Search found 540 matches
- Mon Mar 11, 2024 4:29 pm
- Forum: Classifieds - Parts
- Topic: Ruckstell 3:25 Ring Gear, Bill Everett
- Replies: 6
- Views: 487
Re: Ruckstell 3:25 Ring Gear, Bill Everett
For a 3.25 gear ratio, a 12 tooth pinion and 39 tooth ring gear are required.
- Thu Mar 07, 2024 6:35 pm
- Forum: General Discussion Forum
- Topic: My 1915 Coupelet
- Replies: 3
- Views: 458
- Sat Mar 02, 2024 12:55 pm
- Forum: General Discussion Forum
- Topic: Tamiami Trailblazers
- Replies: 8
- Views: 513
Re: Tamiami Trailblazers
Brent,
That is a period correct frown.
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Mon Feb 19, 2024 2:14 pm
- Forum: General Discussion Forum
- Topic: Allen HCCT to be Auctioned at MTFCI Cadillac Tour
- Replies: 0
- Views: 304
Allen HCCT to be Auctioned at MTFCI Cadillac Tour
If you ever wanted a HCCT, here is your chance. When we found this HCCT it had been dropped and badly damaged. Jeff Humble, Ron Patterson and I greed we should repair it and donate it to the Model T Ford Club International Youth Foundation Auction that will be conducted at the 2024 MTFCI annual t...
- Thu Feb 15, 2024 10:58 pm
- Forum: General Discussion Forum
- Topic: Profit on each Model T
- Replies: 8
- Views: 850
Re: Profit on each Model T
I seem to recall that I read somewhere that after all was said and done the average net profit on each Model T was about $2.00.
That's $30 million dollars over the 18 year run of the Model T.
Pretty big money for that time.
That's $30 million dollars over the 18 year run of the Model T.
Pretty big money for that time.
- Tue Feb 13, 2024 4:25 pm
- Forum: General Discussion Forum
- Topic: 1919 Magneto only horn/light wiring harness colors?
- Replies: 7
- Views: 387
Re: 1919 Magneto only horn/light wiring harness colors?
Here is the best photo that I have.
- Tue Feb 13, 2024 11:03 am
- Forum: General Discussion Forum
- Topic: 1919 Magneto only horn/light wiring harness colors?
- Replies: 7
- Views: 387
Re: 1919 Magneto only horn/light wiring harness colors?
The "Resistor" that is used on the non-starter Model T is actually an Inductor. It is a coil wound around a laminated core. The inductor acts like a variable resistor that varies with engine RPM (Magneto Frequency). As your key is on the coil box, the inductor would have been mounted on the firewal...
- Fri Feb 09, 2024 7:04 pm
- Forum: General Discussion Forum
- Topic: Glass plate in the coils
- Replies: 2
- Views: 367
Re: Glass plate in the coils
The original paper capacitors have no outer wrapping or insulative covering.
Thus the dielectric strength is only what can be provided by the tar.
The glass acts as an insulation barrier between the capacitor and the high voltage windings.
Thus the dielectric strength is only what can be provided by the tar.
The glass acts as an insulation barrier between the capacitor and the high voltage windings.
- Mon Feb 05, 2024 9:13 pm
- Forum: General Discussion Forum
- Topic: Magneto Field Coil Dimension
- Replies: 3
- Views: 291
Re: Magneto Field Coil Dimension
Dan & Dan,
Thanks for the information.
I laid it out in CAD and it is right on.
Thanks for the information.
I laid it out in CAD and it is right on.
- Mon Feb 05, 2024 4:36 pm
- Forum: General Discussion Forum
- Topic: Magneto Field Coil Dimension
- Replies: 3
- Views: 291
Magneto Field Coil Dimension
Does anyone know the radius (or diameter)
of the mounting bolt circle of the magneto field coil?
If possible I would like to know the dimension from the Ford drawing.
I need to layout the hole pattern for a HCCT spark ring.
Thanks for your help.
of the mounting bolt circle of the magneto field coil?
If possible I would like to know the dimension from the Ford drawing.
I need to layout the hole pattern for a HCCT spark ring.
Thanks for your help.
- Wed Jan 10, 2024 7:47 pm
- Forum: General Discussion Forum
- Topic: Strictly Model T Humor
- Replies: 144
- Views: 38455
Re: Strictly Model T Humor
I instantly thought of Mad Magazine. ![Laughing :lol:](./images/smilies/icon_lol.gif)
Great work.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Great work.
- Sun Jan 07, 2024 9:22 pm
- Forum: General Discussion Forum
- Topic: Chief speedster
- Replies: 15
- Views: 956
Re: Chief speedster
I did some deeper digging. It is not a Chevrolet dealer as I was previously led to believe. I found four photos for Montgomery County Motor Company. It was in fact a Ford dealer. Here is the link to all photos : https://www.loc.gov/pictures/search/?q=Montgomery%20County%20Motor%20Co&co=npco Montg...
