Search found 338 matches

by modeltbarn
Tue Jan 16, 2024 6:43 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

Only 1 T bracket remaining.
by modeltbarn
Sun Jan 14, 2024 6:29 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

I have two brackets remaining for a T, and one for a TT.

After these are sold I’ll start a waitlist, but don’t expect to build more until at least fall.

I cans ship these anywhere in the US for $25, so $225 total.
by modeltbarn
Sat Dec 30, 2023 12:46 am
Forum: Classifieds - Parts
Topic: WTB Engine Stand Adapter
Replies: 10
Views: 646

Re: WTB Engine Stand Adapter

Engine stands come with the round tube / plate assembly and four arms to bolt up to pretty much any engine block. The adapter plate the vendors used to sell mounted to this, or fixed adapters; all you had to do was drill 4 holes for the arms to bolt to, or if your tube/plate assembly had fixed holes...
by modeltbarn
Fri Dec 29, 2023 7:27 pm
Forum: Classifieds - Parts
Topic: WTB Engine Stand Adapter
Replies: 10
Views: 646

Re: WTB Engine Stand Adapter

Hi Dan. I have one I made as a second that functionally is the same. It has been drilled for the bolts to mount at the water jacket and has the pins that align into the pan holes. I never drilled it for the engine stand because I never mounted it on my stand (I didn't need to hang two engines at the...
by modeltbarn
Wed Dec 13, 2023 9:26 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

Based on the response, I've ordered more hardware, so I've got more available.
by modeltbarn
Tue Dec 12, 2023 7:45 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket (Last One)

Hi John. Please call or email me at the address/number above, and it will be yours!
by modeltbarn
Tue Dec 12, 2023 3:36 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket (Last One)

One more available.
by modeltbarn
Sun Dec 10, 2023 1:57 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

5 are sold.

3 more are available.
by modeltbarn
Fri Dec 08, 2023 11:34 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

I just found out that USPS has discontinued the large flat rate game box. This means I have to charge actual shipping rates based on weight and dimensions. If you want a bracket please contact me so I can get shipping rates. I’ll price USPS and Fedex Ground and use whatever is less. I’m sorry about ...
by modeltbarn
Fri Dec 08, 2023 7:32 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Re: Warford Support Bracket

The ones I just made are sold. I have enough hardware for 4 more units.
by modeltbarn
Thu Dec 07, 2023 1:21 pm
Forum: Classifieds - Parts
Topic: Warford Support Bracket
Replies: 12
Views: 1185

Warford Support Bracket

I'm going to make a few more of these over the weekend; I'll use up the material and hardware I have on hand, then probably won't make more. These are bolt on with no drilling, and are designed for the KC Warford. They will work with an original aluminum Warford as well with a minor modification. Th...
by modeltbarn
Sat Nov 04, 2023 2:58 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

The pulley is spoken for
by modeltbarn
Fri Nov 03, 2023 5:53 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

The block off covers are spoken for.
by modeltbarn
Thu Nov 02, 2023 6:04 pm
Forum: Classifieds - Parts
Topic: Group of wrenches SOLD
Replies: 0
Views: 284

Group of wrenches SOLD

Assorted wrenches. These will fit in a medium flat rate box. $25 for the bunch.

All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Thu Nov 02, 2023 6:03 pm
Forum: Classifieds - Parts
Topic: Magneto Bulbs
Replies: 0
Views: 233

Magneto Bulbs

The Titan has 10 wrappers, one is empty, so 9 bulbs. The US Auto Lamp has 4 bulbs. The boxes are falling apart, but the tops are there. I have not unwrapped the bulbs to inspect, as it appears most have never been unwrapped and I don't want to tear the paper. $40 for all of them. These should fit in...
by modeltbarn
Thu Nov 02, 2023 1:35 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

The valve covers are sold.
by modeltbarn
Wed Nov 01, 2023 11:16 pm
Forum: Classifieds - Parts
Topic: _14- '15 ish misc. SOLD
Replies: 3
Views: 523

Re: _14- '15 ish misc.

