MTFCA Forum

I have been ask by a few people about another run of Upper Tapered Reamers and the Lower Reamer/Tap.
So I am posting here to see if there is enough interest in me making another batch.
I don’t know what price would be, but I am sure there would be a price increase. What hasn’t had one?
Only will be sold as a set unless I get more than 12...

Converted File.jpg
This was made from picture of the wrench, creating a cad file and sent to a 3D printer shop and printed out of stainless steel for ~$120 . All I know for certain is the hub cap end of the wrench fits and I have pressed pins into the spanner pin holes. I haven't a clue what the rest of the wrench is supposed to fit thus I...

Can anyone identify what Auto make may have used these?

Thanks

Rubes Horn For Sale as pictured,

has reed and honks.

$225 plus shipping.

rubes horn.jpg

This morning while checking the tire pressure I found a screw in my Blockley front tire. I guess it didn't make to the tube as the still had good air pressure and who knows how long its been in there. It renewed my faith in the Blockley tires and tubes. I bought these tires a couple years ago before all the issues with shipping. I'm going to order...

last year there were a good selection of Model T and Model T era autos and projects at the Duncan swapmeet ... will probably be a good selection of interesting cars and parts again this year ... this is the best way to see and purchase a vintage vehicle ... inperson and able to do a close ,detailed inspection and possibly drive a vehicle ... hope...

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $110 plus $19.30 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $175.00 + $19.30...

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $150...

Completely disassembled and cleaned, viton tipped needle and seat conversion, new float, choke spring, ID plate, reconditioned spray needle with nice original knob, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

If you like a deep, steam train whistle and a high pitched whistle, here it is from an old garage with neat brass parts. There are two Aermore whistles, marked No.0 and No. 00 and a Fulton cutout which can be used with either. The cutout has double butterflies and it will need to be soaked to get it loosened. The two whistles are in very good...

Does anyone here have a current contact email for John that they can send me off Forum ? Thanks !

RAJO OHV for sale. asking $4000 contact Tim PM me.
IMG_3041.jpeg IMG_3055.jpeg IMG_3056.jpeg IMG_3061.jpeg

A nice, large pair of electric headlights from about 1912 to 1915ish. These are probably too big for a Model T but? They are approximately 12 in diameter, 9 length and have 9 center to center for the mounting holes. These have convex lenses and single sockets. Brass bodies with nickel/brass rims. Very nice as found original condition. A great pair...

IMG_8587.jpeg I just got the head back the machine shop this week. The head got 8 new valves, 2 new valve guides and 6 bronze inserts. There is a serial number on the front of the head and it is 1077 X. There is freeze plug on the top of the head that has some number but are pretty hard to read
Fitz

Hey All!
I am about ready to remount the body on the frame of my 1916 Touring car. Do the splash guards just sandwich between the body and frame rails?
Thanks,
Campbell Tellman II
Beaufort, NC

For sale: new spark plug wire brackets $12 plus postage

Nice working clean rim spreader.
$60 plus shipping

Happing Motoring.

rim spreader.jpg

Out of curiosity, I bought this thing from Lang's. I would like to buy a copy of an instruction sheet, advertisement or other helpful information as to how it is installed and its operation. Many thanks. IMG_0088.jpeg

I am going to part out my 1913 Roadster project. The body is going to be first to go. Very nice body and top irons/bows. Came from an auction in Ind years ago. $4500 pickup here. It Email me by forum. Dan
IMG_5236.jpeg
IMG_5253.jpeg
IMG_5242.jpeg
IMG_5244.jpeg

Just finished up a new batch of Stevens Front Axle Repair inserts. Be out for a while. Sorry for taking so long, but life gets on the way. Have both Upper and Lower in stock now.
Upper Tapered inserts $6.50 each
Lower Threaded inserts $8.00 each
All are + shipping.
Email me by forum. Thanks Dan
IMG_0598.jpeg
IMG_2391.jpeg

Here are some Old School style rope type main seals that work good on T engines. One will do a T engine. These are about 6.5” long and 1/2” square. Fits the front seal just right. Fit it in timing cover, trim it and use the rest in pan. I have a good stock of these, but when gone there will be no more. If you want any better get them while you...

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

This Budd knock-off cap can be used on Model T or Overland depending on the emblem. At one time, the Ford emblems were reproduced. Of course, you can just remove the Overland emblem. This is a very nice cap. Good threads, latch, etc. This has not been hammered to death. Hard to find in this condition. Price is 200.00 including shipping via FedEx...

never used 16 OD rim Fits 1919 to 1925 $40 plus shipping

For Sale is an original 1914 “Rubes” all brass Horn. There are 3 dents that won’t shown when mounted. SOLD plus shipping. Lang’s 1-800-872-7871

For Sale is a set of mounted Kevlar Band Linings with metal bands. This style was available 30-40 years ago and were mounted on accessory metal bands. SOLD plus shipping. Lang’s 1-800-872-7871

WANT TO BUY

... LEFT & RIGHT REAR COMMERCIAL FENDERS TO SUIT HACK OR C-cab. ...Re-pop preferred

.....im From Australia & visiting US in May .. possible pick up ??

Looking to purchase a pair of the Fork-mounted Electric Headlights. Restored or Unrestored, any condition considered as long as the lamps are complete and restorable.

Below are examples of what I am looking for;

Thanks!!

For Sale is a neat Windshield Mount Spot Light with rear view mirror. $50.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a rare 1926 - 1927 Kingston Regenerator Carburetor. Most likely needs to be rebuilt. $200.00 plus shipping Lang’s 1-800-872-7871

For Sale is a nice 1910 - 1913 2 piece driveshaft housing, no bump spool, ball and collar. $550.00 plus shipping Lang’s 1-800-872-7871

For Sale is an older “New” set of .100 oversize Pistons with pins. $65.00 set plus shipping. Lang’s 1-800-872-7871

For Sale is a usable low head for 1913-18 T’s. One spark plug thread isn’t as good as the others. A crack is developing on the water outlet flange. $40.00 plus shipping. Lang’s 1-800-872-7871

One hundred years ago in March of 1926, My Model T coupe rolled off the assembly line. When it was 44 years old in 1970, 56 years ago I bought it for $600.00 and began restoring it when I was 16 completing it 2 years later when I was 18. I am now 72. Jim Patrick

IMG_6603.jpeg IMG_6602.jpeg IMG_1257.jpeg IMG_6606.jpeg

Hello fellow TTer’s again,
I’m now looking at moving forward with a seat replacement. Several years ago, I had a local upholster redo my one piece seat which again was not original to the truck. It works fine but is unwieldy to access the gas tank so went ahead and purchased Snyder’s repo seat spring set. In researching the old forum posts, it...

I am seeking assistance in locating a 1926 Ford Model T Coupe that holds significant historical and personal value.

The vehicle was sold in the late 1980s at the Minneapolis Armory. At the time of sale, the purchaser—believed to have resided in or near the Wisconsin Rapids area of Wisconsin—acquired several collector vehicles during the same...

Save the date. The Mother Lode Model T Club, Auburn, California will be holding their 51st annual swap meet. Sunday, May 31, 2026. Great meet to find those hard to get parts.

One more item, a period Water Pump looks to be serviceable $50 plus shipping, again contact via text or call, 3threezer02fourone2six4one. Thanks Wingnut

Hello all, up for grabs is a gently used Texas T water pump in great serviceable condition $150 plus shipping. Also a complete set of Model A wire wheel lug nuts, as you know they will fit Model T too, $30 plus shipping. I can be reached @ threethree02four12six4one, call or text, always good to hear from another T nut. Thanks Wingnut

For Sale are a pair of reproduction Sidelight Brackets for sedans or trucks. SOLD for the pair plus shipping Lang’s 1-800-872-7871

For Sale is an original 5Z-204 Ford Script Exhaust Pack Nut Wrench. $125.00 plus shipping. Lang’s 1-800-872-7871

For Sale is an original 1911-12 solid brass Steering Wheel Spider with reproduction wood rim. SOLD plus shipping. Lang’s 1-800-872-7871

For Sale is a used Spindle Arm for use with a speedometer setup 1912-16. In good condition with some pitting as seen in the photos. SOLD Lang’s 1-800-872-7871

For Sale is a Rear Wheel Puller in excellent condition, maybe NOS. $45.00 plus shipping Lang’s 1-800-872-7871

I have 3 Stromberg OF's for sale. Selling to fund additional projects.
1. Fully restored (on mounting stand) looks to have all new steel parts. Excellent Condition. $650 includes shipping lower 48.
2. Excellent condition may have been previously restored? Throttle linkage not original, I believe replacement parts are avaiable,100% clean...

Found a nice original set of early firewall brackets - I'd take $75 for the pair & split the shipping. Pikes Peak large drum brakes still available - price out repro Rocky Mtn. & see what the better deal is ! $500 + the ride now. Drop me a note through the Forum, please.

i am starting this post in possibly the wrong section BUT ... the Duncan,Ok. swapmeet is coming up in March and i am attending to sell as well as purchase some parts for my projects ... i am WANTING TO BUY ...a windshield frame for a 1931 Murry body model A 4dr., Masonic items from the 1900-1930 era , and 4 cyl. Dodge Brothers items ,particularly...

New guy here. I have a 1921 roadster I am currently putting new valves and cutting new seats in with adjustable lifters and all the hardware associated with the job. The original camshaft lobes have a lift from .225 at the lowest to .236 at the highest..230 average. Doing the job with the engine still in the car. I would go with a new .250 Stipe...

On Monday I wrecked one of my differential axle lock rings while replacing axles in my 16. I put an order in for 2 pairs of them, new axle keys and some other items I needed to replace my spare parts stash. This morning, on the 3rd day, Fed Ex delivered the parts. I'm impressed! I didn't think I could resume the project until next week. Our postal...

Want 1920s 30s pre-WW2 era camping gear or any related items. I'm in the North building. Look for the 2021 Tacoma with a rooftop tent. We camp on the spaces. We are there the whole swap meet. Anything related to Motor Camping including literature and all the little goodies ...

or send a message to the info in the photo before the swap meet. My...

it is getting to be time to start planning our springtime auto. activities ... i spoke with Kevin Hammock this week regarding any changes in the Duncan swapmeet in March ... the only change is BIGGER ... the 2 north buildings are sold out and the building that was under construction last year is completed and will house an additional 100 plus...

I know I am way off topic but there is a lot of knowledge on here,
Anyone know anything about wound vac systems or had experience with them?
Wife is getting one tomorrow and I am at a lose about it. Thanks Dan

I'm rebuilding the wheels on my 1913 touring due to loose spokes and felloes, as well as large cracks, etc. This caused me to wonder about the color of the wheels and the rims. Are the wheels the same as body color? Were the rims cadmium plated or galv, or were they also originally wheel or body color? I don't find anything about this in Bruce's...

I'm looking for the secret to remove the steering wheel lock from the column. It was made by the BATTLE LOCK COMPANY and of course the key is long gone. I cannot see any pins that could be keeping the lock in place. Some paint does remain that could be hiding a pin. If anyone has any knowledge on how to separate mechanism from the column please...

I have a great start on a 1914 WW1 Ambulance Body and Chassis, 85 % finished but all materials are there to finish this neat
piece of U S History. Located in Ct 06013 25 miles from Hartford. I can Deliver within a 100 mile radius for fuel. Asking $4,500 Email for pictures and send Contact# to discuss the project. You will not be disappointed with...

I have 3 - nice 26-7 coilboxes with covers, $115 plus shipping, 26-7 engine blocks $350 plus shipping, 26-7 rear axle housings
$100 plus shipping, 2-3 High radiators $150 each plus shipping. 26-7 frames excellant condition $350 each. All items can be picked up in Ct 06013. Email needs with contact# I will call you back to discuss all items and...

We are having our 9th annual swap meet April 18th 700 A.M.

This was in the bottom of a random-box-of-awesomeness from the recent Cipriano Estate auction, and I am looking for some help to ID them. There are 2 pieces/brackets exactly the same, cast brass, with the 2 steel studs and castellated nuts. Any help or ideas are always appreciated.

IMG_7347.JPG
IMG_7348.JPG

I have some body plans and templates for model F Ford, free to a good home, just pay postage. Kdmks At att.net.

Model T 1926/27 Walker stamped ratchet style jack T2343. This jack works as it should. These are not listed often and are hard to find. $125 and $23 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

For sale is three running board luggage racks. One short one and two tall ones. All three work as they should. The brackets on the two taller ones are just a little bit different. $60 for the short one, $80 each for the other two, plus shipping to the lower 48 for all three.The running board is NOT included. Best way to reach me is either a text...

A brand-new Nickel radiator cap. These are not in stock at the venders. $25 and $10 shipping. Email me at markpaulagember AT aol DOT com

IMG_5249.jpeg IMG_5229.jpeg IMG_5259.jpeg IMG_5230.jpeg

6 fluted original steel oil cap. Plain top. (1915-16) $25 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. NOW $100 and $15 shipping. Email me at markpaulagember AT aol dot com

I just purchased a chassis from a 27 T. It has an odd logo stamped into the frame. Wonder if anyone can tell me what it is. It looks like a company logo. I’ve enclosed a picture of it. Thanks. Ray

Here in St. Louis, The Model T Club of Greater St. Louis, is having our annual swap meet May 3rd.
I don’t know how many years this has gone on for us, but I attended many times before joining the club, going back well over 25 years ago.
We have been at this location for a few years now.
Last year highway construction impacted our turnout, but as...

A pair of Bale handles for the center door T's
$150 plus shipping.
Thanks!

IMG_4715.jpg
IMG_4714.jpg

mikebird@lifeattheridge.net

For sale are Top bow socket arms for a 1911-12 roadster and torpedo. They are Brass and the threads are in excellent condition. $100 plus shipping to lower 48. Best way to reach me is through text message, my number is 419-217-8884.

Very nice period accessory engine oil pan brace. Also known as a “belly band”. Works great to take some load off of your pan ears. Has very nice hooks that attach to the frame rails on both sides.

$75 plus shipping in the U.S.

IMG_9167.jpeg

IMG_9168.jpeg

IMG_9170.jpeg

IMG_9171.jpeg

On a 13 runabout with blue wheels what color is the rear brake drum? Where they painted blue with the wheels or black like the chassis? Art

I want to buy two pair of accessory taillight brackets that attach to the top saddle arms of any Touring car or roadster
and allows you to use the electric tail lamps. Please contact me here.
Eric Gould
Monroeville, AL

Everything in the first picture. Block with heavy valve doors, and timing gear cover; fan w/brass hub; seven rivet teacup pan; hogshead with pedals and Ford script inspection cover; complete transmission assembly. The block, going by the serial #97901 was assembled in March of '12. The casting date is not really legible. There are no cracks in the...

Stromberg LF for sale. Complete carburetor. Nothing frozen up on it. No wear on the throttle shaft. Asking $200. I know the OF and RF are great carburetors. I don't know about the LF. If interested, please contact me through the forum email system. Thank you.
Bryan Ostergren
Stromberg 1.jpeg
Stromberg.jpeg
Stromberg 3.jpeg
Stromberg 4.jpeg

This carburetor is complete. The barrel throttle works freely with no slop. 1 1/8 throat. Asking $400. like the subject line says, I'm flexible on the price. You can contact me through the forum email system. Thanks.
Bryan Ostergren
Winfield 1.jpeg
Winfield 2.jpeg
Winfield 3.jpeg
Winfield 4.jpeg
Winfield 5.jpeg

Here is a photo of an original NRS radiator tank on top and a new Brassworks radiator on bottom. As you can see the new radiator seam around the edge has a lip. The original has no seam and is flush with the surface. Did they manufacture radiators with the lip originally? Were they made both ways back in the day?
IMG_2488.jpeg

Brass anti tarnish covers are now available for order! Full sets not yet available but are comming soon. Earlier model headlamps and cowl lamps are in the works. I am a one man band doing this so please be patient with me and my sewing machine we can only work so fast. All covers are hand made to order from anti tarnish cloth and water proof...

The commutator roller on my SR is held on with a cotter pin. What is the size of the nut on the camshaft to secure it?. Is it a left hand thread?

thanks

Wood is solid also…$100 including shipping to the 48 states
33zero 3nine one nine zero 62 is the best contact for me, thanks Dave

20251208_214755.jpg
For Sale: Cal-Van #548 puller $25 plus postage

Is anyone familiar with someone who may have reproduced the strike plates for the 1910 locking door latch?
Thank you!

WTB: 1910 T door latch strike plate.
Thank you.

I'm looking for one front fender support bracket. Prefer original unadulterated one. Picture is for reference. Contact me through the forum email. Let me know what is available. Thanks Jack. Ÿ

Anyone here know what the rings look like that hold in the glass in on the door of a Rushmore search light looks like. Also how is the mirror in the back of the light held in? Pictures would be very helpful. Thanks!

Here's a full set of Hassler shocks. Springs have been powder coated as well as a front set of spring holders & a pair of later style rear holders - I'll include the earlier rear cast holders - no charge. Rear arms have new Ford sized bushings installed. $250.00 for all the pieces - the trip will be extra !

Bosch Distributor for sale. This came with a bunch of T parts I just bought and I’ve never run a distributor on my T’s so I don’t know much about it.

The shaft turns, the cap has a couple little chunks missing but should still work. The rotor looks good. It looks like the body of the distributor has had some damage in the past and look to have...

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

Is this the early T screwdriver?

Hi all,

I am looking for a way and parts to rebuild the speedo meter inner cable.
The original cable is build up with shackles.
Can I buy somewhere a new inner cable or is there a way to rebuild the broken shackle? In the MTFCA speedometer book.

Thaks
Andre
Belgium