MTFCA Forum

Just curious, I have been trying to send personal messages and emails using the functions on this site. Nothing seems to go through. I have two messages in my outbox but don't see a way to move them along. I thought once you hit submit on an email or PM, away it would go. What am I doing wrong?

Here is an original Splitdorf Ford Special magneto. It was made especially for the Model T Ford in 1914 or so. It was designed to be paired with a Splitdorf front plate magneto drive or coupled with similar front plate units. It is counter clockwise CCW rotation. It is in clean condition, but will need to be rebuilt and the small spring loaded...

Hey everyone, I recently got a TT roller with the Lincoln Transmission on it. I was wondering if anyone knew anything about these? I dont see them often. Are they hard to find? Any help would be great! Thanks!

Is anyone running an original Stewart tachometer?
If so where are you driving it from?
Are they a 1 to 1 drive?
I was considering driving mine from the fan belt with a pulley
the same diameter as the crank pulley. It would be positioned about
where a a water pomp pulley would be located.
I need to look at some old water pumps to see if they...

LED Light lamp to replace carbide headlight? I would like to install LED lamp in a carbide headlight. Where can I find bright ones?

Here is a picture from Lang to show what I want. These sold by Lang are too dim according to their description. Looking for something brighter.

I decided that I wanted to give LED lights a try. I purchased 5-30 volts non-polarized bulbs. When they arrived I installed the first bulb and it light up nicely, but when I installed both neither worked. I tried again with one LED and one incandescent and it worked. One incandescent alone also works...

So then to eliminate any type of...

Wanted 1913-14 rear end halves in good usable condition. Need 1 or a pair.
Craig E. Luton, craigandjoan@gmail.com

Thank you to Jarrod Williams for this video. I have not seen it before.

Any fellow T members near Templeton California that could take a look at a T for me? Your help would be greatly appreciated. Pat

Anyone in the U.P. or Northern Wisconsin have a nice later Model T front axle?

I took the 1911 out for about a ten mile drive yesterday. The temperature here was in the high fifties and the roads were nice and dry. The Model T has been stored in my enclosed trailer all winter. It was so happy to be out it has given me four free starts in a row. I primed it by pulling the choke out with 3 quarter turns of the crank, turned...

Did the T's and TT's use chicken wire in their roofs ???
Thanks , Don

I’ll be putting my ‘11 up for sale in a couple of months, probably late March or early April; I’m just posting now as a heads up. It’s a great car, more accurate and complete than most, and a strong runner. I need some time to get it out for more pictures, that’s the main reason for the delay. Feel free to email if your interested. I’m not looking...

1915 Model T Touring car, possibly a rare “wide track” model originally sold in the Southern States. Car has a slightly wider wheelbase (~4 inches), which was originally designed for following cotton wagon ruts in the road. Uncommon, period correct suspension damper setup.

Engine and transmission were rebuilt (aluminum pistons, .270 cam, lifter,...

My 1911 Torpedo needs new conn rod bearings, should I go with Inserts rather than conventional Babbitt?
Thanks,

Dodge bros. Spider. 15 o.d. wheel. 200.00 plus shipping IMG_20220722_085541746.jpg IMG_20220722_085527453.jpg IMG_20220722_085515377.jpg

Overall good condition. Has a dent in the top and one on the corner. Thumb wheel spins as should. Glass is good. 70.00 plus shipping. ctleonard64@gmail.com IMG_20230117_082543375.jpg IMG_20230117_082554536.jpg IMG_20230117_082607602.jpg IMG_20230117_082616228.jpg

i have a set of floating hubs for sale. they include all of the bolts not pictured and an instruction sheet.
the vendors get about 630.00 i will take 500.00 for the set with all of the bolts. philip
336 212 6927
i will take 450.00 for the hubs material and hardware is over 200.00 and many hours of work.

Last spring when I started working on my T the first thing I did was to remove the top because of rotted out tack rail & front bow. Now I am wanting to put same top back on as it is in good shape yet & I don’t see any reason to replace it. Has anyone done this before, & if you have, I would appreciate any thoughts of it can be done with good...

WTB Oil can with bracket for my ‘24 Touring.

Got this trans in a T parts pickup. I'm thinking it was with this T stuff because they we're looking to adapt it to a T somehow.
Any guesses out there?

