MTFCA Forum

TRDxB2

Pictures of what you have might help From the MTFCA encyclopedia 1914 Similar to 1913 but with the front bill reinstated and with reinforcing beads added across widest part of the front, and in apron area on the front and rear fenders. Later versions appeared with the embossed moldings in the splash...

TRDxB2

I would think that Blockley is misssing out on a huge opportunity by not having at least one U.S. distributor instead of selling and shipping four or five tires and/or tubes at a time directly to U.S. customers. One reason for their process is to reduce inventory holding costs. Model T tire demand ...

TRDxB2

I'd follow these instructions and then test again https://modeltfordfix.com/adjusting-the ... patterson/

TRDxB2

What happened to the Fun Project replacement? Need to ask Birdhaven :? Tried to colorize an old photo. Didn't change much but looks like unpainted wood. We do know that Henry wouldn't add a process if it was unnecessary and added cost. Yes sealing is advisable. I use Minwax wood hardner - it penetr...

TRDxB2

The value may be in the parts - 1926-27 starter Hogs Head and the pan if usable.
Engine/transmission rebuild ? Do you have a boat? Just in case....

TRDxB2

Here are some Distributor wiring diagrams, minor differences for lights. Click on image to enlarge. Use your backing terminal ID's to match to diagrams.

TRDxB2

As Steve indicated a picture of the back to confirm its the same - I have the AB switch plate as well, but not hooked to anything. The documentation I have is for a Model 600, don't see why it would b different. Also a one page for a front plate that uses the same distributor body 748107-1.jpg -- --...

TRDxB2

All I can say is that not every member knows every other member (what they know, what cars they have or are what they are working on at any given time). Now I know someone else. A simple derogatory answer to your question "what do I give up using a 350CCA battery vs. a 500CCA battery?" would have be...

TRDxB2

If someone brought 4 inner tubes to the US on AND they cost L70 each, what do they cost if you carry them over as luggage? VAT? Its been to long since I did such. So I looked up some info that may apply. After reading it, I feel its not worth the hassle or effort anymore, best to ship it. https://w...

TRDxB2

The questions I asked (some the same as others) were just to trying to understand the constraints placed on a battery selection. Like some others, I don't know anything about the car you have in mid. :cry: Since someone indicated you have a WOSP starter and not a stock Model T starter. So knowing t...

TRDxB2

Wondering what the correct tail lamp bracket should be for a late 1915 to early 1916 Model T Coupelet. I have heard it is just a runabout bracket, and I’ve also heard that it is a special bracket that mounts underneath the body. If anyone knows and has pictures, it would be very helpful. Also looki...

TRDxB2

Damn Frank, you come across as one of the most condescending individuals by the way you ask questions!!! :oops: At least from my view anyway, your answer would likely have been most helpful if you would have just started your paragraph beginning with " Two specifications to look at for...." and lef...

TRDxB2

Hi all, What suggestions do you all have for replacing the small brass plugs that seal the carb passageways? They're made of brass originally, I believe. Can I use heavy copper copper wire, or does it have to be brass? Thanks for your help. John Stan Howe suggested using set screws for the next tim...

TRDxB2

I have a brass T in the shop that presently has a 12v Group 121R battery rated at 550CCA and a T starter & later hogshead retrofitted. Space under the back seat is very limited so we are looking at a way of minimizing space. This starter is mostly used when emergency starting the engine (-stalled t...

TRDxB2

I counted 34. You may missed #6 looks like a big head of hair behind #7. Also #4 is set back then behind #5 & #7

TRDxB2

colonelpowers wrote: ↑
Wed Apr 10, 2024 3:12 pm
I just came across this carpet on ebay and wondered if anyone has ever ordered one to see if it is any good. It is $22.80 plus shipping so it certainly is cheap enough if it is any good.

Given the spacing for the pedals ... 1926-27? Hard to tell for sure

TRDxB2

Wondering what the correct tail lamp bracket should be for a late 1915 to early 1916 Model T Coupelet. I have heard it is just a runabout bracket, and I’ve also heard that it is a special bracket that mounts underneath the body. If anyone knows and has pictures, it would be very helpful. Also looki...

TRDxB2

I really need the contacts on the back side that are good enough to use. It the right switch Handel though. You need to show the parts you need. There were many manufacturers & even variations by them. I have some parts for the odd ones. The four rivets on the face of the switch points to a "Clum" ...