- Sun Jan 07, 2024 6:38 pm
- Forum: General Discussion Forum
- Topic: Chief speedster
- Replies: 15
- Views: 956
Re: Chief speedster
Here is the link to the Shorpy original photo with data.
https://www.shorpy.com/node/8692
- Sun Jan 07, 2024 12:52 pm
- Forum: General Discussion Forum
- Topic: Chief speedster
- Replies: 15
- Views: 956
Re: Chief speedster
Photo number nine is actually a Chevrolet dealer.
Montgomery County Motor Company, Rockville, Maryland, circa 1926.
I used this photo under license in the HCCT Handbook.
Notice the long wire cables hanging next to the HCCT that were used to
reach the magneto on a running car to test the output.
Montgomery County Motor Company, Rockville, Maryland, circa 1926.
I used this photo under license in the HCCT Handbook.
Notice the long wire cables hanging next to the HCCT that were used to
reach the magneto on a running car to test the output.
- Sun Dec 31, 2023 1:33 pm
- Forum: General Discussion Forum
- Topic: Weidenhoff HCCT restoration
- Replies: 13
- Views: 1305
Re: Weidenhoff HCCT restoration
Nathen,
Great job.
Weidenhoff HCCTs are quite rare.
She's a beauty !!
Great job.
Weidenhoff HCCTs are quite rare.
She's a beauty !!
- Thu Dec 28, 2023 7:19 pm
- Forum: General Discussion Forum
- Topic: Sanity Check - Triple Gear Pins
- Replies: 6
- Views: 606
Sanity Check - Triple Gear Pins
Triple Gear Pins push out towards the magnets - Right?
- Fri Dec 22, 2023 3:54 pm
- Forum: General Discussion Forum
- Topic: Who else enjoys Christmas lights in a T?
- Replies: 13
- Views: 681
Re: Who else enjoys Christmas lights in a T?
How about 2200 lights and a sound system to play Christmas music as you drive along.
I used to do this every year until the Cops told me I couldn't have flashing blue lights on a moving vehicle.
![Neutral :|](./images/smilies/icon_neutral.gif)
- Sat Dec 16, 2023 6:20 pm
- Forum: General Discussion Forum
- Topic: 2024 Midwinter Clinic
- Replies: 3
- Views: 444
Re: 2024 Midwinter Clinic
Good to see you up and running again.
- Fri Dec 15, 2023 5:48 pm
- Forum: General Discussion Forum
- Topic: Weidenhoff HCCT restoration
- Replies: 13
- Views: 1305
Re: HCCT restoration
Great photos Nathan,
That Weidenhoff is a rare HCCT.
Thanks for posting.
That Weidenhoff is a rare HCCT.
Thanks for posting.
- Tue Dec 12, 2023 4:23 pm
- Forum: OT - Off topic
- Topic: Some Humor to Brighten Your Day II
- Replies: 229
- Views: 18063
Re: Some Humor to Brighten Your Day II
Barn Find !!!
- Fri Dec 08, 2023 2:58 am
- Forum: General Discussion Forum
- Topic: Weidenhoff HCCT restoration
- Replies: 13
- Views: 1305
Re: HCCT restoration
The spark jumps from the handwheel to the plate indicated.
About three sparks are visible at once.
About three sparks are visible at once.
- Thu Dec 07, 2023 9:39 pm
- Forum: General Discussion Forum
- Topic: Weidenhoff HCCT restoration
- Replies: 13
- Views: 1305
Re: HCCT restoration
It is important to maintain a good ground path between the field coil, the frame, the coil and the meter.
Make sure the field coil to frame attach points are clean bare metal.
This is a Weidenhoff HCCT and it has an unusual spark indicator that relies on properly grounded components.
Make sure the field coil to frame attach points are clean bare metal.
This is a Weidenhoff HCCT and it has an unusual spark indicator that relies on properly grounded components.
- Sat Dec 02, 2023 5:21 pm
- Forum: OT - Off topic
- Topic: Some Humor to Brighten Your Day II
- Replies: 229
- Views: 18063
Re: Some Humor to Brighten Your Day II
This might surprise you.
Worst conundrum ever.
- Fri Dec 01, 2023 3:59 pm
- Forum: General Discussion Forum
- Topic: Who is restoring 1911 Heinze coils?
- Replies: 9
- Views: 555
Re: Who is restoring 1911 Heinze coils?
Luke,
Please consider putting an entry in the "Services" forum.
Please consider putting an entry in the "Services" forum.
- Fri Dec 01, 2023 2:29 pm
- Forum: General Discussion Forum
- Topic: Look who I found -Steve Jelf
- Replies: 22
- Views: 2227
Re: Look who I found -Steve Jelf
That can't be Steve Jelf.
His hands aren't greasy and he's not holding a Model T part.
Good to see you again old man.
His hands aren't greasy and he's not holding a Model T part.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Good to see you again old man.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- Wed Nov 29, 2023 3:55 pm
- Forum: General Discussion Forum
- Topic: #1 cylinder running rich
- Replies: 27
- Views: 1114
Re: #1 cylinder running rich
Number one cylinder is right behind the fan so it runs cooler than the rest. Some previous discussions about this. https://www.mtfca.com/discus/messages/29/8298.html?1171848291 https://www.mtfca.com/discus/messages/80257/106721.html?1253843776 https://www.mtfca.com/discus/messages/506218/526034.htm...
