Search found 138 matches
- Sat Mar 30, 2024 8:08 am
- Forum: General Discussion Forum
- Topic: Capacitor
- Replies: 21
- Views: 1402
Re: Capacitor
Morning, I have had a chance to go back and recheck the capacitor on a strobo spark and following the instructions found that the capacitor were fine. The proper way to test the capacitor is by putting a piece of paper between upper and lower contact. I then adjusted all of them to draw 1.2 amps, wi...
- Thu Mar 28, 2024 7:48 am
- Forum: General Discussion Forum
- Topic: Capacitor
- Replies: 21
- Views: 1402
Re: Capacitor
thanks for all the replies, it came down to following directions. I need to put a piece of paper between the contacts.
Again thanks
Fitz
Again thanks
Fitz
- Wed Mar 27, 2024 2:29 pm
- Forum: General Discussion Forum
- Topic: Capacitor
- Replies: 21
- Views: 1402
Capacitor
I have a question about capacitors, I had some coils rebuilt in 2020 and I had thought it would be a good idea to check them on a strobo spark and have 3 of them that have capacitor that have failed according to the strobo spark. My question is why would I this happen with 4 year old rebuild coils. ...
- Sat Mar 23, 2024 8:01 am
- Forum: General Discussion Forum
- Topic: bakelite repair
- Replies: 5
- Views: 583
bakelite repair
Morning from snowy Vermont, I need to repair a broken piece of bakelite from the bottom of my coil box switch base. I am wonder what would be the best adhesive would be to use.
Thanks
Fitz
Thanks
Fitz
- Wed Nov 08, 2023 2:35 pm
- Forum: Classifieds - Parts
- Topic: FS- NORS Ruckstell P206 Shift Rod Support
- Replies: 16
- Views: 936
Re: FS- NORS Ruckstell P206 Shift Rod Support
Dan if you have any more left I would like to buy one also
Fitz
Fitz
- Mon Oct 09, 2023 5:38 pm
- Forum: General Discussion Forum
- Topic: Exhaust manifold help
- Replies: 6
- Views: 484
Re: Exhaust manifold help
I appreciate the suggestion and photos of how to get my manifold set-up.
Ralph
Ralph
- Sun Oct 08, 2023 8:59 pm
- Forum: General Discussion Forum
- Topic: Exhaust manifold help
- Replies: 6
- Views: 484
Exhaust manifold help
I have Roof overhead and am trying to build an exhaust manifold. The problem is that the third exhaust port is tight to the plywood firewall. Any suggestions would be great.
Thanks
Thanks
- Sat Sep 23, 2023 5:45 pm
- Forum: Classifieds - Parts
- Topic: WTB Type III roofing tar
- Replies: 4
- Views: 395
Re: WTB Type III roofing tar
Rich I also like some just let me know how much to cover your cost and postage
Fitz
Fitz
- Wed Sep 20, 2023 6:59 am
- Forum: General Discussion Forum
- Topic: Traverse City
- Replies: 4
- Views: 459
Re: Traverse City
Thanks for letting me know
Fitz
Fitz
- Tue Sep 19, 2023 9:08 pm
- Forum: General Discussion Forum
- Topic: Traverse City
- Replies: 4
- Views: 459
Traverse City
Got a phone call from my daughter this morning tell me of a line of Model T going thru traverse City. Is one of the local clubs have a tour in that area?
Fitz
Fitz
- Wed Jun 28, 2023 7:22 am
- Forum: General Discussion Forum
- Topic: Stan’s OF Book?
- Replies: 3
- Views: 602
Re: Stan’s OF Book?
I would also like to get a copy of his book
Fitz
Fitz
- Sun Jan 29, 2023 7:22 am
- Forum: Classifieds - Parts
- Topic: For Sale: Wards Riverside Spark Plugs
- Replies: 2
- Views: 745
Re: For Sale: Wards Riverside Spark Plugs
I would like to buy them.