TRDxB2

That's the one Frank !!! I'm "technically challenged" so I don't know how to get rid of it !!! The image is called a Pop-Up. You may get similar from a merchandise website offering a discount, survey, to subscribe, set up cookies etc. Clicking on the X in the corner of the image will make them disa...

TRDxB2

I haven't seen it. Can you post a link? It's the pop-ups that won't go away that set me off. :) Here's the link normally used for the popup https://www.mtfca.com/ This is the link to the popup itself https://www.mtfca.com/event/model-t-museum-total-solar-eclipse/ this is the image - eclipse.png -- ...

TRDxB2

Especially in good condition

TRDxB2

I think the main question is how would the silicone or the aerosol filler adhere with the tar that's in the coil to make one solid unit. Why do they, or other options, need to adhere to any residual tar that's in the unit? The purpose of the tar is just to prevent things from moving around. Its jus...

TRDxB2

A paint source (colors don't always show correctly on computer screens)
https://www.autocolorlibrary.com/pages/1927-Ford.html
https://youtu.be/Qqnp-JBko0Y

TRDxB2

There's another way too The 'DIY' >>> https://mtfctulsa.com/Tech/distributors.htm
Renovating a Period Correct Distributor

TRDxB2

A solar flare hit me & was wondering if silicone casting material would be a good choice for filling a coil unit. Its non-conductive and would be easy to remove later if needed be. It could be applied in two sessions like making a mold, to make it even easier to remove. Tar was about the only soluti...

TRDxB2

We just saw the total eclipse and now it’s lighting up. Took about 3 minutes. It’s a neat and amazing view. It’s now 1:40 CST as I’m writing this. One of the local stations covering it said it was a fast 4 min and it was! And a few months for the buildup. Life goes on. Didn't Henry initially say "A...

TRDxB2

I used Valspar Hunter Green of these buckets. Had some Rustoleum Hunter Green in a spray can that was a shade darker than the Valspar
Cameras & individual computer screens render colors slightly different. But the Headlights displayed on my computer screen match to the real ones

TRDxB2

From the Forum's Encyclopedia

--
Other sources

TRDxB2

bump..........

TRDxB2

I have a freshly rebuilt front axel that has the wrong spindles (early ones). I had not idea there were different spindles and as "Murphy's Law" took over my wooden wheels don't go one far enough. Can I "re-use" the King Pins or do I need new ones? Since you show having a 1915, 1923 & a 1927 which ...

TRDxB2

...Lithium ion batteries seem wonderful right up until you see how many of them catch fire and can't be extinguished... Not all lithium-based batteries are the same and should not be confused for each other. I suggest that, when looking for replacement lithium vehicle batteries, you consider LiFePO...

TRDxB2

Everyone has their preference with good results. Engine modifications also affect selection. The original Ford specification was for a "light" oil, which has been equated to Today's 20w. One factor in selecting the "engine oil" is that it is also used by the transmission, often referred to as a wet ...

TRDxB2

Honestly, there are so many things that can go awry inside that generator it's crazy. It's quite easy to take out of the car. To fully inspect it, you really need to do so. Once it's out, you can jump your 6v battery to it and see if it turns like a motor. If not, then something is broken inside. I...

TRDxB2

What's the going wisdom about 6 volt batteries these days? Lots of motorcycle collectors I know are transitioning to lithium batteries, Light, leakproof, work well in warm weather, etc. Is there a good lithium option? My worry is that a regular lead-acid unit will just not take kindly to my sporadi...

TRDxB2

Hi all. I've been lurking here for a while now, reading and learning. I inherited a '25 Touring car back in 1999 when my dad passed away. He had bought it as a retirement project, then burned out on it before he even retired, leaving it driveable, but only partially assembled. All the parts are the...

TRDxB2

Has anyone successfully use a rust encapsulating paint on the inside of a engine pan to deal with surface rust? Rather than sandblasting? I hate trying to get sand out of tight places so they don't end up in the finished engine. Tanks. Craig. The level of rust may dictate a solution. There are prod...

TRDxB2

From the MTFCA Encyclopedia RADIATORS 1924 (Introduced about July 1923) Higher radiator. Outer shell now had a skirt at the bottom, over engine mount area. 1924-1926 Some flat tube radiators used during this period. Beginning in late 1925 an optional brass, nickel-plated, shell was offered . During ...

