Search found 206 matches
- Mon Apr 15, 2024 6:15 am
- Forum: General Discussion Forum
- Topic: MTFCI 2024 Tour
- Replies: 13
- Views: 651
Re: MTFCI 2024 Tour
I'm glad you're planning on the Cadillac tour. You will be amazed by the people, cars,and the drives. Are you planning on going to the Luray swap meet, and tour. It's close by, and will give you an idea of what to expect in Cadillac. There will be quite a few of us there that will be on the tour.
- Mon Apr 15, 2024 6:07 am
- Forum: General Discussion Forum
- Topic: E-timer
- Replies: 19
- Views: 1663
Re: E-timer
I can't believe that it's been 7 years already. I first met you at Hershey, and became a beta tester for you. We installed the I-Timer at your house, after driving my '14 around the block. The second step was tweeking out a set of coils on the ECCT, and driving around the same block again. We then i...
- Tue Apr 02, 2024 11:22 pm
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 910
Re: WTB Steering Column for 1912
Also, the hole pattern in the lower flange is different.
- Mon Mar 18, 2024 5:22 am
- Forum: General Discussion Forum
- Topic: wood coil box stain and seal
- Replies: 7
- Views: 483
Re: wood coil box stain and seal
Going along with Allan's warning about linseed oil, oil soaked rags have to be disposed of carefully. These rags will self combust spontaneously if not disposed of properly. I would use spar urethane to coat the wood.
- Tue Mar 05, 2024 1:22 pm
- Forum: General Discussion Forum
- Topic: Russ Potters Passing and Arrangements
- Replies: 36
- Views: 2407
Re: Russ Potter
My condolences to the Potter family.
I always made it a point to stop by his spot at Hershey each year. I have about a dozen rebuilt carbs, buying one or two each year. He will be dearly missed.
I always made it a point to stop by his spot at Hershey each year. I have about a dozen rebuilt carbs, buying one or two each year. He will be dearly missed.
- Thu Feb 22, 2024 11:15 pm
- Forum: Classifieds - Parts
- Topic: For Sale: More goodies !
- Replies: 5
- Views: 1024
Re: For Sale: More goodies !
Sent email about rods.
- Wed Feb 07, 2024 3:16 am
- Forum: General Discussion Forum
- Topic: T trailering question
- Replies: 40
- Views: 1983
Re: T trailering question
I've towed my T's with both an open, and an enclosed trailer. I personally like the enclosed trailers better. I know all my parts will be there when I open the door, even if they are on the floor. The enclosed trailer also acts as a "garage" with safe storage. I can usually get a good nights sleep k...
- Tue Jan 23, 2024 9:47 am
- Forum: General Discussion Forum
- Topic: Taree's First Taxi Service - yes it was a Model T!
- Replies: 3
- Views: 400
Re: Taree's First Taxi Service - yes it was a Model T!
Top photo appears to be a '14. The second photo is a late '12.
- Mon Dec 11, 2023 10:00 pm
- Forum: General Discussion Forum
- Topic: American LeFrance factory1919 T photo
- Replies: 5
- Views: 504
Re: American LeFrance factory1919 T photo
The one in the rear is a small chemical truck. Just like the one pictured on William Killen's book.
- Mon Dec 11, 2023 9:54 pm
- Forum: General Discussion Forum
- Topic: American LeFrance factory1919 T photo
- Replies: 5
- Views: 504
Re: American LeFrance factory1919 T photo
The one in the rear is a small chemical truck. You can see the tank installed on the rear.
- Mon Nov 13, 2023 4:56 am
- Forum: Classifieds - Parts
- Topic: WTB Early Pliers, Part No. T 1903
- Replies: 52
- Views: 4661
Re: WTB Early T 1903 Pliers
It really isn't a screwdriver blade, it's more of an inclined plane. I just picked up a pair, but the Ford stamping is more on the handle.
- Mon Oct 30, 2023 6:44 am
- Forum: General Discussion Forum
- Topic: Scam Alert
- Replies: 11
- Views: 1021
Re: Scam Alert
I hope that head was attached to an early engine.
Thanks for the warning.
Thanks for the warning.
