This is GREAT news! Have been wondering how he's doing--I don't get to the forum often now, maybe when I get a better internet connection!
T'ake care,
David Dewey
Search found 519 matches
- Sun Jan 14, 2024 11:39 pm
- Forum: General Discussion Forum
- Topic: Steve Jelf visit
- Replies: 21
- Views: 2204
- Wed Dec 06, 2023 10:06 pm
- Forum: General Discussion Forum
- Topic: Steve Jelf Facebook Page Update - 12/5/2023
- Replies: 9
- Views: 1588
Re: Steve Jelf Facebook Page Update - 12/5/2023
Wow, we think of Steve almost every day. Why Boise ID? Is there family there? It seems so far from his "old home." OTOH, it's lot closer to me, and I have friends in the area, so maybe I can visit sometime (after winter is over!!).
T'ake care,
David Dewey out in Callifunny.
T'ake care,
David Dewey out in Callifunny.
- Sat Nov 04, 2023 12:11 am
- Forum: General Discussion Forum
- Topic: Model T's on film
- Replies: 13
- Views: 834
Re: Model T's on film
Charge of the Model Ts (I think that's the title)
- Sat Nov 04, 2023 12:08 am
- Forum: General Discussion Forum
- Topic: Gotta see BIG movie coming out this October - lots of Model T's
- Replies: 40
- Views: 2935
Re: Gotta see BIG movie coming out this October - lots of Model T's
Right after my kidney stone surgery I had to use those all the time, and yes, I did think about wearing them for the film, but wasn't certain how "dependable" they would be.
David
David
- Thu Nov 02, 2023 5:21 pm
- Forum: General Discussion Forum
- Topic: Gotta see BIG movie coming out this October - lots of Model T's
- Replies: 40
- Views: 2935
Re: Gotta see BIG movie coming out this October - lots of Model T's
My problem is I usually can't sit for 3 hours without a "necessary room" break! Even if I go just before going in, and avoid liquids before. This happened to me watching "Elvis" so. . . I'd rather see it on the big screen, but I might have to wait for the DVD. Getting older is not always the best th...
- Wed Oct 25, 2023 11:40 pm
- Forum: General Discussion Forum
- Topic: Steve Jelf Update 10/21/2023
- Replies: 19
- Views: 3514
Re: Steve Jelf Update 10/21/2023
Thank you for the update. More prayers going out!
David D.
David D.
- Wed Oct 25, 2023 11:24 pm
- Forum: General Discussion Forum
- Topic: They really ARE still out there!!
- Replies: 4
- Views: 935
They really ARE still out there!!
Lately we have seen a lot of "barn finds" postings that are actually about cars that have been restored, decades ago and have been left in a garage or even a barn, but here's the REAL thing! This September 1915 touring when found had 1929 CA license plates on it. it was (may still be) in a Barn of a...
- Thu Sep 21, 2023 9:02 pm
- Forum: General Discussion Forum
- Topic: Thursday Jelf update is great news
- Replies: 19
- Views: 1307
Re: Thursday Jelf update is great news
Fabulous news!! THE BEST EVER!!!
Hope he got our card.
David Dewey
Hope he got our card.
David Dewey
- Mon Sep 18, 2023 8:05 pm
- Forum: Classifieds - Vehicles
- Topic: FS All original 1914 Model T Touring car
- Replies: 33
- Views: 8482
Re: FS All original 1914 Model T Touring car
That would be blasphemy! Not to say bordering on criminal!!
- Sun Jul 02, 2023 11:31 pm
- Forum: General Discussion Forum
- Topic: Does Stutzman's allow visitors?
- Replies: 4
- Views: 668
Does Stutzman's allow visitors?
We are headed out on a cross-country tour, and will be going to the Age of Steam Roundhouse, which apparently IS 18 minutes away from Stutzman's wheel shop. Doe he allow visitors to "drop in" just to see it?
Thanks!
David Dewey
Thanks!
David Dewey
- Sun Jun 25, 2023 9:59 pm
- Forum: General Discussion Forum
- Topic: Yellowstone 2023
- Replies: 22
- Views: 2160
Re: Yellowstone 2023
Rich, A similar situation with Cave Springs, the new young people have remodeled the modern motel units, including painting over one wall of natural Hemlock (12 feet at the peak, beam ceilings with a dark grey, painted the natural redwood outside a dark green. Then they kicked out all the long term ...
- Sun Jun 25, 2023 6:54 pm
- Forum: General Discussion Forum
- Topic: Yellowstone 2023
- Replies: 22
- Views: 2160
Re: Yellowstone 2023
Yeah Rich, it is a bit of a dissapointment for us too, but you are really only two day's drive away, so we can do another trip sometime--Pennsylvania is many many days away (as is the Henry Ford and the Piquette Plant, both still on our list) so need to have days to spend there! Looking forward to p...
- Sun Jun 25, 2023 1:16 pm
- Forum: General Discussion Forum
- Topic: Not good: a "they don't make like they used to" video.
- Replies: 46
- Views: 3175
Re: Not good: a "they don't make like they used to" video.
But not just one T, apparently 7 nice, restored Ts were destroyed--and this is how he became a millionaire???
Surely there is restitution in the next life. . . . .
T'ake care,
David D.