TRDxB2

From the MTFCA Encyclopedia STEERING COLUMN 1909-1910 3500 (T900). (Cars under 34,600, December 19, 1910) 50” long. Brass gear housing was a riveted assembly with the column fitting. Brass quadrant. Levers brass-plated with black hard-rubber knobs. The pitman arm was oval in cross-section, and short...

TRDxB2

Can't you return his money through eBay? I've done at least partial refunds through eBay. You must use eBay to do the refund since the money transfers all go trough eBay now. Thy act like a consignment store. Buyer pays them, they take their commission and pay you whats left over. See attachment Bi...

TRDxB2

If you have or intended to have the Magneto - you do not want any "additive" in the oil that is conductive. Graphite or zinc as can short out the mag post. There are always discussion about detergent & non-detergent oil & resulting slug build up. If you have never dropped the inspection cover on the...

TRDxB2

instructions for adding the brakes

T-2565-B Rocky Instructions.pdf: (388.9 KiB) Downloaded 24 times

instructions for the Brake Equalizer

T2565XS-5833.pdf: (183.93 KiB) Downloaded 17 times

--
--
discussions on the linings
viewtopic.php?t=9253

https://www.mtfca.com/discus/messages/1 ... 1279998740

TRDxB2

Frame flow chart (to read it better either down load the PDF (save it too) or click on the image & then the + ) https://www.mtfca.com/discus/messages/822076/Model_T_Frame_Identification_Chart_V2-356806-873486.pdf Frame chat bottom.png --- --- From the MTFCA Encyclopedia Frame Manufacturers Michigan ...

TRDxB2

Snyders indicated a Model A part number A-9155-RK try Mikes or other model a part suppliers https://www.mikes-afordable.com/product/A9155RK.html filter a.png -- Try Gaslight https://gaslightauto.storesecured.com/items/model-a-parts/cowl~fuel-tank/a-9155-rk-detail.htm gaslight.png -- Early Ford' $8.9...

TRDxB2

Don't have one but found some info
https://forums.aaca.org/topic/235321-we ... ank-gauge/
https://forums.aaca.org/topic/158542-we ... fo-sought/

TRDxB2

Perhaps Indiana Jones can help find them...

TRDxB2

Dan Hatch wrote: ↑
Thu Mar 28, 2024 1:56 pm
Wonder what ever happened to the dies?
Is someone making hubcaps off of them?
Or has another item fallen off the face of the planet?

Well..... As I recall Bob told me that Birdhaven bought all his tooling. They may have been sold earlier but if not...

TRDxB2

The first picture - does that wheel have front wheel brakes?

--
These are likely Model T since they are in a pile of T parts. But the one wheel has some rather large holes for studs
--

TRDxB2

I stumbled across this link https://www.mtfca.com/discus/messages/257047/318070.html?1351042041 ROBERT BERGSTADT October 30, 2012 Just dug out all the spinning and stamping dies, thank you for all your interest they are going up for sale. I know this is not the place to sell them just letting the pe...

TRDxB2

The plus on the exhaust manifold is that it not prone to warp but check the threads The ARVIN on eBay https://www.ebay.com/itm/134990497521?itmmeta=01HT1RNAJX9KRGAGG7DF5C63F9&hash=item1f6e0f86f1:g:JEoAAOSwp9Fl28tE&itmprp=enc%3AAQAJAAAAwDo3F6iMi%2FOF3YLaMPj%2B86oDEvh18g9wMx2Ge0nxx97XSIhih31F9YzxE95dN...

TRDxB2

Some instructions by Stan Howe

Holley G - specifics by Stan Howe.pdf: (653.02 KiB) Downloaded 26 times

--
Step by step rebuild instruction for Holley G from Model T Ford Fix Authored by Royce Peterson
Rebuilding a Holley Model G Carburetor https://modeltfordfix.com/rebuilding-a- ... arburetor/

TRDxB2

I sell stuff & prefer PayPal to friends & family, because check transactions take more time & rick in the mail. And if I don't know the buyer another week for the check to clear. If someone wants to use PayPal "Goods & Services" I'll just add 3% (because my PayPal is not a Business) to the total and...