- Thu Oct 19, 2023 1:54 pm
- Forum: General Discussion Forum
- Topic: Question on 1913 Windshield
- Replies: 16
- Views: 760
Re: Question on 1913 Windshield
It looks like the top bead should be shaped so as to go around the bolt. My guess is that it is very early and had a '12 style windshield with the brass support rods attached by the radiator.
- Sat Oct 14, 2023 3:23 pm
- Forum: General Discussion Forum
- Topic: Spam Free Photos
- Replies: 6
- Views: 614
Re: Spam Free Photos
I don't think either of them has the "time" to be sending photos. I would consider them spam.
- Wed Oct 11, 2023 2:42 pm
- Forum: Classifieds - Parts
- Topic: Wanted True Fire Ignition Coil Box
- Replies: 9
- Views: 461
Re: Wanted True Fire Ignition Coil Box
Clean ALL the contacts. They don't work if there is any dirt or corrosion.
- Mon Oct 09, 2023 2:13 pm
- Forum: Classifieds - Parts
- Topic: Unknown brackets fs. Sold
- Replies: 4
- Views: 391
Re: Unknown brackets fs
Acetylene tank brackets?
- Fri Oct 06, 2023 2:40 pm
- Forum: Classifieds - Parts
- Topic: Brass Steering Wheel (SOLD)
- Replies: 1
- Views: 235
Re: Brass Steering Wheel
Sent email
- Mon Oct 02, 2023 3:46 pm
- Forum: Classifieds - Parts
- Topic: Early axle wishbone, spring fs. Sold
- Replies: 1
- Views: 200
Re: Early axle wishbone, spring fs
E- mail sent
- Sun Sep 24, 2023 5:54 am
- Forum: Classifieds - Parts
- Topic: WTB original Driver side (LHD) 1909-1910 spindle
- Replies: 18
- Views: 985
Re: Advice & Education for free contact George, Allan, Joe & Layden hehehehe
Should we start to say Port and Starboard, Fore and Aft?
- Tue Sep 19, 2023 6:38 am
- Forum: General Discussion Forum
- Topic: starter switch in a 1912
- Replies: 7
- Views: 383
Re: starter switch in a 1912
My '12 has a push button switch that is connected to a Ford solinoid. You can put the switch on the panel under the drivers seat, or put it under the coil box. The possibilities are too numerous to list them all
- Sun Sep 17, 2023 5:04 pm
- Forum: General Discussion Forum
- Topic: pattern for top boot
- Replies: 5
- Views: 349
Re: pattern for top boot
Why not get one from Clastique.
Mike made mine for my '14, and did an excellent job.
Mike made mine for my '14, and did an excellent job.
- Fri Sep 01, 2023 3:04 am
- Forum: Classifieds - Parts
- Topic: screwdriver for sale
- Replies: 1
- Views: 311
Re: screwdriver for sale
Sent email
- Sun Aug 20, 2023 5:06 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Brass Top Coils
- Replies: 4
- Views: 523
Re: For Sale: Brass Top Coils
I'll take them.
- Mon Jul 03, 2023 7:34 am
- Forum: General Discussion Forum
- Topic: Does Stutzman's allow visitors?
- Replies: 4
- Views: 668
Re: Does Stutzman's allow visitors?
I stopped in when on the New Philadelphia tour. It was well worth the time to see how the wheels are made and assembled. Be prepared to see some wheels that are totally awesome. He was making a pair that were 6- 8 feet tall.
- Wed Jun 14, 2023 3:32 pm
- Forum: General Discussion Forum
- Topic: I’m in the Old Car Festival
- Replies: 8
- Views: 811
Re: I’m in the Old Car Festival
Just read my email, I'm accepted also. See you all there.
- Wed Jun 14, 2023 3:31 pm
- Forum: General Discussion Forum
- Topic: Ashley Lang's "retirement"
- Replies: 14
- Views: 1532
Re: Ashley Lang's "retirement"
Congratulations on your retirement. I will miss your voice when I call for parts. You have been such a big part of the business. Hope to see you on future tours. Thanks for everything. Enjoy your retirement. Charlie
- Sat Jun 03, 2023 6:40 am
- Forum: General Discussion Forum
- Topic: Broken Crank Club
- Replies: 15
- Views: 1607
Re: Broken Crank Club
It's a tough club to join, but I achieved my membership many years ago. I then renewed that membership. The solution was to use Scat cranks in my rebuilds, as can be attested to Kevin. I now keep a few Scats on hand, for myself or close friends.
