Search found 232 matches

by Dan B
Fri Nov 25, 2022 11:30 pm
Forum: Classifieds - Parts
Topic: original Ruckstell shifter knob
Replies: 7
Views: 1686

Re: original Ruckstell shifter knob

Here is what an original look like. Not for sale.
by Dan B
Wed Nov 24, 2021 9:17 pm
Forum: General Discussion Forum
Topic: I Almost Threw This Useless Screwdriver Away….
Replies: 15
Views: 3229

Re: I Almost Threw This Useless Screwdriver Away….

A6661CFB-B0A1-4F15-8C2C-12806E7A7478.jpeg
A6661CFB-B0A1-4F15-8C2C-12806E7A7478.jpeg (35.72 KiB) Viewed 2108 times
by Dan B
Tue Nov 23, 2021 10:09 pm
Forum: General Discussion Forum
Topic: Fine Line Between Hoarding and Collecting
Replies: 20
Views: 3260

Re: Fine Line Between Hoarding and Collecting

This is the future. There has been at least one other “model t collection” auction recently where entire shelves and bins of parts were sold for a few bucks. You can’t be for “keeping the hobby alive” and also care about getting the money out of a part you paid top dollar for 40 years ago. Times are...
by Dan B
Thu Nov 11, 2021 8:53 pm
Forum: Classifieds - Parts
Topic: Wanted: AC Brake Equalizer
Replies: 11
Views: 2426

Re: Wanted: AC Brake Equalizer

Yes, I am interested in that style as well.
by Dan B
Sun Nov 07, 2021 9:35 pm
Forum: Classifieds - Parts
Topic: Wanted: AC Brake Equalizer
Replies: 11
Views: 2426

Wanted: AC Brake Equalizer

I am looking for a complete equalizer setup for new AC Brakes accessory outside brakes. Would prefer the equalizer setup offered by Richard Baughman, as pictured below. Apparently these are not currently being offered.

Please contact me via private message.

Thanks!
by Dan B
Mon Oct 25, 2021 8:48 am
Forum: Classifieds - Parts
Topic: SOLD! - FOR SALE - EVER READY AUTOMATIC OILER SETUP NEW OLD STOCK IN THE ORIGINAL BOX
Replies: 5
Views: 1759

Re: PRICE REDUCED - FOR SALE - EVER READY AUTOMATIC OILER SETUP NEW OLD STOCK IN THE ORIGINAL BOX

What a deal! I remember a time not too long ago when these were snatched up for double the price. Every collector needs one of these on the shelf.
by Dan B
Sat Sep 18, 2021 9:01 pm
Forum: General Discussion Forum
Topic: Tires and Tubes on the Cut-Down Touring
Replies: 8
Views: 1375

Re: Tires and Tubes on the Cut-Down Touring

Looks great! Photos will for sure help someone in the future. I think Royce was also a proponent of this method and had a similar post years ago. Sure wish he was still on the forum.
by Dan B
Sat Aug 28, 2021 10:19 pm
Forum: Classifieds - Parts
Topic: Wanted: Gas Shut-Off
Replies: 12
Views: 2162

Re: Wanted: Gas Shut-Off

These were made by Bob Scherzer. I wonder if they will continue to be made now? Here’s a post from the old forum where he said he couldn’t believe how many of these he sold. http://www.mtfca.com/discus/messages/599638/624096.html?1458254953 If they are done making them, sure would be great if someon...
by Dan B
Thu Aug 12, 2021 8:50 am
Forum: General Discussion Forum
Topic: Ok ruckstell experts here's one for you
Replies: 44
Views: 5300

Re: Ok ruckstell experts here's one for you

I'm sure MTFCA thanks you for pushing their book just as they thak me for having one. I just don't have it available so I thought I would ask. I like to think of the forum as a place for people to talk and discuss rather than just be directed somewhere else. I’m not pushing anything. I am trying to...
by Dan B
Thu Aug 12, 2021 8:23 am
Forum: General Discussion Forum
Topic: Ok ruckstell experts here's one for you
Replies: 44
Views: 5300

Re: Ok ruckstell experts here's one for you

You don’t need to be an expert with the MTFCA Ruckstell book. It describes exactly the test you need to perform to detect for a neutral issue. This includes lining all of the parts up in the Ruckstell housing and shifting so that you can see the engagement of the sliding gear on the carrier assembly...
by Dan B
Mon Jul 19, 2021 7:21 pm
Forum: General Discussion Forum
Topic: New Updated Forum Rule
Replies: 12
Views: 3225

