Search found 238 matches
- Mon Feb 26, 2024 10:26 am
- Forum: General Discussion Forum
- Topic: mtfca google search
- Replies: 0
- Views: 234
mtfca google search
searching using mtfca on google is working again. philip
- Thu Feb 08, 2024 8:42 am
- Forum: General Discussion Forum
- Topic: Floating Hubs / Safety Hubs
- Replies: 15
- Views: 1323
Re: Floating Hubs / Safety Hubs
on these i used chamferd nuts but i didnt like them
- Thu Feb 08, 2024 8:38 am
- Forum: General Discussion Forum
- Topic: Floating Hubs / Safety Hubs
- Replies: 15
- Views: 1323
- Thu Feb 08, 2024 8:34 am
- Forum: General Discussion Forum
- Topic: Floating Hubs / Safety Hubs
- Replies: 15
- Views: 1323
Re: Floating Hubs / Safety Hubs
i also just tap the holes for the thru bolts on my current design. bolts go in from outside.
better but you see the hex heads but less clearance issues and you can check tightness
better but you see the hex heads but less clearance issues and you can check tightness
- Thu Feb 08, 2024 8:30 am
- Forum: General Discussion Forum
- Topic: Floating Hubs / Safety Hubs
- Replies: 15
- Views: 1323
Re: Floating Hubs / Safety Hubs
i use 2 big o rings to seal it then t put a groove that lines up with the grease cup. tap the hole in
the grease cup and put a set screw there cap then hides it. the extra holes are for holes i tap in the inner
hub flange.
the grease cup and put a set screw there cap then hides it. the extra holes are for holes i tap in the inner
hub flange.
- Wed Feb 07, 2024 1:33 pm
- Forum: General Discussion Forum
- Topic: Floating Hubs / Safety Hubs
- Replies: 15
- Views: 1323
Re: Floating Hubs / Safety Hubs
they work great and have a nice big sealed bearing here is how i make mine these are not finished but
you can see the design
you can see the design
- Tue Jan 23, 2024 8:08 pm
- Forum: General Discussion Forum
- Topic: tires
- Replies: 9
- Views: 688
Re: tires
Too expensive
- Tue Jan 23, 2024 2:13 pm
- Forum: General Discussion Forum
- Topic: shocks
- Replies: 10
- Views: 761
Re: shocks
bill can you give me a picture of the mounts?
- Tue Jan 23, 2024 10:06 am
- Forum: General Discussion Forum
- Topic: tires
- Replies: 9
- Views: 688
tires
looking at getting tires any reviews on the lucas olympic 449/450 21 at 119.00
and i notice an excelsior 450 475 21 at 106.00
and i notice an excelsior 450 475 21 at 106.00
- Mon Jan 22, 2024 3:43 pm
- Forum: General Discussion Forum
- Topic: shocks
- Replies: 10
- Views: 761
Re: shocks
thanks mark i found that one there is one somewhere that shows the fronts
- Mon Jan 22, 2024 3:15 pm
- Forum: General Discussion Forum
- Topic: shocks
- Replies: 10
- Views: 761
Re: shocks
there was a thread on the subject but i have no luck searching anymore
- Mon Jan 22, 2024 2:53 pm
- Forum: General Discussion Forum
- Topic: shocks
- Replies: 10
- Views: 761
shocks
looking for information on putting modern shocks on a model t. what shocks and how to mount.philip
- Tue Jan 02, 2024 11:14 am
- Forum: Classifieds - Parts
- Topic: For Sale Complete 1909 Mother-in- Law roadster or will part out
- Replies: 2
- Views: 698
Re: For Sale Complete 1909 Mother-in- Law roadster or will part out
not that i could buy it but what is the price?
