Search found 238 matches

by Philip
Mon Feb 26, 2024 10:26 am
Forum: General Discussion Forum
Topic: mtfca google search
Replies: 0
Views: 217

mtfca google search

searching using mtfca on google is working again. philip
by Philip
Thu Feb 08, 2024 8:42 am
Forum: General Discussion Forum
Topic: Floating Hubs / Safety Hubs
Replies: 15
Views: 1228

Re: Floating Hubs / Safety Hubs

on these i used chamferd nuts but i didnt like them
by Philip
Thu Feb 08, 2024 8:38 am
Forum: General Discussion Forum
Topic: Floating Hubs / Safety Hubs
Replies: 15
Views: 1228

Re: Floating Hubs / Safety Hubs

hubs
hubs.jpg
by Philip
Thu Feb 08, 2024 8:34 am
Forum: General Discussion Forum
Topic: Floating Hubs / Safety Hubs
Replies: 15
Views: 1228

Re: Floating Hubs / Safety Hubs

i also just tap the holes for the thru bolts on my current design. bolts go in from outside.
better but you see the hex heads but less clearance issues and you can check tightness
by Philip
Thu Feb 08, 2024 8:30 am
Forum: General Discussion Forum
Topic: Floating Hubs / Safety Hubs
Replies: 15
Views: 1228

Re: Floating Hubs / Safety Hubs

i use 2 big o rings to seal it then t put a groove that lines up with the grease cup. tap the hole in
the grease cup and put a set screw there cap then hides it. the extra holes are for holes i tap in the inner
hub flange.
by Philip
Wed Feb 07, 2024 1:33 pm
Forum: General Discussion Forum
Topic: Floating Hubs / Safety Hubs
Replies: 15
Views: 1228

Re: Floating Hubs / Safety Hubs

they work great and have a nice big sealed bearing here is how i make mine these are not finished but
you can see the design
by Philip
Tue Jan 23, 2024 8:08 pm
Forum: General Discussion Forum
Topic: tires
Replies: 9
Views: 650

Re: tires

Too expensive
by Philip
Tue Jan 23, 2024 2:13 pm
Forum: General Discussion Forum
Topic: shocks
Replies: 10
Views: 708

Re: shocks

bill can you give me a picture of the mounts?
by Philip
Tue Jan 23, 2024 10:06 am
Forum: General Discussion Forum
Topic: tires
Replies: 9
Views: 650

tires

looking at getting tires any reviews on the lucas olympic 449/450 21 at 119.00
and i notice an excelsior 450 475 21 at 106.00
by Philip
Mon Jan 22, 2024 3:43 pm
Forum: General Discussion Forum
Topic: shocks
Replies: 10
Views: 708

Re: shocks

thanks mark i found that one there is one somewhere that shows the fronts
by Philip
Mon Jan 22, 2024 3:15 pm
Forum: General Discussion Forum
Topic: shocks
Replies: 10
Views: 708

Re: shocks

there was a thread on the subject but i have no luck searching anymore
by Philip
Mon Jan 22, 2024 2:53 pm
Forum: General Discussion Forum
Topic: shocks
Replies: 10
Views: 708

shocks

looking for information on putting modern shocks on a model t. what shocks and how to mount.philip
by Philip
Tue Jan 02, 2024 11:14 am
Forum: Classifieds - Parts
Topic: For Sale Complete 1909 Mother-in- Law roadster or will part out
Replies: 2
Views: 674

Re: For Sale Complete 1909 Mother-in- Law roadster or will part out

not that i could buy it but what is the price?
by Philip
Mon Nov 27, 2023 3:28 pm
Forum: General Discussion Forum
Topic: T wire wheels vs. A wire wheels
Replies: 12
Views: 855

Re: T wire wheels vs. A wire wheels

t wires have a smooth hub a wires have little raised things to make them stronger.
the bolt patterns are not the same
by Philip
Mon Nov 27, 2023 2:19 pm
Forum: General Discussion Forum
Topic: 21 inch tires
Replies: 7
Views: 446

Re: 21 inch tires

all aired up all marked 440-450 21
by Philip
Mon Nov 27, 2023 1:56 pm
Forum: General Discussion Forum
Topic: 21 inch tires
Replies: 7
Views: 446