Re: New Updated Forum Rule

I think they’re saying that if you make Model T headlight lenses, and someone else makes headlight lenses, you shouldn’t be on here talking negatively about your competitor’s products to make yours look better. That’s different than giving honest feedback about a product as a consumer/user. If you w...
by Dan B
Wed Jul 14, 2021 2:12 pm
Forum: General Discussion Forum
Topic: 1915 Touring Value
Replies: 22
Views: 3900

Re: 1915 Touring Value

I suggest searching on the Vehicle classifieds on this site for realistic values. Vehicle values “on the outside” are all over the place. A random huckster at a public sale will bring more than a brass car posted on this site if someone there just has to have it. https://mtfca.com/phpBB3/viewforum.p...
by Dan B
Mon Jul 12, 2021 9:40 am
Forum: General Discussion Forum
Topic: Starting the starter cover screws
Replies: 15
Views: 2355

Re: Starting the starter cover screws

This is why I always cover the area in tin foil held down by solid lead blocks. Otherwise, the flux escapes and makes finding the screws all but impossible.
by Dan B
Sun Jul 11, 2021 10:46 pm
Forum: General Discussion Forum
Topic: Starting the starter cover screws
Replies: 15
Views: 2355

Re: Starting the starter cover screws

Why not just magnetize the screwdriver?
by Dan B
Wed Jun 23, 2021 1:29 pm
Forum: General Discussion Forum
Topic: VEHICLES FOR SALE BY THE MTFCA!
Replies: 59
Views: 11862

Re: VEHICLES FOR SALE BY THE MTFCA!

Jeez, relax folks. Has the museum actually taken a specific position on this? Or maybe they just haven’t responded to this forum post since yesterday? Has anyone who is concerned about it picked up the phone to call the museum?
by Dan B
Mon Jun 21, 2021 9:36 am
Forum: General Discussion Forum
Topic: How to set up top dead center and timing.
Replies: 21
Views: 3331

Re: How to set up top dead center and timing.

One thing I almost never hear mentioned about setting TDC timing. WATCH YOUR HANDS! Some instructions tell you to turn the timer cover and listen for the coil buzz. All fine and well as long as you don’t get a free start! This can happen and having your hands near the timer cover puts them right in ...
by Dan B
Sun May 23, 2021 9:11 pm
Forum: General Discussion Forum
Topic: Information on KRW GAP GAUGE
Replies: 10
Views: 2251

Re: Information on KRW GAP GAUGE

Keep looking. There’s nothing quite like this tool and once you use one to setup a magneto you will never do it any other way.
by Dan B
Sat May 22, 2021 6:49 pm
Forum: Classifieds - Parts
Topic: Another option RUCKSTELL WASHERS
Replies: 1
Views: 1014

Re: Another option RUCKSTELL WASHERS

I love your posts Tim!
by Dan B
Tue May 11, 2021 12:50 pm
Forum: General Discussion Forum
Topic: Car cover
Replies: 14
Views: 4923

Re: Car cover

Another vote for the car cover that Langs sells. I believe it is drop shipped from another supplier, but I like to give Langs my business. It fits perfect on my ‘23 Touring. You can see my post here towards the bottom of the thread:

http://www.mtfca.com/discus/messages/41 ... 1407711343
by Dan B
Sat May 08, 2021 4:32 pm
Forum: Classifieds - Parts
Topic: FS Rocky Mountain brakes
Replies: 7
Views: 1971

Re: FS Rocky Mountain brakes

They appear to be small drum FYI.
by Dan B
Mon May 03, 2021 11:34 am
Forum: Classifieds - Parts
Topic: changed my mind for now.
Replies: 8
Views: 2354

Re: FS 23 Touring car body

This has got to be the first time I have seen someone go from a nice full Ford body car to something else. Usually it’s the other way around!
by Dan B
Mon Apr 12, 2021 1:25 pm
Forum: General Discussion Forum
Topic: Who inspired Henry Ford?
Replies: 16
Views: 3173

Re: Who inspired Henry Ford?

Henry Ford was fascinated with watches as a child. He learned to take them apart and reassemble them at an early age. Georges Frederic Roskopf developed “La Prolétaire” (People's Watch) in 1867, intended to be affordable by the masses. I suppose it's possible that young Henry would have known about...
by Dan B
Fri Apr 09, 2021 2:07 pm
Forum: Classifieds - Parts
Topic: Comer Auto Stop Signal , NOS incredible piece FS
Replies: 5
Views: 1410

Re: Comer Auto Stop Signal , NOS incredible piece FS

We were counting on you to reproduce that Tim!

