Search found 5438 matches
- Fri Apr 19, 2024 1:27 am
- Forum: General Discussion Forum
- Topic: How many volts output from generator?
- Replies: 18
- Views: 748
Re: How many volts output from generator?
Update and more questions. I set the third brush so that the car was producing about 6-8 amps at a high idle and both the generator and old cutout seemed to be doing their job. The generator is putting out just over 8 volts and the cutout closes at about 6.5 volts. This evening I took the car out f...
- Wed Apr 17, 2024 8:09 pm
- Forum: General Discussion Forum
- Topic: Is this right
- Replies: 20
- Views: 661
Re: Is this right
New owner of a 1912 Model T with later hogshead and starter. See the photo below noting the exposed portion of the clutch shaft coming out of the hogshead as indicated by the gray pen in the photo. Aout 1/2 " of shafting is exposed. The problem is that the linkage coming off the clutch pedal is int...
- Wed Apr 17, 2024 6:31 pm
- Forum: General Discussion Forum
- Topic: Repair Pricing
- Replies: 6
- Views: 702
Re: Repair Pricing
Some more to hang in the shop
I added this because its flat, not on an angle, in case someone wants to print it off
- Wed Apr 17, 2024 6:17 pm
- Forum: Classifieds - Parts
- Topic: 1915 transmision
- Replies: 8
- Views: 375
Re: 1915 transmision
WTB 1915 Aluminum transmission cover. With or without pedals I have one also in Moline IL. Can ship it, get it to Des Moines next visit by grandson (was just here?), pickup here & visit Craig Beek's Model T museum (has 17 restored Brass T's & other T memorabilia ). If I can remember, there was some...
- Tue Apr 16, 2024 7:27 pm
- Forum: General Discussion Forum
- Topic: King Pins
- Replies: 25
- Views: 1047
- Mon Apr 15, 2024 5:02 pm
- Forum: General Discussion Forum
- Topic: Roadster fender irons
- Replies: 7
- Views: 288
Re: Roadster fender irons
Pictures of what you have might help From the MTFCA encyclopedia 1914 Similar to 1913 but with the front bill reinstated and with reinforcing beads added across widest part of the front, and in apron area on the front and rear fenders. Later versions appeared with the embossed moldings in the splash...
- Mon Apr 15, 2024 10:18 am
- Forum: General Discussion Forum
- Topic: Shipping from England has gone up Blockley tubes
- Replies: 22
- Views: 1560
Re: Shipping from England has gone up Blockley tubes
I would think that Blockley is misssing out on a huge opportunity by not having at least one U.S. distributor instead of selling and shipping four or five tires and/or tubes at a time directly to U.S. customers. One reason for their process is to reduce inventory holding costs. Model T tire demand ...
- Mon Apr 15, 2024 10:07 am
- Forum: General Discussion Forum
- Topic: How many volts output from generator?
- Replies: 18
- Views: 748
Re: How many volts output from generator?
I'd follow these instructions and then test again https://modeltfordfix.com/adjusting-the ... patterson/
- Sat Apr 13, 2024 1:10 pm
- Forum: General Discussion Forum
- Topic: Color for coil box wood 1926
- Replies: 4
- Views: 236
Re: Color for coil box wood 1926
What happened to the Fun Project replacement? Need to ask Birdhaven :? Tried to colorize an old photo. Didn't change much but looks like unpainted wood. We do know that Henry wouldn't add a process if it was unnecessary and added cost. Yes sealing is advisable. I use Minwax wood hardner - it penetr...
- Sat Apr 13, 2024 1:09 pm
- Forum: General Discussion Forum
- Topic: Value of engine/trans
- Replies: 23
- Views: 1806
Re: Value of engine/trans
The value may be in the parts - 1926-27 starter Hogs Head and the pan if usable.
Engine/transmission rebuild ? Do you have a boat? Just in case....
Engine/transmission rebuild ? Do you have a boat? Just in case....
- Sat Apr 13, 2024 1:00 pm
- Forum: General Discussion Forum
- Topic: American Bosch ignition switch
- Replies: 8
- Views: 431
Re: American Bosch ignition switch
Here are some Distributor wiring diagrams, minor differences for lights. Click on image to enlarge. Use your backing terminal ID's to match to diagrams.
- Sat Apr 13, 2024 12:42 pm
- Forum: General Discussion Forum
- Topic: American Bosch ignition switch
- Replies: 8
- Views: 431
Re: American Bosch ignition switch
As Steve indicated a picture of the back to confirm its the same - I have the AB switch plate as well, but not hooked to anything. The documentation I have is for a Model 600, don't see why it would b different. Also a one page for a front plate that uses the same distributor body 748107-1.jpg -- --...
- Sat Apr 13, 2024 11:53 am
- Forum: General Discussion Forum
- Topic: 12v Battery vs 6v Battery requirements
- Replies: 15
- Views: 576
Re: 12v Battery vs 6v Battery requirements
All I can say is that not every member knows every other member (what they know, what cars they have or are what they are working on at any given time). Now I know someone else. A simple derogatory answer to your question "what do I give up using a 350CCA battery vs. a 500CCA battery?" would have be...
- Sat Apr 13, 2024 11:40 am
- Forum: General Discussion Forum
- Topic: Shipping from England has gone up Blockley tubes
- Replies: 22
- Views: 1560
Re: Shipping from England has gone up Blockley tubes
If someone brought 4 inner tubes to the US on AND they cost L70 each, what do they cost if you carry them over as luggage? VAT? Its been to long since I did such. So I looked up some info that may apply. After reading it, I feel its not worth the hassle or effort anymore, best to ship it. https://w...
