Yep. This is more accurate, as my 1922 Coupe has the same arrangement.
borrowed photograph.
Square tank is positioned on a squarish platform with a 2x1 ish hold-down.
Search found 622 matches
- Fri Mar 22, 2024 1:49 pm
- Forum: General Discussion Forum
- Topic: Gas tank, installation on 22 doctors coupe
- Replies: 6
- Views: 426
- Sun Mar 17, 2024 10:55 am
- Forum: General Discussion Forum
- Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
- Replies: 88
- Views: 3168
Re: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
What is more disagreeable: Constructing a replica from period parts, or restoring an original car because you didn't like to original colour? https://www.reddit.com/r/Bugatti/comments/17qn49e/bugatti_type_57sc_atlantic_57591_was_it_actually/ https://www.topgear.com/car-news/classic/one-bugatti-world...
- Wed Mar 13, 2024 1:54 pm
- Forum: General Discussion Forum
- Topic: 1920 Ford dealership building and garage for sale
- Replies: 7
- Views: 817
Re: 1920 Ford dealership building and garage for sale
"A must visit & off the Lincoln Highway"
Actually Pitt Street is the original Lincoln Highway.
Actually Pitt Street is the original Lincoln Highway.
- Tue Mar 12, 2024 12:07 am
- Forum: General Discussion Forum
- Topic: 1920 Ford dealership building and garage for sale
- Replies: 7
- Views: 817
1920 Ford dealership building and garage for sale
This is not mine and I have no interest but.... Commanding, one of a kind, stone building located at the busiest corner in the Bedford Borough. Originally built as a Ford Dealership in the early 1920's, this property presents endless possibilities and opportunities. Light manufacturing, warehousing,...
- Sat Mar 09, 2024 1:53 pm
- Forum: General Discussion Forum
- Topic: More Power
- Replies: 4
- Views: 549
More Power
ANY QUESTIONS?
From Facebook
- Fri Mar 08, 2024 4:23 pm
- Forum: General Discussion Forum
- Topic: Engine block numbering
- Replies: 9
- Views: 631
Re: Engine block numbering
What if the motor was surplus. Left over from either WWI or WWII military surplus.
The the AN *****, would indicate that it had another purpose.
Joint Army-Navy Nomenclature System (AN System. JAN)
The the AN *****, would indicate that it had another purpose.
Joint Army-Navy Nomenclature System (AN System. JAN)
- Thu Mar 07, 2024 11:22 am
- Forum: General Discussion Forum
- Topic: Aquiring extra power
- Replies: 13
- Views: 659
Aquiring extra power
Aquiring extra power
Rather than rebuilding a strong motor to acquire extra hill pulling power, can the installation to a 4:1 compression motor of NO2 be a benefit?
Rather than rebuilding a strong motor to acquire extra hill pulling power, can the installation to a 4:1 compression motor of NO2 be a benefit?
- Wed Mar 06, 2024 11:54 am
- Forum: General Discussion Forum
- Topic: Ford building lost
- Replies: 25
- Views: 2868
Re: Ford building lost
So How many Ford Related structures are still stand and being adapted to preserve them?
- Mon Mar 04, 2024 10:18 am
- Forum: General Discussion Forum
- Topic: Professional Driver
- Replies: 4
- Views: 545
Professional Driver
So often reading the early development of the automobile, when companies were in competition to improve the marque, the manufactures used"professional" drivers.
What were the qualifications for a professional driver?
What were the qualifications for a professional driver?
- Fri Feb 23, 2024 11:27 am
- Forum: General Discussion Forum
- Topic: Thoughts on paint for wood body frame please
- Replies: 5
- Views: 462
Re: Thoughts on paint for wood body frame please
Just a suggestion. As the early automobile makers used bodies related to (horse) carriage makers, a review of the literature from the Carriage Association of America may be useful.
https://www.carriageassociationofamerica.com/
https://www.caaonline.com/library/
https://www.carriageassociationofamerica.com/
https://www.caaonline.com/library/
- Thu Jan 25, 2024 11:44 am
- Forum: General Discussion Forum
- Topic: T Roadster on Hagerty auction question
- Replies: 10
- Views: 863
Re: T Roadster on Hagerty auction question
In the late 1920s the Ford Motor Company warned new purchasers of the Model T to make certain that all the production numbers lined up. The company went as far as print all motor/vin/year of manufacture numbers at least twice in the Ford Owner, and to be reproduced in popular publications as Motor a...
- Sat Jan 13, 2024 1:50 pm
- Forum: General Discussion Forum
- Topic: New York to San Francisco via Lincoln Highway
- Replies: 34
- Views: 2290
Re: New York to San Francisco via Lincoln Highway
I have to chuckle about all those who get excited over the Lincoln Highway (circa 1912/1913). Remember it was highway constructed to get folks out of New York. But remember that there was another high way constructed to get folks out of New York and points west - The Pikes Peak Ocean To Ocean Highwa...
- Sun Jan 07, 2024 10:27 am
- Forum: General Discussion Forum
- Topic: Originality
- Replies: 28
- Views: 1555
Re: Originality
"A notable change in Model T’s came in 1919 with the introduction of an electric starter. That was a big improvement for a T. You can see and and buy older T’s with added starters and especially in the brass era cars. It’s not original to the earlier cars but people like to have the best of both era...
