Search found 277 matches
- Sun Apr 14, 2024 6:18 pm
- Forum: OT - Off topic
- Topic: Vintage power auction parts for old steam and other tractors etc.
- Replies: 0
- Views: 102
Vintage power auction parts for old steam and other tractors etc.
For those who like old tractors, steam and gas, Aumannauction.com has a listing located in Illinois that is selling lots of parts for vintage power applications. Lots of magnetos, oilers, tractor parts, gauges and stuff. None mine and no interest in it!
- Tue Mar 26, 2024 6:24 pm
- Forum: General Discussion Forum
- Topic: Has anyone ever driven their T across the Mighty Mac?
- Replies: 30
- Views: 1447
Re: Has anyone ever driven their T across the Mighty Mac?
The Mackinac Bridge is about five miles in total length, and it was the longest suspension bridge in the world when it was built. The outer lanes are covered, the two inner lanes are open grate, which allows the wind to pass through, helping stabilize it. It also lets snow fall through, reducing wei...
- Sat Jan 13, 2024 9:30 am
- Forum: General Discussion Forum
- Topic: Is there a need for rough sawn ash lumber for body framing?
- Replies: 12
- Views: 642
Re: Is there a need for rough sawn ash lumber for body framing?
Allan, by the time I’d get it ready to saw, it will have been dead on the stump for over a year. This will include some sub zero weather and temperatures over 100 degrees F. It should be fine if stacked properly for a while afterwards.
- Fri Jan 12, 2024 9:47 pm
- Forum: General Discussion Forum
- Topic: Is there a need for rough sawn ash lumber for body framing?
- Replies: 12
- Views: 642
Is there a need for rough sawn ash lumber for body framing?
This is going to be full of maybe’s and possibilities, but the story is that I live in west central Indiana, and I have a large, maybe 30” butt size, ash tree in my front yard that died last summer. It has probably two good sized logs in it that should be reasonably clear, no knots I am guessing. I ...
- Thu Dec 14, 2023 4:33 pm
- Forum: General Discussion Forum
- Topic: Dang fisheyes
- Replies: 17
- Views: 1053
Re: Dang fisheyes
If you are doing a base coat/clear coat finish, not allowing enough dry time for the base coat before doing the clear coat, can cause what is called pigment popping, where the base coat solvents come up thought the clear. They look just like fisheyes, but a totally different cause. Fisheye remover m...
- Sun Dec 10, 2023 9:17 pm
- Forum: OT - Off topic
- Topic: Vintage small engine projects.
- Replies: 18
- Views: 2285
Re: Vintage small engine projects.
Beautiful work, Mack! A whole lot of skill and patience shows in each engine! As far as fuel goes, 100ll avgas from your local airport will work well. It never goes bad, I’ve had some ten years and it’s as good as new. It has a very small amount of lead still in it for valves and seats. My airplane ...
- Tue Nov 07, 2023 8:42 am
- Forum: OT - Off topic
- Topic: Shop heat
- Replies: 18
- Views: 1380
Re: Shop heat
I have a combination of 96% efficient propane furnace, 80,000 btu, and a 2-1/2 ton heat pump in my 30x48’ garage in central Indiana. The furnace uses a 2” exhaust plastic pipe, and if you need, the intake air for the furnace burner can also go to the outdoors. In my case, because the building is one...
- Tue Sep 26, 2023 7:57 pm
- Forum: OT - Off topic
- Topic: Anyone collect early bicycles?
- Replies: 12
- Views: 929
Re: Anyone collect early bicycles?
My brother, who lives on the east side of Dayton Ohio, has two 54” high wheel bikes that he would sell. One is an 1888 or so English made Singer, that is what I would call a semi racer. It is light weight by the standards of the day, about 38 pounds if I remember right versus normal of upper forties...
- Sat Jul 15, 2023 3:05 pm
- Forum: General Discussion Forum
- Topic: What have you done with your chapter in July?
- Replies: 23
- Views: 1789
Re: What have you done with your chapter in July?
Dallas, will it hold your ice cream?
- Mon Jul 03, 2023 5:29 pm
- Forum: General Discussion Forum
- Topic: Pulling a Model T
- Replies: 41
- Views: 2942
Re: Pulling a Model T
In reference to my comment about the u-joint being disconnected or removed, I know the driveshaft was disconnected somehow from the engine, but I’m not sure how it was done. I was seven years old at the time, and remember my dad had to go underneath and connect something, but I don’t know what. I su...
- Sun Jul 02, 2023 4:51 pm
- Forum: General Discussion Forum
- Topic: Pulling a Model T
- Replies: 41
- Views: 2942
Re: Pulling a Model T
In 1959, my dad moved us from Azalia In. To Utica Ny. We flat towed my late grandfathers 1925 Coupe behind a 1958 Plymouth the entire way. My dad and uncle designed and built a tow bar that attached to the front axle and radius wishbone. It allowed for up and down movement. The u-joint was disconnec...