- Fri Apr 12, 2024 5:57 pm
- Forum: General Discussion Forum
- Topic: 12v Battery vs 6v Battery requirements
- Replies: 15
- Views: 576
Re: 12v Battery vs 6v Battery requirements
The questions I asked (some the same as others) were just to trying to understand the constraints placed on a battery selection. Like some others, I don't know anything about the car you have in mid. :cry: Since someone indicated you have a WOSP starter and not a stock Model T starter. So knowing t...
- Fri Apr 12, 2024 2:50 pm
- Forum: General Discussion Forum
- Topic: Coupelet Lamp Brackets HELP!
- Replies: 22
- Views: 1149
Re: Coupelet Lamp Brackets NEED!
Wondering what the correct tail lamp bracket should be for a late 1915 to early 1916 Model T Coupelet. I have heard it is just a runabout bracket, and I’ve also heard that it is a special bracket that mounts underneath the body. If anyone knows and has pictures, it would be very helpful. Also looki...
- Fri Apr 12, 2024 2:41 pm
- Forum: General Discussion Forum
- Topic: 12v Battery vs 6v Battery requirements
- Replies: 15
- Views: 576
Re: 12v Battery vs 6v Battery requirements
Damn Frank, you come across as one of the most condescending individuals by the way you ask questions!!! :oops: At least from my view anyway, your answer would likely have been most helpful if you would have just started your paragraph beginning with " Two specifications to look at for...." and lef...
- Thu Apr 11, 2024 10:49 pm
- Forum: General Discussion Forum
- Topic: Brass plugs in car. Passageways
- Replies: 5
- Views: 437
Re: Brass plugs in car. Passageways
Hi all, What suggestions do you all have for replacing the small brass plugs that seal the carb passageways? They're made of brass originally, I believe. Can I use heavy copper copper wire, or does it have to be brass? Thanks for your help. John Stan Howe suggested using set screws for the next tim...
- Thu Apr 11, 2024 10:38 pm
- Forum: General Discussion Forum
- Topic: 12v Battery vs 6v Battery requirements
- Replies: 15
- Views: 576
Re: 12v Battery vs 6v Battery requirements
I have a brass T in the shop that presently has a 12v Group 121R battery rated at 550CCA and a T starter & later hogshead retrofitted. Space under the back seat is very limited so we are looking at a way of minimizing space. This starter is mostly used when emergency starting the engine (-stalled t...
- Thu Apr 11, 2024 12:26 am
- Forum: General Discussion Forum
- Topic: What year loaded Model T
- Replies: 10
- Views: 669
Re: What year loaded Model T
I counted 34. You may missed #6 looks like a big head of hair behind #7. Also #4 is set back then behind #5 & #7
- Wed Apr 10, 2024 5:09 pm
- Forum: General Discussion Forum
- Topic: Model T Carpet on ebay
- Replies: 7
- Views: 582
Re: Model T Carpet on ebay
Given the spacing for the pedals ... 1926-27? Hard to tell for surecolonelpowers wrote: ↑Wed Apr 10, 2024 3:12 pmI just came across this carpet on ebay and wondered if anyone has ever ordered one to see if it is any good. It is $22.80 plus shipping so it certainly is cheap enough if it is any good.
- Wed Apr 10, 2024 4:56 pm
- Forum: General Discussion Forum
- Topic: Coupelet Lamp Brackets HELP!
- Replies: 22
- Views: 1149
Re: Coupelet Lamp Brackets NEED!
Wondering what the correct tail lamp bracket should be for a late 1915 to early 1916 Model T Coupelet. I have heard it is just a runabout bracket, and I’ve also heard that it is a special bracket that mounts underneath the body. If anyone knows and has pictures, it would be very helpful. Also looki...
- Wed Apr 10, 2024 4:53 pm
- Forum: Classifieds - Parts
- Topic: WTB 19-20 ignition switch
- Replies: 5
- Views: 433
Re: WTB 19-20 ignition switch
I really need the contacts on the back side that are good enough to use. It the right switch Handel though. You need to show the parts you need. There were many manufacturers & even variations by them. I have some parts for the odd ones. The four rivets on the face of the switch points to a "Clum" ...
- Wed Apr 10, 2024 1:08 pm
- Forum: General Discussion Forum
- Topic: Eclipse Pop-Up
- Replies: 12
- Views: 554
Re: Eclipse Pop-Up
That's the one Frank !!! I'm "technically challenged" so I don't know how to get rid of it !!! The image is called a Pop-Up. You may get similar from a merchandise website offering a discount, survey, to subscribe, set up cookies etc. Clicking on the X in the corner of the image will make them disa...
- Wed Apr 10, 2024 12:08 am
- Forum: General Discussion Forum
- Topic: Eclipse Pop-Up
- Replies: 12
- Views: 554
Re: Eclipse Pop-Up
I haven't seen it. Can you post a link? It's the pop-ups that won't go away that set me off. :) Here's the link normally used for the popup https://www.mtfca.com/ This is the link to the popup itself https://www.mtfca.com/event/model-t-museum-total-solar-eclipse/ this is the image - eclipse.png -- ...
- Mon Apr 08, 2024 5:48 pm
- Forum: Classifieds - Parts
- Topic: WTB Original 1912 Hubcaps - one or more
- Replies: 5
- Views: 583
Re: WTB Original 1912 Hubcaps - one or more
Especially in good condition
- Mon Apr 08, 2024 5:39 pm
- Forum: General Discussion Forum
- Topic: Tar for coil potting
- Replies: 16
- Views: 636
Re: Tar for coil potting
I think the main question is how would the silicone or the aerosol filler adhere with the tar that's in the coil to make one solid unit. Why do they, or other options, need to adhere to any residual tar that's in the unit? The purpose of the tar is just to prevent things from moving around. Its jus...