PS, He may be a millionaire, but he's still an asshole!!
Surely there is restitution in the next life. . . . .
T'ake care,
David D.
PS, He may be a millionaire, but he's still an asshole!!
- Sun Jun 25, 2023 1:11 pm
- Forum: General Discussion Forum
- Topic: Yellowstone 2023
- Replies: 22
- Views: 2160
Re: Yellowstone 2023
Rich, we were hoping to go through your town on our trip around the USA, but there is so much to see back east (Pennsylvania) that we have deleted our Idaho side trip. Maybe another time, as I still want to see Yellowstone!
T'ake care,
David Dewey
T'ake care,
David Dewey
- Sat Jun 24, 2023 9:40 pm
- Forum: General Discussion Forum
- Topic: Not good: a "they don't make like they used to" video.
- Replies: 46
- Views: 3175
Re: Not good: a "they don't make like they used to" video.
You are probably right. sad
- Sat Jun 24, 2023 7:41 pm
- Forum: General Discussion Forum
- Topic: Not good: a "they don't make like they used to" video.
- Replies: 46
- Views: 3175
Re: Not good: a "they don't make like they used to" video.
this guy needs to be in captive rehabilitation, apparently he is only happy destroying stuff. I know, in this country you are allowed to express yourself, but if I had been around when he was filming, it is a good thing I don't own a gun! Wanton destruction of property, even if it is his own.
- Thu Sep 08, 2022 4:02 pm
- Forum: General Discussion Forum
- Topic: My new firewall
- Replies: 8
- Views: 1547
Re: My new firewall
Yep, no stain, just black paint--but the firewall is an oddball thickness to fit into the metal cover over it (hood former), so check that the firewall will fit inside the former (as opposed to the latter. . :D ) Check your hood hinge hole in the former, they are usually egged out--why Henry used su...
- Thu Sep 08, 2022 3:56 pm
- Forum: General Discussion Forum
- Topic: A true story, laughable for its ineptitude.
- Replies: 14
- Views: 2232
Re: A true story, laughable for its ineptitude.
I had a package shipped from "back east" (everything is "back east" to a Californian) by DHL, then it was supposed to be handed off to the U S Postal Service when it got to Union City, CA (about a 4 to 5 hour drive from here) at that point tracking stops, DHL says it was given to USPS, USPS says the...
- Sun Jul 24, 2022 5:04 pm
- Forum: OT - Off topic
- Topic: Replacing wiring on a drill press
- Replies: 4
- Views: 1410
Re: Replacing wiring on a drill press
Robert, I was going to post you here, but I just never got around to it. . . . .
- Sat Jul 23, 2022 6:07 pm
- Forum: OT - Off topic
- Topic: OT - Steam Cars
- Replies: 97
- Views: 24968
Re: OT - Steam Cars
I am so sad to hear of Pat's demise. While I get the Gazette, I missed the obit, now I have to find my issue.
Yes His Blue Roadster was/is an amazing car, so reliable. I believe he had a 30 horse boiler in it, accounting for its great performance.
He will be missed!!
Yes His Blue Roadster was/is an amazing car, so reliable. I believe he had a 30 horse boiler in it, accounting for its great performance.
He will be missed!!
- Sun Jul 10, 2022 11:39 pm
- Forum: General Discussion Forum
- Topic: Milt Webb
- Replies: 13
- Views: 1962
Re: Milt Webb
I just spotted Milt's passing on the CA Auto Museum email, and was going to post it here, but it's already been done. "Uncle Milt" was an institution out here, and he will be sorely missed.
David D.
David D.
- Sun Jun 12, 2022 1:48 pm
- Forum: OT - Off topic
- Topic: Almost 2500 American Soldiers killed on June 6th, 78 years ago D-Day
- Replies: 7
- Views: 1487
Re: Almost 2500 American Soldiers killed on June 6th, 78 years ago D-Day
And on the 10th my Dad, Robert Dewey, landed at Saint Lo. He later served in a resupply depot south of Paris for the duration.
- Sun Jun 12, 2022 1:40 pm
- Forum: General Discussion Forum
- Topic: 1915 vs 1916
- Replies: 20
- Views: 2160
Re: 1915 vs 1916
It is a '16, I have a Dec 10, 1915 and it is a '16, although one of the first million Ts! (probably a few hours before #1,000,000). At that point it can have an aluminum hogs head, but more likely the early cast iron one (there are differences from the later ones, the early ones basically look like ...
- Fri Apr 22, 2022 4:24 pm
- Forum: General Discussion Forum
- Topic: T replacement blocks
- Replies: 16
- Views: 2213
Re: T replacement blocks
A couple of companies made replacement blocks in the T time period. Don't know if their pattern mold lines/marks would be the same as the factory's. And I don't know if any of them included any "improvements" to the Ford cast blocks (more robust bracing, etc.).
- Wed Apr 20, 2022 5:42 pm
- Forum: OT - Off topic
- Topic: California Man Owes 573K For Working On His Own Cars In His Own Yard …
- Replies: 36
- Views: 4447
Re: California Man Owes 573K For Working On His Own Cars In His Own Yard …
That worked. Boy I hope someone with political savvy can get ahold of this story and help the guy, and the other folks that the City of Sacramento has gone after. I'm out in the county, with acreage, but I would be "in a heap o' trouble" if such rules came here! Instead, I have to clear the land for...
