Search found 338 matches
- Tue Jan 16, 2024 6:43 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
Only 1 T bracket remaining.
- Sun Jan 14, 2024 6:29 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
I have two brackets remaining for a T, and one for a TT.
After these are sold I’ll start a waitlist, but don’t expect to build more until at least fall.
I cans ship these anywhere in the US for $25, so $225 total.
After these are sold I’ll start a waitlist, but don’t expect to build more until at least fall.
I cans ship these anywhere in the US for $25, so $225 total.
- Sat Dec 30, 2023 12:46 am
- Forum: Classifieds - Parts
- Topic: WTB Engine Stand Adapter
- Replies: 10
- Views: 668
Re: WTB Engine Stand Adapter
Engine stands come with the round tube / plate assembly and four arms to bolt up to pretty much any engine block. The adapter plate the vendors used to sell mounted to this, or fixed adapters; all you had to do was drill 4 holes for the arms to bolt to, or if your tube/plate assembly had fixed holes...
- Fri Dec 29, 2023 7:27 pm
- Forum: Classifieds - Parts
- Topic: WTB Engine Stand Adapter
- Replies: 10
- Views: 668
Re: WTB Engine Stand Adapter
Hi Dan. I have one I made as a second that functionally is the same. It has been drilled for the bolts to mount at the water jacket and has the pins that align into the pan holes. I never drilled it for the engine stand because I never mounted it on my stand (I didn't need to hang two engines at the...
- Wed Dec 13, 2023 9:26 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
Based on the response, I've ordered more hardware, so I've got more available.
- Tue Dec 12, 2023 7:45 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket (Last One)
Hi John. Please call or email me at the address/number above, and it will be yours!
- Tue Dec 12, 2023 3:36 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket (Last One)
One more available.
- Sun Dec 10, 2023 1:57 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
5 are sold.
3 more are available.
3 more are available.
- Fri Dec 08, 2023 11:34 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
I just found out that USPS has discontinued the large flat rate game box. This means I have to charge actual shipping rates based on weight and dimensions. If you want a bracket please contact me so I can get shipping rates. I’ll price USPS and Fedex Ground and use whatever is less. I’m sorry about ...
- Fri Dec 08, 2023 7:32 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Re: Warford Support Bracket
The ones I just made are sold. I have enough hardware for 4 more units.
- Thu Dec 07, 2023 1:21 pm
- Forum: Classifieds - Parts
- Topic: Warford Support Bracket
- Replies: 12
- Views: 1391
Warford Support Bracket
I'm going to make a few more of these over the weekend; I'll use up the material and hardware I have on hand, then probably won't make more. These are bolt on with no drilling, and are designed for the KC Warford. They will work with an original aluminum Warford as well with a minor modification. Th...
- Sat Nov 04, 2023 2:58 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
The pulley is spoken for
- Fri Nov 03, 2023 5:53 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
The block off covers are spoken for.
- Thu Nov 02, 2023 6:04 pm
- Forum: Classifieds - Parts
- Topic: Group of wrenches SOLD
- Replies: 0
- Views: 294
Group of wrenches SOLD
Assorted wrenches. These will fit in a medium flat rate box. $25 for the bunch.
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Thu Nov 02, 2023 6:03 pm
- Forum: Classifieds - Parts
- Topic: Magneto Bulbs
- Replies: 0
- Views: 244
Magneto Bulbs
The Titan has 10 wrappers, one is empty, so 9 bulbs. The US Auto Lamp has 4 bulbs. The boxes are falling apart, but the tops are there. I have not unwrapped the bulbs to inspect, as it appears most have never been unwrapped and I don't want to tear the paper. $40 for all of them. These should fit in...
- Thu Nov 02, 2023 1:35 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
The valve covers are sold.
