Search found 1057 matches
- Thu Apr 18, 2024 5:19 pm
- Forum: Classifieds - Parts
- Topic: Engine Block Needed
- Replies: 7
- Views: 311
Re: Engine Block Needed
I am with Dan, they just do not leak in that area unless head gasket or soft plug.
- Tue Apr 09, 2024 9:58 pm
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 80
- Views: 6808
Re: You tell me
You have been busy since i was there a couple weeks ago, you will be touring with it this summer the rate you are going!
- Tue Apr 09, 2024 7:26 am
- Forum: Classifieds - Parts
- Topic: Looking for right rear fender for 1912/3 Metz any leads would be appreciated
- Replies: 3
- Views: 271
Re: Looking for right rear fender for 1912/3 Metz any leads would be appreciated
It took me two years to finish a 16 Metz engine, parts are really tuff to find,
- Wed Apr 03, 2024 7:22 am
- Forum: General Discussion Forum
- Topic: a question of horse power
- Replies: 20
- Views: 1055
Re: a question of horse power
I tried different things on a dyno, there is a lot of variables here you are asking, the cheapest bang for the buck is High compression pistons, you can get more power other ways but cost you more.
- Thu Mar 28, 2024 7:40 am
- Forum: Classifieds - Parts
- Topic: Dome light switch WTB
- Replies: 6
- Views: 378
Re: Dome light switch WTB
eric that is the one I have in mine!
- Tue Mar 26, 2024 10:03 pm
- Forum: General Discussion Forum
- Topic: Finally got windows.
- Replies: 12
- Views: 1130
Re: Finally got windows.
Can not wait to see this in person!
- Tue Mar 26, 2024 3:18 pm
- Forum: General Discussion Forum
- Topic: That’s a carload!
- Replies: 12
- Views: 1177
Re: That’s a carload!
Have power, will travel!
- Sun Mar 24, 2024 5:10 pm
- Forum: Classifieds - Parts
- Topic: WTB: Early Wishbone
- Replies: 3
- Views: 313
Re: WTB: Early Wishbone
I may have one up in the barn Tiffin Ohio
- Thu Mar 21, 2024 10:21 pm
- Forum: General Discussion Forum
- Topic: Warped manifold
- Replies: 8
- Views: 720
Re: Warped manifold
You can straighten them with out breaking them, just time and heat, and weight of wrench if you rush it , it will break!
- Thu Mar 14, 2024 3:36 pm
- Forum: Classifieds - Parts
- Topic: WTB crankshaft
- Replies: 6
- Views: 738
Re: WTB crankshaft
I also have a couple already ground if still looking.
- Thu Mar 14, 2024 7:53 am
- Forum: General Discussion Forum
- Topic: 1912 Length of horn conduit?
- Replies: 16
- Views: 588
Re: 1912 Length of horn conduit?
My original 12 shows the horn on the inside, firewall is drilled and the mounting holes on door are on inside, never been restored.
- Wed Mar 13, 2024 7:57 pm
- Forum: Classifieds - Parts
- Topic: 26-7 horn bracket
- Replies: 3
- Views: 311
Re: 26-7 horn bracket
I have found one locally, thanks.
- Tue Mar 12, 2024 7:31 am
- Forum: Classifieds - Parts
- Topic: WTB crankshaft
- Replies: 6
- Views: 738
Re: WTB crankshaft
I have at least thirty to pick from, come take a look and measure them.
- Mon Mar 11, 2024 10:54 am
- Forum: General Discussion Forum
- Topic: 26 4dor dome light
- Replies: 8
- Views: 430
Re: 26 4dor dome light
Dan, that switch reminds me of years ago, needed one for my Fordor, saw one on ebay, got in a bidding war, paid 110. dollars for it next day close friend was telling me of this asshole that bidded him up on a switch, but did we have a good laugh on that one!
- Mon Mar 11, 2024 9:33 am
- Forum: General Discussion Forum
- Topic: 26 4dor dome light
- Replies: 8
- Views: 430
Re: 26 4dor dome light
Joe Bell found one in his T collection!
- Mon Mar 11, 2024 9:13 am
- Forum: Classifieds - Parts
- Topic: WTB dash light 26
- Replies: 3
- Views: 243
Re: WTB dash light 26
I may have found one of them also, give me a jingle and will send you pictures.