Just kidding! Very cool.
by Dan B
Wed Apr 07, 2021 5:21 pm
Forum: General Discussion Forum
Topic: Howell's Sheet Metal problem
Replies: 24
Views: 4386

Re: Howell's Sheet Metal problem

Howell's makes ill fitting, incorrectly made parts. They have NO CUSTOMER SERVICE. Once they have your money they won't respond to you. Say this too loud and you’ll be promptly reminded you should just be thankful someone’s making “the parts” and willing to take your money. Good luck to the origina...
by Dan B
Tue Mar 16, 2021 8:16 pm
Forum: Classifieds - Vehicles
Topic: FS 1929 Model A Coupe.
Replies: 10
Views: 4429

Re: FS 1929 Model A Coupe.

Hello Bob - Does this coupe have a rumble seat? Can you post any more photos?
by Dan B
Fri Mar 05, 2021 7:30 pm
Forum: General Discussion Forum
Topic: Why this hobby survives.....
Replies: 4
Views: 1405

Re: Why this hobby survives.....

First class all the way around here.
by Dan B
Tue Jan 19, 2021 10:19 pm
Forum: General Discussion Forum
Topic: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA
Replies: 17
Views: 3573

Re: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA

We have not lost any of our data from the old forums and it ALL still lives on this server with the new forums. Copies are backed up in several places and none of it will disappear under my watch. The search function of the old software stopped working when we have to upgrade some of the underlying...
by Dan B
Tue Jan 19, 2021 10:10 am
Forum: General Discussion Forum
Topic: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA
Replies: 17
Views: 3573

Re: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA

With all due respect to the other posters, the discussion is getting off topic from the original question which is a very good one and one that the BOD should consider. The question is how to preserve all of the electronic information from the early days of the MTFCA forum until present. I was a pa...
by Dan B
Tue Jan 19, 2021 10:04 am
Forum: General Discussion Forum
Topic: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA
Replies: 17
Views: 3573

Re: PRESERVING THE INFORMATION & KNOWLEDGE ON MTFCA

With all due respect to the other posters, the discussion is getting off topic from the original question which is a very good one and one that the BOD should consider. The question is how to preserve all of the electronic information from the early days of the MTFCA forum until present. I was a par...
by Dan B
Sun Dec 27, 2020 2:14 pm
Forum: General Discussion Forum
Topic: Stuck fuel shut off valves
Replies: 16
Views: 2971

Re: Stuck fuel shut off valves

I take the center out of mine once a month and lube it with EZ turn, works great. :) https://www.modeltford.com/item/2902LUB.aspx EZ Turn is the stuff you want to use. I put a small amount on the cone of the valve before putting it back together and have never had to have it apart since. Turns EZ!
by Dan B
Wed Dec 23, 2020 8:25 pm
Forum: General Discussion Forum
Topic: Gas Tanks
Replies: 29
Views: 4536

Re: Gas Tanks

Not good news for anyone who finds a project with hopes of getting it back on the road. This is one of the first things many folks buy.

I can think of a few other must have parts that are on a single contingency as well.
by Dan B
Sat Dec 19, 2020 10:12 pm
Forum: General Discussion Forum
Topic: STABIL shelf life
Replies: 21
Views: 3738

Re: STABIL shelf life

Actually it lasts forever. Because it doesn’t do a damn thing. Just ask the 6 or 8 small engine manufacturers that I’ve taken courses with over the years. Some will even void a warranty if it’s found in the tank. Want your engine (whatever it is) to start after a layover? Drain the tank and run it ...
by Dan B
Sat Dec 19, 2020 12:32 pm
Forum: General Discussion Forum
Topic: STABIL shelf life
Replies: 21
Views: 3738

Re: STABIL shelf life

Label says good for 2 years after opening, depending on how you store it, could last longer. I never worry about it, if older container, I just add a shot of MMO to the elixir. Like the Marvel, it makes the T engine nice smelling and helps the valves and guides too anyway :) I do the same thing Dan...
by Dan B
Fri Dec 18, 2020 9:57 pm
Forum: General Discussion Forum
Topic: Tomorrow I make a sad journey
Replies: 17
Views: 3802

Re: Tomorrow I make a sad journey

Sorry to hear of this Rob. What a wonderful talent to share with others and body of work will live on beyond most of us.
by Dan B
Fri Dec 18, 2020 9:17 pm
Forum: General Discussion Forum
Topic: Merry Christmas to all !
Replies: 18
Views: 3108

Re: Merry Christmas to all !