- Wed Apr 20, 2022 4:55 pm
- Forum: OT - Off topic
- Topic: California Man Owes 573K For Working On His Own Cars In His Own Yard …
- Replies: 36
- Views: 4447
Re: California Man Owes 573K For Working On His Own Cars In His Own Yard …
That article is behind a paywall. bummer.
- Sat Apr 16, 2022 9:17 pm
- Forum: General Discussion Forum
- Topic: Trying to get finished.
- Replies: 64
- Views: 8009
Re: Trying to get finished.
I would mix a small batch and paint something (unimportant something) with it to see if it dries and sprays well. If it passes that test, then ON WITH THE PAINTING!
- Sun Apr 03, 2022 6:07 pm
- Forum: OT - Off topic
- Topic: Paintings that aren't Model Ts
- Replies: 200
- Views: 55859
Re: Paintings that aren't Model Ts
Hey Rich, you have probably heard this one; How do you spot a streetwalking potato?
Easy, it's the one marked "I-da-ho"
I think we'd have a great time once we get together.
Sometimes working from a photograph is easier than still life! I still think you do an incredibly amazing job!
Easy, it's the one marked "I-da-ho"
I think we'd have a great time once we get together.
Sometimes working from a photograph is easier than still life! I still think you do an incredibly amazing job!
- Sat Apr 02, 2022 9:05 pm
- Forum: General Discussion Forum
- Topic: 23-25 Windshield Channel
- Replies: 11
- Views: 3354
Re: 23-25 Windshield Channel
Sometimes takes me a while to read posts here, the disadvantage of not having reliable internet at home. The Caswell kit I use is the "plug n' plate Brush electroplating system" and my box is marked "Nickel/copper" I have purchased parts and more solution a few time from them as I use it for many di...
- Sat Apr 02, 2022 8:58 pm
- Forum: OT - Off topic
- Topic: Paintings that aren't Model Ts
- Replies: 200
- Views: 55859
Re: Paintings that aren't Model Ts
Rich, that is an amazing painting; it really shows your talent, the reflections are incredible! I hope we get to meet someday soon! No, no travel plans yet, but gee whiz. . .
T'ake care,
David Dewey
T'ake care,
David Dewey
- Fri Apr 01, 2022 2:04 am
- Forum: General Discussion Forum
- Topic: Playin in the shop today...
- Replies: 119
- Views: 25114
Re: Playin in the shop today...
that's good to hear. I have the last (so far) BA in Industrial Arts conferred by CSU, Chico. I went back to college much later in life, and graduated in 1990. Long story, but the simple explanation is that the college has to honor the degree programs in the catalog in use when a student starts at th...
- Sun Mar 13, 2022 5:42 pm
- Forum: OT - Off topic
- Topic: Price of Fuel
- Replies: 72
- Views: 6733
Re: Price of Fuel
I found gas for $1.50 the other day
It was at Taco Bell. . . . .
It was at Taco Bell. . . . .
- Sun Mar 13, 2022 5:37 pm
- Forum: General Discussion Forum
- Topic: Anybody remember J.C. Whitney?
- Replies: 31
- Views: 3527
Re: Anybody remember J.C. Whitney?
I remember leafing through the "modern cars" section of the catalog once and notice on one page they had a "hidden" cell phone antenna that mounted under the car, and the next page they had "Get the cell phone look with our fake cell phone antenna, fits any car!" Hmmm. . . .
- Sun Mar 06, 2022 9:59 pm
- Forum: OT - Off topic
- Topic: Best Carb for Model A?
- Replies: 6
- Views: 1813
Re: Best Carb for Model A?
I think the Zenith(s) are the best choice--if rebuilt properly. Problem is, many repro jets aren't quite right, and some of them leak where they are pressed together--simple solution, solder that joint! Make sure all the passages are clear, and the jet sizes are correct. They are a little fussy abou...
- Sun Mar 06, 2022 9:43 pm
- Forum: General Discussion Forum
- Topic: I Need Help
- Replies: 12
- Views: 2467
Re: I Need Help
I don't like to have silicone anywhere near my shop--it causes all sorts of painting problems!
- Thu Feb 24, 2022 9:12 pm
- Forum: General Discussion Forum
- Topic: Wire Wheel Cracked, Repairable?
- Replies: 30
- Views: 2958
Re: Wire Wheel Cracked, Repairable?
You call that "surface rust"??? Looks like deep pitting to me, maybe out here in Callifunny we have a different description of Surface Rust.
- Mon Feb 21, 2022 9:13 pm
- Forum: OT - Off topic
- Topic: Hip replacement
- Replies: 12
- Views: 2284
Re: Hip replacement
Wow, that was a fast job; my wife had hers done on Jan 26, took her there at 10 am, and we left the next day at about 2 pm, but they had her up and walking about 3 hours after the surgery. She now uses a cane around the house and a four wheeled walker outside, as we live in the country and there isn...
- Mon Feb 21, 2022 4:32 pm
- Forum: General Discussion Forum
- Topic: ball park paint cost???
- Replies: 51
- Views: 5335
Re: ball park paint cost???
