Search found 234 matches

by Model T Mark
Mon Mar 25, 2024 8:39 pm
Forum: Classifieds - Parts
Topic: WTB 19-20 ignition switch
Replies: 0
Views: 111

WTB 19-20 ignition switch

I’m looking for a really good or perhaps a new old stock ignition switch with the heavy cast light switch handle. We are struggling with broken pot metal parts. This is the last part needed to complete the restoration of a high point show car. It’s a Canadian export to Australia. Any help would be g...
by Model T Mark
Tue Mar 05, 2024 8:20 pm
Forum: General Discussion Forum
Topic: Russ Potters Passing and Arrangements
Replies: 36
Views: 2233

Re: Russ Potters Passing and Arrangements

Lots of good times over the years with Russ on tours and at auctions all over the United States. Once you meant him he was a personality you would never forget. I’m better person for have been able to call him a friend. Rest in peace.
by Model T Mark
Tue Mar 05, 2024 8:15 pm
Forum: General Discussion Forum
Topic: Carb Identification
Replies: 3
Views: 320

Re: Carb Identification

1912 style Holley. One of three variations that ford used in 12.
by Model T Mark
Fri Feb 23, 2024 9:22 pm
Forum: General Discussion Forum
Topic: Upholstery pictures wanted open car 17-18 ish trim detail.
Replies: 0
Views: 215

Upholstery pictures wanted open car 17-18 ish trim detail.

Open car info needed. I’m looking for a picture of the card board panel especially where the windshield bolts pass through or around near the top on both sides of the body and how it should be trimmed. I didn’t have the originals and all my tack holes have been filled in the original wood. Any help ...
by Model T Mark
Sun Feb 11, 2024 3:57 pm
Forum: Classifieds - Parts
Topic: FS: E&J "Black & Brass" LH Side Light 1914
Replies: 5
Views: 312

Re: FS: E&J "Black & Brass" LH Side Light 1914

Not in my spam either. My direct email is meyre14t@yahoo.com thanks Mark Eyre
by Model T Mark
Sun Feb 11, 2024 3:01 pm
Forum: Classifieds - Parts
Topic: FS: E&J "Black & Brass" LH Side Light 1914
Replies: 5
Views: 312

Re: FS: E&J "Black & Brass" LH Side Light 1914

I have not received and email yet. I’ll check later this evening. Thanks Mark E.
by Model T Mark
Sun Feb 11, 2024 11:45 am
Forum: Classifieds - Parts
Topic: FS: E&J "Black & Brass" LH Side Light 1914
Replies: 5
Views: 312

Re: FS: E&J "Black & Brass" LH Side Light 1914

I would like to buy this lamp. Email me with address to send a check to with shipping to 49014 through this site. Thanks Mark Eyre
by Model T Mark
Wed Feb 07, 2024 5:49 pm
Forum: General Discussion Forum
Topic: Early vs late rear end carrier?
Replies: 6
Views: 529

Re: Early vs late rear end carrier?

The one with the studs is earlier. The late ones have bolts all the way through both sides.
by Model T Mark
Sun Feb 04, 2024 7:15 pm
Forum: General Discussion Forum
Topic: Kingston 6 Ball Carburetor-1912 Anyone Have Experience with this Carb?
Replies: 5
Views: 401

Re: Kingston 6 Ball Carburetor-1912 Anyone Have Experience with this Carb?

We run one on our 12 torpedo. Runs much like a 5 ball carb does but I think it starts better than the 5 ball does. There are a couple of variations of the six ball carb I have seen over the years. One has a bolt on the top of the body like an 11 Holley does.
IMG_1668.jpeg
by Model T Mark
Sat Jan 27, 2024 4:04 pm
Forum: Classifieds - Parts
Topic: WTB cast iron timer body
Replies: 0
Views: 168

WTB cast iron timer body

Looking for a cast iron timer good enough to lightly turn on a lathe and use. I have a nos heavy roller. Thanks
Mark Eyre contact me through the this sight using email pleas.
by Model T Mark
Thu Jan 18, 2024 1:04 pm
Forum: General Discussion Forum
Topic: Old Car Festival, 1982 and 2004.
Replies: 19
Views: 1221

Re: Old Car Festival, 1982.

I rode in it there, my dad and I were restoring our Model N at that time and he took and interest in a 12 year old kid that was really I interested in the real old stuff. He was a fine gentleman. I’m missing these older guys more than ever these days and the hobby isn’t the same without them. The on...
by Model T Mark
Wed Jan 17, 2024 2:15 pm
Forum: General Discussion Forum
Topic: Old Car Festival, 1982 and 2004.
Replies: 19
Views: 1221

Re: Old Car Festival, 1982.