Merry Christmas Tim! Thanks for what you do to make the hobby a bit more fun!
by Dan B
Tue Dec 15, 2020 4:35 pm
Forum: General Discussion Forum
Topic: roughest car you have ever restored?
Replies: 15
Views: 3258

Re: roughest car you have ever restored?

Here is what I started with and how it turned out 13 years later.
3728B391-6167-47EE-BD2A-D89A5745E4BA.jpeg
BA88314D-C74C-4CFE-B2BC-39F10F9250CA.jpeg
B4FAD9FF-8EFD-432A-929C-F3AA302537D7.jpeg
by Dan B
Tue Dec 08, 2020 10:52 pm
Forum: General Discussion Forum
Topic: White Rat Special - Old Photo
Replies: 12
Views: 2962

Re: White Rat Special - Old Photo

Not sure who it is in the photograph, but it was likely taken up in one of the the “coal region” towns of central Pennsylvania where part of my family is from.

It was cheap entertainment for someone I’m sure!
by Dan B
Mon Dec 07, 2020 5:26 pm
Forum: General Discussion Forum
Topic: White Rat Special - Old Photo
Replies: 12
Views: 2962

Re: White Rat Special - Old Photo

I think the car is painted white and I can just imagine someone saying “that car looks like a mouse on wheels” and someone else chiming in with “more like rat!”

First rat rod?
by Dan B
Mon Dec 07, 2020 9:09 am
Forum: General Discussion Forum
Topic: White Rat Special - Old Photo
Replies: 12
Views: 2962

White Rat Special - Old Photo

As found in a pile of old family photographs.
by Dan B
Sun Dec 06, 2020 9:19 pm
Forum: General Discussion Forum
Topic: Walbro Carb
Replies: 4
Views: 1290

Re: Walbro Carb

So many great vintage carbs. Why not start there?
by Dan B
Sun Dec 06, 2020 1:42 pm
Forum: Classifieds - Parts
Topic: (Julius in TX, my phone broke) WTB Anderson Anco Accessory Manifold FOUND
Replies: 5
Views: 1951

Re: WTB Anderson Anco Accessory Manifold

The one in the first picture looks like it’s the one I picked up at Hershey a few years ago. It’s not for sale, but they do come up every once in a while.
by Dan B
Mon Nov 30, 2020 10:58 pm
Forum: General Discussion Forum
Topic: BUSHING FACING TOOL QUESTIONS?
Replies: 12
Views: 2767

Re: BUSHING FACING TOOL QUESTIONS?

Then why do they sell them.
by Dan B
Tue Nov 24, 2020 10:33 pm
Forum: General Discussion Forum
Topic: Running without coolant?
Replies: 17
Views: 3181

Re: Running without coolant?

This was recently discussed. Wish I could find the thread. But most people had the opposite opinion than what was expressed here.
by Dan B
Fri Nov 20, 2020 11:08 am
Forum: General Discussion Forum
Topic: Radiator drain petcock
Replies: 18
Views: 3086

Re: Radiator drain petcock

I use the same petcock thats used in the oil pan. Works great.

I have an original accessory honeycomb so not sure if this would work on a standard.
by Dan B
Mon Nov 16, 2020 12:21 pm
Forum: General Discussion Forum
Topic: Rubbing noise???
Replies: 29
Views: 4836

Re: Rubbing noise???

by Dan B
Mon Nov 16, 2020 8:08 am
Forum: General Discussion Forum
Topic: grease zerk for U-joint grease cup
Replies: 18
Views: 3218

Re: grease zerk for U-joint grease cup

I simply remove the grease cup, install the zerk, grease and then reinstall the cup.

It takes very little effort and that way everything remains stock.

Here’s the zerk that you need.
by Dan B
Mon Nov 16, 2020 7:53 am
Forum: Classifieds - Parts
Topic: Accessory gas tank gauge. For sale
Replies: 8
Views: 2355

Re: Accessory gas tank gauge. For sale

Just wanted to put in a plug for these gas gauges. The quality is top notch and best of all, it works great! Not always the case with Model T era accessories! The funny thing is up until I had this gauge, I figured my tank was usually around half full. Turns out that most of the time I’m riding arou...
by Dan B
Sun Nov 15, 2020 10:26 pm
Forum: General Discussion Forum
Topic: Another Ruckstell Rebuilt
Replies: 1
Views: 1435

Another Ruckstell Rebuilt

After an approximate 9 month rebuild process, my Ruckstell rear end is finally back in my ‘23 Touring. I’ve been waiting to make this post until it was done so I could share what I learned during the process. Since I do not have the extra room or an extra set of hands, I worked on it with my father ...
by Dan B
Sun Nov 15, 2020 8:12 pm
Forum: General Discussion Forum
Topic: Engine splash pans
Replies: 32
Views: 4246

Re: Engine splash pans

Can anyone post a picture of their engine compartment with pans installed?
by Dan B
Mon Nov 09, 2020 12:29 pm
Forum: General Discussion Forum
Topic: Prices going down ?
Replies: 28
Views: 4461

Re: Prices going down ?