- Sun Mar 10, 2024 1:45 pm
- Forum: Classifieds - Parts
- Topic: 26-7 horn bracket
- Replies: 3
- Views: 311
26-7 horn bracket
Looking for a 26-7 horn bracket, I know repops are out there but would like an original. Thanks Joe
- Sat Mar 09, 2024 4:14 pm
- Forum: Classifieds - Parts
- Topic: 25-7 rear doors for a Fordor
- Replies: 2
- Views: 237
Re: 25-7 rear doors for a Fordor
I did not see BUDD, the front doors that came with this set had BUDD on them is it possible the rears where not stamped?
- Thu Mar 07, 2024 7:40 pm
- Forum: Classifieds - Parts
- Topic: 25-7 rear doors for a Fordor
- Replies: 0
- Views: 170
25-7 rear doors for a Fordor
I have both all steel doors for the rear of a Fordor no glass or hardware in the , no rust, for got they where up in the barn, need to find a new home.419-618-1025 would make a heck of a deal to some one.
- Thu Mar 07, 2024 7:39 pm
- Forum: Classifieds - Parts
- Topic: 25-7 rear doors for a Fordor
- Replies: 2
- Views: 237
25-7 rear doors for a Fordor
I have both all steel doors for the rear of a Fordor no glass or hardware in the , no rust, for got they where up in the barn, need to find a new home.419-618-1025 would make a heck of a deal to some one.
- Wed Mar 06, 2024 9:59 am
- Forum: General Discussion Forum
- Topic: Question on clutch discs
- Replies: 2
- Views: 261
Re: Question on clutch discs
I am with John on this one, have seen drums where people have tried to do this and the hardened shoes have came loose and going through the engine shorting field coil and breaking brass magnet clamp screws off.
- Sat Mar 02, 2024 3:31 pm
- Forum: General Discussion Forum
- Topic: Need help re broken piece
- Replies: 18
- Views: 1200
Re: Need help re broken piece
Why not epoxy it back together give it some extra coats and use it for a pattern to machine some new ones? I have a local foundry that enjoys making things for me from all the old broken T iron I give them.
- Tue Feb 27, 2024 1:31 pm
- Forum: General Discussion Forum
- Topic: Strange Transmission Brake band material
- Replies: 14
- Views: 988
Re: Strange Transmission Brake band material
The brass pieces in there are never good on the babbitt bearings have seen the mess before.
- Mon Feb 26, 2024 9:50 pm
- Forum: General Discussion Forum
- Topic: Down Draft Intake Manifold Info
- Replies: 8
- Views: 817
Re: Down Draft Intake Manifold Info
Wish I found it , zoom zoom!
- Mon Feb 26, 2024 6:12 pm
- Forum: General Discussion Forum
- Topic: Which steering column is 1916?
- Replies: 10
- Views: 705
Re: Which steering column is 1916?
I thought the 16 had flattened out throttle and spark arms like the earlier ones?
- Mon Feb 26, 2024 7:05 am
- Forum: General Discussion Forum
- Topic: We lost another one
- Replies: 2
- Views: 750
Re: We lost another one
Met Bob on the Ohio Jamboree, sure loved the T's will miss seeing him.
- Sun Feb 25, 2024 12:00 pm
- Forum: General Discussion Forum
- Topic: Marietta swap meet fender hunting
- Replies: 3
- Views: 392
Re: Marietta swap meet fender hunting
I think he is after headlight bar mounted, just talked to him friday.
- Fri Feb 23, 2024 3:39 pm
- Forum: General Discussion Forum
- Topic: Vent whatchamacallit
- Replies: 4
- Views: 438
Re: Vent whatchamacallit
I lasered out a couple extra of the steer step bracket if that is what you are looking for from my 24 coupe. 419-618-1025 Joe Bell Tiffin Ohio
- Wed Feb 21, 2024 9:50 pm
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 80
- Views: 6808
Re: You tell me
Looks better than the last time i saw it! Nice work on the sheetmetal, who did it? just joking!