- Tue May 30, 2023 6:11 pm
- Forum: Classifieds - Parts
- Topic: Wanted 1913 Touring top iron
- Replies: 16
- Views: 1411
Re: Wanted 1913 Touring top iron
Sent email
- Tue May 30, 2023 6:05 pm
- Forum: Classifieds - Parts
- Topic: Wanted 1913 Touring top iron
- Replies: 16
- Views: 1411
Re: Wanted 1913 Touring top iron
I bought the same top iron from Mel. It was a perfect fit. It's well worth the phone call.
- Mon May 29, 2023 6:15 pm
- Forum: Classifieds - Parts
- Topic: Wanted 1913 Touring top iron
- Replies: 16
- Views: 1411
Re: Wanted 1913 Touring top iron
Try Mel Draper of Mel's leather and horsehair. He made the tip socket for my '12.
- Sat May 20, 2023 8:46 am
- Forum: General Discussion Forum
- Topic: A note of thanks to all of you.
- Replies: 13
- Views: 1460
Re: A note of thanks to all of you.
Congratulations on 50 years. I still talk about my private tour of your facility in Turlock CA in 2012, between Christmas and New years . Still amazes me how much hand work is involved to produce your fenders.
- Sat May 13, 2023 5:24 am
- Forum: General Discussion Forum
- Topic: Luray is ON
- Replies: 35
- Views: 2698
Re: Luray is ON
Top irons were Mel Draper.
Mel's leather and horse hair.
Mel's leather and horse hair.
- Wed May 10, 2023 10:12 pm
- Forum: Classifieds - Parts
- Topic: FS - Coil Tester
- Replies: 5
- Views: 1467
Re: FS - Coil Tester
Going to Luray?
- Thu Feb 23, 2023 10:21 am
- Forum: General Discussion Forum
- Topic: Engine Rebuilders recommendations
- Replies: 7
- Views: 1197
Re: Engine Rebuilders recommendations
I currently have 3 totally rebuilt engines done by Kevin Prus. Great running engines. I would definitely recommend him. Well worth the drive.
- Mon Feb 13, 2023 11:03 am
- Forum: Classifieds - Parts
- Topic: Ford dealers keyboard on eBay sold $1,320
- Replies: 12
- Views: 1736
Re: Ford dealers keyboard on eBay
Reading the sellers description, he states that it is original.
- Sun Feb 05, 2023 10:12 am
- Forum: Classifieds - Parts
- Topic: FS: Walden 6318 Engine Block/Oil Pan Special Wrench
- Replies: 4
- Views: 744
Re: FS: Walden 6318 Engine Block/Oil Pan Special Wrench
Will call tomorrow .Charlie
- Sun Feb 05, 2023 10:11 am
- Forum: Classifieds - Parts
- Topic: FS: Walden 6318 Engine Block/Oil Pan Special Wrench
- Replies: 4
- Views: 744
Re: FS: Walden 6318 Engine Block/Oil Pan Special Wrench
I'll take it.
- Fri Dec 02, 2022 10:41 am
- Forum: Classifieds - Parts
- Topic: WTB 1912 forward passenger door frame striker
- Replies: 6
- Views: 949
Re: WTB 1912 forward passenger door frame striker
Me too. The only part missing.
- Fri Nov 25, 2022 12:24 pm
- Forum: General Discussion Forum
- Topic: Ruxtel and Rocky Mountains
- Replies: 5
- Views: 777
Re: Ruxtel and Rocky Mountains
Try turning the shifter around so the spring is on the other side.
- Thu Nov 24, 2022 1:48 pm
- Forum: Classifieds - Parts
- Topic: SCAMMER ALERT: MTFCA MEMBER "web365ster"
- Replies: 11
- Views: 1981
Re: SCAMMER ALERT: MTFCA MEMBER "web365ster"
I've held back my comments for awhile now. It's not only new posters you have to be concerned about, but one with over 3000 posts. He currently has an item for sale that I personally checked out, and placed it next to my original one, which was cast to his. I pointed out the differences (which were ...
- Sat Nov 12, 2022 9:41 am
- Forum: General Discussion Forum
- Topic: What have you done with your Model T in November?
- Replies: 55
- Views: 5519
Re: What have you done with your Model T in November?
