Search found 37 matches
- Sat Apr 08, 2023 6:46 pm
- Forum: General Discussion Forum
- Topic: Morton and Brett speedster build
- Replies: 59
- Views: 5650
Re: Morton and Brett Radiator
There is a fiberglass mold for a Morton & Brett body here in Portland, Oregon, at least I think it is still here. Not sure of the status on it, but as far as I know it was last used 20+ years ago. Made a nice body, hand laid, and looked good. Not too many people doing hand laid fiberglass on the sca...
- Wed Apr 05, 2023 6:56 pm
- Forum: Classifieds - Parts
- Topic: RUCKSTELL BOOK, HALF PRICE
- Replies: 28
- Views: 2817
Re: RUCKSTELL BOOK, HALF PRICE
Just got Herb's book on Ruckstell. What fun! Lots of interesting background on how the Ruckstell axle came to be, was produced, and ultimately was the basis for future 2-speed axle setups. Insights also on Grover's background, career, work with the Ruckstell axle and what businesses he was involved ...
- Tue Mar 21, 2023 7:19 pm
- Forum: Classifieds - Parts
- Topic: RUCKSTELL BOOK, HALF PRICE
- Replies: 28
- Views: 2817
Re: RUCKSTELL BOOK, HALF PRICE
Hi Herb- I would like to buy one copy of the Ruckstell book. Please advise how you prefer to receive payment. Thx / Tim Knapp, Wilsonville, Oregon
- Sat Jun 04, 2022 6:15 pm
- Forum: General Discussion Forum
- Topic: Axle Gears
- Replies: 24
- Views: 2588
Re: Axle Gears
I generally agree with the process that most all postings give. I did do a couple of things differently. I have a 12 ton Harbor Freight press, which I modified with spacers to tighten against, around the bolts in the top and bottom of the frame, and brazed in shims in the cross slide to get a tighte...
- Thu Jun 02, 2022 4:32 pm
- Forum: General Discussion Forum
- Topic: Accessory Brakes with Double Drum- Any Info?
- Replies: 6
- Views: 1272
Accessory Brakes with Double Drum- Any Info?
I was able to acquire these outside accessory brakes a few years ago, and finally got to taking them apart to see what they look like. The double drum is cast as a single piece, with the Ford size inside drum and the 10" outside drum. They seem to have little wear, but also appear to have been insta...
- Sat Mar 05, 2022 4:47 pm
- Forum: General Discussion Forum
- Topic: Rajo B carburetor selection
- Replies: 39
- Views: 3454
Re: Rajo B carburetor selection
I am interested that Ed Archer indicates he runs a Zenith L-6 on his #2 car. I have checked out a couple of L-6's, and the main throat diameter measures 1.660". I have thought that likely is too much for most Model T motors, though I also recall reading somewhere that the Indianapolis car in 1923(?)...
- Sat Feb 12, 2022 11:19 pm
- Forum: General Discussion Forum
- Topic: Mystery wheels
- Replies: 11
- Views: 1943
Re: Mystery wheels
Ah....With the drive pin dome covers, I believe they are "3-pin Hayes". I have several with the hubs and hubcaps, showing the Hayes I.D. / Tim
- Fri Feb 11, 2022 1:17 am
- Forum: General Discussion Forum
- Topic: Ruckstell Housing Variations?
- Replies: 7
- Views: 1284
Re: Ruckstell Housing Variations?
And after Eaton took over, did they make Ruckstell housings with the pre-1926 small drum backing plates, as well as the later '26-'27 large drum version?
- Fri Feb 11, 2022 12:45 am
- Forum: General Discussion Forum
- Topic: Ruckstell Housing Variations?
- Replies: 7
- Views: 1284
Re: Ruckstell Housing Variations?
OK, so someone may have added the drain plug, as both you Steve and Kevin suggest. I do see that the "non-rib" housing does have a flat place in the location where a drain plug would be, though not drilled. Kevin, do your Eaton/Ruckstell '26-'27 housings also have the shape to accept the earlier "cl...
