Search found 40 matches

by ClockDoc
Sun Sep 12, 2021 2:36 pm
Forum: General Discussion Forum
Topic: Bumpers on 24 Fordor
Replies: 5
Views: 1431

Re: Bumpers on 24 Fordor

Thanks for all the input! I'm going to forgo the bumpers and go with a Warford instead. :D
by ClockDoc
Wed Sep 08, 2021 9:52 pm
Forum: General Discussion Forum
Topic: Bumpers on 24 Fordor
Replies: 5
Views: 1431

Bumpers on 24 Fordor

I would like to install bumpers on my 24 Fordor and was wondering if the ones sold at Lang's for the 26-27 would work. I was going to use the split bumpers on the rear. Has any one done this?
by ClockDoc
Thu Dec 03, 2020 7:05 pm
Forum: Classifieds - Parts
Topic: 24 Fordor Interior Upholstery and Misc. Used Pieces
Replies: 2
Views: 1271

Re: 24 Fordor Interior Upholstery and Misc. Used Pieces

It was good talking other you Steve. I will get back to you with shipping cost as soon as I heal up some.
by ClockDoc
Tue Dec 01, 2020 1:25 pm
Forum: Classifieds - Parts
Topic: 24 Fordor Interior Upholstery and Misc. Used Pieces
Replies: 2
Views: 1271

24 Fordor Interior Upholstery and Misc. Used Pieces

I have front back and lower seats and rear back and lower seat covers padding and burlap, along with door panels and other misc. trim and a long grain roof cover that I took out of my fordor when I replaced the interior. It’s dirty but did not have holes or rips. Good for a car with patina. I also h...
by ClockDoc
Thu Jul 30, 2020 9:15 am
Forum: Classifieds - Parts
Topic: WTB 24 FORDOR R/R FENDER
Replies: 6
Views: 2555

Re: WTB 24 FORDOR R/R FENDER

by ClockDoc
Thu Jul 30, 2020 8:54 am
Forum: Classifieds - Parts
Topic: WTB 24 FORDOR R/R FENDER
Replies: 6
Views: 2555

Re: WTB 24 FORDOR R/R FENDER

:D Sold! Give me the particulars and I will have my sister pick it up. She lives in Struthers.

Thanks
by ClockDoc
Thu Jul 30, 2020 6:17 am
Forum: Classifieds - Parts
Topic: WTB 24 FORDOR R/R FENDER
Replies: 6
Views: 2555

Re: WTB 24 FORDOR R/R FENDER

Yes I am interested please send a picture
by ClockDoc
Wed Jul 29, 2020 10:00 pm
Forum: Classifieds - Parts
Topic: WTB 24 FORDOR R/R FENDER
Replies: 6
Views: 2555

WTB 24 FORDOR R/R FENDER

Looking for a right rear fender 24 four-door sedan
by ClockDoc
Wed Jul 29, 2020 9:40 pm
Forum: Classifieds - Parts
Topic: 48 year old collection of Model T Parts
Replies: 21
Views: 8945

Re: 48 year old collection of Model T Parts

Looking for a right rear fender for a 24 four-door sedan
by ClockDoc
Sun Feb 23, 2020 11:14 pm
Forum: Classifieds - Parts
Topic: F/S Master Rim Tool
Replies: 1
Views: 1705

Re: F/S Master Rim Tool

Please make reasonable offer and its yours!
by ClockDoc
Sun Feb 16, 2020 10:30 pm
Forum: Classifieds - Parts
Topic: F/S Master Rim Tool
Replies: 1
Views: 1705

F/S Master Rim Tool

Master Rim Tool $65.00 + shipping. Notice weld repair in photo's 1 & 2
#1
#1
#2
#2
#3
#3
#4
#4
by ClockDoc
Tue Feb 11, 2020 6:54 pm
Forum: Classifieds - Parts
Topic: AC Spark Plug Tester
Replies: 3
Views: 2066

Re: AC Spark Plug Tester

Sold to Dave! Pending payment.
Thanks MTFCA!😃
by ClockDoc
Tue Feb 11, 2020 12:03 pm
Forum: Classifieds - Parts
Topic: AC Spark Plug Tester
Replies: 3
Views: 2066

Re: AC Spark Plug Tester

More pictures
0A8CBDB5-2A64-4C16-B4DC-49B58B7951C8.jpeg
96C3D9CE-4408-4137-9584-D5203333B8B3.jpeg
by ClockDoc
Tue Feb 11, 2020 12:02 pm
Forum: Classifieds - Parts
Topic: AC Spark Plug Tester
Replies: 3
Views: 2066

AC Spark Plug Tester

AC spark plug indicator tester. You can test plugs under compression. Please see photos. Tester works but needs the power cord replaced as it is cracked and hard as a rock.
One thing I noticed does uses a KW coil to create the spark. $75 plus shipping.
9E56EA9C-7332-49C1-A806-1A978CBA23F6.jpeg
by ClockDoc
Sat Aug 17, 2019 1:35 pm
Forum: General Discussion Forum
Topic: What should this sell for?
Replies: 13
Views: 5374

Re: What should this sell for?

