Search found 271 matches

by DickC
Tue Feb 20, 2024 10:29 am
Forum: OT - Off topic
Topic: What's your MODERN? :)
Replies: 51
Views: 1913

Re: What's your MODERN? :)

I have a 1988 Mustang 5.0 convertible daily driver (180,000 miles original and unmolested), a 2010 Ram 2500 tow vehicle and a 2006 Ford E250 work van. I don't believe in trading cars very often.
by DickC
Tue Feb 20, 2024 10:11 am
Forum: General Discussion Forum
Topic: No Free Starts. Should I Be Concerned?
Replies: 10
Views: 540

Re: No Free Starts. Should I Be Concerned?

I have a 1912 that has lower compression but dose not effect the running. I get an unusual number of free starts. Unlike others that have indicated that coldness effects the free start, I get a free start many times when I have a first start of the day. It may have a lot to do with the starting proc...
by DickC
Tue Feb 06, 2024 7:01 pm
Forum: General Discussion Forum
Topic: T trailering question
Replies: 40
Views: 1705

Re: T trailering question

Tie downs have been a concern of mine for a long time when securing a T. I have several cars that I haul on both open and closed trailers and the tie down issue applies to both and open and closed trailers. For years I was happy to hook to the front axle and then the rear axle. Never had a problem a...
by DickC
Fri Jan 26, 2024 7:38 pm
Forum: General Discussion Forum
Topic: Brass Radiator repair questions
Replies: 29
Views: 1101

Re: Brass Radiator repair questions

I have an idea that has not been proven but just a thought. I have had a "paintless dent removal" done to several dents on my original 1988 Mustang 5.0. I was amazed with the result. If in this case of the radiator, would it be possible to open a one inch hole in the back of the tank so the rods use...
by DickC
Sat Jan 20, 2024 1:52 pm
Forum: General Discussion Forum
Topic: Demountable rims need latch repair
Replies: 9
Views: 332

Re: Demountable rims need latch repair

Not to belabor the issue but it may be a good thing you bought the rims with matching wheels. The Canadian wheels my be Kelsey and the rims are not interchangeable with other makers. Just my limited experience!!
by DickC
Mon Jan 08, 2024 5:14 pm
Forum: General Discussion Forum
Topic: January 6 (Now T related)
Replies: 15
Views: 1145

Re: January 6

Here we have a perfect example of intolerance in our country!!!!!
by DickC
Wed Nov 15, 2023 3:54 pm
Forum: General Discussion Forum
Topic: Rear axles bearing grease looks like oil
Replies: 39
Views: 1632

Re: Rear axles bearing grease looks like oil

It sounds like oil is seeping passed the fourth main. Check the amount of grease at the universal. I have found that packing this will help to keep oil from going down the torque tube.
by DickC
Mon Nov 06, 2023 5:32 pm
Forum: General Discussion Forum
Topic: Making a 1913 dash board
Replies: 76
Views: 5062

Re: Making a 1913 dash board

I certainly don't have the vast amount of knowledge that I have read on this subject. I don't even have half vast knowledge on this subject. I was told and have seen on 1913 T's there are offset flange bolts on the steering column. I understood that the offset was on 1913 only. Was I told incorrectly?
by DickC
Thu Nov 02, 2023 9:03 pm
Forum: General Discussion Forum
Topic: Berg's Radiator neck
Replies: 18
Views: 1038

Re: Berg's Radiator neck

Leaks like this are not unique to this supplier. I have a brass radiator (for a 1912 T) supplied by the other supplier and also installed wings. The neck on this radiator should had three rivets but didn't have any. I installed the radiator and liked the look of wings and motor meter. Leaked the fir...
by DickC
Mon Oct 09, 2023 3:41 pm
Forum: General Discussion Forum
Topic: Detachable Rims
Replies: 19
Views: 687

Re: Detachable Rims

Allen from down under-not to belabor the issue, but I bought a 25 coupe that had a good tire mounted on the spare which was mounted on the rear carrier. One tire was bad on the car and while I was doing fixit stuff on the car and before I bought tires I attempted to mount the spare. I could not do i...
by DickC
Sun Oct 08, 2023 7:46 am
Forum: General Discussion Forum
Topic: Detachable Rims
Replies: 19
Views: 687

Re: Detachable Rims

Kelsey was a wheel/rim that was used mostly in Canada. The rims are so close they are sometimes mistaken for Hayes. The lug positions and valve hole on the wheel will not allow them to interchange. I bought a 24 that had beautiful wheels. It took me a few rides to figure out why it tended to loop do...
by DickC
Mon Jul 17, 2023 8:25 pm
Forum: General Discussion Forum
Topic: Applying power directly to a starter
Replies: 19
Views: 1328

Re: Applying power directly to a starter

I converted to 12 volts about a year ago and have not had any issues. Others have warned me as well as others have said they have had no problem. It may have something to do how you use it. Always retard spark, make sure you have throttle open, and don't grind starter for long time. Seems to work!!
by DickC
Sat Apr 22, 2023 8:19 pm
Forum: General Discussion Forum
Topic: 25 COUPE VALUE
Replies: 16
Views: 1189