This was recently discussed ad nauseam here:

https://mtfca.com/phpBB3/viewtopic.php? ... 86#p115986

I think affordable prices are great for the continuation of the hobby. That’s what we’re in it for....right??
by Dan B
Tue Oct 27, 2020 2:53 pm
Forum: General Discussion Forum
Topic: Bat or Mag start?
Replies: 15
Views: 2808

Re: Bat or Mag start?

My T performs great on magneto but I have a very hard time starting it on magneto even if I have the spark lever set right. I thought maybe it was my hand cranking technique but I can’t even start it using the starter to crank the engine with the switch set on mag. I wish it wasn’t the case but I de...
by Dan B
Wed Oct 21, 2020 11:18 pm
Forum: Classifieds - Parts
Topic: Resurface mag fields
Replies: 9
Views: 2368

Re: Resurface mag fields

All I can say is this is absolutely necessary if you are planning to set it up with the proper gap. Glad someone else is offering it.
by Dan B
Wed Oct 21, 2020 12:28 pm
Forum: General Discussion Forum
Topic: Model t radiator refurb
Replies: 5
Views: 1696

Re: Model t radiator refurb

Very interesting. It appears that you have a flat tube core so was the radiator already replaced at some point?

Looks good.
by Dan B
Tue Oct 20, 2020 5:40 pm
Forum: General Discussion Forum
Topic: Gasoline Evaporation "Tip"
Replies: 7
Views: 1802

Re: Gasoline Evaporation "Tip"

2nighthawks wrote:
Tue Oct 20, 2020 4:16 pm

I'm curious how many other folks have, at one time or another, experienced a partially full (or empty) tank of gasoline to completely and "mysteriously" completely disappear over a period of time,...????
Hmm, that’s a new one.
by Dan B
Tue Oct 20, 2020 2:37 pm
Forum: General Discussion Forum
Topic: Even old experienced drivers can mess up very badly ...
Replies: 36
Views: 4568

Re: Even old experienced drivers can mess up very badly ...

I believe the reproduction AC brakes will do that (ref advertisement on page 61 of "The Vintage Ford" Sep-Oct 2020 issue. I really, really, really wish they made these for large drums. You can’t beat the functionality at the price. I can tell you from my experience that if you ever drive with discs...
by Dan B
Tue Oct 20, 2020 9:03 am
Forum: General Discussion Forum
Topic: Nothing but a picture of my 27 coupe in the snow.
Replies: 12
Views: 2565

Re: Nothing but a picture of my 27 coupe in the snow.

Snow already??? Sure this picture wasn’t taken last year?

:o
by Dan B
Mon Oct 19, 2020 6:53 pm
Forum: Classifieds - Parts
Topic: All original 1913 touring for sale
Replies: 19
Views: 3395

Re: All original 1913 touring for sale

Cars seem to be for sale a lot longer around here. Hopefully a T person bought it and it resurfaces.
by Dan B
Mon Oct 19, 2020 4:35 pm
Forum: General Discussion Forum
Topic: Switching Gears
Replies: 5
Views: 1858

Re: Switching Gears

One burning question I have though is how do you switch back into low gear if you are already in high gear? And also, how do you regulate the speed once you are in high gear? Thank you. You just throttle down until the speed of the car matches low gear, and push the clutch pedal to the floor to re-...
by Dan B
Mon Oct 19, 2020 4:32 pm
Forum: General Discussion Forum
Topic: Switching Gears
Replies: 5
Views: 1858

Re: Switching Gears

FieldMarshalRed wrote:
Mon Oct 19, 2020 4:24 pm
One burning question I have though is how do you switch back into low gear if you are already in high gear? And also, how do you regulate the speed once you are in high gear? Thank you.
by Dan B
Sat Oct 17, 2020 8:40 pm
Forum: General Discussion Forum
Topic: Model t as a daily in the early 40s?
Replies: 50
Views: 6294

Re: Model t as a daily in the early 40s?