The dash shield is spoken for.
by modeltbarn
Wed Nov 01, 2023 6:57 pm
Forum: Classifieds - Parts
Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
Replies: 3
Views: 308

Re: 13/32 tap, Master Keys, Ball Socket shims

The three new sets of keys are spoken for.
by modeltbarn
Wed Nov 01, 2023 6:28 pm
Forum: Classifieds - Parts
Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
Replies: 3
Views: 308

Re: 13/32 tap, Master Keys, Ball Socket shims

A second new set of keys are spoken for.
by modeltbarn
Wed Nov 01, 2023 6:27 pm
Forum: Classifieds - Parts
Topic: Metal Valve Stems
Replies: 5
Views: 422

Re: Metal Valve Stems

These are sold.
by modeltbarn
Wed Nov 01, 2023 5:31 pm
Forum: Classifieds - Parts
Topic: _14- '15 ish misc. SOLD
Replies: 3
Views: 523

Re: _14- '15 ish misc.

The latch set is spoken for.
by modeltbarn
Wed Nov 01, 2023 5:30 pm
Forum: Classifieds - Parts
Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
Replies: 3
Views: 308

Re: 13/32 tap, Master Keys, Ball Socket shims

The tap, shims, and one new key set are spoken for.
by modeltbarn
Wed Nov 01, 2023 5:29 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

The pedal extension and crank ratchet are spoken for.
by modeltbarn
Wed Nov 01, 2023 5:29 pm
Forum: Classifieds - Parts
Topic: Engine Support arms, 4 dip pan brackets
Replies: 1
Views: 195

Re: Engine Support arms, 4 dip pan brackets

Pan set #1 is spoken for
by modeltbarn
Wed Nov 01, 2023 3:06 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

Engine stand mount. Drill this to fit the brackets on your stand. I assembled this when I was working on two engines, but ended up not needing it. $25
by modeltbarn
Wed Nov 01, 2023 3:04 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

Late pully $5

Valve cover set $10

Starter block offs $15 per set.
by modeltbarn
Wed Nov 01, 2023 3:03 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Re: Pedal Extension, NOS Crank Ratchet, Misc

Front Engine mount parts $25 for all. One of the top bands seems to be spread out a bit, but I think it can be aligned ok.
by modeltbarn
Wed Nov 01, 2023 3:01 pm
Forum: Classifieds - Parts
Topic: Pedal Extension, NOS Crank Ratchet, Misc
Replies: 9
Views: 628

Pedal Extension, NOS Crank Ratchet, Misc

Reverse pedal extension, $20

NOS crank ratchet $15

All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Nov 01, 2023 2:54 pm
Forum: Classifieds - Parts
Topic: Engine Support arms, 4 dip pan brackets
Replies: 1
Views: 195

Engine Support arms, 4 dip pan brackets

APCO emergency arm $15 Unmarked emergency arm, tapered hole but will work with washer, $10 4 dip pan set #1, painted black, $20 4 dip pan set #2, not painted, $20 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON...
by modeltbarn
Wed Nov 01, 2023 2:50 pm
Forum: Classifieds - Parts
Topic: Truss Rod Bracket, Control Rod Swivel
Replies: 0
Views: 205

Truss Rod Bracket, Control Rod Swivel

Truss rod bracket, one side only, $45.

Control rod swivel, rusty but moves well, $5.

All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Nov 01, 2023 2:48 pm
Forum: Classifieds - Parts
Topic: Early door latch
Replies: 0
Views: 162

Early door latch

Latch set, I'm thinking passenger side rear. $45

All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Nov 01, 2023 2:46 pm
Forum: Classifieds - Parts
Topic: '15sh Headlamp Switch
Replies: 0
Views: 191

'15sh Headlamp Switch

Nice original switch. Looks like it was nickeled, then buffed off to brass. $50

No longer for sale, inconsistent ohm meter lest (sorry about that!
by modeltbarn
Wed Nov 01, 2023 2:43 pm
Forum: Classifieds - Parts
Topic: Side lamp / Tail lamp burners, AAA License Plate Topper
Replies: 2
Views: 296

