Search found 385 matches
- Sun Mar 24, 2024 5:15 pm
- Forum: General Discussion Forum
- Topic: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
- Replies: 18
- Views: 488
Re: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
Your original flat glass lasted for 112 years. I would go with flat glass, it has proven durability.
- Fri Mar 15, 2024 8:40 pm
- Forum: Classifieds - Parts
- Topic: WTB Winshield Support Rods for a '12
- Replies: 2
- Views: 219
Re: WTB Winshield Support Rods for a '12
You can get them from McMaster Carr.
- Fri Mar 08, 2024 7:26 pm
- Forum: General Discussion Forum
- Topic: Renumbering a Block Using Metal Stamps
- Replies: 15
- Views: 1323
Re: Renumbering a Block Using Metal Stamps
I use a 3 pound hammer and a decent swing.
- Wed Mar 06, 2024 6:20 pm
- Forum: General Discussion Forum
- Topic: OT: What type wood between frame rails and truck box?
- Replies: 14
- Views: 719
Re: OT: What type wood between frame rails and truck box?
Ash is a great hardwood but remember powder post Beatles love it too. Treat it for insects.
- Tue Mar 05, 2024 10:01 am
- Forum: General Discussion Forum
- Topic: 26-27 fordor steering column questions
- Replies: 24
- Views: 905
Re: 26-27 fordor steering column questions
I cut 4 inches from the shaft and the column. It made a huge difference. I cut and machined the shaft. The column can be shortened without removing the spark and throttle rods if done carefully. I am not a fan of cutting and welding the shaft.
- Tue Feb 27, 2024 5:48 pm
- Forum: Classifieds - Parts
- Topic: FS: Used Main bearing Cap Set (Sold)
- Replies: 3
- Views: 491
Re: FS: Used Main bearing Cap Set (reduced price)
What is the reduced price????
- Fri Feb 16, 2024 7:22 pm
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1296
Re: Installing metal panels best practices
Some woods have better nail holding characteristics than others. Maple is not the best, especially hard maple. Nails will split the maple and it is very hard to nail without bending the nails. Pre drill it to prevent splitting. Screws will hold better than short nails
- Fri Feb 09, 2024 11:00 pm
- Forum: General Discussion Forum
- Topic: Water Jacket Crack Advice
- Replies: 20
- Views: 1196
Re: Water Jacket Crack Advice
That crack is a typical "hard water crack". Very common in engines that were found in the northern states. It was caused by ice or hard water.
- Thu Feb 08, 2024 10:56 am
- Forum: General Discussion Forum
- Topic: Waukesha Ricardo Head differences
- Replies: 4
- Views: 449
Waukesha Ricardo Head differences
Recently I was able to compare heads made by Waukeshe engine company. If you look closely you can identify several differences in these two heads. I do not know which one is the earlier of the two.
- Sat Feb 03, 2024 9:37 pm
- Forum: Classifieds - Parts
- Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
- Replies: 7
- Views: 1135
Re: 26-27 PICKUP SPARE TIRE MOUNT--This one is sold.
This one has been sold to JON.
I can make more if there a demand. JP
I can make more if there a demand. JP
- Wed Jan 24, 2024 10:19 pm
- Forum: Classifieds - Parts
- Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
- Replies: 7
- Views: 1135
Re: 26-27 PICKUP SPARE TIRE MOUNT
Jim.. I am not aware of similar spare carriers
Ford did not supply any side mount carrier for their trucks until late 1926
Ford did not supply any side mount carrier for their trucks until late 1926
- Mon Jan 22, 2024 8:41 pm
- Forum: Classifieds - Parts
- Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
- Replies: 7
- Views: 1135
Re: 26-27 PICKUP SPARE TIRE MOUNT
The distance between the top pivot arm and the running board is the critical distance . This support is 28 1/8 long.
- Fri Jan 19, 2024 7:28 pm
- Forum: Classifieds - Parts
- Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
- Replies: 7
- Views: 1135
Re: 26-27 PICKUP SPARE TIRE MOUNT
post to the top
- Fri Jan 12, 2024 10:47 am
- Forum: Classifieds - Parts
- Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
- Replies: 7
- Views: 1135
26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
Owners of the Model T pickup always had a problem where to put a spare tire. Finally Ford provided a mount in late 1926 that placed the spare on the drivers side of the vehicle. Yes it blocks the door, but so does the hand brake lever. The very narrow space between the steering wheel and the car bo...
