Search found 70 matches

by JunkyJud
Mon Oct 23, 2023 11:45 am
Forum: General Discussion Forum
Topic: Locking ring wheel help
Replies: 21
Views: 781

Re: Locking ring wheel help

One more thing to watch is when removing a stuck tire, be careful not to smash the lip of the rim with the tire irons. If the lip gets smashed, it will no longer allow the lock ring to fully seat.
by JunkyJud
Sun Aug 13, 2023 7:09 pm
Forum: Classifieds - Parts
Topic: Sold - Atwater-Kent distributors and parts lot
Replies: 3
Views: 346

Re: For sale - Atwater-Kent distributors and parts lot

Sold to George. Thanks MTFCA.
by JunkyJud
Sun Aug 13, 2023 4:06 pm
Forum: Classifieds - Parts
Topic: Sold - Atwater-Kent distributors and parts lot
Replies: 3
Views: 346

Sold - Atwater-Kent distributors and parts lot

For sale is a parts lot that includes two Atwater-Kent distributors, a Spad timer, Ford plugs, and other parts as seen in the photos. $70 shipped.
by JunkyJud
Thu Jun 15, 2023 10:27 pm
Forum: General Discussion Forum
Topic: Thread Size, Early Spark and Throttle Rods
Replies: 12
Views: 1034

Re: Thread Size, Early Spark and Throttle Rods

I rarely visit the forum anymore because of the atmosphere but when I decide to, I just look at Larry's posts to see if the same butt hurt responders are there. I'm never let down.
by JunkyJud
Sun Feb 26, 2023 8:12 am
Forum: General Discussion Forum
Topic: Canopy Top for TT Cab
Replies: 22
Views: 1962

Re: Canopy Top for TT Cab

That looks great. I misunderstood that you were installing a canopy over the bed. Will you be installing screen sides? I would like to see a picture of the completed project.
by JunkyJud
Thu Feb 23, 2023 1:11 pm
Forum: General Discussion Forum
Topic: Canopy Top for TT Cab
Replies: 22
Views: 1962

Re: Canopy Top for TT Cab

Below is a link to an earlier roof discussion.

https://www.mtfca.com/discus/messages/5 ... 1440591089
by JunkyJud
Thu Feb 23, 2023 1:06 pm
Forum: General Discussion Forum
Topic: Canopy Top for TT Cab
Replies: 22
Views: 1962

Re: Canopy Top for TT Cab

The “low” roof was the earliest design and not made to stow side curtains. I believe this low roof was discontinued in early ‘24. The “high” roof had storage holes and clips for the side curtains. The steel side panels were also notched at the top to accept the cross bows for the low roof. These sid...
by JunkyJud
Wed Feb 22, 2023 10:28 pm
Forum: General Discussion Forum
Topic: Canopy Top for TT Cab
Replies: 22
Views: 1962

Re: Canopy Top for TT Cab

And a few more...
by JunkyJud
Wed Feb 22, 2023 10:25 pm
Forum: General Discussion Forum
Topic: Canopy Top for TT Cab
Replies: 22
Views: 1962

Re: Canopy Top for TT Cab

Here are some photos of my original roof that may help you with details.
DSCN1680.JPG
DSCN1679.JPG
DSCN1674.JPG
C cab 6.jpg
C cab 5.jpg
by JunkyJud
Tue Sep 27, 2022 9:41 pm
Forum: General Discussion Forum
Topic: Radiator repair?
Replies: 25
Views: 2791

Re: Radiator repair?

Many years ago my father made a soldering iron from an old veneer iron. The temperature is adjustable from 200 - 500F. He milled a slot in the face of the iron and inset a copper strip. This is one of the best soldering irons that I've ever used.
Iron 1.jpg
Iron 2.jpg
by JunkyJud
Sun Aug 07, 2022 12:08 pm
Forum: General Discussion Forum
Topic: Finally found a screw driver for my TT
Replies: 14
Views: 2263

Re: Finally found a screw driver for my TT

After looking at pictures of other original screw drivers, I believe that the flutes in the handle were fairly shallow when new. The drawing above makes them look very deep and defined but I don't believe that they were so pronounced.
by JunkyJud
Sat Aug 06, 2022 9:52 pm
Forum: General Discussion Forum
Topic: Finally found a screw driver for my TT
Replies: 14
Views: 2263

Finally found a screw driver for my TT

I've looked for quite a while for a correct screw driver for my TT. I found one today at a steam and gas engine show for $8.00.