21 inch tires

i recently bought a set of 21 inch wire wheels. the tires are in good shape 440-450-21
the outer dia is 28 inches the ones i have now are 31 outer dia. i have 4 of them i guess
they will look ok any thoughts on why the difference. philip
by Philip
Fri Nov 17, 2023 1:38 pm
Forum: Classifieds - Parts
Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
Replies: 13
Views: 795

Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each

i can do the machining do you have anymore of that metal to sell?
by Philip
Thu Nov 16, 2023 8:35 pm
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

It's all good I will get them straight
by Philip
Thu Nov 16, 2023 8:21 pm
Forum: Classifieds - Parts
Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
Replies: 13
Views: 795

Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each

They look like t wood to a wire did you use them?
by Philip
Thu Nov 16, 2023 7:53 pm
Forum: Classifieds - Parts
Topic: FS Wood Hub to T Wire Wheel Adapters-Only 2 each "SOLD"
Replies: 13
Views: 795

Re: FS Wood Hub to T Wire Wheel Adapters-Only 2 each

I need adaptors to go from t wood wheels to a wire wheels
Just checking your add says t wire wheels
by Philip
Thu Nov 16, 2023 7:50 pm
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

Henry I would have bought them but your add says model t wood to wire
I need model t wood to model a wire
by Philip
Thu Nov 16, 2023 3:06 pm
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

i agree it is not a perfect solution but for now it will hopefully give me round wheels that dont wobble.
by Philip
Thu Nov 16, 2023 3:02 pm
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

if i used t wires i would need t wire hubs or some adapter. i will make my own adapters
by Philip
Thu Nov 16, 2023 1:34 pm
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

i currently have 21 inch wood wheels and the rims are bent and wobbly. new rims are 2000
old ones i find are all bent. i bought 5 28 29 wheels for 500 i think it will improve my ride
quality. philip
by Philip
Thu Nov 16, 2023 8:42 am
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

Re: a wheel adaptors

i have everything but the outside diameter i can wait until i get the wheels but if someone can measure one
i can order the metal. philip
by Philip
Mon Nov 13, 2023 10:46 am
Forum: General Discussion Forum
Topic: a wheel adaptors
Replies: 22
Views: 912

a wheel adaptors

does anyone have a drawing for the adapters to put a wire wheels on t wood hubs.
will aluminum work ? philip
by Philip
Mon Jul 24, 2023 10:57 am
Forum: General Discussion Forum
Topic: bearing clearance
Replies: 13
Views: 3131

Re: bearing clearance

i think i used the green
by Philip
Wed Jul 19, 2023 8:38 pm
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

Thanks les. My question is would I be better of with manual advance with this setup
by Philip
Wed Jul 19, 2023 6:19 am
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

Did you cast the body?
by Philip
Tue Jul 18, 2023 10:17 am
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

yes i have the bracket and a badly worn vega dist. made by jess blker. i bought a new dist.
but i would like to see how jess did the bearing
by Philip
Tue Jul 18, 2023 8:44 am
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

does anyone have any information on these units i have parts but not the bearings
by Philip
Sun Jul 16, 2023 7:16 am
Forum: General Discussion Forum
Topic: DELIMA - MOTOR MISSING on 3 & 4
Replies: 15
Views: 868

Re: DELIMA - MOTOR MISSING on 3 & 4

I have the same issue I think it is weak fire that does not fire the plug under
Compression. I'm going to try a distributor
by Philip
Tue Jul 11, 2023 9:50 am
Forum: Classifieds - Parts
Topic: wanted distributor
Replies: 0
Views: 308

wanted distributor

i am looking fora distributor like texas t parts or langs sells thought i would
ask here first. philip
by Philip
Mon Apr 24, 2023 9:57 am
Forum: General Discussion Forum
Topic: Triple gear bushings melted ???
Replies: 42
Views: 3502

Re: Triple gear bushings melted ???

im with les find the best original gears and bushings with new pins. philip
by Philip
Thu Mar 09, 2023 11:03 am
Forum: General Discussion Forum
Topic: Hardening valve stems!
Replies: 5
Views: 892

Re: Hardening valve stems!

i would rather have the valve wear than the lifter
by Philip
Wed Mar 08, 2023 1:00 pm
Forum: General Discussion Forum
Topic: Where to set float level....
Replies: 4
Views: 731