- Tue Nov 28, 2023 1:48 pm
- Forum: OT - Off topic
- Topic: IS YOUR WORK YOUR SIGNATURE?
- Replies: 9
- Views: 703
Re: IS YOUR WORK YOUR SIGNATURE?
A Friend used to tell me :
"Perfection is the enemy of good enough"
I wound tell him :
"Good enough, isn 't."
- Sat Nov 25, 2023 6:07 pm
- Forum: General Discussion Forum
- Topic: Another use for reverse gear bushes.
- Replies: 6
- Views: 732
Re: Another use for reverse gear bushes.
I am not aware of any laws concerning tail light height.
The reason that I extended the light below the top cradle
was to make the light visible when the top is folded down.
- Sat Nov 25, 2023 2:29 pm
- Forum: General Discussion Forum
- Topic: Another use for reverse gear bushes.
- Replies: 6
- Views: 732
Re: Another use for reverse gear bushes.
Another use for a reverse bushing.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- Wed Nov 15, 2023 1:56 pm
- Forum: General Discussion Forum
- Topic: KRW gap gauge
- Replies: 27
- Views: 1233
Re: KRW gap gauge
Found this from Ron Patterson.
- Thu Nov 02, 2023 8:47 pm
- Forum: General Discussion Forum
- Topic: Model T's on film
- Replies: 13
- Views: 753
Re: Model T's on film
Frankie Drake Mysteries on TV 2017 - 2021.
Nearly all set vehicles were Model T's.
Nearly all set vehicles were Model T's.
- Fri Oct 27, 2023 3:43 pm
- Forum: General Discussion Forum
- Topic: Model T Bandsaw !!!
- Replies: 1
- Views: 573
Model T Bandsaw !!!
Yet another tool from Model T parts. Saw this on Facebook marketplace. More photos at the link. https://www.facebook.com/marketplace/item/7647363751947626/?ref=category_feed&referral_code=null&referral_story_type=listing&tracking=%7B%22qid%22%3A%22-3188259432143534588%22%2C%22mf_story_key%22%3A%2...
- Fri Oct 27, 2023 7:25 am
- Forum: General Discussion Forum
- Topic: Gas cap thread
- Replies: 4
- Views: 484
Re: Gas cap thread
This is a 10 gallon round gas tank on a '15 Roadster. The mount bands, shape and size of the tank are the same as the tank on my '16 Touring. The cap however, is the same thread as a five gallon "jerry" can. A Jerry can cap fits perfectly. (second photo) Yet another Model T mystery. :lol: IMG_074...
- Thu Oct 19, 2023 5:51 pm
- Forum: Classifieds - Parts
- Topic: Fun Projects Voltage Regulator REPAIR SERVICE
- Replies: 1
- Views: 280
Re: Fun Projects Voltage Regulator REPAIR SERVICE
Add this to the "Services" forum. ![😊](//twemoji.maxcdn.com/2/svg/1f60a.svg)
- Mon Oct 16, 2023 1:34 pm
- Forum: General Discussion Forum
- Topic: 6 Volt Belt Drive Alternator
- Replies: 7
- Views: 470
Re: 6 Volt Belt Drive Alternator
You're welcome kindly ... but it still goes on your tab.
- Mon Oct 16, 2023 12:39 pm
- Forum: General Discussion Forum
- Topic: 6 Volt Belt Drive Alternator
- Replies: 7
- Views: 470
Re: 6 Volt Belt Drive Alternator
Steve, I put one on my '16. It is a GM 10si type. 35 Amp, Grooved Belt. I had to make my own mount bracket. I will look up where I got it today and call you. EDIT : I found it. https://store.alternatorparts.com/7127m-6volt-35amp-10si-series-self-exciting-alternator.aspx?_gl=1*20ma92*_gcl_au*MTA0NjI...
- Fri Oct 13, 2023 10:44 am
- Forum: OT - Off topic
- Topic: a couple members i have not heard from in a long time
- Replies: 5
- Views: 609
Re: a couple members i have not heard from in a long time
I believe Ray Elkins sold his TT and left the Model T hobby quite a number of years ago.
- Tue Sep 12, 2023 2:58 pm
- Forum: General Discussion Forum
- Topic: Cam nut wrench!
- Replies: 40
- Views: 2296
Re: Cam nut wrench!
A Snap-On 36-F socket is the correct tool.
Or one can be made from a front wheel bearing wrench
(cut from a hubcap wrench multi-tool),
a piece of tubing and an old socket.
- Wed Sep 06, 2023 2:26 am
- Forum: General Discussion Forum
- Topic: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
- Replies: 5
- Views: 287
Re: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
Mark G.
Fortunately, Stan Howe worked over this carb before he passed.
I worked with it today and it came down to a small tweak on the main mixture.
I am discovering that this is a lot of carburetor for a four cylinder Model T. !!
