Kim
If you have another left, please hold it for me.
Daniel Snell. danielsnell2@twc.com
Search found 449 matches
- Sat Nov 04, 2023 11:26 pm
- Forum: Classifieds - Parts
- Topic: FS 3 original copies of the Model T Service book
- Replies: 9
- Views: 655
- Fri Sep 08, 2023 7:58 am
- Forum: General Discussion Forum
- Topic: What's the Secret to a Quiet T?
- Replies: 25
- Views: 1332
Re: What's the Secret to a Quiet T?
The noise I am experiencing comes from the exhaust pipe area or perhaps the muffler. Although it is not super loud as if something was seriously wrong, it is much louder than other cars. I have tightened the exhaust manifold nut and changed out my exhaust pipe and muffler purchased from the vendors...
- Thu Sep 07, 2023 6:14 pm
- Forum: General Discussion Forum
- Topic: What's the Secret to a Quiet T?
- Replies: 25
- Views: 1332
What's the Secret to a Quiet T?
What is the secret to a quiet running T? I recently had notice that my friend's T was way quieter than mine, but he could not tell me why. Can someone enlighten us folks that would like to not hear so much noise coming from the exhaust pipe area? Even when I replaced my exhaust pipe and muffler on ...
- Sun Aug 27, 2023 8:56 am
- Forum: General Discussion Forum
- Topic: Speedometer Help Needed
- Replies: 3
- Views: 453
Re: Speedometer Help Needed
Thanks Mark. Would you happen to have a photo or two of this mount being used?
- Sat Aug 26, 2023 2:07 pm
- Forum: General Discussion Forum
- Topic: Speedometer Help Needed
- Replies: 3
- Views: 453
Speedometer Help Needed
I am seeking help in mounting the speedometer swivel mount to the right front of my 1924 Touring car. The attached photo shows the assembled mount I am using parts. The Stewart parts #11296 and 11295 photo attached that I have are shown on page 64 of Russ Furstnow's speedometer book. They were corr...
- Sun Jun 04, 2023 6:35 pm
- Forum: Classifieds - Vehicles
- Topic: 25 unrestored touring fs. Sold
- Replies: 9
- Views: 3545
Re: 25 unrestored touring fs
Is this still available?
- Wed May 24, 2023 4:00 pm
- Forum: Classifieds - Parts
- Topic: FS: Early /Touring Door Latch…
- Replies: 5
- Views: 675
Re: FS: Early /Touring Door Latch…
George, what year car are they correct for?
- Wed May 03, 2023 12:33 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
- Replies: 7
- Views: 1967
Re: FOR SALE: Spare tire carrier for 26-27 pick up T Truck
Will this fit a 25 pickup with 30 inch tires?
- Sun Mar 26, 2023 9:40 pm
- Forum: General Discussion Forum
- Topic: Enclosed Car Trailer Optimal Size
- Replies: 11
- Views: 1109
Enclosed Car Trailer Optimal Size
I am wanting to purchase an Enclosed trailer to haul a single Model T Touring and am looking for some advise on what the size enclosed trailer one should use. I want to be able to go in and out with the top up with a 1924 Touring Car that has a height of about 7 feet and a 1909 that is about 7 foot...
- Wed Feb 22, 2023 10:25 am
- Forum: Classifieds - Parts
- Topic: Parts for sale
- Replies: 4
- Views: 944
Re: Parts for sale
Kim, I am sending you an email about the brass hub fan. Thanks
- Sun Feb 19, 2023 4:44 pm
- Forum: Classifieds - Parts
- Topic: Early wishbone cap 1909 1911 F/S
- Replies: 1
- Views: 470
Re: Early wishbone cap 1909 1911 F/S
Email sent
- Tue Feb 07, 2023 4:55 am
- Forum: Classifieds - Parts
- Topic: NOS Triple Gear Set & Driven Gear SOLD
- Replies: 2
- Views: 712
Re: NOS Triple Gear Set & Driven Gear
Email sent
- Sun Feb 05, 2023 9:59 pm
- Forum: Classifieds - Parts
- Topic: Attention! Dan Snell!
- Replies: 1
- Views: 651
Re: Attention! Dan Snell!
