Search found 137 matches
- Fri Feb 25, 2022 11:39 am
- Forum: General Discussion Forum
- Topic: How do I balance brakes?
- Replies: 3
- Views: 998
Re: How do I balance brakes?
Thanks for the great refresher....going to go check mine right away....
- Tue Feb 22, 2022 2:46 pm
- Forum: General Discussion Forum
- Topic: ball park paint cost???
- Replies: 51
- Views: 5336
Re: ball park paint cost???
It has become very clear to me that I should have listened to Mom and Dad and made life work a Rocket Scientist ! ( or a painter as $17000 is out of this world!!!! ).....
- Sun Feb 20, 2022 9:35 pm
- Forum: General Discussion Forum
- Topic: ball park paint cost???
- Replies: 51
- Views: 5336
ball park paint cost???
What would a person expect to pay for show paint job on 26 T touring? thanks
- Sun Jan 09, 2022 9:37 pm
- Forum: General Discussion Forum
- Topic: Marietta, March 5, 2022
- Replies: 18
- Views: 3830
Re: Marietta, March 5, 2022
Ask anyone where is the Fairgrounds and that is where it is held...
- Fri Jan 07, 2022 7:58 pm
- Forum: General Discussion Forum
- Topic: Need for a dedicated Speedster Forum ?
- Replies: 25
- Views: 3505
Re: Need for a dedicated Speedster Forum
sorry post in wrong place
- Thu Dec 30, 2021 7:22 pm
- Forum: General Discussion Forum
- Topic: WHAT HAVE YOU DONE WITH YOUR MODEL T IN DECEMBER
- Replies: 63
- Views: 8018
Re: WHAT HAVE YOU DONE WITH YOUR MODEL T IN DECEMBER
For all you youngsters out there Steve is using an oxy-acetylene torch (looks to be a medium duty with a no. 2 tip) not a Mig or Tig..old tools for old car repairs....Steve is that a coat hanger? ... ...
- Tue Dec 28, 2021 10:32 am
- Forum: General Discussion Forum
- Topic: Built From Scratch Model T's
- Replies: 39
- Views: 4900
Re: Built From Scratch Model T's
and to beat it all it works
- Sat Dec 25, 2021 11:55 am
- Forum: General Discussion Forum
- Topic: Marietta, March 5, 2022
- Replies: 18
- Views: 3830
Re: Marietta, March 5, 2022
If you miss this show you will be sorry....a lot of outside parts too....
- Sat Dec 25, 2021 11:13 am
- Forum: General Discussion Forum
- Topic: Fan reassembly
- Replies: 25
- Views: 2156
Re: Fan reassembly
Ok, I will be the bad guy here sorry. Most of the T's I have found have a worn fan shaft and pulley and puke out whatever you lube you put in them..My case is this, I bought a new radiator from brass works and was running what I thought was a good fan setup after reading another post here I checked ...
- Fri Dec 24, 2021 10:01 pm
- Forum: General Discussion Forum
- Topic: Merry Christmas to all
- Replies: 31
- Views: 4172
Re: Merry Christmas to all
MERRY CHRISTMAS to all.............
- Wed Dec 15, 2021 6:25 pm
- Forum: General Discussion Forum
- Topic: Different T Things
- Replies: 81
- Views: 12540
Re: Different T Things
turn that baby down and put a ball bearing on it?
- Fri Oct 01, 2021 9:35 pm
- Forum: General Discussion Forum
- Topic: Forced To Sell
- Replies: 92
- Views: 14564
Re: Forced To Sell
Great idea...set it up and I will find some parts I can part with....
- Tue Sep 21, 2021 6:11 pm
- Forum: Classifieds - Parts
- Topic: Sold! 3-21” Roller tires, make me an offer
- Replies: 4
- Views: 1462
Re: FS 3-21” Roller tires, make me an offer
Are tires sill for sale?
- Sat Sep 18, 2021 11:11 pm
- Forum: General Discussion Forum
- Topic: Forced To Sell
- Replies: 92
- Views: 14564
Re: Forced To Sell
I'm in check in the mail...