TRDxB2

Its is my understanding that the amperage output of an alternator is dependent upon its rated current output, rotational speed & the demand placed upon it from the cars electrical system. In other words it would not output more amps then placed upon it. So some calculation can be made battery, coils...

TRDxB2

Hey fellow T people. I am trying to buy something for my 1916 Touring. I am offering his asking price but he will only accept "friends and family " payment. What are the advantages or disadvantages for me? Campbell Tellman II Beaufort, NC Dan is correct - "Friends & Family" provides no protection. ...

TRDxB2

what does the Atwater Kent plate look like? Good description https://www.mtfca.com/discus/messages/822076/920884.html?1544454327 There was one on eBay a few days ago -https://www.ebay.com/itm/266737873284?itmmeta=01HT0P2GPXD350E3S356FHG5MM&hash=item3e1ad0f184:g:k18AAOSw8I9mAdJk&itmprp=enc%3AAQAJAAA...

TRDxB2

Kenny Edmondson wrote: ↑
Wed Mar 27, 2024 1:50 pm
Hard to tell exactly from the pictures, but do the pictures below look anything like the switch you’re looking for? If the bezel is separate, I don’t have it. If there is no bezel then this probably isn’t correct…

Yours is a 1915 Push/Pull Headlight switch

TRDxB2

Video of driving across the bridge :shock: https://www.google.com/search?q=mighty+mac+toll&client=firefox-b-1-d&sca_esv=79ced4a93b7e85b0&ei=hkYEZs6aIf-kptQPsqWLkAg&ved=0ahUKEwjO9Ynp65SFAxV_kokEHbLSAoIQ4dUDCBA&uact=5&oq=mighty+mac+toll&gs_lp=Egxnd3Mtd2l6LXNlcnAiD21pZ2h0eSBtYWMgdG9sbDIFECEYoAEyBRAhGKA...

TRDxB2

Stan The air in a tank sitting in the sun will pretty much just warm up. After following Brent's great instructions, hook up a vacuum cleaner backwards to blow air through the tank. Works just like compressed air. DAVE, Or sneak you 'lady's' electric hair dryer out of the house and into the garage;...

TRDxB2

Adding fuel to the fire... Provenance - the history of the car, ownership & modifications made - is what validates its correctness & originality. The correct parts per car don't define originality (as made it came off the assembly line) only correctness (as Ford would have built it). -- Unless one (...

TRDxB2

Think we need to put the arguments on repairing a gas tank in the proper perspective. As stated, several times, the danger of an explosion is the presence of fumes in the tank not in the method of repair. So the amount of heat applied better not be equal to the flashpoint of the vapor present. -- Fr...

TRDxB2

Read this https://byjus.com/physics/capacitor-types/
It explains these types
Ceramic Capacitors
Film Capacitors
Power Film Capacitors
Electrolytic Capacitors
Ceramic capacitors
Film capacitors
Paper Capacitors
Electrolytic capacitors

TRDxB2

Frank I actually have the 3rd one listed on eBay on a watch list. I always wonder if they will still work. Kevin Thanks this is exactly what I was thinking with the driven nut modification. It’s a wonder it doesn’t come this way. Bryant You don't need to wonder- just plan on replacing the coil - ma...

TRDxB2

Use plain plate glass, just like original. Easy to cut to a round circle. Don't use tempered glass, you cannot cut it, the tempering will make the glass shatter. Don't use laminate safety either the plastic film between the glass will cause reflections and will distort and craze with heat of the ga...

TRDxB2

If your looking for something stronger Tempered Glass: It is a type of heat-resistant glass that has been treated at high temperatures to make it extra strong. This makes it safer and more durable than regular glass, as it can withstand impacts and other physical shocks without breaking. It’s also r...

TRDxB2

I have a 1921 T The differences in electric headlight buckets are how they are mounted on the car: fork, fender support arm (subtle bracket differences), or fender brace. Also the adjustment position screw 6 vs 9 o'clock. Rim finish 1915 Brass, then Black then Nickle (1926-27). The lens changes fro...

TRDxB2

Kevin Thanks for the info about the drive nut modification. I wasn’t sure about the washer until I saw the picture with one in line. Frank Thanks for the extra information on parts with numbers. I would love to find that AB coil somewhere. Getting closer Bryant There are two different American Bosc...