Re: Where to set float level....

i set mine as high as possible without leaking
by Philip
Sun Feb 12, 2023 11:07 am
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs 400.00

Hubs are sold thanks mtfca
by Philip
Sat Feb 11, 2023 6:19 am
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs 400.00

These hubs work great I have been running mine for years.
by Philip
Wed Feb 08, 2023 6:33 am
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs 400.00

Stop for sale
by Philip
Mon Feb 06, 2023 8:58 am
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs new price

these are for wood wheels
by Philip
Sun Feb 05, 2023 9:52 am
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs

Still for sale
by Philip
Fri Feb 03, 2023 3:35 pm
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

Re: floating hubs

i should add plus shipping. thanks
by Philip
Fri Feb 03, 2023 3:30 pm
Forum: Classifieds - Parts
Topic: floating hubs 400.00
Replies: 9
Views: 1800

floating hubs 400.00

[image][/image]i have a set of floating hubs for sale. they include all of the bolts not pictured and an instruction sheet.
the vendors get about 630.00 i will take 400.00 for the set with all of the bolts. philip
336 212 6927
by Philip
Tue Dec 13, 2022 2:57 pm
Forum: Classifieds - Parts
Topic: WTB spokes
Replies: 1
Views: 456

WTB spokes

i need 24 of the 5\8 tenon and 24 of the .530 tenon spokes for 21 inch steel fellow
wheels. i can get from langs just wanted to see if someone had some they dont need.
philip
by Philip
Tue Dec 13, 2022 2:33 pm
Forum: General Discussion Forum
Topic: new spokes
Replies: 13
Views: 1375

Re: new spokes

our club chapter already has the press and some guys that have done the wheels. philip
by Philip
Tue Dec 13, 2022 11:07 am
Forum: General Discussion Forum
Topic: new spokes
Replies: 13
Views: 1375

new spokes

my 24 touring has 21 inch wood spoke wheels. i need to replace the spokes. the rears have the 5\8 tang
the fronts are hard to measure and i dont want to tear them apart yet it seems reading langs catalog
most us cars had .530 spoke ends. any thoughts
by Philip
Fri Dec 09, 2022 2:22 pm
Forum: Classifieds - Parts
Topic: Set of used .060” pistons (Sold, pending)
Replies: 5
Views: 783

Re: Set of used .060” pistons for sale

i will take them. philip
by Philip
Mon Nov 28, 2022 11:02 am
Forum: General Discussion Forum
Topic: Bent Scat crankshaft
Replies: 60
Views: 7296

Re: Bent Scat crankshaft

it is as good or better than i get when i have them ground. they are too small and flex like crazy.
in your situation i would run it. it is better than what i put in my engine and im driving. philip
by Philip
Mon Oct 24, 2022 11:27 am
Forum: General Discussion Forum
Topic: Valve grinding.
Replies: 10
Views: 1324

Re: Valve grinding.

the new way set you want is their small engine set be sure to order the correct pilot
by Philip
Sat Sep 17, 2022 7:54 pm
Forum: General Discussion Forum
Topic: 1912 commercial roadster top
Replies: 8
Views: 2382

Re: 1912 commercial roadster top

I think Don Ellis has one for sale
by Philip
Tue Sep 06, 2022 3:30 pm
Forum: General Discussion Forum
Topic: How do you obtain a title?
Replies: 16
Views: 1683

Re: How do you obtain a title?

not sure about there but in nc you ban get it inspected and then get a bonded title that is insured for 5 years
then in becomes a regular title.
by Philip
Mon Aug 22, 2022 9:31 pm
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

I think I have one I have to get some pulleys and a belt
by Philip
Mon Aug 22, 2022 8:05 pm
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Re: Need blker. Distributor

I meant jess. Blker.
by Philip
Mon Aug 22, 2022 8:02 pm
Forum: General Discussion Forum
Topic: Need blker. Distributor
Replies: 15
Views: 1758

Need blker. Distributor

If anyone has any info on the jess. blker. Belt drive distributor let me know
by Philip
Thu Aug 18, 2022 8:24 pm
Forum: Classifieds - Parts
Topic: Wtb distributor
Replies: 3
Views: 743