- Sat Jan 06, 2024 4:05 pm
- Forum: General Discussion Forum
- Topic: Originality
- Replies: 28
- Views: 1555
Re: Originality
" Already found I either have the wrong fenders or splash aprons or it's totally normal LOL." Yep. The Model T is hard to date and put together, especially when the factory parts catalogue states that it is for all Ts from 1908 to 1925. As a friend once told me -- "They all look alike." Pick a part ...
- Sat Jan 06, 2024 11:04 am
- Forum: General Discussion Forum
- Topic: Originality
- Replies: 28
- Views: 1555
Re: Originality
Interesting. Following the ways of those who practice Historic Preservation and ascribe to the text found here to answer " (a) book, or list of some sort that lists points if originality.": https://www.nps.gov/orgs/1739/tps-publications.htm. The national register states that an automobile is an elig...
- Thu Jan 04, 2024 2:18 pm
- Forum: General Discussion Forum
- Topic: Express or other wood body ideas
- Replies: 6
- Views: 500
Re: Express or other wood body ideas
For giggles and what not, remember that pre-1923 Fords ( and some others) depended on their bodies to be of a wooden frame and metal covering. Meaning that the business depended on coach builders familiar with wood frame construction. Suggest a read or at least a view of the following literature. Sc...
- Wed Jan 03, 2024 10:47 pm
- Forum: General Discussion Forum
- Topic: Express or other wood body ideas
- Replies: 6
- Views: 500
Re: Express or other wood body ideas
Is this a starting place?
- Wed Jan 03, 2024 9:23 am
- Forum: General Discussion Forum
- Topic: Early garage kits
- Replies: 7
- Views: 886
Re: Early garage kits
Reviewing Sanborn insurance maps for local communities show a transition from carriage and stable to garages from 1900 to 1930s.
- Fri Dec 29, 2023 1:30 pm
- Forum: General Discussion Forum
- Topic: I Applied for Betsy's HCCA 100 Year Plaque Today
- Replies: 10
- Views: 622
Re: I Applied for Betsy's HCCA 100 Year Plaque Today
- think those plaques are stupid! Anyone that can do basic math can figure out a cars true age. Why clutter up a nice car's dash or firewall with that nonsense?
Wow...
Wow...
- Fri Dec 29, 2023 10:36 am
- Forum: General Discussion Forum
- Topic: What DAY was your Model T built? Try this...
- Replies: 25
- Views: 1848
Re: What DAY was your Model T built? Try this...
Every Model T Ford Owner has wondered the year and production and country of origin of their car. The Ford Owner every few years would give information on production numbers, identification of point of manufacture and more. This information was also reproduced in the Motor, Chilton, etc. Attach is f...
- Thu Dec 28, 2023 5:04 pm
- Forum: General Discussion Forum
- Topic: What DAY was your Model T built? Try this...
- Replies: 25
- Views: 1848
Re: What DAY was your Model T built? Try this...
During an oral history interview of a local Model T Coupe, The story goes, when the car was delivered to the dealer for assembly, certain items were found in the seat cushion...they included an empty bottle of Goebel beer, a note with the words written "bread." And a pay stub, dated 1920...and small...
- Sat Dec 23, 2023 11:47 am
- Forum: General Discussion Forum
- Topic: Model T philosophy: What is a restoration?
- Replies: 89
- Views: 11171
Re: Model T philosophy: What is a restoration?
There is a snobbery amongst vintage automobile owners. A car can be a trailer queen or a driver. It doesn't matter, if not used the car will deteriorate , if driven it wears out. A no win. Historic building generally survive from use and adaptation. Same can be observed with automobiles. An automobi...
- Sat Dec 23, 2023 11:17 am
- Forum: General Discussion Forum
- Topic: Drawings with frame and body dimensions/measurements
- Replies: 4
- Views: 425
Re: Drawings with frame and body dimensions/measurements
http://www.mtfca.com/discus/messages/50893/77828.html?1231183405 https://www.google.com/search?client=firefox-b-1-d&sca_esv=593282225&sxsrf=AM9HkKnnUNtR6XWQCM0jtd7tnpe2iAXqEA:1703347777279&q=dimensions+model+t+ford&tbm=isch&source=lnms&sa=X&ved=2ahUKEwj47cX5-KWDAxX9K1kFHRKkC7AQ0pQJegQIDhAB&biw=1012&...
- Fri Dec 22, 2023 9:28 am
- Forum: General Discussion Forum
- Topic: Road & Track Dyno results
- Replies: 10
- Views: 881
Re: Road & Track Dyno results
So what did the RT test prove of a 100 year old plus car in the 21st century using modern fuel? The test would be more interesting if a 1915 gasoline mix was used compared to a 21st century blend. The test would be interesting is 1915 oil was in the crank case. So what did the test prove? A better t...
- Thu Dec 21, 2023 9:50 am
- Forum: General Discussion Forum
- Topic: Solstice 2023
- Replies: 6
- Views: 657
Solstice 2023
To all Happy New Year. And Happy Holidays.
- Mon Dec 18, 2023 11:12 am
- Forum: General Discussion Forum
- Topic: The importance of preservation
- Replies: 33
- Views: 1754
Re: The importance of preservation
"The United States is a republic - a nation of laws. If we don't like the laws in our state, there is a process whereby we can change them. Time to contact your representative in the state legislature."
I'll ask--
Please elaborate -- change what laws?