- Thu Feb 15, 2024 8:06 pm
- Forum: General Discussion Forum
- Topic: Turbo 400 Clutch Discs
- Replies: 29
- Views: 1831
Re: Turbo 400 Clutch Discs
I have replaced many of these after market clutches, if you drive them right they will last but if you slip them then your asking for trouble, to me the big issue is if and when they fail they are deep in the engine and it has to come out to replace, I have never seen original ones fail!
- Fri Feb 09, 2024 4:23 pm
- Forum: Classifieds - Parts
- Topic: WTB: Vaporizer for 27
- Replies: 7
- Views: 519
Re: WTB: Vaporizer for 27
How many you want!
- Thu Feb 08, 2024 2:04 pm
- Forum: Classifieds - Parts
- Topic: FS: Reduced Price ! Straight Cut ‘Spur’ Crank and Cam Gears
- Replies: 2
- Views: 529
Re: FS: Straight Cut ‘Spur’ Crank and Cam Gears
Looks like nice set!
- Thu Feb 08, 2024 2:03 pm
- Forum: Classifieds - Parts
- Topic: WTB older black side mirrors
- Replies: 5
- Views: 494
Re: WTB older black side mirrors
I think there is one old round one that has the two screws to support it.
- Thu Feb 08, 2024 2:02 pm
- Forum: Classifieds - Parts
- Topic: WTB clear lens panel 1913-1914 John Brown 115 tail light
- Replies: 2
- Views: 322
Re: WTB clear lens panel 1913-1914 John Brown 115 tail light
I think I have an original
- Mon Feb 05, 2024 7:00 pm
- Forum: Classifieds - Parts
- Topic: Door trim
- Replies: 6
- Views: 583
Re: Door trim
That front windshield trim for adjusting the front window is really hard to come by, I had to make one years back.
- Tue Jan 30, 2024 4:37 pm
- Forum: General Discussion Forum
- Topic: Restoring a KR Wilson transmission fixture
- Replies: 7
- Views: 781
Re: Restoring a KR Wison transmission fixture
When I first picked up mine, it was just for show and tell then one day decided to try it and now it gets used a bunch, do you have the triple gear attachment? I have one extra.
- Fri Jan 26, 2024 4:25 pm
- Forum: General Discussion Forum
- Topic: T Roadster on Hagerty auction question
- Replies: 10
- Views: 931
Re: T Roadster on Hagerty auction question
Dan, That was larry Hengenius's car and it did have a door from factory.
- Wed Jan 24, 2024 4:08 pm
- Forum: Classifieds - Parts
- Topic: FS Window regulator
- Replies: 1
- Views: 169
Re: FS Window regulator
what a steal!
- Tue Jan 23, 2024 10:32 am
- Forum: Classifieds - Parts
- Topic: Wanted to Buy…..oil breather
- Replies: 4
- Views: 467
Re: Wanted to Buy…..oil breather
I found it ,get a hold of me off line so we can talk. Joe
- Mon Jan 22, 2024 10:25 pm
- Forum: Classifieds - Parts
- Topic: Wanted to Buy…..oil breather
- Replies: 4
- Views: 467
Re: Wanted to Buy…..oil breather
I think I do
- Fri Jan 19, 2024 5:14 pm
- Forum: General Discussion Forum
- Topic: Pan Straightening Jig for sale on Facebook Marketplace in Ohio
- Replies: 17
- Views: 1134
Re: Pan Straightening Jig for sale on Facebook Marketplace in Ohio
I am glad Jim got it!
- Sat Jan 13, 2024 9:36 pm
- Forum: General Discussion Forum
- Topic: A Loose Crankshaft Front Pulley
- Replies: 22
- Views: 1186
Re: A Loose Crankshaft Front Pulley
I use an old drill bushing, press it on it down sizes it then pop it back off.
- Thu Jan 11, 2024 7:58 am
- Forum: Classifieds - Parts
- Topic: FS Original 1912-1913 Nonpareil Brass Horn
- Replies: 17
- Views: 1502
Re: FS Original 1912-1913 Nonpareil Brass Horn
Thanks Lesson learned
- Wed Jan 10, 2024 9:49 pm
- Forum: Classifieds - Parts
- Topic: FS Original 1912-1913 Nonpareil Brass Horn
- Replies: 17
- Views: 1502
Re: FS Original 1912-1913 Nonpareil Brass Horn
12 would of been a double.
