Search found 3666 matches
- Thu Apr 18, 2024 5:53 pm
- Forum: General Discussion Forum
- Topic: A day at the beach - Playa Verde, Montevideo
- Replies: 11
- Views: 647
Re: A day at the beach - Playa Verde, Montevideo
No, but he drove a "fugue" quite well!
- Thu Apr 18, 2024 12:50 am
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 80
- Views: 6772
Re: You tell me
Looking good! And truly inspirational!
Thank you for all the postings.
Thank you for all the postings.
- Wed Apr 17, 2024 8:41 pm
- Forum: General Discussion Forum
- Topic: A day at the beach - Playa Verde, Montevideo
- Replies: 11
- Views: 647
Re: A day at the beach - Playa Verde, Montevideo
Hey! I myself have worn a suit and tie to the beach on club tours!
But, then, I was a "nerd" before it became popular. I was probably the only kid in my high school that preferred Bach to the Beach Boys.
- Wed Apr 17, 2024 8:24 pm
- Forum: General Discussion Forum
- Topic: Is this right
- Replies: 20
- Views: 622
Re: Is this right
It is actually the sideways motion of the shaft that engages the brake bands that make low, reverse, and the brake itself work! The brake itself and reverse move outward, so the shaft required for the motion is inside the housing. The low band (on left hand driven cars) move sideways from the outsid...
- Sun Apr 14, 2024 3:30 pm
- Forum: General Discussion Forum
- Topic: 1920 Canadian Touring
- Replies: 16
- Views: 507
Re: 1920 Canadian Touring
The Canadian T's I have been aware of used square drive screws in the body. These are a 4 square drive. They were used in both sheet metal and wood applications. Not sure how long they were used. I also think the engine blocks only had Ford script or no script not made in USA. just sayin' brasscarg...
- Sun Apr 14, 2024 4:26 am
- Forum: General Discussion Forum
- Topic: Fisk Tyres Model T - Montevideo
- Replies: 8
- Views: 675
Re: Fisk Tyres Model T - Montevideo
Really great writeup there Hap T! Nice to see you posting lengthy pieces again. I have always really enjoyed reading them myself, and am sure others interested in model T history do also.
- Fri Apr 12, 2024 9:54 pm
- Forum: General Discussion Forum
- Topic: 1920 Canadian Touring
- Replies: 16
- Views: 507
Re: 1920 Canadian Touring
Who says it is a Canadian touring? Cannot tell for certain that it does not have a driver's door, but it does not appear to be. Also who says it is a 1920? Headlamp lenses are later than that, but they could have been changed. The angle of the photo does not show the body well. The front seat arm/ca...
- Thu Apr 11, 2024 4:16 pm
- Forum: General Discussion Forum
- Topic: Can I give you a lift?
- Replies: 16
- Views: 844
Re: Can I give you a lift?
Neat! Any additional photos of the same car?
- Thu Apr 11, 2024 6:26 am
- Forum: General Discussion Forum
- Topic: Can I give you a lift?
- Replies: 16
- Views: 844
Re: Can I give you a lift?
Sure looks like the same girl and likely the same car! But there are a few curious differences. The previous photo car has an after-market visor at the top of the windshield, and no spot light on the fender braces. This one does not have the visor, just the top windshield glass swung way forward. Wh...
- Thu Apr 11, 2024 5:55 am
- Forum: General Discussion Forum
- Topic: Why no braking in reverse with Rocky Mtn brakes?
- Replies: 34
- Views: 1343
Re: Why no braking in reverse with Rocky Mtn brakes?
Kelly Jons, I for a long time have been an opposing view on the "Rocky Mountain" brake issue. In my opinion, they are seriously flawed in their design and those flaws should have been corrected a couple decades ago. A point of fact, the original 1920s design was very good, and they were nicely repro...
- Wed Apr 10, 2024 9:12 pm
- Forum: General Discussion Forum
- Topic: Firestone serviceman and vehicle, circa 1916
- Replies: 6
- Views: 495
Re: Firestone serviceman and vehicle, circa 1916
Hey there John E G! that is a really great photo! Pretty sure I have never seen it before. I wonder it there are wooden spokes behind those discs with the advertising on them? Or are they actually steel disc wheels? 1916 would be a bit early for accessory steel disc wheels I would think. You can see...
- Tue Apr 09, 2024 9:29 pm
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 80
- Views: 6772
Re: You tell me
Is that the gasoline tank you are going to use there? Just curious, it would look great!
Wonderful, beautiful, work you do!
Thank you for sharing it here.
Wonderful, beautiful, work you do!
Thank you for sharing it here.
- Tue Apr 09, 2024 7:30 pm
- Forum: General Discussion Forum
- Topic: I think theres a plastic coil box rebuild kit in my future.
- Replies: 7
- Views: 671
Re: I think theres a plastic coil box rebuild kit in my future.
Ohm meters vary, mine, I usually test for shorts on the ohm X 1000 or even a higher setting. Low settings can often miss active shorts. I would suspect the timer still, or one of the contact posts around the timer. Even if, maybe especially if, the timer was recently cleaned. Seen it many times, and...