- Sat Jan 06, 2024 10:23 pm
- Forum: General Discussion Forum
- Topic: Top bows...
- Replies: 9
- Views: 627
Re: Top bows...
Not the best pictures but I think the red set is roadster. Other set may be incomplete.
- Thu Dec 28, 2023 9:44 pm
- Forum: General Discussion Forum
- Topic: Parts suppliers
- Replies: 18
- Views: 1190
Re: Parts suppliers
For the most parts there is one manufacturer who sells to all of the parts vendors. Who has the best they all do. Who has the worst, they all do.
- Thu Dec 28, 2023 11:09 am
- Forum: General Discussion Forum
- Topic: Steve Jelf is heading to California
- Replies: 22
- Views: 2367
Re: Steve Jelf is heading to California
Steve. Glad to hear you have planned some future activities. That indicates you are looking ahead and getting better. You must have the tour America health plan as you keep moving from state. Good on you.
- Sat Dec 23, 2023 4:47 pm
- Forum: Classifieds - Parts
- Topic: WTB Side Curtain Rods for 26 Touring
- Replies: 3
- Views: 205
Re: WTB Side Curtain Rods for 26 Touring
Side curtains with 4 rods only fit 26,27 tourings.
- Tue Dec 05, 2023 10:18 pm
- Forum: Classifieds - Parts
- Topic: For Sale VISOR FRAME and Brackets for 23-25 Closed Cars
- Replies: 4
- Views: 760
Re: For Sale VISOR FRAME and Brackets for 23-25 Closed Cars
A well made hard to find part.
- Wed Oct 11, 2023 8:24 pm
- Forum: General Discussion Forum
- Topic: 1911 brass radiator drain plug size
- Replies: 9
- Views: 396
Re: 1911 brass radiator drain plug size
Use a wood dowel, sharpen the end slightly. Then screw it in place. Won't damage the threads.
- Mon Oct 09, 2023 8:34 pm
- Forum: Classifieds - Parts
- Topic: For Sale 23-25 touring body
- Replies: 9
- Views: 875
Re: For Sale 23-25 touring body
Where. Is the body located?
- Sun Oct 01, 2023 10:14 pm
- Forum: General Discussion Forum
- Topic: MTFCA Board of Directors Election Candidates
- Replies: 13
- Views: 981
Re: MTFCA Board of Directors Election Candidates
What was the logic behind "must vote for three". It makes no sense, it not logical. If I must vote for those I don't know or feel not the better candidate I chose not to cast my vote.
- Sun Sep 17, 2023 2:28 pm
- Forum: Classifieds - Parts
- Topic: FS non starter motor/trans
- Replies: 6
- Views: 755
Re: for sale
Naming what is for sale in the title would help your sale.
- Sun Aug 20, 2023 7:34 pm
- Forum: Classifieds - Vehicles
- Topic: 1927 Tudor
- Replies: 6
- Views: 1457
Re: 1927 Tudor
Do you have a price on your cars or should we guess
- Sat Aug 19, 2023 9:30 pm
- Forum: General Discussion Forum
- Topic: -Stud Moving WIRE WHEEL HUB ---->Fixed!
- Replies: 11
- Views: 737
Re: -Stud Moving WIRE WHEEL HUB
There are no splines on thre model t replacement wheel studs.
- Mon Aug 14, 2023 12:24 pm
- Forum: General Discussion Forum
- Topic: Website back up to speed
- Replies: 16
- Views: 945
Re: Website back up to speed
Slow has returned again.
- Thu Aug 10, 2023 7:26 pm
- Forum: Classifieds - Vehicles
- Topic: *SOLD* 1925 Tudor
- Replies: 2
- Views: 1299
Re: 1925 Tudor for sale
Posting the location might help the sale.
- Thu Aug 03, 2023 9:54 pm
- Forum: Classifieds - Parts
- Topic: FS 1927 ROADSTER, ROADSTER PU AND COUPE FENDER SET
- Replies: 3
- Views: 644
Re: FS 1927 ROADSTER, ROADSTER PU AND COUPE FENDER SET
Will you ship to ohio?
- Sun Jul 09, 2023 9:51 pm
- Forum: General Discussion Forum
- Topic: Stripped exhaust stud
- Replies: 5
- Views: 510
Re: Stripped exhaust stud
Remove and replace. It is a simple job.