Wtb distributor

Looking for a distributor let me know what you have. Philip
by Philip
Tue Aug 16, 2022 7:42 am
Forum: General Discussion Forum
Topic: Mag questions
Replies: 10
Views: 1328

Re: Mag questions

i would try recharging again with more power. use more batteries
by Philip
Tue Aug 02, 2022 3:50 pm
Forum: Classifieds - Parts
Topic: FS CROSS DRIVE MAGNETO SETUP
Replies: 7
Views: 1243

Re: FS CROSS DRIVE MAGNETO SETUP

mark is it all there? where do the plug wires go?
by Philip
Tue May 31, 2022 1:52 pm
Forum: General Discussion Forum
Topic: Has anyone used either radiator?
Replies: 12
Views: 1952

Re: Has anyone used either radiator?

it usually means it fits but does not look exactly like oe
by Philip
Mon May 09, 2022 7:50 am
Forum: Classifieds - Parts
Topic: tractor conversion help
Replies: 3
Views: 1180

Re: tractor conversion help

that can easily be machined
by Philip
Tue Apr 26, 2022 9:59 am
Forum: General Discussion Forum
Topic: Odd engine number on a 1913
Replies: 23
Views: 2186

Re: Odd engine number on a 1913

what is odd to me is the car was only 2 years old in 13
by Philip
Tue Apr 26, 2022 9:18 am
Forum: General Discussion Forum
Topic: Odd engine number on a 1913
Replies: 23
Views: 2186

Re: Odd engine number on a 1913

i wonder if someone replaced the 11 engine and re stamped it with the old number
by Philip
Tue Apr 26, 2022 9:15 am
Forum: General Discussion Forum
Topic: Odd engine number on a 1913
Replies: 23
Views: 2186

Re: Odd engine number on a 1913

july 11 the number mark is odd
by Philip
Thu Feb 24, 2022 6:00 am
Forum: General Discussion Forum
Topic: Anderson timer
Replies: 18
Views: 2846

Re: Anderson timer

I am currently running the Anderson with coils set on the ecct have good
May on freshly rebuilt engine it runs rough I have a new day on order I will
Report its performance.
by Philip
Tue Feb 22, 2022 7:48 pm
Forum: General Discussion Forum
Topic: Anderson timer
Replies: 18
Views: 2846

Anderson timer

I have read post about bending the contacts in the fall timer to fix between
Cylinder timing. I have also read that the magneto fixes this problem I would
Like to hear some opinions on this philip
by Philip
Thu Feb 17, 2022 6:40 am
Forum: Classifieds - Parts
Topic: engines and motometer
Replies: 8
Views: 1983

Re: engines and motometer

26 engine is sold
by Philip
Wed Feb 16, 2022 2:28 pm
Forum: Classifieds - Parts
Topic: engines and motometer
Replies: 8
Views: 1983

Re: engines and motometer

i think the motometer is sold pending payment
by Philip
Tue Feb 15, 2022 8:30 am
Forum: Classifieds - Parts
Topic: engines and motometer
Replies: 8
Views: 1983

engines and motometer

i have a 26 canadian engine complete out of a running car im sure it needs a rebuild the only thing i took off is the carb. it is wired has fan fan belt timer 4th main hand crank working coils coil box with lid 700.00 pick up or you pay fastenall i have a 1918 us nonstarter block head crank pan and ...
by Philip
Fri Feb 11, 2022 6:36 am
Forum: General Discussion Forum
Topic: Left hand thread vs right hand thread on front hubs
Replies: 44
Views: 5733

Re: Left hand thread vs right hand thread on front hubs

You should stop driving until you understand how spindles work
Any mechanic should be able to help you.
by Philip
Mon Jan 31, 2022 8:13 pm
Forum: General Discussion Forum
Topic: Driveshaft sleeve install
Replies: 21
Views: 2969

Re: Driveshaft sleeve install

I second that do the modern pinion bearing
by Philip
Fri Jan 28, 2022 3:54 pm
Forum: General Discussion Forum
Topic: Another look at trucks
Replies: 28
Views: 2521

Re: Another look at trucks

was that a bobcat on the chain. philip
by Philip
Thu Jan 20, 2022 1:28 pm
Forum: General Discussion Forum
Topic: Looking for tips on going back to natural colored spokes...
Replies: 23
Views: 2745