Re: 25 COUPE VALUE

I don't know where she advertised this car but I have a 25 almost exactly like this one and would not take less that $15,000. In fact, I have been offered almost that after I installed the new upholstery.
by DickC
Thu Apr 20, 2023 8:39 pm
Forum: General Discussion Forum
Topic: 26 Coupe Interior
Replies: 3
Views: 670

Re: 26 Coupe Interior

I'm sorry I can't help with your request. I have a 25 coupe that I replaced the interior. A fellow club member is a professional upholsterer and replaced my interior. He uses a vinyl coated material that is fairly stiff and will not be affected by moisture. I have used MDF for woodworking projects i...
by DickC
Sat Apr 15, 2023 5:28 am
Forum: General Discussion Forum
Topic: Delivery Car Project Build
Replies: 126
Views: 14022

Re: Delivery Car Project Build

You are a little ways from making and installing the seat bottom but I wanted to tell you what I did on my original Depot Hack. The leather seat bottom got very warn and rather ugly from removing it when getting access to the gas tank. I made a new seat 3/4 of an inch narrower. I used a brass piano ...
by DickC
Fri Mar 31, 2023 7:50 pm
Forum: Classifieds - Parts
Topic: FOR SALE 50 year old collection of "T" parts one by one
Replies: 19
Views: 5086

Re: FOR SALE 50 year old collection of "T" parts one by one

Sorry I'm late seeing your add. I didn't know I needed an ignition switch until now. I have a 25 coupe that has an after market (repo) switch that isn't worth dealing with. That is all the dealers have. I need an original, usable switch.
by DickC
Thu Mar 30, 2023 4:32 pm
Forum: Classifieds - Parts
Topic: Excellent Surplus Parts For Sale
Replies: 31
Views: 4758

Re: Excellent Surplus Parts For Sale

Have you sold the ignition switch for 1925?
by DickC
Thu Mar 09, 2023 4:58 pm
Forum: General Discussion Forum
Topic: Tulare co. Fairgrounds swap meet
Replies: 10
Views: 1430

Re: Tulare co. Fairgrounds swap meet

I'm in Harnett Co. How far is it to Tulare Co.? When one advertises something and the location, it would help the indicate the State.
by DickC
Thu Mar 02, 2023 4:44 pm
Forum: General Discussion Forum
Topic: Hershey 2023
Replies: 6
Views: 964

Hershey 2023

I know this is not T but related to our hobby. I am confused on the dates for Hershey. They changed the days for last year so we entered the field on Monday morning for set up and finished on Friday for the car show. The yellow information sheet in the package for registration states that the fall m...
by DickC
Thu Feb 09, 2023 6:04 pm
Forum: General Discussion Forum
Topic: I don't think Hank done it this a-way . . .
Replies: 16
Views: 2212

Re: I don't think Hank done it this a-way . . .

I have used a bead breaker that my son had. It is called beadbuster 455. It did the job on tires like you have. Look it up on Amazon.
by DickC
Fri Feb 03, 2023 3:21 am
Forum: OT - Off topic
Topic: manifold cooker reipe chili
Replies: 1
Views: 519

manifold cooker reipe chili

I need tom try to cook chili in the manifold cooker. Has anyone done this successfully?
by DickC
Sat Jan 21, 2023 1:24 pm
Forum: General Discussion Forum
Topic: Need help, off topic, please read.
Replies: 33
Views: 2424

Re: Need help, off topic, please read.

I would check the drain vent for the sink first, if that is the way your system is plumbed. I have seen vent pipes plugged by acorns deposited for later use. If you don't have a vent pipe through the roof I would check the studor valve next to the sink.
by DickC
Wed Dec 28, 2022 6:32 pm
Forum: General Discussion Forum
Topic: Depot Hack rear fender differences.
Replies: 10
Views: 931

Re: Depot Hack rear fender differences.

Back in the early 80's I was putting together a hack body to go on a 22 frame. Never finished it because of job and location change. Any way, I knew I needed special fenders and located one at Hershey. I kept looking and found another but when I compared it to the one I had, it was the same side, (l...
by DickC
Tue Dec 27, 2022 4:11 pm
Forum: General Discussion Forum
Topic: Mounting Tires on 1912 Clincher Rim Advice
Replies: 30
Views: 2191

Re: Mounting Tires on 1912 Clincher Rim Advice

I like the ideas of using a trash bag and the rim shield but I have used another method for years. I have four pieces of leather about 3 inches by 6 inches that I put over the rim under the tire iron. I keep moving the leather so it is under the tire iron. I use three tire irons. Always get the tire...
by DickC
Tue Dec 13, 2022 6:27 pm
Forum: Classifieds - Parts
Topic: 1925 ignition switch
Replies: 1
Views: 503

1925 ignition switch

Looking for a good/working ignition switch. I've had two "new" switches that failed in one way or another quickly after installation. The one that is presently installed fails at times because the keyway is so loose the contacts fail and the key almost falls out. I want to get back to an original sw...
by DickC
Sun Dec 04, 2022 3:11 pm
Forum: General Discussion Forum
Topic: Intro and my TT project
Replies: 57
Views: 6413