I was going to say that it depends on what kind of a fence is around the ball park. . . But seriously, we just had a car accident that damaged the hood and the front plastic bumper cover and the painting cost in the estimate is $2,060 alone! Paint costs are astronomical now, and labor isn't far behi...
- Sun Feb 20, 2022 3:50 pm
- Forum: General Discussion Forum
- Topic: Available parts.
- Replies: 11
- Views: 2082
Re: Available parts.
Well, that last one is not "fair" as they (AFAIK) have never been reproduced. The frustrating thing is when one supplier sells his business to someone else, and then they don't put it into production, or drop the quality. Can't fault the original producer, I am certain that he/she tried to find a re...
- Sun Feb 13, 2022 3:40 pm
- Forum: General Discussion Forum
- Topic: The street value of T parts.
- Replies: 24
- Views: 3633
Re: The street value of T parts.
Some years back (MANY) when we lived in town and I was driving a 79 Toyota with a camper shell, the truck was stolen out of our driveway ;this actually happened three times over a two-year period, but this time the shell was full of T parts, including the back half of my '15 touring body. My truck w...
- Tue Feb 08, 2022 6:29 pm
- Forum: OT - Off topic
- Topic: Close encounters of the third kind
- Replies: 13
- Views: 2638
Re: Close encounters of the third kind
Norman, I remember that road well. Once when I was in grade school we were going to Minden and it was snowing--my memory of this was that it was Easter vacation week--but back then we often had snow around Easter. Anyway, here we were in our station wagon, probably with the 18' travel trailer behind...
- Sun Feb 06, 2022 4:34 am
- Forum: Classifieds - Parts
- Topic: Full Flow Float Valves and Taps - Get them while they're available
- Replies: 11
- Views: 2837
Re: Full Flow Float Valves and Taps - Get ready for tour season
so Scott, why no sales to Califunny? In spite of what our governor wants, we still drive petroleum fueled cars here, although at $4+ a gallon, we don't drive them very far!
- Thu Feb 03, 2022 7:40 pm
- Forum: OT - Off topic
- Topic: Identify this sign
- Replies: 15
- Views: 2786
Re: Identify this sign
I think it's just an arrow in the middle of the sign, could be advertising almost anything "Cold Drinks" maybe.
- Tue Feb 01, 2022 3:39 pm
- Forum: OT - Off topic
- Topic: Close encounters of the third kind
- Replies: 13
- Views: 2638
Re: Close encounters of the third kind
HA! Leave it to you Rich, LOL What I notice are the new(er) trucks with four headlights, and all four are on in low beam, unlike the old quad lights where only two were low beam. Those upper lights are so high up, it just blinds someone in a small car. And yes, folks driving at night with those litt...
- Mon Jan 31, 2022 4:24 pm
- Forum: OT - Off topic
- Topic: Shoeshine, mister ?
- Replies: 13
- Views: 2432
Re: Shoeshine, mister ?
One things for certain, you can shoehorn that car into most any parking spot!
Trouble is, it only wants to turn right, need the other shoe to go left. . . .
Trouble is, it only wants to turn right, need the other shoe to go left. . . .
- Sun Jan 30, 2022 3:27 pm
- Forum: Classifieds - Parts
- Topic: WTB 1925 pickup bed strips
- Replies: 6
- Views: 1360
Re: WTB 1925 pickup bed strips
AAAugh!! You have it backwards: the late strips are flat between the "bumps", the '25 strips are convex. What Larry was probably suggesting is that someone with a long break could probably push up the center of the late strips to look like the early ones. At least I think a brake would be the way to...
- Sun Jan 30, 2022 3:59 am
- Forum: Classifieds - Vehicles
- Topic: FJ - 1930/31 Complete Real Steel Farm Model A Sport Coupe Project Roller In Visalia California
- Replies: 4
- Views: 2251
Re: FJ - 1930/31 Complete Real Steel Farm Model A Sport Coupe Project Roller In Visalia California
Looking back at the photo, the headlight cross bar appears to be the very early version with the built-in license plate mounting. Wish I could see the video, maybe when I'm at a place with good wi-fi and I think about it, I can look at it. There are a number of special parts on the top supports that...
- Sun Jan 30, 2022 3:29 am
- Forum: Classifieds - Vehicles
- Topic: FJ - 1930/31 Complete Real Steel Farm Model A Sport Coupe Project Roller In Visalia California
- Replies: 4
- Views: 2251
Re: FJ - 1930/31 Complete Real Steel Farm Model A Sport Coupe Project Roller In Visalia California
I can't see the video because of my lousy internet connection, but in the photo posted here, I see what appears to be a seam in the splash apron, which would make it an early to mid-1930 car; if it has the ribbed dash with a round speedo, then post June. There were only some 50,000 sport coupes made...
- Sun Jan 23, 2022 2:22 pm
- Forum: General Discussion Forum
- Topic: 25 bed strips
- Replies: 4
- Views: 1241
Re: 25 bed strips
Actually, the authentic 1925 bed strips are not available, they are different than the 26 & on strips. The center recessed area on them is not flat, but convex, and Henry soon realized that put the carriage bolt heads higher than the ribs on either side, making it difficult to slide things in and ou...