Larry,
I just got your message, I'm out at my ranch where connection is poor. I'll call you tomorrow. Thanks
Dan
I just got your message, I'm out at my ranch where connection is poor. I'll call you tomorrow. Thanks
Dan
- Sat Feb 04, 2023 9:36 pm
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
Re: WTB - Brake Rods 1920-1925
Thank you, I just ordered them. I always prefer Ford originals but they decent ones don't appear to be out there.
- Sun Jan 29, 2023 8:06 pm
- Forum: Classifieds - Parts
- Topic: Speedometer drive with cable
- Replies: 2
- Views: 731
Re: Speedometer drive with cable
Hi Larry,
What year is that off of?
I'm in need of a cable and housing for my 1924 Touring. Tell me the length of the housing and the condition of the drive and cable. I may be able to use it.
Thanks Dan
What year is that off of?
I'm in need of a cable and housing for my 1924 Touring. Tell me the length of the housing and the condition of the drive and cable. I may be able to use it.
Thanks Dan
- Sun Jan 29, 2023 8:41 am
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
Re: WTB - Brake Rods 1920-1925
Still looking!
- Fri Jan 27, 2023 10:24 am
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
Re: WTB - Brake Rods 1920-1925
still looking.
- Thu Jan 26, 2023 12:04 pm
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
Re: WTB - Brake Rods 1920-1925
Frank, thanks for posting the photos, they look a bit rough to me, I am hoping to find some in better condition if they are out there.
- Thu Jan 26, 2023 8:47 am
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
Re: WTB - Brake Rods 1920-1925
Frank, the length would be approximately 54 inches from the end of the threads to the clevis hole where it connects to the brake cam.
- Tue Jan 24, 2023 5:59 pm
- Forum: Classifieds - Parts
- Topic: WTB - Brake Rods 1920-1925
- Replies: 10
- Views: 1211
WTB - Brake Rods 1920-1925
I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You
Daniel Snell
Danielsnell2@twc.com
Daniel Snell
Danielsnell2@twc.com
- Mon Jan 23, 2023 8:19 am
- Forum: General Discussion Forum
- Topic: Brake Rods
- Replies: 13
- Views: 1167
Re: Brake Rods
Thanks guys for all the helpful input. I guess I'll be looking for a good usable pair of original rods 1920 to 1925.
- Sun Jan 22, 2023 8:07 pm
- Forum: General Discussion Forum
- Topic: Brake Rods
- Replies: 13
- Views: 1167
Re: Brake Rods
Here are two additional photos. Thanks guys.
- Sun Jan 22, 2023 6:14 pm
- Forum: General Discussion Forum
- Topic: Brake Rods
- Replies: 13
- Views: 1167
Re: Brake Rods
So the two on the left are the earlier type, Forged?
- Sun Jan 22, 2023 5:02 pm
- Forum: General Discussion Forum
- Topic: Brake Rods
- Replies: 13
- Views: 1167
Brake Rods
I am in the process of hooking up and adjusting the emergency or parking brakes and realized I have differences in the ends of the rods where they attach to the brake cam lever. I am attaching a photo showing the differences. My car is a 1924 Touring and the rods that were on the car are the two on...
- Tue Dec 13, 2022 11:25 pm
- Forum: Classifieds - Parts
- Topic: FS—-> Transmission Drums.
- Replies: 5
- Views: 917
Re: FS—-> Transmission Drums.
Where are you located?
- Wed Sep 21, 2022 7:05 pm
- Forum: General Discussion Forum
- Topic: Our Yellowstone/Jackson trip
- Replies: 21
- Views: 2287
Re: Our Yellowstone/Jackson trip
I was totally blown away when I saw Rich and his Model T in Yellowstone two days ago. We pulled over and I had a nice chat with him. His Tudor ran well, so well in fact that I kept passing him when we pulled over for a quick stop along the way. Thanks Rick, it was great meeting you and your wife. A...
- Fri Jul 22, 2022 9:27 pm
- Forum: Classifieds - Parts
- Topic: clincher wheels and tires
- Replies: 4
- Views: 1202
Re: clincher wheels and tires
Dick, I saw you live in Washington, that would not be possible for me to pick them up and shipping would be crazy, I'm sure. I only wanted to look at them as a possible second set. If you like, please send photos to: Danielsnell2@twc.com
I'll at least see what you have.