TRDxB2

bump still available

TRDxB2

Iam looking for any information related to the American Bosch front plate distributor. Parts books, installation information and the like. 48CD81C0-7475-4D03-BA7A-8D5FB5EFA56F.jpeg this is a type T448 that I have obtained. Any help is much appreciated. Bryant Forgot I had this - 1923boschmaginstman...

TRDxB2

WorldChamp1914 wrote: ↑
Sun Mar 24, 2024 1:23 am
8 1/4 Macbeth…..any out there for sale?

Yes the ones above are mine and for sale
They are the early flat style so the eyebrow is flat not bulged out. early lens are round & use a different rim style clips than H lens. have them too

TRDxB2

RVA23T wrote: ↑
Sat Mar 23, 2024 8:34 pm
Yep after we spoke someone else stated it is a Reeder Dizzy...Let me know It's boxed up waiting for a new home!

It looks a bit different. maybe its the JC version or a 2nd Reader version?

TRDxB2

Not Mine - says "new" & $595 no pictures of what's under the cap. Seller has a few other model T parts https://www.ebay.com/itm/325845048270?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=325845048270&targetid=1645685074248&device=c&mktype=pla&googleloc=9021923&poi=&camp...

TRDxB2

Looks like an epoxy will work (Kwick Poly is no longer made) https://www.google.com/search?client=fi ... ir+baklite
So look for one that sets up black to match.
JB Weld & Gorilla Glue also have been used see internet link

TRDxB2

I read this including the 3 previous archived posts, I did not see what material was used to fix cracks, maybe I missed it. George I used Flex Steel Paste to restore a 1913-22 switch base that was made of hard rubber. It blended in so well you cant tell & its hard. It may not be the best product to...

TRDxB2

Does anyone have any tips on refurbishing the old rubber black steering wheels? Mine has some cracks and is generally worn looking. Try these https://www.mtfca.com/discus/messages/80257/89564.html?1240573989 https://www.mtfca.com/discus/messages/179374/200802.html?1301421083 https://www.mtfca.com/d...

TRDxB2

Across from the Art Institute of Chicago - E. Adams Street and Michigan Avenue https://www.google.com/maps/place/Walgreens/@41.8796034,-87.6244337,3a,30y,275.78h,92.38t/data=!3m6!1e1!3m4!1sZhGLusA72qOmxuXJEeTf2Q!2e0!7i16384!8i8192!4m15!1m8!3m7!1s0x880e2ca3ee4cdd99:0x6bf5397d3b5ea2bd!2sMichigan+Ave+%...

TRDxB2

Use your gas grill outside. don't need the tar smell inside

TRDxB2

Video of balancing beads inside the tire in action. They put a mini mini camera inside the tire
you'll need to wait abit to skip over the ads https://www.youtube.com/watch?v=_7CghNsdGbk

TRDxB2

Charlie B in N.J. wrote: ↑
Thu Oct 12, 2023 10:08 pm
Wonder if they ever put up that plaque on the building in N.Y. City where the highway was supposed to start? Somewhere in Times Square I think?

They put up a sign on a pole NE corner of 42nd & Broadway
https://en.wikipedia.org/wiki/Lincoln_Highway
--

TRDxB2

By Erik Barrett in Auburn Ca. on Monday, September 17, 2018 - 09:43 pm:

Put them in the freezer overnight and the tar becomes brittle. You can chip it out with a small hammer and chisel.

https://www.mtfca.com/discus/messages/8 ... 1537338755

TRDxB2

check it out. Picture of where it get stuck would be best

TRDxB2

If we had one how would we know?
Not sure if everyone knows how to identify one in their stash.

TRDxB2

* Contains PTFE * OEM-specified * Standard applications: stainless steel fittings, head bolts into through holes, oil psi sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings * Motorcycle applications: timing hole plug and oil hose fittings * He...

TRDxB2

Are you installing an original cast iron Ford script sediment bulb/valve? Yellow Teflon tape is what you use for gasoline fittings as long as the threads are sharp and not damaged or pitted, otherwise, use the pipe dope. Just be sure it will stand up to gasoline. For a sure seal, feel free to use b...

TRDxB2

Will vinegar kill chiggers? This hack works because chiggers hate the smell of vinegar, so it will repel them from the area. Rather than going towards the scent, they will run in the opposite direction. It's actually an effective bug repellent in general — it can also keep away ants, fruit flies, an...