Is there any record of years when this was provided in the tool kit?
Screw driver.jpg
by JunkyJud
Sat Mar 12, 2022 10:50 am
Forum: General Discussion Forum
Topic: ***1913-1925 Model TT Ruckstell Slift Lock Assembly***
Replies: 21
Views: 2653

Re: ***1913-1925 Model TT Ruckstell Slift Lock Assembly***

I've seen two of the bronze TT shifters broken on the part of the housing where the steel shift arm shaft goes through.
by JunkyJud
Sat Mar 12, 2022 8:31 am
Forum: General Discussion Forum
Topic: ***1913-1925 Model TT Ruckstell Slift Lock Assembly***
Replies: 21
Views: 2653

Re: ***1913-1925 Model TT Ruckstell Slift Lock Assembly***

Martynn, From what I know, there were 3 different TT Ruckstell shifters. The earliest, and weakest, was the bronze housed Hall-Scott shifter as is shown above. I don't believe that this one had the upper spring and retainer. The next is the cast short Hall-Scott shifter, like the one you have drawn....
by JunkyJud
Mon Nov 08, 2021 7:01 pm
Forum: General Discussion Forum
Topic: How many 1917-27 TT Trucks are left?
Replies: 37
Views: 5055

Re: How many 1917-27 TT Trucks are left?

And another.
TT.jpg
by JunkyJud
Sun Sep 27, 2020 10:01 pm
Forum: General Discussion Forum
Topic: Ford tire pump: Check valve?
Replies: 14
Views: 2462

Re: Ford tire pump: Check valve?

The Ford pumps did not come with a check valve (as is stated in the Lang's check valve link above). Any check valves, at least in the brass pumps, were after market. The difference in the valve stem coupler would be the little piece of metal in the middle of the coupler that would work in conjunctio...
by JunkyJud
Fri Jul 10, 2020 10:07 pm
Forum: General Discussion Forum
Topic: TT Truck Running Boards
Replies: 25
Views: 6663

Re: TT Truck Running Boards

Here is a thread from a few years ago with a lot of good pictures and more discussion about TT running boards:

http://www.mtfca.com/discus/messages/59 ... 1451757467
by JunkyJud
Fri Jul 10, 2020 7:57 am
Forum: General Discussion Forum
Topic: TT Truck Running Boards
Replies: 25
Views: 6663

Re: TT Truck Running Boards

From all of the factory photos I have seen, I believe that the long boot scraper boards were used for closed cabs and short boards were used for C cabs throughout both of their production runs. Short boards actually have two variations: one to be used with wood blocks and one to be used without. The...
by JunkyJud
Sat May 09, 2020 9:04 pm
Forum: General Discussion Forum
Topic: Show me your TT beds!
Replies: 15
Views: 4347

Re: Show me your TT beds!

I built this one for my TT including most of the hardware.
2 TT.jpg
by JunkyJud
Mon Mar 23, 2020 8:31 am
Forum: Classifieds - Parts
Topic: For sale - Jaeger dash clock
Replies: 3
Views: 2202

Re: For sale - Jaeger dash clock

Tom, I sent you an email.
by JunkyJud
Sun Mar 22, 2020 7:33 pm
Forum: Classifieds - Parts
Topic: For sale - Kellogg tire pressure gauge
Replies: 2
Views: 1709

Re: For sale - Kellogg tire pressure gauge

I sent you an email Tim. Thanks.
by JunkyJud
Sun Mar 22, 2020 6:38 pm
Forum: Classifieds - Parts
Topic: For sale - Kellogg tire pressure gauge
Replies: 2
Views: 1709