Thanks
I'll at least see what you have.
Thanks
- Fri Jul 22, 2022 9:24 am
- Forum: Classifieds - Parts
- Topic: clincher wheels and tires
- Replies: 4
- Views: 1202
Re: clincher wheels and tires
Sent you an email
- Mon Jun 27, 2022 8:40 am
- Forum: Classifieds - Parts
- Topic: Battery Holder
- Replies: 1
- Views: 690
Re: Battery Holder
Hi Matt, can you post the clearance measurements for the battery?
Thanks side to side and front to back
Thanks side to side and front to back
- Sat Jun 25, 2022 8:20 am
- Forum: Classifieds - Parts
- Topic: WTB: 26-27 Steering Column
- Replies: 1
- Views: 581
Re: WTB: 26-27 Steering Column
If your still looking, send me your email and I will send pictures of one I have. DanielSnell2@twc.com
- Wed Jun 01, 2022 10:48 pm
- Forum: Classifieds - Parts
- Topic: Battery carrier
- Replies: 12
- Views: 2039
Re: Battery carrier
At least it should have a width of 7 7/8 to accommodate the steel battery box. If you still have it for sale, please check this measurement, I may be interested. Thank You
- Thu May 26, 2022 5:55 pm
- Forum: Classifieds - Parts
- Topic: Running board brackets fs. / Modified add
- Replies: 4
- Views: 1120
Re: Running board brackets fs
I will take set 4. Sending an email. Thanks
- Tue May 24, 2022 8:36 pm
- Forum: Classifieds - Parts
- Topic: Top Bows
- Replies: 8
- Views: 1645
Re: Top Bows
Email Sent
- Tue May 24, 2022 4:05 pm
- Forum: Classifieds - Parts
- Topic: Battery carrier
- Replies: 12
- Views: 2039
Re: Battery carrier
The steel battery box measures 9 1/2 by 7 3/4" so the dimension side to side needs to be 8 inches to accommodate it. What is the side to side measurement?
- Mon May 23, 2022 11:25 pm
- Forum: Classifieds - Parts
- Topic: Battery carrier
- Replies: 12
- Views: 2039
Re: Battery carrier
Could you please post the measurement of the inside width (side to side) of the carrier? There is a difference between those that were used with the metal battery box. Starting sometime in 1923 the battery bracket changed to part number 5150 B to accommodate the steel battery box. Prior to that, the...
- Thu May 19, 2022 3:34 pm
- Forum: Classifieds - Parts
- Topic: RS late style wishbone
- Replies: 5
- Views: 1356
Re: RS late style wishbone
Hi Kim
I'd like to purchase 2. Let me know the total.
Thanks
Dan Snell
10256 Headwind
Boerne, Tx 78006
I'd like to purchase 2. Let me know the total.
Thanks
Dan Snell
10256 Headwind
Boerne, Tx 78006
- Wed May 04, 2022 8:36 am
- Forum: General Discussion Forum
- Topic: Front Seat Back to Riser Assembly 1917-22
- Replies: 7
- Views: 1191
Re: Front Seat Back to Riser Assembly 1917-22
Marty, that is a nice looking Touring you have there and I also like the name of your beautiful state, "Commiefornia". I used to live there back in the 70's when it was still fairly sane, I could not imagine what it is like now. Anyway, what I am needing to know is how that front seat back attaches...
- Tue May 03, 2022 12:36 am
- Forum: General Discussion Forum
- Topic: Front Seat Back to Riser Assembly 1917-22
- Replies: 7
- Views: 1191
Re: Front Seat Back to Riser Assembly 1917-22
Thanks John and George, I shall do some research to see what I can find.
- Mon May 02, 2022 7:18 pm
- Forum: General Discussion Forum
- Topic: Front Seat Back to Riser Assembly 1917-22
- Replies: 7
- Views: 1191
Front Seat Back to Riser Assembly 1917-22
I am trying to figure how the front seat back attaches to the front seat riser on a 1917 thru 1922 Touring. There are nine holes that go thru bottom of the kick panel then through the bottom of the seat back. They then would hold the bottom tack strip. Could someone post a photo (or email me with o...
