Search found 45 matches

by Daniel828
Sat Aug 22, 2020 2:57 pm
Forum: General Discussion Forum
Topic: Need flat screws
Replies: 9
Views: 2273

Re: Need flat screws

I just bought a bunch of vintage looking square head bolts and slotted screws from black smith bolt and rivet supply. very nice hardware and very reasonable prices
by Daniel828
Thu Aug 20, 2020 9:50 pm
Forum: General Discussion Forum
Topic: You Will Never Know What You May Find in a Model T Engine
Replies: 12
Views: 2959

Re: You Will Never Know What You May Find in a Model T Engine

that engine looks really clean to have the engineers move in so quickly? no?
by Daniel828
Tue Aug 11, 2020 7:55 pm
Forum: General Discussion Forum
Topic: How many cars in a T built from parts?
Replies: 11
Views: 3956

Re: How many cars in a T built from parts?

This car was made from parts from my friends collection, strangers from swap meets and Hershey and oof course new parts from Langs, Snyders and chaffins Oh and from members on here, like hank lee and the body was home made. I stole the idea from the movie "river runs through it" The engine must've b...
by Daniel828
Sun Aug 09, 2020 4:48 pm
Forum: General Discussion Forum
Topic: aJ baimes "arsenal of democracy"
Replies: 14
Views: 4513

Re: aJ baimes "arsenal of democracy"

Your right Harold, about the compression ratio. I have a Z head so I have 6 to 1 on my brain ;)
by Daniel828
Sat Aug 08, 2020 10:19 pm
Forum: General Discussion Forum
Topic: aJ baimes "arsenal of democracy"
Replies: 14
Views: 4513

Re: aJ baimes "arsenal of democracy"

Thanks for the replies everyone. What I think I failed to explain was, the T engine is what, 6:1 compression ratio ? So in regards to the way the engine sees 83 octane gasoline as premium 92 gas. I’m just spit balling here. I don’t mean for this to turn into what is the proper oil for model t engine...
by Daniel828
Thu Aug 06, 2020 7:38 pm
Forum: General Discussion Forum
Topic: aJ baimes "arsenal of democracy"
Replies: 14
Views: 4513

aJ baimes "arsenal of democracy"

I just finished listening to this book on audible it was very good but it focuses on Edsel a little more than Henry. Anyway, the book mentioned that two types of fuel were supplied in the willow run factory, 78 octane for the trucks that were used on the factory grounds and 100 octane for the bomber...
by Daniel828
Wed Jul 22, 2020 6:59 pm
Forum: General Discussion Forum
Topic: What have you done with your T in July ?
Replies: 69
Views: 16173

Re: What have you done with your T in July ?

My first attempt at brazing. I whipped up a license plate bracket
0648063B-65FB-470B-AFF5-24BDC9D0D10B.jpeg
89CD759D-0E33-41DE-9437-B4B5D5BCF19A.jpeg
DB6DA75A-1B18-4DB1-A687-DF840A74E8AC.jpeg
0C21816F-5EAE-4DA7-90D0-4BFA5F7182C2.jpeg
by Daniel828
Mon Jul 20, 2020 7:28 pm
Forum: General Discussion Forum
Topic: documents storage ideas
Replies: 3
Views: 1820

documents storage ideas

does anyone have any pics of how and/or where they keep their documents and wallets and cell phones ?
I have a homemade depot hack body and im trying to come with a creative way to store this stuff. id like to get a vintage ford little metal box or something like that
any ideas?
thanks
by Daniel828
Mon Jul 06, 2020 11:26 pm
Forum: General Discussion Forum
Topic: Post Your 4th T Pictures
Replies: 34
Views: 9171

Re: Post Your 4th T Pictures

6E97BE9A-CE68-4EBB-A24F-3419DBAE8A17_1_201_a.jpeg
by Daniel828
Wed Jun 10, 2020 11:15 pm
Forum: General Discussion Forum
Topic: Timing
Replies: 8
Views: 3354

Re: Timing

I installed a flapper style timer recently What ive noticed with a little test, is that the timing is occurring at different degrees from cylinder to cylinder For example I started with the first cylinder, the starting handle pin was a little past horizontal and I made a mark when the coil started b...
by Daniel828
Mon Apr 06, 2020 11:14 am
Forum: General Discussion Forum
Topic: Henry Ford as we’ve seldom seen him
Replies: 11
Views: 4562