Gentlemen, Thank you for your input. I will pass this on to the owner.
by ClockDoc
Sat Aug 17, 2019 12:05 am
Forum: General Discussion Forum
Topic: What should this sell for?
Replies: 13
Views: 5374

Re: What should this sell for?

More pictures
by ClockDoc
Fri Aug 16, 2019 9:39 pm
Forum: General Discussion Forum
Topic: What should this sell for?
Replies: 13
Views: 5374

Re: What should this sell for?

More pictures
Sorry that they are sideways.
by ClockDoc
Fri Aug 16, 2019 9:37 pm
Forum: General Discussion Forum
Topic: What should this sell for?
Replies: 13
Views: 5374

What should this sell for?

I'm asking this for a friend in Wisconsin. Her husband has passed several years ago and she is considering selling this T. It hasn't run in the past couple of decades, but was driven in some local parades before it was parked in this pole barn. (the proverbial "ran when parked"). I don't know if she...
by ClockDoc
Wed Aug 07, 2019 3:33 pm
Forum: General Discussion Forum
Topic: What have you done to your T in August
Replies: 94
Views: 29196

Re: What have you done to your T in August

I got my rear fenders painted finally hopefully they will be on tomorrow :D
by ClockDoc
Sun Aug 04, 2019 1:33 am
Forum: General Discussion Forum
Topic: Ms Mary’s First Excursion
Replies: 2
Views: 1974

Ms Mary’s First Excursion

I took Ms Mary for a boat ride on the Harsen’s Island Ferry with two friends, then to lunch at the School House Grille. A fun trip! :D
https://youtu.be/UhvGx-H3R4Q
by ClockDoc
Wed Jul 31, 2019 11:07 pm
Forum: General Discussion Forum
Topic: Shout Out to Mike at Clastique
Replies: 4
Views: 2655

Re: Shout Out to Mike at Clastique

The one that was sent with the kit was not the correct length.
by ClockDoc
Tue Jul 30, 2019 11:29 pm
Forum: General Discussion Forum
Topic: Shout Out to Mike at Clastique
Replies: 4
Views: 2655

Shout Out to Mike at Clastique

I bought my Fordor in 2014, and was just planning on just getting it running. Maybe some new tires and a new interior and a general going over to spruce it up. Well...Here it is 5 years later after taking it down to just the floor, replacing a lot of wood, complete engine overhaul, new transmission ...
by ClockDoc
Tue Jul 23, 2019 8:04 pm
Forum: General Discussion Forum
Topic: Wiring harness location
Replies: 6
Views: 3187

Re: Wiring harness location

Do you have a picture you could post?
by ClockDoc
Sat Jul 20, 2019 5:23 pm
Forum: General Discussion Forum
Topic: Setting generator third brush
Replies: 4
Views: 2833

Setting generator third brush

I just rebuilt my generator and was wondering when I set the third brush do I hook the ammeter wire directly to the output post bypassing my fun projects regulator?
by ClockDoc
Thu Jul 11, 2019 1:27 pm
Forum: General Discussion Forum
Topic: Anyone know what these are for?
Replies: 2
Views: 2078

Anyone know what these are for?

I have these two covers that was in a pile of parts that I had. They measure 8“ x 4 1/2“ I don’t know of any T that would use them.
Are they even for an automobile?
If you have an idea what they might fit let me know.
by ClockDoc
Wed Jul 10, 2019 10:17 am
Forum: General Discussion Forum
Topic: Don Booth
Replies: 1
Views: 1594

Don Booth

I tried to search for Don Booth but it says his profile is deleted from the system. I’m getting ready to put my interior in my four-door and I could use some expert advice.
Does anyone know how to get in contact with him?
by ClockDoc
Sat Jul 06, 2019 2:54 pm
Forum: General Discussion Forum
Topic: It’s ALIVE
Replies: 2
Views: 1893

It’s ALIVE

After five years my 24 Fordor again is moving under its own power! HooRay went for a maiden voyage about a 1/2 mile around town. Starts and runs great. A big thanks to Joe Bell for my engine rebuild. (That Skat cranks sure is smooth). And a big thanks to all of the forum for answering my questions o...
by ClockDoc
Fri Jul 05, 2019 9:38 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in July?
Replies: 113
Views: 34614

Re: What have you done to your Model T in July?