- Sat Apr 23, 2022 6:50 am
- Forum: Classifieds - Parts
- Topic: EARL T PARTS
- Replies: 4
- Views: 1948
Re: EARL T PARTS
Herbert
Can you send me photos of your best early T head with description of condition? Thanks
Danielsnell2@twc.com
Can you send me photos of your best early T head with description of condition? Thanks
Danielsnell2@twc.com
- Tue Apr 19, 2022 10:42 pm
- Forum: General Discussion Forum
- Topic: Steering Gear Ball Arm
- Replies: 15
- Views: 2273
Re: Steering Gear Ball Arm
Anyone have a contact for Bill Barth whom Larry Smith indicated used to rebuild the pitman arm ball? Thsnks
- Mon Apr 18, 2022 10:26 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
Thank you all for spending time to help me out, I appreciate you sharing your information.
- Mon Apr 18, 2022 3:55 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
Sorry, forgot to attach
- Mon Apr 18, 2022 3:51 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
Rick D Here are the original 1921 screws/nuts that were removed from this car that I believe to be correct based upon the number I have, size etc. No other quantity of screws/nuts from the original stash fit the pictures sent. Size of these are: 1/4 x 20 x 3/4 and there are 18 of them. I'd like to k...
- Mon Apr 18, 2022 1:39 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
Anyone know about earlier models, I have a 1921, could be different?
- Mon Apr 18, 2022 1:38 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
What size bolt, 1/4 × 20 x 3/4?
- Mon Apr 18, 2022 1:38 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
What size bolt, 1/4 × 20 x 3/4?
- Mon Apr 18, 2022 12:52 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
It's hard to see but it appears like they are slotted head machine screws with square nuts, correct?
- Sun Apr 17, 2022 10:20 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Re: Body Joining Screws 1921 Touring
Thanks Richard, are both sides with the screw head toward the side of the body and are the nuts all square? Just curious as to the method of assembly, perhaps it was somewhat consistent.
- Sun Apr 17, 2022 6:26 pm
- Forum: General Discussion Forum
- Topic: Body Joining Screws 1921 Touring
- Replies: 21
- Views: 2291
Body Joining Screws 1921 Touring
In the process of assembling the body sheet metal together on a 1921 Touring and have a question regarding the joining screws used to attach the rear center sheet metal to the side quarter panels. I would like to know what was used originally (i.e. slotted machine screws 1/4 by 3/4, square nuts). If...
- Thu Apr 14, 2022 4:36 pm
- Forum: Classifieds - Parts
- Topic: WTB - Pitman Arm
- Replies: 5
- Views: 1224
Re: WTB - Pitman Arm
Script pitman arm Found!
Thanks Frank and MTFCA
Thanks Frank and MTFCA
- Wed Apr 13, 2022 3:58 pm
- Forum: Classifieds - Parts
- Topic: WTB - Pitman Arm
- Replies: 5
- Views: 1224
Re: WTB - Pitman Arm
Frank,
Email sent, thanks.
Dan
Email sent, thanks.
Dan
- Tue Apr 12, 2022 2:58 pm
- Forum: Classifieds - Parts
- Topic: WTB - Pitman Arm
- Replies: 5
- Views: 1224
WTB - Pitman Arm
I am in need of a Script pitman arm, part number 3547 with round or near round ball. Thanks
Daniel Snell
210-279-7864
danielsnell2@twc.com
Daniel Snell
210-279-7864
danielsnell2@twc.com
- Tue Apr 12, 2022 12:12 pm
- Forum: General Discussion Forum
- Topic: Steering Gear Ball Arm
- Replies: 15
- Views: 2273
Re: Steering Gear Ball Arm
It is a 1925 RPU. Parts listings show part number 3547 for that year.
- Mon Apr 11, 2022 7:06 pm
- Forum: General Discussion Forum
- Topic: Steering Gear Ball Arm
- Replies: 15
- Views: 2273
Steering Gear Ball Arm
I have a pitman arm ball that measures .965 by .992 is that too out of round to be used successfully? if so, what are the recommendations, go with a repro? Thanks
- Sun Apr 10, 2022 9:33 pm
- Forum: Classifieds - Parts
- Topic: Battery Boxes and lids for sale
- Replies: 7
- Views: 1879
Re: Battery Boxes and lids for sale
What are the outside dimensions of these boxes?