- Thu Nov 02, 2023 1:34 pm
- Forum: Classifieds - Parts
- Topic: Side lamp / Tail lamp burners, AAA License Plate Topper
- Replies: 2
- Views: 313
Re: Side lamp / Tail lamp burners, AAA License Plate Topper
The burners are sold
- Wed Nov 01, 2023 11:16 pm
- Forum: Classifieds - Parts
- Topic: _14- '15 ish misc. SOLD
- Replies: 3
- Views: 541
Re: _14- '15 ish misc.
The dash shield is spoken for.
- Wed Nov 01, 2023 6:57 pm
- Forum: Classifieds - Parts
- Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
- Replies: 3
- Views: 317
Re: 13/32 tap, Master Keys, Ball Socket shims
The three new sets of keys are spoken for.
- Wed Nov 01, 2023 6:28 pm
- Forum: Classifieds - Parts
- Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
- Replies: 3
- Views: 317
Re: 13/32 tap, Master Keys, Ball Socket shims
A second new set of keys are spoken for.
- Wed Nov 01, 2023 6:27 pm
- Forum: Classifieds - Parts
- Topic: Metal Valve Stems
- Replies: 5
- Views: 453
Re: Metal Valve Stems
These are sold.
- Wed Nov 01, 2023 5:31 pm
- Forum: Classifieds - Parts
- Topic: _14- '15 ish misc. SOLD
- Replies: 3
- Views: 541
Re: _14- '15 ish misc.
The latch set is spoken for.
- Wed Nov 01, 2023 5:30 pm
- Forum: Classifieds - Parts
- Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
- Replies: 3
- Views: 317
Re: 13/32 tap, Master Keys, Ball Socket shims
The tap, shims, and one new key set are spoken for.
- Wed Nov 01, 2023 5:30 pm
- Forum: Classifieds - Parts
- Topic: Side lamp / Tail lamp burners, AAA License Plate Topper
- Replies: 2
- Views: 313
Re: Side lamp / Tail lamp burners, AAA License Plate Topper
License plate topper is spoken for.
- Wed Nov 01, 2023 5:29 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
The pedal extension and crank ratchet are spoken for.
- Wed Nov 01, 2023 5:29 pm
- Forum: Classifieds - Parts
- Topic: Engine Support arms, 4 dip pan brackets
- Replies: 1
- Views: 203
Re: Engine Support arms, 4 dip pan brackets
Pan set #1 is spoken for
- Wed Nov 01, 2023 3:06 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
Engine stand mount. Drill this to fit the brackets on your stand. I assembled this when I was working on two engines, but ended up not needing it. $25
- Wed Nov 01, 2023 3:04 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
Late pully $5
Valve cover set $10
Starter block offs $15 per set.
Valve cover set $10
Starter block offs $15 per set.
- Wed Nov 01, 2023 3:03 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Re: Pedal Extension, NOS Crank Ratchet, Misc
Front Engine mount parts $25 for all. One of the top bands seems to be spread out a bit, but I think it can be aligned ok.
- Wed Nov 01, 2023 3:01 pm
- Forum: Classifieds - Parts
- Topic: Pedal Extension, NOS Crank Ratchet, Misc
- Replies: 9
- Views: 664
Pedal Extension, NOS Crank Ratchet, Misc
Reverse pedal extension, $20
NOS crank ratchet $15
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
NOS crank ratchet $15
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Nov 01, 2023 2:54 pm
- Forum: Classifieds - Parts
- Topic: Engine Support arms, 4 dip pan brackets
- Replies: 1
- Views: 203
Engine Support arms, 4 dip pan brackets
APCO emergency arm $15 Unmarked emergency arm, tapered hole but will work with washer, $10 4 dip pan set #1, painted black, $20 4 dip pan set #2, not painted, $20 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON...
- Wed Nov 01, 2023 2:50 pm
- Forum: Classifieds - Parts
- Topic: Truss Rod Bracket, Control Rod Swivel
- Replies: 0
- Views: 219
Truss Rod Bracket, Control Rod Swivel
Truss rod bracket, one side only, $45.