Re: Henry Ford as we’ve seldom seen him

Does anyone know if a replica of the tractor in the museum, has been built? Seems like that would be a cool project
by Daniel828
Sun Dec 22, 2019 11:15 pm
Forum: General Discussion Forum
Topic: I thought only Ford was sloppy with their brazing during production
Replies: 11
Views: 4403

Re: I thought only Ford was sloppy with their brazing during production

Dan, that pic of the kid brazing the pans is awesome. Look at the size of the pipes that supplied the gas for the flames!?! At least I think that’s what I’m looking at I always wondered how they did the brazing. I pictured a guy with a torch working on his pile. Didn’t realize it was kinda automated
by Daniel828
Tue Nov 26, 2019 11:31 pm
Forum: General Discussion Forum
Topic: License Plates
Replies: 8
Views: 4066

Re: License Plates

Those plates look great. So let me gets this straight. In California you can use the original 1915 plates as the cars current plates? Does anybody know if I can do this in New Jersey? I asked this question at the dmv not too long ago and the clerk looked at me like I was crazy, so I dropped it. Lol
by Daniel828
Sun Nov 10, 2019 3:39 pm
Forum: General Discussion Forum
Topic: A little parts quiz
Replies: 29
Views: 8774

Re: A little parts quiz

Dang, I was putting a new armature into my generator and saw that felt seal washer and thought for sure I was onto something
by Daniel828
Sat Nov 09, 2019 11:13 pm
Forum: General Discussion Forum
Topic: A little parts quiz
Replies: 29
Views: 8774

Re: A little parts quiz

Yup. That’s the felt retainer on the bearing on the brush plate end of the generator. Is that the washer in Steve’s pics?
by Daniel828
Sat Nov 09, 2019 5:57 pm
Forum: General Discussion Forum
Topic: A little parts quiz
Replies: 29
Views: 8774

Re: A little parts quiz

I think I found what the washer is from
009D734D-1DAA-4FC9-A498-292EDE4DEF73.jpeg
FA27D9E9-D422-4B59-B611-5731B1BDFF69.jpeg
Does this resemble the one Steve posted?. I can’t tell the size from his pics
by Daniel828
Mon Oct 28, 2019 6:25 pm
Forum: Classifieds - Parts
Topic: WTB generator armature
Replies: 2
Views: 1654

WTB generator armature

I’m looking for a tested generator armature. I’ve rebuilt my generator , except for the armature , and I’m not getting any voltage out. So I’m in need of just the armature
Thank you
Dan
by Daniel828
Sat Oct 26, 2019 1:15 pm
Forum: General Discussion Forum
Topic: Electrical connectors
Replies: 13
Views: 5052

Re: Electrical connectors

Got it. I know what I’m going to do now. Thank you everyone :D
by Daniel828
Sat Oct 26, 2019 12:37 pm
Forum: General Discussion Forum
Topic: Electrical connectors
Replies: 13
Views: 5052

Re: Electrical connectors

Yeah cool. I’ve seen those parts listed on some parts house websites. I don’t quite understand how they work. Does the metal bullet connector plug into tha back of a different one ? And they are installed inside the black covering?
by Daniel828
Sat Oct 26, 2019 11:20 am
Forum: General Discussion Forum
Topic: Electrical connectors
Replies: 13
Views: 5052

Re: Electrical connectors

Original Smith I thought about that but I’m using a homemade depot hack body and the way I have my wiring harness routed, a new harnes would still be short
But thank you for suggestion

George. Thank you for part numbers , I’ll take a look at them. Sounds about what I’m looking for
by Daniel828
Sat Oct 26, 2019 9:18 am
Forum: General Discussion Forum
Topic: Electrical connectors
Replies: 13
Views: 5052

Electrical connectors

Does anyone know if auto industry from the 1920s used any kind of connector or plug in any of the cars? I’d like to add a couple connectors into my headlight wiring harness. I bought a “lot” of model t parts from eBay and there was a wiring harness included but it was hacked up a little bit and the ...
by Daniel828
Sat Oct 26, 2019 8:57 am
Forum: General Discussion Forum
Topic: What have you done to your T in October?
Replies: 77
Views: 23546

Re: What have you done to your T in October?