Was the magneto coil wrap cotton or linen? Has anyone tried wrapping their windings with 100% lite weight cotton twill?
Comes in 1/2 too.

Hello all. This is my first post to the forum. Last week I finally pulled the trigger and bought my first T. A 1926 Tudor.
LOTS to learn but I am enjoying every second of it. I am trying to identify the shade of green the car is painted in but am having some difficulty in getting an exact match. I have.seen others painted this color but no one...

Could someone send me or post the original instructions for a Fun Projects 6V regulator? Thanks!

Nice Buttler brass water pump, stainless steel shaft. $200. Original Battery box cover with door, very nice, $125. Tool for lifting transmission on and off engine, well made and very useful, $85. Ford oil can with original spring loaded mount, $85.00. All plus shipping. kdmks AT att.net.

While this question does pertain to model t parts, I am really trying to figure out what I should expect from my lathe. I was going to try and chuck a model t transmission shaft up and true the flange like Mike Bender did in the model t tips video. I figured I would first indicate it in, and if that worked out, then I would buy a steady rest and...

Current status: Shifter broke where someone had previously welded the casting down where it attaches to the transmission. Easy enough fix, just need to order a new shifter.

In the meantime, the axle is in low and we've been graced with a few sunny days following more arctic-like weather. I'd like to drive the car and not be in low axle gear all...

I've been looking, without success, for the compression boost from the domed pistons offered by the vendors. From stock 4 to 1 to ???

Anyone know or have a feel for it?
Walt

I am looking for two differential axle gears (the ones pressed onto the axles) in very good condition for use in my 1915 Touring car. I have purchased new axles, but my existing gears are quite pitted, and I understand that reproductions are not available.

After nearly a year's worth of effort, I have just recently gotten my car back on the road...

Dan, all I get is “all circuits are busy when trying to call you or text you. Call me 423.237.8846 or 423.623.5656
Package is ready.
Thanks Larry

Pair of NOS Rear Genuine FORD made Shackles.
No Nuts or bars.

$140

Contact for photos.

314-287-1901

stephensmail2001@gmail.com

Set of three FORD Triple gears. Guaranteed NOS. $300
Single FORD NOS driven Gear $75

Contact for photos.

314-287-1901

stephensmail2001@gmail.com

WTB Oil can with bracket for my ‘24 Touring.
Harvey Bergstrom

Thanks to Richard on hear I now have a set of Rocky Mountain Brakes that will be going on a 24 Coupe that Tim helped me find. A big thank you to both gentlemen!!! That said does anyone have some photos and or tips that would help with installing the RM Brakes? It seams straight forward but I hope to learn from the many years of experience everyone...

These are the 11-14 style. They appear to be old high quality repo's.They are a lot better than the last batch all the dealers had that needed to be fitted. $85.00 plus $17.10 shipping in the cont. US. Ted. 503-728-3476

Speedo wheel gear and plate $100.00
8 hood pins (4 with springs). $20.00
Original ammeter (black ring). $38.00
Beautiful dome light cover. $12.00
Original Carb pipe $10.00
New 5031 complete wire harness ( 1915-1922). $15.00
New 7853C chrome rear view mirror $35.00
All items plus postage
Call/text/email
Cell: 423.237.8846
Email: ltlapatka@gmail.com

My 22 came with Rocky Mountain brakes but without the sliding adjuster. I bought one but it didn’t come with instructions and the ones in the Rocky Mountain website are not very clear. Does anyone have a picture and advice on how it goes in?

FS Hempy Cooper Mfg. Co. main bearing Babbiting Jig in the original wood shipping crate. Likely incomplete, what you see in the photos is what is included. Made in Kansas City, MO. $325.00 email gregps@msn.com Cell 612 940 5972 Greg

Can anyone identify the wire wheels pictured below? I can find no identifying marks of any kind. I appreciate your assistance! Thanks, Mike wheel2.jpg wheel1.jpg jones5.jpg

FS New Old Stock Genuine Ford 1917 to 1923 right front fender. Has areas of surface rust $275.00 gregps@msn.com Cell 612 940 5972

I have a 10 tooth pinion that is marked 10-42, will that work on a 40 tooth ring gear? It looks just slightly different. Thanks for any help that I can get. Dennis

FS 1926, 1927 Genuine Ford accessory front and rear bumpers in excellent original condition $500.00 for all plus shipping email gregps@msn Cell 612 940 5972 Greg

For Sale: 10 tooth pinion gear . great condition, marked Ford . May be NOS. $140., includes shipping in US only. call (248) 894-75fiveone. Thanks, Walt

I have a source for which to acquire the round brush for the TW timer. Naturally the larger the quantity the lower the price. Example...12 would be around $26 ea. but if I can scarf up an order for 24 it is down to a bit under $18, plus tax and shipping. Passing cost on directly. I'm not in the parts business. I just want to keep what I feel is...