- Sat Aug 28, 2021 8:55 pm
- Forum: General Discussion Forum
- Topic: Tire change tool, what do you use?
- Replies: 25
- Views: 3190
Re: Tire change tool, what do you use?
I use a saws-all and a sharp chisel....
- Fri Aug 20, 2021 7:13 pm
- Forum: Classifieds - Parts
- Topic: Wanted Horn reed
- Replies: 9
- Views: 1878
Re: Wanted Horn reed
good luck...
- Sat Aug 14, 2021 5:44 pm
- Forum: General Discussion Forum
- Topic: Anyone remember building one of these as a boy?
- Replies: 39
- Views: 5350
Re: Anyone remember building one of these as a boy?
My mom saved this .I built it 55 years ago, I found it when we sold the house.that is what moms do..
- Sun Jul 11, 2021 9:07 am
- Forum: General Discussion Forum
- Topic: Photo of the day
- Replies: 5
- Views: 1611
Re: Photo of the day
stack them up like blocks and put a roof on them... call it the motor shed
- Wed Jul 07, 2021 3:07 pm
- Forum: General Discussion Forum
- Topic: Feeling stupid - hard starting
- Replies: 126
- Views: 14381
Re: Feeling stupid - hard starting
To find intake leak with car running spray WD40 around manifold ...if you see it suck it in or hear change in running it is a leak....you probably already knew that...
- Mon Jun 14, 2021 8:17 pm
- Forum: Classifieds - Parts
- Topic: WTB model t ford hub caps for hay wagon
- Replies: 6
- Views: 1809
Re: WTB model t ford hub caps for hay wagon
Bob, the hub caps were in todays mail..THANKS I will send you payment just let me know how much? thanks again rl
- Sun Jun 13, 2021 3:33 pm
- Forum: General Discussion Forum
- Topic: Feeling stupid - hard starting
- Replies: 126
- Views: 14381
Re: Feeling stupid
brush on new day not making good contact...install good ford cap and roller...rl
- Mon Jun 07, 2021 7:35 pm
- Forum: Classifieds - Parts
- Topic: WTB model t ford hub caps for hay wagon
- Replies: 6
- Views: 1809
Re: WTB model t ford hub caps for hay wagon
they look like great to me...pm me with details thanks....
- Sun Jun 06, 2021 9:05 am
- Forum: General Discussion Forum
- Topic: WHAT HAVE YOU DONE WITH YOUR MODEL T IN JUNE
- Replies: 41
- Views: 6439
Re: WHAT HAVE YOU DONE WITH YOUR MODEL T IN JUNE
making a hay wagon out of it
- Fri Jun 04, 2021 3:52 pm
- Forum: Classifieds - Parts
- Topic: WTB model t ford hub caps for hay wagon
- Replies: 6
- Views: 1809
Re: WTB model t ford hub caps for hay wagon
still looking for hubcaps
- Tue Jun 01, 2021 8:29 pm
- Forum: Classifieds - Parts
- Topic: WTB model t ford hub caps for hay wagon
- Replies: 6
- Views: 1809
WTB model t ford hub caps for hay wagon
I need 4 model T ford hub caps for wood wheels to put on my hay wagon project...forgot to pick up at luray...( hay wagon grade ) thanks rl
- Sun May 23, 2021 4:19 pm
- Forum: General Discussion Forum
- Topic: Model T Running Board Stairs
- Replies: 12
- Views: 2353
Re: Model T Running Board Stairs
Very good ideas....great thinking....I just need more junk...don't trip over that pump handle
- Sun May 23, 2021 4:16 pm
- Forum: General Discussion Forum
- Topic: Model t and ethanol
- Replies: 25
- Views: 3823
Re: Model t and ethanol
I use aviation gas in all my toys in storage and lo use...it will not go bad...and it runs very well and smells like old memories...