- Mon Apr 08, 2024 5:27 pm
- Forum: General Discussion Forum
- Topic: Highland Green?
- Replies: 17
- Views: 690
Re: Highland Green?
A paint source (colors don't always show correctly on computer screens)
https://www.autocolorlibrary.com/pages/1927-Ford.html
https://youtu.be/Qqnp-JBko0Y
https://www.autocolorlibrary.com/pages/1927-Ford.html
https://youtu.be/Qqnp-JBko0Y
- Mon Apr 08, 2024 5:07 pm
- Forum: General Discussion Forum
- Topic: An other dumb distributor question
- Replies: 9
- Views: 742
Re: An other dumb distributor question
There's another way too The 'DIY' >>> https://mtfctulsa.com/Tech/distributors.htm
Renovating a Period Correct Distributor
Renovating a Period Correct Distributor
- Mon Apr 08, 2024 4:56 pm
- Forum: General Discussion Forum
- Topic: Tar for coil potting
- Replies: 16
- Views: 636
Re: Tar for coil potting
A solar flare hit me & was wondering if silicone casting material would be a good choice for filling a coil unit. Its non-conductive and would be easy to remove later if needed be. It could be applied in two sessions like making a mold, to make it even easier to remove. Tar was about the only soluti...
- Mon Apr 08, 2024 3:11 pm
- Forum: General Discussion Forum
- Topic: Eclipse near sandusky, Ohio
- Replies: 16
- Views: 983
Re: Eclipse near sandusky, Ohio
We just saw the total eclipse and now it’s lighting up. Took about 3 minutes. It’s a neat and amazing view. It’s now 1:40 CST as I’m writing this. One of the local stations covering it said it was a fast 4 min and it was! And a few months for the buildup. Life goes on. Didn't Henry initially say "A...
- Mon Apr 08, 2024 1:53 am
- Forum: General Discussion Forum
- Topic: Highland Green?
- Replies: 17
- Views: 690
Re: Highland Green?
I used Valspar Hunter Green of these buckets. Had some Rustoleum Hunter Green in a spray can that was a shade darker than the Valspar
Cameras & individual computer screens render colors slightly different. But the Headlights displayed on my computer screen match to the real ones
Cameras & individual computer screens render colors slightly different. But the Headlights displayed on my computer screen match to the real ones
- Mon Apr 08, 2024 1:19 am
- Forum: General Discussion Forum
- Topic: Highland Green?
- Replies: 17
- Views: 690
Re: Highland Green?
From the Forum's Encyclopedia
Other sources
--Other sources
- Sun Apr 07, 2024 10:38 pm
- Forum: Classifieds - Parts
- Topic: FS Macbeth round Healight Lenses
- Replies: 6
- Views: 1494
Re: FS Macbeth round Healight Lenses
bump..........
- Sun Apr 07, 2024 4:31 pm
- Forum: General Discussion Forum
- Topic: King Pins
- Replies: 25
- Views: 1047
Re: King Pins
I have a freshly rebuilt front axel that has the wrong spindles (early ones). I had not idea there were different spindles and as "Murphy's Law" took over my wooden wheels don't go one far enough. Can I "re-use" the King Pins or do I need new ones? Since you show having a 1915, 1923 & a 1927 which ...
- Sat Apr 06, 2024 1:52 pm
- Forum: General Discussion Forum
- Topic: I need a battery
- Replies: 17
- Views: 1033
Re: I need a battery
...Lithium ion batteries seem wonderful right up until you see how many of them catch fire and can't be extinguished... Not all lithium-based batteries are the same and should not be confused for each other. I suggest that, when looking for replacement lithium vehicle batteries, you consider LiFePO...
- Sat Apr 06, 2024 1:19 pm
- Forum: General Discussion Forum
- Topic: Fan Belt and Oil questions
- Replies: 7
- Views: 525
Re: Fan Belt and Oil questions
Everyone has their preference with good results. Engine modifications also affect selection. The original Ford specification was for a "light" oil, which has been equated to Today's 20w. One factor in selecting the "engine oil" is that it is also used by the transmission, often referred to as a wet ...
- Sat Apr 06, 2024 12:50 pm
- Forum: General Discussion Forum
- Topic: Generator not charging
- Replies: 9
- Views: 456
Re: Generator not charging
Honestly, there are so many things that can go awry inside that generator it's crazy. It's quite easy to take out of the car. To fully inspect it, you really need to do so. Once it's out, you can jump your 6v battery to it and see if it turns like a motor. If not, then something is broken inside. I...
- Fri Apr 05, 2024 12:20 am
- Forum: General Discussion Forum
- Topic: I need a battery
- Replies: 17
- Views: 1033
Re: I need a battery
What's the going wisdom about 6 volt batteries these days? Lots of motorcycle collectors I know are transitioning to lithium batteries, Light, leakproof, work well in warm weather, etc. Is there a good lithium option? My worry is that a regular lead-acid unit will just not take kindly to my sporadi...
- Thu Apr 04, 2024 3:48 pm
- Forum: General Discussion Forum
- Topic: New-ish guy
- Replies: 13
- Views: 700
Re: New-ish guy
Hi all. I've been lurking here for a while now, reading and learning. I inherited a '25 Touring car back in 1999 when my dad passed away. He had bought it as a retirement project, then burned out on it before he even retired, leaving it driveable, but only partially assembled. All the parts are the...