Ralph
Ralph
- Sat Jan 07, 2023 7:44 am
- Forum: General Discussion Forum
- Topic: Timing Cover Alignment Tool for 1912
- Replies: 9
- Views: 1006
Re: Timing Cover Alignment Tool for 1912
Just curious as to why a later timer alignment tool wouldn’t work?
Ralph
Ralph
- Mon Dec 12, 2022 5:33 pm
- Forum: Classifieds - Parts
- Topic: WTB
- Replies: 5
- Views: 907
WTB
I am looking for a piece of 3/4” brass tubing about 18” in length. This for my speedster to hold the ignition wires.
Thanks
Ralph
Thanks
Ralph
- Sun Nov 20, 2022 12:00 pm
- Forum: General Discussion Forum
- Topic: Roadster body question
- Replies: 5
- Views: 854
Re: Roadster body question
Thanks Scott for the quick reply I think I will have to you some small nuts and bolts instead of rivets. Scott were the planks screw down or nailed
Thanks
Thanks
- Sun Nov 20, 2022 8:10 am
- Forum: General Discussion Forum
- Topic: Roadster body question
- Replies: 5
- Views: 854
Roadster body question
I am working on 20 roadster and at the back of the body there is apiece of sheet metal that looks to be bolted together. I was wondering what type of bolts would of been used there?
Thanks
Ralph
Thanks
Ralph
- Wed Nov 09, 2022 9:21 am
- Forum: General Discussion Forum
- Topic: Christmas has arrived early
- Replies: 0
- Views: 648
Christmas has arrived early
Just received the my fronty Water manifold from Kevin. What a nice job looking forward to installing on my speedster
- Thu Oct 27, 2022 10:17 am
- Forum: General Discussion Forum
- Topic: New LED bulbs for Miss Molly, my 23 Coupe
- Replies: 29
- Views: 2895
Re: New LED bulbs for Miss Molly, my 23 Coupe
I have them in my 15 touring and really like the way they light up. They were easy to install.
Fitz
Fitz
- Sun Oct 23, 2022 8:25 am
- Forum: General Discussion Forum
- Topic: Exhaust gasket
- Replies: 1
- Views: 493
Exhaust gasket
I am looking for source of exhaust manifold gasket for a Roof liberty 8 overhead. The exhaust ports are 11/2”also could use a recommendation for exhaust manifold material so I can make my own.
Thanks
Ralph
Thanks
Ralph
- Sat Oct 15, 2022 1:45 pm
- Forum: Classifieds - Parts
- Topic: WTB Ruckstell
- Replies: 2
- Views: 679
WTB Ruckstell
WTB a Ruckstel shifting lever, I have the all of the of the other parts.
Thanks
Fitz
Thanks
Fitz
- Sun Oct 09, 2022 8:14 am
- Forum: Classifieds - Parts
- Topic: FS TIMERS
- Replies: 7
- Views: 1022
Re: FS TIMERS
Mark I would like number 7
Ralph
Ralph
- Fri Sep 30, 2022 6:13 pm
- Forum: General Discussion Forum
- Topic: Kevlar band
- Replies: 10
- Views: 1523
Re: Kevlar band
Thanks for all of the suggestion. This transmission was fully rebuilt new bushing, new jack rabbit clutch, new clutch spring, and the lists goes on. I have gone back and check the bands and look for anything that show excess wear. There is nothing in the transmission screen. This weekend is our annu...
- Fri Sep 30, 2022 6:08 pm
- Forum: General Discussion Forum
- Topic: led taillight
- Replies: 9
- Views: 1101
led taillight
I know there has been a lot of discussion about led head light for model t but, has any one found one for a 15 taillight?
thank
thank
- Sun Sep 18, 2022 6:01 pm
- Forum: General Discussion Forum
- Topic: Kevlar band
- Replies: 10
- Views: 1523
Kevlar band
I am have a problem with my 15 touring car not being able to pull a hill when I step on the low speed pedal. The motor and transmission were completely rebuilt . The car has kevlar bands and is possible that the low speed band has glazeover.