- Sat Apr 15, 2023 8:29 am
- Forum: OT - Off topic
- Topic: 1912 Christie fire truck on govdeal.com
- Replies: 10
- Views: 1527
Re: 1912 Christie fire truck on govdeal.com
Sold, $312,900 including buyers penalty!
- Thu Apr 06, 2023 6:02 pm
- Forum: OT - Off topic
- Topic: 1912 Christie fire truck on govdeal.com
- Replies: 10
- Views: 1527
1912 Christie fire truck on govdeal.com
Those of you interested in old fire trucks might be interested in a 1912 Christie listed for sale in the govdeals.com auction website, under automobiles custom classic. Price right now is at $56,000! Plus a percentage buyers penalty. Not mine and no interest in it! Located in Boston, Ma. The same li...
- Mon Apr 03, 2023 5:42 am
- Forum: General Discussion Forum
- Topic: Tornado's
- Replies: 13
- Views: 1608
Re: Tornado's
I’m in the Spencer Indiana area, and while my house and property are undamaged except for limbs down, the state park I work at was hit very badly. Our campgrounds are totally destroyed, and sadly, two campers lost their lives. The night security man got word early enough to get people out of their c...
- Sat Mar 25, 2023 11:46 am
- Forum: OT - Off topic
- Topic: Stiicker for my T?
- Replies: 3
- Views: 751
Re: Stiicker for my T?
Triumph TR 3A’s, mid fifties until 1963. They did pioneer collapsible steering columns. I’ve got a TR3B, and a TR4A, as well as the two T’s.
- Fri Mar 24, 2023 6:25 pm
- Forum: General Discussion Forum
- Topic: I hate when that happens.
- Replies: 21
- Views: 2037
Re: I hate when that happens.
In Bloomington Indiana, until the early to mid 1990’s, the Ford dealership was in the same building from the model T era and it had high ceilings and a steep car ramp to the second floor. The ramp went up along the south wall, and had the winch that was used to pull the cars up it to get to the serv...
- Fri Mar 10, 2023 6:47 pm
- Forum: OT - Off topic
- Topic: Tool Time
- Replies: 108
- Views: 11146
Re: Tool Time
Greetings, Scott. I have a small collection of obscure taps and dies that I use in restoring antique bicycles, from the 1880’s and 90’s. There were few standard threads in use then, either in threads per inch or diameter. There were a number of manufacturers of bicycle t&d sets. Columbia high wheels...
- Mon Jan 23, 2023 7:39 pm
- Forum: General Discussion Forum
- Topic: Did any one get a similar email?
- Replies: 17
- Views: 1675
Re: Did any one get a similar email?
Gee, I didn’t get the message! To whom do I complain! I work for the state of Indiana, and have one of their computers, so I have to take classes almost constantly on how to avoid scams, identity theft, phishing, and every other evil thing the bad guys can try!
- Fri Dec 23, 2022 7:41 pm
- Forum: General Discussion Forum
- Topic: Flat towing a T
- Replies: 14
- Views: 1760
Re: Flat towing a T
In 1959, my dad flat towed our 25 coupe from Columbus Indiana to Utica NY. The universal joint was removed, or the pinon gear, not sure which. It was towed using a tow bar setup that clamped to the front axle and the wishbone. I still have it. We towed it with a 58 Plymouth. I don’t remember any tai...
- Thu Dec 01, 2022 3:41 pm
- Forum: General Discussion Forum
- Topic: Blockley Tires
- Replies: 39
- Views: 3187
Re: Blockley Tires
I thought I remembered seeing rim repair metal strips being sold. They were/are a folded steel strip, formed into a circle that you were or are supposed to fit over the sharp lip of the rim, and then weld or braze it on. I have never seen it in use, but the idea seemed like it could work to save an ...
- Sat Nov 19, 2022 8:41 pm
- Forum: OT - Off topic
- Topic: Motorcycle Gas Tank Old Sealer Coming off (Honda CB77)
- Replies: 2
- Views: 581
Re: Motorcycle Gas Tank Old Sealer Coming off (Honda CB77)
I have used MEK to soften and remove some sealers. Acetone will also work on some sealers. If you can get a chip out, try seeing what will soften it. When what works is found, seal the drains and pour in the remover. Let it soak, and pour the whole mess out. Ventilate the tank well, compressed air t...
- Sat Nov 05, 2022 3:42 am
- Forum: General Discussion Forum
- Topic: What have you done with your Model T in November?
- Replies: 55
- Views: 5519
Re: What have you done with your Model T in November?
Dallas, is that muffler your secret advantage when racing the Amish in the TT?! How’s the racing series going? Inquiring minds want to know!
- Tue Oct 11, 2022 9:30 pm
- Forum: OT - Off topic
- Topic: Rubber based Metal roof sealant. Recommendations?
- Replies: 4
- Views: 856
Re: Rubber based Metal roof sealant. Recommendations?
Searched the web, found EPDM Coatings, liquid rubber roof sealer, in the five gallon pail they list red roof tile color. For some reason, they only list black and white in smaller amounts. No idea if this is what you are looking for, but it seems close! They sell direct to the customer, not thru sto...