- Wed May 19, 2021 8:31 pm
- Forum: Classifieds - Parts
- Topic: WTB hitch that clamps to front axle to make wagon
- Replies: 3
- Views: 1315
WTB hitch that clamps to front axle to make wagon
Want to buy a hitch that clamps to front axle to convert chassis to a farm wagon...PM me here thanks...http://www.mtfca.com/discus/messages/17 ... 1309660443
- Sat May 15, 2021 7:34 pm
- Forum: General Discussion Forum
- Topic: Look who I found at Luray
- Replies: 9
- Views: 2640
Re: Look who I found at Luray
I bought a few parts from Jonah to further his model t project...I hope he sticks with it...Good luck RL
- Mon May 03, 2021 9:03 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: SOLD SOLD SOLD SOLD
SOLD SOLD SOLD SOLD
- Mon May 03, 2021 6:07 am
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
[image]
[/image]- Wed Apr 28, 2021 6:00 pm
- Forum: General Discussion Forum
- Topic: motometer
- Replies: 1
- Views: 975
motometer
Are there any parts stores with a chrome motor meter for a T? and are T and A the same size? thanks rl
- Tue Apr 27, 2021 8:14 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
I am going to have these sandblast should I have them primed or bring to swap meet bare metal? these will be for sale or trade for T parts....any questions PM me here or e-mail me...
- Sat Apr 24, 2021 7:33 pm
- Forum: General Discussion Forum
- Topic: What is your favorite part of a Model T Ford?
- Replies: 56
- Views: 7054
Re: What is your favorite part of a Model T Ford?
Making it back home .....
- Tue Apr 20, 2021 7:32 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
jonah, sent you e-mail rl
- Sun Apr 18, 2021 6:50 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
I am planning to attend The Luray Swap Meet and can deliver the wheels to the meet...I need wood wheels , 21" rims, a frame any year, used tires, tubes, drive shaft, front and rear springs, rear end none of which need to be anywhere close perfect....I want to build a T flat wagon to pull grandkids a...
- Sun Apr 18, 2021 8:53 am
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
they are better than the photo..........these were in dry storage
- Sat Apr 17, 2021 10:32 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
- Sat Apr 17, 2021 3:07 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
what you see is many many coats of chipped paint....the wheels are in great shape...spokes are tight and solid.....
- Fri Apr 16, 2021 6:38 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
Re: wire wheels
anyone want to guess what they are worth????? I have no idea.....thanks
- Thu Apr 15, 2021 7:06 pm
- Forum: Classifieds - Parts
- Topic: SOLD SOLD SOLD SOLD
- Replies: 27
- Views: 6039
SOLD SOLD SOLD SOLD
[/attachment]I have 2 buffalo wire wheels good shape (tire on one is 30 x 3 1/2 ) are these worth anything? they look good enough to use...look solid....need blasting to make really nice...
- Sun Apr 04, 2021 5:40 pm
- Forum: General Discussion Forum
- Topic: Broken fan shaft bolt destroyed my radiator
- Replies: 56
- Views: 7986
Re: Broken fan shaft bolt destroyed my radiator
I bought a new pulley and bolt in jan. just to prevent the exact thing to my new $900 radiator on my 26....you have to dress the bolt just a bit to fit the bearings but worth the effort...Well foot in my mouth ...I just finished drilling a cotter pin hole in the new shaft....but I did have a lock wa...
- Sat Apr 03, 2021 7:29 pm
- Forum: General Discussion Forum
- Topic: Cleaning brass parts
- Replies: 16
- Views: 3071
Re: Cleaning brass parts
Get a bottle of Hines Ketchup....works great won't scratch....don't laugh until you try it....
- Fri Apr 02, 2021 11:26 pm
- Forum: General Discussion Forum
- Topic: A name is?
- Replies: 32
- Views: 5466
Re: A name is?
I like halftracks....
- Fri Apr 02, 2021 10:34 pm
- Forum: General Discussion Forum
- Topic: bending pedals
- Replies: 17
- Views: 2662
Re: bending pedals
john warren that bend is a fantastic idea... I will do mine that way....thanks
- Thu Apr 01, 2021 2:06 pm
- Forum: General Discussion Forum
- Topic: 26/27 bed question
- Replies: 6
- Views: 1399
Re: 26/27 bed question
I never like the look of that battery panel angled out so when I repaired the bed on my 26 I replaced the rusted front panel with one for a model A ...which fit great.....the battery can be removed from the under side of car....