Thanks
Thanks
- Mon Aug 22, 2022 4:45 pm
- Forum: General Discussion Forum
- Topic: Fronty water manifold
- Replies: 39
- Views: 5497
Re: Fronty water manifold
Kevin,
I would also like to be put on the list for a manifold
Ralph
I would also like to be put on the list for a manifold
Ralph
- Thu Jun 16, 2022 1:55 pm
- Forum: General Discussion Forum
- Topic: Miller heads
- Replies: 33
- Views: 4486
Re: Miller heads
I would like one also. I agree with the previous post that lettering on the head would be great
Ralph
Ralph
- Tue Jun 07, 2022 12:49 pm
- Forum: Classifieds - Parts
- Topic: Sold …..Nice set of floor plates / draft deflector FOR SALE
- Replies: 2
- Views: 577
Re: Nice set of floor plates / draft deflector FOR SALE
I will take these. How would you like to get paid
Ralph
Ralph
- Tue Jun 07, 2022 12:47 pm
- Forum: Classifieds - Parts
- Topic: Pedal plates fs. 11-15. Sold
- Replies: 2
- Views: 584
Re: Pedal plates fs. 11-15
I will take them. How would you like to get paid.
Ralph
Ralph
- Mon Apr 11, 2022 12:20 pm
- Forum: General Discussion Forum
- Topic: Fitting pedal trim
- Replies: 6
- Views: 1614
Re: Fitting pedal trim
Thanks for the information the pedal trim is for a 22 model t roadster
Fitz
Fitz
- Sat Apr 09, 2022 3:29 pm
- Forum: General Discussion Forum
- Topic: Fitting pedal trim
- Replies: 6
- Views: 1614
Fitting pedal trim
I have been working on getting the pedal trim to fit properly. Before I do something that I will regret, I thought I ask for some help
Fitz
Thanks Fitz
- Sat Apr 02, 2022 10:10 am
- Forum: Classifieds - Parts
- Topic: For Sale - Miscellaneous Brass Era Parts
- Replies: 8
- Views: 1592
Re: For Sale - Miscellaneous Brass Era Parts
I liked the Sediment Bulb, New Reproduction 12-27 - $50
Thanks
Fitz
Thanks
Fitz
- Fri Mar 18, 2022 9:10 am
- Forum: General Discussion Forum
- Topic: What have you done on your Model T in March?
- Replies: 47
- Views: 6108
Re: What have you done on your Model T in March?
My wife and I are visiting family in Dayton this weekend and we had yesterday free so we took a trip over to the Model T Ford Museum. What wonderful place, I donated a set of transmission reamer for display or use in the work shop. I meet and a nice conversation with Rachel Executive Director what t...
- Wed Feb 23, 2022 9:08 pm
- Forum: General Discussion Forum
- Topic: Miller head update
- Replies: 5
- Views: 1550
Re: Miller head update
Let me check tomorrow
Fitz
Fitz
- Sat Feb 19, 2022 8:45 am
- Forum: Classifieds - Parts
- Topic: wtb trim set
- Replies: 0
- Views: 580
wtb trim set
I am looking for emergency brake lever trim and pedal trim set for a 1920 roadster
Thanks
Fitz
Thanks
Fitz
- Sat Feb 12, 2022 8:05 am
- Forum: Classifieds - Parts
- Topic: FS: 3 in 1 unit distributor, water pump, oil pump
- Replies: 8
- Views: 2012
Re: FS: 3 in 1 unit distributor, water pump, oil pump
What a great find.
- Tue Feb 08, 2022 12:35 pm
- Forum: OT - Off topic
- Topic: air compressor
- Replies: 3
- Views: 1442
air compressor
I am looking to buy a new vertical air compressor for my shop and wonder if any one here on the forum has had any experience with California air compressor. This compressor run pretty quiet. Let me know the good bad or your experience with is brand
Thanks
Fitz
Thanks
Fitz
- Sun Feb 06, 2022 8:11 am
- Forum: General Discussion Forum
- Topic: model t snowmobile
- Replies: 3
- Views: 1299
Re: model t snowmobile
The Model Snowmobiled Club really had a super turn out yesterday in Waterbury. The are
received a foot plus of fresh snow. The meet continues today
received a foot plus of fresh snow. The meet continues today
- Wed Feb 02, 2022 9:25 pm
- Forum: General Discussion Forum
- Topic: model t snowmobile
- Replies: 3
- Views: 1299
model t snowmobile
Just to what to on pass that The Model t snowmobile Club is hold there winter Meeting in Waterbury Vt. This weekend at the Farr Field just north of the village of Waterbury. I have include the link to the Model T snowmobile club for more information. Should be a good weekend with fresh snow. www.mod...