B68F7392-A289-4B5B-BDDD-DA96A5AAD4BF.jpeg 9F56001D-7655-497C-9D91-E706CB3E6DBD.jpeg 33F65390-B5FB-4DB7-8A89-1C6783090186.jpeg I got the QQ antique New Jersey plates yesterday. The woman at the DMV was so excited about the old car she was showing her employees the pics of the car Well they raised a ...
by Daniel828
Sat Oct 26, 2019 8:29 am
Forum: General Discussion Forum
Topic: Registration holder
Replies: 7
Views: 3417

Re: Registration holder

Thank you for all the great replies. I built my seat so it’s hinged and lockable. I guess I’ll try to find some sort of cool antique tin box to keep under there.
by Daniel828
Fri Oct 25, 2019 9:59 pm
Forum: General Discussion Forum
Topic: Registration holder
Replies: 7
Views: 3417

Registration holder

I’m putting together a home made depot hack/huckster. I just received my reg and insurance cards. What are some ideas as to where to store these documents ?
by Daniel828
Wed Oct 23, 2019 8:17 am
Forum: General Discussion Forum
Topic: Super Duty Fordson Truck?
Replies: 8
Views: 4219

Re: Super Duty Fordson Truck?

Does the truck use a normal model t engine. ? Seems a lot to ask from a 20 hp motor
by Daniel828
Wed Aug 21, 2019 7:24 pm
Forum: General Discussion Forum
Topic: Inner Tubes
Replies: 47
Views: 12765

Re: Inner Tubes

Alan, good eye. They are in fact bicycle tube patches lol. It’s all I had . I keep getting these pin holes I can see them developing the inner circumference of the tube. They are right in line with the he edge of the rim strip. I was thinking maybe the edge of the strip was digging into the tube and...
by Daniel828
Tue Aug 20, 2019 7:46 pm
Forum: General Discussion Forum
Topic: Inner Tubes
Replies: 47
Views: 12765

Re: Inner Tubes

Sorry for the bad pic. I can take another with better light if need be. These tubes are mounted on wire wheels. I thought at first the edge of the rim strip was causing the problem, so I removed the rim strip as a test and the tube continues to develope these pock marks Its only affecting one wheel ...
by Daniel828
Tue Aug 20, 2019 7:44 pm
Forum: General Discussion Forum
Topic: Inner Tubes
Replies: 47
Views: 12765

Re: Inner Tubes

Is this the splitting issue you guys are talking about on the custom classic tunes?
1A80CD7A-0A00-4301-8DC0-ED211993375E.jpeg
by Daniel828
Mon Jun 24, 2019 8:48 pm
Forum: General Discussion Forum
Topic: Our greenfield village tour
Replies: 9
Views: 4576

Re: Our greenfield village tour

We did the rouge tour and the museum today. Yesterday was the village. Tomorrow is our last full day so we r going to try to get to Fairlane and maybe see the Motown museum and possibly the piquette plant. I tried to get here for the old car festival but this trip was planne around my wife’s work sc...
by Daniel828
Mon Jun 24, 2019 5:51 pm
Forum: General Discussion Forum
Topic: Our greenfield village tour
Replies: 9
Views: 4576

Re: Our greenfield village tour

Some random pics
by Daniel828
Mon Jun 24, 2019 5:48 pm
Forum: General Discussion Forum
Topic: Our greenfield village tour
Replies: 9
Views: 4576

Our greenfield village tour

My family and myself have been enjoying the the Henry Ford museum and the greenfield village. My wife is not a car person but was blown away by the property. She said she going to suggest that her company hold conferences here in the future. WIN for me!! Lol. My head is on a swivel. It’s my first ti...
by Daniel828
Sun Jun 09, 2019 5:34 pm
Forum: General Discussion Forum
Topic: Back in the USA - my first drive with the Ford special racer
Replies: 14
Views: 6679

Re: Back in the USA - my first drive with the Ford special racer

Rob , is this car based on the fairgrounds racer with frank pictured in the drivers seat? If so how’d you get a pic of the exhaust side of the car ? This is a very cool build I’ll have to go back and read your build write up on it
Thanks and keep up the good work
by Daniel828
Thu May 16, 2019 11:44 pm
Forum: General Discussion Forum
Topic: 8in1 American Convertible Motor Truck Body " restoration"
Replies: 148
Views: 43459

Re: 8in1 American Convertible Motor Truck Body " restoration"

Dallas, where did you buy the top material and the hidem welting?
Looks great!!!
Thanks
Dan
by Daniel828
Thu May 16, 2019 8:44 pm
Forum: General Discussion Forum
Topic: Taking family to The Henry Ford in June
Replies: 11
Views: 5231

Re: Taking family to The Henry Ford in June

Thanks oldav8tor. That’s some great news I’ll check out those tix prices
@rob Patterson Great pics. Thanks for posting those
Thank you everybody. Keep the trip tips coming :D
by Daniel828
Tue May 14, 2019 9:28 pm
Forum: General Discussion Forum
Topic: Taking family to The Henry Ford in June
Replies: 11
Views: 5231