I know exactly how you feel. I look for an excuse to drive to Lang's. I feel like a kid in a candy store each time I go.
- Thu Nov 10, 2022 11:57 am
- Forum: General Discussion Forum
- Topic: Painting embossed badges, keys
- Replies: 3
- Views: 847
Re: Painting embossed badges, keys
I tape off the outer edges of the hubcaps, then paint the entire top. I then let it cure for a week. I then wet sand them till the raised parts are completely showing. Followed by polishing the brass.
- Sat Nov 05, 2022 8:27 pm
- Forum: General Discussion Forum
- Topic: Exhaust manifold
- Replies: 17
- Views: 1554
Re: Exhaust manifold
Found out that it was for a hot air pipe for an accessory carburetor. The hole was plugged, but not correctly.
- Sun Oct 23, 2022 6:05 am
- Forum: General Discussion Forum
- Topic: T adoption - My project progress
- Replies: 195
- Views: 18261
Re: Just adopted a T - It was supposed to be a quiet project
Congratulations on your new car, and welcome to the hobby. I love the fact that you are doing this for, and with your son. Both of my daughters helped in the restoration of "their" cars. Hopefully you will post pictures of your progress.
Good luck.
Good luck.
- Wed Oct 05, 2022 3:41 pm
- Forum: General Discussion Forum
- Topic: Making a 1913 dash board
- Replies: 76
- Views: 5744
Re: Making a 1913 dash board
FWIW, Jon Anderson makes firewalls to the Ford specs. Give him a call.
- Mon Oct 03, 2022 4:28 am
- Forum: General Discussion Forum
- Topic: Model T FIRETRUCK birthday
- Replies: 5
- Views: 1137
Re: Model T FIRETRUCK birthday
Happy Birthday to your truck, from mine.
Please post pictures. My truck is looking for his relatives.
Please post pictures. My truck is looking for his relatives.
- Mon Sep 19, 2022 3:46 pm
- Forum: General Discussion Forum
- Topic: Approximate Year Of This Model T?
- Replies: 11
- Views: 1760
Re: Approximate Year Of This Model T?
Three window openings in the rear of the top indicates it is '17 to '22.
- Sun Aug 28, 2022 12:45 pm
- Forum: Classifieds - Parts
- Topic: E & J FORD Model 666 mirror is good
- Replies: 4
- Views: 1353
Re: E & J FORD Model 666
Sent email
- Wed Aug 17, 2022 5:29 pm
- Forum: Classifieds - Parts
- Topic: WTB-Headlight reflectors
- Replies: 2
- Views: 673
Re: WTB-Headlight reflectors
If you are putting in LED lights, why not put in the polished reflectors that the suppliers sell?
At the same time, put new burner bases.
At the same time, put new burner bases.
- Thu Jul 14, 2022 6:39 pm
- Forum: General Discussion Forum
- Topic: Brakes - Rocky Mountain versus original rear drum brakes
- Replies: 30
- Views: 2896
Re: Brakes - Rocky Mountain versus original rear drum brakes
I know the cost of disc brakes might seem high, but with other drivers the way they are, it is well worth the cost. I just put a set on my 12 touring, I now have more "Pease of mind ".
I also plan on putting disc brakes on the other cars I will be touring with.
I also plan on putting disc brakes on the other cars I will be touring with.
- Thu Jun 16, 2022 9:07 am
- Forum: General Discussion Forum
- Topic: What Body T Have You Most Enjoyed?
- Replies: 26
- Views: 3165
Re: What Body T Have You Most Enjoyed?
As far as comfort goes, my '14s and '12s can't be beat. As far as wows per mile, my 21 firetruck or my 14 chief's car are the best. On days where the weather is iffy, we take the 22 touring. And as Burger said, my 22 Livestock TT hauls the most.
- Fri Jun 10, 2022 8:32 pm
- Forum: General Discussion Forum
- Topic: Gas Tank Pads
- Replies: 4
- Views: 957
Re: Gas Tank Pads
You could use thin zip ties to secure your new ones. It would be quick, and not seen.
- Wed May 18, 2022 9:06 pm
- Forum: Classifieds - Parts
- Topic: wood coil box lid
- Replies: 5
- Views: 1208
Re: wood coil box lid
Yes he is RV's brother.
jpautowood@gmail.com
jpautowood@gmail.com
- Mon May 16, 2022 2:25 pm
- Forum: Classifieds - Parts
- Topic: wood coil box lid
- Replies: 5
- Views: 1208
Re: wood coil box lid
John Anderson, Gerry, N.Y
- Sat May 14, 2022 8:28 pm
- Forum: General Discussion Forum
- Topic: Scam or no Scam
- Replies: 17
- Views: 2683
Re: Scam or no Scam
U.S. airforce awaiting deployment to Poland to assist NATO.? That sounds fishy to me.
- Mon May 09, 2022 11:22 pm
- Forum: General Discussion Forum
- Topic: Passing of Patty Lang
- Replies: 66
- Views: 6198
Re: Passing of Patty Lang
My condolences to the Lang family.
Patty was there when the MTFCI visited during their annual meeting. So glad I had a chance to talk with her. She will be missed by all that knew her.
Patty was there when the MTFCI visited during their annual meeting. So glad I had a chance to talk with her. She will be missed by all that knew her.
- Fri Apr 29, 2022 3:01 pm
- Forum: General Discussion Forum
- Topic: Thoughts on when to get wood wheels rebuilt?
- Replies: 26
- Views: 2494
Re: Thoughts on when to get wood wheels rebuilt?
I would definitely bite the bullet, and have all the wheels rebuilt. The peace of mind, will long out weigh the cost of doing the job right. Maybe two this year, and two next year. Just my honest opinion. Charlie.
- Thu Apr 14, 2022 10:24 am
- Forum: General Discussion Forum
- Topic: Interesting print of a chain drive horseless carriage
- Replies: 4
- Views: 1250
Re: Interesting print of a chain drive horseless carriage
Michael, was that the Leggett that was on the "Tour of the Century " in Steven's Point in 1996?
- Thu Mar 17, 2022 6:55 am
- Forum: General Discussion Forum
- Topic: 1912 Authenticity Questions?
- Replies: 24
- Views: 3100
Re: 1912 Authenticity Questions?
I just had a new '12 dash made by Jon Anderson.
Excellent job. He uses the original drawings so you get an exact repop. I plan on finishing it with the Laurel Forge cherry stain, as I did for my '14s.
Excellent job. He uses the original drawings so you get an exact repop. I plan on finishing it with the Laurel Forge cherry stain, as I did for my '14s.
- Tue Mar 08, 2022 11:24 am
- Forum: General Discussion Forum
- Topic: Best blue for 1912, final question at the bottom!
- Replies: 23
- Views: 3210
Re: Best blue for 1912
I saw this used on a Fiat. It was darker than the Mercedes blue.
- Sun Feb 20, 2022 8:37 am
- Forum: General Discussion Forum
- Topic: New Member wanna B
- Replies: 23
- Views: 2948
Re: New Member wanna B
Good luck with the '14. '14's were the last of the antique brass T's. I searched 40 years before I bought my first '14. A few years latter I got my 2nd '14.
- Mon Jan 24, 2022 11:12 am
- Forum: General Discussion Forum
- Topic: Winter Clinic Photos
- Replies: 9
- Views: 1772
Re: Winter Clinic Photos
Thanks Steve for taking the time posting the photos. Just wished it was closer.
Nice pictures of the fantastic model Chris.
Nice pictures of the fantastic model Chris.
- Mon Jan 24, 2022 8:31 am
- Forum: General Discussion Forum
- Topic: How many leaf springs?
- Replies: 15
- Views: 2119
Re: How many leaf springs?
26/27 sedans and heavier vehicles used 9 leafs.
I would go with the 8, just how much weight are you planning on hauling?
I would go with the 8, just how much weight are you planning on hauling?
- Wed Jan 19, 2022 4:19 am
- Forum: Classifieds - Parts
- Topic: Brass Holley G carburetor
- Replies: 10
- Views: 2031
Re: Brass Holley G carburetor
It would work fine on your 14.
I run a G on mine.
I run a G on mine.
- Wed Jan 19, 2022 4:09 am
- Forum: Classifieds - Parts
- Topic: Brass Holley G carburetor
- Replies: 10
- Views: 2031
Re: Brass Holley G carburetor
14 had a brass bowl, and the top would say "Pat Pending"
- Mon Dec 27, 2021 11:53 am
- Forum: General Discussion Forum
- Topic: Me and My Wife Have Joined the T and A Club
- Replies: 10
- Views: 1705
Re: Me and My Wife Have Joined the T and A Club
I learned to drive on a 1928 model A touring. At the age of 6, my father put me in it, showed me how to shift, and told me not to hit anything. By the way, it was in the middle of a 20 acre hayfield.
- Sun Dec 26, 2021 3:31 pm
- Forum: General Discussion Forum
- Topic: Wanting to resume T activity
- Replies: 26
- Views: 3183
Re: Wanting to resume T activity
After triple bypass, I was back to work in 10 weeks. I limited myself to what I could do within the Dr's recommend weight limitations. I was able to crank my T 6 Mos. post surgery. Good luck with your recovery. Resist doing things to fast. Your body will let you know how you are really doing.
- Thu Dec 16, 2021 3:04 am
- Forum: Classifieds - Parts
- Topic: Instant collection of hubcaps
- Replies: 5
- Views: 2061
Re: Instant collection of hubcaps
I don't see any with an axle end protruding through.
- Sat Dec 11, 2021 10:38 am
- Forum: General Discussion Forum
- Topic: Services tomorrow at 11:00 a.m.
- Replies: 8
- Views: 1644
Re: Services tomorrow at 11:00 a.m.
1912 without carbide generator, and different tail light.
Nice picture.
Nice picture.
- Fri Nov 26, 2021 6:15 am
- Forum: General Discussion Forum
- Topic: Model T Time Machine
- Replies: 10
- Views: 2131
Re: Model T Time Machine
I agree. Driving along slowly, past working farms, brings me back to my childhood working on our dairy farm. I find myself intentionally slowing down to enjoy the many scents emitting from within.
This habit sometimes upsets my passengers, but I am the driver...
This habit sometimes upsets my passengers, but I am the driver...
- Sat Oct 30, 2021 3:32 pm
- Forum: General Discussion Forum
- Topic: The Speedester Beginning
- Replies: 3
- Views: 992
Re: The Speedester Beginning
Nice find. No $500 is not to much.
I started my speedster with just what you have there. Had it running in one day.
Mine sat for 74 years in a dry basement and then a barn.
Good luck with your build.
I started my speedster with just what you have there. Had it running in one day.
Mine sat for 74 years in a dry basement and then a barn.
Good luck with your build.
- Thu Oct 28, 2021 12:31 pm
- Forum: General Discussion Forum
- Topic: OLD PHOTO - Ladies Day Out
- Replies: 7
- Views: 1409
Re: OLD PHOTO - Ladies Day Out
John, it appears that the body is a '14 style body, and the windshield is a '13 type, along with the earlier support rods.
- Mon Oct 18, 2021 11:26 pm
- Forum: General Discussion Forum
- Topic: Coils By Ron Patterson..
- Replies: 14
- Views: 3057
Re: Coils By Ron Patterson..
Steve, where did you find a 5 cylinder Model T ?
- Mon Oct 11, 2021 3:02 am
- Forum: General Discussion Forum
- Topic: Hershey Photos
- Replies: 24
- Views: 3795
Re: Hershey Photos
Great picture Steve. I really enjoyed our chat during the car show on Saturday. Glad you made it home safely.
- Thu Sep 23, 2021 2:34 pm
- Forum: General Discussion Forum
- Topic: T Eats Timers
- Replies: 25
- Views: 2633
Re: T Eats Timers
That is why I bought an I-Timer.
There are no physical connections, and the car runs great. It was well worth the investment.
You will also need a set of rebuilt coils to go along with the timer. Afterwards you will notice an improvement.
There are no physical connections, and the car runs great. It was well worth the investment.
You will also need a set of rebuilt coils to go along with the timer. Afterwards you will notice an improvement.
- Mon Sep 20, 2021 2:21 pm
- Forum: General Discussion Forum
- Topic: OLD PHOTO - Brass Era, She's A Mudder!
- Replies: 5
- Views: 1426
Re: OLD PHOTO - Brass Era, She's A Mudder!
To answer the question on the windshield.
There was an after market kit that allowed you to pull the bottom of the windshield back, allowing the air to cool your feet.
There is a '14 Canadian T that comes to the MTFCI tours with this feature.
There was an after market kit that allowed you to pull the bottom of the windshield back, allowing the air to cool your feet.
There is a '14 Canadian T that comes to the MTFCI tours with this feature.
- Tue Sep 14, 2021 9:59 am
- Forum: General Discussion Forum
- Topic: Help re 26-27 ignition key
- Replies: 12
- Views: 2166
Re: Help re 26-27 ignition key
I have seen repop master key sets for sale.
Langs list them as 5013-MSTR. for $37.95
They cover keys 51 to 74
Langs list them as 5013-MSTR. for $37.95
They cover keys 51 to 74
- Sun Sep 05, 2021 9:48 am
- Forum: General Discussion Forum
- Topic: Time to get windshield glass or Lexan, what size and curves?
- Replies: 18
- Views: 2988
Re: Time to get windshield glass or Lexan, what size and curves?
The two holes may have been for the manufacturer's tag. The single hole was probably for a windshield wiper.
- Wed Aug 18, 2021 7:18 am
- Forum: Classifieds - Parts
- Topic: WTB buggy rail
- Replies: 1
- Views: 812
Re: WTB buggy rail
How about an Amish buggy maker.
There is a catalog that shows what is offered.
There is a catalog that shows what is offered.
- Mon Aug 16, 2021 11:00 am
- Forum: General Discussion Forum
- Topic: News regarding well known Forum Member
- Replies: 43
- Views: 6073
Re: News regarding well known Forum Member
I don't believe that I know Eric or his wife, but I wish them well. I am familiar with many people in this hobby, and it's nice to know that others pass along information about their well-being. Maybe there should be a " good and welfare " section added. That way we may be informed to happenings, th...
- Fri Aug 13, 2021 12:34 pm
- Forum: Classifieds - Parts
- Topic: Large drum ruckstel
- Replies: 13
- Views: 2687
Re: Large drum ruckstel
No rockies or sure stop needed. Just use air brakes.
- Wed Aug 11, 2021 3:13 am
- Forum: Classifieds - Parts
- Topic: FS PARTS NOS
- Replies: 9
- Views: 1993
Re: FS PARTS NOS
I'll take the two spindle arms. Charlie
The ones with the speedometer hole.
The ones with the speedometer hole.
- Tue Aug 10, 2021 10:09 am
- Forum: Classifieds - Parts
- Topic: Wanted 1913 windscreen support.
- Replies: 17
- Views: 2283
Re: Wanted 1913 windscreen support.
A quick fix would be to get some electrical conduit, squeeze the ends, drill, paint, and install till you find the correct ones.
- Tue Aug 10, 2021 10:05 am
- Forum: Classifieds - Parts
- Topic: Wanted 1913 windscreen support.
- Replies: 17
- Views: 2283
Re: Wanted 1913 windscreen support.
Yes, those supports, which are straight, are for the windshields that fold forward.
When Ford changed to the windshields that folded in, he changed the design so that the windshield could be folded without obstructions.
When Ford changed to the windshields that folded in, he changed the design so that the windshield could be folded without obstructions.
- Mon Aug 09, 2021 11:32 pm
- Forum: Classifieds - Parts
- Topic: Wanted 1913 windscreen support.
- Replies: 17
- Views: 2283
Re: Wanted 1913 windscreen support.
The windshield folds forward, so you need two straight supports.
- Fri Aug 06, 2021 6:47 am
- Forum: Classifieds - Parts
- Topic: For Sale original pair of late 1911 -1912 Fore Doors
- Replies: 5
- Views: 1527
Re: For Sale original pair of late 1911 -1912 Fore Doors
Sent e-mail, Charlie
- Fri Jul 30, 2021 2:29 am
- Forum: Classifieds - Parts
- Topic: New 30x3 tubes FS
- Replies: 1
- Views: 690
Re: New 30x3 tubes FS
I'm interested, Charlie
- Thu Jul 29, 2021 10:24 am
- Forum: General Discussion Forum
- Topic: 2021 MTFCI Stynoski Award
- Replies: 23
- Views: 3712
Re: 2021 MTFCI Stynoski Award
Congratulations Russ on winning the Stynowski award. Both cars were fine examples of the quality needed for the award. I was glad I didn't have to judge this class. More importantly, Congratulations on getting the Life Time Achievement award. You have contributed immensively to the hobby, and we are...
- Tue Jul 27, 2021 1:16 pm
- Forum: General Discussion Forum
- Topic: Exact Manufacturing date of Model T
- Replies: 6
- Views: 1492
Re: Exact Manufacturing date of Model T
October 28, 1913
- Tue Jul 06, 2021 6:44 am
- Forum: Classifieds - Parts
- Topic: WTB: 13/14 Upholstery
- Replies: 18
- Views: 3411
Re: WTB: 13/14 Upholstery
I have the upholstery that I removed from 2 of my 14's. I can bring it to Ohio next week. Take a look.
- Wed Jun 30, 2021 11:56 pm
- Forum: General Discussion Forum
- Topic: Eyre 11 Torpedo done today
- Replies: 38
- Views: 6975
Re: Eyre 11 Torpedo done today
Congratulations on a very nice restoration.
Good luck on your 1st junior. Looks like there will be no problem.
Good luck on your 1st junior. Looks like there will be no problem.
- Tue Jun 29, 2021 5:51 pm
- Forum: Classifieds - Parts
- Topic: WTB 26 27 Roadster Light Bar
- Replies: 6
- Views: 1416
Re: WTB 26 27 Roadster Light Bar
I have a bar with both lights attached. I will try to find it tomorrow. If you are not in a hurry, I can give it to a friend that lives near you, when we go to the Ohio tour in a few weeks. Charlie
- Sun Jun 27, 2021 11:15 am
- Forum: General Discussion Forum
- Topic: What is this part?
- Replies: 7
- Views: 1706
Re: What is this part?
Great find. I believe that part is not reproduced.
I just found one cleaning out a friend's garage.
I just found one cleaning out a friend's garage.
- Wed Jun 23, 2021 10:15 am
- Forum: General Discussion Forum
- Topic: 13 engine Id. Problems
- Replies: 8
- Views: 1670
Re: 13 engine Id. Problems
Someone here listed a 12 block for sale. When I examined it, the pad had been shortened, it didn't have the threaded freeze out plugs, and other things that made it a non 12 block.
At least YOU are being honest...
At least YOU are being honest...
- Wed Jun 23, 2021 10:11 am
- Forum: General Discussion Forum
- Topic: 13 engine Id. Problems
- Replies: 8
- Views: 1670
Re: 13 engine Id. Problems
Did someone remove half of the 3?
- Tue Jun 15, 2021 11:07 am
- Forum: General Discussion Forum
- Topic: Help with a mystery man ??
- Replies: 13
- Views: 2764
Re: Help with a mystery man ??
Tim, to me the ears don't match.
Also the area around the eye(s) are different.
Also the area around the eye(s) are different.
- Wed Jun 09, 2021 4:26 pm
- Forum: Classifieds - Parts
- Topic: Fan. With some sort of advance. Sold
- Replies: 5
- Views: 1382
Re: Fan. With some sort of advance
Check with Jerry Kramer at the museum.
They might like it
I have a different type that may go there also.
They might like it
I have a different type that may go there also.
- Sat May 22, 2021 2:39 pm
- Forum: Classifieds - Parts
- Topic: What dontcha need? LQQK !
- Replies: 10
- Views: 2205
Re: What dontcha need? LQQK !
Baby Lincoln radiator cap? Price please.
- Mon May 17, 2021 12:28 pm
- Forum: General Discussion Forum
- Topic: HELP!!! LOST!! AT LURAY!!!
- Replies: 9
- Views: 3203
Re: HELP!!! LOST!! AT LURAY!!!
The good news is that people in this hobby are probably the most honest people I have dealt with.
Give it some time, as people are still unpacking their vehicles. You will be getting a call or email that your treasures were found.
Give it some time, as people are still unpacking their vehicles. You will be getting a call or email that your treasures were found.
- Sat May 15, 2021 7:08 am
- Forum: General Discussion Forum
- Topic: A Very Special Thank You!
- Replies: 10
- Views: 3129
Re: A Very Special Thank You!
Yes, it was a great swap meet. I got to see a lot of friends, and meet a lot of people who are active on the forum, or active in the MTFCA and MTFCI.
Thanks to Dennis and all the others who make this event happen. CHARLIE
Thanks to Dennis and all the others who make this event happen. CHARLIE