- Mon Jan 31, 2022 2:36 pm
- Forum: General Discussion Forum
- Topic: exhaust repair
- Replies: 1
- Views: 919
exhaust repair
I have a roof liberty eight exhaust manifold that the thread are pretty thin looking for options, weld on a replacement end taken from a regular ford manifold or something else?
thanks
Ralph
thanks
Ralph
- Mon Jan 31, 2022 12:16 pm
- Forum: General Discussion Forum
- Topic: Overhead installation
- Replies: 13
- Views: 2437
Re: Overhead installation
Gentleman thanks for the reply with good information. Now I have a few questions. Richard what year ford did you make the wooden fire wall for? Speedy I have learned that once changes dictates 10 more. Were there any changes to how the pedals and hand lever came thru the floor boards? Henry the Roof...
- Tue Jan 25, 2022 11:12 am
- Forum: General Discussion Forum
- Topic: Overhead installation
- Replies: 13
- Views: 2437
Overhead installation
I have an Roof Overhead that I what to install in 1920 roadster. I know need to cut the firewalls and I am looking for suggestions
Thanks
Thanks
- Thu Jan 06, 2022 9:48 am
- Forum: Classifieds - Parts
- Topic: FS Macbeth Headlight Lens - NOS
- Replies: 3
- Views: 1297
Re: FS Macbeth Headlight Lens - NOS
I will take them if they are still available
Fitz
Fitz
- Fri Dec 10, 2021 10:32 am
- Forum: General Discussion Forum
- Topic: Miller
- Replies: 0
- Views: 844
Miller
Any news on how the new Miller cylinder head is coming along?
Fitz
Fitz
- Mon Nov 29, 2021 7:26 am
- Forum: General Discussion Forum
- Topic: body weight
- Replies: 7
- Views: 1754
Re: body weight
Dan thanks for find the information on the weight of the roadster body.
Fitz
Fitz
- Tue Nov 23, 2021 8:17 am
- Forum: General Discussion Forum
- Topic: body weight
- Replies: 7
- Views: 1754
body weight
I am looking for a approximate weight of a 1920 roadster body including wooden platform that it is mounted on.
Thanks
Fitz
Thanks
Fitz
- Tue Nov 23, 2021 7:24 am
- Forum: Classifieds - Parts
- Topic: FS Earl & Late Engine Supports, AirBurners, Spade Tail light
- Replies: 10
- Views: 2274
Re: FS Ford Script, Engine Support, AirBurners, Spade Tail light
I would Number 2 ford script
Ralph
Ralph
- Fri Oct 01, 2021 9:30 pm
- Forum: Classifieds - Parts
- Topic: FS Runabout Shaped Set of T Parts - With Pictures
- Replies: 3
- Views: 1534
Re: FS Runabout Shaped Set of T Parts - With Pictures
I have sent you a pm
Ralph
Ralph
- Tue Jul 20, 2021 6:53 pm
- Forum: General Discussion Forum
- Topic: Balance Beads - Wooden Wheels
- Replies: 6
- Views: 1404
Re: Balance Beads - Wooden Wheels
I have them in my 15 touring car for the last 4-5 years and they real have improve drive ability.
- Thu May 06, 2021 6:19 am
- Forum: Classifieds - Vehicles
- Topic: 1912 Model T Boat Tail Speedster
- Replies: 18
- Views: 8369
- Mon Mar 22, 2021 5:09 pm
- Forum: Classifieds - Parts
- Topic: Intake Manifolds
- Replies: 3
- Views: 1330
Re: Intake Manifolds
Bill I will take the single if is still available
Fitz
Fitz
- Mon Mar 01, 2021 5:56 pm
- Forum: Classifieds - Parts
- Topic: Wtb
- Replies: 0
- Views: 716
Wtb
Looking for couple of 1/8 fuel shut off. I need 1/8 pipe thread male on one end and the other end accept 1/8 farel.