- Tue Apr 05, 2022 7:24 pm
- Forum: Classifieds - Parts
- Topic: Wanted Muffler Straps
- Replies: 9
- Views: 1703
Re: Wanted Muffler Straps
Glad you got one Mike. Here is a photo of the 1909 parts book showing the Muffler Part number 4025 with three straps.
- Sat Feb 26, 2022 2:05 pm
- Forum: Classifieds - Parts
- Topic: FS Stewart speedometer drives
- Replies: 2
- Views: 878
Re: FS Stewart speedometer drives
Kim, when you say RH drive, are you referring to the mounting on the Right front or passenger side wheel? My road gear is on the right front, so would the RH drive be correct for that? Thanks
- Mon Feb 21, 2022 1:38 pm
- Forum: Classifieds - Parts
- Topic: WTB brass carbide generator
- Replies: 5
- Views: 1308
Re: WTB brass carbide generator
I will respond to messages this evening. Thanks
- Sun Feb 20, 2022 9:39 pm
- Forum: Classifieds - Parts
- Topic: WTB brass carbide generator
- Replies: 5
- Views: 1308
Re: WTB brass carbide generator
Larry
I have an E&J all brass unit that is complete if interested, very presentable.
I have an E&J all brass unit that is complete if interested, very presentable.
- Sun Feb 20, 2022 9:28 pm
- Forum: Classifieds - Parts
- Topic: No longer available- FORD MODEL T TOURING ACCESSORY GASOLINE GAUGE NEW OLD STOCK
- Replies: 2
- Views: 1104
- Mon Feb 07, 2022 3:38 pm
- Forum: Classifieds - Parts
- Topic: 2 NOS battery box lids FS
- Replies: 2
- Views: 1044
Re: 2 NOS battery box lids FS
Hi
I'd like[ to get the battery box cover without the inspection plate. Please email me with pic and price. Thanks
DanielSnell2@twc.com/b]
I'd like[ to get the battery box cover without the inspection plate. Please email me with pic and price. Thanks
DanielSnell2@twc.com/b]
- Sat Jan 29, 2022 10:15 pm
- Forum: General Discussion Forum
- Topic: Randall Anderson
- Replies: 65
- Views: 9083
Re: Randall Anderson
I would like to add my name to the long list of persons wishing condolences to the Anderson Family. R V has also helped out me several times including building a set of coils and coil box for my 1909. He was a special person that will not be forgotten.
RIP R.V.
RIP R.V.
- Sat Jan 15, 2022 9:50 am
- Forum: Classifieds - Parts
- Topic: Holley NH center drain carburetor
- Replies: 5
- Views: 1284
Re: Holley NH center drain carburetor
Good info Corey, so for my 1924, which is correct, the long or short arm?
Dan
Dan
- Fri Jan 14, 2022 3:47 pm
- Forum: Classifieds - Parts
- Topic: Holley NH center drain carburetor
- Replies: 5
- Views: 1284
Re: Holley NH center drain carburetor
Corey, can you tell me when the short arm verses the long arm change was made and why?
- Thu Jan 13, 2022 6:24 pm
- Forum: Classifieds - Parts
- Topic: WTB Headlight Reflectors 1923-25
- Replies: 8
- Views: 1963
Re: WTB Headlight Reflectors 1923-25
John,
Yes, I have tried using some liquid silver polish, but they are too far gone for that.
Where in Texas are you John?
Yes, I have tried using some liquid silver polish, but they are too far gone for that.
Where in Texas are you John?
- Wed Jan 12, 2022 10:23 pm
- Forum: Classifieds - Parts
- Topic: WTB Headlight Reflectors 1923-25
- Replies: 8
- Views: 1963
Re: WTB Headlight Reflectors 1923-25
Thanks Mark and Steve, I will give them a try.
- Mon Jan 10, 2022 7:24 am
- Forum: Classifieds - Parts
- Topic: WTB Headlight Reflectors 1923-25
- Replies: 8
- Views: 1963
WTB Headlight Reflectors 1923-25
Does anyone have a pair of Silver Plated headlight reflectors for my 1924 that does not need replating? The vendors seem to sell only the chrome plated version but that is not what Ford used and I just like the look of the silver plate.