Re: Intro and my project

You may want to hope the other drums are good in your original engine. In addition to the cracked drum, the others look like they have deep scores which will destroy the bands quickly.
by DickC
Fri Dec 02, 2022 7:07 pm
Forum: General Discussion Forum
Topic: Time to change from open cars to a Coupe
Replies: 14
Views: 1528

Re: Time to change from open cars to a Coupe

I'm with you!! I got tired of missing out on club events because of the cars I have/had. I was stuck on open cars and that is all I've had for years. In T's (I've had 6 touring) and a beautiful 12 Hack (a permanent keeper). I also have a 27 Marmon E-75 4 passenger speedster (for sure a keeper). Beca...
by DickC
Sun Nov 27, 2022 4:23 am
Forum: General Discussion Forum
Topic: Severe front end shake? Shackles?
Replies: 25
Views: 2087

Re: Severe front end shake? Shackles?

Everything that has been said should fix the problem. I had these issues with my 12 hack and applied all the fixes. They worked except sometimes when I crossed a railroad track at an angle I would get the T death dance. Having gone through all the fixes I resorted to the accessory shock absorber tha...
by DickC
Thu Nov 17, 2022 5:22 pm
Forum: General Discussion Forum
Topic: While my T has lost it's head - block and head cleaning
Replies: 31
Views: 2437

Re: While my T has lost it's head - block and head cleaning

I don't want to jump on your forum question but I have a related question. Does the carbon build up cause a problem (other than on the valves) running the engine? I have a sweet running 1912 that has some carbon build up on the cylinders. This engine runs so well and is timed well so as to give me a...
by DickC
Sun Oct 09, 2022 6:43 am
Forum: General Discussion Forum
Topic: HINGE MOUNT MIRRORS FOR 25 COUPE
Replies: 3
Views: 674

HINGE MOUNT MIRRORS FOR 25 COUPE

I cannot find "original" mirrors for my T. Dealers have nice looking mirrors for hinge mount but they are labeled for model A. Has anyone used them and what if any modification is required?
by DickC
Sat Oct 08, 2022 3:47 pm
Forum: OT - Off topic
Topic: spotted lanternfly
Replies: 0
Views: 536

spotted lanternfly

See general discussion forum
by DickC
Sat Oct 08, 2022 3:42 pm
Forum: General Discussion Forum
Topic: spotted lanternfly
Replies: 7
Views: 1278

spotted lanternfly

This may be off topic here but I felt more would see it. For those that attended the Hershey flea market with trucks/trailers/motor homes be aware of the latest invasive bug taking over in the north east (pa.) PLEASE INSPECT YOUR RIGS AND FUMIGATE THE INSIDE for these bugs. I am told that they will ...
by DickC
Sat Oct 01, 2022 3:23 am
Forum: General Discussion Forum
Topic: Hershey weather
Replies: 14
Views: 2721

Re: Hershey weather

We usually get there he night before entry day. We line up on the circle road and sleep until seven when they let us onto the choc. field. I heard that they will not allow that this year. Is that true?
by DickC
Tue Sep 20, 2022 8:01 pm
Forum: General Discussion Forum
Topic: 2 post hoist
Replies: 16
Views: 2013

Re: 2 post hoist

Not to be labor the point but I also use the four post lift for other cars and trucks. I have a Marmon that would require extensions to clear the running boards. I have worked under a car without extensions and working on the front of the car caused movement. Was it dangerous? I don't think so. If I...
by DickC
Mon Sep 19, 2022 10:22 pm
Forum: General Discussion Forum
Topic: Dealing with a change in the oil supply
Replies: 12
Views: 1796

Re: Dealing with a change in the oil supply

I have been getting valvolene 20/50 racing oil from Walmart through Amazon.
by DickC
Mon Sep 19, 2022 10:18 pm
Forum: General Discussion Forum
Topic: 2 post hoist
Replies: 16
Views: 2013

Re: 2 post hoist

The reason I have a four post lift is because I didn't feel comfortable with long extensions. Just my opinion.
by DickC
Mon Aug 01, 2022 8:39 pm
Forum: General Discussion Forum
Topic: Compression
Replies: 10
Views: 1280

Re: Compression

Thanks for the replies. I will try the drops of oil and open throttle technique to see if it makes a difference. In regard to the question on oil consumption, the last tour we took this T on was fairly flat,(rolling hills) that required frequent compression slow downs as I try to keep the speed arou...
by DickC
Mon Aug 01, 2022 7:12 am
Forum: General Discussion Forum
Topic: Compression
Replies: 10
Views: 1280

Compression

What is acceptable? I have a 25 coupe and the compression for each cylinder is 38-39 pounds. Engine runs smooth and seems to have enough power for tours. I took the compression in hopes of finding an answer to oil consumption. Have checked all areas for leaks, no drips, rear end for oil seepage pass...
by DickC
Thu Jul 28, 2022 4:58 pm
Forum: General Discussion Forum
Topic: Modern dip stick install
Replies: 10
Views: 1376

Re: Modern dip stick install

I have had this on two of my T's. After you finish bending and installing, don't expect the dip stick to go in easily. It takes a little persuasion but it is not too difficult to insert. I suggest that you drain the oil after installation and refill with the recommended quantity. Insert the dip stic...
by DickC
Tue Jul 19, 2022 6:56 am
Forum: General Discussion Forum
Topic: Model T Tour Guidance
Replies: 18
Views: 2229

