MTFCA Forum

Couldn't locate anything using the forum search for my concerns...
Was looking for some pictures (and guidance) of other's T's showing valves properly seated and without head installed.

On the last start up, I noticed coolant bubbling out from the rear head and knew I needed to replace the head gasket.
Today I got the head removed, spent an hour...

Hey there Model T friends. This is my first post in a good while. As most of you know already, I own a 1926 TT. I have not driven my truck all that much in the past few years and that it=s due to one central reason. Almost every spoke out of the 48 on the car is loose. This looseness causes the truck to walk all over the place when I'm driving and...

I had a bit of a rude incident happen today.
I loaned my hub puller to a local T owner months ago, I explained how to use it properly.
Not a tool I use often so I didn’t mind he had it way longer than he needed it.
Much to my surprise when I requested it to be returned, he dropped it by my shop when I wasn’t there. When I unwrapped it, I found...

All,
The Bay Area Horseless Carriage Club is stepping in to take over the “Bakersfield” swap meet. The event will be the same location and date, Price per space will be 65 dollars. More information will be forthcoming soon.

This is just a quick announcement moments after the vote to let everyone know Bakersfield Lives again.

More to Follow

On the right side of the car of the rear end, is there supposed to be a drain plug on the far end of the axle housing on the underside just before where the brake housing is riveted to the housing?

Does anyone know if there’s a difference between Canadian coil boxes and US coil boxes. I have a 1922 Canadian tourer… the coil box needs rebuilt. The wood isn’t the correct thickness and when the lid is on I short out coils….

I either want to buy a rebuild kit, or maybe someone has a nice rebuilt one ready to go for me?

Thanks for your help!...

Is there an easy way to remove the battery from a 27 roadster? I'm thinking about getting a running board battery box like you see on TTs to allow easier access in the future. Pro's and cons?

20220816_115533.jpg 20220816_115553.jpg 20220816_115559.jpg 20220816_115617.jpg 20220816_115627.jpg
For sale: One piece steering wheel. Ford script and #T902 BO. needs refinshed and the joint needs reglued. $75 plus postage

It has a Rootlieb flat wood dashboard. I want to add a sheet metal cowl. more of a curved shape. Any ideas or does anyone have one for sale? or a blue print or patterns?

thnx
frontyboy.

Just respond here is the best

Here are some Old School style rope type main seals that work good on T engines. One will do a T engine. These are about 6.5” long and 1/2” square. Fits the front seal just right. Fit it in timing cover, trim it and use the rest in pan. I have a good stock of these, but when gone there will be no more. If you want any better get them while you...

I bought these years ago. They are new and never installed.
I do not have any additional hardware. $250 plus shipping.

I have two glass spare headlight reflectors. They are both the same diameter, but one is thicker and heavier than the other. Since the headlights are John Brown, I would assume the lighter one would be what was used. I'm not willing to remove the reflectors from either one of my '13s to find out!

For Sale: 14.75 outside diameter.
Cast iron spider.

$150 obo plus shipping

black T wheel.jpg

Working on getting some anti tarnish coverings made for my car and a few friends. May even make these to sell. So far we have worked out fitted headlight covers for 13 14 models (earlier models will come soon) hub cap covers and speedo covers. Pototyping of the rad and cowl lamps are progressing. All covers are made of water proof black canvas...

Removed mosquitoes.

smoked.jpg

Just finished up a new batch of Stevens Front Axle Repair inserts. Be out for a while. Sorry for taking so long, but life gets on the way. Have both Upper and Lower in stock now.
Upper Tapered inserts $6.50 each
Lower Threaded inserts $8.00 each
All are + shipping.
Email me by forum. Thanks Dan
IMG_0598.jpeg
IMG_2391.jpeg

I am going to part out my 1913 Roadster project. The body is going to be first to go. Very nice body and top irons/bows. Came from an auction in Ind years ago. $4500 pickup here or at Luray. Email me by forum. Dan
IMG_5236.jpeg
IMG_5253.jpeg
IMG_5242.jpeg
IMG_5244.jpeg

Anyone have any use for this stuff ? I'd take a reasonable offer. I also have a bunch of original Murphy fasteners !

I’m ready to put new sneakers on my ‘26 split rims and am considering going with 5.25-21. My engine is strong and I do have a Rux in this pickup. I like the idea of the slightly larger diameter tires giving me a little lower rpm at the same cruise speed. What have others experienced? Also, what’s the current opinion of the various brands that are...

We are having our 9th annual swap meet April 18th 700 A.M.