Side lamp / Tail lamp burners, AAA License Plate Topper

two burners, one original and one repop. I think these are Jno Brown but don't have a lamp to test them on. $45 for both. AAA license plate topper, $20 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON'T RELY ON ...
by modeltbarn
Wed Nov 01, 2023 2:41 pm
Forum: Classifieds - Parts
Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
Replies: 3
Views: 308

13/32 tap, Master Keys, Ball Socket shims ALL SOLD

13/32-16 tap, new, $25. Master key sets. One is slightly pitted, three are NOS. These were in my family in the 1950's, supposed to be original; they're definitely not new repops. $20 for the pitted one, $25 for the new ones (each set). Tie rod ball shims; NOS originals, $10 for all 6 All items are p...
by modeltbarn
Wed Nov 01, 2023 2:36 pm
Forum: Classifieds - Parts
Topic: Pinion Gear
Replies: 0
Views: 206

Pinion Gear

11 tooth pinion $50

All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Nov 01, 2023 2:34 pm
Forum: Classifieds - Parts
Topic: Metal Valve Stems
Replies: 5
Views: 422

Metal Valve Stems

Everything for $100


All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.

EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Nov 01, 2023 2:31 pm
Forum: Classifieds - Parts
Topic: _14- '15 ish misc. SOLD
Replies: 3
Views: 523

_14- '15 ish misc. SOLD

Dash shield, no hardware, extra piece from "12 dash, $15. 13-14 coil box latches from RV Anderson, $20 Early top clips, good springs, $30 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
by modeltbarn
Wed Apr 19, 2023 3:59 pm
Forum: General Discussion Forum
Topic: Help identifying parts
Replies: 0
Views: 353

Help identifying parts

I found some lights that aren't T, and I'm hoping someone can identify them.

The bullet lights are approximately 8-5/8" diameter at the rim where the bezel would go.

The drum light body is approximately 8", and 8-1/2" at the outside of the front lip and band.

Many thanks!!!!
by modeltbarn
Thu Apr 06, 2023 1:50 pm
Forum: Classifieds - Parts
Topic: 1911-13 Dark Blue Paint
Replies: 2
Views: 899

Re: 1911-13 Dark Blue Paint

This is a picture of my 1911 painted with this paint; the color is great, particularly when shot over a black sealer or primer. I shot the car and wheels with one gallon.... only had to break into the extra quart when I re-shot the wheels. I'll lower this to $400. I'll be driving to Sacramento 4/12 ...
by modeltbarn
Wed Apr 05, 2023 10:40 am
Forum: General Discussion Forum
Topic: Tulare Swap Meet....Cancelled
Replies: 26
Views: 3307

Re: Tulare Swap Meet....Cancelled

I spoke with the fairgrounds office yesterday; they will be sending a letter to each one of the people who registered as a seller and, if they paid by check, returning the checks. Credit card payments will go back to the original card.
by modeltbarn
Mon Apr 03, 2023 8:51 pm
Forum: General Discussion Forum
Topic: Tulare Swap Meet....Cancelled
Replies: 26
Views: 3307

Re: Tulare Swap Meet....Cancelled

Bummer….

Will they be sending out refunds to us?

Hopefully we can get something else going soon in the area!

Thanks for everything Bill, we know you worked hard on this!
by modeltbarn
Wed Mar 08, 2023 11:48 pm
Forum: General Discussion Forum
Topic: Mounting Aermore whistle
Replies: 8
Views: 1000

Re: Mounting Aermore whistle

I've mounted them both ways, and was happiest with the tubes forward.
by modeltbarn
Tue Mar 07, 2023 9:53 pm
Forum: Classifieds - Parts
Topic: Neway Valve Facers and Seat Cutters (Pending Payment)
Replies: 3
Views: 604

Re: Neway Valve Facers and Seat Cutters

Ken; I received an email and responded to it before I saw this, so it may be sold. I'll let you know if it falls through.
by modeltbarn
Tue Mar 07, 2023 4:11 pm
Forum: Classifieds - Parts
Topic: King pin bushing remover, facer, reamer (Pending Payment)
Replies: 1
Views: 395

King pin bushing remover, facer, reamer (Pending Payment)