- Sun Jan 02, 2022 11:25 pm
- Forum: Classifieds - Parts
- Topic: SOLD Early forged clevises for sale
- Replies: 5
- Views: 1249
Re: Early forged crevices for sale
I'll take the clevis's Tim
Sending an email.
Texas Dan
Sending an email.
Texas Dan
- Fri Dec 31, 2021 9:23 pm
- Forum: General Discussion Forum
- Topic: Front Wheel Dust Seals
- Replies: 7
- Views: 1637
Re: Front Wheel Dust Seals
This is for a 1924 Touring that I have been working on now for three years. Just waiting for a friend to come over and help me put on a new top, everything else is nearly ready. Thanks
- Fri Dec 31, 2021 12:47 am
- Forum: General Discussion Forum
- Topic: Shipping a model T (or two) to Alaska
- Replies: 18
- Views: 2067
Re: Shipping a model T to Alaska
I had an experience shipping a Model T from Texas to Spain a few years ago. You must go through a shipping company and it was like pulling teeth from an elephant to find one but finally settled on Schumacher Cargo. They specialize in shipping antique cars. This was about 7 years ago but it went ver...
- Thu Dec 30, 2021 10:26 pm
- Forum: General Discussion Forum
- Topic: Front Wheel Dust Seals
- Replies: 7
- Views: 1637
Re: Front Wheel Dust Seals
That would explain a lot. I thought they looked different than the original type. Correct me if I am wrong, but the original type (pictured here) just used the felt for a seal. I was mistakenly thinking that the modern neopreme seal would be hidden by the metal original cover. Anyone use the origin...
- Thu Dec 30, 2021 8:52 pm
- Forum: General Discussion Forum
- Topic: Front Wheel Dust Seals
- Replies: 7
- Views: 1637
Front Wheel Dust Seals
I put in this modern inside dust seal but it does not seem adequate. It seems like there should be something additional here as most seals I've seen have a flat outside surface. Like to get input from others on this please. These seals are sold by Lang's so I thought that was all that was needed. S...
- Fri Dec 10, 2021 6:31 pm
- Forum: Classifieds - Parts
- Topic: New Item
- Replies: 7
- Views: 2408
Re: New Item
Hi RV ,
I received my set today, thanks. Check is going out tomorrow. Thanks for sending.
Dan
I received my set today, thanks. Check is going out tomorrow. Thanks for sending.
Dan
- Tue Dec 07, 2021 1:25 pm
- Forum: Classifieds - Parts
- Topic: Holley NH center drain carburetor
- Replies: 2
- Views: 910
Re: Holley NH center drain carburetor
Hi Corey
What year did the short/long arm throttle arm change and why. First I've heard about it
What year did the short/long arm throttle arm change and why. First I've heard about it
- Thu Dec 02, 2021 9:51 pm
- Forum: Classifieds - Parts
- Topic: New Item
- Replies: 7
- Views: 2408
Re: New Item
Hi R.V., does your price include shipping to the lower 48? I'd like to get a set for my '24. Thanks
- Sun Nov 21, 2021 3:26 pm
- Forum: Classifieds - Parts
- Topic: SOLD, T odds and ends
- Replies: 2
- Views: 954
Re: For Sale, T odds and ends
I'll take it. Send me your pay pal contact. Thanks
Daniel Snell
10256 Headwind
Boerne Tx 78006
Daniel Snell
10256 Headwind
Boerne Tx 78006
- Thu Nov 11, 2021 11:56 am
- Forum: Classifieds - Parts
- Topic: 1923-5 Door Handle Trim
- Replies: 7
- Views: 1605
Re: 1923-5 Door Handle Trim
Those panels appear to have the earlier hinges which would be for 1924 and earlier. Probably 1923-24, I guess because the panels do not have the extra horizontal trim band through the center of the doors that I understand was used '22 and earlier.
- Thu Nov 11, 2021 9:36 am
- Forum: Classifieds - Parts
- Topic: 1923-5 Door Handle Trim
- Replies: 7
- Views: 1605
Re: 1923-5 Door Handle Trim
Rich
Do you know what those panels came off, what year?
