MTFCA Forum

Desirable early Winfield Model 4V carburetor. Aluminum not pot metal like the later Model M. Minor repair / material removed on front intake which does not effect operation. Barrell is nice and snug. Was sandblasted for inspection. Will need to be cleaned and rebuilt prior to use. Price is $325 with free domestic shipping included. Mark Chaffin...

3/21, Lowered Price & FREE SHIPPING. See the pictures. I think there is supposed to be a seal on the inside of the bearing that is missing. My idea was to order the exact same ball bearing and just change the bearing OR swap the seal over. I’ll leave that to the new owner to keep the price down. The machined tail shaft is a real nice fit in the...

91E86910-7E74-451D-A8EE-3DA9499FEE60.jpeg
.
3BA05F00-EF65-42B3-A98C-62729C1662DE.jpeg
My rebuild process is described in gory detail on my new website:

Forum Member Pricing:
1919-1927 Ford Model T Starter/GeneratorExchange prices (2022)
Rebuilt Generator: $325 (new field coils, reconditioned armature)
New Generator: $450 (new field coils,...

I finally found top sockets for my 24 roadster. My new crisis is that I ordered top saddle support arms

The reproduced arms have an 11/16 fine thread. They would not screw in and when I looked into it, the area where mine screw into are either 1/2 or 5/8 coarse. (I dont remember which)

ANYWAY. Does anyone have information on the thread...

Didn’t quite expect to see this Leg at Chickasha, especially at 50 ft tall, but here it is. You can see the south building in the background and you can also see the Leg from the fairgrounds.

I need Information on a 30 April 1920 Shebler Updraft Patent, as to what carburetor was designed to go with it and if it is worth trying to install and operate. Jim Golden, Bowie, aryland

Seeing Bushmikes post of his TT and the Hi-Lo got me thinking again. We were in Richmond at the museum today, there's probably info in the library but we were there late and didn't have time to look through anything, so, anyone on here that can tell me about this? I picked up the truck last fall and to be honest we have done very little to it this...

If this post is not in compliance with the MTFCA / Forum I will delete my post & ask Chris to delete the thread.

In an effort to help with ideas on how we can make Chickasha pre-war swap meet a must go to event, what would you do.
I encourage your constructive input, try not to just be negative. Sure you have to talk about a problem but have a...

I am looking for a set of sidelamp brackets for the TT truck.

WTB: Stevens Sea Lion and Arbors

A fellow T Ford hobbiest recently purchased this Stevens Conrod Alignment Fixture. However it is missing the sea lion and arbours.

Does anyone by chance have a sea lion, arbours or both spare?

Thanks Simon

I want to use original radiator springs for my 1927 coupe, but I can't find two of mine. Do any of you have some that I could purchase?

I will put this request in the classified section aso.

Today, I was going to throw in the trash, 5 old, cracked metal and 5 old cracked rubber stemmed 21 tubes. I, also, have 2 tubes that are not cracked and are still holding air. I have no idea how old the lot is, but I suspect even the newest are 60 years old or more. I went ahead and cut the metal valve stems from their tubes, These were original...

Forum Chums
I hope you all are having a great day! As many of you know, there are no new cam shafts to be had a present…. I’ve got two camshafts on back order right now ……a standard stock and a 270…. My primary objective is to have the most low end torque that I can have, because I’ve got a lot of hills to climb in the area of Pennsylvania where I...

One set of cast steel main bearing caps for oversize crankshaft installation. Machine to suit your application. Price is $100 with free domestic shipping. Mark Chaffin (951) 805-0928

Caps 1.jpg

Caps 2.jpg

Caps 3.jpg

Original New Day Timer used condition. Price is $45.00 with free domestic shipping. Mark Cahffin (951) 805-0928

New Day 1.jpg

Newday 2.jpg

Assortment of NOS parts as described below. Free domestic shipping included. Mark Chaffin (951) 805-0928

NOS 1.jpg
One clutch shaft NOS $35.00
Several 26/27 brake cam arms NOS. $40.00 per set (2). No longer available

NOS 2.jpg
Driveshaft ball end NOS $40.00

#2696B (Right). That's the one with a hole for mounting a speedometer swivel.