For sale - Kellogg tire pressure gauge

This is an "automatic" Kellogg tire air pressure gauge made in Rochester, NY. It was to be screwed on the stem and then filled through the side valve so that there was a constant pressure reading while pumping up the tire. It has a patent date of March 1904. The gauge works and seems to be accurate....
by JunkyJud
Sun Mar 22, 2020 6:31 pm
Forum: Classifieds - Parts
Topic: For sale - Jaeger dash clock
Replies: 3
Views: 2202

For sale - Jaeger dash clock

This is a Jaeger 8 day dash clock that is Swiss made. It has a 3" dial and is 5 1/4" long overall. It runs and keeps time. I'm not sure what kind of car it came out of but it could make a nice clock for a speedster or whatever you need it for. $70.00 shipped in US. PM me if interested. Jaeger 1.jpg ...
by JunkyJud
Thu Jan 16, 2020 4:17 pm
Forum: Classifieds - Parts
Topic: For sale - Original steering wheel w/ cast spider $85.00
Replies: 5
Views: 2845

Re: For sale - Original steering wheel w/ cast spider

$85.00 shipped. PM me if interested.
by JunkyJud
Wed Jan 15, 2020 5:52 pm
Forum: Classifieds - Parts
Topic: For sale - Original steering wheel w/ cast spider $85.00
Replies: 5
Views: 2845

For sale - Original steering wheel w/ cast spider $85.00

For sale is a very nice original 14.75" O.D. steering wheel with a cast steel spider and wood rim. There is still a fair amount of original paint left and it appears that the screws holding the rim have never been out. The only defects are on the bottom of the hub where it looks like a puller damage...
by JunkyJud
Wed Jan 01, 2020 3:16 pm
Forum: General Discussion Forum
Topic: Paint
Replies: 11
Views: 4698

Re: Paint

I'll second what Hank Lee said, Nason single stage urethane and the recommended primers. This is a high quality and cost effective product that can be cut and buffed, if you so desire, with little effort and nice results. The look of the single stage is also more appropriate on an old car as compare...
by JunkyJud
Mon Dec 02, 2019 9:39 pm
Forum: General Discussion Forum
Topic: TT rims
Replies: 1
Views: 1466

Re: TT rims

The boss around your old valve stem sat in a keeper in your felloe to prevent the rim from spinning on it. Your new rims don't appear to be TT but should work okay as long as everything fits up as stock. You should weld in a similar boss on the new rims to act in the same manner as the originals.
by JunkyJud
Thu Nov 28, 2019 11:39 am
Forum: General Discussion Forum
Topic: 24-27 C-cab Roof
Replies: 9
Views: 3749

Re: 24-27 C-cab Roof

They are the top, center bolt for the rear curtain brackets. The other two lower ones are wood screws.
Roof 19.jpg
by JunkyJud
Sun Nov 24, 2019 12:16 pm
Forum: General Discussion Forum
Topic: 24-27 C-cab Roof
Replies: 9
Views: 3749

Re: 24-27 C-cab Roof

Also, the roof does show the roof slats but it is minor as long as the roof material is tight. I expect that they showed some originally too but don't show up well in period photos. They certainly did not have thick padding. An overstuffed roof on a C cab doesn't look good.
by JunkyJud
Sun Nov 24, 2019 12:13 pm
Forum: General Discussion Forum
Topic: 24-27 C-cab Roof
Replies: 9
Views: 3749

Re: 24-27 C-cab Roof

Below are a couple of links to previous roof discussions. Keep in mind that there are two different C cab roofs. There are also two different side curtain designs. The early low roof with square window curtains are the minority. http://www.mtfca.com/discus/messages/506218/565546.html?1440591089 http...
by JunkyJud
Wed Oct 30, 2019 1:26 pm
Forum: General Discussion Forum
Topic: Using AA rims for a TT
Replies: 5
Views: 2549

Re: Using AA rims for a TT

Tom, I think that you'll find that the inside edge of an AA rim (where the rim seats on the wheel) has a sharper corner that a TT rim. This prevents it from going on the wheel the whole way. I had a nice AA rim that I was going to use on my TT until I found this problem. I don't know how many AA rim...
by JunkyJud
Sat Oct 26, 2019 4:44 pm
Forum: General Discussion Forum
Topic: Cleaning up is a good thing
Replies: 31
Views: 10094