We are having our 9th annual Model T/ Model A/ prewar swap meet/ car show/ get together on April 18th 700 A. M. at our farm. Free setup and admission. Outside spaces only. Bring your Model T's, Model A's V8's all makes and models pre 1945 or just come to visit. Free primitive camping the night before. We welcome early setup. Food wagon and...

I know that I have seen one before, but I do not remember the name/maker. Any help would be appreciated.

head.jpeg

We are having our 9th annual Model T/ Model A/ prewar swap meet/ car show/ get together on Saturday April 18, 2026 at 700 A.M. at our farm. Free setup and admission. Outside spaces only. Bring your parts or cars to sell. [Model T's- Model A's or any makes pre 1945 or just come to visit. Everyone is welcome. Free primitive camping the night before....

For sale: Coil, spark plug and light bulb testor $100 plus postage

20250829_180730.jpg 20250829_180747.jpg 20250829_180853.jpg

Does this date really mean anything for a Model T or is it only because it is used on aircraft?
Why does it expire? Looks like vaseline in a tube.
Thank you.

Hi all,

I'm looking for an aluminum oil sump for a 4 dip oil pan. I need it for a speedster engine I'm in the process of building.

Thanks in advance

VIN 13605442. Excellent condition. Was running when parked 8 years ago. Stored inside. Original engine and transmission as far as I can tell. Car is located in Spring Hill, TN and has a valid title. $12,000.

I need to make a mother in law seat for my S roadster. If someone could give me dimensions, it would be greatly appreciated.

Thanks Jim

For Sale rubes horn $225 plus shipping.
Has reed and honks.

For Sale; One Brown MFG. 110 sidelamp with broken lens. Door works good.

$75 plus shipping

110 side light.jpg 110 side light 2.jpg 110 sidelight 3.jpg 110 sidelight 4.jpg

For Sale: a 1925 Indiana license plate.

$43 includes shipping to lower 48

1925 in license plate.jpg

For Sale: A complete tool kit for the F model Fordson Tractor.
These are hard to find in my neck of the woods.

$450 includes shipping.

fordson tool kit.jpg

fordson tool kit drawing.jpg

i am starting this post in possibly the wrong section BUT ... the Duncan,Ok. swapmeet is coming up in March and i am attending to sell as well as purchase some parts for my projects ... i am WANTING TO BUY ...a windshield frame for a 1931 Murry body model A 4dr., Masonic items from the 1900-1930 era , and 4 cyl. Dodge Brothers items ,particularly...

Looking for a 1914 touring in good running condition although I would consider others. I'm located in Michigan. Not interested if it's painted red. Appreciate any help locating one.

Hey all TW Timer lovers...by request I've been asked about any new runs for the TW timer. I hadn't planned to til 2027 but I reckon maybe I better. So I will take EMAIL THROUGH THE FORUM requests until Feb. 15, I strongly suggest you PLAN YEARS AHEAD.

Price from 2025 started at $19 ea. for rectangular brush, $27 for the round. You'd think it...

Three Brass tire pumps for restoration or as is, manufactured by Bridgeport Brass company. $100 each plus shipping to lower 48. Best Way to reach me is through text message. My number is 419-217-8884.

Hi, I'm looking for a Rootlieb speedster gas tank and seats. Also looking for a '24 high radiator hood.

Willing to pay for shipping to Chicago. Thank you!

More stuff - make an offer ! The Hassler springs & cups are powder coated. One of the early oil caps appears to have been nickel plated ?

Starting to thin out the collection - some duplicates & now need new homes - I've been looking at this stuff for over 40 years ! Open to reasonable offers.

My '26 speedster came with a low head. I have a high head in my stash. It looks like the high head has larger water jackets (better cooling?). What would your suggestions be on which would be best and why?

Thanks!

it is getting to be time to start planning our springtime auto. activities ... i spoke with Kevin Hammock this week regarding any changes in the Duncan swapmeet in March ... the only change is BIGGER ... the 2 north buildings are sold out and the building that was under construction last year is completed and will house an additional 100 plus...

I am curious about the touring tops. Which years typically had the flaps on the back or was an aftermarket thing.

What is the Autolite spark plug number for 1/2 thread base plugs? I have seen three numbers: F11 , #25 , and 3095.

I have a set of E&J and a set of Corcoran cowl lamps the I need brackets for. If anyone has them please let me know.

You can text me 631 466 1816

Thanks
Manny Kourounis

Dropped off a 1914 Windshield Frame along with the brass Glass Channel to mount it in. The shop calls me to inform that their Plate Glass is 3/16 thick however the Safety Glass is 1/4 thick. The option they gave is to have Plate Glass cut and then tempered however he also felt like that was against the law to use tempered in the Windshield...