Great thread! Enjoying all of the stories.
by Dan B
Thu Oct 15, 2020 8:32 pm
Forum: General Discussion Forum
Topic: To Ruckstell or not to Ruckstell....that is the question
Replies: 24
Views: 4056

Re: To Ruckstell or not to Ruckstell....that is the question

Just plan on building it or REbuilding it. My Ruckstell was functional but I had to replace nearly every part during a recent rebuild. After that experience, I would never spend the money they usually bring for an original in unknown condition.
by Dan B
Thu Oct 15, 2020 8:10 pm
Forum: General Discussion Forum
Topic: To Ruckstell or not to Ruckstell....that is the question
Replies: 24
Views: 4056

Re: To Ruckstell or not to Ruckstell....that is the question

Once you have a Ruckstell it’s hard to go back. With the Ruckstell engaged and in Ford high gear, it’s like having the second gear the car was meant to have.
by Dan B
Thu Oct 15, 2020 12:41 pm
Forum: General Discussion Forum
Topic: Rust removal Evapo-Rust
Replies: 36
Views: 5646

Re: Rust removal Evapo-Rust

How do you get rid of rusty molasses?
by Dan B
Tue Oct 13, 2020 10:31 pm
Forum: Classifieds - Parts
Topic: Stevens/Walden tool catalogs update ...
Replies: 13
Views: 3162

Re: Stevens/Walden tool catalogs update ...

Everyone who was interested in a catalog, please check your e-mails. I have sent out e-mails to the first 25 folks that were interested in the catalogs. There were two more interested in catalogs than I have copies to send at this time. . After I get this run taken care of Ill be doing at least one...
by Dan B
Mon Oct 12, 2020 2:51 pm
Forum: General Discussion Forum
Topic: Another odd accessory intake manifold - ASKE
Replies: 2
Views: 1040

Re: Another odd accessory intake manifold - ASKE

Rich,

Our resident accessory expert Jay had one for sale a little while ago. There’s a newspaper ad included in the post.

https://mtfca.com/phpBB3/viewtopic.php?t=12105
by Dan B
Sat Oct 10, 2020 8:57 pm
Forum: General Discussion Forum
Topic: LOOK WHAT HAPPENED!
Replies: 10
Views: 3131

Re: LOOK WHAT HAPPENED!

Jonah - Have you bought the rainbow covered MTFCA books yet?
by Dan B
Sat Oct 10, 2020 6:02 am
Forum: General Discussion Forum
Topic: Cotter Pin Drilling Jig.
Replies: 13
Views: 2557

Re: Cotter Pin Drilling Jig.

Really really neat. I would put it to good use! You did good!
by Dan B
Wed Oct 07, 2020 12:20 pm
Forum: General Discussion Forum
Topic: Cotter pins tips
Replies: 23
Views: 3745

Re: Cotter pins tips

I put a needle nose pliars through the eye and roll it against the nut for leverage.
by Dan B
Sun Oct 04, 2020 12:40 pm
Forum: General Discussion Forum
Topic: ‘26-‘27 Brake Shoe Alignment
Replies: 12
Views: 2308

Re: ‘26-‘27 Brake Shoe Alignment

Can you see a place on the lining which shows more wear! If not concentric, the spot which is dragging should show more wear than the rest. Another thing to check is the edge of the shoe against the drum. You can usually detect this by finding a wear groove on the inner edge of the drum. This can h...
by Dan B
Sat Oct 03, 2020 12:34 pm
Forum: General Discussion Forum
Topic: ‘26-‘27 Brake Shoe Alignment
Replies: 12
Views: 2308

Re: ‘26-‘27 Brake Shoe Alignment

Thanks guys. Makes sense. Checking them for roundness will be my next step
by Dan B
Sat Oct 03, 2020 6:14 am
Forum: General Discussion Forum
Topic: ‘26-‘27 Brake Shoe Alignment
Replies: 12
Views: 2308

Re: ‘26-‘27 Brake Shoe Alignment

As it is now, there is enough play that I can move the shoes in the up or down direction and the linings will over hang the backing plate by an 1/8” or more. It seems to me that if the shoes can move by that much in the retracted position, they would rub on the drum without any chance of being recen...
by Dan B
Fri Oct 02, 2020 9:04 pm
Forum: General Discussion Forum
Topic: ‘26-‘27 Brake Shoe Alignment
Replies: 12
Views: 2308

‘26-‘27 Brake Shoe Alignment

I have a ‘23 with a large drum (‘26-‘27) Ruckstell. I discovered that the drivers side rear hub gets hot after driving. When I removed the wheel to investigate I found that the brake shoe is not being held concentric by the four tabs in the backing plate. There is a lot of play which is allowing the...
by Dan B
Thu Oct 01, 2020 6:54 am
Forum: General Discussion Forum
Topic: Nice weather at Hershey
Replies: 2
Views: 1206

Re: Nice weather at Hershey

I hope it rains buckets this year. We’ve been due for a week of rain.
by Dan B
Tue Sep 22, 2020 7:33 am
Forum: General Discussion Forum
Topic: Wilcox auction?
Replies: 19
Views: 2794

Re: Wilcox auction?