Thanks Fitz
Thanks Fitz
- Wed Feb 10, 2021 4:57 pm
- Forum: General Discussion Forum
- Topic: Cracked Engine Block
- Replies: 18
- Views: 3377
Re: Cracked Engine Block
Give Pat Musante of Pats restoration a call he did my engine, and can help you figure out wants needs to be done. Here is his contact information
203-556-4119
pmusante17@gmail.com
Fitz
203-556-4119
pmusante17@gmail.com
Fitz
- Sat Jan 09, 2021 7:12 pm
- Forum: General Discussion Forum
- Topic: What have you done with your T in January?
- Replies: 56
- Views: 7959
Re: What have you done with your T in January?
I removed the gas tank from the touring car. It has developed some weeping on the bottom where the sediment bowl attaches. I found a repair shop near me that is willing to fix the weeping area I also removed the right front fender and pounded out a dent that I put in 30 years ago.
Fitz
Fitz
- Sat Jan 09, 2021 6:51 pm
- Forum: General Discussion Forum
- Topic: fender undercoating
- Replies: 3
- Views: 1091
fender undercoating
I have to repaint the bottoms of the fender on my 15 touring car. I was wonder what other folks have done, not looking for a show car finish. I drive a lot of dirt and gravel roads here in Vt.
Thanks
Fitz
Thanks
Fitz
- Sat Jan 09, 2021 4:55 pm
- Forum: Classifieds - Parts
- Topic: undercoat
- Replies: 2
- Views: 1038
undercoat
I have to repaint the bottoms of the fender on my 15 touring car. I was wonder what other folks have done, not looking for a show car finish. I drive a lot of dirt and gravel roads here in Vt.
Thanks
Fitz
Thanks
Fitz
- Tue Jan 05, 2021 8:44 pm
- Forum: General Discussion Forum
- Topic: Nov./Dec. Vintage Ford
- Replies: 58
- Views: 7748
Re: Nov./Dec. Vintage Ford
Not here in Vt. yet
- Sat Jan 02, 2021 8:12 am
- Forum: General Discussion Forum
- Topic: Happy New Year! What are you planning to do on your Ts this year?
- Replies: 15
- Views: 2746
Re: Happy New Year! What are you planning to do on your Ts this year?
Looking to clean up the undersides of my fender. Just wondering what would be a good product to use. I drive on a lot of dirt roads. I am also looking at replace the gas tank also, notice it is starting to weep.
Fitz
Fitz
- Sat Dec 26, 2020 9:03 pm
- Forum: Classifieds - Parts
- Topic: WTB: 4 dip inspection cover and horseshoes
- Replies: 5
- Views: 1692
Re: WTB: 4 dip inspection cover and horseshoes
I am also looking for 4 dip inspection cover with the horseshoes bolt retainers. Chad you have first choice .
Fitz
Fitz
- Thu Dec 24, 2020 1:31 pm
- Forum: General Discussion Forum
- Topic: sure mike cranks
- Replies: 27
- Views: 4403
Re: sure mike cranks
Joe I have a sure mike crank in my 15 touring, that my father found in a junk yard back in early 60'. He had it clean up and it has been the car ever since. The motor was rebuilt by Pat's restoration a couple of years ago. It does help with the vibration and smooth out the engine.
Fitz
Fitz
- Wed Dec 09, 2020 6:05 pm
- Forum: General Discussion Forum
- Topic: Leather hood lacing
- Replies: 2
- Views: 900
Leather hood lacing
I just got replacement leather hood lacing and they are long enough for my 15 touring. What my dad put in there many years ago was cotton webbing. Any one have a recommendation on where to by 6-7 ft x 1" of cotten webbing.