King pin bushing removal tool, bushing facer, and reamer. $175 plus shipping for all.
by modeltbarn
Tue Mar 07, 2023 4:08 pm
Forum: Classifieds - Parts
Topic: Drive shaft bushing facer (Pending Payment)
Replies: 1
Views: 411

Drive shaft bushing facer (Pending Payment)

Drive shaft bushing facing tool, $50 plus shipping.
by modeltbarn
Tue Mar 07, 2023 4:07 pm
Forum: Classifieds - Parts
Topic: Neway Valve Facers and Seat Cutters (Pending Payment)
Replies: 3
Views: 604

Neway Valve Facers and Seat Cutters (Pending Payment)

One set is for facing the valves, and has 30 and 45 degree cutters. The second set has seat cutters 31, 46, and 60 degrees. Pilots are 11/32 STD and 11/32-1; these are the pilots for .030 over valves. Reamers for .015 and .030 oversize valve stems. $400 plus shipping for everything. If this doesn't ...
by modeltbarn
Tue Mar 07, 2023 1:06 pm
Forum: Classifieds - Parts
Topic: Gas Lamp Ignitors (Pending Payment)
Replies: 1
Views: 424

Gas Lamp Ignitors (Pending Payment)

Nice pair of original gas headlamp igniters with flints. $100 plus shipping.
by modeltbarn
Tue Mar 07, 2023 1:04 pm
Forum: Classifieds - Parts
Topic: Brass Aermore Pedal (Pending Payment)
Replies: 0
Views: 378

Brass Aermore Pedal (Pending Payment)

Nice brass aermore pedal. This can be used with a toe instead of a heel, and can mount in the floorboard near the clutch pedal. $35 plus shipping.
by modeltbarn
Tue Mar 07, 2023 1:00 pm
Forum: Classifieds - Parts
Topic: Ford Faithful with 4 dip pan foot (Pending Payment)
Replies: 0
Views: 401

Ford Faithful with 4 dip pan foot (Pending Payment)

Dirty and surface rust, with foot for long nose pan. $40 plus shipping
by modeltbarn
Tue Mar 07, 2023 12:57 pm
Forum: Classifieds - Parts
Topic: 2-1/2:2 Speedo Swivel (Pending Payment)
Replies: 0
Views: 320

2-1/2:2 Speedo Swivel (Pending Payment)

Nice aftermarket swivel, turns freely. $175 plus shipping.
by modeltbarn
Tue Mar 07, 2023 12:55 pm
Forum: Classifieds - Parts
Topic: 1911-12 rear fenders, original
Replies: 1
Views: 352

Re: 1911-12 rear fenders, original

More pictures
by modeltbarn
Tue Mar 07, 2023 12:54 pm
Forum: Classifieds - Parts
Topic: 1911-12 rear fenders, original
Replies: 1
Views: 352

1911-12 rear fenders, original

Pair of rear fenders for a 1911-12. Overall these are pretty solid; minor metal work to restore but not bad. The original fenders have a slightly different curve than repops, so they fit much better. I can deliver these to Tulare, or they can be picked up, but I can't ship them. $550 / pair.
by modeltbarn
Tue Mar 07, 2023 12:47 pm
Forum: Classifieds - Parts
Topic: Starter Bendix, New (Pending Payment)
Replies: 0
Views: 300

Starter Bendix, New (Pending Payment)

Complete new starter bendix. $65 plus shipping.
IMG_4532.jpg
by modeltbarn
Tue Mar 07, 2023 12:43 pm
Forum: Classifieds - Parts
Topic: Black Centari Paint (Pending Payment)
Replies: 2
Views: 519

Black Centari Paint (Pending Payment)

1 gallon of Centari 99A pitch black with a gallon of mid temp reducer and catalyst. $300, cannot ship.


I can deliver this to Tulare, or it can be picked up.
by modeltbarn
Tue Mar 07, 2023 12:41 pm
Forum: Classifieds - Parts
Topic: 1911-13 Dark Blue Paint
Replies: 2
Views: 899

Re: 1911-14 Dark Blue Paint

Updated title
by modeltbarn
Sun Mar 05, 2023 11:26 pm
Forum: Classifieds - Parts
Topic: Tools (good stuff!)
Replies: 4
Views: 1074

Re: Tools (good stuff!)