- Sun Jan 07, 2024 9:27 pm
- Forum: Classifieds - Parts
- Topic: Diff Carrier w Ring Gear & Pinion FS
- Replies: 13
- Views: 1069
Re: Diff Carrier w Ring Gear & Pinion FS
Dan, I will be tearing a rear axle apart the end of week and may need them.
- Mon Jan 01, 2024 9:07 am
- Forum: Classifieds - Parts
- Topic: A Starter Ring Gear Problem
- Replies: 8
- Views: 479
Re: A Starter Ring Gear Problem
It has been a while since those ring gears where made, remember them well making sure you got the screws to match them.
- Sat Dec 30, 2023 9:44 am
- Forum: Classifieds - Parts
- Topic: Diff Carrier w Ring Gear & Pinion FS
- Replies: 13
- Views: 1069
Re: Diff Carrier w Ring Gear & Pinion FS
can not believe that has not sold yet? I would run them in a heart beat!
- Fri Dec 29, 2023 9:01 am
- Forum: General Discussion Forum
- Topic: Ruckstell axle, can it do what a "T" can't
- Replies: 17
- Views: 956
Re: Ruckstell axle, can it do what a "T" can't
The part I like the best is turning a corner in town, drop a gear and it is just what you need for a heavy car.
- Wed Dec 27, 2023 6:53 pm
- Forum: General Discussion Forum
- Topic: High Volume Oil Line (HVOL) question.
- Replies: 24
- Views: 1140
Re: High Volume Oil Line (HVOL) question.
I may have a couple in a cabinet in the barn, never use them, figure more chances of something falling off and going through the engine.
- Tue Dec 26, 2023 10:00 pm
- Forum: General Discussion Forum
- Topic: Engine Casting Mark VS Engine Serial Number
- Replies: 14
- Views: 816
Re: Engine Casting Mark VS Engine Serial Number
For instance the early 09-10 blocks have three casting dots on the inside and the rear web is really thin.
- Tue Dec 26, 2023 9:59 pm
- Forum: General Discussion Forum
- Topic: Engine Casting Mark VS Engine Serial Number
- Replies: 14
- Views: 816
Re: Engine Casting Mark VS Engine Serial Number
I have seen all kinds out there, some cars that think they are a special one and the block is not correct for the year, Ford changed the blocks so many times through production and if you do not know the difference on the outside or inside most never know.
- Tue Dec 26, 2023 9:53 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Hassler Pancakes for Rear
- Replies: 3
- Views: 456
Re: For Sale: Hassler Pancakes for Rear
A few years back they where going for 400. and now not even 150? That is a shame!
- Mon Dec 25, 2023 10:42 pm
- Forum: General Discussion Forum
- Topic: Best home cleaning method for large parts?
- Replies: 7
- Views: 916
Re: Best home cleaning method for large parts?
do you have the attachment to bore the triple gears? they are always gone.
- Mon Dec 25, 2023 5:01 pm
- Forum: General Discussion Forum
- Topic: Who has a Kelsey Felloe?
- Replies: 12
- Views: 686
Re: Who has a Kelsey Felloe?
The lugs I have and nuts are flat? yours are beveled?
- Sat Dec 23, 2023 6:44 pm
- Forum: Classifieds - Parts
- Topic: WTB Side Curtain Rods for 26 Touring
- Replies: 3
- Views: 220
Re: WTB Side Curtain Rods for 26 Touring
I just found three in the barn two longer than the other?
- Sat Dec 23, 2023 6:42 pm
- Forum: Classifieds - Parts
- Topic: WTB: Straight Rebuildable 26-27 coilbox with lid.
- Replies: 3
- Views: 281
Re: WTB: Straight Rebuildable 26-27 coilbox with lid.
I have several 26-7 boxes you are welcome to but no lids.
- Fri Dec 22, 2023 5:22 pm
- Forum: General Discussion Forum
- Topic: What Oil Should I Use in My Fip Top Oilers?
- Replies: 16
- Views: 943
Re: What Oil Should I Use in My Fip Top Oilers?
Chainsaw bar oil, nice and sticky.