- Thu Apr 04, 2024 1:36 pm
- Forum: General Discussion Forum
- Topic: Rusty pan
- Replies: 14
- Views: 835
Re: Rusty pan
Has anyone successfully use a rust encapsulating paint on the inside of a engine pan to deal with surface rust? Rather than sandblasting? I hate trying to get sand out of tight places so they don't end up in the finished engine. Tanks. Craig. The level of rust may dictate a solution. There are prod...
- Wed Apr 03, 2024 6:57 pm
- Forum: General Discussion Forum
- Topic: 25 Touring radiator shell-nickel or black
- Replies: 10
- Views: 511
Re: 25 Touring radiator shell-nickel or black
From the MTFCA Encyclopedia RADIATORS 1924 (Introduced about July 1923) Higher radiator. Outer shell now had a skirt at the bottom, over engine mount area. 1924-1926 Some flat tube radiators used during this period. Beginning in late 1925 an optional brass, nickel-plated, shell was offered . During ...
- Wed Apr 03, 2024 6:45 pm
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 916
Re: WTB Steering Column for 1912
From the MTFCA Encyclopedia STEERING COLUMN 1909-1910 3500 (T900). (Cars under 34,600, December 19, 1910) 50” long. Brass gear housing was a riveted assembly with the column fitting. Brass quadrant. Levers brass-plated with black hard-rubber knobs. The pitman arm was oval in cross-section, and short...
- Wed Apr 03, 2024 12:19 pm
- Forum: General Discussion Forum
- Topic: Anybody knows a Henry Carter, KY?
- Replies: 4
- Views: 591
Re: Anybody knows a Henry Carter, KY?
Can't you return his money through eBay? I've done at least partial refunds through eBay. You must use eBay to do the refund since the money transfers all go trough eBay now. Thy act like a consignment store. Buyer pays them, they take their commission and pay you whats left over. See attachment Bi...
- Tue Apr 02, 2024 2:29 am
- Forum: General Discussion Forum
- Topic: What engine oil should I avoid
- Replies: 20
- Views: 826
Re: What engine oil should I avoid
If you have or intended to have the Magneto - you do not want any "additive" in the oil that is conductive. Graphite or zinc as can short out the mag post. There are always discussion about detergent & non-detergent oil & resulting slug build up. If you have never dropped the inspection cover on the...
- Sat Mar 30, 2024 1:38 pm
- Forum: General Discussion Forum
- Topic: How to install Rocky Mountain Brake linings
- Replies: 2
- Views: 236
Re: How to install Rocky Mountain Brake linings
instructions for adding the brakes
--
discussions on the linings
viewtopic.php?t=9253
https://www.mtfca.com/discus/messages/1 ... 1279998740
instructions for the Brake Equalizer
----
discussions on the linings
viewtopic.php?t=9253
https://www.mtfca.com/discus/messages/1 ... 1279998740
- Sat Mar 30, 2024 1:21 pm
- Forum: General Discussion Forum
- Topic: Did 26/27 frame have gas tank bracket holes?
- Replies: 6
- Views: 429
Re: Did 26/27 frame have gas tank bracket holes?
Frame flow chart (to read it better either down load the PDF (save it too) or click on the image & then the + ) https://www.mtfca.com/discus/messages/822076/Model_T_Frame_Identification_Chart_V2-356806-873486.pdf Frame chat bottom.png --- --- From the MTFCA Encyclopedia Frame Manufacturers Michigan ...
- Fri Mar 29, 2024 6:36 pm
- Forum: General Discussion Forum
- Topic: 1927 Gas filter
- Replies: 14
- Views: 751
Re: 1927 Gas filter
Snyders indicated a Model A part number A-9155-RK try Mikes or other model a part suppliers https://www.mikes-afordable.com/product/A9155RK.html filter a.png -- Try Gaslight https://gaslightauto.storesecured.com/items/model-a-parts/cowl~fuel-tank/a-9155-rk-detail.htm gaslight.png -- Early Ford' $8.9...
- Thu Mar 28, 2024 7:39 pm
- Forum: Classifieds - Parts
- Topic: WTB: Webbjay gauge for stewart warner vacuum tank
- Replies: 1
- Views: 241
- Thu Mar 28, 2024 7:25 pm
- Forum: Classifieds - Parts
- Topic: WTB Hub Caps
- Replies: 10
- Views: 565
Re: WTB Hub Caps
Perhaps Indiana Jones can help find them...
- Thu Mar 28, 2024 4:06 pm
- Forum: Classifieds - Parts
- Topic: WTB Hub Caps
- Replies: 10
- Views: 565
- Thu Mar 28, 2024 1:41 pm
- Forum: General Discussion Forum
- Topic: Wire wheel ID
- Replies: 7
- Views: 641
Re: Wire wheel ID
The first picture - does that wheel have front wheel brakes?
--
These are likely Model T since they are in a pile of T parts. But the one wheel has some rather large holes for studs
--
--
These are likely Model T since they are in a pile of T parts. But the one wheel has some rather large holes for studs
--
- Thu Mar 28, 2024 1:19 pm
- Forum: Classifieds - Parts
- Topic: WTB Hub Caps
- Replies: 10
- Views: 565
Re: WTB Hub Caps
I stumbled across this link https://www.mtfca.com/discus/messages/257047/318070.html?1351042041 ROBERT BERGSTADT October 30, 2012 Just dug out all the spinning and stamping dies, thank you for all your interest they are going up for sale. I know this is not the place to sell them just letting the pe...
- Thu Mar 28, 2024 1:54 am
- Forum: General Discussion Forum
- Topic: Heater?
- Replies: 12
- Views: 963
Re: Heater?