Just a quick note to let folks know we have made another run of the 26/27 wire wheel lug nuts. They come in a set of twenty. You can also purchase them individually for the spare tire if you prefer. They are the same as the original lug nut to include polished cadmium plating. Although we are the source, you can also purchase them from Synder's...

Hello. I can't figure out some details about the seat assembly kit from Cubels for a 1915 Roadster. I would be grateful if some of you could help me with these questions:

1. See picture #1. Are the lower extensions of these seatback vertical posts supposed to sit on top of the seat riser cutout, as shown in the picture, or is it supposed to go...

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

I sourced this unit for a guy in India who has a 1915 T and wants to add a starter, but also wants everything period correct.
I got it from Dodge Riedy who got it to me here in Idaho a few days ago.
The bendix was completely stuck at first. After a bit of coaxing with penetrating oil, dunk tank and carb cleaner, I got the bendix working again....

This fabric item was between the front spring and the frame member on my ‘13. It appears to be long grain top material. The 1915 parts book shows an identical item, I’m wondering if anyone knows the purpose of the four small brass rivets ? IMG_3733.jpeg

Brass anti tarnish covers are now available for order! Full sets not yet available but are comming soon. Earlier model headlamps and cowl lamps are in the works. I am a one man band doing this so please be patient with me and my sewing machine we can only work so fast. All covers are hand made to order from anti tarnish cloth and water proof...

4 original parts books. Some loose covers, dirty, with some writing on them. Not reprints, but priced about the same. $45 include shipping in the CONUS.
6DD1B400-B9EE-4F5F-A46B-A14AA0BF251E_1_201_a.jpeg
23702D26-680D-43DD-B3DB-44C2E695C588_1_201_a.jpeg
C5A214BC-175D-48AA-A94B-B68BFF4B80F2_1_201_a.jpeg...

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Looking for a U & J manifold for my 26 T. Please let me know if you have anything.
Thanks.

They last longer I bet….

IMG_7249.png

My first Sprague is complete except for an original tie rod. My second one is missing the pitman arm and some other parts….Who has parts to a Sprague? IMG_7290.png IMG_7289.png

Hey, can anyone in the group share the known measurements of the Model T transmission early Brake Drum Top-Hat bearing? I see some of them given by Benson Archives parts listing pages, but would prefer to have actual measurements, even if a little worn.

Thanks,

Jim Key
Accurate Models

brake drum 5B.jpg
brake drum 4.JPG

I’m looking for a glass reflector for a e & j 656.
I have some things to trade, or cash.
I can switch to the metal reflectors but then I’d need two because I want them to match.

Hello there! Can I use red 50/50 OAT antifreeze in the 1927 model t?

For sale a Cornwell-A wrench. It is 11/16 box on one end and a socket on the other. Like new
15.5 inches long $15 plus postage

text 314-575-7115 for picture

I have 3 or each, not matching but all have nice teeth and the pinion gears look good at the taper and keyway.
$150 per R&P including shipping to USA 48
$400 for all including shipping.
Please call or text me at 33zero 3nine one nine zero 62 Dave

Does anyone still make or have a set of steering unit tapers? Venders used to supply them but have not found any. Any ideas??
answer me here its quicker.
thnx,
frontyboy

Hi, I have an early '23 and need a low radiator metal cowl. Does anyone have a nice one that they would be willing to ship to Chicago?

Thanks!

Would like to communicate with anyone knowlegable with the late Model T (and early Model A) innertube valve stems:
Schrader 777, 888, 6300
Dill VS6, VS74 , VS 74, TR 16 VS 74, and VS-74A
Trying to understand the transition from Model T (wood spoke wheel), through the late Model T (wire spoke wheel), to the early Model A.

Looking for a set of 1926-1927 Rear Radius rods. I might consider just the forged ends that going on the backing plates. Must be willing to ship to NY. Or be within a reasonable driving distance of Albany.
Please contact me at crazydart400 AT yahoo DOT Com preferably as i dont often check messages here.

Only two or three Model N were assembled by the NY auto show, with only one running for outside demonstrations. This one was hastily elevated for easy viewing. The radiator is not connected to the block. Differences from the production N included the timer located at the front of the motor (where it should be). There’s a celebrity in the crowd...

There are many events planned to commemorate the opening of Route 66 in 1926. Any clubs have plans? Here is a photo from 2012 for the worlds heaviest Model T in Tulsa. Commeration01b.jpg

IMG_5046.jpeg IMG_3004.jpeg IMG_4925.jpeg IMG_5071.jpeg

For Sale, Misc. carb parts: some new, some not. Straight thru carb. The carb has been soaked and cleaned in a ultrasonic cleaner and blown out. Installed new needle seat and valve (will come out with just a screw driver if you want to see), Installed new choke spring and flapper and new air flapper. I did not install a new carb float, needle or...