- Mon Nov 27, 2023 3:28 pm
- Forum: General Discussion Forum
- Topic: T wire wheels vs. A wire wheels
- Replies: 12
- Views: 1064
Re: T wire wheels vs. A wire wheels
t wires have a smooth hub a wires have little raised things to make them stronger.
the bolt patterns are not the same
the bolt patterns are not the same
- Mon Nov 27, 2023 2:19 pm
- Forum: General Discussion Forum
- Topic: 21 inch tires
- Replies: 7
- Views: 560
Re: 21 inch tires
all aired up all marked 440-450 21
- Mon Nov 27, 2023 1:56 pm
- Forum: General Discussion Forum
- Topic: 21 inch tires
- Replies: 7
- Views: 560
21 inch tires
i recently bought a set of 21 inch wire wheels. the tires are in good shape 440-450-21
the outer dia is 28 inches the ones i have now are 31 outer dia. i have 4 of them i guess
they will look ok any thoughts on why the difference. philip
the outer dia is 28 inches the ones i have now are 31 outer dia. i have 4 of them i guess
they will look ok any thoughts on why the difference. philip
- Fri Nov 17, 2023 1:38 pm
- Forum: Classifieds - Parts
- Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
- Replies: 13
- Views: 952
Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each
i can do the machining do you have anymore of that metal to sell?
- Thu Nov 16, 2023 8:35 pm
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
It's all good I will get them straight
- Thu Nov 16, 2023 8:21 pm
- Forum: Classifieds - Parts
- Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
- Replies: 13
- Views: 952
Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each
They look like t wood to a wire did you use them?
- Thu Nov 16, 2023 7:53 pm
- Forum: Classifieds - Parts
- Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
- Replies: 13
- Views: 952
Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each
I need adaptors to go from t wood wheels to a wire wheels
Just checking your add says t wire wheels
Just checking your add says t wire wheels
- Thu Nov 16, 2023 7:50 pm
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
Henry I would have bought them but your add says model t wood to wire
I need model t wood to model a wire
I need model t wood to model a wire
- Thu Nov 16, 2023 3:06 pm
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
i agree it is not a perfect solution but for now it will hopefully give me round wheels that dont wobble.
- Thu Nov 16, 2023 3:02 pm
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
if i used t wires i would need t wire hubs or some adapter. i will make my own adapters
- Thu Nov 16, 2023 1:34 pm
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
i currently have 21 inch wood wheels and the rims are bent and wobbly. new rims are 2000
old ones i find are all bent. i bought 5 28 29 wheels for 500 i think it will improve my ride
quality. philip
old ones i find are all bent. i bought 5 28 29 wheels for 500 i think it will improve my ride
quality. philip
- Thu Nov 16, 2023 8:42 am
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
Re: a wheel adaptors
i have everything but the outside diameter i can wait until i get the wheels but if someone can measure one
i can order the metal. philip
i can order the metal. philip
- Mon Nov 13, 2023 10:46 am
- Forum: General Discussion Forum
- Topic: a wheel adaptors
- Replies: 22
- Views: 1062
a wheel adaptors
does anyone have a drawing for the adapters to put a wire wheels on t wood hubs.
will aluminum work ? philip
will aluminum work ? philip
- Mon Jul 24, 2023 10:57 am
- Forum: General Discussion Forum
- Topic: bearing clearance
- Replies: 13
- Views: 3170
Re: bearing clearance
i think i used the green
- Wed Jul 19, 2023 8:38 pm
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
Thanks les. My question is would I be better of with manual advance with this setup
- Wed Jul 19, 2023 6:19 am
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
Did you cast the body?
- Tue Jul 18, 2023 10:17 am
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
yes i have the bracket and a badly worn vega dist. made by jess blker. i bought a new dist.
but i would like to see how jess did the bearing
but i would like to see how jess did the bearing
- Tue Jul 18, 2023 8:44 am
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
does anyone have any information on these units i have parts but not the bearings
- Sun Jul 16, 2023 7:16 am
- Forum: General Discussion Forum
- Topic: DELIMA - MOTOR MISSING on 3 & 4
- Replies: 15
- Views: 931
Re: DELIMA - MOTOR MISSING on 3 & 4
I have the same issue I think it is weak fire that does not fire the plug under
Compression. I'm going to try a distributor
Compression. I'm going to try a distributor
- Tue Jul 11, 2023 9:50 am
- Forum: Classifieds - Parts
- Topic: wanted distributor
- Replies: 0
- Views: 325
wanted distributor
i am looking fora distributor like texas t parts or langs sells thought i would
ask here first. philip
ask here first. philip
- Mon Apr 24, 2023 9:57 am
- Forum: General Discussion Forum
- Topic: Triple gear bushings melted ???
