MTFCA Forum

For sale a new 6 volt Mitsubishi alternator!
Catalog price is$259+ tax and shipping
Mine is $200 plus shipping
Pm me if interested

6V Hutchins A-OOO-GAH horn. Needs restoration I tested this on a battery and while the motor does spin, it does not make the horn sound. $40 plus shipping or pickup in Burbank, CA
PXL_20240914_224028244.jpg PXL_20240914_224022421.jpg PXL_20240914_224016841.jpg PXL_20240914_224007098.jpg

I am making to take the T in the mountains for camping. This would involve going up continuous grades of more than 6% for many miles. And certainly, I would need to go above 10% grade in some sections. A friend of mine agreed in the sanity of this idea and suggested that I get an outside oil line installed. I have no excuse with a inventory of...

Howdy,
Seeing clutch springs advertised in classified section brings a question to mind. What is the compression rate (lbs) in one inch?
Thank you

My car has mirrors mounted to the upper door hinges. They seem useless, I can barely focus them and they dont keep the setting after a few miles due to vibration. Are they a silly add-on or would they be more effective mounted on the center hinge posts? If I want to remove them would I just replace with a standard pin?
The car has a wide rear view...

IMG_5445.png

One set of rear shock absorbers that have been identified as Steelbilt brand ( per this thread on the forum ). Most of the key pieces are there, though we are missing one of the bars with the two loops. Based on the pictures in the thread, it also appears that the existing bar may be misshapen, but that should be an easy fix. Asking $75 OBO plus...

I received the below assemblies in a box full of T parts from the widow of a T owner, but I'm having trouble identifying them. My first thought was that they are some sort of shock absorber, but I've not been able to find a match online. There is also a possibility that they are not a T part at all. Has anyone seen these before? Any help would be...

A friend of mine who is new to Model T-s could benefit from Milt Webbs book………I can’t find one on EBay for him…..Thanks!

Looking to buy 26 27 tudor driver seat any help is appreciated

The title is a bit of a misnomer since it was 3 days. We met in Virginia City, Nevada. We traveled to Carson City for a day, Reno to the National Auto Museum then a day of trains and the historic town. 11 cars and 24 people had a great time.

Andy
D88FF374-D8CA-4DEF-B5E4-346D3F282997.jpeg
The hundred mile view...

I just bought a Marquette tool to attempt to change my tires (since I ticked off ever tire place in town because of these clinchers). I wanted to ask if anyone has any literature or just pictures or a video of exactly how it is supposed to be used. Also, I saw a video once of a man mounting clincher tires on some English car. He placed a thin...

IMG_8085.jpeg IMG_8063.jpeg IMG_8064.jpeg IMG_8065.jpeg

Got a question on the 1911 Engine Block....are the Intake and Exhaust ports on the side of the block threaded for some sort of insert between the manifold and the block?

Also, on the 1911 Block is the oil fill a long tube running down the left side of the engine like on the 1909's?

So, if any of you guys has a 1911 block, disassembled or...

Nice original January 1914 sales catalog. Has a water stain in lower corner. It has the notice of speedometers being available. $100 plus $10 shipping. kdmks AT .att.net.

I think Robbie Price has used it. IMG_5465.png

Greetings Friends:

I'm a little ways into the delayed rebuild of the motor for my '23 touring car. I wanted to use the same crankshaft (it's still standard, incredibly), but my machinist just called to tell me that it failed the magnaflux test. Uh-oh.

So, now I'm in search of a good crankshaft. Anybody have one to spare? I'd be grateful to...

Need to be tested.

Time again for Lang's Old Car Parts Calendar! Lang's Old Car Parts is accepting photos of your Model T for our annual calendar. Photos and information are due by Friday October 14th! High quality photos only (photos from phones usually do not work). When sending the photo, make sure it is downloaded in FULL SIZE. Newer phones can take good enough...

Lenses are in great condition and are three inches in diameter. One is in primmer. Asking $55 for the pair plus small flat rate postage.
DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET front.jpg DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET back.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Here are 20 more driveshaft pinion nuts. NOS, but this maybe the last batch. I may find some more but I doubt it. I plan to keep the rest. $25 for the lot + shipping. Email me at address in pictures. Thanks Dan
IMG_3933.jpeg
IMG_0260.jpeg

A mining memorabilia collector has this in their collection. I think this would be a great badge to have reproduced.
goldfield 1.jpg goldfield 2.jpg

Home made mag coil winder. $25.00 plus shipping. kdmks AT att.net.