Test plate and gaskets are pending payment.
by modeltbarn
Sun Mar 05, 2023 11:24 pm
Forum: Classifieds - Parts
Topic: front hub wanted
Replies: 3
Views: 519

Re: front hub wanted

Do you need an early hub or a later hub? Does it matter if it's machined for a speedometer ring or not? It will help folks identify what you're looking for.
by modeltbarn
Sun Mar 05, 2023 5:21 pm
Forum: Classifieds - Parts
Topic: Tools (good stuff!)
Replies: 4
Views: 1074

Re: Tools (good stuff!)

Knife edges and mandrels are spoken for.

The pressure test plate and gaskets remain available.
by modeltbarn
Sun Mar 05, 2023 4:09 pm
Forum: Classifieds - Parts
Topic: 1911-13 Dark Blue Paint
Replies: 2
Views: 899

1911-13 Dark Blue Paint

1 gallon plus about 1/2 quart of Nason Ful-Cryl II dark blue with catalyst, and almost full gallons of mid temp and high temp reducer. This is a great color for a dark blue T; I used this on my '11, and a number of people used the same color later. There is enough here to shoot a touring with fender...
by modeltbarn
Sun Mar 05, 2023 3:47 pm
Forum: Classifieds - Parts
Topic: Stevens Front Axle Tool; Complete set
Replies: 10
Views: 1035

Re: Stevens Front Axle Tool; Complete set

I'm not sure what bit you're referring to; there is a reamer and a tap. There is a steel washer that's in the box, not a brass one.
by modeltbarn
Sun Mar 05, 2023 3:27 pm
Forum: Classifieds - Parts
Topic: Stevens Front Axle Tool; Complete set
Replies: 10
Views: 1035

Stevens Front Axle Tool; Complete set

This is a complete set with enough top and bottom bushings for three axles. You can buy these new; you'll spend a bit over $700 for the pieces (I did!) Price is $575 plus shipping. This will fit in a medium USPS flat-rate box.
by modeltbarn
Sun Mar 05, 2023 1:41 pm
Forum: Classifieds - Parts
Topic: WTB K.R. WILSON / OTHER
Replies: 1
Views: 446

Re: WTB K.R. WILSON / OTHER

Mark;

I've got a table made out of 1-5/8" plate, machine ground on both sides, CNC drilled. I planned on listing it in a couple of months, but if you're interested let me know. I've also got a CNC made drilling template made of 1/2" aluminum I'll be listing.
by modeltbarn
Sat Mar 04, 2023 7:21 pm
Forum: Classifieds - Parts
Topic: Rear End Truss Rod
Replies: 2
Views: 578

Re: Rear End Truss Rod

Truss rod is pending payment
by modeltbarn
Sat Mar 04, 2023 7:21 pm
Forum: Classifieds - Parts
Topic: Firestone Spark Plugs SOLD
Replies: 3
Views: 654

Re: Firestone Spark Plugs

Plugs are pending payment
by modeltbarn
Sat Mar 04, 2023 7:20 pm
Forum: Classifieds - Parts
Topic: Tools (good stuff!)
Replies: 4
Views: 1074

Re: Tools (good stuff!)

Gap gauge and meter are pending payment
by modeltbarn
Sat Mar 04, 2023 5:16 pm
Forum: Classifieds - Parts
Topic: Rear End Truss Rod
Replies: 2
Views: 578

Re: Rear End Truss Rod

Contact info
by modeltbarn
Sat Mar 04, 2023 5:15 pm
Forum: Classifieds - Parts
Topic: Gas Headlight Forks
Replies: 1
Views: 405

Re: Gas Headlight Forks

Contact info
by modeltbarn
Sat Mar 04, 2023 5:15 pm
Forum: Classifieds - Parts
Topic: Firestone Spark Plugs SOLD
Replies: 3
Views: 654

Re: Firestone Spark Plugs

Contact info
by modeltbarn
Sat Mar 04, 2023 5:14 pm
Forum: Classifieds - Parts
Topic: Tools (good stuff!)
Replies: 4
Views: 1074

Re: Tools (good stuff!)