- Replies: 42
- Views: 3590
Re: Triple gear bushings melted ???
im with les find the best original gears and bushings with new pins. philip
- Thu Mar 09, 2023 11:03 am
- Forum: General Discussion Forum
- Topic: Hardening valve stems!
- Replies: 5
- Views: 918
Re: Hardening valve stems!
i would rather have the valve wear than the lifter
- Wed Mar 08, 2023 1:00 pm
- Forum: General Discussion Forum
- Topic: Where to set float level....
- Replies: 4
- Views: 755
Re: Where to set float level....
i set mine as high as possible without leaking
- Thu Mar 02, 2023 10:55 am
- Forum: Classifieds - Parts
- Topic: Full Flow Float Valves - Spring Production complete - shipments going out! Get ready for Touring Season
- Replies: 7
- Views: 1338
Re: Full Flow Float Valves - Spring Production finally underway
i agree they work great
- Sun Feb 12, 2023 11:07 am
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs 400.00
Hubs are sold thanks mtfca
- Sat Feb 11, 2023 6:19 am
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs 400.00
These hubs work great I have been running mine for years.
- Wed Feb 08, 2023 6:33 am
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs 400.00
Stop for sale
- Mon Feb 06, 2023 8:58 am
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs new price
these are for wood wheels
- Sun Feb 05, 2023 9:52 am
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs
Still for sale
- Fri Feb 03, 2023 3:35 pm
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
Re: floating hubs
i should add plus shipping. thanks
- Fri Feb 03, 2023 3:30 pm
- Forum: Classifieds - Parts
- Topic: floating hubs 400.00
- Replies: 9
- Views: 1845
floating hubs 400.00
[image][/image]i have a set of floating hubs for sale. they include all of the bolts not pictured and an instruction sheet.
the vendors get about 630.00 i will take 400.00 for the set with all of the bolts. philip
336 212 6927
the vendors get about 630.00 i will take 400.00 for the set with all of the bolts. philip
336 212 6927
- Tue Dec 13, 2022 2:57 pm
- Forum: Classifieds - Parts
- Topic: WTB spokes
- Replies: 1
- Views: 473
WTB spokes
i need 24 of the 5\8 tenon and 24 of the .530 tenon spokes for 21 inch steel fellow
wheels. i can get from langs just wanted to see if someone had some they dont need.
philip
wheels. i can get from langs just wanted to see if someone had some they dont need.
philip
- Tue Dec 13, 2022 2:33 pm
- Forum: General Discussion Forum
- Topic: new spokes
- Replies: 13
- Views: 1405
Re: new spokes
our club chapter already has the press and some guys that have done the wheels. philip
- Tue Dec 13, 2022 11:07 am
- Forum: General Discussion Forum
- Topic: new spokes
- Replies: 13
- Views: 1405
new spokes
my 24 touring has 21 inch wood spoke wheels. i need to replace the spokes. the rears have the 5\8 tang
the fronts are hard to measure and i dont want to tear them apart yet it seems reading langs catalog
most us cars had .530 spoke ends. any thoughts
the fronts are hard to measure and i dont want to tear them apart yet it seems reading langs catalog
most us cars had .530 spoke ends. any thoughts
- Fri Dec 09, 2022 2:22 pm
- Forum: Classifieds - Parts
- Topic: Set of used .060” pistons (Sold, pending)
- Replies: 5
- Views: 803
Re: Set of used .060” pistons for sale
i will take them. philip
- Mon Nov 28, 2022 11:02 am
- Forum: General Discussion Forum
- Topic: Bent Scat crankshaft
- Replies: 60
- Views: 7519
Re: Bent Scat crankshaft
it is as good or better than i get when i have them ground. they are too small and flex like crazy.
in your situation i would run it. it is better than what i put in my engine and im driving. philip
in your situation i would run it. it is better than what i put in my engine and im driving. philip
- Mon Oct 24, 2022 11:27 am
- Forum: General Discussion Forum
- Topic: Valve grinding.