Thanks
Fitz
Thanks
Fitz
- Sun Nov 22, 2020 4:19 pm
- Forum: Classifieds - Parts
- Topic: New price
- Replies: 1
- Views: 901
New price
Both transmission wrenches for $30 plus postage
Fitz
Fitz
- Sat Nov 21, 2020 7:59 pm
- Forum: Classifieds - Parts
- Topic: Transmission ban wrenches
- Replies: 0
- Views: 843
Transmission ban wrenches
I have for sale two model t transmission band tools for sale plus postage.
Fitz
Fitz
- Sat Nov 07, 2020 8:11 am
- Forum: General Discussion Forum
- Topic: Need a recommendation
- Replies: 5
- Views: 1785
Re: Need a recommendation
Thanks, John for the recommendation. R.V. I did reached out to Maine Radiator company and they do not do repairs but did give a couple of names to check out.
Thanks Again
Fitz
Thanks Again
Fitz
- Fri Nov 06, 2020 11:31 am
- Forum: General Discussion Forum
- Topic: Need a recommendation
- Replies: 5
- Views: 1785
Re: Need a recommendation
thanks for the find I will give them a call.
Fitz
Fitz
- Thu Nov 05, 2020 8:12 pm
- Forum: General Discussion Forum
- Topic: Need a recommendation
- Replies: 5
- Views: 1785
Need a recommendation
I am looking for someone in the northeast who has experience in repair brass radiators. I have a fairly new brass radiator that need some soldering repair
Thanks
Fitz
Thanks
Fitz
- Sun Nov 01, 2020 12:34 pm
- Forum: General Discussion Forum
- Topic: Coils
- Replies: 3
- Views: 1630
Coils
Just got back these back Erik Larson, 5 brass coils all refreshed and ready for next years touring season. This my second set done by Erik. He used the ECCT.
Fitz
Fitz
- Tue Oct 13, 2020 5:30 pm
- Forum: Classifieds - Parts
- Topic: Z tools
- Replies: 2
- Views: 1051
Re: Z tools
Z tools have been sold to Larry.
- Tue Oct 13, 2020 3:35 pm
- Forum: Classifieds - Parts
- Topic: Z tools
- Replies: 2
- Views: 1051
Z tools
I have 4 z tools for sale. They have a bit of rust. $30 plus postage.
Fitz
Fitz
- Sun Aug 23, 2020 11:44 am
- Forum: General Discussion Forum
- Topic: 1915 Tudor Sedan
- Replies: 4
- Views: 1308
1915 Tudor Sedan
I was going thru my father collection of old Model T literature and photos and found this photo I would like to share.
- Sat Jul 04, 2020 12:21 pm
- Forum: General Discussion Forum
- Topic: Engine Re-builder Recommendations in the New Jersey Area
- Replies: 3
- Views: 1905
Re: Engine Re-builder Recommendations in the New Jersey Area
Pats Restoration in Conn.
- Mon Jun 22, 2020 7:19 am
- Forum: Classifieds - Parts
- Topic: Wanted To Buy: Exhaust Pack Nut Wrench
- Replies: 4
- Views: 2180
Re: Wanted To Buy: Exhaust Pack Nut Wrench
pm sent to you
Fitz
Fitz
- Wed Jun 17, 2020 8:14 pm
- Forum: General Discussion Forum
- Topic: Thanks
- Replies: 3
- Views: 1909
Thanks
Just what to give a big thanks to Tim Wrenn. I had a problem getting my Rocky Mt. Brakes adjusted properly Tim offer to walk me thru my problem,and with in 15 min ,he had it figured out what was wrong. With in 15 min, I had made the adjustment and now have brakes. So I would like to thank everyone w...
- Tue Jun 16, 2020 5:56 pm
- Forum: General Discussion Forum
- Topic: Rocky Mt. Brakes
- Replies: 1
- Views: 1274
Rocky Mt. Brakes
I have trouble getting my relined RMB adjusted properly. I wa wonder if some could post installation instruction and adjusting.