The plus on the exhaust manifold is that it not prone to warp but check the threads The ARVIN on eBay https://www.ebay.com/itm/134990497521?itmmeta=01HT1RNAJX9KRGAGG7DF5C63F9&hash=item1f6e0f86f1:g:JEoAAOSwp9Fl28tE&itmprp=enc%3AAQAJAAAAwDo3F6iMi%2FOF3YLaMPj%2B86oDEvh18g9wMx2Ge0nxx97XSIhih31F9YzxE95dN...
- Thu Mar 28, 2024 1:19 am
- Forum: General Discussion Forum
- Topic: Holley G Rebuild
- Replies: 10
- Views: 444
Re: Holley G Rebuild
Some instructions by Stan Howe
Step by step rebuild instruction for Holley G from Model T Ford Fix Authored by Royce Peterson
Rebuilding a Holley Model G Carburetor https://modeltfordfix.com/rebuilding-a- ... arburetor/
--Step by step rebuild instruction for Holley G from Model T Ford Fix Authored by Royce Peterson
Rebuilding a Holley Model G Carburetor https://modeltfordfix.com/rebuilding-a- ... arburetor/
- Wed Mar 27, 2024 7:00 pm
- Forum: General Discussion Forum
- Topic: PayPal
- Replies: 15
- Views: 802
Re: PayPal
I sell stuff & prefer PayPal to friends & family, because check transactions take more time & rick in the mail. And if I don't know the buyer another week for the check to clear. If someone wants to use PayPal "Goods & Services" I'll just add 3% (because my PayPal is not a Business) to the total and...
- Wed Mar 27, 2024 6:31 pm
- Forum: General Discussion Forum
- Topic: 12 Volt reading on my 6 volt ammeter
- Replies: 10
- Views: 594
Re: 12 Volt reading on my 6 volt ammeter
Its is my understanding that the amperage output of an alternator is dependent upon its rated current output, rotational speed & the demand placed upon it from the cars electrical system. In other words it would not output more amps then placed upon it. So some calculation can be made battery, coils...
- Wed Mar 27, 2024 4:08 pm
- Forum: General Discussion Forum
- Topic: PayPal
- Replies: 15
- Views: 802
Re: PayPal
Hey fellow T people. I am trying to buy something for my 1916 Touring. I am offering his asking price but he will only accept "friends and family " payment. What are the advantages or disadvantages for me? Campbell Tellman II Beaufort, NC Dan is correct - "Friends & Family" provides no protection. ...
- Wed Mar 27, 2024 3:21 pm
- Forum: Classifieds - Parts
- Topic: WTB front plate distributor
- Replies: 11
- Views: 745
Re: WTB front plate distributor
what does the Atwater Kent plate look like? Good description https://www.mtfca.com/discus/messages/822076/920884.html?1544454327 There was one on eBay a few days ago -https://www.ebay.com/itm/266737873284?itmmeta=01HT0P2GPXD350E3S356FHG5MM&hash=item3e1ad0f184:g:k18AAOSw8I9mAdJk&itmprp=enc%3AAQAJAAA...
- Wed Mar 27, 2024 2:26 pm
- Forum: Classifieds - Parts
- Topic: Dome light switch WTB
- Replies: 6
- Views: 378
Re: Dome light switch WTB
Yours is a 1915 Push/Pull Headlight switchKenny Edmondson wrote: ↑Wed Mar 27, 2024 1:50 pmHard to tell exactly from the pictures, but do the pictures below look anything like the switch you’re looking for? If the bezel is separate, I don’t have it. If there is no bezel then this probably isn’t correct…
- Wed Mar 27, 2024 12:44 pm
- Forum: General Discussion Forum
- Topic: Has anyone ever driven their T across the Mighty Mac?
- Replies: 30
- Views: 1453
Re: Has anyone ever driven their T across the Mighty Mac?
Video of driving across the bridge :shock: https://www.google.com/search?q=mighty+mac+toll&client=firefox-b-1-d&sca_esv=79ced4a93b7e85b0&ei=hkYEZs6aIf-kptQPsqWLkAg&ved=0ahUKEwjO9Ynp65SFAxV_kokEHbLSAoIQ4dUDCBA&uact=5&oq=mighty+mac+toll&gs_lp=Egxnd3Mtd2l6LXNlcnAiD21pZ2h0eSBtYWMgdG9sbDIFECEYoAEyBRAhGKA...
- Tue Mar 26, 2024 12:50 pm
- Forum: General Discussion Forum
- Topic: Soldering a T gas tank
- Replies: 29
- Views: 2697
Re: Soldering a T gas tank
Stan The air in a tank sitting in the sun will pretty much just warm up. After following Brent's great instructions, hook up a vacuum cleaner backwards to blow air through the tank. Works just like compressed air. DAVE, Or sneak you 'lady's' electric hair dryer out of the house and into the garage;...
- Tue Mar 26, 2024 12:38 pm
- Forum: General Discussion Forum
- Topic: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
- Replies: 88
- Views: 3746
Re: Is a 1911 Built With Many NonOriginal Parts Worthy of Being Here?
Adding fuel to the fire... Provenance - the history of the car, ownership & modifications made - is what validates its correctness & originality. The correct parts per car don't define originality (as made it came off the assembly line) only correctness (as Ford would have built it). -- Unless one (...
- Tue Mar 26, 2024 11:48 am
- Forum: General Discussion Forum
- Topic: Soldering a T gas tank
- Replies: 29
- Views: 2697
Re: Soldering a T gas tank
Think we need to put the arguments on repairing a gas tank in the proper perspective. As stated, several times, the danger of an explosion is the presence of fumes in the tank not in the method of repair. So the amount of heat applied better not be equal to the flashpoint of the vapor present. -- Fr...