I saw a 1958 Rambler sedan on the road today. Red and black, fancy trim level, looked like a totally stock original with slightly oxidized paint.

Want to buy a Magneto Gauge Tool - KRW reproduction. If you aren’t selling one, will you rent one to me?

for sale: very good condition gas tank with end outlet $200 plus shipping

20220616_111019.jpg 20220616_111257.jpg

Replaced housing caps with the Snyders outer grease seals. The key doesn’t fit all the way into the keyway length wise. Solutions please.

Greetings All!! Get ready for a wonderful and rewarding Tulare Swap Meet at the Tulare County Fair Grounds on April 14-15 2023. Move-in day is April 13 from 9:00am to 6:00pm. This year we have a new and, (hopefully), permanent venue. After two years at the Agri-Center, we moved to the Fair Grounds. This will be a Pre-War ONLY event this year, much...

I'm posting this for a friend that doesn't have internet access.

PM me for his contact info. Include your email address in the PM

Parts must be picked up near Lanesville Indiana

Use this link for photos:

$1200 for the following 1909-1912 parts:
Early Frame 1909-1913
Right splash apron 1911
Pair rear fenders and butterfly mounts 1909/10...

Here are a few pics I took while at Chickasha and also some of my finds. My two favorite finds are the speedster body and the Wakasha intake ... The speedster body may be the next speedster project. Anyone interested in another 6-year long project :) thats how long it took to do the last one I did on the forum. The pics of the tools are tools that...

I have 3 complete non starter transmissions for sale. These are extra to me. $150 EACH. Pickup here or I can bring to Luray. Here pictures of 2 the other I have not gotten out yet. Email me at address in pictures. Thanks Dan
8AB8269E-C93D-4E4B-BC40-A766F4DDEF45.jpeg
EC78FA81-AC28-4EC4-8D28-6DD205F4C7F7.jpeg...

Very nice ready to bolt on 4 ball Kingston carb. 300$ plus shipping.

Call / Text or Message me thru the site.

248---- 495----3974.......

Thanks,
Mark

Here is my last long hub 26/27 fan hub. These were for the 3 row radiator. Has beef mounted and used but doesn’t look like for very long. $25 + shipping. Email me at address in pictures. Thanks Dan.
CFD52C9C-0A7D-4738-B173-F3B19ED7E0BB.jpeg
E5750728-8A76-4C2B-8488-011B90349236.jpeg
990CE7A9-EDD0-4946-B2CF-ACD4C49D664B.jpeg...

Here is an early fan hub and arm for sale. What you see is what you get. Turns but hub has some wear In belt area.
$10 + shipping. Email me at address in pictures. Thanks Dan
B2D12FBF-8704-4A37-86A9-6BCFC3D36491.jpeg
9C29663A-EB78-4ACA-B479-BEDE24EE7208.jpeg
13B0AF68-CCD8-4EE7-922B-283594E22A96.jpeg

These are the pictures I took before I left. Looking forward to going again in 2024.

One brass Aermore exhaust whistle $100 with free domestic shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

One new Bosch front plate drive shaft new (BPS-1). Retail price is $39.95. Get this one for $35.00 with free domestic shipping. Mark Chaffin (951) 805-0928

BPS-1.jpg

Hydraulic brake setup / booster. Rebuilt by a Model T enthusiast for use in his modified Model T. Price is $125 with free domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

Late last Monday night, a little past midnight, I ordered two new front tyres (30 x 3) through the Blockley website. Later that morning (Tuesday) my card was charged. The amount was about $25 more than the cost of tyres (£298) plus shipping (£116). I assume that was Paypal's cut. On Wednesday at 8:26 AM British time the tyres were shipped. They...