- Tue Sep 27, 2022 8:51 pm
- Forum: General Discussion Forum
- Topic: Can anyone tell me what this set of Dertz lamps fit?
- Replies: 8
- Views: 1396
Re: Can anyone tell me what this set of Dertz lamps fit?
I would guess them to be more modern than WW1, more like Ww2 instead. Night flight was pretty limited in World War One, and there was little need to avoid being seen from above. World War Two was a much different story, and oil lamps were used in the European theater quite a bit. Oil was much easier...
- Thu Sep 22, 2022 5:33 pm
- Forum: General Discussion Forum
- Topic: Dean, I’m heading your way……. With a 300 c.i. Model T motor…
- Replies: 8
- Views: 1710
Re: Dean, I’m heading your way……. With a 300 c.i. Model T motor…
Rob, what’s the crankshaft condition as far as straight, and uncracked at the flange? Does it use through bolts and nuts? It’s hard to tell from the photos but it doesn’t look that bad. The dowel pins are worn, but reaming/boring the holes just slightly should work. Not unheard of to make a stepped ...
- Sun Sep 18, 2022 1:56 pm
- Forum: General Discussion Forum
- Topic: AACA Hershey Fall Meet Tues Oct 4 –Fri, Oct 7 2022
- Replies: 32
- Views: 4709
Re: AACA Hershey Fall Meet Tues Oct 4 –Fri, Oct 7 2022
Is set up day on Monday instead of Tuesday this year? I like to go on set up day so I can ride a bicycle from field to field and check the venders as they unpack!
- Wed Sep 14, 2022 3:41 pm
- Forum: OT - Off topic
- Topic: 1921 Mack truck for sale
- Replies: 8
- Views: 1968
Re: 1921 Mack truck for sale
Yes, that’s it! I don’t know anything about it, just saw the listing and thought there might be people on this site who might be interested or know someone who is.
- Wed Sep 14, 2022 12:10 pm
- Forum: OT - Off topic
- Topic: 1921 Mack truck for sale
- Replies: 8
- Views: 1968
1921 Mack truck for sale
Listed on auction site Govdeals.com under automobiles classic/custom is a 1921 Mack truck. Not mine and no interest in it . Add says it runs. Nice looking truck if you need it!
- Mon Sep 12, 2022 6:11 pm
- Forum: OT - Off topic
- Topic: Signs I Used To See
- Replies: 10
- Views: 1471
Re: Signs I Used To See
See Rock City, Burma Shave, Chew Mail Pouch, Sinclair, Esso, Mercury, Plymouth, Oldsmobile, Pontiac, Saturn, Rambler
- Sun Sep 11, 2022 9:03 am
- Forum: General Discussion Forum
- Topic: On the road again .. Dave is home so journey ends, but...
- Replies: 63
- Views: 7230
Re: On the road again .. Steve Jelf is here. The continuing story
Looking at the radar this morning, you are going to need the top today! Plus a wiper, or some rainx for the windshield!
- Sun Sep 11, 2022 4:02 am
- Forum: General Discussion Forum
- Topic: On the road again .. Dave is home so journey ends, but...
- Replies: 63
- Views: 7230
Re: On the road again .. Steve Jelf is here. The continuing story
Dave, sorry I missed your calls, as you went through Spencer! Sounds like a great trip! Have you considered going northwest to Ludington, Mi. and catching the ferry across the lake to Manitowoc, and then South? Less traffic than Chicago! Safe travels! I have been to the OCF many times, but always wi...
- Sat Sep 03, 2022 7:53 pm
- Forum: General Discussion Forum
- Topic: On the road again .. Dave is home so journey ends, but...
- Replies: 63
- Views: 7230
Re: On the road again .. Steve Jelf, when are you leaving to OCF?
Dave, I live about thirty miles west of Bloomington. If you need help with anything, 812 821 8294 will reach me. If I don’t answer, leave a voicemail. Or text me.
- Sat Sep 03, 2022 1:08 am
- Forum: OT - Off topic
- Topic: Tool Time
- Replies: 108
- Views: 11146
Re: Tool Time
Check Govdeals.com for auctions of machine tools and about anything else you might need. Some bargains, some not, but lots of lathes, and mills on most of the time. Every type from basic to cnc! This is an auction service for state and federal agencies that have surplus items. Be sure to check all r...
- Sun Aug 28, 2022 8:05 pm
- Forum: General Discussion Forum
- Topic: Opinion: Brake apostacy
- Replies: 44
- Views: 4349
Re: Opinion: Brake apostacy
You can argue the need for either auxiliary brakes or at the very least good working emergency brakes, but I have lived it! In my 25 coupe, on a hilly state park road leading straight to a parking lot and water fall, it suffered a complete pinion bearing failure, losing two teeth from the pinion gea...
- Wed Aug 17, 2022 8:50 pm
- Forum: General Discussion Forum
- Topic: Repacked the front bearings and have some questions.
- Replies: 13
- Views: 1798
Re: Repacked the front bearings and have some questions.
The old type grease, in use in the early part of the last century was a paraffin based grease that would or could under higher heat, melt and run into the bearing. Or at least that was the theory. It could also be of a fibrous type as well. In 1959, my parents, with four children, and our dog, were ...