Maybe Larry Oneal. It was a long time go and I was 12. Don’t quote me though .
by Model T Mark
Sun Dec 31, 2023 7:03 pm
Forum: Classifieds - Parts
Topic: 30x3 non demountable Mclearn wire wheels for sale
Replies: 0
Views: 306

30x3 non demountable Mclearn wire wheels for sale

Two 30x3 non demountable wire wheels new never run. Powder coated in cream. Complete with hub caps spacers studs and acorn nuts. They have had tires mounted on them and they have been removed. 1500.00 plus the ride they belong to a client. Mark Eyre 269-719-seven-five-four-two
by Model T Mark
Mon Nov 20, 2023 1:41 pm
Forum: Classifieds - Parts
Topic: FS Touring Top Sockets 1918-22
Replies: 5
Views: 302

Re: FS Touring Top Sockets

Stopped oval sockets mid 18. They are two man touring 18-22. Exactly like the ones on my 18.
by Model T Mark
Sat Nov 18, 2023 5:34 pm
Forum: General Discussion Forum
Topic: What did you do to your Model T in November?
Replies: 52
Views: 3615

Re: What did you do to your Model T in November?

Stripped and painted a late 27 touring.
by Model T Mark
Fri Nov 10, 2023 6:34 pm
Forum: General Discussion Forum
Topic: who does babbit in starter snout?
Replies: 22
Views: 1376

Re: who does babbit in starter snout?

David Woods does the same he could help you also. He follows the forum some. His forum name is Woody.
by Model T Mark
Tue Oct 31, 2023 9:24 pm
Forum: General Discussion Forum
Topic: Wood parts conundrum
Replies: 3
Views: 310

Re: Wood parts conundrum

It is a 26-27 touring car kit.
by Model T Mark
Thu Oct 12, 2023 12:12 pm
Forum: Classifieds - Parts
Topic: 14-15 brake anti-rattlers fs. Sold
Replies: 1
Views: 197

Re: 14-15 brake anti-rattlers fs

I’ll take them all at 13 each. Need shipping to 49014 and how to pay you.
by Model T Mark
Sun Sep 17, 2023 11:57 am
Forum: General Discussion Forum
Topic: What have you done to your Model T in September?
Replies: 45
Views: 2975

Re: What have you done to your Model T in September?

Painted this Friday. 18 touring it was a burned body sometime in its life.
by Model T Mark
Fri Sep 08, 2023 9:59 am
Forum: General Discussion Forum
Topic: Steve Jelf in bad accident
Replies: 266
Views: 24662

Re: Steve Jelf in bad accident

Dang, hope Steve gets well soon. I don’t know him well but supplied a part a few years ago when he was on his way to the OCF. I’m about an hour north of Ft Wayne and know the area well. Don’t hesitate to let me know if I can be of any help. Scary thing is this could be anyone of us. Be careful out t...
by Model T Mark
Sat Aug 19, 2023 3:30 pm
Forum: Classifieds - Parts
Topic: WTB tin cover over rear seat
Replies: 0
Views: 214

WTB tin cover over rear seat

Wtb one tin cover for a 17 -18 touring tear seat compartment. This is the panel under the seat cushion that is hinged. This is for a 17-18 touring that is being restored with 100% of its ford sheetmetal.
Thanks Adam Eyre email this ad and my dad with get it thanks.
by Model T Mark
Wed Aug 09, 2023 11:50 am
Forum: Classifieds - Parts
Topic: FS 1913 REAR BODY SIL SUPPORT BRACKET SET (NOS)
Replies: 6
Views: 567

Re: FS 1913 REAR BODY SIL SUPPORT BRACKET SET (NOS)

They are going to go on an early 13 touring I bought a winter ago. It is in the serial number 192xxx range. It has the narrow sills on it and doesn’t have the reinforcement brackets already in it. I’ll also put the two rivet frame bracket on it also the later 13 have if I can ever find a set.
by Model T Mark
Tue Aug 08, 2023 8:00 pm
Forum: Classifieds - Parts
Topic: FS 1913 REAR BODY SIL SUPPORT BRACKET SET (NOS)
Replies: 6
Views: 567

Re: FS 1913 REAR BODY SIL SUPPORT BRACKET SET (NOS)

We will take them if still available. Mark and Phil Eyre contact me through email. Let me know including shipping to 49014
by Model T Mark
Tue Aug 01, 2023 9:44 pm
Forum: General Discussion Forum
Topic: What am I looking at. Says 1925.
Replies: 5
Views: 505

Re: What am I looking at. Says 1925.