$5k for a 1915. Wow. Sure to upset a few folks here.
by Dan B
Mon Sep 21, 2020 5:58 pm
Forum: Classifieds - Parts
Topic: Wanted: Rear Spring Shackles
Replies: 5
Views: 1673

Re: Wanted: Rear Spring Shackles

All the thanks goes to you Mark for helping me out of a pinch! What a wonderful community we have here. Thanks MTFCA!
by Dan B
Sat Sep 19, 2020 9:31 pm
Forum: Classifieds - Parts
Topic: Wanted: Rear Spring Shackles
Replies: 5
Views: 1673

Re: Wanted: Rear Spring Shackles

Bump - Trying to find a set quick before it holds up reassembly!
by Dan B
Fri Sep 18, 2020 8:48 pm
Forum: General Discussion Forum
Topic: Sandblasting Equipment
Replies: 19
Views: 3203

Re: Sandblasting Equipment

Get an assortment of wire brushes, a good corded drill, and be done with it! A decent bench grinder with a wire wheel is also invaluable.

I did a frame off restoration on my car and never sandblasted one part.
by Dan B
Fri Sep 18, 2020 8:39 pm
Forum: Classifieds - Parts
Topic: Wanted: Rear Spring Shackles
Replies: 5
Views: 1673

Wanted: Rear Spring Shackles

I am looking for a pair of original rear spring shackles in NOS condition or with MINIMAL wear.

I will accept either the 1920-1923 forged L shape or ‘23-‘27 U shape designs as pictured below.

Please contact me via the email address below.
by Dan B
Thu Sep 17, 2020 11:15 am
Forum: General Discussion Forum
Topic: Model T stolen in Wisconsin
Replies: 7
Views: 2565

Re: Model T stolen in Wisconsin

Wow! The effort involved does not match the loot! Got to be more to that story.
by Dan B
Sun Sep 13, 2020 6:05 pm
Forum: General Discussion Forum
Topic: HALL SCOTT "Ruckstell" early BRASS SHIFT LOCK BODY
Replies: 5
Views: 1880

Re: HALL SCOTT "Ruckstell" early BRASS SHIFT LOCK BODY

That shifter lever is interesting. Wish they would have stuck with that design!
by Dan B
Tue Sep 01, 2020 10:32 am
Forum: General Discussion Forum
Topic: Does this look fine
Replies: 9
Views: 2987

Re: Does this look fine

As far as I know, those woodsworth grease springs are no longer being made. Is the prevailing opinion still that it’s a good idea to put them in even with the modern seals that are available?
by Dan B
Fri Aug 28, 2020 1:55 pm
Forum: General Discussion Forum
Topic: Model T prices down?
Replies: 9
Views: 2964

Re: Model T prices down?

A decent 1926 roadster pickup just sold for $21,175 on an online auction in Wi. Wood wheels, no options, older restoration. Whoda thunk it. We might have a goldmine. Your headline caught me... Model T prices and part prices are definitely on the rise. I disagree. https://mtfca.com/phpBB3/viewtopic....
by Dan B
Fri Aug 21, 2020 6:17 pm
Forum: General Discussion Forum
Topic: Where To Get Rims Hot Dip Galvanized
Replies: 14
Views: 2700

Re: Where To Get Rims Hot Dip Galvanized

How long do they look like bright like that? I assume over time they lose their luster sort of like a boat trailer does.
by Dan B
Thu Aug 20, 2020 8:18 pm
Forum: Classifieds - Vehicles
Topic: 1926 Touring-National winner-significant price reduction
Replies: 29
Views: 19503

Re: Stynoski winning car

Tom Hicks wrote:
Thu Aug 22, 2019 12:02 pm
This car has not sold??? Really? What does that say about the hobby? The seller couldn't have a nicer car or lower price. Incredible...
It says you better be in this hobby because you love these cars!
by Dan B
Wed Aug 19, 2020 11:00 am
Forum: General Discussion Forum
Topic: Has anyone seen this type of “Ford” logo key before?
Replies: 2
Views: 1357

Re: Has anyone seen this type of “Ford” logo key before?