Contact info
by modeltbarn
Sat Mar 04, 2023 5:06 pm
Forum: Classifieds - Parts
Topic: Firestone Spark Plugs SOLD
Replies: 3
Views: 654

Firestone Spark Plugs SOLD

Original new plugs, $100 per box, or $50 for 4, or $60 for 5. Plus actual shipping, or I can bring hem to Tulare.
by modeltbarn
Sat Mar 04, 2023 5:03 pm
Forum: Classifieds - Parts
Topic: Gas Headlight Forks
Replies: 1
Views: 405

Gas Headlight Forks

Nice original pair, $110 plus shipping or I can bring to Tulare. Threads are good.
by modeltbarn
Sat Mar 04, 2023 4:59 pm
Forum: Classifieds - Parts
Topic: Tools (good stuff!)
Replies: 4
Views: 1074

Tools (good stuff!)

All of these are plus shipping, or can be delivered to Tulare. Magneto Gap Gauge, $200 IMG_5018.jpg Magneto test meter (it's not scratched at the top, it's reflections on the paint) $150 IMG_5012.jpg Engine block pressure test plate with 2 neoprene gaskets, never used $250 IMG_5013.jpg Transmission ...
by modeltbarn
Sat Mar 04, 2023 4:48 pm
Forum: Classifieds - Parts
Topic: Rear End Truss Rod
Replies: 2
Views: 578

Rear End Truss Rod

This is a complete, matched setup. The parts are powder-coated except for the nuts and bolts. Very nice, very hard to find. $300 plus actual shipping, or I can bring it to Tulare.
by modeltbarn
Sat Mar 04, 2023 4:46 pm
Forum: Classifieds - Parts
Topic: 1911 Brass Jno Brown Carbide Generator (Sold)
Replies: 5
Views: 881

1911 Brass Jno Brown Carbide Generator (Sold)

This is a new repop, never mounted, made by the same person in Australia that has built them for years for the vendors. It's never been mounted. It can use polishing, but I gave away my brass polish.... $1,500 plus actual shipping, local pickup in Southern CA is fine, or I can bring it to Tulare in ...
by modeltbarn
Sat Feb 18, 2023 1:29 pm
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Scott; I’ve got a new one, still in box, I’ll sell for $100 plus shipping. I’m out of town until the 26th, just send me a note if you’re interested.
by modeltbarn
Thu Feb 16, 2023 10:20 am
Forum: Classifieds - Parts
Topic: WTB Early Floormat
Replies: 33
Views: 3130

Re: WTB Early Floormat

Are you looking for a repop white floormat for an early car?
by modeltbarn
Sat Feb 11, 2023 12:47 pm
Forum: Classifieds - Vehicles
Topic: 1911 Touring
Replies: 11
Views: 5330

Re: 1911 Touring

This is sold. I'll leave it up to the buyer if he wants to share details; there were lots of variables that came into play on what to include, but it was in the $30's. I'll list some of the parts I still have, like a carbide generator, 1911 Jacobson Brandow coil box with 5 coils rebuilt by RV Anders...
by modeltbarn
Sun Feb 05, 2023 11:30 pm
Forum: Classifieds - Parts
Topic: Wanted: 1913/14 rear end halves
Replies: 6
Views: 989

Re: Wanted: 1913/14 rear end halves

I’ve got a couple of left sides but no rights. If that helps you let me know.
by modeltbarn
Tue Jan 31, 2023 2:15 pm
Forum: Classifieds - Vehicles
Topic: 1911 Touring
Replies: 11
Views: 5330

1911 Touring

I’ll be putting my ‘11 up for sale in a couple of months, probably late March or early April; I’m just posting now as a heads up. It’s a great car, more accurate and complete than most, and a strong runner. I need some time to get it out for more pictures, that’s the main reason for the delay. Feel ...
by modeltbarn
Wed Jan 18, 2023 12:34 pm
Forum: General Discussion Forum
Topic: Tulare 2023 IS A GO!!!!!!
Replies: 9
Views: 2719

Re: Tulare 2023 IS A GO!!!!!!

Do you have details on space size, schedule, and cost? Is there a flyer yet?
by modeltbarn
Fri Oct 07, 2022 12:56 am
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

Thank you Chris!