I have seen it I live about 5 miles from there call me. Mark Eyre email me through this site and I’ll share my phone number.
by Model T Mark
Mon Jul 24, 2023 11:54 am
Forum: Classifieds - Parts
Topic: McLaren wire wheels for sale
Replies: 1
Views: 587

Re: McLaren wire wheels for sale

Price drop 1500.00
by Model T Mark
Sun Jul 23, 2023 8:50 pm
Forum: Classifieds - Parts
Topic: McLaren wire wheels for sale
Replies: 1
Views: 587

McLaren wire wheels for sale

One pair of McLaren wire wheels non demountable 30x3 powder coated cream hub caps, spacers and acorn nuts. New never used on the road they have had tires mounted on them. 1600.00 plus the ride. Contact me though this website if interested.
Mark Eyre
by Model T Mark
Tue Jun 13, 2023 3:41 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in June?
Replies: 51
Views: 4555

Re: What have you done to your Model T in June?

A strip, bodywork and paint job on a customers 14 roadster.
by Model T Mark
Thu Jun 08, 2023 8:20 pm
Forum: Classifieds - Parts
Topic: FS original pair of 1910 running boards
Replies: 2
Views: 484

Re: FS original pair of 1910 running boards

I’ll take them Kim Phil and Mark Eyre get me a shipping price to 49014.
by Model T Mark
Thu Jun 08, 2023 8:17 pm
Forum: Classifieds - Parts
Topic: FS original pair of 1910 running boards
Replies: 2
Views: 484

Re: FS original pair of 1910 running boards

I’ll take them Kim Phil and Mark Eyre get me a shipping price to 49014.
by Model T Mark
Fri Jun 02, 2023 9:16 pm
Forum: General Discussion Forum
Topic: Broken Crank Club
Replies: 15
Views: 1490

Re: Broken Crank Club

I joined 22 years ago, not fun! Hang in there!
by Model T Mark
Fri May 26, 2023 3:44 pm
Forum: Classifieds - Parts
Topic: of stromberg for sale picture included
Replies: 2
Views: 495

Re: of stromberg for sale picture included

Funny. So many people want me to send them a picture I just thought I would post it here. I haven’t tried running it. I took it in as partial payment on some work I did for a gentleman.I have had it for sale for awhile now.
by Model T Mark
Fri May 26, 2023 1:55 pm
Forum: Classifieds - Parts
Topic: of stromberg for sale picture included
Replies: 2
Views: 495

of stromberg for sale picture included

OF stromberg for sale. 450.00.
meyre14t@yahoo.com
A53A7EA1-BFEF-4589-B6A7-35AA93A4672C.jpeg
by Model T Mark
Sun May 21, 2023 9:43 pm
Forum: Classifieds - Parts
Topic: Of Stromberf Carburetor for sale
Replies: 2
Views: 621

Re: Of Stromberf Carburetor for sale

It is complete I will email a picture if you email me first because I can never get photos to post here.
by Model T Mark
Sat May 20, 2023 1:55 pm
Forum: Classifieds - Vehicles
Topic: 1915 Model T Runabout for Sale - SOLD
Replies: 8
Views: 3378

Re: 1915 Model T Runabout for Sale

Still looks awesome, Mark!!!!
by Model T Mark
Sat May 20, 2023 11:43 am
Forum: Classifieds - Parts
Topic: FS Original Rust Free 1913 Touring body
Replies: 3
Views: 947

Re: FS Original Rust Free 1913 Touring body

Please send me a picture or two when you get a chance. Mark Eyre meyre14t@yahoo.com
by Model T Mark
Thu May 18, 2023 5:02 pm
Forum: Classifieds - Parts
Topic: 1913/14 rear fenders for sale
Replies: 3
Views: 540

Re: 1913/14 rear fenders for sale

Sold pending funds.
by Model T Mark
Thu May 18, 2023 12:20 pm
Forum: Classifieds - Parts
Topic: For sale 26/27 Rocky Mountain Brakes
Replies: 1
Views: 518

Re: For sale 26/27 Rocky Mountain Brakes

Sold pending funds
by Model T Mark
Wed May 17, 2023 9:39 am
Forum: Classifieds - Parts
Topic: 30x3 non demountable McLaren Wire wheels for sale.
Replies: 0
Views: 440

30x3 non demountable McLaren Wire wheels for sale.