- Fri Jul 07, 2023 9:51 pm
- Forum: General Discussion Forum
- Topic: Windshield hardware
- Replies: 9
- Views: 658
Re: Windshield hardware
That drilled area at the bottom of the frame is the starting point for inserting the windshield rubber.
- Tue Jun 20, 2023 10:00 pm
- Forum: Classifieds - Parts
- Topic: 1925 Fordor doors and body
- Replies: 2
- Views: 426
Re: 1925 Fordor doors and body
The photos didn't load.
- Tue Jun 20, 2023 6:40 pm
- Forum: General Discussion Forum
- Topic: Seat project challenge has been met
- Replies: 4
- Views: 613
Re: Seat project challenge has been met
Edited post
- Tue Jun 20, 2023 5:44 pm
- Forum: General Discussion Forum
- Topic: Seat project challenge has been met
- Replies: 4
- Views: 613
Seat project challenge has been met
I started with a barn found seat frame, possibly 1910 Era, maybe from a Model N maybe not. Using a partial original seat back upholstery and a lot of liberty I have finally finished a seat upholstery project. I had not done this type of work for many years so my memory was challenged quite seriously...
- Thu May 18, 2023 6:03 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE*** Servwell coil tester
- Replies: 6
- Views: 1705
Re: FOR SALE*** Servwell coil tester
The coil tester was sold two years ago. That ad was posted in September of 2021
- Fri May 05, 2023 1:33 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
Re: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
You can mount wire or split rims with this carrier. Split rims require the Y bracket
- Fri May 05, 2023 1:27 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
Re: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
The shim plate is there. Just hard to see in the pictures.
- Fri May 05, 2023 1:07 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 40
- Views: 3729
Re: What are you bringing to Luray?? Post it here to let us know.
wtb...looking for a pair of splash aprons for use on my 1914 bitsa T. Should be solid, but need not be pristine. Patina is good..
- Thu May 04, 2023 10:33 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
Re: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
No. The distance from the running board to the top mount post is different.
- Thu May 04, 2023 10:24 pm
- Forum: General Discussion Forum
- Topic: Mag post threads stripped out
- Replies: 19
- Views: 1318
Re: Mag post threads stripped out
Drill and tap. 12 x 24 as said before.
- Mon May 01, 2023 10:50 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
- Sat Apr 08, 2023 7:48 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: STEVENS FRONT AXLE TOOL FRAME
- Replies: 18
- Views: 3424
Re: FOR SALE: STEVENS FRONT AXLE TOOL FRAME
May have to give this project some serious thought.
- Fri Apr 07, 2023 5:54 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: STEVENS FRONT AXLE TOOL FRAME
- Replies: 18
- Views: 3424
Re: FOR SALE: STEVENS FRONT AXLE TOOL FRAME
Presently the Steven's front axle tool is out of stock. If I find there is sufficient interest I can do another run of them. JP 4/7/23
- Thu Mar 16, 2023 9:43 pm
- Forum: General Discussion Forum
- Topic: Mystery Tool identification
- Replies: 8
- Views: 1045
Re: Mystery Tool identification
Maybe tenon cutter?
- Thu Mar 02, 2023 9:49 pm
- Forum: General Discussion Forum
- Topic: Parts Manufacturer Mark - W in a circle
- Replies: 10
- Views: 1180
Re: Parts Manufacturer Mark - W in a circle
Webster Co.
- Sun Feb 26, 2023 7:28 pm
- Forum: General Discussion Forum
- Topic: Model T engine or transmission locked up.
- Replies: 70
- Views: 5134
Re: Model T engine or transmission locked up.
FWIW. The worm gear in the rear axle of the TT makes it nearly impossible to push the vehicle or to rock it back and forth.
- Thu Jan 26, 2023 10:11 am
- Forum: General Discussion Forum
- Topic: Gray/Davis starter
- Replies: 4
- Views: 726
Re: Gray/Davis starter
The type of chain you want for the starter is called "silent chain". Available from power transmission companies. It will work on gears of different thread pitches and different power loads. More power to be transferred just add more chain width. It has been used in automobiles to earth moving mach...
- Mon Jan 23, 2023 2:04 pm
- Forum: General Discussion Forum
- Topic: Did any one get a similar email?
- Replies: 17
- Views: 1628
Re: Did any one get a similar email?
I think we all got this email.
- Thu Jan 12, 2023 8:27 pm
- Forum: General Discussion Forum
- Topic: Reproduced Model T project
- Replies: 15
- Views: 1735
Re: Reproduced Model T project
There were 6 of the 1914 model t touring cars reproduced for the 100th anniversary of Ford Motor Company.