- Mon Mar 25, 2024 1:17 am
- Forum: General Discussion Forum
- Topic: Capacitors
- Replies: 3
- Views: 497
Re: Capacitors
Read this https://byjus.com/physics/capacitor-types/
It explains these types
Ceramic Capacitors
Film Capacitors
Power Film Capacitors
Electrolytic Capacitors
Ceramic capacitors
Film capacitors
Paper Capacitors
Electrolytic capacitors
It explains these types
Ceramic Capacitors
Film Capacitors
Power Film Capacitors
Electrolytic Capacitors
Ceramic capacitors
Film capacitors
Paper Capacitors
Electrolytic capacitors
- Sun Mar 24, 2024 7:05 pm
- Forum: General Discussion Forum
- Topic: American Bosch front plate distributor information
- Replies: 32
- Views: 2642
Re: American Bosch front plate distributor information
Frank I actually have the 3rd one listed on eBay on a watch list. I always wonder if they will still work. Kevin Thanks this is exactly what I was thinking with the driven nut modification. It’s a wonder it doesn’t come this way. Bryant You don't need to wonder- just plan on replacing the coil - ma...
- Sun Mar 24, 2024 6:56 pm
- Forum: General Discussion Forum
- Topic: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
- Replies: 19
- Views: 864
Re: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
Use plain plate glass, just like original. Easy to cut to a round circle. Don't use tempered glass, you cannot cut it, the tempering will make the glass shatter. Don't use laminate safety either the plastic film between the glass will cause reflections and will distort and craze with heat of the ga...
- Sun Mar 24, 2024 6:03 pm
- Forum: General Discussion Forum
- Topic: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
- Replies: 19
- Views: 864
Re: Has Anyone Tried Laminated Glass for Acetylene Headlight Lenses?
If your looking for something stronger Tempered Glass: It is a type of heat-resistant glass that has been treated at high temperatures to make it extra strong. This makes it safer and more durable than regular glass, as it can withstand impacts and other physical shocks without breaking. It’s also r...
- Sun Mar 24, 2024 5:47 pm
- Forum: Classifieds - Parts
- Topic: WTB Raydex Light diffuser
- Replies: 8
- Views: 727
Re: WTB Raydex Light diffuser
I have a 1921 T The differences in electric headlight buckets are how they are mounted on the car: fork, fender support arm (subtle bracket differences), or fender brace. Also the adjustment position screw 6 vs 9 o'clock. Rim finish 1915 Brass, then Black then Nickle (1926-27). The lens changes fro...
- Sun Mar 24, 2024 3:35 pm
- Forum: General Discussion Forum
- Topic: American Bosch front plate distributor information
- Replies: 32
- Views: 2642
Re: American Bosch front plate distributor information
Kevin Thanks for the info about the drive nut modification. I wasn’t sure about the washer until I saw the picture with one in line. Frank Thanks for the extra information on parts with numbers. I would love to find that AB coil somewhere. Getting closer Bryant There are two different American Bosc...
- Sun Mar 24, 2024 1:45 pm
- Forum: Classifieds - Parts
- Topic: FS Macbeth round Healight Lenses
- Replies: 6
- Views: 1494
Re: FS Macbeth round Healight Lenses
bump still available
- Sun Mar 24, 2024 12:24 pm
- Forum: General Discussion Forum
- Topic: American Bosch front plate distributor information
- Replies: 32
- Views: 2642
Re: American Bosch front plate distributor information
Iam looking for any information related to the American Bosch front plate distributor. Parts books, installation information and the like. 48CD81C0-7475-4D03-BA7A-8D5FB5EFA56F.jpeg this is a type T448 that I have obtained. Any help is much appreciated. Bryant Forgot I had this - 1923boschmaginstman...
- Sun Mar 24, 2024 10:18 am
- Forum: Classifieds - Parts
- Topic: WTB Raydex Light diffuser
- Replies: 8
- Views: 727
Re: WTB Raydex Light diffuser
Yes the ones above are mine and for sale
They are the early flat style so the eyebrow is flat not bulged out. early lens are round & use a different rim style clips than H lens. have them too
- Sun Mar 24, 2024 12:10 am
- Forum: Classifieds - Parts
- Topic: FS Distributor (Reeder?) w/Bosch German VW
- Replies: 7
- Views: 658
- Sun Mar 24, 2024 12:07 am
- Forum: Classifieds - Parts
- Topic: FS Reader Distributor on eBay $$$
- Replies: 0
- Views: 257
FS Reader Distributor on eBay $$$
Not Mine - says "new" & $595 no pictures of what's under the cap. Seller has a few other model T parts https://www.ebay.com/itm/325845048270?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=325845048270&targetid=1645685074248&device=c&mktype=pla&googleloc=9021923&poi=&camp...
- Sat Mar 23, 2024 10:05 am
- Forum: General Discussion Forum
- Topic: bakelite repair
- Replies: 5
- Views: 585
Re: bakelite repair
Looks like an epoxy will work (Kwick Poly is no longer made) https://www.google.com/search?client=fi ... ir+baklite
So look for one that sets up black to match.
JB Weld & Gorilla Glue also have been used see internet link
So look for one that sets up black to match.
JB Weld & Gorilla Glue also have been used see internet link
- Fri Mar 22, 2024 11:41 pm
- Forum: General Discussion Forum
- Topic: Refurbishing Steering Wheel
- Replies: 13
- Views: 820
Re: Refurbishing Steering Wheel
I read this including the 3 previous archived posts, I did not see what material was used to fix cracks, maybe I missed it. George I used Flex Steel Paste to restore a 1913-22 switch base that was made of hard rubber. It blended in so well you cant tell & its hard. It may not be the best product to...