Stewart 26 speedo, for parts. $35.00. 1909-10 fine thread tie rod end, $35.00. 1913-14 side light bracket, $15.00. New repo brass radiator neck, $35.00. Valve cover door, $5.00. 4 body brackets, $10.00 for all. Original 1909-10 rear muffler end, $25.00. new repo 1911-14 muffler curved tail pipe, $20.00. 2 brass sediment bulbs, $25.00 for all....

I accidentally posted this to the OT forum, hopefully it can go here as well.

Looking for any information this Kwikway Multipurpose Machine. It will grind valves but looks like it can also be setup to undercut armitures and who knows what else.
Not exactly Model T, however it will be used to grind Model T valves.
Any help greatly appreciated,...

Hi All,
I found this image on a local Northport village calendar. Does anybody know what kind of car this is? I don't recognize it and I've been looking for photos of it all over. Thanks,
John
mystery car 1910.jpg

NOS crank handle spring and bushing. $75.00 plus shipping. kdmks AT att.net.

WTB RH quarter panel for a 1923-25 Roadster, If you might have the panel behind the door, this is what I am needing. Please let me know if anyone has one in their pile of T parts. Thanks...Mike

I am located in California. Willing to pick up locally if necessary. Looking for a 1926 Steering Gear Case/Cup. If it comes with cover, I am happy to purchase as set. Thank you. Lisa - lirogo27@aol.com

I am located in California. Willing to pick up locally if necessary. Looking for a 1926 Steering Gear Case/Cup. If it comes with cover, I am happy to purchase as set. Thank you. Lisa - lirogo27@aol.com

Asking $40 plus postage. APCO STEERING WHEEL NUT HORN BUTTON 2.jpg APCO STEERING WHEEL NUT HORN BUTTON 4.jpg APCO STEERING WHEEL NUT HORN BUTTON 1.jpg APCO STEERING WHEEL NUT HORN BUTTON 3.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

As I restore my 1917 Ford, I need a set of front and rear shackles. They are similar to the figure eight shackles but have no provision for an oiler. Any help is appreciated. See photo. Thanks, Russ Furstnow

Before our elder son was afflicted by a degenerative brain condition called Leucodystrophy, he was a talented artist, graphic designer and sculptor. His best works were in steel, using found parts and scrap. This one is my favourite.
20240913_121009.jpg

Here he is in an iron environment.

20240913_121058.jpg
I used Wood wheel hub plate to...

If you have a Ford manufactured prior to 1916, be sure to use a jamb nut for the adjustable ends. I just ran across one from one of my cars, where the throttle adjustment is barely holding on.

This photo has appeared on ebay, it shows women and men working on Model T's at what appears to be an emergency assembly line during or after the first world war.
Any one have an idea as to what is the story beind this? Possibly Model T Ford ambulances being rescued for reuse, what country might the soldiers be from?

This just showed up on a Facebook page called Searching for Treasures.
It’s a 27 T wrecker so says the Facebook page. It looks like it’s all there and is worth restoring. Maybe some you TT Truck folks know where this is or know about it. It’s been sitting in the weather for a good while but amazingly it seems to be mostly all there.

Click on the links for more detailed images. A lot of great photos.

ICE FOR FRENCH SICK AND WOUNDED SUPPLIED BY AMERICA. The American Ice Flotilla Committee has sent several Ice Flotillas to the French front to supply ice for the sick and wounded. The only possible way to have an ice supply at or near the front was through mobile ice making...

I picked this up yesterday as a sound backup carb but I'm interested in its history.
I guess it was fitted to UK Model T's?

I also got -
A home made air cleaner
A rear wheel hub puller I think, you agree?
One shockie
I think the 4 brass fittings are for a wind deflector, maybe not Model T

DSCN5015.JPG

DSCN5014.JPG

DSCN5017.JPG...

I have newly acquired 1915 Centerdoor with AC Brakes, which I know nothing about.
How do I adjust them?
Thanks,
Dave

I am located in California. Looking to purchase reasonably priced Front and rear bumpers for 1926 Coupe. Please let me know if you have any for sale! Will pick up from local seller if needed! Thank you! and much appreciated! Lisa - lirogo27@aol.com

The Ghost came with a repro carburetor pull rod that turns out to be a tad short, resulting in an overly frisky car.