- Sat Jan 22, 2022 8:11 pm
- Forum: Classifieds - Vehicles
- Topic: 1926 TT stake bed
- Replies: 23
- Views: 10291
Re: 1926 TT stake bed
Hey Mike, I see you're getting a Dollar General store--those dang'd things are EVERYWHERE!
- Sat Jan 22, 2022 8:09 pm
- Forum: OT - Off topic
- Topic: Model A Taillight lens?
- Replies: 6
- Views: 1785
Re: Model A Taillight lens?
Duo Lamp is a Ford lense, the Stimsonite is the manufacturer. Yep, '32 to (I think) '34.
- Wed Jan 12, 2022 10:48 pm
- Forum: Classifieds - Parts
- Topic: WTB Headlight Reflectors 1923-25
- Replies: 8
- Views: 2012
Re: WTB Headlight Reflectors 1923-25
Chrome reflects about 60%, silver up to 92%; this is why it is illegal in most states to use chrome plated reflectors--but I doubt anyone is enforcing that rule!
- Mon Jan 10, 2022 1:20 am
- Forum: Classifieds - Parts
- Topic: WTB New Copper Head Gasket
- Replies: 22
- Views: 4115
Re: WTB New Copper Head Gasket
The word I have is the only supplier's tooling is worn out, and they are awaiting new or reconditioned tooling. This may take a while!
- Wed Jan 05, 2022 9:08 pm
- Forum: Classifieds - Parts
- Topic: 1921 - 1922 Touring body (Sold)
- Replies: 17
- Views: 3741
Re: For Sale: 1921 - 1922 Touring body Price Reduction
Ooh boy, no pressure, eh?? Hmm PIE. . . .
Honestly don't know where I could put it right now! Wouldn't want that outside, fer sure!
Honestly don't know where I could put it right now! Wouldn't want that outside, fer sure!
- Tue Jan 04, 2022 9:19 pm
- Forum: Classifieds - Parts
- Topic: 1921 - 1922 Touring body (Sold)
- Replies: 17
- Views: 3741
Re: For Sale: 1921 - 1922 Touring body Price Reduction
Northern California, about an hour from my house--it's tempting, but I have too many projects already! Still. . . .
- Tue Jan 04, 2022 6:28 pm
- Forum: General Discussion Forum
- Topic: WHAT HAVE YOU DONE WITH YOUR T IN JANURARY ?
- Replies: 74
- Views: 9286
Re: WHAT HAVE YOU DONE WITH YOUR T IN JANURARY ?
Careful Erik, the dump may try to take your truck too!! Is the snow gone yet>
- Tue Jan 04, 2022 6:23 pm
- Forum: General Discussion Forum
- Topic: 1923 TT restore
- Replies: 52
- Views: 5859
Re: 1923 TT restore
I have the remains of a Perry wood truck bed. Front bottom corrner was an oval brass tag, "Perry" (no Martin) I put that tab in a safe place, so safe, I can't even find it!! Still have the two tiny holes and oval shadow on the wood though. It's amazing that that tag survived this long, as the bed is...
- Sun Jan 02, 2022 2:15 am
- Forum: General Discussion Forum
- Topic: Texas Inspector Threw the Book At Me.
- Replies: 55
- Views: 6782
Re: Texas Inspector Threw the Book At Me.
Sounds like that inspector either doesn't know the regulations, or he needs to be reported to his superiors, you may not be his only victim.
- Sun Jan 02, 2022 2:13 am
- Forum: General Discussion Forum
- Topic: 15-16 hood former?
- Replies: 11
- Views: 2018
Re: 15-16 hood former?
Scott, I agree, RE brazing or even Silver Soldering. Took me a bit to figure out what you were describing--I think you forgot to mention about putting the aluminum rod into a flat piece of aluminum, then slide the tube over the aluminum and then the former, face down onto the aluminum so it sits "sq...
- Sun Jan 02, 2022 12:57 am
- Forum: Classifieds - Vehicles
- Topic: 1926 TT stake bed
- Replies: 23
- Views: 10291
Re: 1926 TT stake bed
Is it buried under snow, or were you below the snow level?
- Sat Jan 01, 2022 3:44 pm
- Forum: General Discussion Forum
- Topic: 15-16 hood former?
- Replies: 11
- Views: 2018
Re: 15-16 hood former?
Steve, first, not that I know of; second, yours shows the typical problem with these, and the one (at least) design flaw of these formers; the hood hinge rod hole. Since it's just a thin piece of metal, the hole is usually worn badly. I plan on adding a short piece of tubing to the hole to give the ...
- Sat Jan 01, 2022 3:48 am
- Forum: General Discussion Forum
- Topic: First Drive of 2022
- Replies: 8
- Views: 1714
Re: First Drive of 2022
So which was louder; the buzzing of the coils, or the chattering of you teeth?
Happy New Years!
Happy New Years!
- Fri Dec 31, 2021 8:38 pm
- Forum: General Discussion Forum
- Topic: WHAT HAVE YOU DONE WITH YOUR MODEL T IN DECEMBER
- Replies: 63
- Views: 8009
Re: WHAT HAVE YOU DONE WITH YOUR MODEL T IN DECEMBER
Steve,
I am surprised that no one mentioned you using the "wrong" hand for the torch. I'm a lefty too. When I'm using a 000 tip, I use wire welding wire as it's smaller than a coat hanger and any other wire I have laying around!