- Thu Dec 21, 2023 9:36 pm
- Forum: General Discussion Forum
- Topic: Removal of an Engine With an Aluminum Head
- Replies: 15
- Views: 1003
Re: Removal of an Engine With an Aluminum Head
It use to scare me to do that till a friend Mike Parker said if it will not hold it should not not a plug then! So I have been lifting them ever since!
- Tue Dec 19, 2023 9:40 pm
- Forum: General Discussion Forum
- Topic: I am putting a starter on my 1916 coupelet.
- Replies: 11
- Views: 812
Re: I am putting a starter on my 1916 coupelet.
There is never any fun on stalling one in a busy intersection, almost every engine I rebuild gets a ring gear in it if not for now but future use! I try to tell people with early cars some day we are going to get older and the car with the starter on it will get used instead!
- Fri Dec 15, 2023 7:02 am
- Forum: Classifieds - Parts
- Topic: 3017B Timing Gear Cover plate FS
- Replies: 10
- Views: 724
Re: 3017B Timing Gear Cover plate FS
rare item these days!
- Wed Dec 06, 2023 5:25 pm
- Forum: Classifieds - Parts
- Topic: WANTED 1923 ENGINE BLOCK
- Replies: 13
- Views: 962
Re: WANTED 1923 ENGINE BLOCK
I Have serial numbers that came off of blocks before they went to the foundry, you can stamp them on your block, free!
- Wed Dec 06, 2023 7:40 am
- Forum: Classifieds - Parts
- Topic: WANTED 1923 ENGINE BLOCK
- Replies: 13
- Views: 962
Re: WANTED 1923 Ford Title.
Some States is a whole lot harder to get one than others, Ohio you stole it till proved other ways and that is expensive!
- Tue Dec 05, 2023 9:48 pm
- Forum: Classifieds - Parts
- Topic: Needed pieces.
- Replies: 5
- Views: 799
Re: Needed pieces.
Tom, I have coffee cans of bearings and original thrust washer and some brass ones. Remind me the next time we see each other.
- Sun Dec 03, 2023 9:01 pm
- Forum: Classifieds - Parts
- Topic: Wanted: Exhaust Cutout for an Early Minerva Three-Tube Whistle
- Replies: 3
- Views: 360
- Sun Dec 03, 2023 4:40 pm
- Forum: Classifieds - Parts
- Topic: Wanted: Exhaust Cutout for an Early Minerva Three-Tube Whistle
- Replies: 3
- Views: 360
Re: Wanted: Exhaust Cutout for an Early Minerva Three-Tube Whistle
I have a couple different styles. Tiffin Ohio
- Wed Nov 29, 2023 10:43 am
- Forum: Classifieds - Parts
- Topic: WTB: aftermarket T head
- Replies: 20
- Views: 1487
Re: WTB: aftermarket T head
I have an AC on my car, have ran it for years, love the looks since no one knows it is high compression.
- Sun Nov 26, 2023 8:36 am
- Forum: Classifieds - Parts
- Topic: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
- Replies: 5
- Views: 525
Re: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
The one I have is the aluminum one for std. size tail shaft.
- Sat Nov 25, 2023 5:26 pm
- Forum: Classifieds - Parts
- Topic: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
- Replies: 5
- Views: 525
Re: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
I may have a used one on the shelf in the barn will have to look tomorrow
- Fri Nov 24, 2023 2:10 pm
- Forum: Classifieds - Parts
- Topic: WTB: aftermarket T head
- Replies: 20
- Views: 1487
Re: WTB: aftermarket T head
Tom Rootlieb had an early Reader head he was wanting to part with when I saw him wednesday.
- Sun Nov 19, 2023 8:29 pm
- Forum: General Discussion Forum
- Topic: Silicon head gasket questions
- Replies: 16
- Views: 1132
Re: Silicon head gasket questions
I have one hanging on a nail in the barn to show where the seal let loose.
- Sun Nov 19, 2023 7:20 am
- Forum: General Discussion Forum
- Topic: Loaded up
- Replies: 5
- Views: 802
Re: Loaded up
Can't wait to see it next week.
- Fri Nov 10, 2023 2:33 pm
- Forum: General Discussion Forum
- Topic: accessori fender brace?
- Replies: 7
- Views: 463
Re: accessori fender brace?