- Thu Feb 10, 2022 10:03 pm
- Forum: General Discussion Forum
- Topic: Ruckstell Housing Variations?
- Replies: 7
- Views: 1284
Ruckstell Housing Variations?
I am working with rebuilding two Ruckstells. One came as a complete assembly, after some 60 or 80 years out behind a barn along the Willamette River, with a slightly bent backing plate, and an original Ruckstell I.D.plate. It has a typical late 'teens/early '20's backing plate and is made for an "op...
- Sat Jan 29, 2022 12:58 am
- Forum: General Discussion Forum
- Topic: 'Speedster - lower or not, period accessories.
- Replies: 216
- Views: 20650
Re: 'Speedster - photos and thoughts on lowering or not
Take a look at the NW Vintage Speedsters website. At the top of the home page is a series of all the individual pages on the site. The "Lawrence O. Hughes Auto Racing Photo Collection" is the page you want. This collection of photos is from the midwest county fair racing circuit around Nebraska and ...
- Fri Dec 31, 2021 1:00 am
- Forum: Classifieds - Parts
- Topic: SOLD NOS GAS PEDAL ASSEMBLY AND LINKAGE
- Replies: 6
- Views: 1556
Re: SOLD NOS GAS PEDAL ASSEMBLY AND LINKAGE
Any chance someone (maybe Richard ?) will post a copy of the instruction sheet? I have seen a couple of these but have not understood the special features. Thx / Tim
- Wed Nov 24, 2021 9:05 pm
- Forum: General Discussion Forum
- Topic: Round #2- Identify this hood?
- Replies: 10
- Views: 2045
Re: Round #2- Identify this hood?
Well, I have continued to research online and have come up with just ONE contender that I cannot fault: 1923 Oldsmobile Model 30 Deluxe. It may be called a Model 30-A, and the hood may continue to a 1924 Olds Model 30-B. The problem seems to be that Oldsmobile at that time was producing several mode...
- Sat Nov 13, 2021 7:25 pm
- Forum: General Discussion Forum
- Topic: Round #2- Identify this hood?
- Replies: 10
- Views: 2045
Re: Round #2- Identify this hood?
I agree with Bryant that both the Haynes photos he found look like good candidates. The problem is we need to see a little bit more or different angle on the hood pictures. I have been looking and can say with confidence that it is NOT any of these Haynes models: 1917 - Model 36 1919 - Sedan & Touri...
- Sat Nov 13, 2021 1:16 am
- Forum: General Discussion Forum
- Topic: Round #2- Identify this hood?
- Replies: 10
- Views: 2045
Re: Round #2- Identify this hood?
Well, Bryant's suggestion looks pretty good. I have looked on the internet and in my Automobile Quarterlies and have not been able to find any Haynes that looks like this one. Wayne's suggestions may be good too. I searched Oaklands and did not come up with anything close. In looking at Oldsmobiles,...
- Fri Nov 12, 2021 6:52 pm
- Forum: General Discussion Forum
- Topic: Round #2- Identify this hood?
- Replies: 10
- Views: 2045
Round #2- Identify this hood?
OK, I will play. Thanks Bryant for Round #1 on 11/11! This hood is destined for the speedster under construction. Side panels measure about 34" long, and 14" tall. The hood is wide, something like 26 or 28" at the radiator end, and is heavier metal than a Model T hood. Looks like it came from a much...
- Wed Sep 16, 2020 12:37 am
- Forum: General Discussion Forum
- Topic: 13T - Rocky Mountain Brakes and While You're There
- Replies: 3
- Views: 1433
Re: 13T - Rocky Mountain Brakes and While You're There
1913 and 1914 (I am told) rear differentials have the three spider gears with replaceable bronze bushings. I have only ever found one, and yes I did successfully find modern bronze bushings in a standard size that fit the gears and the three corner gear stub axle. I used the solid bronze style bushi...
- Fri Sep 04, 2020 7:56 pm
- Forum: General Discussion Forum
- Topic: Using a single port Chevy head for poor man's ohv?