I'll ask--
Please elaborate -- change what laws?
- Sun Dec 17, 2023 10:48 am
- Forum: General Discussion Forum
- Topic: The importance of preservation
- Replies: 33
- Views: 1754
Re: The importance of preservation
I guess that every Deuce roadster hot rod except the first one built is a replica. Hooda thunk?
Yep! Hard to believe that an estimated 75% plus of the Model Ts, TT, Speedsters discussed here are replicas.
Yep! Hard to believe that an estimated 75% plus of the Model Ts, TT, Speedsters discussed here are replicas.
- Sun Dec 17, 2023 9:47 am
- Forum: General Discussion Forum
- Topic: The importance of preservation
- Replies: 33
- Views: 1754
Re: The importance of preservation
Susanne - I beg to differ. From the WWW the source of current information (wiki) - "A replica is an exact (usually 1:1 in scale) copy or remake of an object, made out of the same raw materials, whether a molecule, a work of art, or a commercial product. The term is also used for copies that closely ...
- Sat Dec 16, 2023 2:35 pm
- Forum: General Discussion Forum
- Topic: The importance of preservation
- Replies: 33
- Views: 1754
Re: The importance of preservation
"In reality, they have created a vintage hot rod."
Would it not be a replica vintage hot rod.
Would it not be a replica vintage hot rod.
- Fri Dec 15, 2023 6:25 pm
- Forum: General Discussion Forum
- Topic: The importance of preservation
- Replies: 33
- Views: 1754
Re: The importance of preservation
" The greats were buried next to each other, now their stones are nowhere near each other."
Well, this shows the importance of documentation.
Well, this shows the importance of documentation.
- Mon Dec 04, 2023 11:35 am
- Forum: General Discussion Forum
- Topic: Comments wanted. Another 1908 Model T?
- Replies: 21
- Views: 1433
Comments wanted. Another 1908 Model T?
From the Horseless Carriage Club of America:
- Tue Nov 28, 2023 10:50 am
- Forum: General Discussion Forum
- Topic: Understanding ignition dwell and the Model T timer
- Replies: 6
- Views: 664
Understanding ignition dwell and the Model T timer
I am not certain how to present this question and not feel dumb. Dwell is defined as - Dwell angle is the amount of time, measured as degrees of rotation, that contact breakers close in a distributor. Unless dwell angle is accurate, ignition timing won't be accurate. The discussion on the benefits o...
- Sun Nov 26, 2023 5:19 pm
- Forum: General Discussion Forum
- Topic: ECCT: Hot or Hype?
- Replies: 77
- Views: 4610
Re: ECCT: Hot or Hype?
This is really interesting. Does this imply that coil amperage is directly proportional to time-to-fire? i.e. Low coil amperage = more negative timing (advaced of zero) on the ECCT? Coversely High coil amperage = positive time (retarded from zero) on the ECCT? I'll definitely investigate this relat...
- Wed Nov 22, 2023 3:46 pm
- Forum: General Discussion Forum
- Topic: ECCT: Hot or Hype?
- Replies: 77
- Views: 4610
Re: ECCT: Hot or Hype?
Geo. John D. ....... Save your money on gas!..., Go out and buy yourself a Tesla ! I looked in to a Tesla, found out the dealer would not take the 100 year old T on trade. Found this on the interweb: https://econlife.com/2020/07/comparing-the-model-t-ford-and-tesla/ Decided in the long run the Model...
- Wed Nov 22, 2023 3:19 pm
- Forum: General Discussion Forum
- Topic: ECCT: Hot or Hype?
- Replies: 77
- Views: 4610
Re: ECCT: Hot or Hype?
Well....Jerry: "Well, if that's your reasoning, why own a Model T at all? Not owning a T could buy you somewhere around 2750 gallons of gas, on top of the gas you won't need to burn by driving it. Is a $1200 HCCT better? What if the battery powered device told you your coils weren't working? Is it w...
- Wed Nov 22, 2023 1:26 pm
- Forum: General Discussion Forum
- Topic: ECCT: Hot or Hype?
- Replies: 77
- Views: 4610
Re: ECCT: Hot or Hype?
Knives out....
All things being equal, and using the magneto as a source of power, spending enough money on a battery powered device that cost 100 gallons of fuel to be told the coils are working is mind blowing.
All things being equal, and using the magneto as a source of power, spending enough money on a battery powered device that cost 100 gallons of fuel to be told the coils are working is mind blowing.
- Wed Nov 22, 2023 10:54 am
- Forum: General Discussion Forum
- Topic: Painting Wire Wheels
- Replies: 18
- Views: 1012
Re: Painting Wire Wheels
My bad. I forgot to say that they are wire wheels.
Then by all means, sand blast and paint as desired.
Then by all means, sand blast and paint as desired.
- Wed Nov 22, 2023 10:31 am
- Forum: General Discussion Forum
- Topic: Painting Wire Wheels
- Replies: 18
- Views: 1012
Re: Painting Spoke Wheels
Your best method would be to leave the current paint on the wood, sand (by hand not sander) the current paint down, not off, leaving the current paint serve as a primer. And paint the wood spokes black.
Sand blasting wood is bad.
To be honest, never heard of powder coating wood.
Sand blasting wood is bad.
To be honest, never heard of powder coating wood.
- Tue Nov 21, 2023 2:16 pm
- Forum: General Discussion Forum
- Topic: What number key do i have?