- Tue Jan 10, 2023 9:57 pm
- Forum: General Discussion Forum
- Topic: Radiator question . .
- Replies: 9
- Views: 1094
Re: Radiator question . .
Yes it will fit fine.
- Thu Dec 29, 2022 10:47 am
- Forum: Classifieds - Parts
- Topic: Reproduction 1914 Model T body
- Replies: 8
- Views: 2670
Re: Reproduction 1914 Model T body
Was this one of the T100 bodies built for the Ford centenial ?
- Tue Dec 27, 2022 9:20 pm
- Forum: General Discussion Forum
- Topic: New glass for 1913?
- Replies: 3
- Views: 584
Re: New glass for 1913?
Take your windshield frame to a glass shop that has been in business for a long and have them install glass--safety plate, no trademarks showing. I have done it many times, no patterns needed.
- Fri Dec 23, 2022 1:37 pm
- Forum: General Discussion Forum
- Topic: Babbitt boring bar RPM?
- Replies: 21
- Views: 2113
Re: Babbitt boring bar RPM?
KRW did supply an optional hand crank attachment for hand boring and reaming newly poured bearings. If you had the boring frame and reamers but did not spend the beg bucks to buy the combination machine you could do the bearings by hand crank power. The boring bar has a threaded holed in the end fo...
- Tue Nov 29, 2022 9:31 pm
- Forum: General Discussion Forum
- Topic: OLD PHOTO - Model T Era Auto Parts Store Room
- Replies: 15
- Views: 1744
Re: OLD PHOTO - Model T Era Auto Parts Store Room
It was most likely delivered by railway express!
- Sat Nov 26, 2022 11:31 am
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
Re: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
This carrier can be used with wire or wood spoked wheels with the "Y" bracket.
- Tue Nov 15, 2022 8:27 pm
- Forum: General Discussion Forum
- Topic: Block Question
- Replies: 5
- Views: 827
Re: Block Question
Do you know the history of the block?
Was it involved in a fire? That will cause a twist. Just a possible answer to your problem.
Was it involved in a fire? That will cause a twist. Just a possible answer to your problem.
- Tue Nov 08, 2022 8:27 pm
- Forum: Classifieds - Vehicles
- Topic: SOLD... Model TT C Cab Truck
- Replies: 7
- Views: 7687
Re: For Sale: Model TT C Cab Truck
C cab has been sold.
- Fri Nov 04, 2022 8:51 pm
- Forum: General Discussion Forum
- Topic: Can you identify this early auto?
- Replies: 0
- Views: 636
Can you identify this early auto?
Can you name this car ? Thanks MTFCA.
- Fri Sep 30, 2022 8:51 pm
- Forum: General Discussion Forum
- Topic: Enclosed Trailer floor covering?
- Replies: 16
- Views: 1919
Re: Enclosed Trailer floor covering?
Porch paint, cardboard and a couple of drip pans. That will help keep the floor clean. Easily replaced as needed.
- Mon Sep 05, 2022 6:38 pm
- Forum: Classifieds - Parts
- Topic: WTB Round Gas Tank Support
- Replies: 3
- Views: 664
WTB Round Gas Tank Support
I need one round gas tank support. The one that mounts with one bolt to the frame, part #2915. I'll take a pair if you don't want to part a set. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.
- Tue Aug 30, 2022 2:53 pm
- Forum: General Discussion Forum
- Topic: 5 to 1 steering conversion for my 1922.
- Replies: 34
- Views: 2800
Re: 5 to 1 steering conversion for my 1922.
Changing the steering gear ratio from 4:1 to 5:1 will not cure the death wobble. The ratio is not the cause of the wobble. The wobble is caused by wear in other parts of the front axle. Fix all of the worn parts and it will cure the wobble. Changing the ratio will make steering easier. The gear hous...
- Mon Aug 29, 2022 5:56 pm
- Forum: General Discussion Forum
- Topic: Where Dome Shaped Lugs Nuts Original for a 1927 Coupe?
- Replies: 9
- Views: 1124
Re: Where Dome Shaped Lugs Nuts Original for a 1927 Coupe?
The dome lug nuts belong on the Model A, not a T. T lug nuts are flat topped.
- Wed Aug 03, 2022 11:58 am
- Forum: General Discussion Forum
- Topic: Brass windshield support rods... Is anyone making them?