Re: Looking for tips on going back to natural colored spokes...

i think the paint is whats holding mine together. philip
by Philip
Thu Jan 20, 2022 12:56 pm
Forum: General Discussion Forum
Topic: Rings unavailable
Replies: 15
Views: 2511

Re: Rings unavailable

that is 5\8 thru 86 inches
by Philip
Thu Jan 20, 2022 12:56 pm
Forum: General Discussion Forum
Topic: Rings unavailable
Replies: 15
Views: 2511

Re: Rings unavailable

otto gas engine company says they can supply rings from 5\9 thru 86 inches call him he knows rings. philip
by Philip
Mon Dec 06, 2021 6:31 pm
Forum: General Discussion Forum
Topic: If you have driven in parades...
Replies: 24
Views: 3752

Re: If you have driven in parades...

I drove my 24 touring in late July in not nd 96 degree weather with my bergs .
No can belt no boiling it up eliminates overheating. Philip
by Philip
Mon Dec 06, 2021 6:22 pm
Forum: General Discussion Forum
Topic: Finally in NC - almost
Replies: 8
Views: 2218

Re: Finally in NC - almost

We have a wide area of members I am likely the closest we try to have some Tours in all member areas we to tech or help sessions in the cold months soon request. If yo go ahead and fill out the stuff on the website you will start getting emails letting You know what and where. We have a good group p...
by Philip
Mon Dec 06, 2021 10:36 am
Forum: General Discussion Forum
Topic: Finally in NC - almost
Replies: 8
Views: 2218

Re: Finally in NC - almost

we have a mtfca chapter the tarheel ts if you are interested. information is on our website
. philip
by Philip
Tue Nov 16, 2021 9:54 am
Forum: General Discussion Forum
Topic: Line boring mistake
Replies: 12
Views: 2324

Re: Line boring mistake

if you are using a fixture that clamps to the block like gene french makes you are on center putting
the cutter too far out has made your bores oversize. what did you line bore it with? philip
by Philip
Thu Oct 14, 2021 10:18 am
Forum: General Discussion Forum
Topic: Need Soldering Advice…
Replies: 9
Views: 1739

Re: Need Soldering Advice…

you can solder it but you must tin it with an iron first
by Philip
Tue Sep 21, 2021 8:38 am
Forum: General Discussion Forum
Topic: OLD PHOTO - Happyness Is A Warm Gun
Replies: 5
Views: 1534

Re: OLD PHOTO - Happyness Is A Warm Gun

i would say pheasant of quail going by those setters
by Philip
Thu Sep 16, 2021 3:32 pm
Forum: General Discussion Forum
Topic: Engine noise from freshly rebuilt engine.
Replies: 50
Views: 4583

Re: Engine noise from freshly rebuilt engine.

i also think .004 is a little loose on bearings
by Philip
Thu Sep 16, 2021 11:04 am
Forum: General Discussion Forum
Topic: Engine noise from freshly rebuilt engine.
Replies: 50
Views: 4583

Re: Engine noise from freshly rebuilt engine.

could be piston hitting the head
by Philip
Thu Aug 26, 2021 8:21 am
Forum: General Discussion Forum
Topic: High Compression Heads
Replies: 36
Views: 4215

Re: High Compression Heads

i am running the z head and it works great. i have had no quality or head gasket issues. philip
by Philip
Mon Aug 09, 2021 2:33 pm
Forum: General Discussion Forum
Topic: ethanol question. Any chemist out there?
Replies: 23
Views: 3434

Re: ethanol question. Any chemist out there?

i thought octane is a rating of how much pressure the fuel will withstand before it fires on its own like a diesel.
e84 ethanol fuel is 100 octane at sheets
by Philip
Mon Jul 19, 2021 4:01 pm
Forum: General Discussion Forum
Topic: How to square a valve guide hole to seat?
Replies: 6
Views: 1457

Re: How to square a valve guide hole to seat?

it depends on how bad it is. if off just a little a good piloted valve seat cutter will work.
if it is way off it will need new seats
by Philip
Wed Jul 14, 2021 8:48 am
Forum: General Discussion Forum
Topic: Help...NC DMV issues with registration
Replies: 20
Views: 3242