One pair of 30 x3 Non demountable McLaren wire wheels for sale. Complete with acorn nuts studs and hub caps . New never used. powder coated straw. 1500.00 the pair plus shipping.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Wed May 17, 2023 8:12 am
Forum: Classifieds - Parts
Topic: Of Stromberf Carburetor for sale
Replies: 2
Views: 621

Of Stromberf Carburetor for sale

Of stromberg carburetor for sale. Took it in as partial payment for work I had completed. Nice patina no rust on any components carberatior. $450.00 plus actual shipping.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Wed May 17, 2023 8:03 am
Forum: Classifieds - Parts
Topic: For sale 13/14 John Brown headlamp
Replies: 0
Views: 309

For sale 13/14 John Brown headlamp

Decent Black and brass headlamp. Decent brass. Mirror has a chipped edge. Missing burner but has stand. Took it in as partial payment for rebuilding a rearend. 225.00 plus shipping.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Wed May 17, 2023 7:50 am
Forum: Classifieds - Parts
Topic: 1913/14 rear fenders for sale
Replies: 3
Views: 540

1913/14 rear fenders for sale

One pair of 1913/14 rear fenders new still in Rootlieb’s box. Never opened. Just bought a complete set. No longer have a use for them as they are extras. 725.00 plus shipping. New cost 410.00 each.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Wed May 17, 2023 7:42 am
Forum: Classifieds - Parts
Topic: For sale 26/27 Rocky Mountain Brakes
Replies: 1
Views: 518

For sale 26/27 Rocky Mountain Brakes

One pair of 26-27 Rocky Mountain brakes. New never used still in box. Just the part that bolts to the rear axle. No rods or equalizer. 450.00 plus actual shipping.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Thu May 04, 2023 5:17 pm
Forum: General Discussion Forum
Topic: Nickel plating
Replies: 14
Views: 1605

Re: Nickel plating

Qual Khrom in Erie Pa does fabulous nickel plating. They are a restoration shop so they are familiar with the process. Good work is expensive but make a restoration or break a restoration in my opinion.
by Model T Mark
Tue Apr 25, 2023 6:10 am
Forum: Classifieds - Parts
Topic: FS model T coils and Colpin Mag charger
Replies: 9
Views: 1280

Re: FS model T coils and Colpin Mag charger

My dad and I would like to purchase the three other 1909 coils please email me on how to pay you. Mark and Phil Eyre
by Model T Mark
Sun Apr 23, 2023 4:41 pm
Forum: General Discussion Forum
Topic: Centari Paint
Replies: 4
Views: 562

Re: Centari Paint

A Good substitute is Nason Fulthane single stage urethane. It has a lot of the same properties of Centari. Dries hard and is easy to buff if needed. Just my opinion and know you didn’t ask. Just trying to offer an alternative.
by Model T Mark
Fri Apr 21, 2023 6:32 pm
Forum: General Discussion Forum
Topic: The Time Machine
Replies: 117
Views: 13519

Re: The Time Machine

I have had good luck v-ing it out slightly and get it clean. Use 50/50 solder and a good flux. Solder it using an iron not a torch. It’s not under pressure and will last a long time till you decided to have it welded or stitched. Sorry if I spelled anything i correctly I’m getting used to new glasses.
by Model T Mark
Mon Mar 27, 2023 7:32 pm
Forum: Classifieds - Parts
Topic: WTB 18-22 top irons roadster two man type
Replies: 1
Views: 328

Re: WTB 18-22 top irons roadster two man type

Found! Less than 24 hours thank you Russ!
by Model T Mark
Sun Mar 26, 2023 7:38 pm
Forum: Classifieds - Parts
Topic: WTB 18-22 top irons roadster two man type
Replies: 1
Views: 328

WTB 18-22 top irons roadster two man type

Looking to buy top irons square type for my son’s new to him 22 roadster. Trying to find a set to match a patina car. They are the two man variety. New would be acceptable if you purchased a set and have changed direction. Mark Eyre, Email meyre14t@yahoo.com.
by Model T Mark
Tue Jan 31, 2023 1:49 pm
Forum: Classifieds - Parts
Topic: Wtd side lamp bracket like pictured
Replies: 0
Views: 406

Wtd side lamp bracket like pictured

Wanted 1 side lamp bracket like pictured. meyre14t@yahoo.com
by Model T Mark
Wed Jan 18, 2023 6:23 pm
Forum: General Discussion Forum
Topic: Jan-Feb Model T times includes Tour registration form
Replies: 4
Views: 621