- Sun Jul 31, 2022 8:34 pm
- Forum: General Discussion Forum
- Topic: Thank you all for the well wishes
- Replies: 21
- Views: 1761
Re: Thank you all for the well wishes
My guess is an explosion that blew the car to pieces, and blowing the glass out of, and causing puncture damage to surrounding cars as well. No telling what blew up! Dynamite, a large boiler? Whatever it was, it had a lot of power!
- Sat Jul 23, 2022 11:55 am
- Forum: General Discussion Forum
- Topic: No one listened
- Replies: 32
- Views: 3253
Re: No one listened
If you want to experience the no car, horses and bicycles only lifestyle, go to Mackinac Island, Michigan in the summer. While they clean the poop up quickly during the day, and scrub the roads overnight, there is still essence of horse lingering along with the smell of fudge. Fun to visit!
- Sun Jul 10, 2022 8:33 pm
- Forum: General Discussion Forum
- Topic: Old Car Festival registration ends soon!
- Replies: 3
- Views: 724
Old Car Festival registration ends soon!
A reminder, registration for the Old Car Festival closes July 15th, so if you are still making up your mind, do it soon!
- Sun Jul 10, 2022 5:17 pm
- Forum: General Discussion Forum
- Topic: What have you done with your model T in July?
- Replies: 58
- Views: 7133
Re: What have you done with your model T in July?
After almost 4 years, I got my 27 depot hack started. Added fuel, a little coolant, pulled the plugs, oiled the cylinders and cranked it over a bit, checked the coils, replaced two, put the plugs back, turned the gas on, and it started pretty easily. Now to dig it out of the stuff surrounding it, ch...
- Tue Jun 28, 2022 8:08 pm
- Forum: General Discussion Forum
- Topic: A view of yesterday
- Replies: 16
- Views: 2404
Re: A view of yesterday
Number 14 appears to be converted to a starter unit for the airplane behind it, using belts. I had seen the ww1 units that engage to the propeller but not a belt drive to the rear of the engine?
- Sun Jun 26, 2022 4:46 pm
- Forum: General Discussion Forum
- Topic: 27 Coupe door glass install
- Replies: 11
- Views: 1772
Re: 27 Coupe door glass install
I buy 3M urethane windshield sealer at the local Napa for about $20.00 for a caulking tube size. It will glue the window in forever! Bad part is that the tube is hard to re seal so you need to use as much as you can all the same time. This is the heavy black goo that modern windshields are installed...
- Fri Jun 17, 2022 7:12 pm
- Forum: OT - Off topic
- Topic: 50 Years and she hasn't thrown me out!
- Replies: 13
- Views: 2095
Re: 50 Years and she hasn't thrown me out!
Congratulations, to the wife and you! Hope you had a great day! We are headed for our 49th in August, and my wife has encouraged me getting the 46 Ercoupe flying again, after 26 years apart in the garage. It flew again last of April! I think we both have “keepers”!
- Fri May 06, 2022 5:35 am
- Forum: General Discussion Forum
- Topic: Paint Color for Wire Wheels
- Replies: 12
- Views: 1805
Re: Paint Color for Wire Wheels
I went to the local rural king farm store, and bought yellow and white implement paint plus hardener for it. The wheels were sandblasted and primed. I mixed two parts yellow to one part white, plus the hardener, and they came out very well. The hardener makes it take a lot longer to dry hard, but th...
- Wed Apr 06, 2022 9:57 pm
- Forum: General Discussion Forum
- Topic: Stan Howe auction of parts of collections
- Replies: 10
- Views: 3856
Re: Stan Howe auction of parts of collections
I went through most of the listings and saw lots of T parts, plus his 27 Coupe. There are lots of frames, engines and parts, rear axles, wheels etc. plus fenders, radiator, what appears to be a truck conversion frame.
- Tue Feb 22, 2022 12:28 pm
- Forum: General Discussion Forum
- Topic: Who makes T tire specifications for manufacturing?
- Replies: 10
- Views: 1667
Who makes T tire specifications for manufacturing?
I would like to know who, if anyone knows, draws up the specific manufacturing details on what the company in Vietnam makes? How do our everyday suppliers know what the specific information on design is? Does that company or companies just build whatever they want and put it up for sale, or does a w...
- Sat Feb 12, 2022 10:12 am
- Forum: General Discussion Forum
- Topic: 1927 Coupe Visor Cover Replacement
- Replies: 14
- Views: 2063
Re: 1927 Coupe Visor Cover Replacement
If you have an Amish harness maker they can sew it for you, like they do on a buggy dashboard.
- Tue Feb 08, 2022 7:57 pm
- Forum: OT - Off topic
- Topic: Close encounters of the third kind
- Replies: 13
- Views: 2638
Re: Close encounters of the third kind
Modern lights are very much brighter than the old incandescent bulbs. First came the HID bulbs or high intensity discharge, which were both factory installed and available aftermarket. They are available in divergent heat range or color range from the old yellow, to intense white, or blue. With Next...