- Fri Mar 22, 2024 12:36 pm
- Forum: General Discussion Forum
- Topic: Refurbishing Steering Wheel
- Replies: 13
- Views: 820
Re: Refurbishing Steering Wheel
Does anyone have any tips on refurbishing the old rubber black steering wheels? Mine has some cracks and is generally worn looking. Try these https://www.mtfca.com/discus/messages/80257/89564.html?1240573989 https://www.mtfca.com/discus/messages/179374/200802.html?1301421083 https://www.mtfca.com/d...
- Thu Mar 21, 2024 3:27 pm
- Forum: General Discussion Forum
- Topic: New York to San Francisco via Lincoln Highway
- Replies: 34
- Views: 2494
Re: New York to San Francisco via Lincoln Highway
Across from the Art Institute of Chicago - E. Adams Street and Michigan Avenue https://www.google.com/maps/place/Walgreens/@41.8796034,-87.6244337,3a,30y,275.78h,92.38t/data=!3m6!1e1!3m4!1sZhGLusA72qOmxuXJEeTf2Q!2e0!7i16384!8i8192!4m15!1m8!3m7!1s0x880e2ca3ee4cdd99:0x6bf5397d3b5ea2bd!2sMichigan+Ave+%...
- Thu Mar 21, 2024 1:21 pm
- Forum: General Discussion Forum
- Topic: Coil tar/bitumen removal
- Replies: 9
- Views: 614
Re: Coil tar/bitumen removal
Use your gas grill outside. don't need the tar smell inside
- Thu Mar 21, 2024 1:07 pm
- Forum: General Discussion Forum
- Topic: balancing beads
- Replies: 19
- Views: 1116
Re: balancing beads
Video of balancing beads inside the tire in action. They put a mini mini camera inside the tire
you'll need to wait abit to skip over the ads https://www.youtube.com/watch?v=_7CghNsdGbk
you'll need to wait abit to skip over the ads https://www.youtube.com/watch?v=_7CghNsdGbk
- Wed Mar 20, 2024 7:01 pm
- Forum: General Discussion Forum
- Topic: New York to San Francisco via Lincoln Highway
- Replies: 34
- Views: 2494
Re: New York to San Francisco via Lincoln Highway
They put up a sign on a pole NE corner of 42nd & BroadwayCharlie B in N.J. wrote: ↑Thu Oct 12, 2023 10:08 pmWonder if they ever put up that plaque on the building in N.Y. City where the highway was supposed to start? Somewhere in Times Square I think?
https://en.wikipedia.org/wiki/Lincoln_Highway
--
- Wed Mar 20, 2024 6:43 pm
- Forum: General Discussion Forum
- Topic: Coil tar/bitumen removal
- Replies: 9
- Views: 614
Re: Coil tar/bitumen removal
By Erik Barrett in Auburn Ca. on Monday, September 17, 2018 - 09:43 pm:
Put them in the freezer overnight and the tar becomes brittle. You can chip it out with a small hammer and chisel.
https://www.mtfca.com/discus/messages/8 ... 1537338755
Put them in the freezer overnight and the tar becomes brittle. You can chip it out with a small hammer and chisel.
https://www.mtfca.com/discus/messages/8 ... 1537338755
- Wed Mar 20, 2024 6:40 pm
- Forum: General Discussion Forum
- Topic: brake lever gets stuck when put forward
- Replies: 3
- Views: 337
Re: brake lever gets stuck when put forward
check it out. Picture of where it get stuck would be best
- Wed Mar 20, 2024 4:05 pm
- Forum: Classifieds - Parts
- Topic: WTB: WIDE-TRACK PARTS, Drag-Link
- Replies: 5
- Views: 483
Re: WTB: WIDE-TRACK PARTS, Drag-Link
If we had one how would we know?
Not sure if everyone knows how to identify one in their stash.
Not sure if everyone knows how to identify one in their stash.
- Wed Mar 20, 2024 12:47 pm
- Forum: General Discussion Forum
- Topic: What can I use for the sealer for the 27 sediment bowl
- Replies: 16
- Views: 790
Re: What can I use for the sealer for the 27 sediment bowl
* Contains PTFE * OEM-specified * Standard applications: stainless steel fittings, head bolts into through holes, oil psi sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings * Motorcycle applications: timing hole plug and oil hose fittings * He...
- Wed Mar 20, 2024 10:52 am
- Forum: General Discussion Forum
- Topic: What can I use for the sealer for the 27 sediment bowl
- Replies: 16
- Views: 790
Re: What can I use for the sealer for the 27 sediment bowl
Are you installing an original cast iron Ford script sediment bulb/valve? Yellow Teflon tape is what you use for gasoline fittings as long as the threads are sharp and not damaged or pitted, otherwise, use the pipe dope. Just be sure it will stand up to gasoline. For a sure seal, feel free to use b...
- Tue Mar 19, 2024 6:46 pm
- Forum: General Discussion Forum
- Topic: Dedicated Pre-War swap meet section at established meet in Duncan, Oklahoma 49 miles south of Chickasha You interested?
- Replies: 41
- Views: 2727
Re: Dedicated Pre-War swap meet section at established meet in Duncan, Oklahoma
Will vinegar kill chiggers? This hack works because chiggers hate the smell of vinegar, so it will repel them from the area. Rather than going towards the scent, they will run in the opposite direction. It's actually an effective bug repellent in general — it can also keep away ants, fruit flies, an...