Re: Jan-Feb Model T times includes Tour registration form

I restored that 20 pick up over the past two years. I regret that they didn’t put a picture of the generator assembly in the Model T Times article.
Mark
by Model T Mark
Sun Dec 11, 2022 1:34 pm
Forum: General Discussion Forum
Topic: Intro and my TT project
Replies: 57
Views: 6502

Re: Intro and my project

I’m down state if you need any parts for your project. Contact me via this forum and I would be glad to help if I can.
Mark Eyre
by Model T Mark
Sat Dec 03, 2022 8:47 pm
Forum: General Discussion Forum
Topic: 17-18 Coupelet mystery
Replies: 9
Views: 1203

Re: 17-18 Coupelet mystery

It was on a 21 chassis. I have the original frame. It doesn’t have the holes for a carrier. The gentleman I purchased it from was going to build a rat rod out of it. I have the body and the frame and the title. It originally was an 18.
by Model T Mark
Sat Dec 03, 2022 7:36 pm
Forum: General Discussion Forum
Topic: 17-18 Coupelet mystery
Replies: 9
Views: 1203

Re: 17-18 Coupelet mystery

It has removable center posts. I will restore it eventually. I’m missing the side lamp brackets that have 4 countersunk screws that hold them to the body. I have seen it on two different Ford documents one calling it a Coupe and the other calling it a Couplet. Thoughts on which it is exactly? I can’...
by Model T Mark
Sat Nov 12, 2022 9:12 am
Forum: Classifieds - Parts
Topic: For sale reversed eye front and rear main leaf spring
Replies: 3
Views: 744

Re: For sale reversed eye front and rear main leaf spring

Ken my email is meyre14t@yahoo.com

Send me your zip code and I’ll get a shipping est Monday.
by Model T Mark
Fri Nov 11, 2022 7:42 pm
Forum: Classifieds - Parts
Topic: For sale reversed eye front and rear main leaf spring
Replies: 3
Views: 744

For sale reversed eye front and rear main leaf spring

Built for speedster by Travis Cook one rear reversed eye main leaf and one reversed eye main front leaf. In epoxy primer new never used. Decided to lower the chassis an alternate way. 100.00 each plus actually shipping. Mark Eyre
by Model T Mark
Sat Oct 15, 2022 8:09 pm
Forum: General Discussion Forum
Topic: Very Late '13 Body
Replies: 14
Views: 1778

Re: Very Late '13 Body

I restored one a few years ago that had the late 13 rear crossmember and a 13 style body with reinforcement and 14 style rear door latches. It was a feature article in the Model T Times about 5 years ago. It had the metal flat top coil box. Body was a 13 style with the long doors. I can’t remember t...
by Model T Mark
Sun Sep 25, 2022 6:36 pm
Forum: Classifieds - Parts
Topic: FS EARLY IGNITION SWITCH AND AMMETER
Replies: 6
Views: 1019

Re: FS EARLY IGNITION SWITCH AND AMMETER

I would like to purchase the switch. Email me your contact at meyre14t@yahoo.com
by Model T Mark
Mon Sep 19, 2022 10:37 am
Forum: General Discussion Forum
Topic: Eyre '17 Touring
Replies: 4
Views: 1061

Re: Eyre '17 Touring

The interior top and tires were replaced about 25 years ago as far as we can tell. Engine looks to never have been out still has all its cotter pins and engine pans installed. No wear on either the spark or throttle side of the quadrant. Starts easily cold on the mag to which is a bonus. I did have ...
by Model T Mark
Sat Sep 17, 2022 5:47 pm
Forum: General Discussion Forum
Topic: Rare model T brass carb?
Replies: 10
Views: 1574

Re: Rare model T brass carb?

If you can post that picture here in the forum please feel free to do so. I couldn’t figure it out for some reason or another.
Mark Eyre
by Model T Mark
Sat Sep 17, 2022 12:32 pm
Forum: General Discussion Forum
Topic: Rare model T brass carb?
Replies: 10
Views: 1574

Re: Rare model T brass carb?

Picture of our Kingston carb. I can’t get the photo to load . Email me at meyre14t@yahoo.com and I’ll email it to you.
by Model T Mark
Fri Sep 16, 2022 8:57 pm
Forum: General Discussion Forum
Topic: Rare model T brass carb?
Replies: 10
Views: 1574

Re: Rare model T brass carb?