- Tue Feb 01, 2022 5:13 pm
- Forum: OT - Off topic
- Topic: Bob had his Rant now it's my turn!
- Replies: 6
- Views: 1889
Re: Bob had his Rant now it's my turn!
Some female is giving out my cell number as hers, to all kinds of telemarketers etc. When they call and ask for her, I tell them she died of Covid which slows them down for a while. Once I recognized a repeat caller for her and answered “Mabel’s whorehouse” which made them stutter a second, then the...
- Sat Jan 08, 2022 11:15 am
- Forum: General Discussion Forum
- Topic: Front Wheel Bearings
- Replies: 22
- Views: 2895
Re: Front Wheel Bearings
Model t and anything with drum front brakes, the bearings run loose compared to anything with disc brakes. Model t and drum are allowed to run loose to the point of having slight movement when the wheel is moved top to bottom or side to side-not much but a little. Disc brakes can’t because movement ...
- Sun Jan 02, 2022 9:37 pm
- Forum: Classifieds - Parts
- Topic: WTB 26-27 Coupe/Tudor Dash
- Replies: 4
- Views: 1257
Re: WTB 26-27 Coupe/Tudor Dash
If you can’t find a better one, I have a dash that does have two small holes below and to the left of the steering column as I remember. It’s been a while since I’ve looked at it! I can take a photo and email it to you if you would like. $30.00 plus shipping, or pick up about 40 miles east of Terre ...
- Sat Jan 01, 2022 4:25 pm
- Forum: General Discussion Forum
- Topic: So I guess my Model T made a trip to Texas without me!
- Replies: 15
- Views: 2565
Re: So I guess my Model T made a trip to Texas without me!
Wadda yah know, your cars are at least a hundred years advanced, being self driving! Maybe ya need to rope and hogtie them or chain ‘‘em to a tree to keep ‘‘em home? Have they sent yah the gasoline bills for all these travels? That’ll hurt your hip pocket!!!
- Wed Dec 22, 2021 9:58 pm
- Forum: General Discussion Forum
- Topic: Family Fords on Touring Tuesday
- Replies: 7
- Views: 1221
Re: Family Fords on Touring Tuesday
I wonder how many of these great photographs were taken with Kodak box brownie cameras, that made home photography affordable and easy enough for any amateur to take good pictures? Our future generations are going to lose most of their photo history when their digital records are lost, formats chang...
- Thu Nov 25, 2021 7:35 am
- Forum: General Discussion Forum
- Topic: Ellipitical Springs and Axle Whatizit?
- Replies: 10
- Views: 2006
Re: Ellipitical Springs and Axle Whatizit?
As I said, the wishbone prevents side to side movement. Through triangulation, the axle can’t move side to side, just pivot at the pan mount. If you mount the panhard bar parallel to the axle, it minimizes any induced movement. Dodge 4x4 trucks with solid axles and coil springs have used them for ye...
- Wed Nov 24, 2021 8:30 pm
- Forum: General Discussion Forum
- Topic: Ellipitical Springs and Axle Whatizit?
- Replies: 10
- Views: 2006
Re: Ellipitical Springs and Axle Whatizit?
I don’t think that front suspension is going to be as poor handling as has been suggested. The wishbone will keep it centered and prevent side to side movement, the other springs appear heavy enough to not have that much bounce and rebound with a light weight T body and engine. There is not that muc...
- Sun Nov 21, 2021 8:33 pm
- Forum: General Discussion Forum
- Topic: Tag on engine block
- Replies: 5
- Views: 1403
Re: Tag on engine block
Fairly modern rebuilders tag that tells them if the engine or head has been too hot, voiding the warranty. The center of the tab melts out at a specific temperature, so they can tell at a glance if it’s been hotter than it should have been. Used a lot in the nineties and up, maybe earlier.
- Sun Nov 14, 2021 2:08 pm
- Forum: General Discussion Forum
- Topic: Gypsy Curtain fasteners
- Replies: 9
- Views: 2115
Re: Gypsy Curtain fasteners
I would think a marine service that makes boat side curtains could make something like that without too much trouble. Materials are available on greed-bay. I have been studying them for an enclosure for my depot hack. Moss motors British car parts used to have the lift a dot parts, but I have not lo...
- Fri Nov 12, 2021 7:27 pm
- Forum: General Discussion Forum
- Topic: Question re Diode Cutout…
- Replies: 10
- Views: 1733
Re: Question re Diode Cutout…
It will work for either, just reverse the terminals. As long as current goes from the generator to the battery when the generator is turning, and none goes back into it when it is stopped, life is good! A diode is simply an electronic device that only lets current go through in one direction. No mov...
- Mon Nov 01, 2021 12:31 pm
- Forum: General Discussion Forum
- Topic: Sudden Magneto Failure
- Replies: 23
- Views: 2925
Re: Sudden Magneto Failure
Timing gear?