- Replies: 10
- Views: 1358
Re: Valve grinding.
the new way set you want is their small engine set be sure to order the correct pilot
- Sat Sep 17, 2022 7:54 pm
- Forum: General Discussion Forum
- Topic: 1912 commercial roadster top
- Replies: 8
- Views: 2403
Re: 1912 commercial roadster top
I think Don Ellis has one for sale
- Tue Sep 06, 2022 3:30 pm
- Forum: General Discussion Forum
- Topic: How do you obtain a title?
- Replies: 16
- Views: 1718
Re: How do you obtain a title?
not sure about there but in nc you ban get it inspected and then get a bonded title that is insured for 5 years
then in becomes a regular title.
then in becomes a regular title.
- Mon Aug 22, 2022 9:31 pm
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
I think I have one I have to get some pulleys and a belt
- Mon Aug 22, 2022 8:05 pm
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Re: Need blker. Distributor
I meant jess. Blker.
- Mon Aug 22, 2022 8:02 pm
- Forum: General Discussion Forum
- Topic: Need blker. Distributor
- Replies: 15
- Views: 1833
Need blker. Distributor
If anyone has any info on the jess. blker. Belt drive distributor let me know
- Thu Aug 18, 2022 8:24 pm
- Forum: Classifieds - Parts
- Topic: Wtb distributor
- Replies: 3
- Views: 770
Wtb distributor
Looking for a distributor let me know what you have. Philip
- Tue Aug 16, 2022 7:42 am
- Forum: General Discussion Forum
- Topic: Mag questions
- Replies: 10
- Views: 1391
Re: Mag questions
i would try recharging again with more power. use more batteries
- Tue Aug 02, 2022 3:50 pm
- Forum: Classifieds - Parts
- Topic: FS CROSS DRIVE MAGNETO SETUP
- Replies: 7
- Views: 1254
Re: FS CROSS DRIVE MAGNETO SETUP
mark is it all there? where do the plug wires go?
- Tue May 31, 2022 1:52 pm
- Forum: General Discussion Forum
- Topic: Has anyone used either radiator?
- Replies: 12
- Views: 1987
Re: Has anyone used either radiator?
it usually means it fits but does not look exactly like oe
- Mon May 09, 2022 7:50 am
- Forum: Classifieds - Parts
- Topic: tractor conversion help
- Replies: 3
- Views: 1192
Re: tractor conversion help
that can easily be machined
- Tue Apr 26, 2022 9:59 am
- Forum: General Discussion Forum
- Topic: Odd engine number on a 1913
- Replies: 23
- Views: 2205
Re: Odd engine number on a 1913
what is odd to me is the car was only 2 years old in 13
- Tue Apr 26, 2022 9:18 am
- Forum: General Discussion Forum
- Topic: Odd engine number on a 1913
- Replies: 23
- Views: 2205
Re: Odd engine number on a 1913
i wonder if someone replaced the 11 engine and re stamped it with the old number
- Tue Apr 26, 2022 9:15 am
- Forum: General Discussion Forum
- Topic: Odd engine number on a 1913
- Replies: 23
- Views: 2205
Re: Odd engine number on a 1913
july 11 the number mark is odd
- Thu Feb 24, 2022 6:00 am
- Forum: General Discussion Forum
- Topic: Anderson timer
- Replies: 18
- Views: 2931
Re: Anderson timer
I am currently running the Anderson with coils set on the ecct have good
May on freshly rebuilt engine it runs rough I have a new day on order I will
Report its performance.