I’ll post a picture of it tomorrow. Cecil Church had one with out the nut and a ball under it and he called it Canadian and then ours showed up on the car, I had Russ Potter restore it and he called it a 7 ball and said he had never seen one exactly like your example and mine. I since have seen one ...
by Model T Mark
Fri Sep 16, 2022 7:40 pm
Forum: General Discussion Forum
Topic: Rare model T brass carb?
Replies: 10
Views: 1574

Re: Rare model T brass carb?

We have one just like it on our 12 Torpedo. It’s serial number 145xxx and it came out of the Barney Pollard collection years ago. I restored it runs great. I’m have always wondered why the Kingston carb for 12 isn’t really listed anywhere…..
by Model T Mark
Mon Sep 12, 2022 9:56 pm
Forum: Classifieds - Parts
Topic: WTB Dimmer
Replies: 2
Views: 604

Re: WTB Dimmer

Yes I need one for my car this is just a picture I had to go by.
by Model T Mark
Mon Sep 12, 2022 8:28 pm
Forum: General Discussion Forum
Topic: Preserve an original finish help needed
Replies: 21
Views: 2284

Re: Preserve an original finish help needed

So the funny thing how this car came about my dad had a decent original 18 he gave to my son to restore. We got to thinking it would be fun to have an unrestored example and a restored example of the same car. Here is where we are on the restoration of the early 18 touring. The one he bought at the ...
by Model T Mark
Mon Sep 12, 2022 8:19 pm
Forum: General Discussion Forum
Topic: Preserve an original finish help needed
Replies: 21
Views: 2284

Re: Preserve an original finish help needed

Thanks everyone I have a good idea of the job ahead now. Washing it tomorrow is job 1.
by Model T Mark
Mon Sep 12, 2022 7:19 pm
Forum: Classifieds - Parts
Topic: WTB Dimmer
Replies: 2
Views: 604

WTB Dimmer

We are in need of a dimmer that screws to a wooden firewall on an 18. This is for a car currently under restoration. A picture of what is needed is included in this post. Adam Eyre ajeyre13@icloud.com
996936E1-F723-4D84-8C69-8EF25854B180.jpeg
by Model T Mark
Mon Sep 12, 2022 7:08 pm
Forum: General Discussion Forum
Topic: Preserve an original finish help needed
Replies: 21
Views: 2284

Preserve an original finish help needed

So my dad and I picked this up this weekend. An 18 touring in almost an original state. How should we preserve the finish on this car? We will keep it original. Suggestions would be greatly appreciated. I restore cars and this is a new one on me. Thanks Mark Eyre 52F810EF-5F59-4552-9817-8B7228B44B57...
by Model T Mark
Mon Sep 05, 2022 4:26 pm
Forum: Classifieds - Parts
Topic: WTB cast iron hot air pipe
Replies: 28
Views: 4214

Re: WTB cast iron hot air pipe

Hi Dan,
My dad and I would each take one. Mark and Phil Eyre
So that would be 2 if available.

meyre14t@yahoo.com
269-719-7542
by Model T Mark
Mon Aug 15, 2022 7:19 am
Forum: General Discussion Forum
Topic: Michigan Model T Jamboree 2023
Replies: 3
Views: 1170

Re: Michigan Model T Jamboree 2023

We don’t yet till we lock down a hotel. It will either be the end of the second week or the end of the third week of August 2023z
by Model T Mark
Sat Aug 13, 2022 8:20 pm
Forum: General Discussion Forum
Topic: Michigan Model T Jamboree 2023
Replies: 3
Views: 1170

Michigan Model T Jamboree 2023

Next year’s Michigan Jamboree will be in Coldwater, MI with the Eyre and Petch families hosting (Boilin Ts). Thanks for an awesome for an awesome 2022 Jamboree!!!
by Model T Mark
Wed Aug 03, 2022 7:05 pm
Forum: General Discussion Forum
Topic: Hand cranking
Replies: 50
Views: 4988

Re: Hand cranking

Unfortunately, we get distracted and in my case I got lazy. I’m going to go with accidents happen. I feel for you Jeff I’m about 18 months from breaking my shoulder my advice is do what the doctors tell you and if you have to do rehab take it seriously. I’m only about 85% from where I was prior to b...
by Model T Mark
Sat Jul 09, 2022 3:45 pm
Forum: General Discussion Forum
Topic: 1913 Runabout with side curtains
Replies: 17
Views: 2673