Re: Model T Tour Guidance

Touring along a road at 32 mph that has several modern cars also using the road, have you ever noticed that cars approaching you often give you the "thumbs up" hand sign but those passing you from behind often have a different hand sign!!!
by DickC
Sun Jul 10, 2022 4:06 am
Forum: General Discussion Forum
Topic: Battery 12v shut-off switch
Replies: 11
Views: 1402

Re: Battery 12v shut-off switch

On the seat riser is where I installed mine on my 25 coupe.
by DickC
Wed Jul 06, 2022 8:06 am
Forum: General Discussion Forum
Topic: Spoke Replacement, which wheel do I have
Replies: 20
Views: 2171

Re: Spoke Replacement, which wheel do I have

Here is my two cents!! You stated that you are not concerned with the mix of Hayes/Ford with Kelsey rims or vice versa. I know that they will not fit and will in a non-concentric way if you force them to fit. You will have a car that will "lope" down the road. That is to say, each wheel will have a ...
by DickC
Sun Jul 03, 2022 7:46 am
Forum: General Discussion Forum
Topic: T’s in a Parade on America’s Birthday add to it
Replies: 14
Views: 2172

Re: T’s in a Parade on America’s Birthday add to it

Everyone loves seeing a T in a parade but not so much when behind one on a winding country road!!!!!!!!!!!
by DickC
Sat Jul 02, 2022 1:09 am
Forum: General Discussion Forum
Topic: Rough acceleration and coughing back through the carb
Replies: 29
Views: 2877

Re: Rough acceleration and coughing back through the carb

I'm still learning about Model T's after having owned, driven and worked on them for over 50 years. So bare with me. I don't know the year of your T but if it is one that you drive with a mag vs battery you may want to check the mag output. I have had the same kind of issues with an early T running ...
by DickC
Thu Jun 16, 2022 7:59 pm
Forum: General Discussion Forum
Topic: running on mag is problematic
Replies: 10
Views: 1523

Re: running on mag is problematic

The MAG is problematic!!!! I recently opened the hogs head to adjust the high speed clutch. As I removed the cover and the filter, something fell out of the filter and plinked to the bottom of the transmission. A light revealed the small bar that holds the magnets. The net result was to remove the e...
by DickC
Thu Jun 16, 2022 4:54 am
Forum: General Discussion Forum
Topic: Brass cleaner suggestions?
Replies: 37
Views: 4428

Re: Brass cleaner suggestions?

I have a 1912 hack with all the brass that goes with a 12. About 15 years ago I made a terrible mistake by taking it on our club tour that was based on Ocean Isle Beach in North Carolina. We toured for a week and about three days after I returned home I lifted the cover to find the worst case of bra...
by DickC
Tue Jun 14, 2022 8:41 am
Forum: General Discussion Forum
Topic: Split rim latch
Replies: 13
Views: 1746

Re: Split rim latch

I guess it goes without saying but I will anyway, Kelsey rims must go on Kelsey wheels. Kelsey rims will not go on Hayes or some other wheels.
by DickC
Wed May 25, 2022 8:43 am
Forum: General Discussion Forum
Topic: Where to get monocle windshield glass??
Replies: 13
Views: 1734

Re: Where to get monocle windshield glass??

If you are using an original monocle frame/bracket this comment may not apply. If you are using a "new" frame/bracket please sight it for curvature. I helped a friend install a new laminated safety glass into the frame. All went well and the end result was perfect. The car was in storage for about a...
by DickC
Tue May 03, 2022 10:50 pm
Forum: General Discussion Forum
Topic: MAGNETO OR NOT
Replies: 27
Views: 2886

Re: MAGNETO OR NOT

Thanks for all the comments, hints and support. This should be my last update. Finished the clean-up and removal of the magneto with the help of Clyde Mengis in Fayetteville NC. Looking over the rods and journals and the rest of the inside of the engine I was impressed with the great condition of th...
by DickC
Tue May 03, 2022 7:37 am
Forum: General Discussion Forum
Topic: MAGNETO OR NOT
Replies: 27
Views: 2886

Re: MAGNETO OR NOT

Got the engine out, pan down and transmission off. I really was lucky to have decided to adjust the clutch when I did. In addition to the one mag clamp that fell out of the oil screen, I found two more in the pan and two more that were ready to let go on the mag. None of them were side by side to le...
by DickC
Sat Apr 30, 2022 8:27 am
Forum: General Discussion Forum
Topic: MAGNETO OR NOT
Replies: 27
Views: 2886

Re: MAGNETO OR NOT

Thanks for the comments. I am well aware of the potential destruction a loose magnet can cause. I have had T's for 50 years, rebuilt some, restored some but have never eliminated the mag. That is the question at hand. I am ready to pull the engine and am leaning toward eliminating the mag. I current...
by DickC
Sat Apr 30, 2022 12:47 am
Forum: General Discussion Forum
Topic: MAGNETO OR NOT
Replies: 27
Views: 2886

MAGNETO OR NOT

I needed to adjust the clutch on my 25 coupe and opened the transmission door. As I lifted the door (with the screen) I heard a clink. I looked into the transmission and found a magnet clamp. Not a good sign but glad I found it before any major damage. I have converted to a 12 volt system and altern...
by DickC
Mon Apr 11, 2022 1:37 pm
Forum: General Discussion Forum
Topic: oil for rear end?
Replies: 28
Views: 3244

Re: oil for rear end?