Re: Cleaning up is a good thing

Jim Eubanks wrote:
Sat Oct 26, 2019 9:04 am
There is no gasoline vapor pumped in, fresh air comes in thru the part that screws in to the head.
Ahh, that's clever. Do they work well?
by JunkyJud
Sat Oct 26, 2019 8:21 am
Forum: General Discussion Forum
Topic: Cleaning up is a good thing
Replies: 31
Views: 10094

Re: Cleaning up is a good thing

I've often wondered if the gasoline vapor that is pumped into the tube with one of these does any kind of damage over time.
by JunkyJud
Sat Oct 12, 2019 10:48 am
Forum: General Discussion Forum
Topic: Any ideas about removing a stubborn wheel key?
Replies: 30
Views: 9772

Re: Any ideas about removing a stubborn wheel key?

I would rather have the key a little snug than so loose that you can slide it around with your finger. Here is how I have removed every kind of key and it always works. By lifting the key up and out with the side cutters gripping it, you aren't working against all of the surface area along the lengt...
by JunkyJud
Wed Sep 18, 2019 7:25 pm
Forum: Classifieds - Parts
Topic: OT - Wanted - V8 60 h.p. manifolds
Replies: 10
Views: 4005

Re: OT - Wanted - V8 60 h.p. manifolds

Thanks Joe.
by JunkyJud
Tue Sep 17, 2019 7:51 pm
Forum: Classifieds - Parts
Topic: OT - Wanted - V8 60 h.p. manifolds
Replies: 10
Views: 4005

Re: OT - Wanted - V8 60 h.p. manifolds

Bill, thanks for looking. Let me know if you come up with a set.

Mark, I'll check it out.
by JunkyJud
Mon Sep 16, 2019 8:40 pm
Forum: Classifieds - Parts
Topic: OT - Wanted - V8 60 h.p. manifolds
Replies: 10
Views: 4005

OT - Wanted - V8 60 h.p. manifolds

I know that this is quite off topic but I know that a lot of the folks here also have interest in early Ford V8's. I'm in need of a nice set of exhaust manifolds for a 60 h.p. V8. If anyone has a set for sale, please PM me. Thank you.
by JunkyJud
Fri Sep 13, 2019 6:52 pm
Forum: General Discussion Forum
Topic: Model TT id?
Replies: 33
Views: 9092

Re: Model TT id?

It is a late ‘26-‘27 cab. The windshield adjustment brackets are straight instead of angled like the earlier models.
by JunkyJud
Tue Sep 10, 2019 7:30 am
Forum: Classifieds - Parts
Topic: Wanted - Rear mounted TT aux trans
Replies: 0
Views: 1100

Wanted - Rear mounted TT aux trans

I am in search of a rear mounted TT auxiliary transmission with an overdrive. PM me if you have something available. Thank you.
by JunkyJud
Mon Sep 09, 2019 6:31 pm
Forum: General Discussion Forum
Topic: I need a change on my TT
Replies: 10
Views: 4305

Re: I need a change on my TT

So, does anyone have any relevant experience with a rear mounted TT auxiliary transmission? I appreciate the other input but Scat cranks and balancing aren't in the cards.
by JunkyJud
Mon Sep 09, 2019 11:25 am
Forum: General Discussion Forum
Topic: I need a change on my TT
Replies: 10
Views: 4305

Re: I need a change on my TT

All other things remaining equal, a high speed gear set will gain you about 8 or 9 mph over the low speed set. My engine is stock with a functioning magneto so 1600 rpm is about the maximum speed for mine. 40 mph would run mine over 2100 rpm...this would create some turmoil in my crank case and mayb...
by JunkyJud
Sun Sep 08, 2019 9:55 pm
Forum: General Discussion Forum
Topic: I need a change on my TT
Replies: 10
Views: 4305

I need a change on my TT

This spring I finished building a Model A pickup from parts and pieces. It has a '36 flathead, '39 transmission, hydraulic brakes, and lots of other early Ford stuff. It is a blast to drive. It is so much fun that my TT has started gathering dust. For fear of losing too much interest, I think that I...
by JunkyJud
Tue Apr 23, 2019 1:26 pm
Forum: General Discussion Forum
Topic: What padding for TT top?
Replies: 8
Views: 3762

Re: What padding for TT top?