- Thu Apr 01, 2021 1:48 pm
- Forum: General Discussion Forum
- Topic: As requested: Curly Shock Photos
- Replies: 8
- Views: 2125
Re: As requested: Curly Shock Photos
Why is there a pan under the car in the 5th picture ???? Glue trap for a mouse???
- Sat Mar 27, 2021 9:52 pm
- Forum: General Discussion Forum
- Topic: Push Button Starter Switch
- Replies: 19
- Views: 3308
Re: Push Button Starter Switch
call a military jeep parts house like Peter Debella jeep parts and get a nos switch for a M151 jeep ....these are 24volt end of problem
- Thu Mar 18, 2021 4:46 pm
- Forum: General Discussion Forum
- Topic: rear axle key jb welded in?
- Replies: 34
- Views: 4764
Re: rear axle key jb welded in?
JB welded on did not work...welded one did not work...found used axle it worked
- Wed Mar 17, 2021 5:42 pm
- Forum: General Discussion Forum
- Topic: What's wrong in these photos?
- Replies: 27
- Views: 3947
Re: What's wrong in these photos?
the wheels and tires are two different sizes.......
- Mon Mar 15, 2021 7:07 pm
- Forum: General Discussion Forum
- Topic: Post your favorite pictures of a T
- Replies: 52
- Views: 6194
Re: Post your favorite pictures of a T
As found Old school
- Mon Mar 08, 2021 8:51 pm
- Forum: General Discussion Forum
- Topic: A new tool
- Replies: 30
- Views: 4304
Re: A new tool
Let tell you ...don't spray that stuff it will burn your skin...stripper needs to brush on thick to work good....I have used a garden sprayer...but no more...we used aircraft stripper with an accelerator and one pinpoint on your skin will set you on fire....the stuff is just wicked....
- Mon Mar 08, 2021 10:40 am
- Forum: General Discussion Forum
- Topic: A new tool
- Replies: 30
- Views: 4304
Re: A new tool
I bought almost same thing at tractor supply...it was a sand blast gun...but I use it to paint wood fence you adjust air pressure to adjust amount of paint that comes out and in 1 hour I spray more fence than 100 men with a brushes...
- Thu Mar 04, 2021 10:29 am
- Forum: General Discussion Forum
- Topic: Mid-Atlantic Prewar Swap Meet "Luray" May 14 & 15, 2021
- Replies: 12
- Views: 2348
Re: Mid-Atlantic Prewar Swap Meet "Luray" May 14 & 15, 2021
I got my 2nd shot and can't wait ...
- Wed Mar 03, 2021 3:16 pm
- Forum: General Discussion Forum
- Topic: anyone have 26 roadster top pattern?
- Replies: 0
- Views: 472
anyone have 26 roadster top pattern?
I need a pattern or an old takeoff top for a 1926 roadster ....thanks
- Wed Mar 03, 2021 2:50 pm
- Forum: General Discussion Forum
- Topic: Installing the hogshead: Is there a better way?
- Replies: 23
- Views: 3393
Re: Installing the hogshead: Is there a better way?
why not magnetize the nut and washer ????? might not fall so far in tranny ?????
- Wed Mar 03, 2021 2:22 pm
- Forum: Classifieds - Parts
- Topic: 26 coil box lid sold
- Replies: 1
- Views: 461
Re: 26 coil box lid
Is that an origional lid or a repro????? thanks
- Sun Feb 28, 2021 4:58 pm
- Forum: General Discussion Forum
- Topic: Installing the hogshead: Is there a better way?
- Replies: 23
- Views: 3393
Re: Installing the hogshead: Is there a better way?
Steve, I bought the clamp years ago, never did work for me...use wires just be careful...I hold one end with needle nose and cut with side cutters then pull out the wire...works for me...
- Tue Feb 23, 2021 7:38 pm
- Forum: General Discussion Forum
- Topic: Steel top for roadster ???
- Replies: 4
- Views: 1219
Steel top for roadster ???