WTB: A serviceable 1926/27 Large Drum rear end for my speedster project. Something that I can put to use without major rebuild.

I’m in Austin Texas but willing to do a road trip for the right part. Thanks

What do these fit? Are they for a 1925 Fordor?
IMG_5484.jpeg

I need twelve of the 1926-27 rear curtain fasteners for the open car top irons. The current offerings (RH) fit if you don’t try to sandwich the side curtains in between.

The Model A Roadster has snaps (LH) that fasten to the windshield with smaller holes. The Model A open cars also use the same side curtain fasteners on the body as do our Model...

Can someone please provide the measurement of the front top bow from the locking pin at the bottom of the iron to the top of the wood bow? Thank you!

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

I am looking for the windshield garnish with swing arm bracket attached, for a 1923 Fordor Sedan. I believe the 1924 & 1925 models used the same garnish. There are some photos on this forum from a few years ago, showing exactly what I need. But have not yet been able to reach the gentleman that posted the photos. Any help would be greatly...

YEEEEEOOOWWW!!!

I'm trying to establish if the cam portion of my brake pedal is worn enough to warrant replacing the pedal. The pedal stroke seems to be too short, and so the band needs to be overly tightened to compensate, at least it seems that way.
The pedal supports are new reproduction parts.

Question: How much pedal free play can be considered within...

RE:

There is an interesting post in the Classifieds, and since myself, Steve, and a few others kinda hijacked John's ad, maybe it would be best to continue our discussions here.

So my next questions are; -in looking at pictures of Brad's (-and other's Boring Bar), it appears that the Engine Block's Cam bores become the 'datum' for aligning the...

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED

Enjoy Your Day!

WTB: Or (Borrow One). Camshaft rear bearing reamer bar that is put through the camshaft journals to align bore the rear bearing. Just trying to rebuild my T engine the proper way. I don't have a lathe to make one, any help would be appreciated!
Thanks, John

With which a guy can set out for a club meeting, after dark, in February, with every expectation of a successful return hours later. Mid-'60s restoration, easy start on mag, and enough patina that sloppy roads are barely an inconvenience.

My kind of T.jpeg

Hello forum. It has been a while since I posted anything but all is well and the T is still doing good. I have moved on to new projects as I need a car I can drive where the Model t can go. I had a 2014 Ram 1500 with the 5.7 hemi at 160,000 miles and it had the notorious lifter tick and low compression and misfire In cylinder 5. I started teardown...

For Sale, early 14 engine. $300. Casting date 10-29-13. Wrong pan, head, and hogshead. No visible cracks in usual places. Steve 701 212 5009

Six 30X3 1/2 rims in excellent condition, already plated and ready to go. Five of them are stamped Hayes one has no manufacturers I D but is identical to the Hayes. These were done several years ago for a proposed project that never materialized. $600.00 for the set. Four of the rims have old tires on them but if need be I'll remove the tires and...

What I have for sale is a brand new Texas T Leakless water pump. I do not have the hose. $250 plus shipping of $12.00 in the lower 48 states
Eric Smith.
815 535 1367
1958els@gmail.com

Happy New Year's to all of you model t enthusiasts in or near Utah. A few of us are getting together for lunch on Saturday Jan 3rd at 1130 am at the Red Robbin in Murray Ut. Not planning to take my speedster this time as the weather looks to be not in favor of speedsters this week.
We're just hoping to meet a few other T people, talk about cars...

I have for sale an early Hall Scott Ruckstell shift lock assembly in very good condition. $250.00 plus shipping to the lower 48. Best way to reach me is through text message, my number is 419-217-8884.

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

I have a limited supply of NOS rear spring perches. Most of them have the manhole oiler used from 1917-1923. I also have several sets with the flip top oiler used from 23-27. These were assembled and dipped in black paint, oilers, bushings and all. Why not use NOS if available?
$75.00$ a set plus 12.00$ shipping in the lower 48. Venmo or PayPal...

Does anyone have any experience with the Speedway Motors Windshield Frames for 26 Roadsters/Touring Cars? Do they match originals for look and fit?

I have the back half of a ‘26-‘27 Coupe. I am looking for a trunk lid and front cowl to try and resurrect it to a complete car.

I am in Oregon so only really looking for the parts in Washington/Oregon or far northern California.

Any help is appreciated. Easiest to reach me by email at vwfool@aol.com or by cell at 602-616-3083

Thanks

For Sale is a head unit for an unknown manufacturer engine stand. It is in very good condition. $150.00 plus shipping. Lang’s 1-800-872-7871