Nice job on the splice and weld, it looks very good. Nice bevel, and I like the anchor welds. Good lock with your project!
by modeltbarn
Thu Oct 06, 2022 8:06 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

Kevin;

The 15101 arrived, it’s good to go. What number race did you use? I’m thinking 15244 but am not sure.
by modeltbarn
Tue Oct 04, 2022 6:06 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

The ring and pinion were set proper initially. The U joint was pinned, and the bushing had been faced as if I was using a stock bearing setup. The pinion nut was torqued. At this point there's no way to determine what started the problem. I'm wondering if the passenger side of the differential case ...
by modeltbarn
Mon Oct 03, 2022 11:02 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

Thanks guys! I’ve got a 15101 on order. I appreciate the alternative numbers! I was looking at the Timken catalog and it looked like the 102 was similar and I wasn’t sure what the difference was. The drive shaft is bad because the keyway is torn out. The pinion split at the key, opened up, and the k...
by modeltbarn
Mon Oct 03, 2022 7:38 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

Steve:

I find a 15101; are you sure yours is 10151?
by modeltbarn
Mon Oct 03, 2022 7:25 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

I’ve got more axle gears, once these are cleaned I’ll inspect them. The front bushing is good, bronze, properly fitted and I did have the U joint pinned, but the Fun Project kit takes that issue away.

Thanks for the number Steve!
by modeltbarn
Mon Oct 03, 2022 6:22 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

The broken ring gear is not this problem, I'd really like to keep the thread on the problem I am dealing with. Soo...... I am trying to find: 1.Tthe part number for the tapered bearing used in the Fun Projects kit. If you know it please let me know. 2. A short driveshaft for a Warford transmission. ...
by modeltbarn
Mon Oct 03, 2022 5:31 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Re: Rear End Problem... With Pics!

Yup, it split open, but I've got a pinion and a ring gear if needed.
by modeltbarn
Mon Oct 03, 2022 5:07 pm
Forum: General Discussion Forum
Topic: Rear End Problem... With Pics!
Replies: 25
Views: 2783

Rear End Problem... With Pics!

While on the San Francisco tour our car made a pop and stopped moving. The engine ran fine, but it wasn't driving the wheels. I knew it had to be in the Warford or rear end but I didn't have time to open it until this morning. The carrier has seen better days.... Two questions!! 1. Does anyone know ...
by modeltbarn
Thu Feb 10, 2022 2:29 pm
Forum: Classifieds - Parts
Topic: FS 1911 Fore Door Set
Replies: 3
Views: 1520

Re: FS 1911 Fore Door Set

I still have these. How about $700? This is a really nice, solid set.
by modeltbarn
Thu Jan 20, 2022 10:39 pm
Forum: Classifieds - Parts
Topic: FS 1911 Fore Door Set
Replies: 3
Views: 1520

Re: FS 1911 Fore Door Set

Still here…
by modeltbarn
Thu Jan 20, 2022 10:38 pm
Forum: Classifieds - Parts
Topic: FS 1913/14 Rear Axle Housings
Replies: 1
Views: 951

Re: FS 1913/14 Rear Axle Housings

Still here….
by modeltbarn
Wed Jan 19, 2022 10:33 pm
Forum: General Discussion Forum
Topic: RV Anderson: streaming memorial service
Replies: 4
Views: 1600

Re: RV Anderson: streaming memorial service

Thank you Maureen.
by modeltbarn
Mon Jan 17, 2022 11:53 pm
Forum: Classifieds - Parts
Topic: ALL SPOKEN FOR!!!! Free- Sioux Decals
Replies: 11
Views: 2197

Re: Free- Sioux Decals

I’d like one! I’ll get an envelope on the way in the morning
by modeltbarn
Mon Jan 17, 2022 10:26 pm
Forum: General Discussion Forum
Topic: 1915: What's correct here?
Replies: 12
Views: 2142

Re: 1915: What's correct here?

My 15’s had that hole, and I don’t recall anything going there. When my dad needed a starter in his Runabout we placed a button switch to control a solenoid there. Not original, but it was very low profile.