Has anyone ever built a metal top on the ford top bows.. anyone have pictures? thinking of building a top that would be removable .....thanks
- Sun Feb 21, 2021 5:13 pm
- Forum: Classifieds - Parts
- Topic: SUNDAY SWAP MEET
- Replies: 8
- Views: 2017
Re: SUNDAY SWAP MEET
Mark, I will take #2 and #3 will call you monday am ...thanks
- Fri Feb 19, 2021 8:11 pm
- Forum: General Discussion Forum
- Topic: What to you, gives a Model T its charm?
- Replies: 72
- Views: 8575
Re: What to you, gives a Model T its charm?
Spokes...Horns...Radiator...Sounds...Fear
- Tue Feb 02, 2021 3:05 pm
- Forum: Classifieds - Parts
- Topic: Want To Buy.... removable hand crank accessory
- Replies: 21
- Views: 3685
Re: Want To Buy.... removable hand crank accessory
could you make a sketch of it? to give us an idea....or explain how it works...
- Sat Jan 30, 2021 11:19 am
- Forum: General Discussion Forum
- Topic: New Langs catalog came today
- Replies: 29
- Views: 4489
Re: New Langs catalog came today
got mine...holiday for me...
- Thu Jan 21, 2021 3:12 pm
- Forum: General Discussion Forum
- Topic: Could this end up to be a problem ????
- Replies: 22
- Views: 3529
Re: this end up to be a problem ????
Steve, i am not sure of the brand sorry...but they seem to be made of a good heavy type of material...
- Thu Jan 21, 2021 11:24 am
- Forum: General Discussion Forum
- Topic: Could this end up to be a problem ????
- Replies: 22
- Views: 3529
Re: this end up to be a problem ????
question is, has anyone else had this problem...me for one no....I get my long stem rubber tubes from langs and have never had any problems....some other suppliers the rubber stem is too short that makes it hard to air up...my 2 cents ...
- Tue Jan 12, 2021 6:58 pm
- Forum: General Discussion Forum
- Topic: Marietta Swap Meet Cancelled
- Replies: 3
- Views: 1563
Re: Marietta Swap Meet Cancelled
I hope they can do something this summer or fall.....this is a great swap meet....
- Mon Jan 11, 2021 10:14 pm
- Forum: Classifieds - Parts
- Topic: FS set of RM brakes
- Replies: 17
- Views: 2871
Re: FS set of RM brakes
jonah, if those are for a 26 27 that is what your car is ...you may want to use them on your car????
- Tue Jan 05, 2021 7:34 pm
- Forum: General Discussion Forum
- Topic: What other than normal gas, can you run your T on?
- Replies: 31
- Views: 4429
Re: What other than normal gas, can you run your T on?
when natural gas (well head gas ) is compressed for shipping thru a pipeline as it heats and goes thru the cold pipe a sweat much like water droplets on a cola bottle forms inside the pipe and this sweat is caught in what is called a drip kind of a trap and when a person blows off the drip you get a...
- Tue Jan 05, 2021 6:32 pm
- Forum: General Discussion Forum
- Topic: What other than normal gas, can you run your T on?
- Replies: 31
- Views: 4429
Re: What other than normal gas, can you run your T on?
drip gas...aviation gas...anything without alcohol....
- Thu Dec 03, 2020 12:26 pm
- Forum: General Discussion Forum
- Topic: New 21" Split Rims
- Replies: 10
- Views: 2140
Re: New 21" Split Rims
The new rims look great...
- Tue Nov 17, 2020 8:41 pm
- Forum: Classifieds - Parts
- Topic: 26 headlight bar??
- Replies: 3
- Views: 1027
26 headlight bar??
Would anyone have a decent early 1926 headlight bar/fender brace in decent shape ? need the one for fender mounted headlights....thanks
- Thu Nov 12, 2020 9:59 pm
- Forum: Classifieds - Parts
- Topic: Un-Distributor FS
- Replies: 15
- Views: 3565
Re: Un-Distributor FS
I can't see your web site because of the giant we use cookies sign...
- Tue Nov 03, 2020 9:02 pm
- Forum: General Discussion Forum
- Topic: Burlap sack seats?
- Replies: 20
- Views: 3412
Re: Burlap sack seats?