Control rod swivel, rusty but moves well, $5.
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
Control rod swivel, rusty but moves well, $5.
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Nov 01, 2023 2:48 pm
- Forum: Classifieds - Parts
- Topic: Early door latch
- Replies: 0
- Views: 175
Early door latch
Latch set, I'm thinking passenger side rear. $45
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Nov 01, 2023 2:46 pm
- Forum: Classifieds - Parts
- Topic: '15sh Headlamp Switch
- Replies: 0
- Views: 206
'15sh Headlamp Switch
Nice original switch. Looks like it was nickeled, then buffed off to brass. $50
No longer for sale, inconsistent ohm meter lest (sorry about that!
No longer for sale, inconsistent ohm meter lest (sorry about that!
- Wed Nov 01, 2023 2:43 pm
- Forum: Classifieds - Parts
- Topic: Side lamp / Tail lamp burners, AAA License Plate Topper
- Replies: 2
- Views: 313
Side lamp / Tail lamp burners, AAA License Plate Topper
two burners, one original and one repop. I think these are Jno Brown but don't have a lamp to test them on. $45 for both. AAA license plate topper, $20 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON'T RELY ON ...
- Wed Nov 01, 2023 2:41 pm
- Forum: Classifieds - Parts
- Topic: 13/32 tap, Master Keys, Ball Socket shims ALL SOLD
- Replies: 3
- Views: 317
13/32 tap, Master Keys, Ball Socket shims ALL SOLD
13/32-16 tap, new, $25. Master key sets. One is slightly pitted, three are NOS. These were in my family in the 1950's, supposed to be original; they're definitely not new repops. $20 for the pitted one, $25 for the new ones (each set). Tie rod ball shims; NOS originals, $10 for all 6 All items are p...
- Wed Nov 01, 2023 2:36 pm
- Forum: Classifieds - Parts
- Topic: Pinion Gear
- Replies: 0
- Views: 216
Pinion Gear
11 tooth pinion $50
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Nov 01, 2023 2:34 pm
- Forum: Classifieds - Parts
- Topic: Metal Valve Stems
- Replies: 5
- Views: 453
Metal Valve Stems
Everything for $100
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges.
EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Nov 01, 2023 2:31 pm
- Forum: Classifieds - Parts
- Topic: _14- '15 ish misc. SOLD
- Replies: 3
- Views: 541
_14- '15 ish misc. SOLD
Dash shield, no hardware, extra piece from "12 dash, $15. 13-14 coil box latches from RV Anderson, $20 Early top clips, good springs, $30 All items are plus actual shipping. I'll have a few listings and am happy to combine to save shipping charges. EMAIL IS BEST!! PLEASE DON'T RELY ON REPLYING HERE!
- Wed Apr 19, 2023 3:59 pm
- Forum: General Discussion Forum
- Topic: Help identifying parts
- Replies: 0
- Views: 370
Help identifying parts
I found some lights that aren't T, and I'm hoping someone can identify them.
The bullet lights are approximately 8-5/8" diameter at the rim where the bezel would go.
The drum light body is approximately 8", and 8-1/2" at the outside of the front lip and band.
Many thanks!!!!
The bullet lights are approximately 8-5/8" diameter at the rim where the bezel would go.
The drum light body is approximately 8", and 8-1/2" at the outside of the front lip and band.
Many thanks!!!!
- Thu Apr 06, 2023 1:50 pm
- Forum: Classifieds - Parts
- Topic: 1911-13 Dark Blue Paint
- Replies: 2
- Views: 926
Re: 1911-13 Dark Blue Paint
This is a picture of my 1911 painted with this paint; the color is great, particularly when shot over a black sealer or primer. I shot the car and wheels with one gallon.... only had to break into the extra quart when I re-shot the wheels. I'll lower this to $400. I'll be driving to Sacramento 4/12 ...