The repro rod is 13 3/8 long, while Ford parts lists part 3535 as 13 13/16 to early 1915, and 14 5/16 from August 1915 on, with the adjusting end, part 3538, was dropped by early 1916 in favor if a one piece.

Is there a story...

I have recently acquired the tools and machinery to pour and size babbit, I am not professing to be an expert by any means.
However I have made some observations, it seems that the older engines I have disassembled which appear to have OEM Babbitt. I only “assume” these to be OEM, for example they would typically have cast iron pistons....

SoId to Paul! Here is an original 1913 to early 1915 Rubes horn. It has its share of bumps and bruises. It would be good for an unrestored car or ? Take a look at the photos, you get what it is.

The price is 100.00 and it includes shipping in the USA.

Call me at: 734-730-4274 or email: motoringicons@hotmail.com

Thanks.

Spartonet (model F) hand operated horn. The horn does work and appears to be complete; however, the knob / push assembly is quite loose. As a result, the push assembly will often not return to the fully extended position and requires a slight jiggle. Asking $30 plus shipping or can pick up in Burbank, CA.

PXL_20240914_221527646.jpg...

2 different kinds of oil pan support brackets. $125.00 for each plus shipping. kdmks AT att.net.

I adjusted the trans bands in our '21 Touring today. Then took it for a drive. Works good again.

WTB one rebuilt wood coil or one that just needs a cap. In Wisconsin. Thanks

Starting to get ready for Hershey CN66-69
Cloth covered spark plug wires, terminals, cloth covered primary wire, asphalt loom, clips and fasteners etc etc etc

Here's a lot of twenty Stransky vaporizers made for various vehicles of the Model T period. Comes with the original literature pictured. Asking $75 for the lot plus postage. These would make a great counter display. Here's some history on the Stransky company.
In the 1920s Pukwana billed itself as the biggest little town in South Dakota.

It might...

12.jpg
13.jpg
14.jpg
15.jpg
16.jpg
I found this in my transmission screen. I am assuming I am going to have to
pull the engine and repair the tranny.
What gear did it come from?

IMG_7856.jpeg IMG_7782.jpeg IMG_7736.jpeg IMG_7773.jpeg

Yep...2 days ago that day tour, today it was our club member Doug Galloway again hosting a fly-n-drive in good time at his rural airport. He has several Ts and flies. I just have T's! :lol:

It had over 40 places this year plus 6 model Ts & our Prez's '40 coupe. I gave 6 or 7 rides to various bunches of people in my '13 touring, of all ages, lots...

Just finished our fall tour. We did a big loop from Red Lodge MT to Cody WY and back to Red Lodge over the Bear Tooth Hwy. We stayed a day in Cody to visit the Buffalo Bill Museum. Great country for a Model T drive.

BB Tour Up The Clark Fork of the Yellowstone 9-24 1.jpg

IMG_8333.JPG

IMG_8338.JPG

This professionally restored Tail light has been in our display case since the early 1990's. It's in like new condition and ready to mount on your T. Asking $325 plus postage. You would be hard pressed to find a nicer one!
STOP light 1.jpg STOP light 2.jpg

Please use this email address below and NOT the personal messaging system to contact me....

Looking for any information this Kwikway Multipurpose Machine. It will grind valves but looks like it can also be setup to undercut armitures and who knows what else.
Not exactly Model T, however it will be used to grind Model T valves.
Any help greatly appreciated, Thanks in advance,
Kevin

1911 Model T Enclosed Runabout (Torpedo) for sale. The car is a June 1911 Model T with a Wilson body (as opposed to a Beaudette). It was restored about 25 years ago and it is painted a dark Mercedes blue.  It has all white tires front and rear.   The car was restored according to the original shipping record obtained from the Benson Ford Research...

An assortment of miscellaneous items as escribed below. Mark Chaffin (951) 805-0928

20240619_130538.jpg
Waterpump pulley assortment for flat and V belt. Get all three for $25.00 plus $8.50 domestic shipping.

20240814_095310.jpg
Atwater Kent Distributor Coil units. $25.00 each or get the pair for $40.00. Domestic shipping $18.50...

Sure is getting crowded in the shop these days…

IMG_2597.jpeg

I was driving along after work enjoying myself when suddenly I heard a clank and a crash from what sounded like underneath the car. I looked behind me and there was a black round thing in the road. Thankfully it was just a small gravel road and I was able to stop and pick it up. Coming up on it I thought I had some sort of catastrophic failure...