I LOVE the leather seat idea and it was free...looks great...
- Fri Sep 25, 2020 1:54 am
- Forum: General Discussion Forum
- Topic: Found this not so old pic...
- Replies: 28
- Views: 4349
Re: Found this not so old pic...
looks like the spruce goose...
- Sat Sep 05, 2020 12:21 pm
- Forum: General Discussion Forum
- Topic: glue or screw?
- Replies: 10
- Views: 2223
Re: glue or screw?
I use 3/16 flat head bolts and lock washer and nuts
- Sat Aug 22, 2020 10:40 am
- Forum: OT - Off topic
- Topic: What kind of pocket knife do you carry?
- Replies: 21
- Views: 4042
Re: What kind of pocket knife do you carry?
you guys will have to figure it out....
- Fri Aug 14, 2020 2:34 pm
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
- Wed Aug 12, 2020 8:28 am
- Forum: General Discussion Forum
- Topic: Gas tank repair thoughts/ideas
- Replies: 16
- Views: 4678
Re: Gas tank repair thoughts/ideas
I shined mine up with 80 grit paper and JB weld it then put the white gas tank sealer from snyders and it has been great for over a year now...
- Tue Aug 11, 2020 7:08 pm
- Forum: General Discussion Forum
- Topic: What’s going on here?
- Replies: 13
- Views: 3994
Re: What’s going on here?
I guess the Float-A-Car accessory did not work...the other guy is removing his kit....
- Wed Aug 05, 2020 4:01 pm
- Forum: General Discussion Forum
- Topic: Can we solve a 75-year old mystery?
- Replies: 39
- Views: 9334
Re: Can we solve a 75-year old mystery?
I think the chair object is actually a faded NO Parking sign
- Wed Aug 05, 2020 3:53 pm
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
Re: 1947 dodge 1 ton door latch?
just a bit costly MV clubs good idea...sad thing is I had a spare set of doors 30 years ago and junked them....
- Sun Aug 02, 2020 3:23 pm
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
Re: 1947 dodge 1 ton door latch?
out of stock
- Sat Aug 01, 2020 3:57 pm
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
Re: 1947 dodge 1 ton door latch?
Come on guys, someone has an old dodge on the back 40 that is just rusting away...I need the left and right latches ????? thanks rl
- Sun Jul 26, 2020 2:15 pm
- Forum: General Discussion Forum
- Topic: exhaust manifold replacement
- Replies: 21
- Views: 6305
Re: exhaust manifold replacement
I agree with tightening above, as for gas I run aviation gas (100LL) ....worn out engine runs great...
- Wed Jul 22, 2020 9:14 pm
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
Re: 1947 dodge 1 ton door latch?
please move to top..thanks
- Wed Jul 15, 2020 11:22 am
- Forum: OT - Off topic
- Topic: 1947 dodge 1 ton door latch?
- Replies: 8
- Views: 3597
1947 dodge 1 ton door latch?
Would anyone happen to have a left door latch for a 1947 dodge wd 20 or power wagon they would part with? thanks rl
- Sun Jun 14, 2020 9:28 pm
- Forum: Classifieds - Parts
- Topic: Mid-Atlantic Prewar FALL Swap Meet in LURAY
- Replies: 5
- Views: 2446
Re: Mid-Atlantic Prewar FALL Swap Meet in LURAY
I have marked my calendar....
- Thu May 28, 2020 4:27 pm
- Forum: General Discussion Forum
- Topic: Things Went KLUNK!!! - Rusty Coupe
- Replies: 33
- Views: 8876
Re: Things Went KLUNK!!! - Rusty Coupe
my father told me to tie a bath towel to a magnet then turn engine over slowly and nut will come up...it did...
- Sun May 24, 2020 5:53 pm
- Forum: General Discussion Forum
- Topic: Things Went KLUNK!!! - Rusty Coupe
- Replies: 33
- Views: 8876
Re: Things Went KLUNK!!! - Rusty Coupe
Mine did the same thing ....it dropped a magnet....not nice... put 2 used magnets and took out the coil ring ....now runs good...