- Replies: 16
- Views: 665
Re: What number key do i have?
Sorry for the quality of the photograph, but with an increase magnification a number can be seen to the left of the key slot.
Langs list some ford keys with numbers - https://www.modeltford.com/model-t-part ... ches/keys/
Langs list some ford keys with numbers - https://www.modeltford.com/model-t-part ... ches/keys/
- Tue Nov 21, 2023 12:04 pm
- Forum: General Discussion Forum
- Topic: How to install seatbelts on an all wood body
- Replies: 30
- Views: 1373
Re: How to install seatbelts on an all wood body
With safety of both driver and passengers, reconsidering a protective cage and seating may be in order for driving and enjoying a 100 year old cat in the 21st century. May be with future restorations, the shops can find a way to integrate reinforcement of the occupants area and still retain original...
- Mon Nov 20, 2023 10:17 am
- Forum: General Discussion Forum
- Topic: How to install seatbelts on an all wood body
- Replies: 30
- Views: 1373
Re: How to install seatbelts on an all wood body
The attached is just a though as to driving a Model T Ford...
"Crash test of a Model T Ford" (2011)
http://www.mtfca.com/discus/messages/17 ... 1324400436
"Crash test of a Model T Ford" (2011)
http://www.mtfca.com/discus/messages/17 ... 1324400436
- Sun Nov 19, 2023 9:57 am
- Forum: General Discussion Forum
- Topic: negative ground?
- Replies: 30
- Views: 1498
Re: negative ground?
Oh dear - the thread has become shocking to some reading the comments.
- Sat Nov 18, 2023 2:16 pm
- Forum: General Discussion Forum
- Topic: negative ground?
- Replies: 30
- Views: 1498
Re: negative ground?
""Once a coil fires, the secondary current is AC, not DC, so I don't think system polarity would matter to spark plugs. Coil PRIMARY polarity is important.""
The vibration and shaking of a model T is the result of the Alternating Current of the magneto.
The vibration and shaking of a model T is the result of the Alternating Current of the magneto.
- Sat Nov 18, 2023 10:56 am
- Forum: General Discussion Forum
- Topic: negative ground?
- Replies: 30
- Views: 1498
Re: negative ground?
And now this:Positive vs Negative ground. Is there an engineering reason? (circa 2022 discussion)
https://forums.aaca.org/topic/388502-po ... ng-reason/
https://forums.aaca.org/topic/388502-po ... ng-reason/
- Fri Nov 17, 2023 10:40 am
- Forum: General Discussion Forum
- Topic: ECCT: Hot or Hype?
- Replies: 77
- Views: 4610
Re: ECCT: Hot or Hype?
This is an interesting visual and read. And thank you for the presentation. But what is a proper smooth running motor with a set of induction coils? For me the proof of a proper adjusted set of coils is real world performance. I adjust my coils using the traditional buzz box, and making certain the ...
- Tue Nov 14, 2023 9:23 am
- Forum: General Discussion Forum
- Topic: Factory data about Model T
- Replies: 3
- Views: 282
Re: Factory data about Model T
It is unfortunate that there is no way to track sales or ownership of Model T from the 1920s. In the 1970s the factory records were destroyed by a fire. If you purchased the car from a previous owner, suggest a conversation to learn what you can and document it. At best you can locate year and day o...
- Sun Nov 12, 2023 10:07 am
- Forum: General Discussion Forum
- Topic: Why isn't there a Model T Register?
- Replies: 19
- Views: 946
Re: Why isn't there a Model T Register?
As the records at the Henry Ford for 1922 are destroyed, I tried to create a list of 1922 Ford Coupes surviving with Briggs manufactured bodies. The intent was to have a current geographical location, motor number and a matching Briggs body number for 1922 coupes. The results were maybe five parties...
- Sat Nov 11, 2023 5:00 pm
- Forum: General Discussion Forum
- Topic: Why isn't there a Model T Register?
- Replies: 19
- Views: 946
Re: Why isn't there a Model T Register?
Well, this is going no were.
This car was last seen on the MTFCA website....http://www.mtfca.com/discus/messages/257047/288571.html
- Sat Nov 11, 2023 3:41 pm
- Forum: General Discussion Forum
- Topic: Why isn't there a Model T Register?
- Replies: 19
- Views: 946
Re: Why isn't there a Model T Register?
Granted trying to track over 15 million Model Ts, from 1908 to 1927 may seen daunting, but we all know that the total number in 2023/24 is far less than 15 million. The number of folks on this forum and related Motel T forums, probable own a small percentage of the original production. To say that i...
- Sat Nov 11, 2023 11:49 am
- Forum: General Discussion Forum
- Topic: Why isn't there a Model T Register?
- Replies: 19
- Views: 946
Why isn't there a Model T Register?
Why isn't there a Model T Register? Every so often the question is asked, "Any one know the whereabouts of this car?" The a picture or maybe, if available a motor number ( 1 to 15176888) I believe those from 1909-1-09 (1 to 14161) may be covered and found. see- https://earlyfordregistry.com/ But all...
- Wed Nov 08, 2023 9:21 am
- Forum: General Discussion Forum
- Topic: Coil box amperage ?
- Replies: 6
- Views: 364
Re: Coil box amperage ?
To add to the discussion, and of course be criticized, if you observe your ampere meter, set the ignition switch to battery, and turn your motor by hand crank, with the coil buzzing, you should observe that the meter will show a discharge of about 2 amps, or one line to the left (a discharge). Of co...