- Tue Apr 09, 2024 4:13 am
- Forum: General Discussion Forum
- Topic: Coupelet Lamp Brackets HELP!
- Replies: 22
- Views: 1144
Re: Coupelet Lamp Brackets?
The little I know. The earliest convertible couplets had different side and tail lamps, and the taillamp was mounted nearer the fender to gain access into the early style rear door into the turtle deck (for those not familiar with the early couplets). Therefore, they not only had different lamps, bu...
- Mon Apr 08, 2024 3:43 am
- Forum: General Discussion Forum
- Topic: “Least he’s not on the hood!”
- Replies: 16
- Views: 974
Re: “Least he’s not on the hood!”
Thank you Allan B for those details. I had wondered if the trees might offer a clue. I wanted to expand a bit on the notion of the "speedster pickup". While not a commonly seen thing, over the years I have seen a fair number of era photos of what amount to "speedster pickups". They are an interestin...
- Sun Apr 07, 2024 6:39 pm
- Forum: General Discussion Forum
- Topic: “Least he’s not on the hood!”
- Replies: 16
- Views: 974
Re: “Least he’s not on the hood!”
#7 Is the bucket lengthened or the frame shortened? It isn't a USA Ford factory body. Although similar to the 1926/'27 open car cowl, the fenders indicate the car should be earlier than that. It could possibly be an Australian bodied T (photo flipped?)? Or an after-market speedster/roadster type bo...
- Sun Apr 07, 2024 7:58 am
- Forum: General Discussion Forum
- Topic: I'm a complete Moron
- Replies: 9
- Views: 914
Re: I'm a complete Moron
And by the way Bruce K? Everybody makes mistakes getting started with these silly machines. Give yourself a bit of time, practice in relatively safe areas, and you too can become as comfortable behind the wheel of a tin Lizzie as though you were sitting on the sofa watching television.
- Sun Apr 07, 2024 7:49 am
- Forum: General Discussion Forum
- Topic: I'm a complete Moron
- Replies: 9
- Views: 914
Re: I'm a complete Moron
Been several years since I had the opportunity. But in the past, when I taught anybody how to drive a model T? The first thing I would tell them is to "forget everything you ever learned about driving after you were five years old. When you were five, you knew mommy or daddy sat behind the wheel, di...
- Sun Apr 07, 2024 12:06 am
- Forum: General Discussion Forum
- Topic: Why the need to change?
- Replies: 16
- Views: 1408
Re: Why the need to change?
Jerry V, Interesting idea!
- Sat Apr 06, 2024 9:24 pm
- Forum: General Discussion Forum
- Topic: Why the need to change?
- Replies: 16
- Views: 1408
Re: Why the need to change?
That of course would require turning the bottom piece around.
- Sat Apr 06, 2024 9:23 pm
- Forum: General Discussion Forum
- Topic: Why the need to change?
- Replies: 16
- Views: 1408
Re: Why the need to change?
It would really mess up the "Y" flow pattern. The number 3 and 4 cylinders would run stronger and richer than cylinders 1 and 2. If someone wanted to do this for some reason, it would work a bit better if the triangle "Y" was turned end for end to compensate somewhat for the change in flow distance.
- Sat Apr 06, 2024 9:10 pm
- Forum: General Discussion Forum
- Topic: Why the need to change?
- Replies: 16
- Views: 1408
Re: Why the need to change?
To put in a larger generator, or one with maybe an oil pump behind it.
- Sat Apr 06, 2024 4:26 am
- Forum: General Discussion Forum
- Topic: Ruckstell 13 tooth pinion gear
- Replies: 3
- Views: 345
Re: Ruckstell 13 tooth pinion gear
Before a thousand 13/39 gears were made post WW2, those were the usual "3 to 1" gears. Yes, they are not exactly 3 to 1, but that was what people called them. There were also some other companies back in the era that made 13/40, 13/39, 13/36, ten tooth pinions, and even a couple other unusual ratios...
- Fri Apr 05, 2024 7:11 pm
- Forum: General Discussion Forum
- Topic: Ruckstell with 12 rivet Housing??
- Replies: 8
- Views: 624
Re: Ruckstell with 12 rivet Housing??
The Horseless Carriage crowd around California loves their Ruckstells in their brass model Ts. Personally, I don't. I have only had one brass era T that I actually toured with a lot, but a few more that I haven't been able to use in recent years. For all of them, I have avoided getting or having a R...
- Thu Apr 04, 2024 7:23 pm
- Forum: General Discussion Forum
- Topic: 8- Spoke Steel Wheels
- Replies: 11
- Views: 823
Re: 8- Spoke Steel Wheels
Those Parker Hydraulic pressed steel wheels are a sort of love/hate thing for many people. Some people really love them! Some others think they are silly looking or even ugly. Personally, I like them! But I am not crazy about them. One thing I do strongly recommend. Check your wheels over very caref...
- Thu Apr 04, 2024 1:42 am
- Forum: General Discussion Forum
- Topic: Rusty pan
- Replies: 14
- Views: 831
Re: Rusty pan
Encapsulated rust can still break loose and find its way into bearings or even plug small passageways. Chemical cleaning is probably better. Harsh acids may do a good job of dissolving rust, however great care must be taken to protect your health and prevent damage to surrounding things (buildings, ...