I know Bill Lucius had one at hershey, 419 -595-2310 it was a new one.
- Tue Oct 24, 2023 7:12 am
- Forum: General Discussion Forum
- Topic: Taking out a Fordoor engine
- Replies: 10
- Views: 664
Re: Taking out a Fordoor engine
Pull the column and hood shelves , I use third plug hole to lift by.
- Thu Oct 19, 2023 6:25 pm
- Forum: Classifieds - Parts
- Topic: WTB top of window seal
- Replies: 3
- Views: 217
Re: WTB top of window seal
found one, give me a jingle 419-618-1025
- Thu Oct 19, 2023 6:13 pm
- Forum: General Discussion Forum
- Topic: High compression head
- Replies: 6
- Views: 682
Re: High compression head
The top looks like an early Reeder head, but the bottom is different, maybe they where playing with combustion chamber?
- Tue Oct 10, 2023 5:31 pm
- Forum: General Discussion Forum
- Topic: Unusual T Ford hub cap found at Hershey
- Replies: 9
- Views: 932
Re: Unusual T Ford hub cap found at Hershey
I have one just like that on my unrestored 12, thought it was a fluke now wondering?
- Sun Oct 08, 2023 8:39 am
- Forum: Classifieds - Parts
- Topic: Looking for
- Replies: 4
- Views: 586
Re: Looking for
I may have the fender irons for the forked lights but no eyelet ones for top strap?
- Fri Oct 06, 2023 4:38 pm
- Forum: Classifieds - Parts
- Topic: WTB. Rebuilt short block..
- Replies: 3
- Views: 433
Re: WTB. Rebuilt short block..
I just hauled a complete engine home from Hershey that looks promising for a daily driver?
- Thu Sep 28, 2023 7:02 am
- Forum: General Discussion Forum
- Topic: counterbalanced crankshaft what make??
- Replies: 18
- Views: 1122
Re: counterbalanced crankshaft what make??
years back I checked the metallurgy of them and they where high Cromium in them like the Dodge Bros. cranks.
- Wed Sep 27, 2023 12:56 pm
- Forum: Classifieds - Parts
- Topic: rebuilt Field Coils
- Replies: 0
- Views: 245
rebuilt Field Coils
I will have some of the Lucius family field coils at hershey C41 29-31 or light pole 41, he will be there wednesday.
- Tue Sep 26, 2023 7:49 am
- Forum: General Discussion Forum
- Topic: Model T copy Metz engine
- Replies: 16
- Views: 1193
Re: Model T copy Metz engine
The Metz head is different on two bolt holes, the need sleeved and redrilled to make work, close friend has one on his car, he also counter sunk the plugs deeper so special plugs are no longer needed, it did up the compression a bunch, he said if he had to do it over again he would just run the Hi c...
- Fri Sep 22, 2023 6:52 pm
- Forum: General Discussion Forum
- Topic: Gaslight Auto parts
- Replies: 10
- Views: 919
Re: Gaslight Auto parts
Nick even brings me the parts to local airport, can get a piece of pie and T Parts, takes me 22 minutes to fly there, good excuse to fly !
- Sat Sep 16, 2023 5:19 pm
- Forum: Classifieds - Parts
- Topic: WTD 1914 engine
- Replies: 4
- Views: 510
Re: WTD 1914 engine
do you want just the block , tiffin ohio
- Thu Sep 14, 2023 7:13 am
- Forum: Classifieds - Parts
- Topic: Connecting Rod Cores
- Replies: 3
- Views: 366
Re: Connecting Rod Cores
Dan would love to buy some good caps if the rods come with them oh well! see you at hershey!
- Thu Sep 14, 2023 7:11 am
- Forum: Classifieds - Parts
- Topic: WTB: Left Side Small Drum Housing
- Replies: 3
- Views: 257
Re: WTB: Left Side Small Drum Housing
Come take your pick, Tiffin Ohio, 419-618-1025 Joe Bell
- Tue Sep 12, 2023 6:52 pm
- Forum: General Discussion Forum
- Topic: Rob Sterling Pottsville Pa. contact
- Replies: 6
- Views: 443
Re: Rob Sterling Pottsville Pa. contact
Thanks to some one he contacted me!