Part no. 3539C that attaches steering column to chassis rail. Will be made as mirror image of standard unit.
Most likely to surface in Australia, U.K., New Zealand or Argentina right hand drive markets ?
I could actually make use of 2 of them.

I lost a latch handle on the road somewhere, luckily the nut was on the running board. Does anyone have an extra?
Thanks

Looking for other owners of a Koupet Top, Thanks.

This new old stock accessory helps smooth out the steering when you hit a rut or lip in the road that grabs the steering wheel. Asking $40 plus postage.

steering control 2.jpg steering control 1.jpg steering control 3.jpg steering control 4.jpg steering control 5.jpg

Cleaning out some coffee cans and have multiple matched sets of the threaded Timken's available - clean & ready to grease - photos coming soon - $100 pair includes Priority Mail in the U.S. Drop me a note through the Forum, please.

This is a much sought after timer elevator that moves any standard timer up to a easy location to get at for maintenance. The gears are in excellent condition. Comes with a new proper control rod that a friend and fellow forum member made for me from his pattern for this unit. Asking $250 plus postage.
Thomas Timer Elevator 1.jpg Thomas Timer...

This is a new old stock one hundred year old accessory that will automatically adjust your carburetors mixture. It uses a bi-metallic strip like a home thermostat uses. Asking $60 plus shipping. Scharoun Carburetor control 1.jpg Scharoun Carburetor control 2.jpg Scharoun Carburetor control 3.jpg Scharoun Carburetor control 4.jpg

Please use the...

A fellow today offered me what seems like a fair trade, a nice looking but unrestored 1916 Maxwell touring car. It has presentable paint and original interior the motor is complete and turns over freely. The top is bad. That is all he or I can say about it. He bought it to get another early car and has no interest in the Maxwell. I have only seen...

I have a new, unfinished firewall of the 1911/1912 two piece variety. I plan to stain it using Laurel Mountain cherry stain. For those of you who have done this staining, how much stain is needed? Since front and back need staining, it seems like it would take a whole lot more than one of the 4 oz. containers that Laurel Mountain sells.

I recently decided to remove the windshield on my August 1924 Touring to tend to some rust and replace the rubber bits. As part of this, I will need to paint the cowl as well. I figured, removing the cowl should make the process of masking easier by eliminating it. Boy was I in for a surprise. Once I got a closer look, the top rail that goes from...

I am in the process of restoring my Ruckstell rear end. I had to replace many parts including the axle shafts. Now I tried to install the left (the Ruckstell) axle housing to the axle shaft. This did not work as the diameter of the modern axle bearing in the axle housing is smaller than the diameter of the axle shaft. When I tried to do that, I...

German soldiers examine a hastily abandoned field workshop where two examples of imported armoured cars were in the process of being repaired.

The Russian Army received 22 Lanchesters in December 1915. 19 of them were later rearmed with 37-mm naval Hotchkiss gun instead of a .303 Vickers machinegun.

8876202662_877b511c4e_o.jpg

Since I am getting rid of the mag on the car I am installing oil slappers. My question is, how many oil slapper would you use, 2,4,6 or 8. Wondering if to many slappers will increase the pressure and not enough will not move the oil.

Thanks in advance

Living in Los Angeles I am looking for a great re-builder. Please don't mention H&H.

IMG_1525.jpeg IMG_1515.jpeg IMG_1403.jpeg IMG_1169.jpeg

Rather rare and very clean 1924 Mattoon Illinois under 27 hp plate, perfect for a model T. See attached image for size and condition. $50.00 delivered CONUS.

I recently pressed a set of pins out of a flywheel I was re-purposing. They looked pretty good so I cleaned them up and measured them. They are slightly tapered to the outer end. The worst one was .0025 down.
These are old originals with the small shoulder at the back so they don't come out.
If you were to reuse them in the absence of proper...

So today was the start of a long stretch of famous balmy, non-muggy Ohio days. So off 6 of us went to a place called Sorrowful Mother Shrine for a comfortable picnic tour. Jeff Swope, our youngest member of this clubs touring gang is handy with apps. He always has a recording of where we go. An app called Track My Journey. So this time along with...

Daisy was born on or about March 2nd 1914.
One thing that has been in my possession for decades is a newsprint from the LA Times saved (along with other vintage front page news by my Great Grandma Annie Elizabeth (my Model A named in her honor)). Anyway, it's been buried in a box until it came to mind recently and I dug it out...to find it was...

Looking for a good used pedal pad assembly for a 28 with multiple disc clutch. ( goes around steering column and pedals to seal). I know they make new ones but I have an original unrestored car and new parts just stick out like a sore thumb.