May on freshly rebuilt engine it runs rough I have a new day on order I will
Report its performance.
- Tue Feb 22, 2022 7:48 pm
- Forum: General Discussion Forum
- Topic: Anderson timer
- Replies: 18
- Views: 2931
Anderson timer
I have read post about bending the contacts in the fall timer to fix between
Cylinder timing. I have also read that the magneto fixes this problem I would
Like to hear some opinions on this philip
Cylinder timing. I have also read that the magneto fixes this problem I would
Like to hear some opinions on this philip
- Thu Feb 17, 2022 6:40 am
- Forum: Classifieds - Parts
- Topic: engines and motometer
- Replies: 8
- Views: 2012
Re: engines and motometer
26 engine is sold
- Wed Feb 16, 2022 2:28 pm
- Forum: Classifieds - Parts
- Topic: engines and motometer
- Replies: 8
- Views: 2012
Re: engines and motometer
i think the motometer is sold pending payment
- Tue Feb 15, 2022 8:30 am
- Forum: Classifieds - Parts
- Topic: engines and motometer
- Replies: 8
- Views: 2012
engines and motometer
i have a 26 canadian engine complete out of a running car im sure it needs a rebuild the only thing i took off is the carb. it is wired has fan fan belt timer 4th main hand crank working coils coil box with lid 700.00 pick up or you pay fastenall i have a 1918 us nonstarter block head crank pan and ...
- Fri Feb 11, 2022 6:36 am
- Forum: General Discussion Forum
- Topic: Left hand thread vs right hand thread on front hubs
- Replies: 44
- Views: 5888
Re: Left hand thread vs right hand thread on front hubs
You should stop driving until you understand how spindles work
Any mechanic should be able to help you.
Any mechanic should be able to help you.
- Mon Jan 31, 2022 8:13 pm
- Forum: General Discussion Forum
- Topic: Driveshaft sleeve install
- Replies: 21
- Views: 3018
Re: Driveshaft sleeve install
I second that do the modern pinion bearing
- Fri Jan 28, 2022 3:54 pm
- Forum: General Discussion Forum
- Topic: Another look at trucks
- Replies: 28
- Views: 2551
Re: Another look at trucks
was that a bobcat on the chain. philip
- Thu Jan 20, 2022 1:28 pm
- Forum: General Discussion Forum
- Topic: Looking for tips on going back to natural colored spokes...
- Replies: 23
- Views: 2812
Re: Looking for tips on going back to natural colored spokes...
i think the paint is whats holding mine together. philip
- Thu Jan 20, 2022 12:56 pm
- Forum: General Discussion Forum
- Topic: Rings unavailable
- Replies: 15
- Views: 2589
Re: Rings unavailable
that is 5\8 thru 86 inches
- Thu Jan 20, 2022 12:56 pm
- Forum: General Discussion Forum
- Topic: Rings unavailable
- Replies: 15
- Views: 2589
Re: Rings unavailable
otto gas engine company says they can supply rings from 5\9 thru 86 inches call him he knows rings. philip
- Mon Dec 06, 2021 6:31 pm
- Forum: General Discussion Forum
- Topic: If you have driven in parades...
- Replies: 24
- Views: 3847
Re: If you have driven in parades...
I drove my 24 touring in late July in not nd 96 degree weather with my bergs .
No can belt no boiling it up eliminates overheating. Philip
No can belt no boiling it up eliminates overheating. Philip
- Mon Dec 06, 2021 6:22 pm
- Forum: General Discussion Forum
- Topic: Finally in NC - almost
- Replies: 8
- Views: 2255
Re: Finally in NC - almost
We have a wide area of members I am likely the closest we try to have some Tours in all member areas we to tech or help sessions in the cold months soon request. If yo go ahead and fill out the stuff on the website you will start getting emails letting You know what and where. We have a good group p...