I have used "pourable grease". I get this from a friend who has some of the largest cranes in the South East. He has used it in his car collection which includes T's, early Cad's, Stutz and etc. I have not had a problem with it in three of my T's for about ten years.
by DickC
Wed Apr 06, 2022 4:31 am
Forum: General Discussion Forum
Topic: Is this a T rim or a Wanna-be?
Replies: 14
Views: 1878

Re: Is this a T rim or a Wanna-be?

I am not an expert on rims but have had some recent experience with a rim on a 25 I recently bought. I was told that the tire mounted of the spare tire carrier would not go on the wheels mounted on the car. I tried and he was correct. In looking at the rim I noticed that it had the "hinge" closer wh...
by DickC
Sun Apr 03, 2022 7:45 am
Forum: Classifieds - Vehicles
Topic: FS Unrestored Time-capsule
Replies: 41
Views: 13649

Re: FS Unrestored Time-capsule

It was running great when parked!!!!
by DickC
Tue Mar 29, 2022 8:08 am
Forum: General Discussion Forum
Topic: I Need Help
Replies: 12
Views: 2407

Re: I Need Help

I am a contractor and install storm doors frequently. I have the same issue with the small rubber scrub on the bottom sweep of the doors. What I have learned is: start the weather strip by sometimes using silicone dab on the very end of the strip grip the strip with pliers NOW THE TRICKY PART-once y...
by DickC
Wed Mar 02, 2022 2:25 am
Forum: General Discussion Forum
Topic: DRIVELINE CONCUNDRUM
Replies: 7
Views: 1352

Re: DRIVELINE CONCUNDRUM

Could it be a broken drive shaft? I had this happen to a 1920 I owned. I was driving up a slight grade and the car started to jerk (or seemed to throb). I soon realized I had no forward movement, no reverse and no brakes. To shorten this story, I found the drive shaft broken under the race at the re...
by DickC
Sun Feb 20, 2022 7:23 am
Forum: General Discussion Forum
Topic: Which years does this spark coil fit?
Replies: 21
Views: 2259

Re: Which years does this spark coil fit?

I can be corrected but the modification to coils by Henry was not "plastic" but made of a mixture of "soy bean". They did not last and he returned to the common wood design. Dick C.
by DickC
Mon Feb 07, 2022 9:25 am
Forum: General Discussion Forum
Topic: Who is making good early T radiators now?
Replies: 16
Views: 2975

Re: Who is making good early T radiators now?

Brass Works makes a very nice functioning radiator. I have two at this time. I also have had a problem with one and it is probably my fault. DO NOT use a "wings" radiator cap. I found that the extra weight and wind causes too much strain on the neck. I had two instances with one of the radiators and...
by DickC
Sat Jan 29, 2022 8:12 am
Forum: General Discussion Forum
Topic: 1911 fire wall and fire wall support
Replies: 9
Views: 1766

Re: 1911 fire wall and fire wall support

This may not be important and incorrect. I noticed that the firewall is drilled for the steering column bracket. I have been told that the lower hole is offset only on 1913. It looks like the firewall is drilled that way. I will not feel bad if I am corrected!!! Dick C.
by DickC
Mon Jan 17, 2022 8:43 am
Forum: General Discussion Forum
Topic: Trick for mounting tires with tubes and flaps....
Replies: 26
Views: 4097

Re: Trick for mounting tires with tubes and flaps....

In most cases there is a need to use tire irons to pry the tire over the rim. When doing this, however, care should be taken to not chip the painted rim. I use small pieces of leather under the irons to avoid this. In every case, heated tires go on much easier! Dick C. Can you tell that being locked...
by DickC
Mon Jan 17, 2022 8:29 am
Forum: General Discussion Forum
Topic: OT - All weather car cover suggestions needed
Replies: 8
Views: 1495

Re: OT - All weather car cover suggestions needed

Most of us in this situation use an enclosed trailer. Most of us with older vehicles, T's, need a trailer. They can be bought in many styles and conditions.
Some are even not road worthy but can be used to store vehicles and parts. Just a thought, Dick C.
by DickC
Sun Dec 19, 2021 8:33 am
Forum: General Discussion Forum
Topic: Kevlar Transmission Bands
Replies: 10
Views: 2166

Re: Kevlar Transmission Bands

Kevlar is great but have you considered Wood? I have been running wood linings in my T's for about ten years. Our club tours three times a year, Spring and fall usually 160 miles each and summer is about 450 miles, and then I don't know how many miles I drive in search of ice cream and other running...
by DickC
Thu Dec 02, 2021 3:38 am
Forum: General Discussion Forum
Topic: What kind of rim
Replies: 12
Views: 1865

Re: What kind of rim

I may be wrong but this looks like a standard Kelsey rim.
by DickC
Thu Dec 02, 2021 3:33 am
Forum: General Discussion Forum
Topic: Vibration Question
Replies: 18
Views: 2690

Re: Vibration Question

I forgot to add in my response, please when you find the problem tell us what it is/was. We don't learn if we are not told. Thanks!!
by DickC
Tue Nov 30, 2021 4:23 am
Forum: General Discussion Forum
Topic: Vibration Question
Replies: 18
Views: 2690

Re: Vibration Question

Experience tells me that you have a bad U-joint.
by DickC
Sun Nov 28, 2021 7:24 am
Forum: General Discussion Forum
Topic: Trying to Solve the Mystery !!
Replies: 17
Views: 2705

Re: Trying to Solve the Mystery !!