Do you know what those panels came off, what year?
- Mon Nov 08, 2021 8:38 pm
- Forum: Classifieds - Parts
- Topic: 1923-5 Door Handle Trim
- Replies: 7
- Views: 1605
Re: 1923-5 Door Handle Trim
Has anyone tried Langs or Snyder trim sets on 25 or earlier?
- Fri Nov 05, 2021 9:36 pm
- Forum: Classifieds - Parts
- Topic: 1923-5 Door Handle Trim
- Replies: 7
- Views: 1605
1923-5 Door Handle Trim
I am looking for a supplier or anyone that has the metal trim that goes around the door handles on the open cars (see attached photo). This is for a 1924 Ford Touring but I suspect it was used over many years. Any input is welcome here as Classtique does not furnish this trim in their kits. Please ...
- Wed Oct 27, 2021 7:12 pm
- Forum: General Discussion Forum
- Topic: Old Photo - Some Hard Use at Bryce Canyon
- Replies: 5
- Views: 1559
Old Photo - Some Hard Use at Bryce Canyon
During a recent trip to Bryce Canyon in Utah we stopped by Ruby's just outside the park. There on the wall was this gorgeous photo of what appears to be either a Model T station wagon or TT that has seen some hard use carrying sightseers into the canyon a few miles away back in 1923. Perhaps some o...
- Thu Oct 14, 2021 12:24 am
- Forum: Classifieds - Parts
- Topic: Battery Box
- Replies: 39
- Views: 4989
Re: Battery Box
Miles, 1921-24 did have a metal box part number 5158 and a cover part number 5159 according to the March 1924 Parts listing. I believe the box and cover were also used up through 1927 as well. My 1924 was acquired in 1986 and never had a box either, but I am restoring back to original as much as pra...
- Tue Oct 12, 2021 11:37 am
- Forum: Classifieds - Parts
- Topic: WTB: ‘25 Pickup Rear Fender Irons
- Replies: 15
- Views: 2183
Re: WTB: ‘25 Pickup Rear Fender Irons
Is anyone making these now?
- Mon Oct 11, 2021 10:39 pm
- Forum: Classifieds - Parts
- Topic: Battery Box
- Replies: 39
- Views: 4989
Re: Battery Box
Larry,
I could use one for my 1924 Touring. Please put me down as well.
Daniel
I could use one for my 1924 Touring. Please put me down as well.
Daniel
- Tue Sep 21, 2021 10:35 am
- Forum: Classifieds - Parts
- Topic: FS Late 23 - 25 High Firewall
- Replies: 1
- Views: 806
Re: FS Late 23 - 25 High Firewall
Hi James,
There are differences between the high 23-24 type and the 25. Can you send me photos please?
Danielsnell2@twc.com
There are differences between the high 23-24 type and the 25. Can you send me photos please?
Danielsnell2@twc.com
- Wed Sep 08, 2021 6:08 pm
- Forum: Classifieds - Parts
- Topic: Items for sale
- Replies: 1
- Views: 1304
Re: Items for sale
Hi Larry,
Can you send me a picture of the step plates, I am curious about them.
Thanks
Dan
Can you send me a picture of the step plates, I am curious about them.
Thanks
Dan
- Sun Sep 05, 2021 12:24 am
- Forum: Classifieds - Parts
- Topic: SOLD! - SPRING LOADED ACCESSORY BRAKE ROD SUPPORTS
- Replies: 1
- Views: 909
Re: FOR SALE - SPRING LOADED ACCESSORY BRAKE ROD SUPPORTS
Hi Jay,
I sent you and email.
I sent you and email.
- Sat Aug 28, 2021 3:45 pm
- Forum: Classifieds - Parts
- Topic: SATURDAY SWAP MEET
- Replies: 6
- Views: 1696
Re: SATURDAY SWAP MEET
Hi Mark,
Put my name on number 6. Will pay with pay pal.
Daniel Snell
Put my name on number 6. Will pay with pay pal.