- Tue Oct 31, 2023 9:44 am
- Forum: General Discussion Forum
- Topic: Another photo- Mifflin County Pennsylvania.
- Replies: 0
- Views: 276
Another photo- Mifflin County Pennsylvania.
Garage: Stine Bros., McVeytown
Source: Mifflin County Historical Society Library Archives
Source: Mifflin County Historical Society Library Archives
- Sat Oct 21, 2023 11:19 am
- Forum: General Discussion Forum
- Topic: Chassis wiring diagram
- Replies: 8
- Views: 393
Re: Chassis wiring diagram
I didn't know it was that comprehensive. During the age of the Model T there were many, many publications to show how to keep a Model T alive and running. All the major motor journals, from the sale of the first Model T to the Introduction of the Model A, presented to the readers Q and A about the "...
- Wed Oct 11, 2023 9:56 am
- Forum: General Discussion Forum
- Topic: Free Start - Interesting what I discovered
- Replies: 47
- Views: 1844
Re: Free Start - Interesting what I discovered
So, is a back-fire from the exhaust the opposite of a free start?
- Tue Oct 10, 2023 4:14 pm
- Forum: General Discussion Forum
- Topic: Model T philosophy: What is a restoration?
- Replies: 89
- Views: 11171
Re: Model T philosophy: What is a restoration?
If you know the provenance - big word - it would be restored accordingly. If the car was indeed belonging to the inventor of the automobile, then his modifications would be part of the restoration. -- How would you have restored this one owner 1919 Ford Model T Coupe? -- hford.png --- Note: The eng...
- Wed Oct 04, 2023 5:04 pm
- Forum: General Discussion Forum
- Topic: Getting Your Ford Fixed
- Replies: 3
- Views: 454
Re: Getting Your Ford Fixed
The early accounts would appear that Ford was setting up a proprietary shop repair network. Ford publications aimed at owners warned about using counterfeit, non-approved parts.
- Wed Oct 04, 2023 2:58 pm
- Forum: General Discussion Forum
- Topic: The Model T ad that started it all
- Replies: 13
- Views: 721
Re: The Model T ad that started it all
The new Ford was anticipated by many. But was there a cart before the horse situation. Did the FMC start selling the new Ford before advertising in the Post? Who purchased the first Model T Ford? From 2022 - Post by Been Here Before » Sat Mar 19, 2022 7:35 pm According to a brief search or newspaper...
- Tue Oct 03, 2023 7:40 pm
- Forum: General Discussion Forum
- Topic: The Model T ad that started it all
- Replies: 13
- Views: 721
Re: The Model T ad that started it all
Or was it?
Star Tribune, Minneapolis, Minnesota · Wednesday, January 08, 1908
Star Tribune, Minneapolis, Minnesota · Wednesday, January 08, 1908
- Fri Sep 29, 2023 5:09 pm
- Forum: General Discussion Forum
- Topic: Starting a Model T
- Replies: 10
- Views: 708
Re: Starting a Model T
Hummm...a free start is possible because --- why? One of the cylinders has compressed fuel, and the timer is "on" that cylinder and the cylinder is not leaking down. Turning on the key allows to coil/timer to make contact ( even a slight knock on the fender to move the timer in to position to make c...
- Wed Sep 27, 2023 11:37 am
- Forum: General Discussion Forum
- Topic: Starting a Model T
- Replies: 10
- Views: 708
Starting a Model T
With my T, I start with the starter, Once started, I switch to the magneto. Or, to impress by standers, I will turn on the key, using the battery, and give a quick jerk of the starter handle crank and the motor will start. Not a rapid turning. So, I have noticed questions about slow turning starters...
- Sun Sep 24, 2023 12:14 pm
- Forum: General Discussion Forum
- Topic: Fabric covered wooden body speedster plans
- Replies: 14
- Views: 998
Re: Fabric covered wooden body speedster plans
As for body construction for a vintage automobile circa 1922 this may be of interest:
https://www.google.com/books/edition/Th ... frontcover
Principals of Automobile Body Design. K. Forbes.
https://www.google.com/books/edition/Th ... frontcover
Principals of Automobile Body Design. K. Forbes.
- Thu Sep 21, 2023 3:27 pm
- Forum: General Discussion Forum
- Topic: Are Model T drivers/owners safe?
- Replies: 15
- Views: 933
Are Model T drivers/owners safe?
From current MOTOR: There are many questions about the advent of autonomous trucks. One of the most obvious has always been who, exactly, will take care of a driverless truck if there are no humans on board? With EVs and autonomous vehicles now the "Thing", are drivers of vintage motor vehicles any ...
- Sun Sep 17, 2023 10:11 am
- Forum: General Discussion Forum
- Topic: Street rods? At Fall Hershey?
- Replies: 10
- Views: 708
Re: Street rods? At Fall Hershey?
Yes the Antique car hobby is changing. 1. Seeing a 1966 Nova with an antique plate. 2. Rat Rods as allowable transportation. 3. Automobile museums selling older collections so a newer classic can be considered as antique automobiles. 4. Yes BOB, Hershey is mainly a classy car show. Selling the colle...
- Sun Sep 10, 2023 10:54 am
- Forum: General Discussion Forum
- Topic: A new DIY electronic coil tester.