- Thu Oct 14, 2021 3:02 pm
- Forum: General Discussion Forum
- Topic: Tire that are in stock
- Replies: 10
- Views: 1957
Re: Tire that are in stock
It has been my experience as one who did front end alignment for forty five years, including the era when radials took over from bias tires, that it takes a good bit more caster in the front end to make radials handle right on a car designed for bias tires. Unfortunately, model T’s have limited cast...
- Sat Oct 02, 2021 9:16 am
- Forum: OT - Off topic
- Topic: JUST PLAIN NUTS!
- Replies: 7
- Views: 2251
Re: JUST PLAIN NUTS!
Hope they didn't eat the wiring while they were in there! Soybean based insulation on the wires really attracts them, and it can be very expensive to fix!
- Sun Sep 26, 2021 7:41 pm
- Forum: General Discussion Forum
- Topic: Trying to trace a short. ??
- Replies: 4
- Views: 1092
Re: Trying to trace a short. ??
Easy way to find a short that has worked for me for 45 years is to disconnect one battery cable, it doesn't matter which one, connect a test light between the cable and the battery terminal. Replace any bad fuses. If the light comes on, there is a draw on the battery, so you disconnect one circuit a...
- Sun Sep 19, 2021 2:14 pm
- Forum: General Discussion Forum
- Topic: Model t skis ?
- Replies: 5
- Views: 1667
Re: Model t skis ?
Looks like a bare rim would fit in the slot with the center bolt fitting through the valve stem hole on the rim and wheel.
- Sat Sep 18, 2021 10:45 pm
- Forum: General Discussion Forum
- Topic: Odd request
- Replies: 17
- Views: 2668
Re: Odd request
I would worry about boiler condition and owner/operator knowledge about it. A friend who was a state of Indiana boiler inspector said he wouldn't go near one that was operating for that reason. He said there are no inspections done on those boilers, and many had not had tubes replaced in years if ev...
- Sat Sep 11, 2021 8:29 pm
- Forum: General Discussion Forum
- Topic: What is this canister?
- Replies: 6
- Views: 1719
Re: What is this canister?
Looks like three kerosene road flare safety burner?
- Thu Sep 09, 2021 6:43 pm
- Forum: General Discussion Forum
- Topic: Paint
- Replies: 22
- Views: 3641
Re: Paint
The single stage, acrylic enamel is the simplest and cheaper way to go. If you want, you can add an acrylic hardener to it, that slows how fast it dries, adding flow out time, but more "dust collecting" time, and it hardens the paint, adding gloss and chip resistance to it. You must wear a good resp...
- Fri Sep 03, 2021 1:43 pm
- Forum: Classifieds - Parts
- Topic: SOLD : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
- Replies: 7
- Views: 2058
Re: FOR SALE : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
Richard, the gear made it here today, in great shape! Thanks, and the check will go out tomorrow! Have a great Labor Day weekend!
- Sun Aug 29, 2021 8:02 am
- Forum: General Discussion Forum
- Topic: Tire change tool, what do you use?
- Replies: 25
- Views: 3190
Re: Tire change tool, what do you use?
I take the rim and tire to a tire shop that has the type changer that squeezes the bead against the side of the machine to break it down. I have him break both sides down all the way around. Then lay the tire out in the sun to soften it as much as it will, before starting the removal. I lube the rim...
- Fri Aug 27, 2021 8:48 pm
- Forum: General Discussion Forum
- Topic: Masks required even outside at OCF
- Replies: 2
- Views: 1224
Masks required even outside at OCF
From what my wife looked up, masks will be required inside and out, and social distancing is to be maintained at all times while in the village. Masks are not to be removed, even for photos! So bring your masks, and be prepared to wear them!
- Thu Aug 26, 2021 4:20 am
- Forum: Classifieds - Parts
- Topic: SOLD : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
- Replies: 7
- Views: 2058
Re: FOR SALE : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
Thanks! As soon as I get the total, and your address I'll get a check on the way! Bill
- Wed Aug 25, 2021 12:24 pm
- Forum: Classifieds - Parts
- Topic: SOLD : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
- Replies: 7
- Views: 2058
Re: FOR SALE : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
Shipping address is:Bill Dizer, 4140 Bandy Rd., Poland, In., 47868 if you need it to figure shipping cost. Thanks!
- Mon Aug 23, 2021 5:14 pm
- Forum: Classifieds - Parts
- Topic: SOLD : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
- Replies: 7
- Views: 2058
Re: FOR SALE : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
Still want it, but have not heard from you? Is it still for sale? I sent an email through your contact information.
- Fri Aug 20, 2021 3:16 pm
- Forum: Classifieds - Parts
- Topic: SOLD : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
- Replies: 7
- Views: 2058
Re: FOR SALE : STEWART SPIRAL SPEEDOMETER WHEEL GEAR FOR WIRE WHEEL, $75 PLUS SHIPPING
I will take it! Let me know how to pay you! Bill Dizer email bjdizerathughesdotnet.net Change at to@ or 812-821-8294, leave message message if I don't answer! Thanks
- Wed Aug 18, 2021 12:20 pm
- Forum: General Discussion Forum
- Topic: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op
- Replies: 30
- Views: 3645
Re: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op
Califunyland may not have enough water left to fill the boiler and tender!