The swivel for the Stewart 100 speedometer on my 1915 runabout is attached to the spindle arm by a clamp. Even with the nuts tightened to almost before it breaks , the clamp wants to wander and disengage the gears. So I'm wondering about installing a 2696B spindle arm, That's the one with a hole for mounting a swivel. But I wonder about the fit....

Still have Ford script keys. I have sold out of 55 and 63.
$8 shipped to lower 48.

Please pm

I am up dating my AC coil tester (pictures to follow). During the work on the much looked down on buzz box tester, I wondered just how many other cars from 1907 to 1927 used the tremble coil for ignition?

And before the HCCT was introduced, just how did the coils get to be adjusted, not for ultimate performance, but to work and do the job of...

Aluminum Manocchi reproduction Bosch front plate with cam gear and nut. In excellent condition. Price is $200 with free domestic shipping. Mark Chaffin (951) 805-0928

Bosch 1.jpg

Bosch 2.jpg

Sale completed

Does anyone know where I could find depot hack body plans? I’m hoping to do a wooden body on a TT frame and could use reference material.

I need to buy two original radiator springs for my 1927 coupe.

Hi, my friend is looking for chrome front and back bumpers in good condition with hardware for his 1926:Ford Sedan. Any help will be appreciated.

My camera suffered a grievous accident and was stuck together with Gorillla tape, but I managed to get a few shots.

IMG_0236 copy.JPG
High art in the park.

pano1.jpg
1912 Rock Island station. The first time I saw it, about 1986, was before restoration, and it still had a WHITE WAITING ROOM sign on one of the doors.

IMG_0249.JPG...

39 cleats 30 link plates and bucket of links
All for $500
Nvbob
Jalopyt@yahoo.com

So I went to Chickasha this year for the first time and gotta say even though I could only make it early on friday, it was a really fun experience. I ended up purchasing a Moore Auxilury trans from a couple of guys and need some info one it. I have already found the few forum posts on it I could but I seem to have a mid mount model intended for a...

If anyone wants to trade, have 3 rears. Can deliver in Arizona or SoCal. Thanks!

1922 Touring for sale. Titled as a 1922 based on engine number, but it has a one-man top so I believe the car dates to late 1922 as model years changed.

The car is in great shape but hasn't run for several years. Stored in a closed garage. I installed floating hubs from Birdhaven along with new driveshaft and new axles when I rebuilt the rear end...

Very nice front and rear brackets for your 23-25 Roadsters. $350 shipped
IMG_0188.JPG

Condor Brass Bulb Horn Works fine when blown into. Takes a standard horn bulb sold by Model T parts vendors. Will polish up nicely. Asking $65 plus postage. Condor horn 2 (1).jpg Condor horn 2 (2).jpg Condor horn 3.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks.
email.jpg

I promised Jim Mahaffey I wouldn't post these until after his articles on Model T Ford Snubbers for 1926-1927 close cars finished its run in Model T Times (MTFCI semi annual publication), the last issue of that was supposed to hit about January (I think), so I thought I'd go ahead and post these here.

These are a little known item that the Ford...

Spoken for thanks mtfca
Lot of 4
one is marked Ford and one double barrel in brass
One I think is model A Ford
All need new leathers
Asking $60 for the lot+ postage
Nvbob
Jalopyt@yahoo.com

A few more pictures from Chickasha 2023

1915 Model T Ford. The 1915 Model T Ford was manufactured and sold in the late 1915. There were 989 built that were all aluminum rear body panel. In mid 1915 Ford changed to a steel body but the body style didn't change through 1916. This is the all steel body which is the 1916 and the last year of the brass radiator and headlights. There were...