- Mon Dec 06, 2021 10:36 am
- Forum: General Discussion Forum
- Topic: Finally in NC - almost
- Replies: 8
- Views: 2255
Re: Finally in NC - almost
we have a mtfca chapter the tarheel ts if you are interested. information is on our website
. philip
. philip
- Tue Nov 16, 2021 9:54 am
- Forum: General Discussion Forum
- Topic: Line boring mistake
- Replies: 12
- Views: 2342
Re: Line boring mistake
if you are using a fixture that clamps to the block like gene french makes you are on center putting
the cutter too far out has made your bores oversize. what did you line bore it with? philip
the cutter too far out has made your bores oversize. what did you line bore it with? philip
- Thu Oct 14, 2021 10:18 am
- Forum: General Discussion Forum
- Topic: Need Soldering Advice…
- Replies: 9
- Views: 1764
Re: Need Soldering Advice…
you can solder it but you must tin it with an iron first
- Tue Sep 21, 2021 8:38 am
- Forum: General Discussion Forum
- Topic: OLD PHOTO - Happyness Is A Warm Gun
- Replies: 5
- Views: 1561
Re: OLD PHOTO - Happyness Is A Warm Gun
i would say pheasant of quail going by those setters
- Thu Sep 16, 2021 3:32 pm
- Forum: General Discussion Forum
- Topic: Engine noise from freshly rebuilt engine.
- Replies: 50
- Views: 4656
Re: Engine noise from freshly rebuilt engine.
i also think .004 is a little loose on bearings
- Thu Sep 16, 2021 11:04 am
- Forum: General Discussion Forum
- Topic: Engine noise from freshly rebuilt engine.
- Replies: 50
- Views: 4656
Re: Engine noise from freshly rebuilt engine.
could be piston hitting the head
- Thu Aug 26, 2021 8:21 am
- Forum: General Discussion Forum
- Topic: High Compression Heads
- Replies: 36
- Views: 4306
Re: High Compression Heads
i am running the z head and it works great. i have had no quality or head gasket issues. philip
- Mon Aug 09, 2021 2:33 pm
- Forum: General Discussion Forum
- Topic: ethanol question. Any chemist out there?
- Replies: 23
- Views: 3454
Re: ethanol question. Any chemist out there?
i thought octane is a rating of how much pressure the fuel will withstand before it fires on its own like a diesel.
e84 ethanol fuel is 100 octane at sheets
e84 ethanol fuel is 100 octane at sheets
- Mon Jul 19, 2021 4:01 pm
- Forum: General Discussion Forum
- Topic: How to square a valve guide hole to seat?
- Replies: 6
- Views: 1477
Re: How to square a valve guide hole to seat?
it depends on how bad it is. if off just a little a good piloted valve seat cutter will work.
if it is way off it will need new seats
if it is way off it will need new seats
- Wed Jul 14, 2021 8:48 am
- Forum: General Discussion Forum
- Topic: Help...NC DMV issues with registration
- Replies: 20
- Views: 3274
Re: Help...NC DMV issues with registration
i am also in nc while i had no problem with my t i have a 46 chevy truck that had a title but had not been sent in for many years you have to get the dmv to come inspect it and record the engine number then you get an insurance agent to bond the title. fairly cheap as i recall then if someone pops u...
- Mon Jun 07, 2021 3:58 pm
- Forum: General Discussion Forum
- Topic: What year touring ?
- Replies: 20
- Views: 3058
Re: What year touring ?
i would guess 1918 or so
- Tue May 18, 2021 10:55 am
- Forum: General Discussion Forum
- Topic: Hoping to get a centerdoor to go with our touring
- Replies: 3
- Views: 1162
Re: Hoping to get a centerdoor to go with our touring
there is a guy in our club selling a center door could be the same car joe in wilksboro 828 406 7177
how much is that a in case he doesent trade? philip
how much is that a in case he doesent trade? philip
- Tue May 18, 2021 10:49 am
- Forum: General Discussion Forum
- Topic: Easy Way to Tell if 26 Touring has Floating Rear Hubs?