- Wed Aug 18, 2021 4:19 am
- Forum: General Discussion Forum
- Topic: Old Car Festival arrival time sign up
- Replies: 3
- Views: 976
Re: Old Car Festival arrival time sign up
The OCF sent me two acceptance emails and in the second one there was a link to click on that takes you to a sign up page where you select what time you want to get there. The email was titled OCF 2021 check in. You enter your name as it is on your registration and your email address for that specif...
- Tue Aug 17, 2021 11:40 pm
- Forum: General Discussion Forum
- Topic: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op
- Replies: 30
- Views: 3645
Re: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op
Is that the same type engine that they have in the Henry Ford museum? Looking at any of them, and remembering they were made before the days of computer design and were done on drawing boards one page at a time is amazing and humbling!
- Tue Aug 17, 2021 11:25 pm
- Forum: General Discussion Forum
- Topic: Old Car Festival arrival time sign up
- Replies: 3
- Views: 976
Old Car Festival arrival time sign up
I received my acceptance emails for the Old Car Festival, and in the fine print, there is a link to choose your arrival sign up time. They are very time specific, so you need to check when you can be there and sign up soon. They have, by my count, 1100 slots to choose from, starting Thursday and goi...
- Tue Aug 17, 2021 11:17 pm
- Forum: Classifieds - Parts
- Topic: Old Car Festival sign in arrival times sign up
- Replies: 1
- Views: 806
Re: Old Car Festival sign in arrival times sign up
Sorry, wrong forum, I'll add one there too.
- Tue Aug 17, 2021 11:14 pm
- Forum: Classifieds - Parts
- Topic: Old Car Festival sign in arrival times sign up
- Replies: 1
- Views: 806
Old Car Festival sign in arrival times sign up
I received my acceptance notices for the Old Car Festival by email today (antique bicycles) and in the fine print there is a link to sign up for your admission package pick up, and it is very time specific. There are plenty of open slots for all hours, starting on Thursday until noon Saturday but I ...
- Mon Aug 09, 2021 6:00 am
- Forum: General Discussion Forum
- Topic: 1912 Fan Belt problems !!
- Replies: 12
- Views: 1896
Re: 1912 Fan Belt problems !!
You might try turning the belt inside out and running the flat side on the pulleys, not the multi groves, and not running it too tight.
- Sun Aug 08, 2021 9:16 pm
- Forum: General Discussion Forum
- Topic: Misaligned front wheel, no thread left on tie rod?
- Replies: 30
- Views: 2930
Re: Misaligned front wheel, no thread left on tie rod?
One question, how true are the tires and wheels? When you jack up each wheel and spin it, how much side to side runout is there? If there is much at all, it can sure change the apparent toe on the front end. You need to find the true center of the tire front and rear before you measure toe. You can ...
- Wed Jul 21, 2021 6:14 am
- Forum: General Discussion Forum
- Topic: New to Hershey
- Replies: 18
- Views: 2974
Re: New to Hershey
Set up day, Tuesday, riding a bike is allowed, so I have brought one to cruise the place and buy from venders as they set up. Even if they are not selling right then, knowing where to go the next morning helps. The claim was that there are almost thirty miles of venders if you walk both sides of eve...
- Mon Jul 19, 2021 5:29 am
- Forum: General Discussion Forum
- Topic: Brand new LLC filed in Noble county, Indiana T related
- Replies: 5
- Views: 1437
Re: Brand new LLC filed in Noble county, Indiana T related
So, what is the fee structure? Do you charge by the person, or the pound? If by the pound, is it before or after ice cream?
- Mon Jul 12, 2021 10:34 pm
- Forum: General Discussion Forum
- Topic: What have you done with your T in July
- Replies: 88
- Views: 9592
Re: What have you done with your T in July
Darn, I thought that would work! Maybe you will have to increase the bait to T-bone steaks, and a case of cold beer! You might also think about mentioning it to the target people? Make sure you have enuff parking!
- Mon Jul 12, 2021 12:29 pm
- Forum: General Discussion Forum
- Topic: What have you done with your T in July
- Replies: 88
- Views: 9592
Re: What have you done with your T in July
Dennis, have you considered setting out a couple of bags of M&M's and boxes of twinkies to see if you can attract help?
- Fri Jul 02, 2021 8:56 pm
- Forum: OT - Off topic
- Topic: Interesting auction
- Replies: 2
- Views: 1530
Interesting auction
There is an auction going on at batorclassicauctions.com selling the Ernie Harmon estate. There are a few model t items including a rough brass radiator and parts, brass headlights, many bike lamps, several wood rim bicycles, much early motorcycle parts, mostly Harley and Indian. Also machine tools ...
- Sat Jun 19, 2021 8:57 pm
- Forum: OT - Off topic
- Topic: Seen it all?
- Replies: 14
- Views: 3735
Re: Seen it all?
A political promise delivery system!