I am surprised that no one mentioned you using the "wrong" hand for the torch. I'm a lefty too. When I'm using a 000 tip, I use wire welding wire as it's smaller than a coat hanger and any other wire I have laying around!
- Fri Dec 31, 2021 2:49 pm
- Forum: General Discussion Forum
- Topic: Top Bow rivets
- Replies: 10
- Views: 1779
Re: Top Bow rivets
The aluminum rivet will react with both the steel and the wood, I would not recommend going that way!
- Thu Dec 30, 2021 8:20 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: 1920s STERLING FIRETRUCK HANDCRANK SIREN-GREAT SHAPE-SUPER LOUD!
- Replies: 2
- Views: 1276
Re: FOR SALE: 1920s STERLING FIRETRUCK HANDCRANK SIREN-GREAT SHAPE-SUPER LOUD!
Yes, they are loud! I have one I cranked up one New Years Eve in my old neighborhood--lots of shady folks around the area. We heard some hootin' and hollerin' and a few shots rang out, then I cranked up this puppy and silence for a few minutes! Apparently I scared at the rascals!
- Wed Dec 29, 2021 10:12 pm
- Forum: Classifieds - Vehicles
- Topic: 1926 Touring Car
- Replies: 3
- Views: 2577
Re: 1926 Touring Car
Price? Looks nice.
- Wed Dec 29, 2021 2:35 pm
- Forum: General Discussion Forum
- Topic: Engine hood not sitting well
- Replies: 7
- Views: 1606
Re: Engine hood leather
I would suggest you get a sharp, thin putty knife and "slip" it under the leather (between hood metal and leather) to free it from the paint and likely rust under the leather. Then slip it under the retaining metal to free it from it and the rust that is likely under there. It won't be easy, but you...
- Wed Dec 29, 2021 1:45 pm
- Forum: General Discussion Forum
- Topic: cost of nickel plating radiator outer shell and headlight buckets
- Replies: 17
- Views: 2456
Re: cost of nickel plating radiator outer shell and headlight buckets
Lots of good information here--I should emphasize that you do NOT want Bright Nickel plating. It is designed to be under chrome, and was developed to reduce the plating steps--it comes out of the tank bright and doesn't need to be polished before the chrome layer goes on. It is also much thinner tha...
- Tue Dec 28, 2021 10:16 pm
- Forum: General Discussion Forum
- Topic: Model T Ford engine model
- Replies: 5
- Views: 1460
Re: Model T Ford engine model
It was proposed to be made by Hawk model company, but AFAIK, it has yet to be produced. RATS!
- Sun Dec 26, 2021 11:09 pm
- Forum: General Discussion Forum
- Topic: Closed cars
- Replies: 14
- Views: 2164
Re: Closed cars
Well, I can't make out the state in that pic, but two of the plates (at least) are 1924 plates, if that helps any!
- Sun Dec 26, 2021 10:25 pm
- Forum: General Discussion Forum
- Topic: OT...But could be useful on some Ts
- Replies: 1
- Views: 967
Re: OT...But could be useful on some Ts
But what if it isn't sh*t falling off, but good parts? Still honk, or just retrieve??
- Sun Dec 26, 2021 2:29 am
- Forum: OT - Off topic
- Topic: SP-4274 over Donner Pass
- Replies: 14
- Views: 2510
Re: SP-4274 over Donner Pass
Brent, Cab-Forwards were not allowed on the Siskiyou line. Tunnel 13 at the summit has quite a crown in it, going from upgrade to downgrade very quickly. If you had a normal level of water in the glass going up the hill, it would dip out of site going down the hill. Lack of water on the crown sheet ...
- Sat Dec 25, 2021 4:43 pm
- Forum: OT - Off topic
- Topic: SP-4274 over Donner Pass
- Replies: 14
- Views: 2510
Re: SP-4274 over Donner Pass
I think you are correct. AFAIK, the cab forwards were used only on the west coast, and I don't think they ran much farther east then Sparks, Nevada. Big engine, requiring large turntable or a wye to turn around. I know they went into Oregon quite often, but don't know how far north they were used. T...
- Sat Dec 25, 2021 1:55 am
- Forum: OT - Off topic
- Topic: SP-4274 over Donner Pass
- Replies: 14
- Views: 2510
Re: SP-4274 over Donner Pass
That is a copy of a commercial video, and while it is a great show, it is posted on U-Tube without permission of the copyright holder, so it will likely be taken down soon. I am just a few years too young to remember these engines! AAUGH! I would love to see the sole remaining Cab Forward restored t...
- Thu Dec 23, 2021 3:26 am
- Forum: Classifieds - Parts
- Topic: USPS issue
- Replies: 33
- Views: 4411
Re: USPS issue
The idea that the Post Office should be a profitable business is folly--the Post Office was created to provide affordable communications among Citizens and Government entities. Ben Franklin never suggested it should be a profitable venture, but one that served the citizens!!
- Thu Dec 23, 2021 3:23 am
- Forum: General Discussion Forum
- Topic: Texas Inspector Threw the Book At Me.