- Wed Apr 05, 2023 10:40 am
- Forum: General Discussion Forum
- Topic: Tulare Swap Meet....Cancelled
- Replies: 26
- Views: 3371
Re: Tulare Swap Meet....Cancelled
I spoke with the fairgrounds office yesterday; they will be sending a letter to each one of the people who registered as a seller and, if they paid by check, returning the checks. Credit card payments will go back to the original card.
- Mon Apr 03, 2023 8:51 pm
- Forum: General Discussion Forum
- Topic: Tulare Swap Meet....Cancelled
- Replies: 26
- Views: 3371
Re: Tulare Swap Meet....Cancelled
Bummer….
Will they be sending out refunds to us?
Hopefully we can get something else going soon in the area!
Thanks for everything Bill, we know you worked hard on this!
Will they be sending out refunds to us?
Hopefully we can get something else going soon in the area!
Thanks for everything Bill, we know you worked hard on this!
- Thu Mar 16, 2023 5:47 pm
- Forum: Classifieds - Parts
- Topic: 1911 Brass Jno Brown Carbide Generator (Sold)
- Replies: 5
- Views: 917
Re: 1911 Brass Jno Brown Carbide Generator (Sold)
This is sold
- Wed Mar 08, 2023 11:48 pm
- Forum: General Discussion Forum
- Topic: Mounting Aermore whistle
- Replies: 8
- Views: 1041
Re: Mounting Aermore whistle
I've mounted them both ways, and was happiest with the tubes forward.
- Tue Mar 07, 2023 9:53 pm
- Forum: Classifieds - Parts
- Topic: Neway Valve Facers and Seat Cutters (Pending Payment)
- Replies: 3
- Views: 623
Re: Neway Valve Facers and Seat Cutters
Ken; I received an email and responded to it before I saw this, so it may be sold. I'll let you know if it falls through.
- Tue Mar 07, 2023 4:11 pm
- Forum: Classifieds - Parts
- Topic: King pin bushing remover, facer, reamer (Pending Payment)
- Replies: 1
- Views: 408
King pin bushing remover, facer, reamer (Pending Payment)
King pin bushing removal tool, bushing facer, and reamer. $175 plus shipping for all.
- Tue Mar 07, 2023 4:08 pm
- Forum: Classifieds - Parts
- Topic: Drive shaft bushing facer (Pending Payment)
- Replies: 1
- Views: 425
Drive shaft bushing facer (Pending Payment)
Drive shaft bushing facing tool, $50 plus shipping.
- Tue Mar 07, 2023 4:07 pm
- Forum: Classifieds - Parts
- Topic: Neway Valve Facers and Seat Cutters (Pending Payment)
- Replies: 3
- Views: 623
Neway Valve Facers and Seat Cutters (Pending Payment)
One set is for facing the valves, and has 30 and 45 degree cutters. The second set has seat cutters 31, 46, and 60 degrees. Pilots are 11/32 STD and 11/32-1; these are the pilots for .030 over valves. Reamers for .015 and .030 oversize valve stems. $400 plus shipping for everything. If this doesn't ...
- Tue Mar 07, 2023 1:06 pm
- Forum: Classifieds - Parts
- Topic: Gas Lamp Ignitors (Pending Payment)
- Replies: 1
- Views: 436
Gas Lamp Ignitors (Pending Payment)
Nice pair of original gas headlamp igniters with flints. $100 plus shipping.
- Tue Mar 07, 2023 1:04 pm
- Forum: Classifieds - Parts
- Topic: Brass Aermore Pedal (Pending Payment)
- Replies: 0
- Views: 414
Brass Aermore Pedal (Pending Payment)
Nice brass aermore pedal. This can be used with a toe instead of a heel, and can mount in the floorboard near the clutch pedal. $35 plus shipping.