Re: Taking family to The Henry Ford in June

@modelt46 my T unfortunately doesn’t have a serial number. The block was rebuilder unit with a blank ser. number But thank you for suggestions @oldav8tor I have two boys 7 and almost 10. My wife is going to Grand Rapids for work meeting for a day then we’ll rent a car and go to Detroit We r staying ...
by Daniel828
Tue May 14, 2019 4:26 pm
Forum: General Discussion Forum
Topic: Taking family to The Henry Ford in June
Replies: 11
Views: 5231

Taking family to The Henry Ford in June

I’m taking the family to the Henry Ford and the village the weekend of June 22. Can any shed some light on what to do there? It’s seems so overwhelming to me as to what to see and do there
Thank you
Dan
by Daniel828
Wed May 01, 2019 7:06 pm
Forum: Classifieds - Parts
Topic: WTB 26-7 brake parts
Replies: 1
Views: 1582

WTB 26-7 brake parts

Hi
I’m looking for 26-7 wire wheel drums and the arms that attaches to emergency brake cams
Thank you
Dan
by Daniel828
Sun Apr 28, 2019 12:20 am
Forum: General Discussion Forum
Topic: What have you done with your Model T in April?
Replies: 121
Views: 39365

Re: What have you done with your Model T in April?

I had my first drive in my car yesterday. I have vid of it but can’t figure how to post a vid. So here’s a pic
024A5808-16B1-44E0-986F-0657E85686C9.jpeg
It’s not done yet but it’s getting closer
Thanks
Dan
by Daniel828
Sun Apr 14, 2019 11:20 pm
Forum: General Discussion Forum
Topic: What have you done with your Model T in April?
Replies: 121
Views: 39365

Re: What have you done with your Model T in April?

I rolled my project out of the garage the other day for the first time ever. This car was made from parts acquired from friends and visits to Hershey
It was going to be a speedster but I’m changing direction and I’m going to build a depot hack body for it
by Daniel828
Mon Apr 08, 2019 4:49 pm
Forum: General Discussion Forum
Topic: What have you done with your Model T in April?
Replies: 121
Views: 39365

Re: What have you done with your Model T in April?

Ive gotten my speedster on the ground this just today.
Still lots of work to do but getting closer
by Daniel828
Sat Mar 23, 2019 10:24 pm
Forum: General Discussion Forum
Topic: Pulled Nuthin’ Special out
Replies: 27
Views: 10060

Re: Pulled Nuthin’ Special out

And yes you and Clayton have been a big inspiration from completely across the country
by Daniel828
Sat Mar 23, 2019 10:23 pm
Forum: General Discussion Forum
Topic: Pulled Nuthin’ Special out
Replies: 27
Views: 10060

Re: Pulled Nuthin’ Special out

I’ll get some more pics tomorrow. Only the front half is together. I just finished rebuilding the rear from a bunch of parts from different rears. Lol. It’s ready to go in the car but my OT Oldsmobile needs the heads redone and that job got moved to the front burner so the T is back burnered It’s ho...
by Daniel828
Sat Mar 23, 2019 10:06 pm
Forum: General Discussion Forum
Topic: Is this some kind of joke?
Replies: 23
Views: 9588

Re: Is this some kind of joke?

FD4029ED-3E0C-4EF5-B146-6C0020E1B90E.jpeg
I found this in the garbage can at Hershey this year
This is after I cleaned it up It was bad shape when I found it but unfortunatly I cant find the original pics
by Daniel828
Fri Mar 22, 2019 8:57 pm
Forum: General Discussion Forum
Topic: Pulled Nuthin’ Special out
Replies: 27
Views: 10060

Re: Pulled Nuthin’ Special out

Thanks Tim Mines not going o be that low. I’m using the Z brackets from eBay, on the back And the front is lowered a la Claytons style tha he and Chris used on the Becker special I have one more question. Do You know the seats that are used on your car? They look like a dirt track race car seat or s...
by Daniel828
Thu Mar 21, 2019 5:34 pm
Forum: General Discussion Forum
Topic: Pulled Nuthin’ Special out
Replies: 27
Views: 10060

Re: Pulled Nuthin’ Special out

Hi Tim. Love that car. I’m building a similar speedster A real cutdown, no body etc.
Do you have any write up about the build on that car?
Oh and nuthin special is awesome too @powerwagonmaniac1