- Replies: 319
- Views: 359360
Re: A new DIY electronic coil tester.
I understand that, but we're talking about the gap for the tester. A .035 gap doesnt necessarily mean you have a strong enough coil spark. I believe the gap for a HCCT is 1/4" Depending on your source, it requires about 15,000 volts to jump an air gap of 1/2 to 1 inch. So the 1/4 inch may be the th...
- Sat Sep 09, 2023 3:10 pm
- Forum: General Discussion Forum
- Topic: A new DIY electronic coil tester.
- Replies: 319
- Views: 359360
Re: A new DIY electronic coil tester.
Wouldnt it be better? Isnt the spark supposed to jump 1/4"? 1/4 inch is a gap of .25 inch. Suggested plug gap for a Model T Motor (stock) .031" - .035" I understand that, but we're talking about the gap for the tester. A .035 gap doesnt necessarily mean you have a strong enough coil spark. I believ...
- Sat Sep 09, 2023 1:48 pm
- Forum: General Discussion Forum
- Topic: A new DIY electronic coil tester.
- Replies: 319
- Views: 359360
Re: A new DIY electronic coil tester.
1/4 inch is a gap of .25 inch.speedytinc wrote: ↑Sat Sep 09, 2023 1:06 pmWouldnt it be better?
Isnt the spark supposed to jump 1/4"?
Suggested plug gap for a Model T Motor (stock) .031" - .035"
- Sat Sep 09, 2023 1:04 pm
- Forum: General Discussion Forum
- Topic: What's the Secret to a Quiet T?
- Replies: 25
- Views: 1331
Re: What's the Secret to a Quiet T?
Museum Quality Model T's are very, very quiet.
- Sat Sep 09, 2023 1:01 pm
- Forum: General Discussion Forum
- Topic: A new DIY electronic coil tester.
- Replies: 319
- Views: 359360
Re: A new DIY electronic coil tester.
Of course.Myxr6turbo wrote: ↑Sat Sep 09, 2023 4:15 amWould it be ok to use a model T spark plug instead of 2 pins to create the spark?
- Sun Sep 03, 2023 12:51 pm
- Forum: General Discussion Forum
- Topic: Hershey Fall Meet Treasure Hunting Map
- Replies: 16
- Views: 2225
Re: Hershey Fall Meet Treasure Hunting Map
For us it is a 96 mile drive.
Best to get there, park, purchase a programme, and spend the day with programme and map searching items of interest. Good day trip.
Best to get there, park, purchase a programme, and spend the day with programme and map searching items of interest. Good day trip.
- Sun Sep 03, 2023 10:28 am
- Forum: General Discussion Forum
- Topic: Feeling pretty beat down, I just want to try and enjoy the car!!
- Replies: 27
- Views: 1594
Re: Feeling pretty beat down, I just want to try and enjoy the car!!
" Perfection is the enemy of progress."
Churchill eh?
Churchill eh?
- Fri Sep 01, 2023 11:03 am
- Forum: General Discussion Forum
- Topic: Starter speed
- Replies: 11
- Views: 543
Re: Starter speed
In theory, for a motor to start and run, one needs fuel, compression, and ignition (spark). With a healthy motor, a quick motion of a starter handle will start a T motor.
With a starter the same will occur. It should not take high rpms of the starter.
With a starter the same will occur. It should not take high rpms of the starter.
- Tue Aug 29, 2023 10:53 am
- Forum: General Discussion Forum
- Topic: FYI Ford Vapourizer
- Replies: 0
- Views: 194
- Sun Aug 20, 2023 10:14 am
- Forum: General Discussion Forum
- Topic: EMP
- Replies: 37
- Views: 1743
Re: EMP
In 2010 the question was asked: EMP and Model Ts
https://www.mtfca.com/discus/messages/1 ... 1292368743
The bottom line may be, will you be able to locate enough Petrol -Gasoline to operate the motor.
https://www.mtfca.com/discus/messages/1 ... 1292368743
The bottom line may be, will you be able to locate enough Petrol -Gasoline to operate the motor.
- Fri Aug 18, 2023 11:09 am
- Forum: General Discussion Forum
- Topic: What will a stock T do in the quarter mile?
- Replies: 19
- Views: 1202
Re: What will a stock T do in the quarter mile?
A speedster is a stock Model T. Huh, who wouldhave thought? This was never a "stock Model T" thing. Any T, stock or modified, is welcome to log a time. The Registry has fields to differentiate to some degree. Everyone is welcome to participate. Registry www.tinyurl.com/modeltquartermileregistry Sor...
- Fri Aug 18, 2023 9:58 am
- Forum: General Discussion Forum
- Topic: What will a stock T do in the quarter mile?
- Replies: 19
- Views: 1202
Re: What will a stock T do in the quarter mile?
A speedster is a stock Model T. Huh, who wouldhave thought?
- Tue Aug 15, 2023 11:46 am
- Forum: General Discussion Forum
- Topic: slowwwwwwwwwwwwwwwww
- Replies: 12
- Views: 835
Re: slowwwwwwwwwwwwwwwww
As stated 13 August 2023:
So some are having issues with loading and viewing the MTFCA forum and web site.
I find that if I use reverse and back up to the site, it loads better. Or it could be the bad roads and mud under the wheels.(15Aug2023)
So some are having issues with loading and viewing the MTFCA forum and web site.