- Replies: 55
- Views: 6782
Re: Texas Inspector Threw the Book At Me.
That's an interesting set of instructions. From reading them NO Model T can pass, First the brake requirement: 20.2Brakes. Every passenger car, truck, bus, school bus, and motorcycle shall be equipped with brakes acting on all wheels except: (the exceptions do not include antique cars, the model T i...
- Thu Dec 23, 2021 3:10 am
- Forum: Classifieds - Parts
- Topic: Battery Box
- Replies: 25
- Views: 4893
Re: Battery Box
I got my box from Larry a bit ago, excellent box, and Larry found a shipping box that it JUST fits inside. Thanks for another great product Larry!
Now if someone had the bucks to make dies and a stamping machine to make the lids, just takes $$$$!
Now if someone had the bucks to make dies and a stamping machine to make the lids, just takes $$$$!
- Thu Dec 23, 2021 2:50 am
- Forum: General Discussion Forum
- Topic: Have You Hank Cranked Both a Model T and Model A?
- Replies: 23
- Views: 2671
Re: Have You Hank Cranked Both a Model T and Model A?
When I was in high school, I couldn't afford a good battery for my A, so I hand cranked it whenever I couldn't find a hill to park on. They are easy to start with the crank--if you turn the gas and the ignition on! (I don't need to explain how I know that). When I drove it to the Long Beach Queen Ma...
- Tue Dec 21, 2021 2:30 pm
- Forum: OT - Off topic
- Topic: war on cash??
- Replies: 38
- Views: 4001
Re: war on cash??
the new 1040BB form has three lines (BB=Balanced Budget);
1) How much did you make?_____
2) How much did you spend? _____
3) Total lines 1 & 2 _______ This is your total tax, make payment to IRS
1) How much did you make?_____
2) How much did you spend? _____
3) Total lines 1 & 2 _______ This is your total tax, make payment to IRS
- Tue Dec 21, 2021 2:43 am
- Forum: General Discussion Forum
- Topic: Opinions on my T search
- Replies: 41
- Views: 3762
Re: Opinions on my T search
Getting back to the question on Phillips head screws on a T. Nope! They weren't commercially available until 1934. Robertson (square head) screws were available in the 1920s and at one time they tried to get US Ford to use them, the Canadians already were. The thinking was to speed up production, th...
- Mon Dec 20, 2021 1:56 pm
- Forum: Classifieds - Parts
- Topic: USPS issue
- Replies: 33
- Views: 4411
Re: USPS issue
Well a few years back I got the bright idea to do toy train repairs mail-order. Fortunately I knew one guy on the east coast who had some engines to be fixed, so he was my "test case" The engines arrived with shipping damage--augh! more work. I sent some back (fixed) using a flat rate express box. T...
- Mon Dec 20, 2021 1:48 pm
- Forum: General Discussion Forum
- Topic: Merry Christmas to all
- Replies: 31
- Views: 4171
Re: Merry Christmas to all
Yes a Merry Christmas from our Garage to yours!
Linda & David Dewey
Linda & David Dewey
- Fri Dec 17, 2021 10:44 pm
- Forum: General Discussion Forum
- Topic: Rebuilt Single stack magneto coil.
- Replies: 22
- Views: 2298
Re: Rebuilt Single stack magneto coil.
Well, your starting bid is more than the current price for one from "the usual suspects" BUT they do require a core first, so. . .
- Mon Dec 13, 2021 2:30 pm
- Forum: General Discussion Forum
- Topic: Choosing a Body Style for CA DMV?
- Replies: 36
- Views: 3787
Re: Choosing a Body Style for CA DMV?
Jeff, One of my long-term projects is a M-P like yours. Mine was a complete car left out to rot. It was on a '26 chassis and there are M-P pieces to mate to the later hood. The guy I got it from wanted to keep the chassis, so I finally found a late chassis (with the bowed front axle even) for it. Bu...
- Mon Dec 13, 2021 1:13 am
- Forum: General Discussion Forum
- Topic: I Need Help!
- Replies: 17
- Views: 2424
Re: I Need Help!
The lock is in a pot metal unit, which often swells a bit, and the wood does too (assuming it is a wood-framed door), so it's really a tight fit in there. Add a couple of layers of paint run behind and aaaaugh! It looks like you have taken out the lock retainer screw, so that's done. You could try t...
- Mon Dec 13, 2021 1:07 am
- Forum: General Discussion Forum
- Topic: Choosing a Body Style for CA DMV?
- Replies: 36
- Views: 3787
Re: Choosing a Body Style for CA DMV?
When I registered my '15 touring we called it a 3 door car, because it is! There was no photo to go by. It is a shame you have started this proceedure, as the title was perfectly good before! Unless the car is stolen, the body style question would not ever come up. You could try for a "Body style ch...
- Mon Dec 13, 2021 12:25 am
- Forum: General Discussion Forum
- Topic: Motor Interchange
- Replies: 16
- Views: 2414
Re: Motor Interchange
Just to the rear of that serial number pad is USUALLY a motor casting date, that can tell you a lot.
- Fri Dec 10, 2021 10:21 pm
- Forum: OT - Off topic
- Topic: Whatzit
- Replies: 12
- Views: 2279
Re: Whatzit
It's a three-jaw lathe chuck mounted on something mounted to a trailer hitch. Yep, it's a shin-kicker!