I can't debate colors but having had two T's that were unmolested in the past, I have some thoughts about the finish of the samples you took. All of the T's I have had were black so that is why I say that I cannot debate colors. However, in looking at your samples, they seem to have a slight texture...
by DickC
Sat Nov 27, 2021 1:11 pm
Forum: General Discussion Forum
Topic: How cold do you drive?
Replies: 88
Views: 20956

Re: How cold do you drive?

I don't have T story but I do relate to cold weather transportation. I grew up in Rhode Island which is not the warmest part of the USA in the winter. When I became of age to drive, the vehicle allowed was dad's 52 Ford F100. Dad was what some call "frugal" and others may call cheap. When he ordered...
by DickC
Fri Nov 19, 2021 6:47 pm
Forum: General Discussion Forum
Topic: Store my Lizzy over winter
Replies: 27
Views: 2787

Re: Store my Lizzy over winter

Brake fluid on tires--takes me back to the years I had the show car urge. At the time my vehicle was a 37 Packard, original and believe it or not it belonged to an elderly school teacher who lived near the school and only drove the Packard to the grocery store and church. I attended several shows du...
by DickC
Thu Nov 11, 2021 5:21 pm
Forum: General Discussion Forum
Topic: I Need Help Diagnosing My ‘25 Coupe…(Conclusion)
Replies: 24
Views: 2436

Re: I Need Help Diagnosing My ‘25 Coupe…

I guess you have found the problem and won't be fishing in the pan for some metal. If you ever need to go fishing however, I have used a magnet strip from the inside of older refrigerator gaskets. It is about 4 to 5 feet long and easily slides down the transmission door along the bottom of the pan. ...
by DickC
Thu Nov 11, 2021 5:04 pm
Forum: General Discussion Forum
Topic: Windshield Sun Visor on A Open Trailer….
Replies: 19
Views: 2496

Re: Windshield Sun Visor on A Open Trailer….

Don't stop by securing the sun visor. Please store the floor boards in a safe place out of the car. Also tie the hood down, I have used a ratchet strap in the past. I lost a floor mat before I realized what was happening and then when I did, I removed the floor boards. Some may also want to remove a...
by DickC
Thu Nov 11, 2021 4:51 pm
Forum: General Discussion Forum
Topic: what is this car? trying to id
Replies: 29
Views: 4431

Re: what is this car? trying to id

I can't believe no one recognizes this car. It is a 1904 Henweigh. Very rare!!!
by DickC
Thu Nov 11, 2021 5:10 am
Forum: General Discussion Forum
Topic: My '16 Touring appears running hot - please help
Replies: 44
Views: 4136

Re: My '16 Touring appears running hot - please help

While the focus of these comments has been the radiator, some attention should be given to the block. It has been my experience that some water passages can become blocked and restrict internal flow. I have disconnected the radiator input and output and attached a garden hose tor the inlet side and ...
by DickC
Sun Oct 31, 2021 7:41 am
Forum: Classifieds - Parts
Topic: Want to buy or borrow a rim spreader in NW Arkansas
Replies: 4
Views: 1214

Re: Want to buy or borrow a rim spreader in NW Arkansas

Mike, I hope you find the rim spreader. A word of caution on its use however. Being new to the world of split rims, I have several earlier T's, I used my split rim spreader to replace tires on a new purchase of a 1925. I made the mistake of cranking down on the spreader too far. Could have caused re...
by DickC
Fri Oct 29, 2021 4:47 pm
Forum: General Discussion Forum
Topic: Generator or Alternator for T
Replies: 17
Views: 2029

Re: Generator or Alternator for T

Lets talk about oil or how about the use of MMO!!!!!!!!
by DickC
Thu Oct 28, 2021 8:44 pm
Forum: OT - Off topic
Topic: FJ - Can You Repair A Bent Spindle Arm On A 7000 Pound Trailer Torsion Axle ?
Replies: 18
Views: 3406

Re: FJ - Can You Repair A Bent Spindle Arm On A 7000 Pound Trailer Torsion Axle ?

freighterjim, I am aware a hot tire can be caused by several things. Let me be clear about the situation I related above. When I analyzed the hot tire, I realized that the wheel seemed to look like it was toed in. I proved this by using two straight 4 foot levels placed against the center of the two...
by DickC
Thu Oct 28, 2021 5:19 pm
Forum: OT - Off topic
Topic: FJ - Can You Repair A Bent Spindle Arm On A 7000 Pound Trailer Torsion Axle ?
Replies: 18
Views: 3406

Re: FJ - Can You Repair A Bent Spindle Arm On A 7000 Pound Trailer Torsion Axle ?