Thanks
Fitz
Thanks
Fitz
- Tue Jun 02, 2020 8:55 pm
- Forum: General Discussion Forum
- Topic: Recommendations for rebuilding coils
- Replies: 18
- Views: 5980
Re: Recommendations for rebuilding coils
I had Erik Larson do mine with ecct.
Fitz
Fitz
- Sun May 31, 2020 9:15 pm
- Forum: Classifieds - Parts
- Topic: Speedster seats
- Replies: 2
- Views: 1797
Re: Speedster seats
Seats have been sold
- Sun May 31, 2020 5:16 pm
- Forum: Classifieds - Parts
- Topic: Speedster seats
- Replies: 2
- Views: 1797
Speedster seats
I have for sale two wicker speedster seats. The the wicker is in good shape. The leather trim will need to be replaced. I am asking $200 for the pair plus postage.
- Sun May 17, 2020 8:19 pm
- Forum: Classifieds - Parts
- Topic: FS -My latest Model T Ford parts/price list -is ready
- Replies: 27
- Views: 8055
Re: FS -My latest Model T Ford parts/price list -is ready
I post the wrong email. Let try tfitz_gerald@hotmail.com
Fitz
Fitz
- Sun May 17, 2020 8:50 am
- Forum: General Discussion Forum
- Topic: Thanks
- Replies: 1
- Views: 1476
Thanks
I received this week another one of Stan's restored OF carburetor. It a pleasure to know that when the carburetor is ready to put on the car.
Fitz
Fitz
- Sun May 17, 2020 7:29 am
- Forum: Classifieds - Parts
- Topic: FS -My latest Model T Ford parts/price list -is ready
- Replies: 27
- Views: 8055
- Sun May 10, 2020 12:13 pm
- Forum: Classifieds - Parts
- Topic: LF stromberg carburetor
- Replies: 3
- Views: 1802
Re: LF stromberg carburetor
Here is a photo of the four carbs
- Sun May 10, 2020 12:03 pm
- Forum: Classifieds - Parts
- Topic: LF stromberg carburetor
- Replies: 3
- Views: 1802
Re: LF stromberg carburetor
New price $125 plus postage
- Sat May 09, 2020 7:57 pm
- Forum: Classifieds - Parts
- Topic: LF stromberg carburetor
- Replies: 3
- Views: 1802
LF stromberg carburetor
I have for sale 4 LF stromberg carburetor for sale,$150 plus postage.
Fitz
Fitz
- Sat May 02, 2020 7:21 am
- Forum: General Discussion Forum
- Topic: Rocky Mt Brakes
- Replies: 1
- Views: 1328
Rocky Mt Brakes
I am looking for the phone number for the Rocky MT brake Company.
Thanks
Fitz
Thanks
Fitz
- Thu Apr 30, 2020 10:21 am
- Forum: Classifieds - Parts
- Topic: Bosch points
- Replies: 2
- Views: 1582
Re: Bosch points
I would like to buy two sets. i will email you this evening.
Fitzx
Fitzx
- Mon Apr 27, 2020 9:02 pm
- Forum: General Discussion Forum
- Topic: Rocky mt Brakes
- Replies: 3
- Views: 1949
Re: Rocky mt Brakes
Henry and Mark thanks for your response. Henry I thought about and a shim on the back side of brake band. The shim would not move the band nearly enough. The band has to be move about a 1/4" toward the wheel. Mark you are correct the band is little under an 1/8" wider than the band. The bands came f...
- Sun Apr 26, 2020 10:03 pm
- Forum: General Discussion Forum
- Topic: Rocky mt Brakes
- Replies: 3
- Views: 1949
Rocky mt Brakes
I am having problems with aligning the front half of the brake band with the wheel hub on my ford. I just reline the brakes bands and did not change any thing else. I have included two photo, I hope they show the problem I am having. Thanks for the help.
Fitz
Fitz
- Sun Apr 12, 2020 4:39 pm
- Forum: General Discussion Forum
- Topic: Nos find
- Replies: 3
- Views: 2243
Re: Nos find
Keith, no it does not have a metal stem.