Please see photo for size. Enamel. Good condition. $40.00 delivered lower 48.

Beautiful brand new trailer that I just bought. The trailer is 7’- 6” wide by 7’- 6” tall interior by 16’ long plus the 2’ V nose. Rear door fold down, led lights, plywood interior sides and floor, silver color with screwless outside paneling. I ordered the 7’- 6” wide since I like to know what is happening behind me while towing down the road and...

IMG_5983.png I have a 1918 Model T Couplet removable post car for sale. It’s a very rare car that needs to be saved. There are less than 20 left in the world. No motor, but included are window frames, door latches, doors and truck lid, cowl light brackets, seat springs that were copied from an original car, upholstery cloth ( 9 1/2 yards), splash...

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Set of three Boyco running board cans (9-3/8 deep). These are in decent shape, but do note the dent in the unpainted can. $200 OBO plus shipping. Local pickup in Burbank, CA

PXL_20240912_234903324.jpg PXL_20240912_234845157.jpg PXL_20240912_235622719.jpg PXL_20240912_234927264.jpg PXL_20240912_234910925.jpg

Is the headlamp tubing the same material as fuel line?
Should I use it my headlamp tubing that’s surplus to make a new fuel line or does someone need it?

WTB: 1919-1921 Coupe with a pickup bed instead of the turtle deck. Running and drivable. Not interested in a Roadster pickup. 1919-1921 Coupe with turtle deck will be considered. (Am posting for a neighbor who does not have internet.) All leads are appreciated. Please send pictures via PM messaging. Thank you.

Brass top tank main ring $60
Brass bottom tank mounting brackets set of 3 $24
Locking E & J side levers set of 2 $125
Brass Thumb nuts with the brass screw good for the head lights as well as the generator set of 5 $50
Brass top tank gas tap $ 60 small amount to screw the lever in
Please email daveandjand@gmail.com

PRICE REDUCED to 235.00 INCLUDING SHIPPING IN THE USA!

Here is a large, brass bulb horn. It is made in France and stamped 175 Auto Escargot Marque & Model Deposes and Paris Marque Deposes . These were made for the European and American market in the period of about 1905 to 1913. It is about 10 tall and the bell is 7 in diameter. The inlet is...

PRICE REDUCED TO 185.00 INCLUDING SHIPPING IN THE USA!

This Gray and Davis #115 tail lamp is about 9 1/2 tall and is probably from about 1911 to 1914. It is missing the clear side lens, which is easy to make. The body, chimney and font are brass. The door and top are steel. The red lens is in good condition as is the burner assembly. Overall,...

PRICE REDUCED TO 325.00 INCLUDING SHIPPING IN THE USA!

Here is a great and rare Solar taillamp that dates from 1910 to 1914ish. This lamp measures about 9 1/2 inches tall. It is in excellent condition including the two lenses, burner, etc. It is brass with nickel trim over brass. There are no dents or cracks. A super taillamp.

The price is...

10 new 1909-1912 E & J Carbide Generator mounting brackets, excellent reproduction $130US delivered anywhere in USA and Canada.

These photos were sent to me by a relative asking if I knew what the heck it was. I said I’d ask here. It looks like it converts a non demountable to a demountable rim. We were speculating that it might be used for a quick change for a flat but that’s just a wild guess. Anyone got any info on it?

For Sale - listing for a friend
1920 Roadster - Near Lexington, MI. I have worked on this car and can attest that the description is correct. This is NOT a project car, it has been extensively restored and is ready to tour. The body is in excellent condition (9.5) as is the upholstery and top. The engine has been refreshed and the transmission...

I am having some carb backfiring and wanted to see if anyone had insights before I start “trying” things to fix it.

Here is what I have: 26 engine,rajo BB head, Winfield SR down draft, AB distributor. Fuel is hand pump, set to 1.5 psi with an hidden regulator. Engine was built in the 70s, I rebuilt the Winfield and distributor this winter...

Looking for a Splitdorf model D magneto distributor cover/cap. The mag I have it is missing it.

Thanks!

Scam Warning

There is a fake website for Howell's Sheet Metal, so beware!

That fake is .fordor . us

Screenshot 2024-09-12 at 5.52.23 PM.png

The valid website for Howell's is closed now for on-line ordering. If you order from the fake website on-line you will be scammed.

Warning from friend in Jacksonville FL. who used this fake site and...