- Wed Apr 03, 2024 5:53 pm
- Forum: General Discussion Forum
- Topic: 25 Touring radiator shell-nickel or black
- Replies: 10
- Views: 500
Re: 25 Touring radiator shell-nickel or black
After-market nickel plating goes back a lot further than most realize. Fifty years ago, nickel plated brass radiators, headlamps and sidelamps would often show up at swap meets. A 1914 blacksmith built pickup I was restoring almost thirty years ago had one nickel plated sidelamp (acquired by a previ...
- Wed Apr 03, 2024 5:37 am
- Forum: General Discussion Forum
- Topic: That’s a carload!
- Replies: 12
- Views: 1177
Re: That’s a carload!
I love that charabanc!
- Tue Apr 02, 2024 10:54 pm
- Forum: General Discussion Forum
- Topic: Nice roadster.
- Replies: 9
- Views: 1056
Re: Nice roadster.
The second photo is very interesting. It appears to be a late 1917 or very early 1918 model with the offset windshield hinges and top of the steering column horn button. But what is most interesting is the demountable wheel wheels! Of course the first obvious clue is the spare wheel on the driver's ...
- Mon Apr 01, 2024 7:04 am
- Forum: General Discussion Forum
- Topic: A.R.M.Co Radiator
- Replies: 9
- Views: 986
Re: A.R.M.Co Radiator
I am not familiar with that company. However, I have seen a couple other similar heavy duty radiators made and sold for use on the model T Ford. Most such radiators were used on TT trucks or tractor conversions to better withstand the abusive conditions they often worked under. It appears to have be...
- Mon Apr 01, 2024 6:54 am
- Forum: OT - Off topic
- Topic: Bugatti bogie !
- Replies: 20
- Views: 763
Re: Bugatti bogie !
I knew it was in the 1920s, and an earlier Bugatti than we usually see around, but had to google it for the exact year and details. This occurred at the Caerphilly Mountain Hill Climb in Cardiff Wales in 1924.The car was Raymond Mays' second Bugatti type 13 Brescia. According to reports, the car sto...
- Sun Mar 31, 2024 6:24 pm
- Forum: General Discussion Forum
- Topic: Sad News
- Replies: 10
- Views: 1307
Re: Sad News
It always saddens me to read or hear such things. However, it is a fact of life, and something from which nobody can escape. For a lot of us, the model T people we have come to know, whether in person or through interactive forums such as this one, become like our other family. For some of us, they ...
- Sat Mar 30, 2024 6:37 pm
- Forum: General Discussion Forum
- Topic: What is this body bracket?
- Replies: 3
- Views: 382
Re: What is this body bracket?
I may be wrong? But if I recall correctly, that bracket has in the past been identified as a tail lamp bracket, one a few designs, intended for TT one ton trucks. What bracket might be used on a truck depended on the style and builder of the body.
- Fri Mar 29, 2024 8:45 pm
- Forum: General Discussion Forum
- Topic: Brass cap on 1915 side lamp...brass plated?
- Replies: 7
- Views: 491
Re: Brass cap on 1915 side lamp...brass plated?
Test it with a small magnet. A lot of people back in the 1950s and 1960s brass plated the steel caps to get the brass look. Willian Harrah on his invitational tours and the HCCA used to test the 1915's for authenticity on their tours! Hobbyists in those days believed that ALL 1915 built model Ts had...
- Fri Mar 29, 2024 6:54 pm
- Forum: General Discussion Forum
- Topic: Let’s go camping!
- Replies: 7
- Views: 641
Re: Let’s go camping!
Another of those very rare shots of a "I ain't ready to accept that new fangled technology yet" guy with his car. Photo number eight, a 1915/'16 touring car with acetylene gas headlamps retrofitted. Three speedsters, two very basic "cut-downs" (one is a 1915/'16, the other can't tell how early?). Ph...
- Fri Mar 29, 2024 4:17 am
- Forum: General Discussion Forum
- Topic: 10,000 octopi can’t be wrong !
- Replies: 13
- Views: 1070
Re: 10,000 octopi can’t be wrong !
And speaking of "missing fun" Richard B, I hope a few people notice your posting's "address" Pilgrim.
I better stop now, or the drift might be too deep!
I better stop now, or the drift might be too deep!
- Fri Mar 29, 2024 4:06 am
- Forum: General Discussion Forum
- Topic: disassembly for clean and paint - 1915 sidelamps
- Replies: 7
- Views: 490
Re: disassembly for clean and paint - 1915 sidelamps
If the sidelamp is rusty, about nine times out of ten, just turning the brass cap will break the long stud that holds it to the rest of the lamp, and in turn holds the top half of everything together. Usually, that stud can be replaced by very careful brazing (put the brass cover into water to keep ...
- Thu Mar 28, 2024 8:06 pm
- Forum: General Discussion Forum
- Topic: 10,000 octopi can’t be wrong !
- Replies: 13
- Views: 1070
Re: 10,000 octopi can’t be wrong !
What are you John M, some kind of engineer? (I had the same thought when I read this thread the first time!)