Re: 1913 Runabout with side curtains

I’m going to say 13 because of the extra bead on the bottoms of the body tub.
by Model T Mark
Fri Jul 01, 2022 2:11 pm
Forum: Classifieds - Parts
Topic: WTB 17-23 low radiator hood shelves
Replies: 5
Views: 788

Re: WTB 17-23 low radiator hood shelves

Thanks, I hadn’t looked far enough down. I’ll pass it on to the gentleman looking for them.
Mark
by Model T Mark
Thu Jun 30, 2022 8:21 pm
Forum: Classifieds - Parts
Topic: WTB 17-23 low radiator hood shelves
Replies: 5
Views: 788

WTB 17-23 low radiator hood shelves

Need a pair of 17-23 low radiator hood shelves. Not looking for perfect. just good enough to straighten out and fill and paint. Looking to help a friend.
meyre14t@yahoo.com
by Model T Mark
Sat Jun 18, 2022 7:30 pm
Forum: Classifieds - Parts
Topic: F S 10 tooth pinion
Replies: 6
Views: 1322

Re: F S 10 tooth pinion

I’ll take it email me at meyre14t@yahoo.com and I’ll give you my zip code for shipping and please give me a total.
Mark
by Model T Mark
Tue Jun 14, 2022 8:08 pm
Forum: General Discussion Forum
Topic: Anyone know where I am or the number of this 09 2 pedal T?
Replies: 7
Views: 1764

Re: Anyone know where I am or the number of this 09 2 pedal T?

The Henry Ford. I knew Jack Scaff who found that for them many years ago.
by Model T Mark
Sun Feb 20, 2022 4:25 pm
Forum: General Discussion Forum
Topic: New Member wanna B
Replies: 23
Views: 2902

Re: New Member wanna B

Be very careful what you buy as a torpedo roadster one in their correct form demand top dollars. I probably looks at 15 to 20 of them in the 80s before I settled on a complete correct restoration project. I looked at a lot of very nice copy cat cars during that period. Take someone who knows them wi...
by Model T Mark
Sat Feb 19, 2022 7:13 pm
Forum: General Discussion Forum
Topic: 1913 body braces
Replies: 21
Views: 3191

Re: 1913 body braces

I would be interested in a set I think.
Mark Eyre meyre14t@yahoo.com
by Model T Mark
Sat Feb 12, 2022 9:10 pm
Forum: General Discussion Forum
Topic: Painting new wood wheels
Replies: 10
Views: 1957

Re: Painting new wood wheels

I mix a quart at a time. I thin it just a tiny bit so it soaks into the open grain of the wood nicely so the high build primer doesn’t soak in as much. It is compatible with the primer so that is the way I do it.
by Model T Mark
Sat Feb 12, 2022 8:11 pm
Forum: General Discussion Forum
Topic: Painting new wood wheels
Replies: 10
Views: 1957

Re: Painting new wood wheels

Use a PPG product called DP 40LF epoxy primer. Thin with Lacquer thinner about but 1/8 of a cup or so after mixing with hardner. Let completely dry scuff and spray with a high build urethane primer sand and paint. I have painted dozens of set of new wood wheels in the past 25 years many still look a...
by Model T Mark
Sat Jan 29, 2022 10:26 am
Forum: Classifieds - Parts
Topic: FS single twist brass horn
Replies: 4
Views: 1319

Re: FS single twist brass horn

Still waiting for an email.
Mark
by Model T Mark
Tue Jan 25, 2022 7:06 pm
Forum: Classifieds - Parts
Topic: FS single twist brass horn
Replies: 4
Views: 1319

Re: FS single twist brass horn

Email me on how to pay you. Mark
by Model T Mark
Tue Jan 25, 2022 5:13 pm
Forum: Classifieds - Parts
Topic: FS single twist brass horn
Replies: 4
Views: 1319

Re: FS single twist brass horn

I would like to purchase that if the base and tight where it attaches to the firewall. Mark Eyre meyre14t@yahoo.com shipping to 49014. Thanks!
by Model T Mark
Thu Jan 20, 2022 6:06 pm
Forum: General Discussion Forum
Topic: 1913 body braces
Replies: 21
Views: 3191

Re: 1913 body braces

I need a pair. There are two widths of sills if I remember correctly.
by Model T Mark
Tue Jan 18, 2022 5:30 am
Forum: General Discussion Forum
Topic: 13 touring
Replies: 13
Views: 2105

Re: 13 touring

North West side of Battle Creek.
by Model T Mark
Mon Jan 17, 2022 8:28 pm
Forum: General Discussion Forum
Topic: 13 touring
Replies: 13
Views: 2105