- Tue Mar 07, 2023 1:00 pm
- Forum: Classifieds - Parts
- Topic: Ford Faithful with 4 dip pan foot (Pending Payment)
- Replies: 0
- Views: 442
Ford Faithful with 4 dip pan foot (Pending Payment)
Dirty and surface rust, with foot for long nose pan. $40 plus shipping
- Tue Mar 07, 2023 12:57 pm
- Forum: Classifieds - Parts
- Topic: 2-1/2:2 Speedo Swivel (Pending Payment)
- Replies: 0
- Views: 351
2-1/2:2 Speedo Swivel (Pending Payment)
Nice aftermarket swivel, turns freely. $175 plus shipping.
- Tue Mar 07, 2023 12:55 pm
- Forum: Classifieds - Parts
- Topic: 1911-12 rear fenders, original
- Replies: 1
- Views: 371
Re: 1911-12 rear fenders, original
More pictures
- Tue Mar 07, 2023 12:54 pm
- Forum: Classifieds - Parts
- Topic: 1911-12 rear fenders, original
- Replies: 1
- Views: 371
1911-12 rear fenders, original
Pair of rear fenders for a 1911-12. Overall these are pretty solid; minor metal work to restore but not bad. The original fenders have a slightly different curve than repops, so they fit much better. I can deliver these to Tulare, or they can be picked up, but I can't ship them. $550 / pair.
- Tue Mar 07, 2023 12:47 pm
- Forum: Classifieds - Parts
- Topic: Starter Bendix, New (Pending Payment)
- Replies: 0
- Views: 326
Starter Bendix, New (Pending Payment)
Complete new starter bendix. $65 plus shipping.
- Tue Mar 07, 2023 12:43 pm
- Forum: Classifieds - Parts
- Topic: Black Centari Paint (Pending Payment)
- Replies: 2
- Views: 535
Black Centari Paint (Pending Payment)
1 gallon of Centari 99A pitch black with a gallon of mid temp reducer and catalyst. $300, cannot ship.
I can deliver this to Tulare, or it can be picked up.
I can deliver this to Tulare, or it can be picked up.
- Tue Mar 07, 2023 12:41 pm
- Forum: Classifieds - Parts
- Topic: 1911-13 Dark Blue Paint
- Replies: 2
- Views: 926
Re: 1911-14 Dark Blue Paint
Updated title
- Sun Mar 05, 2023 11:26 pm
- Forum: Classifieds - Parts
- Topic: Tools (good stuff!)
- Replies: 4
- Views: 1102
Re: Tools (good stuff!)
Test plate and gaskets are pending payment.
- Sun Mar 05, 2023 11:24 pm
- Forum: Classifieds - Parts
- Topic: front hub wanted
- Replies: 3
- Views: 545
Re: front hub wanted
Do you need an early hub or a later hub? Does it matter if it's machined for a speedometer ring or not? It will help folks identify what you're looking for.
- Sun Mar 05, 2023 5:21 pm
- Forum: Classifieds - Parts
- Topic: Tools (good stuff!)
- Replies: 4
- Views: 1102
Re: Tools (good stuff!)
Knife edges and mandrels are spoken for.
The pressure test plate and gaskets remain available.
The pressure test plate and gaskets remain available.
- Sun Mar 05, 2023 4:09 pm
- Forum: Classifieds - Parts
- Topic: 1911-13 Dark Blue Paint
- Replies: 2
- Views: 926
1911-13 Dark Blue Paint
1 gallon plus about 1/2 quart of Nason Ful-Cryl II dark blue with catalyst, and almost full gallons of mid temp and high temp reducer. This is a great color for a dark blue T; I used this on my '11, and a number of people used the same color later. There is enough here to shoot a touring with fender...
- Sun Mar 05, 2023 3:47 pm
- Forum: Classifieds - Parts
- Topic: Stevens Front Axle Tool; Complete set
- Replies: 10
- Views: 1071
Re: Stevens Front Axle Tool; Complete set
I'm not sure what bit you're referring to; there is a reamer and a tap. There is a steel washer that's in the box, not a brass one.