- Thu Mar 28, 2024 5:29 pm
- Forum: General Discussion Forum
- Topic: Top for a 12 roadster
- Replies: 3
- Views: 346
Re: Top for a 12 roadster
Richard G, I have met him, but don't really know him myself. He is well known to the Santa Cruz and Salinas area HCCA people as well as some of the Nickel Age crowd. He has been doing restoration work for a quite a number of years (about thirty years I think?) and his reputation with most of the HCC...
- Wed Mar 27, 2024 7:33 pm
- Forum: OT - Off topic
- Topic: Bugatti bogie !
- Replies: 20
- Views: 763
Re: Bugatti bogie !
I can (often have) imagine the photographer, standing there, waiting for cars to round the corner, hoping to get a good shot of them. Raymond Mays comes into view, and the photographer readies himself, and squeezes the bulb! Then things get crazy for a few seconds. The car skids to a stop just feet ...
- Wed Mar 27, 2024 7:07 am
- Forum: OT - Off topic
- Topic: Bugatti bogie !
- Replies: 20
- Views: 763
Re: Bugatti bogie !
I love that photo! A one in a million shot with the wheel in the air that high and the dust flying! The look on the driver's face is PRICELESS!
By the way, the driver is Raymond Mays, a wealthy Englishman and playboy driving his Bugatti. He was a respected and accomplished racing driver.
By the way, the driver is Raymond Mays, a wealthy Englishman and playboy driving his Bugatti. He was a respected and accomplished racing driver.
- Wed Mar 27, 2024 2:39 am
- Forum: General Discussion Forum
- Topic: Has anyone ever driven their T across the Mighty Mac?
- Replies: 30
- Views: 1450
Re: Has anyone ever driven their T across the Mighty Mac?
Thank you Tim M and Tim J for the clarification and more! One thing I love about this forum is how we/I can always learn about many things in addition to the model Ts.
- Tue Mar 26, 2024 10:27 pm
- Forum: General Discussion Forum
- Topic: That’s a carload!
- Replies: 12
- Views: 1177
Re: That’s a carload!
My guess is that that fellow made a decent living providing temporary power when and where needed. Lots of equipment had been made to run off stationary engines of many types, harvesters, corn huskers, saws, pumps, and the list goes on and on. During harvest season, many farmers might need stationar...
- Tue Mar 26, 2024 10:06 pm
- Forum: General Discussion Forum
- Topic: Has anyone ever driven their T across the Mighty Mac?
- Replies: 30
- Views: 1450
Re: Has anyone ever driven their T across the Mighty Mac?
"Yoopers" and "trolls"????
I get the "Yoopers" part of it. The "U" and "P" of "Upper Peninsula". But "trolls"???
I may be two thousand miles away and never been there. But I did know of the bridge by name, even the nickname.
I get the "Yoopers" part of it. The "U" and "P" of "Upper Peninsula". But "trolls"???
I may be two thousand miles away and never been there. But I did know of the bridge by name, even the nickname.
- Tue Mar 26, 2024 9:56 pm
- Forum: General Discussion Forum
- Topic: Finally got windows.
- Replies: 12
- Views: 1130
Re: Finally got windows.
I don't care what anybody else says, that is a great looking model T!
Funny though, just yesterday, I almost posted on your "You Tell Me" thread about your speedster build asking whether you had finished the red touring yet or not?
Funny though, just yesterday, I almost posted on your "You Tell Me" thread about your speedster build asking whether you had finished the red touring yet or not?
- Tue Mar 26, 2024 3:35 am
- Forum: General Discussion Forum
- Topic: Jumbo Giant Transmission?
- Replies: 2
- Views: 370
Re: Jumbo Giant Transmission?
I have a couple of them, actually three I think, but one has some serious water damage to the lower cluster gear. I have never had one in a car or driven a car with one. Several people that I have known with them liked them very much and a few even preferred the Jumbo Giant to the other more common ...
- Mon Mar 25, 2024 4:36 pm
- Forum: General Discussion Forum
- Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
- Replies: 88
- Views: 3724
Re: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
:D My '23 touring has disc brakes and a dip stick. I've never had MTFCA decline my annual dues for non originality. The only "dipstick" any of my model Ts ever had was the one behind the steering wheel! Ahoooo-ooogha! (I'm jokingly putting me down! If I want to put someone down I wanna put ME down!)
- Mon Mar 25, 2024 3:31 pm
- Forum: General Discussion Forum
- Topic: Mercury Update
- Replies: 22
- Views: 1761
Re: Mercury Update
"Safety Last", a GREAT Harold Lloyd movie, and probably his most famous film (Harold hanging from the big clock scene).
- Mon Mar 25, 2024 1:37 am
- Forum: General Discussion Forum
- Topic: Mercury Update
- Replies: 22
- Views: 1761
Re: Mercury Update
Wait a minute! Those look like real brakes? What are they doing near a model T?
- Mon Mar 25, 2024 1:28 am
- Forum: General Discussion Forum
- Topic: muncie
- Replies: 18
- Views: 1343
Re: muncie
I have had two good (and still have one junk?) Muncies for model Ts. Both were quiet in all gears. Loved them! The Warford I ran for several years was also good, but a little noisier.