- Sun May 24, 2020 5:43 pm
- Forum: General Discussion Forum
- Topic: Shredded lining shows why....
- Replies: 11
- Views: 3914
Re: Shredded lining shows why....
I am not trying to jack your thread. I would like to add I bought and installed a new screen in my truck and the the brakes went soft so I checked the drum temp. and it was close to 400...long story short I drilled the two rear holes out to 5/8 and more oil dumping on my brake drum temp. went down t...
- Fri May 22, 2020 7:31 pm
- Forum: General Discussion Forum
- Topic: Foto of the Day
- Replies: 652
- Views: 171805
Re: Foto of the Day
My finished Lawn Ornament...Eye Candy
y..- Thu May 21, 2020 11:20 am
- Forum: General Discussion Forum
- Topic: Harbor Freight jack stands
- Replies: 28
- Views: 7605
Re: Harbor Freight jack stands
This Jackstand recall is very true! A friend of mine had is his vehicle on these stands and one broke loose, scared him to death and this happened about three months ago..I have six of these and just wrote my friends accident as just one bad stand ....I will stop using mine immediately....there are ...
- Wed May 20, 2020 11:31 am
- Forum: General Discussion Forum
- Topic: Should I get a Model T or A?
- Replies: 25
- Views: 7066
Re: Should I get a Model T or A?
Ok, I may not have been around as long of some of the members here but I do remember 18 years of age....soo buy the Model T or A chicks dig old cars.....park the antique....buy a nice mustang or ? .....and invite the girls over to see your old car....there you have it best of both worlds... ....rl
- Mon May 18, 2020 9:06 pm
- Forum: General Discussion Forum
- Topic: PARTS OF MODEL T FORDS USED FOR OTHER THINGS,
- Replies: 22
- Views: 7595
Re: PARTS OF MODEL T FORDS USED FOR OTHER THINGS,
still in use today....rl
- Mon May 18, 2020 8:58 pm
- Forum: General Discussion Forum
- Topic: We’re moving
- Replies: 12
- Views: 4654
Re: We’re moving
Amos McCoy, wuz from Wes Virginny .........how many here knew that?
- Mon May 11, 2020 5:44 pm
- Forum: General Discussion Forum
- Topic: Updated Transmission Oil Video (While Car is "Moving")
- Replies: 16
- Views: 5409
Re: Updated Transmission Oil Video (While Car is "Moving")
I don't know how many types of screens are out there....but my screen does not drop oil on or even close the transmission bands...oil from the screen drops to the rear over the clutch spring and clutch shaft...there are 4 holes ahead of my screen and magnet located on a flat plate these 4 holes dump...
- Mon May 11, 2020 1:33 pm
- Forum: General Discussion Forum
- Topic: Updated Transmission Oil Video (While Car is "Moving")
- Replies: 16
- Views: 5409
Re: Updated Transmission Oil Video (While Car is "Moving")
Madmax, Did you raise the front of the car to level ? If the car is level you may see a little more oil on the brake band...I am really glad you made these video's it proved to me that the screen is necessary and I am glad I enlarged the holes and may even make them larger....thanks rl
- Thu May 07, 2020 8:15 pm
- Forum: General Discussion Forum
- Topic: What did you do with your T Model in May ?
- Replies: 79
- Views: 19557
Re: What did you do with your T Model in May ?
I made a spare tire carrier...I could not get in or out of the door anyway...so took my spare out of the bed....
- Tue May 05, 2020 5:39 pm
- Forum: General Discussion Forum
- Topic: Transmission Oil Video
- Replies: 53
- Views: 12668
Re: Transmission Oil Video
The magnet is one of the super strong ones and is 3/8 thick so it can't get out of screen ... it is so strong I have to pry the top cover off...it may be too strong ...but did you notice I have it wired in place....If I decide I don't like the screen like this my next step is to cut a slot like the ...
- Tue May 05, 2020 4:42 pm
- Forum: General Discussion Forum
- Topic: Transmission Oil Video
- Replies: 53
- Views: 12668
Re: Transmission Oil Video
I pulled my screen out and made final modifications drill out all holes to larger size and cleaned my hy-po magnet....