- Sun Jun 13, 2021 10:17 pm
- Forum: General Discussion Forum
- Topic: 1910 Ford racer - first start in two years
- Replies: 22
- Views: 4079
Re: 1910 Ford racer - first start in two years
Rob, Just curious, you said the cylinders had scoring. Did you have to bore them or sleeve them? Did the lower ports contribute to the overheating by running hot exhaust down and out the bottom of the cylinders instead of out the valves where there is presumably more cooling? It would seem to me tha...
- Mon Jun 07, 2021 6:26 pm
- Forum: General Discussion Forum
- Topic: picture quiz of generator armatures
- Replies: 9
- Views: 1732
Re: picture quiz of generator armatures
Bottom one in the last photo appears to have thrown a commutator segment out, which would ruin it?
- Wed Jun 02, 2021 8:04 pm
- Forum: OT - Off topic
- Topic: Want to buy a motor home, but, which one?
- Replies: 11
- Views: 2907
Re: Want to buy a motor home, but, which one?
In Indiana, regular license plates are only about $20.00 more a year than the highly restrictive (but rarely enforced) antique plates. With the regular plate, you can drive it any time and any where you care, without any questions. My insurance company does not care either. An added bonus is that th...
- Sun May 30, 2021 8:29 am
- Forum: General Discussion Forum
- Topic: Flat feeling TT
- Replies: 27
- Views: 4102
Re: Flat feeling TT
Dallas, a squirt of dishwashing soap in a gallon milk jug, and poured over the tube helps. A fuzz is bubbles from the soap is easier to see. I've repaired tires for 45 years.
- Fri May 28, 2021 12:50 pm
- Forum: General Discussion Forum
- Topic: Flat feeling TT
- Replies: 27
- Views: 4102
Re: Flat feeling TT
Horse shoe nails?
- Fri May 14, 2021 11:05 pm
- Forum: General Discussion Forum
- Topic: What have you done with your T in May
- Replies: 70
- Views: 12442
Re: What have you done with your T in May
Dallas, looking at your door, have your racing opposition started getting rough?!! Reminds me of the old joke: What goes clip clop, clip clop, clip clop, bang bang, clip clop, clip clop, clip clop? An Amish drive by shooting!
- Thu May 06, 2021 9:23 pm
- Forum: General Discussion Forum
- Topic: Key stuck: How to get it out?
- Replies: 12
- Views: 2285
Re: Key stuck: How to get it out?
As Steve said, use a large set of dyke type wire cutters, grab the key by the sides of the end, clamp tight on it and lever the dyke's up and the key will come out, usually without much of a fight. I've been doing that for years!
- Sat Apr 17, 2021 3:30 pm
- Forum: OT - Off topic
- Topic: Identify, please ?
- Replies: 18
- Views: 4411
Re: Identify, please ?
Could it be a Mitchell? The implement dealer in the back ground sold Mitchell wagons, and Mitchell made cars too. I found a reference to a 1910 Mitchell and the hub caps and wheels/rear brake drum look the same, as well as the hood/radiator.
- Sat Apr 17, 2021 8:18 am
- Forum: General Discussion Forum
- Topic: My apologies
- Replies: 53
- Views: 7294
Re: My apologies
Steve, you expressed your opinion, as you are fully entitled to do. The other readers have the right to disagree, but that does not make you wrong. If your opinion makes them mad, so be it. Nowhere did I see you trying to make a ruling that only you were correct! I saw what appeared to me to be an o...
- Tue Apr 13, 2021 5:36 pm
- Forum: Classifieds - Parts
- Topic: WTB Stromberg MB-1 choke assy
- Replies: 3
- Views: 1069
Re: WTB Stromberg MB-1 choke assy
Still looking for choke assy for the carb! Thanks
- Fri Apr 02, 2021 9:12 pm
- Forum: OT - Off topic
- Topic: Value of Cushman Engine-Model C, 4 hp (Binder engine?)
- Replies: 24
- Views: 5975
Re: Value of Cushman Engine-Model C, 4 hp (Binder engine?)
David, did you see the photo of the model t sales vehicle selling the Cushman binder engines, with an engine mounted on the rear of the T? Dollies dad post in the general listing, eighteenth photo down. Interesting details! Something you could replicate in the future!
- Tue Mar 23, 2021 8:05 pm
- Forum: Classifieds - Parts
- Topic: WTB Stromberg MB-1 choke assy
- Replies: 3
- Views: 1069
Re: WTB Stromberg MB-1 choke assy
Trying once again! Still looking!
- Mon Mar 22, 2021 6:15 pm
- Forum: General Discussion Forum
- Topic: Chickasha Report
- Replies: 67
- Views: 10958
Re: Chickasha Report
Dave, did you give Dallas any TT racing advice? Photo looks like maybe you were? Just curious!
- Sun Mar 21, 2021 12:33 pm
- Forum: General Discussion Forum
- Topic: Is a T Safer than a Modern Car?
- Replies: 25
- Views: 3927
Re: Is a T Safer than a Modern Car?
Actually, most modern autos' electronics are very well shielded from outside electronic noise because they have to be to operate in the environment surrounding them! Got a car that has back up alarm, blind spot monitoring, adaptive cruise? That radar based with electronic emissions that could interf...