- Sun Mar 24, 2024 10:12 pm
- Forum: General Discussion Forum
- Topic: Bronze Thrust Washers
- Replies: 5
- Views: 545
Re: Bronze Thrust Washers
I use one of our brass $1 coins to replace the fibre washer between the axles. They are thick enough that they can be sanded down to make a custom fit for the particular job. A collapsed bronze diff thrust may allow the crown wheel and pinion gear to over-ride one another. Hence the safety compromi...
- Sun Mar 24, 2024 6:15 pm
- Forum: General Discussion Forum
- Topic: For Don Booth
- Replies: 8
- Views: 847
Re: For Don Booth
I have noticed quite a few people in recent months complaining about not being able to post photos here. I have no idea what the problem is or where it lies. I haven't posted a lot of photos for several years myself, for a different issue. I have never had much trouble on this forum for many years p...
- Sat Mar 23, 2024 6:34 pm
- Forum: General Discussion Forum
- Topic: Those darn college kids!
- Replies: 12
- Views: 686
Re: Those darn college kids!
Several wonderful photos! Number one, I don't know if college kids are clowning around or what they are doing? Everybody appears to be alive and well enough. Are they pretending to be victims of the "crash"? The right (top?) front wheel is spinning (slow shutter speed blur of the wheel spokes) and t...
- Sat Mar 23, 2024 5:33 pm
- Forum: OT - Off topic
- Topic: Why stop at 12 languages?
- Replies: 18
- Views: 1049
Re: Why stop at 12 languages?
Mixed culture households fascinate me! How a couple from very different backgrounds navigate their home lives, deal with extended families with different languages, different religions and holidays. Very often, when I have met people with families like that, I am impressed how well they make it work...
- Sat Mar 23, 2024 5:41 am
- Forum: General Discussion Forum
- Topic: Question about axle shaft length 1912 Runabout
- Replies: 11
- Views: 508
Re: Question about axle shaft length 1912 Runabout
Definitely take it apart! Too many unknowns. You should not have that much measurable difference in how much the axle extends out from the housings. Although some measurable difference may be acceptable? Make certain the thrust washers are bronze type. Make sure one of the axles isn't excessively wo...
- Sat Mar 23, 2024 5:24 am
- Forum: OT - Off topic
- Topic: Princess Kate has cancer
- Replies: 2
- Views: 455
Re: Princess Kate has cancer
Over thirty years ago, my wife's older sister died of stomach cancer at the age of 36. Way too young, and a very difficult time for her entire family. I feel so much sympathy for Kate, her husband and children. I do hope Kate's condition has a better prognosis than Diane's stomach cancer was. I do h...
- Sat Mar 23, 2024 4:06 am
- Forum: OT - Off topic
- Topic: Why stop at 12 languages?
- Replies: 18
- Views: 1049
Re: Why stop at 12 languages?
My wife's grandmother grew up in a home that spoke Finnish. Talk about a language that is difficult! I took German in high school, can still speak it and understand it somewhat. What I learned in German has on occasion helped me to read Dutch! On a few occasions in my life, I have met German tourist...
- Sat Mar 23, 2024 12:03 am
- Forum: General Discussion Forum
- Topic: Model T aftermarket radiator?
- Replies: 18
- Views: 1329
Re: Model T aftermarket radiator?
THANK YOU Ed! For the life of me I couldn't pull it out.
- Fri Mar 22, 2024 9:47 pm
- Forum: General Discussion Forum
- Topic: Can this drag link be straightened?
- Replies: 14
- Views: 776
Re: Can this drag link be straightened?
A long gentle bend like that indicates that it was somewhat bent before the rut it hit. Speedsters often need to have that drag link bent slightly to reach between the pitman arm and spindle connections. And they rarely get bent like that while being driven. As Mack Cole says, "It bent cold, straigh...
- Fri Mar 22, 2024 7:59 pm
- Forum: General Discussion Forum
- Topic: Radiator Stone Guard
- Replies: 13
- Views: 1409
Re: Radiator Stone Guard
There he goes again! Rambling down some historic recollections rabbit hole? Stone guards were very popular accessories for hobbyists during the 1950s through the 1980s for the big Classic automobiles and model A Fords. I actually knew a fellow that made hundreds of the model A versions back in the 1...
- Fri Mar 22, 2024 4:18 am
- Forum: General Discussion Forum
- Topic: Where did it go?
- Replies: 12
- Views: 820
Re: Where did it go?
Oh, and one other thing I intended to mention. I love that radiator cap and Motometer! In spite of the fact it is like wearing a belt and suspenders. It is not the first era photograph I have seen with this, however, "wings" and a "dogbone" were usually not used on the same cap. Yep. Sometimes they ...
- Fri Mar 22, 2024 4:12 am
- Forum: General Discussion Forum
- Topic: Where did it go?
- Replies: 12
- Views: 820
Re: Where did it go?
Picture number four has some interesting details. After studying it closely, I suspect the windshield has been changed to an earlier one. The windshield clearly has the even folding hinges used 1915 into mid 1917. However, the "H" lenses in the headlamps first came about very late in 1921. A reflect...
- Fri Mar 22, 2024 3:47 am
- Forum: General Discussion Forum
- Topic: Model T aftermarket radiator?