I find that if I use reverse and back up to the site, it loads better. Or it could be the bad roads and mud under the wheels.(15Aug2023)
- Tue Aug 15, 2023 11:39 am
- Forum: General Discussion Forum
- Topic: Problems with loading and viewing the Site?
- Replies: 2
- Views: 341
Re: Problems with loading and viewing the Site?
Yep gravity makes going down easier than going up....
- Sun Aug 13, 2023 10:17 am
- Forum: General Discussion Forum
- Topic: Problems with loading and viewing the Site?
- Replies: 2
- Views: 341
Problems with loading and viewing the Site?
So some are having issues with loading and viewing the MTFCA forum and web site.
I find that if I use reverse and back up to the site, it loads better.
I find that if I use reverse and back up to the site, it loads better.
- Sat Aug 12, 2023 1:33 pm
- Forum: General Discussion Forum
- Topic: Strob-O-Spark on eBay - It's a real Hoot !!
- Replies: 10
- Views: 1051
Re: Strob-O-Spark on eBay - It's a real Hoot !!
Making decals?
Here have at it.
Here have at it.
- Sat Aug 12, 2023 12:30 pm
- Forum: General Discussion Forum
- Topic: Strob-O-Spark on eBay - It's a real Hoot !!
- Replies: 10
- Views: 1051
Re: Strob-O-Spark on eBay - It's a real Hoot !!
I wish I could get replacement decals for my Strobe-a-Spark. Mine have worn off. Dan This is off topic I am certain, a quick google search with - custom reproduction decals - indicated that there are places where replacement decals for your strobe-a-spark could be reproduced. Maybe others are in th...
- Sat Aug 12, 2023 10:46 am
- Forum: General Discussion Forum
- Topic: Strob-O-Spark on eBay - It's a real Hoot !!
- Replies: 10
- Views: 1051
Re: Strob-O-Spark on eBay - It's a real Hoot !!
Interesting read, apparently the item being sold can be used on all cars.
According to the Strobo-Spark instructions, this device is better than the HCCT. I guess there is even something better on the market?
According to the Strobo-Spark instructions, this device is better than the HCCT. I guess there is even something better on the market?
- Tue Aug 08, 2023 6:31 pm
- Forum: General Discussion Forum
- Topic: 2023 Hershey Eastern Fall Nationals - Deadline in 7 days!
- Replies: 0
- Views: 213
2023 Hershey Eastern Fall Nationals - Deadline in 7 days!
From an email - FYI 2023 Hershey Show Car Registrations Registration Deadline: August 15, 2023 Show your car in any of these classes: DPC • HPOF • Class Judging Do Not Judge! Register online at members.aaca.org or call 717-534-1910 for a registration packet Fall Hershey Show Car Registration email:...
- Sat Aug 05, 2023 8:50 am
- Forum: General Discussion Forum
- Topic: Magneto Battery Charger
- Replies: 30
- Views: 1521
Re: Magneto Battery Charger
Holy cow, you guys are working awfully hard at "improving" a two component design that already has proven outstanding field service life and essentially idiot-proof safety parameters. Doesn't gravity need improving or something else that all mankind can make use of? I hear the Monongahela Iron Ingo...
- Fri Aug 04, 2023 10:06 am
- Forum: General Discussion Forum
- Topic: Magneto Battery Charger
- Replies: 30
- Views: 1521
Re: Magneto Battery Charger
Hold on. May be George M. has a point. When the supply of incandescent 1156 bulb are depleted what will be a replacement? There are 1156 LED bulbs available. And by design they have a current limiting resistor. "The 1156 single-contact bulb uses powerful LEDs to emit up to 420 lumens of illumination...
- Thu Aug 03, 2023 4:09 pm
- Forum: General Discussion Forum
- Topic: Magneto Battery Charger
- Replies: 30
- Views: 1521
Re: Magneto Battery Charger
I can only lead the horse to water...
Yes, but some time, that wack with a 2x4 (not one of those 1.5″ x 3.5″), can make a difference.
So, what is the life or hours of a 1156 as a current limiter?
Yes, but some time, that wack with a 2x4 (not one of those 1.5″ x 3.5″), can make a difference.
So, what is the life or hours of a 1156 as a current limiter?
- Thu Aug 03, 2023 3:20 pm
- Forum: General Discussion Forum
- Topic: Magneto Battery Charger
- Replies: 30
- Views: 1521
Re: Magneto Battery Charger
Ron Patterson's or John Regan's answer at the end of this thread answers the question as to why a bulb and not a resistor: https://www.mtfca.com/discus/messages/411944/494540.html?1416288062 This doesn't answer my question. There are industrial grade resistors that will change resistance - temperat...
- Thu Aug 03, 2023 1:48 pm
- Forum: General Discussion Forum
- Topic: Magneto Battery Charger
- Replies: 30
- Views: 1521
Magneto Battery Charger
Following the discussion about using the magneto to charge battery, why can't a wire resistor of equal cold resistance of a 1156 12.8 volt bulb be used? As for overload or short protection a fuse in series. The diode from google search, is a 1N5402 diode which is rated at 3 amps and 200V peak repeti...
- Sun Jul 30, 2023 8:23 pm
- Forum: General Discussion Forum
- Topic: quick test coils
- Replies: 15
- Views: 821
Re: quick test coils
Wow! How do you field test found induction coils? A $400.00 tester, or a simple continuity tester?