I'm wanting to buy a rim spreader for a 1922 Stanley 7 passenger touring. Not my car but wanted to give it to him as a gift. Would any of the ones out there work or does it have to be bigger than what we use on a Model T.

Like the Doc said, You got it again son!

My problem is with a 1920 engine.

The two different sized crankshaft pulleys are listed for 1920, one at the end and one at the beginning of years they fit.

I used the larger size pulley that should make the fan turn slightly faster!!

I'm wondering if a Gates 820 flat black belt was intended for use on...

hi there looking wanted new Exhaust muffler 1910 ford model t anybody out there willing t part with it if you have one . i have looked in the parts suppliers but there out of stock

Hi All,

I have just stripped down the axle on my 1916 tourer. I notice that the half shafts with the half shaft gears attached rock up and down against the spider gears. I'm assuming this shouldn't happen - any idea of possible cause?

Many Thanks
George Hounslow

Want to buy NOS or good used authentic upholstery nails. I'll buy a box if they correct. These may have been used up until the one man tops?

Moved to correct forum

Hey as some of you know I am getting a 24 Coupe and will be moving the seat back. I think the Coupe has the proper upholstery but I would like to see some additional examples. Thanks again.

I'm probably going to be asking some questions so I thought I would start a new thread.
This is what we're talking about here:
Doing one video a week if you want to follow along.

Found 18awg brass safety wire in it - that transmission has never been apart! Very exciting...

Now - question. The mag field coil (you'll see next week) is in near...

Hey guys - I still have this engine sitting here getting dusty. Someone out there must need it. Got bills to pay here, gotta sell some stuff. Located in Middleborough MA. Cash and carry. Video examination so you can get a better look than just a still photo. Click this link to watch (it's on youtube):

Not all that exciting but I thought you guys would want to see what I found under all the gunk and dirt. Project is on hold (the engine anyway) until I can get some T parts sold or the videos go viral (unlikely). I am up to my eyeballs in bills here and apparently everything we own decided to break all at once - no joke, sewer drain, commercial...

Interesting delivery body on eBay with a Stan Howe history

For Sale: A Walden Worcester #6318 9/16” speed wrench with the 6418 attachment that turns this speed wrench into a one man tool for loosening or tightening 9/16 inch size bolts and nuts commonly found on Model T motors. Unlike many other speed wrenches of this type, the 6418 attachment is removable so the 6318 portion of the wrench can be used as...

Hello,
I have a 1921 coupe that came with a rear tire cover that said: Another Ford sold by F.P. Behlow
Watersmeet, Mich. Has anyone ever heard of an F.P. Behlow or have any knowledge of a ford dealership in watersmeel. It is pretty far up north, Ive been there once just to get a sign picture but there was no sort of historical society to ask.

For Sale: Alvord F3031-2-3 Model T main bearing reamer. This is a long reamer made by the Alvord Reamer Company of Millersburg, PA. It is designed to ream all three main bearings simultaneously. It is a good reamer to have when fitting a crankshaft to existing babbitt bearings. The reamer cuts bearings to the standard size of 1.250, but it’s...

For sale wrench marked 5Z-815 this is a crankshaft center bearing bolt wrench per the tool list asking $70.00 shipped to your location call Matt 503-824-2681

This is an Excellent Quality TT standard worm gear. Discoloration on the worm & bearing races is just dark spots or staining. It is nice and smooth all over. No rust or roughness. It has nice smooth bearing surfaces. Nice smooth surface finish and lack of rust is really important on these. $175 takes it. Please email if interested. Do not post...

1913-1914 early 1915. Bergs Made, Round Tube Radiator Kit. Very nicely made components and much heavier gauge material when comparing to a Brassworks. Inlet and outlet connections are solid cast brass , and core fully soldered by Bergs. High Quality.