- Replies: 18
- Views: 1329
Re: Model T aftermarket radiator?
Such upgrade kits were made and sold by several companies! Peerless sheet metal and Ames were two of the best known. And I must be getting old, I have known the name on Ed's number four shell for more than fifty years, but it escapes me at the moment? I probably have twenty different photos on my co...
- Wed Mar 20, 2024 1:33 am
- Forum: General Discussion Forum
- Topic: muncie
- Replies: 18
- Views: 1343
Re: muncie
I agree with JTT3 ! That is the heavy or big case Muncie, and most likely has under, direct, overdrive, and reverse. I had one in my first speedster (they do fit and were sold for use in both Ts and TTs! Don't fall into that "Truck" Muncie Bologna. If the gears are in reasonably good condition, they...
- Tue Mar 19, 2024 10:35 pm
- Forum: General Discussion Forum
- Topic: Looking for Tut.
- Replies: 28
- Views: 1377
Re: Looking for Tut.
I sure like that second photo with the two 1915 touring cars! Both appear to have brass trimmed lamps, so likely both true 1915s. I can't see enough detail of the license plates to pin down a year. And I would really like to know what the car the other side of the two Ts is? Notice, that the nearest...
- Tue Mar 19, 2024 8:50 pm
- Forum: General Discussion Forum
- Topic: Looking for Tut.
- Replies: 28
- Views: 1377
Re: Looking for Tut.
Thank you Allan B for the clarification! I had read that before, but forgotten about it.
Again, thank you.
Again, thank you.
- Tue Mar 19, 2024 6:47 pm
- Forum: General Discussion Forum
- Topic: Looking for Tut.
- Replies: 28
- Views: 1377
Re: Looking for Tut.
I thought likely British, based in part on the license plate, but the TT is left-hand side driven, which I would expect to be unusual in England. British Empire, its colonies, and much of Europe, were all more likely to nickel plate the radiator shell than was the USA. For them, the model T was an e...
- Tue Mar 19, 2024 8:00 am
- Forum: General Discussion Forum
- Topic: Looking for Tut.
- Replies: 28
- Views: 1377
Re: Looking for Tut.
Number five, the milk bottle TT, has the 1921 only green painted visor headlamp lenses. Nickel plating the radiator shell was unusual on black era model Ts, on TT trucks it is almost unheard of! The license plate looks like it is from outside the USA? Anybody recognize it? Really a neat interesting ...
- Fri Mar 15, 2024 8:50 pm
- Forum: General Discussion Forum
- Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
- Replies: 88
- Views: 3724
Re: Is a 1911 Built With Many NonOriginal Parts Worthy of being Here?
NorthSouth, Steve, As I mentioned not personally knowing John Karvaly, but knowing him through years on the forum, I have also enjoyed reading many of your postings and feel I know you somewhat. I truly hope to get to meet you at some tour or swap meet and be able to shake your hand! Hopefully, I ge...
- Fri Mar 15, 2024 8:25 pm
- Forum: General Discussion Forum
- Topic: I texted a friend asking "How was Chickasha today?"....
- Replies: 39
- Views: 3822
Re: I texted a friend asking "How was Chickasha today?"....
Wow. I do wish i was there though. However, I remember when any swap meet with fifty sellers was considered a BIG meet! The very first swap meet I went to (still in high school then) had thirteen sellers. I helped a local model A club with their swap meet for several years in spite of me not being a...
- Fri Mar 15, 2024 5:57 pm
- Forum: General Discussion Forum
- Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
- Replies: 88
- Views: 3724
Re: Is a 1911 Built With Many NonOriginal Parts Worthy of being Here?
Where to start?! Speedytinc indicates he knows you. While I do not personally know John K myself, I have known him and his reputation through this forum for many years. What he says means something! Your 1911 is as authentic as half the brass era model Ts on the road! While the 1926ish engine "techn...
- Thu Mar 14, 2024 7:56 pm
- Forum: General Discussion Forum
- Topic: Finally got some good hel
- Replies: 8
- Views: 990
Re: Finally got some good hel
Okay. Do we want to see a photo? If it is a baby, we want to see a photo. If it is a grandchild, we want to see a photo. If it is a dog, we want to see a photo. If it is a cat, we want to see a photo. If it is a racoon, we want to see a photo, although also send it to facebook, my wife says they lik...
- Thu Mar 14, 2024 7:45 pm
- Forum: General Discussion Forum
- Topic: Front Spindle That Took a Hard Hit
- Replies: 5
- Views: 492
Re: Front Spindle That Took a Hard Hit
Like Allan, I have seen several photos of the odd defective spindles on here. It has been said that Ford sold some defective parts that had been rejected from the assembly line. Whether that was a deliberate action, or some employee's bad judgement has never been determined as far as I know. In some...
- Thu Mar 14, 2024 5:36 am
- Forum: General Discussion Forum
- Topic: Steve Jelf is home safe and sound
- Replies: 53
- Views: 5281
Re: Steve Jelf is home safe and sound
I am so glad to see you doing so well!
The high point of my day!
The high point of my day!