Someone tell me the advantage to having a torsion axle trailer. I too had to replace an axle (7000 pound) on my newest trailer. I felt a jolt while driving at 55 mph and when I got to the tour sight (about 100 more miles) I noticed a tire looked worn and was very hot, couldn't touch it. I did not hi...
by DickC
Tue Oct 26, 2021 8:35 pm
Forum: OT - Off topic
Topic: An Electric Vehicle Company with Vision
Replies: 11
Views: 3211

Re: An Electric Vehicle Company with Vision

EV's are being recognized as the latest GREEN item for the general public. I may have missed this in the past but has there ever been a comprehensive evaluation of the total cost of the vehicle. WOMB to TOMB so to speak. If you start at the beginning of the process with cost of the raw material to m...
by DickC
Tue Sep 07, 2021 7:57 pm
Forum: General Discussion Forum
Topic: 4 Post Lift Recommendations….
Replies: 26
Views: 5486

Re: 4 Post Lift Recommendations….

The issue of raising the front end or rear end was solved by buying tall jack stands. I raise the lift to normal height and place these jack stands under the axle and lower the lift a couple of inches. The front or rear is lifted to work on wheels, brakes and just recently changed shackles on a 25 T...
by DickC
Tue Sep 07, 2021 12:26 am
Forum: General Discussion Forum
Topic: 4 Post Lift Recommendations….
Replies: 26
Views: 5486

Re: 4 Post Lift Recommendations….

One thing I didn't mention was I also thought about a two post lift. All my cars (T's and one Marmon) have frames above the running boards. It would require about a 12 inch adapter on the arms or like others use a 4x4 wood frame . I didn't think I would like to work under a heavy car with any additi...
by DickC
Mon Sep 06, 2021 5:16 pm
Forum: General Discussion Forum
Topic: 4 Post Lift Recommendations….
Replies: 26
Views: 5486

Re: 4 Post Lift Recommendations….

I looked at several before I bought a BenPac. Look at most of the tv shows on cars/car repairing/etc. and you will notice the lifts, both two post and four post are Ben Pac. I am happy with mine.
by DickC
Fri Sep 03, 2021 5:19 am
Forum: General Discussion Forum
Topic: Bad habit when starting
Replies: 30
Views: 6500

Re: Bad habit when starting

This is like the age old question, "do you wear it on the right or left?". I need to add to the comment by TXGOAT aka Pat, please check the ratchet for wear. I bought a 1915 and didn't realize it had a VERY worn ratchet. I cranked a quarter turn with my right hand and it slipped causing the back of ...
by DickC
Mon Aug 30, 2021 3:39 pm
Forum: General Discussion Forum
Topic: One more radiator question
Replies: 14
Views: 2316

Re: One more radiator question

I have a "barn find" that I went through prior to driving. It had been in a barn for about 20 years and needed a bendix, new ball cap bearing, and rear brakes. Changed oil, installed new bands and tested driving it on several local trips. Took it on a recent club tour. No problem until we had a rest...
by DickC
Sun Aug 22, 2021 7:35 pm
Forum: General Discussion Forum
Topic: Wet rear drums
Replies: 4
Views: 1322

Re: Wet rear drums

Kerry, It was a leather seal shaped like the new neoprene seal today. I think I understand the several suggestions in addition to the ones I made. However, since I replaced the "forth main" and filled the ball cap with grease, I have kept and eye on the differential and it is not getting additional ...
by DickC
Sun Aug 22, 2021 5:06 am
Forum: General Discussion Forum
Topic: Wet rear drums
Replies: 4
Views: 1322

Wet rear drums

I have recently bought two 1925 T's (one coupe and one roadster). When going through them area by area, I found both had wet rear drums. The coupe wasn't too bad but after removing the bearing and race found the inner seal was OK but not the new type. Cleaned everything, new inner seal and used the ...
by DickC
Fri Aug 06, 2021 7:56 am
Forum: General Discussion Forum
Topic: Rear End Oil
Replies: 27
Views: 4315

Re: Rear End Oil

I have been using something called "portable grease". I got it from a friend of mine who has several restored T's. He also has some of the largest cranes in the south east for his business. This product is what is used for gear boxes etc. on these cranes. He has used it in the T's for ever and it re...
by DickC
Mon Jul 26, 2021 2:06 pm
Forum: General Discussion Forum
Topic: Universal grease
Replies: 11
Views: 1931

Re: Universal grease

Have you heard of a product called "portable grease"? A friend who has some of the largest cranes made uses it on his cranes and in the rear ends of his collector cars. His collector cars go from T's to Stutz. I am using it in the rear end of all my T's. Better than "600" think. Maybe I will use it ...
by DickC
Wed Jul 21, 2021 6:49 pm
Forum: General Discussion Forum
Topic: New Updated Forum Rule
Replies: 12
Views: 3185