- Mon Sep 04, 2023 10:32 pm
- Forum: General Discussion Forum
- Topic: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
- Replies: 5
- Views: 287
Re: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
Also, Thanks to Adam Hubacz for sending me some additional information from the Stromberg Manual.
- Mon Sep 04, 2023 9:53 pm
- Forum: General Discussion Forum
- Topic: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
- Replies: 5
- Views: 287
Re: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
Thanks Mark.
I now have some serious reading to do.
I now have some serious reading to do.
- Mon Sep 04, 2023 8:45 pm
- Forum: General Discussion Forum
- Topic: Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
- Replies: 5
- Views: 287
Anyone Have Adjustment Specs For a Stromberg OC-2 Carburetor
I have a Stromberg OC-2 carb on a Frontenac head.
I have a 19th edition Dykes but it does not specifically cover the OC-2.
It does cover the OS carb which is pretty close.
Any help would be greatly appreciated.
I have a 19th edition Dykes but it does not specifically cover the OC-2.
It does cover the OS carb which is pretty close.
Any help would be greatly appreciated.
- Mon Aug 28, 2023 11:03 pm
- Forum: General Discussion Forum
- Topic: Pinion and ring gear ratios
- Replies: 12
- Views: 1024
Re: Pinion and ring gear ratios
Here are the potential possibilities of gear ratios.
[/size][/b]
- Sat Aug 19, 2023 11:36 am
- Forum: General Discussion Forum
- Topic: *Clayton Paddison is back - Model T update*
- Replies: 11
- Views: 1164
Re: *Clayton Paddison is back - Model T update*
Clayton,
Glad to see you are back.
Bob Cascisa
BPHS '66
Glad to see you are back.
Bob Cascisa
BPHS '66
- Sat Aug 12, 2023 1:41 pm
- Forum: OT - Off topic
- Topic: Tool Time
- Replies: 108
- Views: 10681
Re: Tool Time
It's Italian !!
![Laughing :lol:](./images/smilies/icon_lol.gif)
PBR - Perico Baroni & Raimondi 12" x 40" Lathe.
Made in Italy in 1966.
- Sat Aug 12, 2023 1:08 pm
- Forum: General Discussion Forum
- Topic: Strob-O-Spark on eBay - It's a real Hoot !!
- Replies: 10
- Views: 1050
Re: Strob-O-Spark on eBay - It's a real Hoot !!
As far as "true value" goes, I know of one that just recently sold for $275.
I believe the original price was $350.
I believe the original price was $350.
- Fri Aug 11, 2023 1:14 pm
- Forum: General Discussion Forum
- Topic: Strob-O-Spark on eBay - It's a real Hoot !!
- Replies: 10
- Views: 1050
Strob-O-Spark on eBay - It's a real Hoot !!
Check out this listing for a Fun Projects Strob-O-Spark. After you recover from the sticker shock read the description. https://www.ebay.com/itm/295872901463?hash=item44e3663157%3Ag%3ASBcAAOSwWqNk1aIL&amdata=enc%3AAQAIAAAAwPVWeZsDS2eREm7aVO%2FibR3TvaFZ8E3zul8khqtz3Es5VGBdASzut4E%2Bod36s%2FPMGIodc...
- Wed Aug 09, 2023 1:23 pm
- Forum: General Discussion Forum
- Topic: charging 6 volt and 12 volt batteries with generator
- Replies: 19
- Views: 1108
Re: charging 6 volt and 12 volt batteries with generator
Simply charge the 12 Volt battery from a Magneto Battery trickle charger.
- Sun Jul 30, 2023 7:34 pm
- Forum: General Discussion Forum
- Topic: quick test coils
- Replies: 15
- Views: 821
Re: quick test coils
Here is my version of a coil tester.
It is calibrated to read 1/2 of full scale when it sees 3500 Ohms in the secondary.
I take it to all swap meets.
It is calibrated to read 1/2 of full scale when it sees 3500 Ohms in the secondary.
I take it to all swap meets.
- Sun Jul 09, 2023 7:53 pm
- Forum: General Discussion Forum
- Topic: Straightened a radius rod
- Replies: 3
- Views: 548
Re: Straightened a radius rod
Now that's a genuine "Shade Tree" remedy.
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Sun Jul 09, 2023 3:01 pm
- Forum: General Discussion Forum
- Topic: Pulling a Model T
- Replies: 41
- Views: 2758
Re: Pulling a Model T
Bruce, Check out the link from Scott. The Buddy Wheels work best on a T with 26-27 wire wheels. The wire wheel is removed. The Buddy Wheel adapter is installed in place of the wire wheel. The Buddy Wheel adapter has a stub axel with an independent hub. A road wheel and tire are mounted to the indep...