- Replies: 17
- Views: 3376
Re: Using a single port Chevy head for poor man's ohv?
Jason, the answer is yes. The Chevrolet head has NO combustion chamber in it. It is just flat. Consequently the entire combustion chamber is within the thickness of the adapter plate. Most I have seen are about 1", but it would be worth doing some calculations on volume to determine compression rati...
- Sun Apr 19, 2020 12:57 am
- Forum: General Discussion Forum
- Topic: Tbay problem
- Replies: 9
- Views: 3788
Re: Tbay problem
On my search there are 4900+ results listed, and only 100 on one page show. There is no button at the bottom to change the number of listings showing per page. There is nothing showing any additional pages to go to. I have not been able to find any "work around".
- Wed Mar 18, 2020 7:28 pm
- Forum: Classifieds - Parts
- Topic: Distributor head Bosch front plate F/S
- Replies: 2
- Views: 1608
Re: Distributor head Bosch front plate F/S
I will take them, Layden. Sending you email as you show. Thx / Tim Knapp, Wilsonville, OR
- Mon Mar 09, 2020 12:05 am
- Forum: General Discussion Forum
- Topic: LETS TALK REAR ENDS
- Replies: 10
- Views: 5104
Re: LETS TALK REAR ENDS
I am using mainly the axle gears, the spider, and the spider gears. The 3 legs of the spider need to be ground down shorter to fit in the Ruckstell carrier. New axles, a variety of new Ruckstell parts (thankyou Chaffins!), and reusing what I can from the old Ruckstells. Had to break down one rear as...
- Sat Mar 07, 2020 3:39 pm
- Forum: General Discussion Forum
- Topic: LETS TALK REAR ENDS
- Replies: 10
- Views: 5104
Re: LETS TALK REAR ENDS
Well, I have been busy tearing down rear ends to find good pieces for 2 Ruckstell rebuilds. Am now on 4 loose differentials with axles and 3 additional rear ends in their housings. The spider gear sets seem to be a bit of a problem. The spider gear shafts on many are galled on one of the 3 arms, and...
- Sat Feb 15, 2020 11:38 pm
- Forum: General Discussion Forum
- Topic: Bushing hand brake cross shaft brackets?
- Replies: 5
- Views: 2711
Re: Bushing hand brake cross shaft brackets?
I am not driving with them yet, but I have brazed up several (building up all around the shaft diameter), removed the levers from the end, chucked them up in a lathe and turned the brazing down to match the diameter I need. The brackets can be reamed if you have access to a large reamer of the right...
- Thu Jan 30, 2020 6:42 pm
- Forum: General Discussion Forum
- Topic: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
- Replies: 29
- Views: 8501
Re: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
OK. The same catalog shows 33 different rims for 20 different Chevrolet models between 1919 and 1929. All were made by Jaxon or Kelsey-Hayes. However, there is only one loose lug rim in 21 x 4.5. That is a Jaxon Type 30 rim. (click on photo and it will turn right way up)
- Wed Jan 29, 2020 8:05 pm
- Forum: General Discussion Forum
- Topic: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
- Replies: 29
- Views: 8501
- Wed Jan 29, 2020 8:02 pm
- Forum: General Discussion Forum
- Topic: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
- Replies: 29
- Views: 8501
Re: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
And here are the Cleve Weld, Firestone and Kelsey-Hayes rims:
- Wed Jan 29, 2020 7:58 pm
- Forum: General Discussion Forum
- Topic: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
- Replies: 29
- Views: 8501
Re: Did any of the Ford 21 inch wood wheels come with loose lugs looks like maybe early Chevrolet, But?
The other way to come at this question is from the part supplier end. Attached copies are from the 1929 "Official Catalog of Genuine Wheels, Rims and Parts" published by the National Wheel and Rim Association. Rim photos in the following posting.