TRDxB2

It took me over an hour and a half to demount one freaking tire today. Its been on the car for close to 15 years and to make matters worse back when I put that tire and tube together back 15 years ago I used a flap. What PI freaking TA. Me and flaps are officially done, Never ever again. I had to r...

TRDxB2

Swap meets are suffering from the same illness that Shopping Malls had/have, "Internetitis". Another factor plaguing Pre-war Swap meets is the diminishing number of pre-war buyers. Shopping Malls were the places that offered many stores selling similar merchandise resulting in a wider selection of i...

TRDxB2

From the MTFCA Encyclopedia https://www.mtfca.com/encyclo/I-O.htm#lamps

No oil lamps in 1927

TRDxB2

I need to install the sediment bowl to the cowl gas tank, thanks Do not use Teflon tape or sealant for "gas" valves (that's natural gas) If it for gasoline make sure its soft setting and will not harden. There are lots of discussion on how to get the sediment bulb off when stuck. Haven't used it bu...

TRDxB2

So just spitballing here, I’m facing reality that a swap meet around springtime just dedicated to pre-war may not be viable long term but if there were a swap meet where there was a dedicated area & building for pre-war stuff including open air, covered open air & a climate controlled building for ...

TRDxB2

I had just finished a lengthy reply to Gene French's post on the end of Chickasha. I hit the Enter button to post it and things went crazy. The post about the TV test pattern was there (both above and below my post. Then I backed out to the Discussion Forum topic page and then clicked on Gene's Chi...

TRDxB2

From your past discussion you indicated that your distributor" This distributor was Made in China either with the proper lobes never there or almost totally worn off, which is not likely! The bottom bushing was worn excessively, but the top bushing was hardly worn. That shaft is not likely a sold se...

TRDxB2

interesting was too young to know how to use it

TRDxB2

What year did they first start stamping engine numbers on the frame? Which side of the frame is correct? From the MTFCA Encyclopedia need to scroll down to answer https://www.mtfca.com/encyclo/C-D.htm#Chassis2 FRAME NUMBERS Accession 94. Walter Fishleigh files. “Motor number was first placed on fra...

TRDxB2

Email our Assistant Admin he makes new ones
Assistant WebSite Admin
1921 Model T Touring, 1930 Model A Roadster
Voltage Regulators, Starter & Generator Repair
www.modeltregulators.com
www.modeltstarters.com

TRDxB2

Video of what they do https://m.facebook.com/FentonHistoryCenter/videos/raydex-light-filters/903429553574209/ Check this out pair went unsold uin Victoria https://online.doningtonauctions.com.au/m/lot-details/index/catalog/69/lot/13172/LAMP-A-pair-of-1920s-Raydex-brass-half-head-lamp-diffusers These...

TRDxB2

One of my winter projects is to replace the wiring harnesses on my '19 touring. I started installing the timer / generator harness & put it back in the same spot as the old harness that I removed. I wasn't sure how to rout the wires along the frame so I searched the interweb for some pictures. The ...

TRDxB2

A perfect restoration has imperfections

How perfect can a 1914 Model T be when it only took 93 minutes to assemble it.

TRDxB2

Someone once said "let he who is without sin cast the first stone". Keeping the hobby alive is totally dependent on the number of cars resurrected & getting on the road. Put, puttering, T's & TT's that are driven in parades, ice cream runs etc are the attention getters and generate interest. Station...

TRDxB2

Ed: Ihave a single coil of the type you are asking about. I have enclosed four pictures of the coil. I 'm not at home till the first of April. I cann't read the information on the coil from the pictures. If this looks like the one you need, let me know and I will get the information on the coil whe...

TRDxB2

Caswell plating has the easiest to use chemical but not the least expensive power supply. I'd bet that TexPowers is exactly the same as Caswell & Dragons. Buying from Grainger has more power & easy to deal with when necessary. power.png -- -- This video shows "how to" on a budget https://www.ebay.co...

TRDxB2

Frank, Have you a vendor's name and number for that bulb, please? Dave They are sold by most supplier's now. $$ vary. They are not cheep but can be justified if need a reflector 6V, 8V, 12V Positive or Negative Ground (chassis) electrical systems with no wiring changes Generator or Alternator Color...

Search found 5433 matches