On my C cab I used a layer of black duck canvas over the slats followed by a layer of 100% quilting cotton with the vinyl over that. The quilt cotton is only about 1/8” thick and smooths out the roof imperfections without being too thick. The worst looking thing on an old truck is to have a “muffin ...
by JunkyJud
Sun Mar 31, 2019 8:53 pm
Forum: Classifieds - Parts
Topic: For sale - Wind up Jaeger dash clock
Replies: 1
Views: 1723

For sale - Wind up Jaeger dash clock

For sale is a nice Jaeger dash clock. This is a Swiss made clock by Jaeger Watch Co. New York. It is an 8 day clock that runs very well and keeps almost perfect time. There is a scratch on the glass but is in nice shape otherwise. The original nickle plating is in good shape with the typical aging o...
by JunkyJud
Sat Mar 23, 2019 7:25 pm
Forum: Classifieds - Parts
Topic: For sale - Accessory double windshield wiper
Replies: 0
Views: 1347

For sale - Accessory double windshield wiper

For sale is an accessory double windshield wiper. It clips onto the top of the open car windshield frame and has a wiper for both the outside and the inside for those times when it is raining outside and fogging up inside! It is in very good condition but needs new wiper blades installed. $28.00 shi...
by JunkyJud
Sun Feb 24, 2019 3:50 pm
Forum: Classifieds - Parts
Topic: For sale: Firestone battery display
Replies: 2
Views: 2107

Re: For sale: Firestone battery display

$60.00 shipped
by JunkyJud
Sat Feb 23, 2019 9:15 pm
Forum: Classifieds - Parts
Topic: For sale: Firestone battery display
Replies: 2
Views: 2107

Re: For sale: Firestone battery display

$75.00 shipped.
by JunkyJud
Sat Feb 23, 2019 4:47 pm
Forum: Classifieds - Parts
Topic: For sale: Firestone battery display
Replies: 2
Views: 2107

For sale: Firestone battery display

For sale is a Firestone hard rubber battery cigarette box. I'm not sure of the age but it is probably from the '30's but would be very nice in a T or early Ford display. This box is in very good condition with only a couple of very small chips. It also still is about half full of Lucky Strike cigare...
by JunkyJud
Sat Feb 09, 2019 11:23 am
Forum: Classifieds - Parts
Topic: For sale - Rear view mirror with clock
Replies: 2
Views: 2155

For sale - Rear view mirror with clock

For sale is an accessory rear view mirror with a clock / watch. The mirror has the swivel bracket and the glass has some edge chips at the mount with some blemishes in the silvering. The clock is an Ingersoll from the '20's or '30's and does not run but the escapement wheel spins when shook. The mai...
by JunkyJud
Sat Feb 09, 2019 10:21 am
Forum: Classifieds - Parts
Topic: For sale - Pittsburgh Dirigible Search Light - Brass
Replies: 4
Views: 3035

For sale - Pittsburgh Dirigible Search Light - Brass

For sale is a Pittsburgh Dirigible search light. The light is all brass with the exception of the bezel which is aluminum with a convex glass lens. There are a couple of cracks in the bezel which are shown in the photos. Overall, the length is 5 1/4" and the bezel diameter is 2 3/4". This is a reall...
by JunkyJud
Fri Feb 08, 2019 4:13 pm
Forum: General Discussion Forum
Topic: Cramped TT cabs
Replies: 21
Views: 8005

Re: Cramped TT cabs

The man in the foremost position in this photo was the owner of my C cab. He is "J.G. Huch" as is painted on the side (see avatar). From what I've been told by relatives, he was about 5'5" tall. I'm 5'9" and could comfortably drive my TT all day long.