- Replies: 9
- Views: 1321
Re: Brass windshield support rods... Is anyone making them?
Mcmaster-carr is you friend. They have brass tube which can easily be made into windshield support rods. It is a ridged tubing that requires heat to bend.
- Wed Jul 20, 2022 5:47 pm
- Forum: General Discussion Forum
- Topic: Marquette Clincher tire tool...Usage help needed.
- Replies: 1
- Views: 655
Marquette Clincher tire tool...Usage help needed.
Can anyone explain the correlated usage of the Marquette tire tool? I understand the bead breaker application, but the other parts of this tool are unknown. Any help would be greatly appreciated. Thank you.
- Mon Jun 13, 2022 12:19 pm
- Forum: General Discussion Forum
- Topic: Door latch identification help needed p
- Replies: 5
- Views: 1054
Re: Door latch identification help needed p
Thank you Perry. No need to remove upholstery, your pictures are an exact match. I wonder if it was used in vehicles other than the coupe.
- Sun Jun 12, 2022 11:21 pm
- Forum: General Discussion Forum
- Topic: Door latch identification help needed p
- Replies: 5
- Views: 1054
Door latch identification help needed p
I don't know for which T this latch was made . I'm thinking early 20's coupe or maybe center door. Or something other model. Anyone know for sure?
- Sun Jun 05, 2022 7:18 pm
- Forum: General Discussion Forum
- Topic: Safety wire?
- Replies: 7
- Views: 1130
Re: Safety wire?
Yes. If wired they won't come out for sure.
- Tue May 31, 2022 1:45 pm
- Forum: Classifieds - Parts
- Topic: Fenders got too many. Richmond bound.
- Replies: 1
- Views: 895
Fenders got too many. Richmond bound.
[*][bFenders for Richmond homecoming. Some nos, some very good, some mildly used and some that are battle worn. If interested let me know as all won't fit in my truck.
jputnam (@) wcoil.com][/b]
jputnam (@) wcoil.com][/b]
- Wed May 18, 2022 9:12 pm
- Forum: Classifieds - Parts
- Topic: For Sale - Stromberg Acorn Nuts
- Replies: 12
- Views: 2079
Re: For Sale - Stromberg Acorn Nuts
Scott: I am in need of one acorn stromberg nut also. Advise when available.
Jack Putnam jputnam@wcoil.com
Thank you.
Jack Putnam jputnam@wcoil.com
Thank you.
- Wed May 04, 2022 3:49 pm
- Forum: Classifieds - Parts
- Topic: TA 14 parts for sale
- Replies: 2
- Views: 847
Re: TA 14 parts for sale
Dan: Just what is a TA 14? What is its purpose. I fully admit I don't know and have no clue.
- Mon Apr 18, 2022 6:27 pm
- Forum: General Discussion Forum
- Topic: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
- Replies: 9
- Views: 1936
Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
Fantastic work, I'm glad to see that you can make such precision parts.
- Sat Apr 16, 2022 10:30 pm
- Forum: General Discussion Forum
- Topic: Hudson Hogshead for Fords
- Replies: 12
- Views: 1881
Re: Hudson Hogshead for Fords
I had one, put it on a TT for looks as I never had to change the kevlar bands. Sealing was not a problem as I used the felt from the band changing kit that I coated with silicone. Never leaked. Before modern sealants I'm sure it was a problem.
- Tue Apr 12, 2022 6:08 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
FOR SALE: Spare tire carrier for 26-27 pick up T Truck
This is a new reproduction spare tire carrier for the 26-27 T pickup truck. Made using the original Ford blue prints. Available now. $600 plus the ride to you. PayPal between friends, check, or pictures of dead presidents if you pick up. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.
- Tue Mar 29, 2022 6:23 pm
- Forum: Classifieds - Parts
- Topic: WTB: Tires 30x3-1/2
- Replies: 10
- Views: 1674
Re: WTB: Tires 30x3-1/2
email sent
- Thu Mar 17, 2022 10:00 am
- Forum: General Discussion Forum
- Topic: Finding the correct 1927 Touring rear fenders
- Replies: 7
- Views: 1345
Re: Finding the correct 1927 Touring rear fenders
I have several sets of original 26-27 touring rear fenders available. They range from repairable to NOS condition. None are junk. If interested contact jputnam(at)wcoil.com
- Fri Feb 25, 2022 12:36 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE*** Early Dash to frame firewall bracket--09-10
- Replies: 0
- Views: 615
FOR SALE*** Early Dash to frame firewall bracket--09-10
I only have one, left side, dash to frame bracket. Believed to be 09-10 years. Casting is not bent, just a crude early casting. Chamfered bolt holes for the slotted oval head bolts. $20 plus the ride to you. PayPal between friends, or check. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.