- Replies: 5
- Views: 1474
Re: Easy Way to Tell if 26 Touring has Floating Rear Hubs?
you should be able to see the locking screw i put mine inside the grease cup but i would pull
a wheel off that will tell you. philip
a wheel off that will tell you. philip
- Tue Apr 06, 2021 2:27 pm
- Forum: General Discussion Forum
- Topic: Digital Scale For Weighing Engine Parts
- Replies: 12
- Views: 3603
Re: Digital Scale For Weighing Engine Parts
harbor freight has one it works great about 30.00
- Tue Apr 06, 2021 8:07 am
- Forum: General Discussion Forum
- Topic: bearing clearance
- Replies: 13
- Views: 3170
Re: bearing clearance
i used a self built boring jig. it works good but i dont get the finish that i want.
the timesaver works good. philip
the timesaver works good. philip
- Mon Apr 05, 2021 1:43 pm
- Forum: General Discussion Forum
- Topic: bearing clearance
- Replies: 13
- Views: 3170
Re: bearing clearance
these are the mains im using plastigauge
- Mon Apr 05, 2021 9:47 am
- Forum: General Discussion Forum
- Topic: bearing clearance
- Replies: 13
- Views: 3170
bearing clearance
setting up my bearing clearance with time saver fresh babbitt reground crank. i have .001 on 1 .001 on 2
ans .0015 on 3 i can turn it with one hand should i let it alone it turns nice. philip
ans .0015 on 3 i can turn it with one hand should i let it alone it turns nice. philip
- Mon Mar 22, 2021 8:26 pm
- Forum: General Discussion Forum
- Topic: something you don't see anymore
- Replies: 4
- Views: 1682
Re: something you don't see anymore
You can buy them at hobby lobby but the quality is poor you have a good one. When I do thick
Leather like holsters I mark and still the holes. They have the waxed thread too. Philip
Leather like holsters I mark and still the holes. They have the waxed thread too. Philip
- Wed Mar 17, 2021 8:05 am
- Forum: General Discussion Forum
- Topic: 13T - Insufficient Cooling
- Replies: 19
- Views: 3254
Re: 13T - Insufficient Cooling
i put the same rad. on my 24 and i done even need the fan belt and im in nc where it gets real hot.
i would say you have some issue. philip
i would say you have some issue. philip
- Thu Feb 11, 2021 2:31 pm
- Forum: Classifieds - Parts
- Topic: SCAM ALERT!
- Replies: 22
- Views: 3383
Re: SCAM ALERT!
i use cashiers checks sometimes when i buy parts that i have cash to pay for they are good checks and i fully expect
the seller to cash it before sending parts. would you parts sellers rather have personal checks? philip
the seller to cash it before sending parts. would you parts sellers rather have personal checks? philip
- Wed Feb 10, 2021 2:46 pm
- Forum: General Discussion Forum
- Topic: mag ring coating
- Replies: 17
- Views: 2563
Re: mag ring coating
im with you on the welder dan works great once you understand polarity. philip
- Mon Jan 25, 2021 3:27 pm
- Forum: General Discussion Forum
- Topic: Question ,what is the side to side clearance of the rods
- Replies: 9
- Views: 2035
Re: Question ,what is the side to side clearance of the rods
likely a bent rod or loose bearing
- Mon Jan 04, 2021 12:00 pm
- Forum: General Discussion Forum
- Topic: What other than normal gas, can you run your T on?
- Replies: 31
- Views: 4428
Re: What other than normal gas, can you run your T on?
everclear is 200 proof white liquor
- Mon Dec 28, 2020 5:58 am
- Forum: General Discussion Forum
- Topic: New pistons
- Replies: 6
- Views: 1722
New pistons
Going to bore my engine for new pistons.It measures .006 over standard will .020
Overs clean up or should I go ahead and get .030 pistons thanks philip
Overs clean up or should I go ahead and get .030 pistons thanks philip