Have many more up close photos.

Can ship but would be best to deliver to Chickasha.

$750...

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

D7B9062C-E522-4B67-A54F-B0D4FDB4E99F.jpeg 6914491C-16D5-4B4E-A701-931B02826F71.jpeg CFD3A8B7-0A0F-40CC-9ADD-EEDC59A45447.jpeg D5215BF7-86AE-45C4-8F34-65AC5F031076.jpeg

I would like to purchase a manifold as pictured (photo credit to Ken Jackman)

Please email me

Thank you

Waukesha Ricardo Intake cropped.jpg

For sale: slow speed drum $150 plus postage
20220723_084930.jpg

For sale: TT worm gear Ford script $200 plus postage
20221120_091907.jpg 20221120_091917.jpg 20221120_091947.jpg 20221120_091923.jpg 20221120_091937.jpg

FOR SALE: heavy solid brass headlight rims no cracks. $175 for the pair
inside diameter is 8 15\16
20220811_110735.jpg 20220811_110800.jpg

For sale: starter switch with extension $25 plus postage
20221224_110130.jpg 20221224_110140.jpg

For sale: Ford O license plate and tail light holder $45 plus postage
20221205_123235.jpg 20221205_123228.jpg 20221205_123219.jpg

For sale: black painted spider very good condition. Could be repainted or use as is. $50 plus postage
20221101_171238.jpg 20221101_171250.jpg

For sale: crankcase support brackets. 26/27 $25 plus postage

Early electric headlight with lens. Fits very late 1914 and early 1915 Model T Ford. This is the time when they were phasing out gas and bringing in electric headlights. Brass rim has a few minor cracks. As mentioned above has very good Spreadlight lens. $75

How difficult should it be to roll up the door glass? I have installed new safety glass in the drivers side door, and it is very, very hard to roll up. The glass is very tight in the channel.

I am in the process of installing the glass in the passenger side door. I have placed the glass into the channels but have not installed the raising...

I’m looking for a decent, original robe rail to attach to the back of the front seat. I know they make and sell them new, but I prefer original if I can find it.

Good day all,
We are attempting to build our EFR (Early Ford Registry) forum viewership, and wish to invite everyone on our MTFCA site to visit. You may register as a guest and post comments or new threads. Anytime you have early brass T era or pre-T info, or questions, please check in over there as well as here.

I’ve noticed over the years...

have rocky mountain trans on TT Truck it is stuck in Neutral
truck has not run in years
anyone have breakdown on Rockys Mountain Transmission
best way to free it up ?
thanks tom

Ash Wire Wheel Collection: 1- complete wheel; 6-wheel rims; 11-wheel centers; 7- lock rings; 2- front hubs; 2- rear hubs; 1 set new lug bolts; 1 set old lug bolts; set of 5 new brass hubcaps; set of 4 old original hubcaps; spokes and nipples to re lace wheels.
$2500 + ship or can deliver to Turlock or Tulare swap meets. DSCF8716.JPG DSCF8715.JPG...

For Sale Gray Davis #7 Gas Head Light, $190 or Best Reasonable Offer. See Attached Photographs.

Bosch model 600 clip on dist. Cam gear,nut,spacer,resister,and original instruction sheet.$30.00 plus $10.40 shipping cont. US. Ted 503-728-3476

For sale: An original 1911 Holley 4500 carburetor. The carburetor we are offering is all brass, complete and in very good condition. The levers and adjustment screw move freely, and the float also free. It can easily be restored to show quality. $1800 plus shipping.

F951CC59-D568-44CA-8005-FFF390122635.jpeg

The 4500 Holley differs from the...

For Sale: A complete set of self-adjusting connecting rod bolts for the Model T. These bolts replace the stock Ford connecting rod bolts. They are self-adjusting or tightening to keep the connecting rod bearings properly adjusted. The bolts are complete and in good used condition. This is a full set of eight, enough for all four connecting rods....

For sale: A genuine Stevens, NY reamer for the spindle body and spindle arm bushings. This reamer is two sizes and will do both the bushings in the spindle body and the spindle arms. Most importantly, it will ream the spindle body bushings to the correct .503” size Ford recommended when replacing the bushings. Reamers that will cut .503” are hard...