- Wed Jul 26, 2023 4:09 pm
- Forum: General Discussion Forum
- Topic: Waterless Radiator Coolant
- Replies: 70
- Views: 3371
Re: Waterless Radiator Coolant
I use 100% glycol, the green stuff. From a past post 23 July 2023 - From its introduction to aviation in the 1940s, it was found (Ethylene Glycol) to have an advantage over water as a coolant, The introduction of ethylene glycol coolant, which with its higher boiling point (and higher coolant temper...
- Wed Jul 26, 2023 1:37 pm
- Forum: General Discussion Forum
- Topic: Waterless Radiator Coolant
- Replies: 70
- Views: 3371
Re: Waterless Radiator Coolant
Some information may be missing-
Coolant effects of water, kerosene, and 100% glycol.
https://www.mtfca.com/discus/messages/5 ... 1463096065
Coolant effects of water, kerosene, and 100% glycol.
https://www.mtfca.com/discus/messages/5 ... 1463096065
- Tue Jul 25, 2023 8:26 pm
- Forum: General Discussion Forum
- Topic: Waterless Radiator Coolant
- Replies: 70
- Views: 3371
Re: Waterless Radiator Coolant
Well the horse was dead in 1904. The company offered a "water-less cooled engine." But it didn't sell well.
https://www.mtfca.com/discus/messages/3 ... 1380300717
https://www.mtfca.com/discus/messages/3 ... 1380300717
- Tue Jul 25, 2023 9:26 am
- Forum: General Discussion Forum
- Topic: Waterless Radiator Coolant
- Replies: 70
- Views: 3371
Re: Waterless Radiator Coolant
As stated: Our 1922 Coupe has always been cooled since the 1960s by using 100 % Ethylene Glycol (EG) (the Green Stuff)-- I would guess that that qualify as "Water-less Coolant." Reviewing the MSDS sheets for "Evans Water-less Coolant" this information was presented the product is for keeping an engi...
- Mon Jul 24, 2023 4:54 pm
- Forum: General Discussion Forum
- Topic: When to test coils
- Replies: 23
- Views: 1785
Re: When to test coils
Reviewing the printed literature of years past, indicate to have dry cell used for ignition, the 1.3 amp draw was for battery life.
- Sun Jul 23, 2023 5:11 pm
- Forum: General Discussion Forum
- Topic: Waterless Radiator Coolant
- Replies: 70
- Views: 3371
Re: Waterless Radiator Coolant
I have mentioned this before, once on the old Forum Format, and maybe on the newer forum. Our 1922 Coupe has always been cooled since the 1960s by using 100 % Ethylene Glycol (EG) (the Green Stuff)-- I would guess that that qualify as "Waterless Coolant." From its introduction to aviation in the 194...
- Fri Jul 21, 2023 9:00 am
- Forum: General Discussion Forum
- Topic: Engine splash pans causing boiling over?
- Replies: 20
- Views: 1443
Re: Engine splash pans causing boiling over?
Interesting... I have a dumb question about this statement... ""It's possible that the engine splash pans are contributing to the overheating issue..., but if they are installed improperly or are not functioning correctly, they can actually impede airflow and cause the engine to overheat."" How can ...
- Fri Jul 21, 2023 8:44 am
- Forum: General Discussion Forum
- Topic: Our cars and parts should increase in value
- Replies: 8
- Views: 817
Re: Our cars and parts should increase in value
Depending on the sunken ships site, it may well be a grave site. Especially if it was a ship of war being salvaged for the metal.
Grave robing is alive and well on the high seas.
Grave robing is alive and well on the high seas.
- Wed Jul 19, 2023 2:19 pm
- Forum: General Discussion Forum
- Topic: Favorite Model T
- Replies: 17
- Views: 1146
Re: Favorite Model T
My favourite Model T would be a closed version . Smallish in size, limited passenger space. No frills and it has to be black, no brass to maintain. A 1919-1922 Coupe.
- Wed Jul 19, 2023 8:43 am
- Forum: General Discussion Forum
- Topic: Magneto Batttery charger
- Replies: 17
- Views: 1136
Re: Magneto Batttery charger
Everything else is just another bone to pick and end up pushing someone else's post on another subject, with real questions further down the pike, and is not helping Ron in any way Every subject on the Form is open to TMI. And by the additional information we may learn something. Education is based ...
- Tue Jul 18, 2023 2:14 pm
- Forum: General Discussion Forum
- Topic: Magneto Batttery charger
- Replies: 17
- Views: 1136
Re: Magneto Batttery charger
Any one review patents for a magneto battery trickle charger?
Appears that one was filed for in the 1980s.
https://patents.google.com/patent/US4417195A/en
Appears that one was filed for in the 1980s.
https://patents.google.com/patent/US4417195A/en
- Sun Jul 16, 2023 10:34 am
- Forum: General Discussion Forum
- Topic: Repairing metal
- Replies: 11
- Views: 940
Repairing metal
I know some on the Forum are hot to trot when it comes to new toys.
Repairing body panels, mig or oxy-acelyne have been popular.
I see a new welder is on the market using a lazer diode. Appears to give nice clean welds, any one using such a tool for current restoration? What are your results?
Repairing body panels, mig or oxy-acelyne have been popular.
I see a new welder is on the market using a lazer diode. Appears to give nice clean welds, any one using such a tool for current restoration? What are your results?