- Sun Mar 05, 2023 3:27 pm
- Forum: Classifieds - Parts
- Topic: Stevens Front Axle Tool; Complete set
- Replies: 10
- Views: 1071
Stevens Front Axle Tool; Complete set
This is a complete set with enough top and bottom bushings for three axles. You can buy these new; you'll spend a bit over $700 for the pieces (I did!) Price is $575 plus shipping. This will fit in a medium USPS flat-rate box.
- Sun Mar 05, 2023 1:42 pm
- Forum: Classifieds - Parts
- Topic: 1911 Brass Jno Brown Carbide Generator (Sold)
- Replies: 5
- Views: 917
Re: 1911 Brass Jno Brown Carbide Generator
Pending payment
- Sun Mar 05, 2023 1:41 pm
- Forum: Classifieds - Parts
- Topic: WTB K.R. WILSON / OTHER
- Replies: 1
- Views: 462
Re: WTB K.R. WILSON / OTHER
Mark;
I've got a table made out of 1-5/8" plate, machine ground on both sides, CNC drilled. I planned on listing it in a couple of months, but if you're interested let me know. I've also got a CNC made drilling template made of 1/2" aluminum I'll be listing.
I've got a table made out of 1-5/8" plate, machine ground on both sides, CNC drilled. I planned on listing it in a couple of months, but if you're interested let me know. I've also got a CNC made drilling template made of 1/2" aluminum I'll be listing.
- Sat Mar 04, 2023 7:21 pm
- Forum: Classifieds - Parts
- Topic: Rear End Truss Rod
- Replies: 2
- Views: 602
Re: Rear End Truss Rod
Truss rod is pending payment
- Sat Mar 04, 2023 7:21 pm
- Forum: Classifieds - Parts
- Topic: Firestone Spark Plugs SOLD
- Replies: 3
- Views: 683
Re: Firestone Spark Plugs
Plugs are pending payment
- Sat Mar 04, 2023 7:20 pm
- Forum: Classifieds - Parts
- Topic: Tools (good stuff!)
- Replies: 4
- Views: 1102
Re: Tools (good stuff!)
Gap gauge and meter are pending payment
- Sat Mar 04, 2023 5:17 pm
- Forum: Classifieds - Parts
- Topic: 1911 Brass Jno Brown Carbide Generator (Sold)
- Replies: 5
- Views: 917
Re: 1911 Brass Jno Brown Carbide Generator
Contact info
- Sat Mar 04, 2023 5:16 pm
- Forum: Classifieds - Parts
- Topic: Rear End Truss Rod
- Replies: 2
- Views: 602
Re: Rear End Truss Rod
Contact info
- Sat Mar 04, 2023 5:15 pm
- Forum: Classifieds - Parts
- Topic: Gas Headlight Forks
- Replies: 1
- Views: 425
Re: Gas Headlight Forks
Contact info
- Sat Mar 04, 2023 5:15 pm
- Forum: Classifieds - Parts
- Topic: Firestone Spark Plugs SOLD
- Replies: 3
- Views: 683
Re: Firestone Spark Plugs
Contact info
- Sat Mar 04, 2023 5:14 pm
- Forum: Classifieds - Parts
- Topic: Tools (good stuff!)
- Replies: 4
- Views: 1102
Re: Tools (good stuff!)
Contact info
- Sat Mar 04, 2023 5:06 pm
- Forum: Classifieds - Parts
- Topic: Firestone Spark Plugs SOLD
- Replies: 3
- Views: 683
Firestone Spark Plugs SOLD
Original new plugs, $100 per box, or $50 for 4, or $60 for 5. Plus actual shipping, or I can bring hem to Tulare.
- Sat Mar 04, 2023 5:03 pm
- Forum: Classifieds - Parts
- Topic: Gas Headlight Forks
- Replies: 1
- Views: 425
Gas Headlight Forks
Nice original pair, $110 plus shipping or I can bring to Tulare. Threads are good.