Sold
Cross country spark plugs
1/2 pipe plugs
Asking $40 to your door in lower 48 elsewhere be calculated beyond that
Nvbob
Jalopyt@yahoo.com

Hello guys,

I got some parts I'd like to move on. Got the usual hoarding parts, axle housings, high heads, later blocks. Also have a decent pair of 26-27 front fenders and one rear. Have a single DB front axle I'd let out of the hoard too. I prefer local pickup in Lake Stevens, WA. I can get pictures and get shipping quotes if there's something...

The radiator on my Touring has never fit right, I had thought it was the frame, it was bent and welded, I bought a new frame and brought it to frame shop and had them make sure it was correct per the frame drawing I have. Now that I putting it together with the new frame I am having the same problems, It's as if my radiator is to high, I can pull...

for sale: found another pitman arm. $30 plus postage

We are having our 6th annual Model T- Model A- prewar swap meet and car show at our farm Saturday, April 22, 2023 starting at 7AM. Free overnight primitive camping. Free setup, free admission. Rest room and lunch wagon on site. Location is 7525 County 12 Blvd, Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell, swap or look. Questions, Bob &...

We are having our 6th annual Model T- Model A - prewar swap meet and car show at our farm Saturday April 22, 2023 stating at 7AM. Free overnight primitive camping. Free setup, free admission. Restroom and lunch wagon on site. Location is 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell or look. Questions, call 507 458...

17 non Ford teens steering wheel
Nice for a speedster
3/4 straight keyed center
Asking 125 + post or bo
NvBob
Jalopyt@yahoo.com

The fellow that makes these is still alive and kickin’.
74D1CB4B-AD17-4D5B-B0C9-A627CCCF1395.jpeg

Here is a main bearing mold extra to my shop. Made by Universal Tool Co, Detroit MI. Pours all three without moving mold. Has plugs do the oil holes, see pictures. $150 delivered to Luray or maybe Hershey. Cleaning out extras in my shop, time to downsize. Email me at address in pictures. No PMs, they don’t work. Thanks Dan...

E461992A-FF69-4A11-A312-AF39D4D62B36.jpeg AAE4A50F-6D86-446F-A624-010722ACF1B1.jpeg 02023BF9-AECB-4DD9-B709-C757A94C9A83.jpeg 933D7E3E-1017-4AE2-8F16-DCAA8265E449.jpeg

Sold pending payment
26/7 spindles in great shape ready for your bushings
And paint asking $135 to your door in 48 states
Nvbob
Jalopyt@yahoo.com

Whis is making the finger joint box for a repop KW Coil?
Thank you
Jon Crane
cranejon@hotmail.com

I have an old T trailer that I am trying to get on the road and am looking for some rusty ugly but usable bits to finish it. It is definitely in a heavily antiqued state that I kind of like so the anything else that I put on it needs to match. All I am needing is bolts and nuts for mounting the rims (8 total) a single hubcap and one useable but...

If you are interested in selling a Model T Ford Magneto Gap Gauge Tool - KRW Reproduction… please message me.

For Info on Moore transmissions see the link below (but note that the shifter on mine is of a different design):

Moore was possibly the 3rd most popular aux. trans after Ruckstell and Warford. Advantage over Ruckstell is that the Moore has a neutral (so you can have the T towed a long distance without fear) plus if you have an early rear end...

For Sale: Solid 17 Dill Lockable Steering Wheel C/W Key. $395.00 US$ - Black could use some TLC (paint wise.) Shipping from Canada, Price includes first $60.00 shipping. More photos available if needed.