- Thu Dec 09, 2021 2:14 am
- Forum: General Discussion Forum
- Topic: Back rest wood
- Replies: 11
- Views: 1758
Re: Back rest wood
But Jim's question is about a '27 ROADSTER--completely different animal than a coupe. I haven't looked at an "improved" body, but the earlier ones fastened the upholstery and the light spring back unit to the belt molding wood that the top also attaches to. A much simpler arrangement.
- Tue Dec 07, 2021 1:25 pm
- Forum: General Discussion Forum
- Topic: coolant leakage at radiator hoses
- Replies: 18
- Views: 1988
Re: coolant leakage at radiator hoses
Steve's suggestion is very similar to James' suggestion except Steve suggests doing something so the hose isn't "glued" to the sealant. If you do Jame's suggestion you will have to follow Steve's system of unbolting the inlet & outlet fittings to remove the radiator! Jerry has a very good point to, ...
- Mon Dec 06, 2021 4:35 pm
- Forum: Classifieds - Parts
- Topic: Ford Sale: 1911-16 Firewall Brackets
- Replies: 3
- Views: 1235
Re: Ford Sale: 1911-16 Firewall Brackets
Ed, I am interested in the 11-16 firewall brackets. The system says I'm not allowed to send you an email, so this is the only way I know to ask you !
- Mon Nov 29, 2021 4:40 pm
- Forum: OT - Off topic
- Topic: Saw the Movie Radium Girls
- Replies: 6
- Views: 1892
Re: Saw the Movie Radium Girls
Bob, so you don't like those six shooter revolvers that shoot 20 or more times in the movies?? We were watching a TV series set in Canada, we figured out from various dialog clues that it would be about 1919, but there were Ts from 14-23 and significantly a 27 roadster pickup was used. Then they tal...
- Mon Nov 29, 2021 4:15 pm
- Forum: General Discussion Forum
- Topic: Getting Started in the Hobby
- Replies: 8
- Views: 1890
Re: Getting Started in the Hobby
My '16 Touring qualifies for HCCA because it was made in December of 1915! So there are a few '16 year models that qualify!
- Fri Nov 26, 2021 2:30 pm
- Forum: OT - Off topic
- Topic: player piano self playing piano
- Replies: 7
- Views: 2155
Re: player piano self playing piano
Hmm, I didn't get back here very quickly, did I--I could blame it on Covid, but it's really my lousy dial-up internet connection! Yes, my internet is like a Model T! Well, there are probably some nice rolls in there. Connerized are usually good arrangements, Scott Joplin recorded some of those rolls...
- Fri Nov 26, 2021 2:07 pm
- Forum: Classifieds - Vehicles
- Topic: 1929 Model A for sale
- Replies: 16
- Views: 5645
Re: 1929 Model A for sale
I would suspect the wood is fine by looking at the fit of the doors, and the lack of rubs on the door sills. I notice in these additional pictures that the door pulls are the separate Nickeled or Butler finished die-cast kind. If the window trim frames haven't been replaced, that would also indicate...
- Thu Nov 25, 2021 3:03 pm
- Forum: Classifieds - Parts
- Topic: Battery Box
- Replies: 25
- Views: 4893
Re: Battery Box
I recently had some player piano bellow cloth shipped to me--the cloth cost me $120, and the shipping was a bit over $64!! They used FedEx ground, which I hear is one of the more expensive shippers. No, I didn't have a choice in shippers. Thank you Larry for doing this!
- Wed Nov 24, 2021 2:48 am
- Forum: OT - Off topic
- Topic: FJ - You Can Get Anything You Want …. (Cept Alice) …
- Replies: 14
- Views: 2196
Re: FJ - You Can Get Anything You Want …. (Cept Alice) …
It sure is refreshing to find other who remember "Alice's Restaurant" as I make reference to it once in a while and usually get blank "deer in the headlights" stares. The good old Group W bench and the 8 x 10 glossies. :) I used to know the whole thing, but have forgotten much, I don't think I have ...
- Wed Nov 24, 2021 2:44 am
- Forum: OT - Off topic
- Topic: 58 years ago today
- Replies: 10
- Views: 2179
Re: 58 years ago today
I too was in 4th grade when someone came to the classroom door and made the announcement (the school was built in 1926, no PA system); we went home early, and my mom was watching TV--which was never on during the day. I remember we were worried that the Russians might take advantage of the situation...
- Mon Nov 15, 2021 3:50 am
- Forum: Classifieds - Vehicles
- Topic: 1929 Model A for sale
- Replies: 16
- Views: 5645
Re: 1929 Model A for sale
This is a fairly uncommon Briggs Bodied "leatherback" Standard Fordor sedan; not many of the Fordors were made without quarter windows, and even fewer with the Leatherette covered rear section. The lack of a cowl band indicates this was a standard model, as the Deluxe version had the cowl band, and ...
- Fri Nov 12, 2021 8:33 pm
- Forum: OT - Off topic
- Topic: player piano self playing piano
- Replies: 7
- Views: 2155
Re: player piano self playing piano
Ps If you want to hear some player pianos, I have two recordings on my Facebook page, and there are LOTS on U-tube.