Aug 29, 2023 1:01 pm
Forum: General Discussion Forum
Topic: Brass door strips
Replies: 13
Views: 634

Re: Brass door strips

Geez, thanks John. These old eyes aren't as sharp as they were I guess :ugeek:
by RGould1910
Tue Aug 29, 2023 11:50 am
Forum: General Discussion Forum
Topic: Brass door strips
Replies: 13
Views: 634

Brass door strips

Been thru Langs cataloge and can't find the brass door strips that are used on 1912 cars to cover the front compartment threshold. Did I miss something? Are these available?
by RGould1910
Sun Aug 27, 2023 2:38 pm
Forum: General Discussion Forum
Topic: Brass windshield bumpers
Replies: 13
Views: 1078

Re: Brass windshield bumpers

Thanks Brad
by RGould1910
Sat Aug 26, 2023 10:52 am
Forum: Classifieds - Parts
Topic: Wtb mirror
Replies: 4
Views: 425

Wtb mirror

Looking for a decent mirror to mount on my 1912 roadster windshield. Not interested in the cheap round ones available today from the parts houses. If anyone has Vintique rectangular mirror they would be willing to part with I'd certainly be interested
by RGould1910
Fri Aug 25, 2023 11:18 pm
Forum: General Discussion Forum
Topic: weld repair on axle by the keyway
Replies: 36
Views: 1618

Re: weld repair on axle by the keyway

Interested in your reasoning why you wouldn't use an axle with a second keyway and why no part of an axle should be welded.
by RGould1910
Fri Aug 25, 2023 6:24 pm
Forum: General Discussion Forum
Topic: weld repair on axle by the keyway
Replies: 36
Views: 1618

Re: weld repair on axle by the keyway

Curious why you say that Jerry. While a new keyway weakens the axle some, I wouldn't think it serious enough to cause failure on today's roads. Welding runs a risk of making the stub brittle. Not knowing what the axles are made of, that's just a concern not a fact. But still a risk a breakage. Your ...
by RGould1910
Fri Aug 25, 2023 10:04 am
Forum: General Discussion Forum
Topic: 1927 Coupe Before Restoration
Replies: 8
Views: 734

Re: 1927 Coupe Before Restoration

Kudos on a quality restoration. The car is a pleasure to behold
by RGould1910
Thu Aug 24, 2023 9:02 pm
Forum: General Discussion Forum
Topic: weld repair on axle by the keyway
Replies: 36
Views: 1618

Re: weld repair on axle by the keyway

First of all John, the poster asked about whether a specific repair would work. I'm sure he knows he can replace the axle with a modern one. With regard to cutting a new keyway, I've often thought of doing that myself on a number of axles I've collected over the years. However I don't have the tooli...
by RGould1910
Thu Aug 24, 2023 6:29 pm
Forum: General Discussion Forum
Topic: weld repair on axle by the keyway
Replies: 36
Views: 1618

Re: weld repair on axle by the keyway

This thread is about repair.
by RGould1910
Thu Aug 24, 2023 3:46 pm
Forum: General Discussion Forum
Topic: Cylinder Head Flatness
Replies: 16
Views: 1037

Re: Cylinder Head Flatness

I've had issues with the new generation gasket material not holding torque. You shouldn't have to retorque but once.
by RGould1910
Thu Aug 24, 2023 3:39 pm
Forum: General Discussion Forum
Topic: weld repair on axle by the keyway
Replies: 36
Views: 1618

Re: weld repair on axle by the keyway

I've thought of doing d the same thing to my axles whose only problem is a buggered keyway. Good to hear about your and your dads experience.
by RGould1910
Mon Aug 21, 2023 8:12 pm
Forum: General Discussion Forum
Topic: Brass windshield bumpers
Replies: 13
Views: 1078

Re: Brass windshield bumpers

Russ that's what I envisioned. I'll have to do some thinking how to attach them.
by RGould1910
Mon Aug 21, 2023 3:50 pm
Forum: General Discussion Forum
Topic: Brass windshield bumpers
Replies: 13
Views: 1078

Re: Brass windshield bumpers

Thanks for the suggestions, fellas. What I see in your photo doesn't resemble what I remenber, Rich. Thanks for the reply and offer though.
by RGould1910
Mon Aug 21, 2023 12:31 pm
Forum: General Discussion Forum
Topic: N's, R's & S's
Replies: 18
Views: 1313

Re: N's, R's & S's

There were a few touring bodies made for a Model S roadster. Cecil Church had one and there is a period photo of one displayed on a floor room in London. I assume they were Ford bodies. If memory serves there is one illustrated on the cover of an old issue the MTFIC mag. That may have been Church's....
by RGould1910
Mon Aug 21, 2023 10:40 am
Forum: Classifieds - Parts
Topic: carriage bolts.
Replies: 4
Views: 572

Re: carriage bolts.

Allen, for hard to find hardware, try Blacksmith Bolt & Rivet Supply. I purchased some blackened step bolts there I couldn't find elsewhere. Also some heavy square nuts and round head slotted wood screws, all blackened.
by RGould1910
Mon Aug 21, 2023 10:32 am
Forum: Classifieds - Parts
Topic: F.S. NOS Kingpins and Bushings
Replies: 12
Views: 1261

Re: F.S. NOS Kingpins and Bushings

As a suggestion, try selling them individually or in sets. I would like to purchase at least one set and extra bushings but would never have a use for all of them.
Richard Gould
915 215 5316. Call or text
by RGould1910
Sat Aug 19, 2023 9:42 am
Forum: General Discussion Forum
Topic: Help on Ring Gear Useable or Not
Replies: 8
Views: 649

Re: Help on Ring Gear Useable or Not

Absolutely agree re tooth contact although I still think a loose fit is best. Been there many times.
by RGould1910
Fri Aug 18, 2023 10:28 pm
Forum: General Discussion Forum
Topic: Wood band question
Replies: 7
Views: 657

Re: Wood band question

Good info Steve!
by RGould1910
Fri Aug 18, 2023 10:27 pm
Forum: General Discussion Forum
Topic: Help on Ring Gear Useable or Not
Replies: 8
Views: 649

Re: Help on Ring Gear Useable or Not

Absolutely agree. I've got at least 2 dozen used ring gears and none look that good. I recommend setting things up on the loose side. The quietest rear end I've rebuilt had 15 thou lash.
Thank God it's one I kept. It's under the 12 now.