Fitz
Fitz
- Sun Apr 12, 2020 12:03 pm
- Forum: General Discussion Forum
- Topic: Nos find
- Replies: 3
- Views: 2243
Nos find
[image][/image]While cleaning out the bottom of my Father barn I found two nos Ward Riverside tires. In one of the tires I found this Wards inner tube. The tires and tube must of been under the barn for at least 40 years. The tires are a bit stiff and the inner tube has several splits where it was f...
- Sun Apr 12, 2020 11:26 am
- Forum: Classifieds - Parts
- Topic: Exhaust wrench
- Replies: 0
- Views: 1288
Exhaust wrench
For sale Z# 5-Z-2C4 exhaust wrench. $50 plus postage.
Fitz
Fitz
- Sun Mar 15, 2020 6:54 pm
- Forum: General Discussion Forum
- Topic: Where & how much to lighten flywheel?
- Replies: 12
- Views: 4392
Re: Where & how much to lighten flywheel?
Kevin this all got when I bought my speedster.
Fitz
Fitz
- Sun Mar 15, 2020 5:46 pm
- Forum: General Discussion Forum
- Topic: Where & how much to lighten flywheel?
- Replies: 12
- Views: 4392
Re: Where & how much to lighten flywheel?
Here are two photo of my cut down flywheel. The diameter of the flywheel is about 10".
Fitz
Fitz
- Sun Mar 15, 2020 7:49 am
- Forum: General Discussion Forum
- Topic: Where & how much to lighten flywheel?
- Replies: 12
- Views: 4392
Re: Where & how much to lighten flywheel?
Chris I have a cut down fly wheel in the barn. I will try and get some photos and measurement and post them later today.
Fitz
Fitz
- Sun Mar 01, 2020 5:52 pm
- Forum: Classifieds - Parts
- Topic: For sale
- Replies: 4
- Views: 2662
Re: For sale
Sold pending payment
- Sun Mar 01, 2020 1:15 pm
- Forum: Classifieds - Parts
- Topic: For sale
- Replies: 4
- Views: 2662
For sale
I have for sale 6 issues of Flyod Clymer books. $30 for all 6 plus postage
Thanks
Fitz
Thanks
Fitz
- Sat Feb 29, 2020 7:15 am
- Forum: Classifieds - Parts
- Topic: Books for sale
- Replies: 3
- Views: 1943
Re: Books for sale
Tin Lizzy is still for sale
Fitz
Fitz
- Thu Feb 27, 2020 8:21 pm
- Forum: Classifieds - Parts
- Topic: Books for sale
- Replies: 3
- Views: 1943
Re: Books for sale
Books 1,3,and 4 are sold pending payment.
- Thu Feb 27, 2020 5:53 pm
- Forum: Classifieds - Parts
- Topic: Books for sale
- Replies: 3
- Views: 1943
Books for sale
I have for sale the follow books $10 ea plus postage
Today and Tomorrow
Henry Ford Engineer
Tin Lizze
Henry Wonderful Model T
Fitz
Today and Tomorrow
Henry Ford Engineer
Tin Lizze
Henry Wonderful Model T
Fitz
- Tue Feb 25, 2020 7:51 pm
- Forum: Classifieds - Parts
- Topic: For sale timer
- Replies: 0
- Views: 1284
For sale timer
I have for sale 2 Bell timers. If you what to try and use tip his timer they will have to be rewired. I do not have the brush assembly but I think a brush assembly for a New Day timer may work. $15 plus postage.
Fitz
Fitz
- Tue Feb 25, 2020 7:41 pm
- Forum: Classifieds - Parts
- Topic: For sale books
- Replies: 0
- Views: 1256
For sale books
I have for sale a copy of The Dust and The Glory, Racing Story , $35 plus postage. The second book is Forty Years 1903-1943 Ford Motor Company. This book also has the original dust cover, $35 plus postage
Fitz
Fitz
- Sun Feb 16, 2020 11:54 am
- Forum: Classifieds - Parts
- Topic: For sale model t combeination testers
- Replies: 4
- Views: 2380
Re: For sale model t combeination testers
New price $50 plus postage for both.
Fitz
Fitz