- Tue Jan 21, 2020 8:00 pm
- Forum: Classifieds - Parts
- Topic: Cast iron Warford - Complete
- Replies: 10
- Views: 4488
Re: Cast iron Warford - Complete
Actually, I have looked at many Warford 3-speeds with straight shift levers. I do not think they were manufactured with a dogleg, I think someone bent the levers that way to make them fit their installation, at least until the Model A Warfords. The shift tower looks much like the 2nd version of the ...
- Fri Mar 08, 2019 4:55 pm
- Forum: Classifieds - Parts
- Topic: Loading The Wagon for Chickasha
- Replies: 22
- Views: 8150
Re: Loading The Wagon for Chickasha
Hi Dan- When you get unloaded at Chickasha, would you please try to snap a few photos of the Warfords, Right side, left side, also showing the shifter? Those plus the serial number showing on each would be a welcome addition to our Warford data. Thx / Tim
- Fri Mar 08, 2019 4:51 pm
- Forum: Classifieds - Parts
- Topic: Want To Trade: Speedster Drum Headlights
- Replies: 5
- Views: 3276
Re: Want To Trade: Speedster Drum Headlights
The drum headlights and trim rings look very much like some I know to be Chevrolet. I have no info on the "Indiana" stamp, however. ./ Tim
- Fri Mar 01, 2019 11:56 pm
- Forum: General Discussion Forum
- Topic: Rebuilding Cast Iron Warford
- Replies: 13
- Views: 6268
Re: Rebuilding Cast Iron Warford
Hi Matt- Based on the Warfords I have looked over, the serial number on the case should match the serial number on the shift tower. This is true all the way back to the early aluminum case Warfords. I have looked at several with non-matching numbers on the shift tower, and concluded that the shift t...
- Fri Mar 01, 2019 6:49 pm
- Forum: General Discussion Forum
- Topic: Rebuilding Cast Iron Warford
- Replies: 13
- Views: 6268
Re: Rebuilding Cast Iron Warford
With regards to the note that there were "more aluminum ones manufactured" I offer the following info. I have been trying to assemble a sequence on what production changes were made and when. I have verified aluminum Warford serial numbers as low as #1313, and as high as #75938. For iron Warford ser...
- Wed Jan 16, 2019 11:15 pm
- Forum: Classifieds - Parts
- Topic: WTB BOSCH FRONT PLATE DISTRIBUTOR
- Replies: 15
- Views: 7611
Re: WTB BOSCH FRONT PLATE DISTRIBUTOR
I have always thought the Bullock story is a great Model T story. I have never read or heard discussed that the Noel Bullock Pikes Peak car still exists. I was in Colorado Springs and found online that the Broadmoor Resort has a historic museum with many carriages and other artifacts. It is called t...
- Wed Jan 16, 2019 10:29 pm
- Forum: Forum Support Questions
- Topic: PM's
- Replies: 16
- Views: 9574
Re: PM's
I currently show one private message waiting for me. I am logged in. I click on the "1" and get a new screen "General Error, module not accessible". Am not clear if this is the problem, or if it is due to the action Chris has taken to try and isolate the problem.
- Fri Jan 11, 2019 10:14 pm
- Forum: Classifieds - Parts
- Topic: WTB Outside brakes for 1921 era car
- Replies: 9
- Views: 4731
Re: WTB Outside brakes for 1921 era car
Well, I have tried everything I can think of. Yes, I am registered. Yes, I am logged in. Yes, I hit send not just preview. Last try when I hit preview there is a red letter notification "you tried to send a private message to too many recipients". I do not understand as I would think ONE recipient w...
- Fri Jan 11, 2019 9:23 pm
- Forum: Classifieds - Parts
- Topic: WTB Outside brakes for 1921 era car
- Replies: 9
- Views: 4731
Re: WTB Outside brakes for 1921 era car
Shows it went on this end. Just resent, which should have original message attached. / Tim
- Fri Jan 11, 2019 3:41 pm
- Forum: Classifieds - Parts
- Topic: WTB Outside brakes for 1921 era car
- Replies: 9
- Views: 4731
Re: WTB Outside brakes for 1921 era car
Hi Bruce- Sent you a PM. / Tim