- Sat Mar 04, 2023 4:59 pm
- Forum: Classifieds - Parts
- Topic: Tools (good stuff!)
- Replies: 4
- Views: 1102
Tools (good stuff!)
All of these are plus shipping, or can be delivered to Tulare. Magneto Gap Gauge, $200 IMG_5018.jpg Magneto test meter (it's not scratched at the top, it's reflections on the paint) $150 IMG_5012.jpg Engine block pressure test plate with 2 neoprene gaskets, never used $250 IMG_5013.jpg Transmission ...
- Sat Mar 04, 2023 4:48 pm
- Forum: Classifieds - Parts
- Topic: Rear End Truss Rod
- Replies: 2
- Views: 602
Rear End Truss Rod
This is a complete, matched setup. The parts are powder-coated except for the nuts and bolts. Very nice, very hard to find. $300 plus actual shipping, or I can bring it to Tulare.
- Sat Mar 04, 2023 4:46 pm
- Forum: Classifieds - Parts
- Topic: 1911 Brass Jno Brown Carbide Generator (Sold)
- Replies: 5
- Views: 917
1911 Brass Jno Brown Carbide Generator (Sold)
This is a new repop, never mounted, made by the same person in Australia that has built them for years for the vendors. It's never been mounted. It can use polishing, but I gave away my brass polish.... $1,500 plus actual shipping, local pickup in Southern CA is fine, or I can bring it to Tulare in ...
- Sat Feb 18, 2023 1:29 pm
- Forum: Classifieds - Parts
- Topic: WTB Early Floormat
- Replies: 33
- Views: 3262
Re: WTB Early Floormat
Scott; I’ve got a new one, still in box, I’ll sell for $100 plus shipping. I’m out of town until the 26th, just send me a note if you’re interested.
- Thu Feb 16, 2023 10:20 am
- Forum: Classifieds - Parts
- Topic: WTB Early Floormat
- Replies: 33
- Views: 3262
Re: WTB Early Floormat
Are you looking for a repop white floormat for an early car?
- Sat Feb 11, 2023 12:47 pm
- Forum: Classifieds - Vehicles
- Topic: 1911 Touring
- Replies: 11
- Views: 5411
Re: 1911 Touring
This is sold. I'll leave it up to the buyer if he wants to share details; there were lots of variables that came into play on what to include, but it was in the $30's. I'll list some of the parts I still have, like a carbide generator, 1911 Jacobson Brandow coil box with 5 coils rebuilt by RV Anders...
- Sun Feb 05, 2023 11:30 pm
- Forum: Classifieds - Parts
- Topic: Wanted: 1913/14 rear end halves
- Replies: 6
- Views: 1031
Re: Wanted: 1913/14 rear end halves
I’ve got a couple of left sides but no rights. If that helps you let me know.
- Tue Jan 31, 2023 2:15 pm
- Forum: Classifieds - Vehicles
- Topic: 1911 Touring
- Replies: 11
- Views: 5411
1911 Touring
I’ll be putting my ‘11 up for sale in a couple of months, probably late March or early April; I’m just posting now as a heads up. It’s a great car, more accurate and complete than most, and a strong runner. I need some time to get it out for more pictures, that’s the main reason for the delay. Feel ...
- Wed Jan 18, 2023 12:34 pm
- Forum: General Discussion Forum
- Topic: Tulare 2023 IS A GO!!!!!!
- Replies: 9
- Views: 2758
Re: Tulare 2023 IS A GO!!!!!!
Do you have details on space size, schedule, and cost? Is there a flyer yet?
- Fri Oct 07, 2022 12:56 am
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
Thank you Chris!
Nice job on the splice and weld, it looks very good. Nice bevel, and I like the anchor welds. Good lock with your project!
Nice job on the splice and weld, it looks very good. Nice bevel, and I like the anchor welds. Good lock with your project!