Daniel Snell
- Mon Aug 16, 2021 7:01 pm
- Forum: OT - Off topic
- Topic: Need Help Identifying Front Fenders
- Replies: 4
- Views: 1696
Re: Need Help Identifying Front Fenders
Kevin, I just studied several 1924-26 Chevrolet Superior and have concluded that while there are similarities in the fender, the fender skirt is more sweeping and wider on the Chevrolet. Thanks for your suggestion, it is amazing that there were so many similarities in fenders across the spectrum of...
- Sun Aug 15, 2021 12:04 pm
- Forum: OT - Off topic
- Topic: Need Help Identifying Front Fenders
- Replies: 4
- Views: 1696
Re: Need Help Identifying Front Fenders
Anyone out there own a 1924 Buick that could help confirm these fenders? A measurement or two would probably do the trick. The Pics I've seen look like a strong possibility. Thanks
- Wed Aug 11, 2021 2:08 pm
- Forum: OT - Off topic
- Topic: Need Help Identifying Front Fenders
- Replies: 4
- Views: 1696
Need Help Identifying Front Fenders
I had put this up on the Forum then realized it is not Ford related, so am posting this question again here. Had some good responses but no clear evidence as to what they are yet. They do look similar to the Studebaker Big Six. A friend of mine up in Fredericksburg has these two front fenders but d...
- Tue Aug 10, 2021 11:32 pm
- Forum: General Discussion Forum
- Topic: Help Identifying Front Fenders
- Replies: 8
- Views: 2000
Re: Help Identifying Front Fenders
Dan
Any idea what year(s) Studebaker?
Thanks for your help
Any idea what year(s) Studebaker?
Thanks for your help
- Sun Aug 08, 2021 4:53 pm
- Forum: General Discussion Forum
- Topic: Help Identifying Front Fenders
- Replies: 8
- Views: 2000
Help Identifying Front Fenders
A friend of mine up in Fredericksburg has these two front fenders but does not know what model car they belong to. Looks like late twenties something. Can anyone help identify them. They are in solid shape and even have some original paint left. Unknown Fender 1.jpg Unknown Fender 2.jpg Unknown Fen...
- Sat Aug 07, 2021 4:56 pm
- Forum: Classifieds - Parts
- Topic: WTB 1924 Engine
- Replies: 12
- Views: 2924
Re: WTB 1924 Engine
Hi Dennis
Does your block have the Ford script on the side?
Does your block have the Ford script on the side?
- Mon Aug 02, 2021 12:35 am
- Forum: Classifieds - Parts
- Topic: WTB 1924 Engine
- Replies: 12
- Views: 2924
Re: WTB 1924 Engine
Hi George. Does your serial number 11,801,993 happen to have the FORD script on the driver side of the block? Just curious as we are having a debate when that was stopped. Thanks
- Sat Jul 17, 2021 1:19 am
- Forum: Classifieds - Parts
- Topic: Looking for a rebuilt Holley NH Carb for my 1923 Model t
- Replies: 5
- Views: 1399
Re: Looking for a rebuilt Holley NH Carb for my 1923 Model t
Contact Corey at Wlkma9@gmail.com
He'll take care of what you want.
He'll take care of what you want.
- Mon Jul 05, 2021 3:51 pm
- Forum: General Discussion Forum
- Topic: Ford Fathful oiler with exit tube on the left
- Replies: 8
- Views: 1580
Re: Ford Fathful oiler with exit tube on the left
[scott
Are you saying that it would work effectivelygoing out the left?? /size]
Are you saying that it would work effectivelygoing out the left?? /size]
- Sat Jul 03, 2021 6:32 pm
- Forum: General Discussion Forum
- Topic: Throttle Rod Question
- Replies: 1
- Views: 946
Throttle Rod Question
Happy Independence day weekend to all! I have a question regarding the throttle rod running through the block from the steering wheel to the carb. This is on a 1924 model. There is a distinct bend of about 10 degrees a little less than 2 inches from one end. My question is: Does this end go to the ...
- Fri Jun 25, 2021 9:58 am
- Forum: General Discussion Forum
- Topic: If you used Blockley Tubes
- Replies: 21
- Views: 3821
Re: If you used Blockley Tubes
I installed my set with no bridge washer, just the way Blockley shipped them. Additionally I used flaps and had no problem. They seem just fine to me. I trust Blockley researched this out already.