I have a key fob, no key, from the Dearborn Inn which was built by Ford in the 1930s. Is it possible that is a room key?
by Dan B
Sun Aug 16, 2020 8:23 pm
Forum: OT - Off topic
Topic: What kind of pocket knife do you carry?
Replies: 21
Views: 3979

What kind of pocket knife do you carry?

For some reason, I recently became interested in carrying a pocket knife. It’s not something I grew up with. But I can see how it would be one of those things you couldn’t live without once you got in the habit. This forum cuts across all kinds of people so I figure there’s a lot of you who carry a ...
by Dan B
Thu Aug 13, 2020 8:21 pm
Forum: General Discussion Forum
Topic: Ruckstell Bearing/Bronze Plate (P211/P139) Fit
Replies: 17
Views: 6257

Re: Ruckstell Bearing/Bronze Plate (P211/P139) Fit

I’ve got to agree with you there. It might have nothing to do with why I got the bearing I did but it’s helpful to know the how’s and why’s behind the bearing designation if you’re out there searching in the wild for one. The SKF website is a great resource.
by Dan B
Thu Aug 13, 2020 10:21 am
Forum: General Discussion Forum
Topic: Rear Outer Hyatt Bearing Fit
Replies: 5
Views: 2435

Re: Rear Outer Hyatt Bearing Fit

Thanks guys. In your opinion, is there any harm in using a better bearing with a tighter fit if I can get them tapped into place? How tight is too tight? I figured they would wear in a little bit after use but I don’t want to cause any problems going down the road or not be able to get them out to s...
by Dan B
Wed Aug 12, 2020 8:38 pm
Forum: General Discussion Forum
Topic: Ruckstell Bearing/Bronze Plate (P211/P139) Fit
Replies: 17
Views: 6257

Re: Ruckstell Bearing/Bronze Plate (P211/P139) Fit

Ok, I've finally had a chance to get caught up and do some research. I'm by no means a bearing expert. Everything I've typed below can be found on the internet, but here it is all in one place: 1. 7212 is a industry designation for a single-row angular contact (thrust) ball bearing. It describes the...
by Dan B
Wed Aug 12, 2020 5:29 pm
Forum: General Discussion Forum
Topic: Rear Outer Hyatt Bearing Fit
Replies: 5
Views: 2435

Rear Outer Hyatt Bearing Fit

I am test fitting the rear axle outer bearings during a rebuild. I have new axles, new (“best quality”) bearing sleeves, and bearings that are essentially NOS. They do not just slide in like I am accustomed to and take small taps from a rubber mallet to fully seat them. When they are half way in, th...
by Dan B
Sat Aug 08, 2020 4:59 pm
Forum: General Discussion Forum
Topic: T tool at the flea market
Replies: 6
Views: 2743

Re: T tool at the flea market

Gotta save every orphan tool.
by Dan B
Wed Aug 05, 2020 10:23 pm
Forum: General Discussion Forum
Topic: I haven't seen Hap Tucker on here lately
Replies: 9
Views: 4184

Re: I haven't seen Hap Tucker on here lately

Count me as another who is happy to hear from you Hap. Glad to hear that life’s just a bit busy. In some ways that’s the best we can hope for.
by Dan B
Wed Aug 05, 2020 3:04 pm
Forum: Classifieds - Parts
Topic: Gas gauge accessory for sale.
Replies: 26
Views: 8329

Re: Gas gauge accessory for sale.

Hello Tim,

Just sent you an email.

Thanks,
Dan
by Dan B
Tue Aug 04, 2020 2:08 pm
Forum: General Discussion Forum
Topic: So why so little interest?
Replies: 39
Views: 11412

Re: So why so little interest?

One more thought...not having a title for the car is a deal killer for a lot of people who live in states with very strict vehicle registration laws. Ask anyone who has been through it.
by Dan B
Tue Aug 04, 2020 2:01 pm
Forum: General Discussion Forum
Topic: So why so little interest?
Replies: 39
Views: 11412

Re: So why so little interest?

There have been quite a few nice original cars for sale on the classifieds over the last couple of years. All of the asking prices are lower than what brass cars were bringing 10+ years ago. Quite frankly, I’m glad to see it as it allows a whole different group of buyers access to these cars. I did ...
by Dan B
Wed Jul 22, 2020 8:59 am
Forum: General Discussion Forum
Topic: Ruckstell Bearing/Bronze Plate (P211/P139) Fit
Replies: 17
Views: 6257

Re: Ruckstell Bearing/Bronze Plate (P211/P139) Fit

Thanks Mark.

Anyone want to tell me what they had for lunch yesterday?