Our local club supports a car show in Pocatello that helps support ISU's Automotive program. We also sustain a couple scholarships there.
Joy manages a club booth, so we are obligated to go. I always admire the chrome and creative efforts of all who show cars but find two days of the show a bit tedious except for seeing old friends there. This...

for sale: Ford script head. very good condition $100 plus postage

20220721_124851.jpg[/attachment 20220721_124955.jpg

Here is 26/27 fan hub assy. Has Ford shaft, was in some stuff. $15 + shipping. Email me at address in pictures. Thanks Dan
8B4282C4-0FC9-4411-A725-BD146012DC1F.jpeg
714C2B46-42F1-4592-9CBC-4F9BE6FFC0DB.jpeg
704B1DDA-8C73-4DD7-976A-01B9F6A69EEB.jpeg

There is enough parts here for one setup plus three other extra pump plates. the plain glass tube on the sump site gauge will need to be replaced. Original instructions are photo copies. Asking $120 plus postage.
Strong 1.jpg Strong 2.jpg Strong 3.jpg Strong 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!...

Looking for an ammeter, I'll buy the whole ignition switch if needed.

Last year in Luray a Guy bought side curtains from me. I was informed that he put them on form for sale ,He said they didn't fit .
I'll gladly refund your money ,I'll be there ,in same spot this year.
Rich 561 262 0393

It will soon be MAY, and that means LURAY!!
Yep, we are now LESS than EIGHT WEEKS away, from the 9th Annual Mid-Atlantic Pre-War Swap Meet!!

BUT REMEMBER, There’s MORE!!!

The MTFCI has joined ranks with the Shenandoah Valley Racket “T”ers to bring you THREE FULL DAYS OF TOURING immediately following our regularly scheduled two-day swap meet!...

How come no one posted any pictures from Chickasha? Was no one there? Guess it didn’t happen if there are no pictures. Show us what you guys found.

Just some pictures from Chickasha 2023

Looking to have a Model T transported from WV to MA. Flexible on timing, experience hauling T s required along with references. Please PM me with contact info.

for sale: upper water outlet and pulley $100 plus postage

email melbanolan@aol.com or text 314-575-7115 for pictures

Free: I found still more more old hardware I don't think I'll ever need, this time it's 10-24 x 3/8 truss head slotted screws. I have approx 4. lbs of these, and they should all fit in one USPS Small Flat Rate Box. You pay shipping and they're yours. Sorry if this is off-topic, but no one besides Model T Guys show much interest in this.

Also, I...

These are early ball bearings for the real early model t

Brass rear end suction pump. Nice period correct tool for use or display. Polished with new leathers, works great. $75 + shipping. IMG_2503.jpg
email or call sixo2-7six9-0two57
Craig. IMG_2504.jpg

SOLD to SCOTT!

This is a nice, original Boyce Universal Model Moto Meter. This is a larger version that is 3 in diameter and 5 tall. The moto meter is in excellent condition and has a machined, steel cap. The moto meter has brass trim and beveled glass. A great piece.

The price is 125.00 including shipping/insurance via FedEx Ground in the USA....

I have a complete 1914 engine. It came out of long time dry storage.
.060 aluminum pistons. Very clean. Usable as is, but should be gone through.
Can be picked up in Luray or Richmond if prearranged.
Rich
561-262-0393

I never know if I’m going or not until the last minute but I’m here this year. I’ve got the following carburetors if anyone is interested.
1- 1912 Holley H1, viton tipped needle and brass float $550
2- 1914 Holley Pats Pending $325 each
2- cast iron Holley G, one single choke arm, one double $200 each
1 brass Kingston L4. $150
2 brass Holley G...

Light Muncie - Gears look good with normal wear. Everything spins nice. Under-Direct-Over-Reverse. Roughly 1.78:1 U, 1:1 D, and 0.73:1 O. Were used in Ts and TTs. I don't have the couplers. $425

Heavy Case Muncie (painted one) - Gears look very, very good with exception of underdrive gear on lower shaft, which has 4-5 teeth in a row damaged....

SOLD to Rich!

Here are two pre-Model T books. These are EARLY REPRODUCTION books done by Polyprints in the 1950s. Both are in good condition. The Price List of Parts and Instruction Book is about 50 pages and the Model R is about 20 pages.

The price is 55.00 for both and includes shipping within the USA.

Please call me at 734-730-4274 or email:...