It’s a fresh rebuild and a little too stiff to hand crank.
by ClockDoc
Fri Jul 05, 2019 12:19 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in July?
Replies: 113
Views: 34614

Re: What have you done to your Model T in July?

I’ve been doing a lot of small odd jobs on my Fordor. Today I got the battery installed, new wiring harnesses, finish rebuilding the starter, and put my headlights together. Tomorrow I’ll finish the steering column install. Waiting for the end of the bendix drive so I can get it running. It sounded ...
by ClockDoc
Thu Jul 04, 2019 10:31 pm
Forum: General Discussion Forum
Topic: Odds of getting stolen
Replies: 23
Views: 8245

Re: Odds of getting stolen

Thanks everyone, lots of good information passed down. Will definitely remove the motometer. Vandalism is another problem. I guess I’ll just take the obvious precautions and keep my insurance paid up.
by ClockDoc
Thu Jul 04, 2019 9:42 am
Forum: General Discussion Forum
Topic: Odds of getting stolen
Replies: 23
Views: 8245

Odds of getting stolen

Although my four-door is not quite ready for the road but it will be soon, I plan to drive the car quite a bit with overnight stays and I’m wondering how safe is the car in the hotel parking lot, has anyone had any experiences with the car being stolen or something?
by ClockDoc
Sat Jun 22, 2019 10:03 am
Forum: General Discussion Forum
Topic: What is this ford wrench for?
Replies: 4
Views: 2911

Re: What is this ford wrench for?

Thank you Mark, much appreciated.
by ClockDoc
Fri Jun 21, 2019 5:23 pm
Forum: General Discussion Forum
Topic: What is this ford wrench for?
Replies: 4
Views: 2911

What is this ford wrench for?

I’m wondering what this ford wrench is for? Has Ford script with U.S.A. on one side and the letter M on the other.
by ClockDoc
Wed May 22, 2019 8:47 am
Forum: General Discussion Forum
Topic: Generator Housing Hole
Replies: 3
Views: 2287

Re: Generator Housing Hole

Thank you Mark, I feel kind of dumb now because I forgot about removing the cut out from that generator.
Question answered, problem solved, what a great forum.
by ClockDoc
Wed May 22, 2019 12:41 am
Forum: General Discussion Forum
Topic: What are you doing with your "T" in May
Replies: 107
Views: 33098

Re: What are you doing with your "T" in May

I started to rebuild my generator but ran in to a problem right off the bat. I did not have the correct tool to remove the field pole screws and I made matters worse by using the same method as the last guy, a punch and hammer! IMG_8035.jpeg I did manage to get one loose, but the others would not bu...
by ClockDoc
Tue May 21, 2019 11:57 pm
Forum: General Discussion Forum
Topic: Generator Housing Hole
Replies: 3
Views: 2287

Generator Housing Hole

What are the threaded holes for? There is 1 hole by each field shoe screw.[image]
Gen Housing.jpeg
[/image]
I watched the Model T Tips video on Generator rebuilding, but these are not mentioned.
Any ideas?
by ClockDoc
Sat May 18, 2019 12:09 pm
Forum: General Discussion Forum
Topic: 6 volt voltage regulator
Replies: 7
Views: 3912

6 volt voltage regulator

Does anyone know if the Fun projects 6 volt regulators are available?
by ClockDoc
Fri Feb 22, 2019 11:10 pm
Forum: General Discussion Forum
Topic: Winfield Carburetor
Replies: 5
Views: 3213

Winfield Carburetor

I found this Winfield at an antique store and was wondering is this for a speedster and would be any interest in it? They were asking $375.00 None of the screws are buggered up and every thing is free. wuyTrUcaSMyvtWZCb3CnJw_thumb_abe2.jpg wkzAZghqQue1YRMYv3sdZA_thumb_abe1.jpg Screen Shot 2019-02-22...
by ClockDoc
Tue Jan 08, 2019 7:43 pm
Forum: Forum Support Questions
Topic: Video Requirements
Replies: 8
Views: 5081

Re: Video Requirements

My attempt at attaching a gif
by ClockDoc
Tue Jan 08, 2019 6:36 pm
Forum: Classifieds - Parts
Topic: FS- Over 100 parts,tools, mostly T.List available
Replies: 24
Views: 9676

Re: FS- Over 100 parts,tools, mostly T.List available

I would like a list please :roll: