MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 257 matches

Topics

Replies

Views

Last post

Hydraulic stabilizer on front axle

Last post by Chris Barker « Fri Mar 31, 2023 5:23 am
Posted in General Discussion Forum
Replies: 10
by Model T Ron » Wed Mar 29, 2023 10:38 pm » in General Discussion Forum

First post

Just wanted to know everyone's thoughts on the Hydraulic stabilizer for front axle. I have one on my 15 Touring (came with it) and the car never seems to get caught in the ruts and I never had an issue with the front wheels tracking. I drove my 24 Coupe with a very tight front end for the first time last weekend and she tracked with the road. The...

Last post

The tie rod is carefully designed to carry just end loads - tension and compression. And it's a tube.
I would not want that device adding bending loads, with an added risk of fretting or compression at its attachment.

Put it away with any water pumps you may own.

10 Replies

347 Views

Last post by Chris Barker
Fri Mar 31, 2023 5:23 am
Excellent Surplus Parts For Sale

Last post by RichJ « Fri Mar 31, 2023 3:52 am
Posted in Classifieds - Parts
Replies: 20
by Rick_Rice » Sun Feb 19, 2023 8:41 am » in Classifieds - Parts

First post

I am starting the process to prepare for retirement and have decided to concentrate only on keeping and improving my 1914 open express truck. I spent the day yesterday going through all my Model T treasures and have the following excellent surplus parts available for sale.
I can not post photos and please do not private message me through this...

Last post

Got my items from Mr Rice in good order and would recommend him as a seller
All I'm gonna say is thanks Rick and I have had one unhappy buyer myself

nv Bob
Probably refuting to me,
ruxstel parts was perfect, neglected to say ,they for TT !
Contact me off line for details.

20 Replies

2327 Views

Last post by RichJ
Fri Mar 31, 2023 3:52 am
Need Help with the Starter Switch for My 1927 Coupe

Last post by TRDxB2 « Fri Mar 31, 2023 3:12 am
Posted in General Discussion Forum
Replies: 3
by BLB27 » Thu Mar 30, 2023 11:01 pm » in General Discussion Forum

First post

I am getting ready to install a starter switch in my coupe. I have purchased two of the repos. They are the 5014 and 5014RE from Lang's. After looking at both, I would rather use my original switch. The switches are shown in the attached photos.

I want to consider using a starter solenoid. I appreciate some discussion about it, pros and cons,...

Last post

There are numerous discussions about the repro switches. The basic issue with them is how the plunder tube is attached to its base.
Here the problem. The top of the switch just needs to clear the floor board for the switch to make contact. When its to high and/or the hole its in is to big foot pressure will bend it forward. That will cause only...

3 Replies

46 Views

Last post by TRDxB2
Fri Mar 31, 2023 3:12 am
Trained Ear, engine idle

Last post by Kerry « Fri Mar 31, 2023 2:49 am
Posted in General Discussion Forum
Replies: 5
by Keith Daniels » Thu Mar 30, 2023 8:29 pm » in General Discussion Forum

First post

Picker her up Sunday, got her running Tuesday, this is the third run. I think I'm getting closer on all the adjustments, plus the engine seems to be smoothing out, she sat for a few years.

The old oil looked about like when I change my diesel, only a little thick. My hearing isn't the best plus I don't really know what a T is supposed to sound...

Last post

Revving too fast for an idle.

5 Replies

155 Views

Last post by Kerry
Fri Mar 31, 2023 2:49 am
Buffalo wire wheels

Last post by tselliott « Fri Mar 31, 2023 2:36 am
Posted in Classifieds - Parts
Replies: 2
by tselliott » Fri Mar 31, 2023 2:31 am » in Classifieds - Parts

First post

This is a nice solid set of wire wheels with Coker white wall tires. Tires have never been run. No bent, loose, or missing spikes. There is some pitting on the rims and some flaking paint. Overall a nice set of buffalo wire wheels. Could possibly be delivered to the Portland swap meet this weekend.
$3200
Scott Elliott
971-5O6-94O2

Last post

More pictures

2 Replies

24 Views

Last post by tselliott
Fri Mar 31, 2023 2:36 am
rocky mountain brakes

Last post by Nv Bob « Fri Mar 31, 2023 2:24 am
Posted in General Discussion Forum
Replies: 19
by Barteldes » Tue Mar 28, 2023 5:17 pm » in General Discussion Forum

First post

I have a 24 coupe and think i should get the rocky mountain brakes. I dont care if i die but it would be a shame to hurt that Beautiful car. Where do i start? Langs? Are they hard to install? And is it better to get the petal rather than welding on a tab yourself?

Last post

The new rockies are redesigned from the orginal design in that there's an increase in forward braking
And loose some backward braking
The orginals are happy mix in both direction
That being said only time I cursed new rockies on mountai road and had stop and I had stand on the pedal and still rolled back into the hillside

19 Replies

547 Views

Last post by Nv Bob
Fri Mar 31, 2023 2:24 am
Ruckstell Axle

Last post by Craig Leach « Fri Mar 31, 2023 1:36 am
Posted in Classifieds - Parts
Replies: 4
by Barteldes » Wed Mar 29, 2023 5:55 pm » in Classifieds - Parts

First post

Does anyone know how i get my hands on a Ruckstell Axle? I suppose you are all laughing right about now.

Last post

Hi Bill,
I know this will never happen again, 5 years ago I picked up a Ruckstell, engine & frame at a metal recycling place on a tip from a friend for
$350 the engine was seazed but the Trans. yeilded many good parts. The Ruckstell was in impecable condition and was up & running for a
total of $500. And still had a good Trans. that went in...

4 Replies

449 Views

Last post by Craig Leach
Fri Mar 31, 2023 1:36 am
FJ - Some Humor To Brighten Your Day

Last post by FreighTer Jim « Fri Mar 31, 2023 12:53 am
Posted in OT - Off topic
Replies: 1636
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

13

14

15

16

17
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

IMG_5093.jpeg

FJ
1636 Replies

373052 Views

Last post by FreighTer Jim
Fri Mar 31, 2023 12:53 am
WTB: peddlers box for the back of a t roadster

Last post by frontyboy « Thu Mar 30, 2023 11:35 pm
Posted in Classifieds - Parts
Replies: 11
by frontyboy » Tue Mar 21, 2023 11:16 pm » in Classifieds - Parts

First post

looking for a peddlers box for a roadster. Condition not important as long as it has the hardware.

frontyboy 2ho6 9191949 text or call.

Last post

Still looking

frontyboy

11 Replies

834 Views

Last post by frontyboy
Thu Mar 30, 2023 11:35 pm
Amp meter

Last post by DHort « Thu Mar 30, 2023 11:18 pm
Posted in General Discussion Forum
Replies: 12
by Barteldes » Fri Mar 24, 2023 10:30 am » in General Discussion Forum

First post

Langs doesn't have an amp meter. Mine is sticking. Is there a way to clean it? or somewhere else to get one?

Last post

Did you try Snyders, Chaffins, Bob's, and Gaslight Auto?

12 Replies

475 Views

Last post by DHort
Thu Mar 30, 2023 11:18 pm
What have you done to your model T in March

Last post by frontyboy « Thu Mar 30, 2023 11:14 pm
Posted in General Discussion Forum
Replies: 39
by modernbeat » Wed Mar 01, 2023 11:59 pm » in General Discussion Forum

First post

Installed a working switch panel with illumination into the camping car.

Last post

Just under the wire: Today laid the fresh ground EE crank, added new rods with Aluminum hc pistons and rings. Installed the new mag coil ring, adjusted the gap and mounted the flywheel. All on the second to the last March.

Next will be assembly of the transmission, bands, pan and hogs head plus new Aluminum high compression head. Going to install...

39 Replies

2369 Views

Last post by frontyboy
Thu Mar 30, 2023 11:14 pm
Portland Swap Meet

Last post by KWTownsend « Thu Mar 30, 2023 10:37 pm
Posted in General Discussion Forum

by KWTownsend » Thu Mar 30, 2023 10:37 pm » in General Discussion Forum

The Portland Swap Meet begins tomorrow, March 31. The Always in April swap meet continues through Sunday April 2. Rain (most likely) or shine, come on out and see me at the HCCA booth in the northeast corner of the D building. Look for the big yellow banner!

PSM 2017-1.jpg

: ^ )

Keith

0 Replies

58 Views

Last post by KWTownsend
Thu Mar 30, 2023 10:37 pm
Floorboard and trim questions

Last post by Scott_Conger « Thu Mar 30, 2023 9:50 pm
Posted in General Discussion Forum
Replies: 6
by Reno Speedster » Thu Mar 30, 2023 1:41 am » in General Discussion Forum

First post

The floorboard in my 22 (not original) was banged up and broken so I made a new one out of some wood I had in the shop. I need to add some cleats on the bottom. Can anyone tell me how wide they are and how far from the ends of the board they were mounted? Also, it appears the cleats were held on with screws or nails, but I can’t tell from the...

Last post

Morgan

when I rewooded my '23, I shiplapped the two boards and boy I'm glad I did. Over 8 years the boards shrunk and now rather than having an 1/8 gap, it is still physically closed via overlap, and no water/mud can come through. I kept most everything true to stock with the exception of shiplap on front floorboards and the turtle deck floor.

6 Replies

272 Views

Last post by Scott_Conger
Thu Mar 30, 2023 9:50 pm
Kingston 4-Ball Carburetor

Last post by MNToys « Thu Mar 30, 2023 9:42 pm
Posted in Classifieds - Parts

by MNToys » Thu Mar 30, 2023 9:42 pm » in Classifieds - Parts

Nice original 4-Ball. Looks complete. Nothing is frozen-ready for rebuild. I have not had the bowl off. $150 including shipping to the lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

C6D644F0-BF77-4E65-86C3-A13C004B4DA0.jpeg

E1B686F2-A66B-4CDB-BF67-40173E70EB55.jpeg

9DF646EB-E6CB-4AC3-BCBC-2352BB5180AA.jpeg...

0 Replies

51 Views

Last post by MNToys
Thu Mar 30, 2023 9:42 pm
Complete Ruckstell with extra parts FS

Last post by reifjr « Thu Mar 30, 2023 9:21 pm
Posted in Classifieds - Parts

by reifjr » Thu Mar 30, 2023 9:21 pm » in Classifieds - Parts

Selling a complete Ruckstell differential, with the shifter assembly. I also have an assortment of parts that can be used to build up a second Ruckstell.

The complete assembly, in the attached photo, was under my 26 Roadster and is in excellent condition. Thrust washers, gaskets and new bearings should be all that's needed.

Most if the parts...

0 Replies

125 Views

Last post by reifjr
Thu Mar 30, 2023 9:21 pm
FS PINION GEARS

Last post by Mark Chaffin « Thu Mar 30, 2023 9:17 pm
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Thu Mar 30, 2023 5:21 pm » in Classifieds - Parts

First post

An assortment of very nice rear axle pinion gears. Prices and description as indicated below. Domestic shipping will be an additional charge of $9.10 USPO Priority Flat Rate. PM me or call Mark Chaffin (951) 805-0928

Pinion 1.jpg
10 Tooth Pinion. $100 plus shipping.

Pinion 2.jpg
11 Tooth Pinion. $75.00 plus shipping

Pinion 3.jpg
11 Tooth...

Last post

Sold to Terry.

2 Replies

184 Views

Last post by Mark Chaffin
Thu Mar 30, 2023 9:17 pm
13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY

Last post by dobro1956 « Thu Mar 30, 2023 8:34 pm
Posted in Classifieds - Parts
Replies: 63
by Dan Hatch » Thu Feb 16, 2023 1:57 pm » in Classifieds - Parts

First post

These are for the Pinion Bearing Bolts. Special size not available at hardware store.
Please use email address in picture, not PM

Taps are done! Sending out totals

I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an...

Last post

Dan, The tap arrived today. Very nice as usual. Thanks for having them made.
.....

63 Replies

3483 Views

Last post by dobro1956
Thu Mar 30, 2023 8:34 pm
Tony Bowker

Last post by KirkieP « Thu Mar 30, 2023 8:19 pm
Posted in General Discussion Forum
Replies: 23
by Model_T_Family » Wed Mar 29, 2023 8:29 pm » in General Discussion Forum

First post

Hi friends,

It saddens me to let you know Tony Bowker lost his fight today with a very aggressive Cancer. He was a dear friend, my role model in this hobby, a great mentor. I loved him like he was family. I had planned to see him this weekend but sadly it will never come. He loved these cars like no other, he loved his many friends and members he...

Last post

Tony was a GREAT Guy.
He will be missed.

23 Replies

843 Views

Last post by KirkieP
Thu Mar 30, 2023 8:19 pm
MTFCA Annual Meeting

Last post by Scott_Conger « Thu Mar 30, 2023 8:09 pm
Posted in General Discussion Forum
Replies: 27
by AndyClary » Tue Mar 28, 2023 9:30 am » in General Discussion Forum

First post

Wasn’t there a meeting last weekend? Any reports or photos?

Andy

Last post

And right now as of 5:47 Mountain Time, there are exactly 3 Club members on the Forum, along with 285 guests

Maintaining total radio silence on the Forum is a perfect way to protect Club goings-on from 285 potential interlopers who just might be inspired to join the Club. GADS!!

I doubt very much that a few pictures here would spoil the...

27 Replies

764 Views

Last post by Scott_Conger
Thu Mar 30, 2023 8:09 pm
Switch panel FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:05 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 11:36 am » in Classifieds - Parts

First post

Early switch panel. Has lock tumbler in, key 55. But does not turn. No switch parts. Has an amp meter, don’t know condition. Needle does move. $20.00 + shipping. Email me at address in pictures. Thanks Dan.
00147A12-0BB5-4D8B-B28A-BD6007ED9848.jpeg
C69B8233-77B5-433A-A18F-1943ED243095.jpeg
2F6D2D44-50B1-49FD-97A9-D3E3FAD901C1.jpeg

Last post

Back to the top

3 Replies

378 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:05 pm
26/27 Amp Meter FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:04 pm
Posted in Classifieds - Parts
Replies: 4
by Dan Hatch » Sun Mar 26, 2023 2:31 pm » in Classifieds - Parts

First post

Here is a 26/27 amp meter. Looks like an original, but I am not sure. Needle moves, don’t know if it works. $25.00. Email me at address in pictures. Thanks Dan.
339BEADE-64FF-41AA-BA80-F1775EA1443A.jpeg
F13962B9-E4A6-4468-B6BD-DF5C07DA0A12.jpeg
80B89D7E-7F36-4C5D-9CCC-8D12F7CC95E3.jpeg

Last post

Back to the top

4 Replies

303 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:04 pm
NOS T 3420 FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:04 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 11:01 am » in Classifieds - Parts

First post

Here are some 3420 low speed adjusting screw lock nuts. They are NOS. $2.50 each + shipping. Email me at address in pictures. Thanks Dan
678F7B03-52B7-47D5-A937-DC3361E6AC98.jpeg
2C7F4E1C-8724-4945-A34E-6179FC149B8F.jpeg

Last post

Back to the top

3 Replies

591 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:04 pm
Tobin Arp Mike FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:03 pm
Posted in Classifieds - Parts
Replies: 5
by Dan Hatch » Sun Mar 26, 2023 11:17 am » in Classifieds - Parts

First post

Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg

Last post

Back to the top

5 Replies

523 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:03 pm
ORIGINAL NON FORD KEYBOARD

Last post by blauvelt « Thu Mar 30, 2023 7:55 pm
Posted in Classifieds - Parts
Replies: 7
by Chaffins » Sat Mar 25, 2023 2:18 pm » in Classifieds - Parts

First post

ORIGINAL NON FORD KEY BOARD $25.00 PLUS SHIPPING SAYS KEYS TO FIT FORDS

SOLD

Last post

No!

ANOTHER ORIGINAL NON FORD KEYBARD $250.00

PICTURE PLEASE!!

Never mind... No longer interested.

7 Replies

749 Views

Last post by blauvelt
Thu Mar 30, 2023 7:55 pm
6Th Annual Model T- Model A- Prewar Swap. Minnesota.

Last post by BobP « Thu Mar 30, 2023 7:51 pm
Posted in General Discussion Forum
Replies: 12
by BobP » Sun Mar 05, 2023 3:08 pm » in General Discussion Forum

First post

We are having our 6th annual Model T- Model A - prewar swap meet and car show at our farm Saturday April 22, 2023 stating at 7AM. Free overnight primitive camping. Free setup, free admission. Restroom and lunch wagon on site. Location is 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell or look. Questions, call 507 458...

Last post

btttttttttttttttttt

12 Replies

777 Views

Last post by BobP
Thu Mar 30, 2023 7:51 pm
W T B--1913 roadster body or project car

Last post by Burlingtontguy « Thu Mar 30, 2023 7:32 pm
Posted in Classifieds - Parts
Replies: 17
by Burlingtontguy » Sun Jan 08, 2023 8:51 pm » in Classifieds - Parts

First post

I am looking for a 1913 0r 1914 body to build a Runabout Give me a call or send e-mail with pictures and price with contact number
Dennis 401-932-3191

Last post

to the top

17 Replies

1874 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:32 pm
1923 &1924 Chassis FOR SALE

Last post by Burlingtontguy « Thu Mar 30, 2023 7:31 pm
Posted in Classifieds - Parts
Replies: 23
by Burlingtontguy » Thu Nov 18, 2021 7:07 pm » in Classifieds - Parts

First post

DSCF0979 .JPG I have 2 Chassis FOR SALE. They have front fenders,{passenger or Commercial}, Radiators and shells, steel fire walls,steering columns, e-brake handle & rods,wheels with tires, fuel tanks, rear roadster fenders or coupe fenders, running boards . Engines rebuildable or running engine option. $4000 each OBO. engine prices to be...

Last post

to the top

23 Replies

5388 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:31 pm
FOR SALE 50 year old collection of "T" parts one by one

Last post by Burlingtontguy « Thu Mar 30, 2023 7:31 pm
Posted in Classifieds - Parts
Replies: 8
by Burlingtontguy » Sun Oct 16, 2022 11:59 pm » in Classifieds - Parts

First post

I have a 50 year old collection of T parts that needs to be down sized, E-mail or call with needs,, Dennis 401-932-3191

Last post

to the top

8 Replies

2354 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:31 pm
Model T Manley Wrecker Boom Project For Sale

Last post by Burlingtontguy « Thu Mar 30, 2023 7:30 pm
Posted in Classifieds - Parts
Replies: 26
by Burlingtontguy » Mon Mar 21, 2022 8:58 pm » in Classifieds - Parts

First post

i have a 1923 model t chassis with a Wooden Cab and a Hand Crank Manley Wrecker Boom for sale, I will sell all of the wrecker as one piece or part of the components, Just the Cab ,Or Just the Wrecker boom, or just the chassis, your call, I need to Down size my estate at this time, give me a call to discuss the T . thanks, Dennis 401-932-3191...

Last post

to the top

26 Replies

4858 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:30 pm
Our club mascot the comic hero

Last post by tom_strickling « Thu Mar 30, 2023 6:43 pm
Posted in General Discussion Forum
Replies: 6
by TWrenn » Thu Mar 30, 2023 11:47 am » in General Discussion Forum

First post

A few years ago our club adopted Jim Riedy's Golden Retriever as our mascot. He loves riding in Jim's '26 Roadster. He even helps Jim at stop intersections by literally looking both ways for traffic. Jim's daughter is quite a talented artist and made this comic poster and framed it. I think Rich Eagle will appreciate this! That's Jim holding the...

Last post

That is TOOOOOO cool!

6 Replies

288 Views

Last post by tom_strickling
Thu Mar 30, 2023 6:43 pm
For Sale: Set of 4 Wire Wheel Hubs

Last post by Ed Fuller « Thu Mar 30, 2023 6:32 pm
Posted in Classifieds - Parts
Replies: 1
by Ed Fuller » Thu Mar 30, 2023 6:30 pm » in Classifieds - Parts

First post

Here is a set of 4 wire wheel hubs. One front hub has had a stud replaced and the other front hub still has some old bearings installed . The rear hubs have nice tapers and keyways. Looks like they were installed on axle shafts. The drums have some heavy pitting.

$450 plus shipping in the U.S. for the set....

Last post

4942E0C3-F2CA-4162-BDF4-4D20AFC552EA.jpeg

3C323C66-A674-4FA9-A730-2E581D6204EE.jpeg

20F49259-3C52-4048-9955-17A48C0E26F2.jpeg

D7F2B183-17EF-4DEE-B9CE-6704234DF912.jpeg

1 Replies

103 Views

Last post by Ed Fuller
Thu Mar 30, 2023 6:32 pm
Ignition switch question

Last post by Ed Fuller « Thu Mar 30, 2023 6:22 pm
Posted in General Discussion Forum
Replies: 8
by SteveD » Thu Mar 30, 2023 12:09 pm » in General Discussion Forum

First post

My car came with an after market ignition switch. In a box of parts I found the original switch still mounted in the backing plate. I suspect it's easily restorable. My question is, how do I determine what key it takes?

Last post

If it is an original switch and has the later type key which is two sided with a slot on one side, you should have a number stamped on the front of the barrel of the switch. The key is the same number. Let me caution you, however, the reproduction keys are not always ground exactly right and you might find one key with that number which works fine...

8 Replies

230 Views

Last post by Ed Fuller
Thu Mar 30, 2023 6:22 pm
Cabin fevered dreams

Last post by TWrenn « Thu Mar 30, 2023 6:15 pm
Posted in General Discussion Forum
Replies: 3
by Steve Jelf » Thu Mar 30, 2023 11:21 am » in General Discussion Forum

First post

For no particular reason except that I really want to get back to traveling, here are three shots on the road last year.

IMG_9728 copy.JPG
On Christie Street, Greenfield Village.

IMG_9719 copy.JPG
Early morning by a soybean field, Crawfordsville, Indiana.

IMG_9694.JPG
Part of the adventure, near Bowling Green, Missouri. My...

Last post

I broke my cabin fever 4 times in February. It was a nicer month to bring out the Fordor than March was! I'm glad March is over.

3 Replies

274 Views

Last post by TWrenn
Thu Mar 30, 2023 6:15 pm
Tulare 2023 Just a Few Weeks Away!!!

Last post by 67pontiac « Thu Mar 30, 2023 6:13 pm
Posted in General Discussion Forum
Replies: 21
by 67pontiac » Mon Mar 20, 2023 6:30 pm » in General Discussion Forum

First post

Greetings All!! Get ready for a wonderful and rewarding Tulare Swap Meet at the Tulare County Fair Grounds on April 14-15 2023. Move-in day is April 13 from 9:00am to 6:00pm. This year we have a new and, (hopefully), permanent venue. After two years at the Agri-Center, we moved to the Fair Grounds. This will be a Pre-War ONLY event this year, much...

Last post

PLEASE READ!!!!!!! I'm going to move this to the top and give some critical information. I've received several calls about the possibility of cancelling the Swap Meet. THE SWAP MEET AT THE FAIR GROUNDS IS, NOT, I repeat, NOT, cancelled. I don't know where these rumors are coming from, But I'd like to know, and make sure everybody knows we are...

21 Replies

981 Views

Last post by 67pontiac
Thu Mar 30, 2023 6:13 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Rich Eagle « Thu Mar 30, 2023 5:31 pm
Posted in OT - Off topic
Replies: 3885
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

35

36

37

38

39
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

What irked KD most about the incident was the whitewashing of his raceabout. It may have been accidental but the difficulty of finding it in the snow was exasperating. The amotimeter reversal had no effect on his machine's pale hue. Not only was KD hours late to the Regatta, but he was also late to Ernie's for Happy Hour. He was already in trouble...
3885 Replies

701693 Views

Last post by Rich Eagle
Thu Mar 30, 2023 5:31 pm
1909-1912 Head

Last post by slang250 « Thu Mar 30, 2023 5:20 pm
Posted in Classifieds - Parts
Replies: 1
by Ashley » Thu Mar 30, 2023 2:22 pm » in Classifieds - Parts

First post

1909-1912 Head, no cracks, has been glass beaded. 5 of the head bolt holes have been made oversize. $500 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230330_141054.jpg
20230330_141050.jpg
20230330_141040.jpg
20230330_141035.jpg

Last post

The head has been spoken for pending payment. Thank You Steve

1 Replies

185 Views

Last post by slang250
Thu Mar 30, 2023 5:20 pm
dash panel and steering column mounting bracket

Last post by Waldo « Thu Mar 30, 2023 5:13 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Fri Mar 03, 2023 9:31 pm » in Classifieds - Parts

First post

for sale: dash panel and steering column mounting bracket top and bottom 1923/25 $45 plus postage
20220528_121237.jpg 20221216_131412.jpg

Last post

looks like you are showing the back side of the panel, what does the front look like? is it straight? any rust pits?

2 Replies

288 Views

Last post by Waldo
Thu Mar 30, 2023 5:13 pm
FS MISCELLANEOUS ITEMS

Last post by Mark Chaffin « Thu Mar 30, 2023 5:03 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Mar 30, 2023 5:00 pm » in Classifieds - Parts

First post

Several miscellaneous items available as described below. Shipping will be an additional charge. PM me or call Mark Chaffin (951) 805-0928

Manifold 1.jpg

Manifold 2.jpg
Economy Manifold accessory. Only one I have ever seen. Excellent condition $125 plus $19.10 domestic USPO Flat Rate.

Bronze 1.jpg

Bronze 2.jpg
Heavy duty bronze...

Last post

Sed Bulb.jpg
26/27 sediment bulb. Looks to be in very good condition. $50.00 plus $9.50 domestic USPO Flat Rate.

Plate.jpg
1913 New Jersey license plate with rare registration tag $125.00 plus $9.50 domestic USPO shipping.

1 Replies

146 Views

Last post by Mark Chaffin
Thu Mar 30, 2023 5:03 pm
‘26 Touring Top Bows

Last post by Humblej « Thu Mar 30, 2023 4:51 pm
Posted in General Discussion Forum
Replies: 1
by Carl » Thu Mar 30, 2023 3:02 pm » in General Discussion Forum

First post

On my ‘26 Touring the top bows ,that fit into the irons , have a “tenon” cut on them …
Does anyone have the length ,between tenons on all four bows ..I’m most concerned about the #1 & #4 bows …
The ones on them right now ,,look original ….But are different than the ones in the kit I got with the car …
They are from the Gentleman that produced them...

Last post

Determine the length of the #1 bow by using the windshield stantion clamps to set the correct length. You can use the #1 bow length for all the other bow lengths. When the top is folded all the bows should line up on the saddle.

1 Replies

82 Views

Last post by Humblej
Thu Mar 30, 2023 4:51 pm
Can anyone identify these windshield hinges 1 pair is black and brass

Last post by Wayne Sheldon « Thu Mar 30, 2023 4:31 pm
Posted in General Discussion Forum
Replies: 4
by FATMAN » Wed Mar 29, 2023 12:24 pm » in General Discussion Forum

First post

Going through some more original parts I ran across these odd and large car windshield hinges one is brass and steel the other all steel, anyone have any ideas? Bob

Last post

The AACA forum has a What Is It? section. It is amazing how some of those people can recognize some really obscure stuff!

Since so much of the hobby has gone to really modern stuff? It is surprising how many real experts on the early stuff are still quite active in that club and on that forum!

From the general design, I would expect that...

4 Replies

261 Views

Last post by Wayne Sheldon
Thu Mar 30, 2023 4:31 pm
Gilmore Museum "Celebration of brass" worth attending?

Last post by Steve Jelf « Thu Mar 30, 2023 3:36 pm
Posted in General Discussion Forum
Replies: 3
by NealW » Thu Mar 30, 2023 1:37 pm » in General Discussion Forum

First post

My wife and I are planning a trip back to NW Ohio to visit my brother and family this summer. I plan on heading to the HF, Piquette museum and a Highland Park drive by with my brother while there. We will be heading up to Mackinac for a couple of days before heading back to Kansas by way of Chicago, and that conveniently takes us past the Gilmore...

Last post

The Gilmore is a must-see, with or without the special weekend. If you can fit those dates into your schedule, yes, go.

IMG_1781 copy.JPG
Stopping at the Gilmore, 2018.

3 Replies

174 Views

Last post by Steve Jelf
Thu Mar 30, 2023 3:36 pm
Sold ! Stewart Speedometer & Swivel

Last post by KWTownsend « Thu Mar 30, 2023 2:24 pm
Posted in Classifieds - Parts
Replies: 4
by KWTownsend » Tue Mar 28, 2023 2:32 pm » in Classifieds - Parts

First post

Stewart Model C, correct for 1913 in very nice condition. Untested, but drum turns when input is turned. $150.

Rebuilt swivel, 2-1/2:1 Rebuilt, very nice. $275

Price is firm, selling for widow.

Free delivery to the Portland Swap Meet this coming weekend.
20230328_111022.jpg

Last post

Both are sold!
Thanks MTFCA

4 Replies

386 Views

Last post by KWTownsend
Thu Mar 30, 2023 2:24 pm
Want to Trade coupe for my touring.

Last post by Sarikatime « Thu Mar 30, 2023 2:24 pm
Posted in Classifieds - Vehicles

by Sarikatime » Thu Mar 30, 2023 2:24 pm » in Classifieds - Vehicles

Would anyone be open to trading your 19 or 20 coupe for my 15 touring? The touring is well equipped with whatever anyone would want but we can discuss details. What do you have.
Frank at 818-254-6797

0 Replies

177 Views

Last post by Sarikatime
Thu Mar 30, 2023 2:24 pm
WTB metal firewall bracket for stewart 160 speedometer

Last post by Reno Speedster « Thu Mar 30, 2023 1:59 pm
Posted in Classifieds - Parts

by Reno Speedster » Thu Mar 30, 2023 1:59 pm » in Classifieds - Parts

I am assembling parts to install a Stewart 160 speedometer on my 22. I am looking for the bracket for mounting the speedo head to the metal dash (see picture). Please get in contact if you have one you would sell. Thanks

0 Replies

50 Views

Last post by Reno Speedster
Thu Mar 30, 2023 1:59 pm
Messenger wire wheels

Last post by Scott_Conger « Thu Mar 30, 2023 1:48 pm
Posted in General Discussion Forum
Replies: 20
by Tracer » Sun Oct 23, 2022 5:10 am » in General Discussion Forum

First post

Hi All
I have a set of Messenger wire wheels that suit a T. I am trying to find some information on how the hubcaps work? I am missing them all. Any information would be greatly appreciated
I believe these wheels were made in Canada

Last post

Have fun and post progress. This will be quite a project.

20 Replies

1703 Views

Last post by Scott_Conger
Thu Mar 30, 2023 1:48 pm
Help for mesurement about reflector for Gas Headlight

Last post by Quickm007 « Thu Mar 30, 2023 1:13 pm
Posted in General Discussion Forum
Replies: 3
by Quickm007 » Thu Mar 30, 2023 9:32 am » in General Discussion Forum

First post

I found an 1914 original glass mirror Reflector for gas headlight in usable condition but it's appear the diameter is too small and doesn't fit. Someone know what is the correct measurement ? The actual glass I have is 6''. The head light I have is Corcoran Lamp Co made for Ford Cin'ti. Also, if you could post the way how it is fit inside of the...

Last post

Thank you John,I had intalled the 3 back edge where flathead screws would go to hold the mirror in place, but it had the gap which not allowed me to keep the mirror in place. Lang's do not have the insulation pads that go between the back of the mirror and the bottom of the headlight. You may know another vendor maybe. I will try to post tonight a...

3 Replies

135 Views

Last post by Quickm007
Thu Mar 30, 2023 1:13 pm
Paintings that aren't Model Ts

Last post by Rich Eagle « Thu Mar 30, 2023 12:54 pm
Posted in OT - Off topic
Replies: 196
by Rich Eagle » Thu Mar 14, 2019 9:54 am » in OT - Off topic
1

2
First post

Finally I have stopped working on this one. After 170 hours it is not getting any better. I will turn it to the wall for a few months and then decide if I like it.
ModelS.jpg
You may recall that Herb offered this terrific photo a while back:

and Rob discovered some amazing information on Doctor Pagel who likely owned it:

Here are some steps...

Last post

Herb and I were discussing how delightful it would be to have one of the first production Fords. I have developed a fascination for the rear entrance door on many London to Brighton cars.
04ACsk.jpg
I painted this based on a 1904 Model AC Ford that was for sale on the Bonham's site. I studied many photos to see how the door would look opened....
196 Replies

41953 Views

Last post by Rich Eagle
Thu Mar 30, 2023 12:54 pm
Should I hot rod it?

Last post by Adam « Thu Mar 30, 2023 12:53 pm
Posted in General Discussion Forum
Replies: 8
by TheSpeedsterProject » Wed Mar 29, 2023 7:54 pm » in General Discussion Forum

First post

So I hurt my back and I'm down for a bit - so I grabbed the laptop and edited the last of the footage I took pre-tweak.

Here it is for those interested:

It's two parts - skip what you don't like.

In the video I discuss options on what I could do to the fordor. I can't sell it as is cause something inside is clearly not right and I can't move...

Last post

It takes 3 hours to completely remove a T engine from a Fordor Sedan.

It takes 6 hours to install an engine and completely put everything back together (steering, radiator, starter, wishbone, axle connections, & initial adjustment).

Once you get the engine on the stand; Removing and disassembling the trans and diagnosis is about an hour and a...

8 Replies

633 Views

Last post by Adam
Thu Mar 30, 2023 12:53 pm
**FATE**

Last post by Rich P. Bingham « Thu Mar 30, 2023 12:40 pm
Posted in OT - Off topic
Replies: 42
by Professor Fate » Sat Sep 10, 2022 9:52 pm » in OT - Off topic

First post

20210918_104823.jpg

Last post

It's one of the best examples of the height of movie entertainment. Wonderfully visual, well acted, light hearted comedy, and a superb musical score. We can hope for a renaissance, but if it comes, it will be much different.

From a historical perspective, in 1964 we were much closer to all the elements of that scenario, the cars, the dress, the...

42 Replies

3044 Views

Last post by Rich P. Bingham
Thu Mar 30, 2023 12:40 pm
Why Can I Not Post Photos?

Last post by Norman Kling « Thu Mar 30, 2023 12:03 pm
Posted in General Discussion Forum
Replies: 12
by BLB27 » Tue Mar 28, 2023 9:29 pm » in General Discussion Forum

First post

Why can't I post photos that are taken with my phone in vertical position?

Last post

I wouldn't even know whether or not you can load directly from your phone. However all my pictures are loaded into the computer under My Pictures. Whether or not they came from a phone or from someone else's e-mail. My wife does Facebook and she sometimes loads the pictures to MY pictures. I take them from My pictures directly to the forum. Then I...

12 Replies

295 Views

Last post by Norman Kling
Thu Mar 30, 2023 12:03 pm
FS—> 1912 Wisconsin Tag.

Last post by Runabout « Thu Mar 30, 2023 11:49 am
Posted in Classifieds - Parts
Replies: 5
by Runabout » Tue Mar 28, 2023 7:46 pm » in Classifieds - Parts

First post

Nice 1912 Wisconsin license plate, $150 plus shipping.
4 Ball Kingston Carburetor. Ran extremely well and idled like a dream on my 1915 T then it took a dump and started leaking fuel, I’m sure a needle valve and seat is needed, $250. plus shipping. I’ve got the correct carburetor for my T now so this one is available....

Last post

Tag is spoken for, pending payment….Thanks Tim. I didn’t get your PM please resend or call.

5 Replies

328 Views

Last post by Runabout
Thu Mar 30, 2023 11:49 am
Is it 110 or 240 volt

Last post by ABoer « Thu Mar 30, 2023 11:05 am
Posted in General Discussion Forum
Replies: 14
by ABoer » Sun Mar 26, 2023 9:44 am » in General Discussion Forum

First post

From a friend I got a Octopus Growler ,he is made in England .
Here in the Netherlands we have 240 Volt AC .
So I like to know or this growler is 110 or 220 Volt .
Thanks for your answer .

Toon 001.JPG 002.JPG 003.JPG

Last post

Thanks for all the information !!!!!
Toon

14 Replies

681 Views

Last post by ABoer
Thu Mar 30, 2023 11:05 am
MERCURY FRONT AXLE for sale

Last post by Jonny Eriksson « Thu Mar 30, 2023 10:51 am
Posted in Classifieds - Parts
Replies: 2
by Jonny Eriksson » Sun Mar 26, 2023 3:32 pm » in Classifieds - Parts

First post

I’m selling one of my Mercury front axles. Good condition and with good threads.
$3000 plus shipping. Located in Sweden.

Last post

Back to top

2 Replies

593 Views

Last post by Jonny Eriksson
Thu Mar 30, 2023 10:51 am
Measuring piston clearance after rebore

Last post by RGould1910 « Thu Mar 30, 2023 10:40 am
Posted in General Discussion Forum
Replies: 16
by BobUkPipedream » Tue Mar 28, 2023 3:40 pm » in General Discussion Forum

First post

Hi All,

Well I am slowly progressing, crank is now good as are the con rods all at 1.5 thou clearance with no binding. They were a pig to balance, I ended up doing twenty measurements and averaging…

So I thought I would check my pistons. These are new cam ground 0.20 oversize. I told the machine shop that bored the block to go with 0.0035...

Last post

Amen to avoid having others do work on your car. I'm convinced that shabby workmanship is the reason we do as much as we can ourselves. When I started in this hobby, the only tools I owned were carried in a tool pouch. Gradually I learned how to do most things needed to restore a car. I still farm out some things but am darn careful who I choose...

16 Replies

552 Views

Last post by RGould1910
Thu Mar 30, 2023 10:40 am
For Sale: PRICE REDUCED Very Large Brass Head or Side Lamp European c. 1900-1905

Last post by GGZ « Thu Mar 30, 2023 10:33 am
Posted in Classifieds - Parts
Replies: 7
by GGZ » Thu Feb 02, 2023 5:06 pm » in Classifieds - Parts

First post

Price Reduced to 325.00 with shipping in USA

Here is a great, European or British all brass lamp. This could be a very large side lamp or a headlamp. It is all brass and is in nice condition with a good beveled lens. Very high quality. It measures about 16 tall and 7 3/8 rim and 6 3/4 in depth. A great lamp that would date from approximately...

Last post

Reduced to 250.00 includes shipping within the USA!

7 Replies

811 Views

Last post by GGZ
Thu Mar 30, 2023 10:33 am
For Sale:PRICE REDUCED! Early Large Brass Solar 128-C Side Lamp c. 1908-1912

Last post by GGZ « Thu Mar 30, 2023 10:32 am
Posted in Classifieds - Parts
Replies: 7
by GGZ » Thu Feb 02, 2023 3:36 pm » in Classifieds - Parts

First post

Price reduced to 175.00 includes USA shipping.

Here is a nice, original, brass, large size Solar Model 128-C side lamp from the 1908-1912 era. This large lamp is about 11 tall and 7 1/4 diameter rim. The large round lens has a crack but the side lamp and red jewel are good. It has the Solar tag on the front as well as the Solar stamp on the...

Last post

Price reduced to 130.00 including shipping in the USA!

7 Replies

700 Views

Last post by GGZ
Thu Mar 30, 2023 10:32 am
FS Stromberg OF carb

Last post by KimDobbins « Thu Mar 30, 2023 10:28 am
Posted in Classifieds - Parts
Replies: 1
by KimDobbins » Tue Mar 28, 2023 6:16 pm » in Classifieds - Parts

First post

For Sale is a NOS gold plated Stromberg OF. Complete beautiful carb. $800.00. Kdmks AT att.net.

Last post

Back to top

1 Replies

376 Views

Last post by KimDobbins
Thu Mar 30, 2023 10:28 am
Upholstery with patina

Last post by Model T Matt « Thu Mar 30, 2023 9:59 am
Posted in General Discussion Forum
Replies: 2
by Allan » Thu Mar 30, 2023 5:53 am » in General Discussion Forum

First post

20230330_092717.jpg

In Bushmike's post on his re-awakening his TT, he mentioned new upholstery for it. I suggested using pre-used material.

Here is the trim in Henrietta. Her upholstery was all bu eaten out by mouse plagues during her 63 year slumber. This upholstery was in a car I restored for a customer. I kept it for patterns so others could...

Last post

Had a friend that got a few old leather couches to redo his car

2 Replies

204 Views

Last post by Model T Matt
Thu Mar 30, 2023 9:59 am
Ford Script keys $8 ea shipped

Last post by fordrelic « Thu Mar 30, 2023 8:36 am
Posted in Classifieds - Parts

by fordrelic » Thu Mar 30, 2023 8:36 am » in Classifieds - Parts

I have several keys left, but Sold out of these 53,55,58,59,63,64,67 and 69.

Still have other numbers while supplies last.

$8 ea includes shipping to lower 48.

Thanks to all that have ordered keys,
fordrelic

0 Replies

58 Views

Last post by fordrelic
Thu Mar 30, 2023 8:36 am
Redwood Empire Model T Club Garage Day

Last post by AndyClary « Wed Mar 29, 2023 11:36 pm
Posted in General Discussion Forum

by AndyClary » Wed Mar 29, 2023 11:36 pm » in General Discussion Forum

On March 18th I hosted an ignition system clinic at my shop. About 18 members attended enjoying donuts and coffee with a shoebox swap meet before hand. Using a variety of parts and tooling we went over the basics of the model T ignition system. I think everyone picked up something and I had to dig a little to answer some of the questions.

With...

0 Replies

149 Views

Last post by AndyClary
Wed Mar 29, 2023 11:36 pm
The Time Machine

Last post by JTT3 « Wed Mar 29, 2023 9:25 pm
Posted in General Discussion Forum
Replies: 61
by BUSHMIKE » Fri Mar 10, 2023 10:44 am » in General Discussion Forum

First post

We did a 1400 mile, 26hr turn & burn on the retrieval to my new to me 1926 TT. We aptly named it the Time Machine. The condition of the cab is nothing short of amazing! The previous owner scuff sanded and cleared the lower panel behind the drivers door and with that exception the paint is 100% Henry Ford original! Not a single bit of rust other...

Last post

Mike you could save the original head if you wanted to. Stop drill it both ends, v the crack and use some marine tex or if you’d like JB weld. It may actually hold for you. I know now you can find a good head fairly cheap but there was a time that it was tuff hoeing and you did what you had to do to get by. Love the updates. Best John

61 Replies

2381 Views

Last post by JTT3
Wed Mar 29, 2023 9:25 pm
Grade B cast iron specifications

Last post by John E. Guitar « Wed Mar 29, 2023 9:14 pm
Posted in General Discussion Forum
Replies: 3
by John E. Guitar » Wed Mar 29, 2023 4:44 pm » in General Discussion Forum

First post

The valve head drawing (15th Jan 1927) lists the material as Grade B cast iron. I'm wondering if anyone has the specifications on this material?

I've seen other threads referencing Shop Theory - The Henry Ford Trade School listing the composition of EE steel and other materials. Does anyone have a copy of this that could check?

Last post

Thank you Scott & Dan.

I found Ford Methods and The Fords Shop on archive.org. That looks like it's full of great information. I'll keep an eye out for an original copy.

3 Replies

257 Views

Last post by John E. Guitar
Wed Mar 29, 2023 9:14 pm
Model T Snowmobile Question

Last post by Boaski « Wed Mar 29, 2023 8:43 pm
Posted in General Discussion Forum
Replies: 12
by Boaski » Mon Mar 27, 2023 8:13 pm » in General Discussion Forum

First post

I'm looking for some input and advice regarding how realistic an idea I have is.

Here is a little background information: I'm looking at retiring in about 5 years and we'll probably be downsizing shortly thereafter (or so I've been told...). My main hobbies have been vintage and antique snowmobiles as well as some old tractors & a few old cars &...

Last post

Good idea or not living in the high desert of Nevada
I had biuld it once I found it but I've been told they work in dirt to we see this summer

There must be snow somewhere in Nevada as I see vintage snowmobiles pop up for sale from there.

Todd,

I sent you an email.

If you had storage space, It would be easier to have two vehicles and only...

12 Replies

505 Views

Last post by Boaski
Wed Mar 29, 2023 8:43 pm
Does anyone know what this is?

Last post by TRDxB2 « Wed Mar 29, 2023 8:19 pm
Posted in General Discussion Forum
Replies: 2
by kgibbo » Wed Mar 29, 2023 6:54 pm » in General Discussion Forum

First post

Windshield decal - there when I purchased.

Last post

A parking permit for the Epping*Forest Yacht & Country Club

2 Replies

327 Views

Last post by TRDxB2
Wed Mar 29, 2023 8:19 pm
Stromberg Hot Spot Manifold SOLD

Last post by Scott_Conger « Wed Mar 29, 2023 8:16 pm
Posted in Classifieds - Parts
Replies: 8
by rickd » Wed Mar 29, 2023 12:46 pm » in Classifieds - Parts

First post

Stromberg Hot Spot Manifolds with the correct and original hot spot control valve. Both manifolds and control valve are in good shape. Includes a copy of Stan Howes' OF and Hot Spot instruction manual. $350.00+$40.00 UPS shipping. Check or money order. Email me through this site if interested or have any questions. H1.jpg H2.jpg H3.jpg H4.jpg

Last post

Ken

Granted, it looks similar, but no it is not the same thing but is darn near if not exactly the same stuff that older gas can nozzles were made from. A flat wound, interlocking flat ribbon of plated steel. I actually have some older steel gerry cans that I store fuel in here at the cabin and they have this exact flexible spout but too large in...

8 Replies

352 Views

Last post by Scott_Conger
Wed Mar 29, 2023 8:16 pm
service in Colorado?

Last post by Scott_Conger « Wed Mar 29, 2023 8:12 pm
Posted in Services
Replies: 1
by Barteldes » Wed Mar 29, 2023 4:52 pm » in Services

First post

Does anyone know of service help i can get in colorado, fixing things that i can't do myself?

Last post

Bill, there is a significant number of folks in your immediate metro area. I think all you need to do is acquaint yourself with a local club and make specific needs known and help will present itself.

amendment: A quick search of Forum Members posting here shows 40 active Forum members, with a number of them located in the Denver metro area

1 Replies

37 Views

Last post by Scott_Conger
Wed Mar 29, 2023 8:12 pm
Tea cup pan

Last post by KimDobbins « Wed Mar 29, 2023 7:20 pm
Posted in Classifieds - Parts
Replies: 2
by Dollisdad » Wed Mar 29, 2023 1:48 pm » in Classifieds - Parts

First post

Looking for 11-13 tea cup pan. Either one will do.

Thanks Tom

Last post

Tom, I have a 1913 tea cup 3 rivet pan. I’ll bring it to Tulare.

2 Replies

350 Views

Last post by KimDobbins
Wed Mar 29, 2023 7:20 pm
knocking engine

Last post by speedytinc « Wed Mar 29, 2023 6:27 pm
Posted in General Discussion Forum
Replies: 40
by ElGranadaT » Mon Mar 27, 2023 7:39 pm » in General Discussion Forum

First post

Hello all,

I finally got my 22 touring barn find running today. It starts ok its firing on all cylinder well but it has a clear knock. The knock is in time with one of the pistons and it gets progressively louder as it heats up. After a few minutes it gets VERY loud and the engine slows to a stop.

this is not good -

My guess is its a bearing...

Last post

Check that internal oil line. (it looks like a piece of copper tubing in a picture). I wonder whats going on with that.
# 1 rod & piston are the first to fail under a lack of oil.
Part of the why or one bore too tight?

40 Replies

896 Views

Last post by speedytinc
Wed Mar 29, 2023 6:27 pm
Yet another puzzle

Last post by Rich Eagle « Wed Mar 29, 2023 4:52 pm
Posted in OT - Off topic
Replies: 428
by Rich P. Bingham » Sun Apr 10, 2022 11:26 am » in OT - Off topic
1

2

3

4

5
First post

Sis helping Dad to . . . ? An appealing photo, but what's the make and midel of the car ?? :lol: (No date or location for the pic)

Last post

It's fun to look back into those days, isn't it?
Thanks for posting those.
Rich
428 Replies

23099 Views

Last post by Rich Eagle
Wed Mar 29, 2023 4:52 pm
Factory drawing of two piece valve

Last post by John E. Guitar « Wed Mar 29, 2023 4:52 pm
Posted in General Discussion Forum
Replies: 19
by John E. Guitar » Wed Mar 22, 2023 3:34 am » in General Discussion Forum

First post

Does anyone have a factory drawing of the two piece valve? Any year would be ok.

I'm putting together an article for our local club magazine and am after the material for the head and stem & also details on how the two are joined.

Last post

I received valve drawings from the Benson Ford Research Center. These are dated 15th January 1927.

The valve stem is cold drawn steel Type EE and the valve head is Cast Iron Grade B.

Only the stem has rolled grooves, 18 per inch for 5/8 . The two items are electric welded together.

The chart is from Shop Theory - Henry Ford Trade School 1943...

19 Replies

963 Views

Last post by John E. Guitar
Wed Mar 29, 2023 4:52 pm
This was trucking-Old Photos

Last post by Rich Eagle « Wed Mar 29, 2023 4:50 pm
Posted in OT - Off topic
Replies: 1242
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

9

10

11

12

13
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

Several nice photos of this 1923 Packard Model EC Fire Engine are on the Classic Driver site. I enjoy seeing well preserved machines so this caught my eye. Perhaps others will too.
PackrdFrTk.jpg
1242 Replies

269760 Views

Last post by Rich Eagle
Wed Mar 29, 2023 4:50 pm
Interesting town car auction

Last post by Wayne Sheldon « Wed Mar 29, 2023 4:47 pm
Posted in General Discussion Forum
Replies: 7
by ThreePedalTapDancer » Wed Mar 29, 2023 11:34 am » in General Discussion Forum

First post

Pictures of other cars in the estate auction

Last post

I have never been a big fan of the towncars. However, I do appreciate them, and consider them to be an important part of automotive history!
If the casting date on the engine is to be believed, it would make this a very early 1917 model! True 1917 models are somewhat rare, and the photos do not do a good job of showing just how correct (or not?)...

7 Replies

432 Views

Last post by Wayne Sheldon
Wed Mar 29, 2023 4:47 pm
Services - Read This

Last post by Barteldes « Wed Mar 29, 2023 4:45 pm
Posted in Services
Replies: 12
by ChrisB » Mon Feb 01, 2021 9:33 pm » in Services

First post

For anyone providing services to the Model T hobby.

Over the next little while we will be moving these types of topics into here as we see them.

Chris

Last post

I had forgot all about Ronco until I saw where it was mentioned above.

Ronco Kitchen Accessories & Cooking Innovation

Known for the legendary tagline “But wait...there's more,” Ronco has been creating innovative, cutting-edge kitchen appliances and accessories for almost ...
‎Shop All Products · ‎Customer Care · ‎Ronco Pocket Fisherman ·...

12 Replies

4427 Views

Last post by Barteldes
Wed Mar 29, 2023 4:45 pm
Low Head SOLD

Last post by rickd « Wed Mar 29, 2023 4:30 pm
Posted in Classifieds - Parts

by rickd » Wed Mar 29, 2023 4:30 pm » in Classifieds - Parts

Excellent condition low head. Spark plug threads are all good. $225.00+$50.00 UPS shipping. Check or money order. Email me through this site. L1.jpg L2.jpg L3.jpg L4.jpg

0 Replies

180 Views

Last post by rickd
Wed Mar 29, 2023 4:30 pm
On marketplace

Last post by 1913Runabout « Wed Mar 29, 2023 4:29 pm
Posted in Classifieds - Parts
Replies: 1
by Dollisdad » Wed Mar 29, 2023 2:07 pm » in Classifieds - Parts

First post

$300. Castle rock, Washington CA1B8C8C-F400-4001-BB73-70F6045CA76E.jpeg AD3ACC50-D677-48C8-98FE-8F9DED06C696.jpeg

Last post

Message sent

1 Replies

413 Views

Last post by 1913Runabout
Wed Mar 29, 2023 4:29 pm
Grease hemorrhage

Last post by speedytinc « Wed Mar 29, 2023 3:41 pm
Posted in General Discussion Forum
Replies: 10
by M.Sinclair » Tue Mar 28, 2023 9:31 pm » in General Discussion Forum

First post

Hello,
Broke out the t for the first time and noticed a flow of grease and oil out of the u joint. It was grease followed shortly after by a mix of oil. I believe the grease melted and flowed out. What grease should be used in the u joint?
Regards,
Matthew

Last post

John, If the oil hole is on the bottom, will it allow a lot more oil to flow through the 4th main going up hills? I understand from a discussion with Gene French that many 4th mains have no hole.

Possibly a little bit more. Not a lot more since oil still enters around the mains open end. Also the spinning spring retainer cup shields the end...

10 Replies

440 Views

Last post by speedytinc
Wed Mar 29, 2023 3:41 pm
How to Unstrangle your Kingston L-4... The New Kingston Super Valve - a few left

Last post by Scott_Conger « Wed Mar 29, 2023 3:39 pm
Posted in Classifieds - Parts

by Scott_Conger » Wed Mar 29, 2023 3:39 pm » in Classifieds - Parts

A number of folks who expressed an interest in these have failed to follow through, so I am left with a few spares that I did not anticipate having. Contact me through email if you are interested in owning one. There is not an unlimited supply and I am still conflicted as to the real need/demand for these things, so please understand that it is...

0 Replies

119 Views

Last post by Scott_Conger
Wed Mar 29, 2023 3:39 pm
Revitalizing Chickasha Pre-War swap meet

Last post by Dan Hatch « Wed Mar 29, 2023 3:24 pm
Posted in General Discussion Forum
Replies: 63
by JTT3 » Mon Mar 20, 2023 2:31 pm » in General Discussion Forum

First post

If this post is not in compliance with the MTFCA / Forum I will delete my post & ask Chris to delete the thread.

In an effort to help with ideas on how we can make Chickasha pre-war swap meet a must go to event, what would you do.
I encourage your constructive input, try not to just be negative. Sure you have to talk about a problem but have a...

Last post

As far as early swapping in line for let in. I don’t remember it going on too much at Hershey. When I was on the White field I don’t think I ever saw it. We could only line up the morning of and everyone was scared of not getting in when they let us in.
Same now on Chocolate, park so close can’t open up trailers.
We will see at Luray in about a...

63 Replies

2396 Views

Last post by Dan Hatch
Wed Mar 29, 2023 3:24 pm
Upholstering my ‘24 Touring

Last post by CudaMan « Wed Mar 29, 2023 3:17 pm
Posted in General Discussion Forum
Replies: 5
by Harvey Bergstrom » Tue Mar 28, 2023 9:27 pm » in General Discussion Forum

First post

I will be upholstering my touring car this spring and want to know if anyone has any photos of the job anyone else has done. I got a kit from Classtique & it is beautiful! Of course I don’t want to mess it up in any way, so just trying to do some homework before tackling the job. Any photos and comments appreciated!

Last post

Push pins are your friend, they allow you to easily shift the material before you staple or tack it down for good. :)

5 Replies

189 Views

Last post by CudaMan
Wed Mar 29, 2023 3:17 pm
Anyone seen a hub like this?

Last post by Jerry VanOoteghem « Wed Mar 29, 2023 2:42 pm
Posted in General Discussion Forum
Replies: 10
by TWrenn » Wed Mar 29, 2023 8:43 am » in General Discussion Forum

First post

During our club's tech session last night, Joe Bell showed us a rear wheel with an interesting hub on it. As you can see it's got six flats on it that are also pretty well beat to crap. Apparently someone had trouble getting the wheel off the axle. The felloe clamps do indicate it's a Hayes wheel FWIW. Anyone seen one like it? Aftermarket hub...

Last post

Who'd-a guessed?

I DID! Literally 30 minutes after you asked. :lol: :)

Jerry...you're kidding!!?!
What's the odds? :lol:

Pretty good I guess...

10 Replies

380 Views

Last post by Jerry VanOoteghem
Wed Mar 29, 2023 2:42 pm
Hentietta's new wheel.

Last post by Harvey Bergstrom « Wed Mar 29, 2023 1:58 pm
Posted in General Discussion Forum
Replies: 2
by Allan » Wed Mar 29, 2023 1:53 am » in General Discussion Forum

First post

For some time now one rear wheel was talking to me as we rounded corners. It had already had a farm fix with metal wedges driven between spokes. I had tightened the hub bolts and re-peened the bolts, but looseness in the tenons could not be fixed. The difficulty was finding a sound replacement with the same weathered look. In the end I gave up...

Last post

If only these vehicles could talk, the stories they would tell!

2 Replies

252 Views

Last post by Harvey Bergstrom
Wed Mar 29, 2023 1:58 pm
Luray

Last post by Will_Vanderburg « Wed Mar 29, 2023 1:56 pm
Posted in General Discussion Forum

by Will_Vanderburg » Wed Mar 29, 2023 1:56 pm » in General Discussion Forum

Anyone bringing good usable ‘22 fenders to Luray this year? I may be in the market if price and my wallet can come to terms.

0 Replies

98 Views

Last post by Will_Vanderburg
Wed Mar 29, 2023 1:56 pm
RARE TOOL, STEVENS T-181

Last post by Chaffins « Wed Mar 29, 2023 1:52 pm
Posted in Classifieds - Parts
Replies: 7
by Chaffins » Sun Mar 26, 2023 6:00 pm » in Classifieds - Parts

First post

STEVENS T-181 THREAD CHASING TOOL, MODEL T HUB, RARE $1,000.00 STEVENS T-181.jpg

Last post

BACK TO TOP

7 Replies

885 Views

Last post by Chaffins
Wed Mar 29, 2023 1:52 pm
FAIRBANKS SCREW PRESS

Last post by RGould1910 « Wed Mar 29, 2023 1:51 pm
Posted in Classifieds - Parts
Replies: 20
by Chaffins » Sat Mar 11, 2023 5:42 pm » in Classifieds - Parts

First post

THIS IS THE MOST VALUABLE TOOL I HAVE IN MY SHOP. IT WILL STRAIGHTEN ANYTHING. CAMSHAFTS, CRANKSHAFTS, DRIVE SHAFTS, FRONT AXLES, REAR AXLES. , REAR AXLE HOUSINGS. I WOULD NOT SELL IT IF I WASN'T SO OLD. $6.000.00 951-735-4791 DSC0433 PRESS.JPG

Last post

No problem, be good to see you on Tulare

20 Replies

2062 Views

Last post by RGould1910
Wed Mar 29, 2023 1:51 pm
KR WILSON AND DIXIE SHOP EQUIPMENT

Last post by Chaffins « Wed Mar 29, 2023 1:42 pm
Posted in Classifieds - Parts
Replies: 4
by Chaffins » Fri Mar 24, 2023 1:33 pm » in Classifieds - Parts

First post

DIXIE FRONT END AND REAR END REBUILDING STAND. THIS STAND IS BETTER THAN THE KR WILSON AS IT IS MORE FLEXABLE $2,000
KR WILSON MODEL T & A ENGINE STAND WITH TOOL TRAY $1,800
KR WILSON MODEL T & A ENGINE STAND WITH TOOL TRAY AND ROLLER BASE $2,500
PAN STRAIGHTENING STAND $2,000 SOLD
TRANSMISSION BALANCING STAND $800
KR WILSON COMBINATION MACHINE...

Last post

BACK TO TOP

4 Replies

632 Views

Last post by Chaffins
Wed Mar 29, 2023 1:42 pm
RUCKSTELL BOOK, HALF PRICE

Last post by Chaffins « Wed Mar 29, 2023 1:39 pm
Posted in Classifieds - Parts
Replies: 18
by Chaffins » Tue Mar 21, 2023 4:53 pm » in Classifieds - Parts

First post

GLOVER E. RUCKSTELL AND THE RUCKSTELL AXLE RETAIL PRICE $34.95 GET YOUR COPY WHILE THE SUPPLY LASTS FOR HALF PRICE $22.50 POSTAGE PAID, FOREIGN SHIPPING AT COST
951-735-4791 1939 S. MAIN ST. CORONA, CAL 92882
RUCKSTELL BOOK.docx BOOK_ADS.pdf

Last post

BACK TO TOP

18 Replies

780 Views

Last post by Chaffins
Wed Mar 29, 2023 1:39 pm
VR on generator

Last post by speedytinc « Wed Mar 29, 2023 1:32 pm
Posted in General Discussion Forum
Replies: 17
by kgibbo » Mon Mar 27, 2023 10:30 pm » in General Discussion Forum

First post

I’ve heard that a Voltage Regulator (cutout look alike) is smarter than the original generator cutouts. How is the generator third brush adjusted when a VR is used…or does it even matter?

Last post

Curious that one VR can work for 6, 12, and 24 volt systems? I’m no electrical engineer but that just doesn’t sound right to me.

Because ITS NOT A VOLTAGE REGULATOR. Its an electronic cutout. Can be built with one diode.
I have made my own. One selects a diode that covers the voltage /amp output maximum output from the generator.
Like 40V, 50...

17 Replies

509 Views

Last post by speedytinc
Wed Mar 29, 2023 1:32 pm
2023 Golden Gate Tour, May 28 - June 3. A few spots are still available.

Last post by TWrenn « Wed Mar 29, 2023 1:03 pm
Posted in General Discussion Forum
Replies: 2
by NorthSouth » Wed Mar 29, 2023 12:15 pm » in General Discussion Forum

First post

The Brass Era, 6 Day, 2023 Golden Gate Tour will start on Sunday evening, May 28, 2023 at the Mill Valley Travelodge for 4 nights. Call (415) 569-3948 for reservations (no group block). Make reservations now if you plan to attend!

Then, we progress to the Creekside Inn - Russian River, on Thursday, June 1 for two more nights. Call 707-869-3623...

Last post

I wanna go on that tour so so bad! But the 4 day drive out and another back with hotels and fuel its just too much cost for me.