Re: 13 touring

I know it’s from Virginia probably sold new there from what the previous own said. The last time it was run was sometime in the early seventies. I wish I would have taken a picture of the barn we took it out of. There was a bunch of 55 chevys parked in front of it. All of which had flat tires and br...
by Model T Mark
Mon Jan 17, 2022 8:02 pm
Forum: General Discussion Forum
Topic: 13 touring
Replies: 13
Views: 2105

Re: 13 touring

Correct that is not core.
by Model T Mark
Mon Jan 17, 2022 7:59 pm
Forum: General Discussion Forum
Topic: 13 touring
Replies: 13
Views: 2105

Re: 13 touring

It has 5 lug demountable wood fellow accessory wheels on in with a spare rim which I’ll keep on it. It doesn’t have the reinforcement on it wish it did. It has a later block in it but I have a spare. The passenger front fender is a 15. Has gnarled spark and throttle rods and a large patent plate dad...
by Model T Mark
Mon Jan 17, 2022 6:28 pm
Forum: General Discussion Forum
Topic: 13 touring
Replies: 13
Views: 2105

13 touring

New to me 13 touring
7CDD2157-5916-485D-9141-D40A46E09EB9.jpeg
by Model T Mark
Mon Dec 27, 2021 7:13 pm
Forum: General Discussion Forum
Topic: Built From Scratch Model T's
Replies: 39
Views: 4733

Re: Built From Scratch Model T's

Correction Parts. Phone is just too hard to see these day.
by Model T Mark
Mon Dec 27, 2021 6:53 pm
Forum: General Discussion Forum
Topic: Built From Scratch Model T's
Replies: 39
Views: 4733

Re: Built From Scratch Model T's

I have a 1926 roaster build from pats in 1993 that won First Junior and Senior that next year. Still have it and it’s currently on its third set of tires and second crank shaft.
by Model T Mark
Mon Dec 13, 2021 5:47 pm
Forum: Classifieds - Parts
Topic: SOLD!! 1912-1913 Brass Jno. Brown 19 Headlight CHEAP!!
Replies: 12
Views: 3325

Re: For Sale: 1912-1913 All Brass Jno. Brown Model 19 Headlight

I have backs spun like 50 of them made up if anyone needs one. I need two and 50 was the smallest quantity I could have done.
by Model T Mark
Sat Dec 11, 2021 4:47 pm
Forum: General Discussion Forum
Topic: Eyre 11 Torpedo done today
Replies: 38
Views: 6834

Re: Eyre 11 Torpedo done today

Eric takes good pictures and thanks for the kind words. We had a good Summer of car shows. Alway fun to show a new restoration. Still need to make it more drivable it so stinking tight yet……
by Model T Mark
Fri Dec 10, 2021 9:40 pm
Forum: General Discussion Forum
Topic: 1910 Roadster body info needed.
Replies: 4
Views: 1243

Re: 1910 Roadster body info needed.

I have an 11 commercial roadster in Battle Creek Michigan if you want to come and make a cardboard pattern. Mel Miller had 11-12 iron clad body plans at one time. Mark Eyre
by Model T Mark
Tue Nov 30, 2021 4:20 pm
Forum: General Discussion Forum
Topic: Kingston B1 gasifier regenerator
Replies: 7
Views: 1753

Re: Kingston B1 gasifier regenerator

I have run these for years on a 26 roadster and have about 6 of them now. They tend to find me. I paid 125.00 for a nice straight early take off one that you could bolt on an use with new gaskets. I bought a Russ Potter rebuild some years ago for 500.00 and was happy with the price though it was a l...
by Model T Mark
Thu Nov 25, 2021 1:10 pm
Forum: Classifieds - Parts
Topic: WTB: Complete Speedster Body Kit
Replies: 14
Views: 2786

Re: WTB: Complete Speedster Body Kit

Just like the body Tom build for my son. I trimmed ours in aluminum and painted it body color. Ours is on a 15 chassis and has car production fenders on it. I have a trunk and a 11 torpedo tank.
by Model T Mark
Thu Nov 25, 2021 11:04 am
Forum: Classifieds - Parts
Topic: WTB: Complete Speedster Body Kit
Replies: 14
Views: 2786

Re: WTB: Complete Speedster Body Kit

Tom Butterworth who is a poster here used to live in Michigan is the builder of what I would consider one of the best speedster bodies around. He now is in Florida. Try contacting him here for speedster advice. I have two of his and couldn’t be happier.