- Sat Jul 08, 2023 11:33 pm
- Forum: General Discussion Forum
- Topic: Pulling a Model T
- Replies: 41
- Views: 2758
Re: Pulling a Model T
Thanks Scott. ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Sat Jul 08, 2023 9:06 pm
- Forum: General Discussion Forum
- Topic: Pulling a Model T
- Replies: 41
- Views: 2758
Re: Pulling a Model T
A member of the Spokane, WA club has a method of removing the rear wheels and installing a set of "Buddy Wheels." The Buddy Wheels completely isolate the running gear from the road. I don't recall the details but it didn't take him long to swap the wheels. He towed his 26 roadster at freeway speeds...
- Fri Jun 09, 2023 11:20 pm
- Forum: General Discussion Forum
- Topic: T electric horn wiring
- Replies: 5
- Views: 467
Re: T electric horn wiring
Here are some links to color Wiring Schematics and Wire Harness Diagrams. Wiring Schematics https://nebula.wsimg.com/3e10aca08d111520632da506f3714699?AccessKeyId=1992A0A3E731FDB20580&disposition=0&alloworigin=1 Wiring Harness Diagrams https://nebula.wsimg.com/3a0733937917a1b2e81400483eea82f1?Access...
- Sat May 27, 2023 10:11 pm
- Forum: General Discussion Forum
- Topic: glass for ammeter gauge cracked
- Replies: 8
- Views: 679
Re: glass for ammeter gauge cracked
A good source of thin glass is the dollar store. I have found 11 x 16 picture frames with thin glass for $1. That's big enough to give you several chances to get it right. Thrift stores are also a good source of used picture frames with thin glass. Most glass shops do not carry thin glass. I use a ...
- Tue May 23, 2023 3:58 pm
- Forum: OT - Off topic
- Topic: How GPS Really Works (A Plagiarized Parody)
- Replies: 9
- Views: 1001
How GPS Really Works (A Plagiarized Parody)
The following explanation, in simplified terms, is typical of all GPS navigation systems. The GPS navigation system knows where it is at all times. It knows this because it knows where it isn’t. By subtracting where it isn’t from where it is or, where is from where it isn’t (whichever is greater), ...
- Thu May 18, 2023 5:08 pm
- Forum: General Discussion Forum
- Topic: Simpson 55 Volt Meter for Allen HCCT
- Replies: 3
- Views: 457
Re: Simpson 55 Volt Meter for Allen HCCT
I have discussed this with my machinist guy.
We plan to make a batch of these but it won’t be until after the national tour in June.
They would be sculpted to look like an original meter.
The material would be aluminum.
We plan to make a batch of these but it won’t be until after the national tour in June.
They would be sculpted to look like an original meter.
The material would be aluminum.
- Sat Apr 29, 2023 3:28 pm
- Forum: General Discussion Forum
- Topic: Riddle me this Batman!
- Replies: 18
- Views: 1309
Re: Riddle me this Batman!
If all of the rods are within .0015" to .002" go one step further.
Check the main bearing clearances as well.
That was the knock on mine.
The center main seems to wear a little sooner then the front and rear mains.
Check the main bearing clearances as well.
That was the knock on mine.
The center main seems to wear a little sooner then the front and rear mains.
- Sun Apr 23, 2023 4:55 pm
- Forum: General Discussion Forum
- Topic: Old Style Coils VS New Style Coils
- Replies: 29
- Views: 2149
Re: Old Style Coils VS New Style Coils
I made this remote coil adapter for my HCCT.
Now I can make any form of coil fixture and connect to the coil.
I then use the HCCT to test and adjust the parameters of the coil.
Now I can make any form of coil fixture and connect to the coil.
I then use the HCCT to test and adjust the parameters of the coil.
- Sat Apr 15, 2023 8:34 pm
- Forum: General Discussion Forum
- Topic: Sanity Check - Clutch adjustment
- Replies: 9
- Views: 913
Re: Sanity Check - Clutch adjustment
Kerry, That is what I thought. Thanks for the confirmation. Yes the spring is new. Craig, Thanks for the additional information. My Watts is from one or two manufacturers before R.V. I have used Watts clutches for over 30 years with no issues. The reason that this came up at is that I had to replac...
- Fri Apr 14, 2023 10:41 pm
- Forum: General Discussion Forum
- Topic: Sanity Check - Clutch adjustment
- Replies: 9
- Views: 913
Re: Sanity Check - Clutch adjustment
Some additional information :
My transmission was recently rebuilt due to a cracked drum and the fingers were set to 13/16"
I have a Watts clutch.
My transmission was recently rebuilt due to a cracked drum and the fingers were set to 13/16"
I have a Watts clutch.
- Fri Apr 14, 2023 10:38 pm
- Forum: General Discussion Forum
- Topic: Sanity Check - Clutch adjustment
- Replies: 9
- Views: 913
Sanity Check - Clutch adjustment
My clutch is slipping. I have verified the linkage is properly adjusted. I will need to adjust the three fingers on the clutch drive plate. The question I have is, do I turn the screw clockwise as viewed looking forward from the back of the car, or counterclockwise? I only want to do this once. Tha...
- Tue Apr 11, 2023 4:49 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 40
- Views: 3729
- Tue Apr 11, 2023 9:49 am
- Forum: Classifieds - Parts
- Topic: HCCT on Facebook Market Place
- Replies: 4
- Views: 762
Re: HCCT on Facebook Market Place
Looks like a two meter Allen with a brake drum spark ring.
Crank handle seems to be missing.
Meters appear to be there.
Also, it looks like there is an original flywheel magnet shipping box with magnets..
At 350-500 it is worth getting.
Crank handle seems to be missing.
Meters appear to be there.
Also, it looks like there is an original flywheel magnet shipping box with magnets..
At 350-500 it is worth getting.
- Wed Apr 05, 2023 4:11 pm
- Forum: General Discussion Forum
- Topic: Too funny to not share
- Replies: 12
- Views: 1647
Re: Too funny to not share
Ell - One - Kay - Eee
LIKE ++![Laughing :lol:](./images/smilies/icon_lol.gif)
LIKE ++
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Sun Apr 02, 2023 7:02 pm
- Forum: General Discussion Forum
- Topic: Patent Date of the HCCT
- Replies: 6
- Views: 803
Re: Patent Date of the HCCT
The HCCT as we know it today was originally a Ford "Z" tool . The first Ford HCCT was the 17 Z 803. As near as we can determine it was not produced in any great numbers. We suspect (unconfirmed) that it was redesigned into what we know as a HCCT today - the 18 Z 245. I have been told by people that...
- Sun Mar 26, 2023 9:49 pm
- Forum: General Discussion Forum
- Topic: Enclosed Car Trailer Optimal Size
- Replies: 11
- Views: 1106
Re: Enclosed Car Trailer Optimal Size
I found that a 16 foot trailer was ideal for my '16 Touring. 8.5 feet wide is a must in my opinion. A 16 foot trailer leaves about four feet for "Misc. Stuff" to make the trip a success. My trailer had 12" of extra height. I could easily drive my touring into the trailer with the top up. A beaver t...
- Fri Mar 17, 2023 4:55 pm
- Forum: General Discussion Forum
- Topic: Ruckstell Part #?
- Replies: 9
- Views: 981
Re: Ruckstell Part #?
P-140 was the Metric version.
Not really
![Laughing :lol:](./images/smilies/icon_lol.gif)
Not really
- Mon Mar 13, 2023 4:46 pm
- Forum: General Discussion Forum
- Topic: Allen HCCT on eBay
- Replies: 0
- Views: 388
Allen HCCT on eBay
There is an Allen Rotating Spark HCCT on eBay. I have no connection to it. It neeeds restoration. It looks like the parts for the rotating spark indicator are missing. The meter shown is incorrect for a HCCT (as stated by the seller). It is a DC ammeter - the HCCT uses an AC Ammeter. Thst being sai...
- Sun Mar 12, 2023 9:11 pm
- Forum: General Discussion Forum
- Topic: Strobospark
- Replies: 10
- Views: 997
Re: Strobospark
Here is the full PDF.
- Sat Mar 11, 2023 9:48 pm
- Forum: Classifieds - Parts
- Topic: Allen HCCT Meter Mount Plate.
- Replies: 0
- Views: 353
Allen HCCT Meter Mount Plate.
Allen HCCT meter mount plates are now available. I had some cast recently (raw castings shown). These are cast from aluminum. Original ones were cast iron (or steele). Drilled, taped and ready for meters. This part is commonly missing or broken. $55.00 Bob Cascisa RMC Engineering Services LLC 360-6...
- Sat Mar 11, 2023 9:34 pm
- Forum: Services
- Topic: HCCT (Hand Crank Coil Tester) Meter Repair
- Replies: 13
- Views: 4366
Re: HCCT (Hand Crank Coil Tester) Meter Repair
Allen HCCT meter mount plates are now available. I had some cast recently (raw castings shown). These are cast from aluminum. Original ones were cast iron (or steele). This part is commonly missing or broken. Contact me if interested. Bob Cascisa RMC Engineering Services LLC 360-620-3226 bcascisa@c...
- Sat Mar 11, 2023 8:56 pm
- Forum: General Discussion Forum
- Topic: Wiring HCCT
- Replies: 3
- Views: 501
Re: Wiring HCCT
A common source of HCCT problems is a poor ground circuit. Make sure the following items are connected to ground (the HCCT frame). 1. Mag coil ring to HCCT frame. 2. Meter to HCCT frame Below is a Ford HCCT Diagram with the inductor omited. Feel free to contact me if there are any concerns about th...
- Wed Feb 22, 2023 2:20 pm
- Forum: OT - Off topic
- Topic: Glad I don't own a vintage Chevy
- Replies: 8
- Views: 1504
Glad I don't own a vintage Chevy
Vintage Chevy accessories are expensive. https://www.ebay.com/itm/385430830524?hash=item59bd77bdbc%3Ag%3AG28AAOSwZOhj8-vY&amdata=enc%3AAQAHAAAA0LW1R3TNsyx2SJzW9VYXU466%2BCAm4i7yZb9NEBgyhRSOJmKWnso%2B45e7TMTJdjYMFp9ycBt6aO42J6QW0UVCtkAdlhk3%2FJ5I8Y0Aab11wd7IZozaE6tCJAnVK0AxtU7Ia6Bs1K%2Fgw9z27YVzlcA7...
- Sat Feb 11, 2023 1:17 pm
- Forum: General Discussion Forum
- Topic: Ez slider
- Replies: 15
- Views: 1952
Re: Ez slider
The soul of the Model T is the Shade-Tree fabrication used to keep it going.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- Sat Feb 04, 2023 8:42 pm
- Forum: General Discussion Forum
- Topic: LED light issues
- Replies: 25
- Views: 3333
Re: LED light issues
Mack,
These "non-polarized" LED assemblies have an internal bridge rectifier inline with the power leads.
Thus, the LEDs will always see the correct polarity.
These "non-polarized" LED assemblies have an internal bridge rectifier inline with the power leads.
Thus, the LEDs will always see the correct polarity.
- Sat Feb 04, 2023 2:01 pm
- Forum: General Discussion Forum
- Topic: LED light issues
- Replies: 25
- Views: 3333
Re: LED light issues
As stated, the LED bulbs are non-polarized. This means they will work with positive or negative ground. They don't care about polarity by design. I hade an issue of "cross-talk" between my LED brake lights. I solved it by putting a diode in series with each bulb. Don't ask me why - it just worked. ...
- Thu Jan 26, 2023 8:55 pm
- Forum: General Discussion Forum
- Topic: Ez slider
- Replies: 15
- Views: 1952
Re: Ez slider
It's 7.75" overall length
- Mon Jan 23, 2023 8:56 pm
- Forum: General Discussion Forum
- Topic: Did any one get a similar email?
- Replies: 17
- Views: 1626
Re: Did any one get a similar email?
Me got won two.
- Sat Jan 21, 2023 4:33 pm
- Forum: General Discussion Forum
- Topic: How Things Have Changed!
- Replies: 13
- Views: 1331
Re: How Things Have Changed!
With the recent rise of A.I. technology the end is near.
Orwell was off by 100 years.
By 2084 the Orwellian society will be upon us.
I won't be here but my offspring will be the ones to endure it.
Orwell was off by 100 years.
By 2084 the Orwellian society will be upon us.
I won't be here but my offspring will be the ones to endure it.
- Mon Jan 16, 2023 8:52 pm
- Forum: General Discussion Forum
- Topic: Need Intake & Exhaust Valves for a Rajo BBR Head
- Replies: 2
- Views: 494
Re: Need Intake & Exhaust Valves for a Rajo BBR Head
Thanks Kevin. I'll give them a try.
- Mon Jan 16, 2023 7:30 pm
- Forum: General Discussion Forum
- Topic: Need Intake & Exhaust Valves for a Rajo BBR Head
- Replies: 2
- Views: 494
Need Intake & Exhaust Valves for a Rajo BBR Head
I need a source for valves for a Rajo BBR head.
The intake is a 2" diameter head, 5.375" Length.
The Exhaust is a 1.775" head and same length.
Thanks
Anyone know where to get them?
The intake is a 2" diameter head, 5.375" Length.
The Exhaust is a 1.775" head and same length.
Thanks
Anyone know where to get them?
- Fri Jan 13, 2023 5:19 am
- Forum: General Discussion Forum
- Topic: Newish kevlar brake band seemed to swell - car stalled
- Replies: 19
- Views: 1681
Re: Newish kevlar brake band seemed to swell - car stalled
I have had Kevlar swell on me several times.
It was from adjusting them too tight.
It takes patience and several iterations of adjusting to get them setup.
After that they are great.
It was from adjusting them too tight.
It takes patience and several iterations of adjusting to get them setup.
After that they are great.
- Thu Jan 12, 2023 6:54 pm
- Forum: General Discussion Forum
- Topic: Optima 6 volt battery installation
- Replies: 17
- Views: 1537
Re: Optima 6 volt battery installation
I have one in my '16 Touring.
I installed a Model T battery carrier and set it at an angle like others have.
I also put one under the front seat, behind the gas tank on a '15 Roadster.
I installed a Model T battery carrier and set it at an angle like others have.
I also put one under the front seat, behind the gas tank on a '15 Roadster.
- Tue Jan 10, 2023 1:20 am
- Forum: Classifieds - Parts
- Topic: WTB Alen HCCT base
- Replies: 2
- Views: 499
Re: WTB Alen HCCT base
They can be welded.
Here is one I did.
Here is one I did.
- Tue Jan 10, 2023 1:16 am
- Forum: Classifieds - Parts
- Topic: WTB Alen HCCT base
- Replies: 2
- Views: 499
Re: WTB Alen HCCT base
The person that was reproducing them has passed away.
I don't know of anyone that is doing it now.
I don't know of anyone that is doing it now.
- Sun Jan 01, 2023 4:41 pm
- Forum: General Discussion Forum
- Topic: Building a DIY HCCT
- Replies: 34
- Views: 4056
Re: Building a DIY HCCT
Matt,
I see you are using a brake drum for a spark ring.
Allen used a modified brake drum on some of their HCCT's.
They increased the diameter of the inner diameter to avoid the spark
from jumping to the shaft.
Here is the Allen drum.
I see you are using a brake drum for a spark ring.
Allen used a modified brake drum on some of their HCCT's.
They increased the diameter of the inner diameter to avoid the spark
from jumping to the shaft.
Here is the Allen drum.
- Wed Dec 28, 2022 6:59 pm
- Forum: Classifieds - Parts
- Topic: Seeking Allen Electric Hand Cranked Coil Tester
- Replies: 4
- Views: 1019
Re: Seeking Allen Electric Hand Cranked Coil Tester
That looks like the small meter was put in a large meter housing.
- Fri Dec 23, 2022 9:01 pm
- Forum: General Discussion Forum
- Topic: Prus head?
- Replies: 13
- Views: 1546
Re: Prus head?
The Prus head is aluminum.
- Thu Dec 22, 2022 2:04 pm
- Forum: General Discussion Forum
- Topic: Building a DIY HCCT
- Replies: 34
- Views: 4056
Re: Building a DIY HCCT
David,
Nice variation on a motorized HCCT.![Laughing :lol:](./images/smilies/icon_lol.gif)
Nice variation on a motorized HCCT.
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Tue Dec 20, 2022 5:30 pm
- Forum: General Discussion Forum
- Topic: manifold thread repair
- Replies: 10
- Views: 1068
Re: manifold thread repair
I have chased the threads with a die before and sometimes it will improve the threads sufficient for a good seal. It does not fully restore threads. "Braze" might not make a strong long lasting thread. "Weld" would be a better choice. The manifold usually needs two things : 1. Thread repair or rest...
- Tue Dec 20, 2022 2:28 pm
- Forum: General Discussion Forum
- Topic: Building a DIY HCCT
- Replies: 34
- Views: 4056
Re: Building a DIY HCCT
Matt,
Please post as you go.
Please post as you go.
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Mon Dec 19, 2022 7:53 pm
- Forum: General Discussion Forum
- Topic: Malware alert
- Replies: 3
- Views: 723
Re: Malware alert
Anytime any email asks you to confirm ANYTHING - It is a scam.
They usually start out "Dear Customer"
That's because they don't know your name.
They usually start out "Dear Customer"
That's because they don't know your name.
- Mon Dec 19, 2022 3:44 pm
- Forum: Classifieds - Parts
- Topic: WANTED Weston A.C. Ammeter
- Replies: 2
- Views: 569
Re: WANTED Weston A.C. Ammeter
I have several original Weston HCCT ammeters.
360-620-3226
360-620-3226
- Mon Dec 19, 2022 2:18 am
- Forum: General Discussion Forum
- Topic: Great Model T drives of the USA
- Replies: 51
- Views: 5534
Re: Great Model T drives of the USA
Hurricane Ridge, WA.
From Port Angeles, WA (sea level) it's 17.9 miles uphill to the summit 5,242 feet.
Endless switchbacks and blind curves.
The ride down is even more fun.
From Port Angeles, WA (sea level) it's 17.9 miles uphill to the summit 5,242 feet.
Endless switchbacks and blind curves.
The ride down is even more fun.
![Surprised :o](./images/smilies/icon_e_surprised.gif)
- Thu Dec 15, 2022 1:26 pm
- Forum: General Discussion Forum
- Topic: 1923 movie.
- Replies: 34
- Views: 4750
Re: 1923 movie.
Can I have your Autograph ??
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Mon Dec 12, 2022 8:37 pm
- Forum: General Discussion Forum
- Topic: Because Brass
- Replies: 1
- Views: 692
Because Brass
In the 10+ years I have been refurbishing HCCT meters I have accumulated a lot of parts. One version of the Allen HCCT has a small Ammeter and Voltmeter. They are normally all steel (see last photo). In my box of donor meters were some with brass rings. So I decided to assemble a set of brass meter...
- Sat Dec 10, 2022 10:24 pm
- Forum: General Discussion Forum
- Topic: 2003 modelT
- Replies: 9
- Views: 1542
Re: 2003 modelT
The last model T camo off of the Ford assembly line October 23, 1958.
- Mon Dec 05, 2022 1:10 pm
- Forum: General Discussion Forum
- Topic: Molded trunk?
- Replies: 11
- Views: 1314
Re: Molded trunk?
This would be a great opportunity to spin a "creative yarn" on how it was custom made
back in the day for special lady that .... well, you get the idea.
If it runs and drives good, have fun with it.
back in the day for special lady that .... well, you get the idea.
![Laughing :lol:](./images/smilies/icon_lol.gif)
If it runs and drives good, have fun with it.
- Tue Nov 29, 2022 6:00 pm
- Forum: OT - Off topic
- Topic: My daughter Soldering her first pipe.
- Replies: 10
- Views: 1468
Re: My daughter Soldering her first pipe.
I am sure her workmanship is A.S.N. quality. (At-Sa-Nicea)
From another Italian who taught his two daughter to use tools.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
From another Italian who taught his two daughter to use tools.