2 Replies

69 Views

Last post by TWrenn
Wed Mar 29, 2023 1:03 pm
Dise brakes are sold

Last post by Perry Goble « Wed Mar 29, 2023 12:07 pm
Posted in Classifieds - Parts

by Perry Goble » Wed Mar 29, 2023 12:07 pm » in Classifieds - Parts

The dise brakes are sold thank you mtfca

0 Replies

160 Views

Last post by Perry Goble
Wed Mar 29, 2023 12:07 pm
Speedometer swivel bracket?

Last post by Original Smith « Wed Mar 29, 2023 12:04 pm
Posted in General Discussion Forum
Replies: 4
by Steve Jelf » Tue Mar 28, 2023 5:15 pm » in General Discussion Forum

First post

The clamp-on swivel bracket on my 1915 didn't want to stay put. So I bought a #2696B spindle arm, the one with a hole in it for a swivel bracket. I thought it would be pretty simple to make a bracket that would take a bolt through the hole and remain solidly in place. But it turns out the hole is tapered. I expect I can make a tapered part that...

Last post

Do your homework Steve! 1915 brackets are all by themselves. I think they are being reproduced in brass. You may luck out and find an original. I bought a NOS original from Alvin Anderson back in the sixties for $3! How many of you remember him?

4 Replies

275 Views

Last post by Original Smith
Wed Mar 29, 2023 12:04 pm
Source for rocky mountain brakes

Last post by Original Smith « Wed Mar 29, 2023 11:59 am
Posted in General Discussion Forum
Replies: 3
by Nv Bob » Tue Mar 28, 2023 3:31 pm » in General Discussion Forum

First post

I have sent rocky mtn brake an email with not reply
Just need afew small things for TT brake setup

Last post

There is nothing like the originals! A simple 3/16 cable to an equalizer, and a clamp to the standard brake pedal. The new ones work well, but why did Jack Sunderlin do it this way? He started off making them correctly, but got side tracked and thought all equalizers were alike, and that is why they now use the Bennett style equalizer. If he would...

3 Replies

275 Views

Last post by Original Smith
Wed Mar 29, 2023 11:59 am
Pre 1918 rear axle

Last post by Original Smith « Wed Mar 29, 2023 11:49 am
Posted in General Discussion Forum
Replies: 8
by Craig Leach » Sun Mar 26, 2023 3:42 pm » in General Discussion Forum

First post

Hi guy's
I'm putting together a rear for a upcoming project and found out the axle is a pre 1918. This has thrown a monkey wrench in my plans
on several points. First using the outside seals I prepurchased is out of the question. Fortunately Az Terry has a pair of early 2510 caps.
The other issue is there dosen't seem to be enough room for a...

Last post

Another change on the 1918 rear housing is they lowered the filling plug.

8 Replies

431 Views

Last post by Original Smith
Wed Mar 29, 2023 11:49 am
Waking up a Sleepy T

Last post by TXGOAT2 « Wed Mar 29, 2023 11:48 am
Posted in General Discussion Forum
Replies: 26
by Model T Ron » Sun Mar 26, 2023 9:06 pm » in General Discussion Forum

First post

I have had my 1924 Coup for about a month now but prior she was not used much for the last 4 years. The first thing I did was remove the package shelf and move the seat back 5 inches. This took a bit longer than expected as I found some wood rot that needed to be fixed... It was a bit of work but well worth the gained legroom. Then it was on to...

Last post

Those Ts are all the same. They're all black, and Henry Ford was a tightwad who paid the workers 5 cents a day and made them eat broccoli!

26 Replies

897 Views

Last post by TXGOAT2
Wed Mar 29, 2023 11:48 am
Los Angeles to New York

Last post by Original Smith « Wed Mar 29, 2023 11:45 am
Posted in General Discussion Forum
Replies: 6
by Dollisdad » Wed Mar 29, 2023 12:23 am » in General Discussion Forum

First post

9BD84D44-26F8-4A00-8BE0-F5B1846E5B7A.jpeg BB8D0C38-7141-477C-B076-2C7AF05B465B.jpeg 5CE226ED-95F4-4D74-ADA7-A16A330BEB4D.jpeg 7DD4C423-8693-4A98-88D1-FE62CC12F65B.jpeg

Last post

Don Lang had a real nice one at Hershey a few years back. Dan Killecut owns it now.

6 Replies

348 Views

Last post by Original Smith
Wed Mar 29, 2023 11:45 am
FS Speedster Parts

Last post by Perry Goble « Wed Mar 29, 2023 11:40 am
Posted in Classifieds - Parts
Replies: 1
by Perry Goble » Wed Mar 29, 2023 11:38 am » in Classifieds - Parts

First post

Everything you need to turn your standard T chassis into a speedster . small drum Ruckstell rear end , shifter shaft and gear shaft handle used but in good condition , I boult it from Mark Chaffin . aluminum Warford with shortened radius rods and drive shaft rebuilt by Henry K Lee . He is the best . steering column with lower gear box , coupler ,...

Last post

My phone # is 512 234 0243 Perry

1 Replies

265 Views

Last post by Perry Goble
Wed Mar 29, 2023 11:40 am
1915 Model T Touring

Last post by NorthSouth « Wed Mar 29, 2023 11:39 am
Posted in Classifieds - Vehicles
Replies: 7
by lsinclair » Fri Aug 26, 2022 8:02 am » in Classifieds - Vehicles

First post

For Sale: Model T Touring, older restoration $22,500.00

Last post

Another one.

7 Replies

3479 Views

Last post by NorthSouth
Wed Mar 29, 2023 11:39 am
WTB: 1926 rear spring clamp, longer than the normal one

Last post by Adam « Wed Mar 29, 2023 11:24 am
Posted in Classifieds - Parts
Replies: 7
by bmklawt » Thu Mar 23, 2023 11:18 pm » in Classifieds - Parts

First post

Learned something new today, evidently there is a longer than the normal rear spring clamp (U bolt) and I need to find a pair of the long ones for my 1927 Touring. Let me know if you have 1 or 2 your willing to part with
Picture from an old post

Last post

That is interesting… The illustration of 3833 & 3833b is from a ‘29 parts book, so should be the latest (most recent) variation of that part. I was going to try mine in a late crossmember, but didn’t because it is an exact match to the illustration.

So apparently, the one you have that is long enough for a 9 leaf spring but that will not fit a...

7 Replies

391 Views

Last post by Adam
Wed Mar 29, 2023 11:24 am
townsend aluminum connecting rods

Last post by Gene_French « Wed Mar 29, 2023 10:54 am
Posted in Classifieds - Parts
Replies: 1
by Gene_French » Wed Mar 22, 2023 9:56 am » in Classifieds - Parts

First post

for sale : set of Townsend auto. cast aluminum connecting rods ... these are designed for use in fitting Model A crankshaft into Model T motor block ... the machining instructions are included ... machining will require lathe and milling machine work ... price is $150 + $17.10 flat rate postage in lower 48 states ... actual postage outside this...

Last post

I am uncertain regarding the question of running aluminum rod directly on the steel crankshaft rod throw ... many small engines and air compressors do exactly that ... i have re-babbitted aluminum connecting rods for Lycoming ( Auburn ) engines , so the rods can be babbitted ... regarding the wristpin end ... this is bored to wristpin diameter and...

1 Replies

398 Views

Last post by Gene_French
Wed Mar 29, 2023 10:54 am
FS DISC BRAKES

Last post by South park zephyr « Wed Mar 29, 2023 10:20 am
Posted in Classifieds - Parts
Replies: 1
by Perry Goble » Wed Mar 29, 2023 10:05 am » in Classifieds - Parts

First post

I have a set of Birdhaven wood wheel sure stop disc brakes . I bought them new 1125 .00 will sell for 850.00 I can send pictures from my phone to your phone . Perry 512 234 0243 .

Last post

I would like to see some pics
I’m interested
Scott
636-544-7750

1 Replies

208 Views

Last post by South park zephyr
Wed Mar 29, 2023 10:20 am
How Do Ya’ll Do It ?...

Last post by George House « Wed Mar 29, 2023 10:00 am
Posted in General Discussion Forum
Replies: 8
by George House » Tue Mar 28, 2023 6:31 pm » in General Discussion Forum

First post

...I’ve recently had the good fortune to acquire most of the correct ‘3 bolt’ muffler for my 1914 runabout. Thankfully, the center and middle ORIGINAL baffles are still in good shape as is the tail pipe. However I had to order the external muffler shell from one of our suppliers. Therein lies my problem: The cast iron muffler diameters are...

Last post

Good advice - all. Thanks ! I was given the correct muffler shell kit for an earlier ‘3 bolt’ muffler and truthfully didn’t know there was a difference in it and the later ‘1 bolt’ kit. So I called the “delivery boy”, Steve Lang, who delivered my parts to Chickasha. He said both of these kits are made by Snyders and there is, indeed, a difference...

8 Replies

501 Views

Last post by George House
Wed Mar 29, 2023 10:00 am

Search found 257 matches

Go to advanced search