- Tue Mar 19, 2024 2:20 am
- Forum: General Discussion Forum
- Topic: Demounting a tire
- Replies: 12
- Views: 679
Re: Demounting a tire
It took me over an hour and a half to demount one freaking tire today. Its been on the car for close to 15 years and to make matters worse back when I put that tire and tube together back 15 years ago I used a flap. What PI freaking TA. Me and flaps are officially done, Never ever again. I had to r...
- Tue Mar 19, 2024 1:58 am
- Forum: General Discussion Forum
- Topic: Dedicated Pre-War swap meet section at established meet in Duncan, Oklahoma 49 miles south of Chickasha You interested?
- Replies: 41
- Views: 2727
Re: Pre-War swap meet in Oklahoma???
Swap meets are suffering from the same illness that Shopping Malls had/have, "Internetitis". Another factor plaguing Pre-war Swap meets is the diminishing number of pre-war buyers. Shopping Malls were the places that offered many stores selling similar merchandise resulting in a wider selection of i...
- Mon Mar 18, 2024 5:21 pm
- Forum: General Discussion Forum
- Topic: kerosene lamps eliminated in touring cars
- Replies: 8
- Views: 461
- Mon Mar 18, 2024 5:12 pm
- Forum: General Discussion Forum
- Topic: What can I use for the sealer for the 27 sediment bowl
- Replies: 16
- Views: 790
Re: What can I use for the sealer for the 27 sediment bowl
I need to install the sediment bowl to the cowl gas tank, thanks Do not use Teflon tape or sealant for "gas" valves (that's natural gas) If it for gasoline make sure its soft setting and will not harden. There are lots of discussion on how to get the sediment bulb off when stuck. Haven't used it bu...
- Mon Mar 18, 2024 4:57 pm
- Forum: General Discussion Forum
- Topic: Dedicated Pre-War swap meet section at established meet in Duncan, Oklahoma 49 miles south of Chickasha You interested?
- Replies: 41
- Views: 2727
Re: Need your input: What would you reasonably want in a Pre-War swap meet in Oklahoma
So just spitballing here, I’m facing reality that a swap meet around springtime just dedicated to pre-war may not be viable long term but if there were a swap meet where there was a dedicated area & building for pre-war stuff including open air, covered open air & a climate controlled building for ...
- Sun Mar 17, 2024 6:23 pm
- Forum: General Discussion Forum
- Topic: WOW ! Where Did My Post Go ?
- Replies: 8
- Views: 587
Re: WOW ! Where Did My Post Go ?
I had just finished a lengthy reply to Gene French's post on the end of Chickasha. I hit the Enter button to post it and things went crazy. The post about the TV test pattern was there (both above and below my post. Then I backed out to the Discussion Forum topic page and then clicked on Gene's Chi...
- Sun Mar 17, 2024 6:16 pm
- Forum: Classifieds - Parts
- Topic: WTB Texas T VW Distributor
- Replies: 7
- Views: 559
Re: WTB Texas T VW Distributor
From your past discussion you indicated that your distributor" This distributor was Made in China either with the proper lobes never there or almost totally worn off, which is not likely! The bottom bushing was worn excessively, but the top bushing was hardly worn. That shaft is not likely a sold se...
- Sun Mar 17, 2024 4:37 pm
- Forum: General Discussion Forum
- Topic: Chickasha swapmeet ends
- Replies: 28
- Views: 2077
Re: Chickasha swapmeet ends
interesting was too young to know how to use it
- Sun Mar 17, 2024 4:32 pm
- Forum: General Discussion Forum
- Topic: Engine numbers
- Replies: 2
- Views: 205
Re: Engine numbers
What year did they first start stamping engine numbers on the frame? Which side of the frame is correct? From the MTFCA Encyclopedia need to scroll down to answer https://www.mtfca.com/encyclo/C-D.htm#Chassis2 FRAME NUMBERS Accession 94. Walter Fishleigh files. “Motor number was first placed on fra...
- Sun Mar 17, 2024 1:43 am
- Forum: General Discussion Forum
- Topic: Fun Projects Voltage Regulator repair question
- Replies: 12
- Views: 962
Re: Fun Projects Voltage Regulator repair question
Email our Assistant Admin he makes new ones
Assistant WebSite Admin
1921 Model T Touring, 1930 Model A Roadster
Voltage Regulators, Starter & Generator Repair
www.modeltregulators.com
www.modeltstarters.com
Assistant WebSite Admin
1921 Model T Touring, 1930 Model A Roadster
Voltage Regulators, Starter & Generator Repair
www.modeltregulators.com
www.modeltstarters.com
- Sun Mar 17, 2024 1:28 am
- Forum: Classifieds - Parts
- Topic: WTB Raydex Light diffuser
- Replies: 8
- Views: 727
Re: WTB Raydex Light diffuser
Video of what they do https://m.facebook.com/FentonHistoryCenter/videos/raydex-light-filters/903429553574209/ Check this out pair went unsold uin Victoria https://online.doningtonauctions.com.au/m/lot-details/index/catalog/69/lot/13172/LAMP-A-pair-of-1920s-Raydex-brass-half-head-lamp-diffusers These...
- Sat Mar 16, 2024 8:24 pm
- Forum: General Discussion Forum
- Topic: 1919 Under The Hood Wiring Harness Routing
- Replies: 9
- Views: 362
Re: 1919 Under The Hood Wiring Harness Routing
One of my winter projects is to replace the wiring harnesses on my '19 touring. I started installing the timer / generator harness & put it back in the same spot as the old harness that I removed. I wasn't sure how to rout the wires along the frame so I searched the interweb for some pictures. The ...