Re: New Updated Forum Rule

Does this "NEW RULE" only apply to one who manufactures/supplies a product and NOT a common user? Excuse me for thinking this but this seems to be like some of the media giants controlling what THEY think is appropriate. They then ban the subscriber from the system. I hope we haven"t reached that po...
by DickC
Wed Jul 21, 2021 5:11 pm
Forum: General Discussion Forum
Topic: New Updated Forum Rule
Replies: 12
Views: 3185

Re: New Updated Forum Rule

I am not a manufacturer!!! I have purchased products direct from the manufacturer. A comment appears on the FORUM about the problem a person is having with a product. Does this "NEW RULE' prohibit me from commenting about the pour quality of this product, the poor fit or some other issue that I too ...
by DickC
Wed Jul 21, 2021 5:01 pm
Forum: General Discussion Forum
Topic: Brakes for 25 roadster
Replies: 7
Views: 1420

Re: Brakes for 25 roadster

Thanks everyone. I ordered the one piece set.
by DickC
Tue Jul 20, 2021 8:06 pm
Forum: General Discussion Forum
Topic: Brakes for 25 roadster
Replies: 7
Views: 1420

Brakes for 25 roadster

Need brakes and looking at Lang's there are two types. One is a single shoe that is lines and the other is a two piece that is lined. Which is best and why? Need to order tomorrow!
by DickC
Mon Jul 19, 2021 2:46 am
Forum: General Discussion Forum
Topic: 26 Coupe Overheating
Replies: 13
Views: 2225

Re: 26 Coupe Overheating

I had the same problem with a 1924 touring. I could not figure out the cause after cleaning the radiator and the block. I ended up buying a new square tube radiator. When taking the old radiator off, I turned it over and heard a rattle sound. Turns out the baffle in the top tank let go and rested on...
by DickC
Thu Jul 08, 2021 1:21 am
Forum: General Discussion Forum
Topic: Feeling stupid - hard starting
Replies: 126
Views: 13687

Re: Feeling stupid - hard starting

Steve, hard starting and rough running after start sometimes means manifold leak. What many of us do is use a propane torch (UNLIT) and pointed around the manifold with the engine running. If there is a leak you will quickly notice engine RPM change.
by DickC
Thu Jul 01, 2021 1:56 am
Forum: OT - Off topic
Topic: Want to buy a motor home, but, which one?
Replies: 11
Views: 2850

Re: Want to buy a motor home, but, which one?

I have had 4 motor homes in the passed. Each was gas which allowed me to service/work on/repair it and that finally became the issue to end motor home ownership. Most of the time a motor home sits idle for a significant amount of time. When the occasional use takes place, there seems to be something...
by DickC
Thu Jul 01, 2021 1:22 am
Forum: General Discussion Forum
Topic: Ball cap measurement
Replies: 5
Views: 1195

Ball cap measurement

I can not get the micrometer on the tail shaft to get an accurate measurement. I am told that the end of the shaft is normally square but mine has a rounded off face. Not much but maybe an 1/8 rounded end. I can get the micrometer into the shaft be not far beyond the rounded off end.
by DickC
Mon Jun 28, 2021 1:20 pm
Forum: General Discussion Forum
Topic: Triad NC question
Replies: 8
Views: 1682

Re: Triad NC question

I moved from the cold country to Cary NC in 1979. In 1990, the folks in Cary made it known that my "kind" are not welcome to the posh neighborhoods and by mutual agreement we left Cary to the "elite" ones that don't appreciate motor homes, car trailers, and model T's. We bought into a horse developm...
by DickC
Sat Jun 19, 2021 5:24 am
Forum: General Discussion Forum
Topic: 1925 timing gear chewed up.
Replies: 10
Views: 2007

Re: 1925 timing gear chewed up.

I agree with NOT using the fiber gear. My question is: is this a natural occurrence or should I look for other things that would case me a problem with a metal gear? I am aware that the generator gear could have caused the problem but given I install a metal gear would there still be as much of a co...
by DickC
Fri Jun 18, 2021 10:14 pm
Forum: General Discussion Forum
Topic: 1925 timing gear chewed up.
Replies: 10
Views: 2007

1925 timing gear chewed up.

I bought this car knowing there was zero compression. I could see/feel the gear on the generator did not turn when hand cranking the engine. The pistons move freely. I felt that it was the timing gear and sure enough it was sitting there with very few teeth along the back edge of the gear. What are ...
by DickC
Fri Jun 18, 2021 9:58 pm
Forum: Classifieds - Parts
Topic: WTB 1925 roadster top header
Replies: 5
Views: 1198

Re: WTB 1925 roadster top header

I think I figured it out. When I bought the car, the top bows were wrapped up in plastic. I couldn't see the bow clearly and thought the front bow/header was missing. When I took it apart, all the bows were there. Thanks everyone for comments and help! Dick C.
by DickC
Thu Jun 17, 2021 10:33 pm
Forum: Classifieds - Parts
Topic: WTB 1925 roadster top header
Replies: 5
Views: 1198

WTB 1925 roadster top header

Just purchased 1925 T roadster. I have the top bows complete but missing the header above the windshield. The car has a slant windshield and the hold down clamps at the windshield are attached to the windshield posts. It looks like these clamps attach to the top header with screws. If someone has pl...