- Thu Feb 24, 2022 7:44 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE**EARLY SPRING PERCH..
- Replies: 0
- Views: 641
FOR SALE**EARLY SPRING PERCH..
One only spring perch, left side. Good threads, wishbone hole has some wear. $40 + $10 USPS shipping. PayPal between friends, check. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.
- Thu Feb 24, 2022 7:38 pm
- Forum: Classifieds - Parts
- Topic: SOLD***Switch and Dash 19-25
- Replies: 0
- Views: 565
SOLD***Switch and Dash 19-25
Dash plate and complete switch. ammeter does not have needle. $30 + shipping. PayPal between friends, check. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.
- Tue Feb 22, 2022 1:17 pm
- Forum: Classifieds - Parts
- Topic: SOLD--Early front spring perches 1916-1919
- Replies: 2
- Views: 834
Re: For sale--Early front spring perchs 1916-1919
Sold to Ken.
- Mon Feb 21, 2022 9:59 am
- Forum: General Discussion Forum
- Topic: Sunday armchair traveler
- Replies: 36
- Views: 3718
Re: Sunday armchair traveler
What in the SAM hill is HCCT, I thought it was Hand Cranked Coil Tester. Keep the photos coming Tom.
- Sat Feb 19, 2022 10:12 pm
- Forum: Classifieds - Parts
- Topic: SOLD--Early front spring perches 1916-1919
- Replies: 2
- Views: 834
SOLD--Early front spring perches 1916-1919
!cid_storage_emulated_0__EmailTempImage_1_RotateImage_20220219_134618_jpg_1645325409861 (480x640).jpg A pair of early perches for wishbone mounting over the axle. These are drilled for top oilers. Paypal or check $100 and I will pay USPS priority mail. Jack Putnam, 1215 Twp. Rd 28, Bluffton, Ohio 4...
- Thu Feb 17, 2022 9:23 pm
- Forum: Classifieds - Parts
- Topic: Front spring perches WTB
- Replies: 11
- Views: 1803
Re: Front spring perches WTB
Looks like an extra space before the @ in the email.
Address is correct.
thank you.
Address is correct.
thank you.
- Thu Feb 17, 2022 5:41 pm
- Forum: Classifieds - Parts
- Topic: Front spring perches WTB
- Replies: 11
- Views: 1803
Re: Front spring perches WTB
I have this pair if you still need. These are not drilled for top oilers. Paypal or check $100 and I will pay USPS priority mail. Jack Putnam, 1215 Twp. Rd 28, Bluffton, Ohio 45817. Reply to
jputnam (at)wcoil.com
jputnam (at)wcoil.com
- Wed Feb 16, 2022 10:04 pm
- Forum: General Discussion Forum
- Topic: Bud Delong
- Replies: 36
- Views: 5953
Re: Bud Delong
I first met Bud at the OCF. We both had 1914 tourings, mine was equipped with what Bud called the "self commencer". ( An early starter). A true gentleman. He is well respected.
- Tue Feb 08, 2022 5:47 pm
- Forum: Classifieds - Parts
- Topic: For Sale--S4BF Zenith Carb.-ZOOM ZOOM
- Replies: 2
- Views: 1383
Re: For Sale--S4BF Zenith Carb.-ZOOM ZOOM
If you are interested contact me. Zoom.
- Tue Feb 08, 2022 5:40 pm
- Forum: Classifieds - Parts
- Topic: Sold--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
- Replies: 5
- Views: 2369
Re: FOR SALE--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
Axle has been sold to Steve.
- Thu Jan 27, 2022 9:53 pm
- Forum: Classifieds - Parts
- Topic: Sold--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
- Replies: 5
- Views: 2369
Re: FOR SALE--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
Speedster builder alert, still available.
- Sun Jan 23, 2022 5:38 pm
- Forum: Classifieds - Parts
- Topic: non starter cars acc. starter
- Replies: 4
- Views: 1369
Re: non starter cars acc. starter
What is in the box on top of the starter housing? Do you know that it works?