- Thu Mar 07, 2024 9:31 pm
- Forum: General Discussion Forum
- Topic: Engine block numbering
- Replies: 9
- Views: 717
Re: Engine block numbering
Additionally, I have no idea who "AN" might have been. Things like boats and farm machinery usually did not need the transmission, or want the extra weight. So they would buy just the short block engines and use their own proprietary pan and flywheel. Some farm machinery needed just a bit more horse...
- Thu Mar 07, 2024 8:59 pm
- Forum: General Discussion Forum
- Topic: Engine block numbering
- Replies: 9
- Views: 717
Re: Engine block numbering
The numbers ahead of the water inlet are likely mold and pattern numbers, used by the factory quality control to track defective castings back and replace or repair the offending molds. The serial number is unusual, but actually not all that rare. Rarely found in the books, Ford sold many thousands ...
- Thu Mar 07, 2024 8:41 pm
- Forum: General Discussion Forum
- Topic: Bing! Bang! Boom!
- Replies: 16
- Views: 1191
Re: Bing! Bang! Boom!
I am sorry. I just can't help myself.
- Thu Mar 07, 2024 6:43 pm
- Forum: General Discussion Forum
- Topic: Bing! Bang! Boom!
- Replies: 16
- Views: 1191
Re: Bing! Bang! Boom!
Thank you Tom for the look at the backside of that photo!
- Thu Mar 07, 2024 6:36 pm
- Forum: General Discussion Forum
- Topic: Bing! Bang! Boom!
- Replies: 16
- Views: 1191
Re: Bing! Bang! Boom!
Photo number six, the flapper standing by the side with her dog on the fender (my first glance I thought it was a racoon coat!) of the touring car. The car appears to be about 1922, shiny and nice, with pancake Hasslers, front fender braces, a triple A radiator badge, and a neat dogbone cap and Moto...
- Thu Mar 07, 2024 5:06 pm
- Forum: General Discussion Forum
- Topic: Bing! Bang! Boom!
- Replies: 16
- Views: 1191
Re: Bing! Bang! Boom!
You beat me to it Darel! I had just noticed the same things! I also see that it has the higher radiator neck. An interesting late 1910 to early 1911 model? It would be nice to know the story behind the photo. It looks so much like a marketing photo, pretty girl at the wheel an all? Yet there is a fa...
- Wed Mar 06, 2024 7:14 am
- Forum: General Discussion Forum
- Topic: Hang on buddy!
- Replies: 21
- Views: 1468
Re: Hang on buddy!
Were you a columnist in a previous life, Wayne ? (Me, laughing.) One might think so? But no, there were a lot of things I should have been but never really was. Antique automobiles in general and model Ts in particular have been a lifelong passion for me. I have been reading about them since I was ...
- Tue Mar 05, 2024 7:41 pm
- Forum: General Discussion Forum
- Topic: Hang on buddy!
- Replies: 21
- Views: 1468
Re: Hang on buddy!
Thank you Larry S, I appreciate that. If you ever catch me in a factual error, please correct me. I want people to get some of this stuff right. I find it so very interesting that I just cannot help myself for looking closely and trying to figure out the details of our beloved model T's history. The...
- Tue Mar 05, 2024 4:49 pm
- Forum: General Discussion Forum
- Topic: Russ Potters Passing and Arrangements
- Replies: 36
- Views: 2407
Re: Russ Potters Passing and Arrangements
Saddened to see this. We have known this was coming for quite some time now, but still sad to know it has happened.
Russ has been a major player and a fixture in this hobby for a very long time. He will be missed, and remembered for another long time.
Russ has been a major player and a fixture in this hobby for a very long time. He will be missed, and remembered for another long time.
- Mon Mar 04, 2024 7:31 pm
- Forum: General Discussion Forum
- Topic: Professional Driver
- Replies: 4
- Views: 583
Re: Professional Driver
It was a strange and special time for humanity. Many millions of people stepping almost literally from the stone age into the modern age. Anyone born before 1880 knew hard work, they knew splitting wood, plowing fields the hard way, and moving heavy objects without heavy duty equipment. They mostly ...
- Mon Mar 04, 2024 6:44 pm
- Forum: General Discussion Forum
- Topic: Hang on buddy!
- Replies: 21
- Views: 1468
Re: Hang on buddy!
The transition from 1912 to 1913 models was really messy. 1912 had been an entire model year of constant changes. The engine's serial number was placed in five different locations. Between step-side and slab-side touring cars, one or two piece firewalls, and rear doors that some opened from the fron...
- Sun Mar 03, 2024 9:38 pm
- Forum: General Discussion Forum
- Topic: T based trailer - Sanilac County, Michigan
- Replies: 6
- Views: 823
Re: T based trailer - Sanilac County, Michigan
The 1881 fire in the Thumb followed 10 years after another big fire. Interestingly, that fire was at the same time as the Chicago Fire and the Peshtigo Fire.... They think burning embers were carried hundreds of miles by the winds to ignite the Thumb fire. I believe it! Thirty-five to forty years a...
- Sat Mar 02, 2024 7:06 pm
- Forum: General Discussion Forum
- Topic: All the old gang.
- Replies: 9
- Views: 735
Re: All the old gang.