Re: Help...NC DMV issues with registration

i am also in nc while i had no problem with my t i have a 46 chevy truck that had a title but had not been sent in for many years you have to get the dmv to come inspect it and record the engine number then you get an insurance agent to bond the title. fairly cheap as i recall then if someone pops u...
by Philip
Mon Jun 07, 2021 3:58 pm
Forum: General Discussion Forum
Topic: What year touring ?
Replies: 20
Views: 3018

Re: What year touring ?

i would guess 1918 or so
by Philip
Tue May 18, 2021 10:55 am
Forum: General Discussion Forum
Topic: Hoping to get a centerdoor to go with our touring
Replies: 3
Views: 1136

Re: Hoping to get a centerdoor to go with our touring

there is a guy in our club selling a center door could be the same car joe in wilksboro 828 406 7177
how much is that a in case he doesent trade? philip
by Philip
Tue May 18, 2021 10:49 am
Forum: General Discussion Forum
Topic: Easy Way to Tell if 26 Touring has Floating Rear Hubs?
Replies: 5
Views: 1449

Re: Easy Way to Tell if 26 Touring has Floating Rear Hubs?

you should be able to see the locking screw i put mine inside the grease cup but i would pull
a wheel off that will tell you. philip
by Philip
Tue Apr 06, 2021 2:27 pm
Forum: General Discussion Forum
Topic: Digital Scale For Weighing Engine Parts
Replies: 12
Views: 3545

Re: Digital Scale For Weighing Engine Parts

harbor freight has one it works great about 30.00
by Philip
Tue Apr 06, 2021 8:07 am
Forum: General Discussion Forum
Topic: bearing clearance
Replies: 13
Views: 3131

Re: bearing clearance

i used a self built boring jig. it works good but i dont get the finish that i want.
the timesaver works good. philip
by Philip
Mon Apr 05, 2021 1:43 pm
Forum: General Discussion Forum
Topic: bearing clearance
Replies: 13
Views: 3131

Re: bearing clearance

these are the mains im using plastigauge
by Philip
Mon Apr 05, 2021 9:47 am
Forum: General Discussion Forum
Topic: bearing clearance
Replies: 13
Views: 3131

bearing clearance

setting up my bearing clearance with time saver fresh babbitt reground crank. i have .001 on 1 .001 on 2
ans .0015 on 3 i can turn it with one hand should i let it alone it turns nice. philip
by Philip
Mon Mar 22, 2021 8:26 pm
Forum: General Discussion Forum
Topic: something you don't see anymore
Replies: 4
Views: 1667

Re: something you don't see anymore

You can buy them at hobby lobby but the quality is poor you have a good one. When I do thick
Leather like holsters I mark and still the holes. They have the waxed thread too. Philip
by Philip
Wed Mar 17, 2021 8:05 am
Forum: General Discussion Forum
Topic: 13T - Insufficient Cooling
Replies: 19
Views: 3236

Re: 13T - Insufficient Cooling

i put the same rad. on my 24 and i done even need the fan belt and im in nc where it gets real hot.
i would say you have some issue. philip
by Philip
Thu Feb 11, 2021 2:31 pm
Forum: Classifieds - Parts
Topic: SCAM ALERT!
Replies: 22
Views: 3369

Re: SCAM ALERT!

i use cashiers checks sometimes when i buy parts that i have cash to pay for they are good checks and i fully expect
the seller to cash it before sending parts. would you parts sellers rather have personal checks? philip
by Philip
Wed Feb 10, 2021 2:46 pm
Forum: General Discussion Forum
Topic: mag ring coating
Replies: 17
Views: 2550

Re: mag ring coating

im with you on the welder dan works great once you understand polarity. philip
by Philip
Mon Jan 04, 2021 12:00 pm
Forum: General Discussion Forum
Topic: What other than normal gas, can you run your T on?
Replies: 31
Views: 4403

Re: What other than normal gas, can you run your T on?

everclear is 200 proof white liquor
by Philip
Mon Dec 28, 2020 5:58 am
Forum: General Discussion Forum
Topic: New pistons
Replies: 6
Views: 1712

New pistons

Going to bore my engine for new pistons.It measures .006 over standard will .020
Overs clean up or should I go ahead and get .030 pistons thanks philip