- Thu Oct 06, 2022 8:06 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
Kevin;
The 15101 arrived, it’s good to go. What number race did you use? I’m thinking 15244 but am not sure.
The 15101 arrived, it’s good to go. What number race did you use? I’m thinking 15244 but am not sure.
- Tue Oct 04, 2022 6:06 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
The ring and pinion were set proper initially. The U joint was pinned, and the bushing had been faced as if I was using a stock bearing setup. The pinion nut was torqued. At this point there's no way to determine what started the problem. I'm wondering if the passenger side of the differential case ...
- Mon Oct 03, 2022 11:02 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
Thanks guys! I’ve got a 15101 on order. I appreciate the alternative numbers! I was looking at the Timken catalog and it looked like the 102 was similar and I wasn’t sure what the difference was. The drive shaft is bad because the keyway is torn out. The pinion split at the key, opened up, and the k...
- Mon Oct 03, 2022 7:38 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
Steve:
I find a 15101; are you sure yours is 10151?
I find a 15101; are you sure yours is 10151?
- Mon Oct 03, 2022 7:25 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
I’ve got more axle gears, once these are cleaned I’ll inspect them. The front bushing is good, bronze, properly fitted and I did have the U joint pinned, but the Fun Project kit takes that issue away.
Thanks for the number Steve!
Thanks for the number Steve!
- Mon Oct 03, 2022 6:22 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
The broken ring gear is not this problem, I'd really like to keep the thread on the problem I am dealing with. Soo...... I am trying to find: 1.Tthe part number for the tapered bearing used in the Fun Projects kit. If you know it please let me know. 2. A short driveshaft for a Warford transmission. ...
- Mon Oct 03, 2022 5:31 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Re: Rear End Problem... With Pics!
Yup, it split open, but I've got a pinion and a ring gear if needed.
- Mon Oct 03, 2022 5:07 pm
- Forum: General Discussion Forum
- Topic: Rear End Problem... With Pics!
- Replies: 25
- Views: 2854
Rear End Problem... With Pics!
While on the San Francisco tour our car made a pop and stopped moving. The engine ran fine, but it wasn't driving the wheels. I knew it had to be in the Warford or rear end but I didn't have time to open it until this morning. The carrier has seen better days.... Two questions!! 1. Does anyone know ...
- Thu Feb 10, 2022 2:29 pm
- Forum: Classifieds - Parts
- Topic: FS 1911 Fore Door Set
- Replies: 3
- Views: 1568
Re: FS 1911 Fore Door Set
I still have these. How about $700? This is a really nice, solid set.
- Thu Jan 20, 2022 10:39 pm
- Forum: Classifieds - Parts
- Topic: FS 1911 Fore Door Set
- Replies: 3
- Views: 1568
Re: FS 1911 Fore Door Set
Still here…
- Thu Jan 20, 2022 10:38 pm
- Forum: Classifieds - Parts
- Topic: FS 1913/14 Rear Axle Housings
- Replies: 1
- Views: 982
Re: FS 1913/14 Rear Axle Housings
Still here….
- Wed Jan 19, 2022 10:33 pm
- Forum: General Discussion Forum
- Topic: RV Anderson: streaming memorial service
- Replies: 4
- Views: 1638
Re: RV Anderson: streaming memorial service
Thank you Maureen.
- Mon Jan 17, 2022 11:53 pm
- Forum: Classifieds - Parts
- Topic: ALL SPOKEN FOR!!!! Free- Sioux Decals
- Replies: 11
- Views: 2235
Re: Free- Sioux Decals
I’d like one! I’ll get an envelope on the way in the morning
- Mon Jan 17, 2022 10:26 pm
- Forum: General Discussion Forum
- Topic: 1915: What's correct here?
- Replies: 12
- Views: 2176
Re: 1915: What's correct here?
My 15’s had that hole, and I don’t recall anything going there. When my dad needed a starter in his Runabout we placed a button switch to control a solenoid there. Not original, but it was very low profile.