- Sat Jan 22, 2022 5:05 pm
- Forum: Classifieds - Parts
- Topic: For Sale--26-27 Touring Rear Fenders
- Replies: 0
- Views: 690
For Sale--26-27 Touring Rear Fenders
I have this pair 26/27 touring fenders. One is NOS , the other has been used but very good. No rust out. One small weld on the used one. Asking $800 for the pair. Pick up here. Jputnam(at)wcoil.com 419-3zero6=39sixsix
- Sat Jan 22, 2022 4:59 pm
- Forum: Classifieds - Parts
- Topic: WTB: Rear fenders for 1927 Touring
- Replies: 3
- Views: 1179
Re: WTB: Rear fenders for 1927 Touring
I have this pair 26/27 touring fenders. One is NOS , the other has been used but very good. No rust out. One small weld on the used one. Asking $800 for the pair. Pick up here. Jputnam(at)wcoil.com 419-3zero6=39sixsix
- Fri Jan 21, 2022 4:26 pm
- Forum: Classifieds - Parts
- Topic: See it, want it, let’s talk !
- Replies: 10
- Views: 2988
Re: See it, want it, let’s talk !
Tim: Is the brass light a side light or tail light? JP
- Fri Jan 07, 2022 11:30 am
- Forum: Classifieds - Parts
- Topic: FOR SALE**Stromberg Hot Spot Manifold $375
- Replies: 15
- Views: 2507
Re: FOR SALE**Stromberg Hot Spot Manifold $375
North Dakota bound when payment received. Thanks Rick.
- Fri Jan 07, 2022 10:41 am
- Forum: Classifieds - Parts
- Topic: FOR SALE**Stromberg Hot Spot Manifold $375
- Replies: 15
- Views: 2507
Re: FOR SALE**Stromberg Hot Spot Manifold $375
That display is fantastic. MY hot spot is still available.
- Thu Jan 06, 2022 3:10 pm
- Forum: Classifieds - Parts
- Topic: Sold--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
- Replies: 5
- Views: 2369
Re: FOR SALE--DROPPED FRONT AXLE FOR MODEL T SPEEDSTER***$485
You need this for a speedster build.
- Thu Jan 06, 2022 2:56 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE**Stromberg Hot Spot Manifold $375
- Replies: 15
- Views: 2507
Re: FOR SALE**Stromberg Hot Spot Manifold $375
Still available. Early Stromberg part.
- Thu Jan 06, 2022 10:10 am
- Forum: General Discussion Forum
- Topic: Pan Straightening Jig
- Replies: 22
- Views: 2955
Re: Pan Straightening Jig
It is extremely difficult to straighten a twisted pan. It would be easier to just replace the pan if it is badly twisted. I speak from experience. The pan jig will tell you where the pan is supposed to fit, but getting it there is a whole new ball game.
- Fri Dec 31, 2021 5:02 pm
- Forum: General Discussion Forum
- Topic: A DB axle Mr. Stevens, Mr. Wilson, and farmer Brown
- Replies: 15
- Views: 2145
Re: A DB axle Mr. Stevens, Mr. Wilson, and farmer Brown
Well done, illustrated how to do it correctly.
- Thu Dec 30, 2021 6:46 pm
- Forum: Classifieds - Parts
- Topic: RUNNINGBOARD TOOL BOX
- Replies: 7
- Views: 1757
Re: RUNNINGBOARD TOOL BOX
Do you have the key?
- Sun Dec 26, 2021 1:30 pm
- Forum: General Discussion Forum
- Topic: Wanting to resume T activity
- Replies: 26
- Views: 3135
Re: Wanting to resume T activity
What ever you do T wise, be sure to work smart. Follow the weight limits you may be given.Use an engine hoist to lift those things that are above you given weight limit. If you don't have a hoist get one.
- Mon Dec 20, 2021 7:51 pm
- Forum: Classifieds - Parts
- Topic: SOLD - FS Drum taillights – Late T and early A
- Replies: 3
- Views: 974
Re: FS Drum taillights – Late T and early A
Wow, that took a long time to sell! 13 minutes! Got to be a record.
- Fri Dec 17, 2021 5:43 pm
- Forum: Classifieds - Parts
- Topic: For Sale--S4BF Zenith Carb.-ZOOM ZOOM
- Replies: 2
- Views: 1383
Re: For Sale--S4BF Zenith Carb.-ZOOM ZOOM
If you feel the need for speed, you need this carb.