Another wonderful bunch of photos! The people and the cars, things to see and occasions to wonder about. Number two looks like a hard working tough bunch of guys, standing around around a 1913/'14 touring car with Hassler shock absorbers. Number thirteen is an interesting shot of an era upgraded 191...
- Fri Mar 01, 2024 6:45 pm
- Forum: General Discussion Forum
- Topic: What’s the story?
- Replies: 21
- Views: 1274
- Thu Feb 29, 2024 11:42 pm
- Forum: General Discussion Forum
- Topic: 27 driving chassis, an I being cheap offering $1500?
- Replies: 24
- Views: 1189
Re: 27 driving chassis, an I being cheap offering $1500?
Mr. J Humble makes VERY good points!!! IF (big IF and ONLY IF!) the two year old radiator was a good one to begin with (like a Berg's?), and still in "like new" condition? Then the $1500 would be a bargain. If the radiator has been poorly cared for in any way (or frozen?), and with a likelihood the ...
- Thu Feb 29, 2024 10:22 pm
- Forum: General Discussion Forum
- Topic: What’s the story?
- Replies: 21
- Views: 1274
Re: What’s the story?
Picture number seven, the Olson Brother's garage, is a brass radiator center-door sedan! The detail is not clear enough to determine for sure whether it is an early 1915 Center-door sedan, or the later 1916 center-door sedan? But it clearly has the brass radiator and flat front fenders. The bodies, ...
- Thu Feb 29, 2024 9:37 pm
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 80
- Views: 6772
Re: You tell me
Beautiful workmanship! And nice tutorial.
- Thu Feb 29, 2024 6:14 pm
- Forum: General Discussion Forum
- Topic: What’s the story?
- Replies: 21
- Views: 1274
Re: What’s the story?
Another bunch of intriguing photos! The first one is certainly getting a lot of interest. I haven't had time to look it over closely yet. But what I see at a glance is that it isn't a running vehicle anymore. It appears the torque tube is missing, but the drive shaft may still be in place, hanging o...
- Thu Feb 29, 2024 4:48 am
- Forum: General Discussion Forum
- Topic: The Gang around my’24 Touring
- Replies: 4
- Views: 751
Re: The Gang around my’24 Touring
A model T in the middle of it all (with oil sidelamps no less, so it MUST not have a starter?). Looks on topic to me?
- Mon Feb 26, 2024 5:04 pm
- Forum: General Discussion Forum
- Topic: Which steering column is 1916?
- Replies: 10
- Views: 705
Re: Which steering column is 1916?
Most mid-1915/'16/'17 steering columns had the early electric horn that used a single grounding wire through the very small horn-wire tube to the smaller horn button mounted on the top side of the top end of the steering column. Most 1915s had the spark and throttle levers with the larger flatter pa...
- Mon Feb 26, 2024 3:52 am
- Forum: General Discussion Forum
- Topic: Better get that fixed.
- Replies: 25
- Views: 1887
Re: Better get that fixed.
Photo number nine is a nice look at a fairly new looking late 1912 with no outside rear door handle. Notice also the door is rear opening, since that question seems to come up from time to time. Although the car is in less than perfect condition, with a dented radiator and missing the right headlamp...
- Sun Feb 25, 2024 8:25 pm
- Forum: General Discussion Forum
- Topic: Better get that fixed.
- Replies: 25
- Views: 1887
Re: Better get that fixed.
Okay. I stared at the closeup of the windshield hinge. I have convinced myself that it is not heavier than the typical 1915 into early 1917 hinge, or the slightly different 1914 ones either. It is an optical illusion, a "trick of the light" that makes it appear heavier. The typical 1915 into early 1...
- Sun Feb 25, 2024 7:24 pm
- Forum: General Discussion Forum
- Topic: Better get that fixed.
- Replies: 25
- Views: 1887
Re: Better get that fixed.
Hi Wayne. The bowl on both lamps appear to be flat bottomed rather than the round bottom like most of those lamps. After market or early '15 perhaps. The side lens would show clearly if the lamp was burning. Nice observation. Thank you for the closeup pictures! They help a lot. I was also wondering...
- Sun Feb 25, 2024 5:41 pm
- Forum: General Discussion Forum
- Topic: Can you weld the hogshead?
- Replies: 14
- Views: 1176
Re: Can you weld the hogshead?
I am not sure that this is the "best" advice. But my experience has been that the 1920's cast iron hogsheads are a high quality cast iron. They can be welded using some sort of nickel/iron welding rod, or, they can be brazed. Given that not the entire hole is gone, if it were mine and a better repla...
- Sun Feb 25, 2024 1:06 am
- Forum: General Discussion Forum
- Topic: Nuthin' Special gets a makeover, carston' T update.
- Replies: 28
- Views: 2284
Re: Nuthin' Special gets a makeover, carston' T update.
Carston must be nearly old enough to drive on the road legally by now?
- Sun Feb 25, 2024 1:03 am
- Forum: General Discussion Forum
- Topic: Steve Jelf is home safe and sound
- Replies: 53
- Views: 5281
Re: Steve Jelf is home safe and sound
Wonderful to hear/read! hopefully it can become like it never happened.
How is Shorty doing?
How is Shorty doing?