- Tue Sep 12, 2023 5:13 pm
- Forum: General Discussion Forum
- Topic: Rob Sterling Pottsville Pa. contact
- Replies: 6
- Views: 443
Re: Rob Sterling Pottsville Pa. contact
I have tried emailing and looking on the net for other phone contacts.
- Tue Sep 12, 2023 12:52 pm
- Forum: General Discussion Forum
- Topic: Rob Sterling Pottsville Pa. contact
- Replies: 6
- Views: 443
Re: Rob Sterling Pottsville Pa. contact
would love to return his engine to hershey for him? Any one?
- Sat Sep 09, 2023 7:09 am
- Forum: General Discussion Forum
- Topic: Post Your 2023 Hershey Spaces and Goods on Offer Here!
- Replies: 43
- Views: 4681
Re: Post Your 2023 Hershey Spaces and Goods on Offer Here!
C4I 29-31 or look for light pole 41, right next to the Divco truck and Brookville Roadster.
- Wed Sep 06, 2023 5:59 pm
- Forum: General Discussion Forum
- Topic: Rob Sterling Pottsville Pa. contact
- Replies: 6
- Views: 443
Re: Rob Sterling Pottsville Pa. contact
any one by chance know him in your area?
- Tue Sep 05, 2023 7:36 pm
- Forum: General Discussion Forum
- Topic: Ohio Jamboree
- Replies: 3
- Views: 407
Re: Ohio Jamboree
Well said Jerry!
- Tue Sep 05, 2023 4:27 pm
- Forum: General Discussion Forum
- Topic: Rob Sterling Pottsville Pa. contact
- Replies: 6
- Views: 443
Rob Sterling Pottsville Pa. contact
Looking to get a hold of Rob. Thanks Joe
- Fri Aug 25, 2023 11:05 am
- Forum: General Discussion Forum
- Topic: Quick school show & covered bridge picnic tour
- Replies: 7
- Views: 612
Re: Quick school show & covered bridge picnic tour
Wish i knew the pic I would of cleaned up some !
- Thu Aug 24, 2023 12:22 pm
- Forum: General Discussion Forum
- Topic: Cylinder Head Flatness
- Replies: 16
- Views: 1092
Re: Cylinder Head Flatness
As some one comment on I have had to shorten the bolts from block and heads being milled so bolt does not bottom out.
- Thu Aug 17, 2023 5:58 pm
- Forum: Classifieds - Parts
- Topic: WTB 1912 Double Stack Magneto Coil
- Replies: 6
- Views: 511
Re: WTB 1912 Double Stack Magneto Coil
1912 will have the sheetmetal plate with 1/4 double stack, made for the 5/8 magnets unless it has been changed?
- Thu Aug 17, 2023 11:05 am
- Forum: Classifieds - Parts
- Topic: WTB 1912 Double Stack Magneto Coil
- Replies: 6
- Views: 511
Re: WTB 1912 Double Stack Magneto Coil
Lucius family rebuilds them every day, they are the supplier for all 419-595-2310. Hope this helps
- Sun Jul 23, 2023 3:17 pm
- Forum: General Discussion Forum
- Topic: Back in the saddle
- Replies: 60
- Views: 5350
Re: Back in the saddle
Nice oiler on the hogshead, looks factory!
- Thu Jul 20, 2023 1:29 pm
- Forum: Classifieds - Parts
- Topic: WTB 1912-1916 long nose oil pan.
- Replies: 15
- Views: 810
Re: WTB 1912-1916 long nose oil pan.
If you are not in a hurry have a friend that travels to Ohio a few times a year, he is in Raliegh Durham area, I have several 14-17 pans. 419-618-1025 Tiffin Ohio.
- Mon Jul 17, 2023 6:37 am
- Forum: General Discussion Forum
- Topic: 1925/26 coupe project
- Replies: 26
- Views: 1257
Re: 1925/26 coupe project
That is a 26 body, so you need 26 hood and high radiator.
- Mon Jul 17, 2023 6:34 am
- Forum: Classifieds - Parts
- Topic: Wanted coupe doors
- Replies: 3
- Views: 353
Re: Wanted coupe doors
Just gave a set away, tree had fallen on back part of body.