H.E. King truck.jpg
by JunkyJud
Wed Feb 06, 2019 12:28 pm
Forum: General Discussion Forum
Topic: New TT Owner
Replies: 15
Views: 6001

Re: New TT Owner

This is an interesting C cab. If you look at the inside top edge of the cab sides (where the steel meets the wood) you will see 3 notches. The depth of each one gets smaller towards the rear of the cab. These notches were to accommodate the early “low roof”. The wooden roof that is currently on the ...
by JunkyJud
Sun Feb 03, 2019 7:56 am
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

That is the modern outer neoprene seal. It replaces the original spring steel and leather outer seal that is just inboard of the Hyatt bearing sleeve.
by JunkyJud
Sat Feb 02, 2019 7:17 pm
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

This is the fiber washer as it sits in the Ruckstell rear. The thickness has to be adjusted to ensure the elimination of play and also allow free rotation when the assembly is together.

Ruckstell washer.jpg
by JunkyJud
Sat Feb 02, 2019 7:11 pm
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

There is one fiber washer in the Ruckstell. The inner ball bearings are just soaked to clean them up. Unless a rear is full of water, those bearings are typically in very good condition.
by JunkyJud
Sat Feb 02, 2019 4:02 pm
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

Martynn, both sides of the spider carrier are identical. Regarding a fiber washer, I don't believe that there is one like in a car rear end. Any of the rears that I have disassembled do not have them. The only fiber washer that I'm familiar with is in the TT Ruckstell rear. The gears are a very tig...
by JunkyJud
Sat Feb 02, 2019 12:16 pm
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

Here are a couple more. I think that Dan's photos are from an AA rear but I'm not positive.


Axle gear 7.jpg
Axle gear 6.jpg
Axle gear 5.jpg
by JunkyJud
Sat Feb 02, 2019 12:12 pm
Forum: General Discussion Forum
Topic: TT Owners...
Replies: 41
Views: 10660

Re: TT Owners...

Here are some of the axle gears.
Axle gear 4.jpg
Axle gear 3.jpg
Axle gear 2.jpg
Axle gear 1.jpg
Axle clip 1.jpg
by JunkyJud
Mon Jan 21, 2019 6:51 am
Forum: General Discussion Forum
Topic: Experimental 6 cylinder Model T
Replies: 16
Views: 6912

Re: Experimental 6 cylinder Model T

Pete, I believe you are correct on this. I did some business with a gentleman who is familiar with this T. It does make me curious about the history of it. For as nice of an engine as it is, you would think that there would be a couple more floating around in museums or elsewhere.
by JunkyJud
Mon Jan 21, 2019 6:45 am
Forum: General Discussion Forum
Topic: Two piece valves
Replies: 14
Views: 6163

Re: Two piece valves

My TT has a replacement engine that dates to 1929. It was stock bore when I got it and it had 1 piece valves that I believe were original.
by JunkyJud
Sun Jan 20, 2019 12:02 pm
Forum: General Discussion Forum
Topic: Experimental 6 cylinder Model T
Replies: 16
Views: 6912

Experimental 6 cylinder Model T

I have read that prior to the release of the Model A, Edsel Ford commissioned a handful of 6 cylinder model T's. I have a couple of photos of one and would like to know more of the history of them.
6 cylinder Model T 1.jp [attachment=1]6 cylinder Model T 1.jpg
by JunkyJud
Sun Jan 13, 2019 12:11 pm
Forum: General Discussion Forum
Topic: My and Your TT trucks
Replies: 51
Views: 16773

Re: My and Your TT trucks

TT 5.jpg
by JunkyJud
Tue Jan 08, 2019 9:14 pm
Forum: General Discussion Forum
Topic: TT Ruckstell Shiftlock disengages
Replies: 10
Views: 4534

Re: TT Ruckstell Shiftlock disengages

The wear mark on the ring has what appears to be about the same angle as the plunger when it was cocked diagonally in your first few photos. It looks like the wear mark is probably also about as wide as the side-to-side play that the ring has in the yoke. This groove may be a symptom and not the cau...
by JunkyJud
Tue Jan 08, 2019 7:27 pm
Forum: General Discussion Forum
Topic: TT Ruckstell Shiftlock disengages
Replies: 10
Views: 4534

Re: TT Ruckstell Shiftlock disengages

The notch ring has a groove worn in the center of it. That looks to be what is kicking the plunger diagonally.