MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 244 matches

Topics

Replies

Views

Last post

Upholstering my ‘24 Touring

Last post by Pep C Strebeck « Tue Mar 28, 2023 11:02 pm
Posted in General Discussion Forum
Replies: 2
by Harvey Bergstrom » Tue Mar 28, 2023 9:27 pm » in General Discussion Forum

First post

I will be upholstering my touring car this spring and want to know if anyone has any photos of the job anyone else has done. I got a kit from Classtique & it is beautiful! Of course I don’t want to mess it up in any way, so just trying to do some homework before tackling the job. Any photos and comments appreciated!

Last post

I know it is not a Touring, but the link below is for the first video in a series that the gentleman did on his '24 Runabout. He installed a new top and interior. I think there were 6 videos that he posted on the new top and interior for the Runabout, it looked quite good when all done.

2 Replies

37 Views

Last post by Pep C Strebeck
Tue Mar 28, 2023 11:02 pm
Why Can I Not Post Photos?

Last post by JTT3 « Tue Mar 28, 2023 10:44 pm
Posted in General Discussion Forum
Replies: 2
by BLB27 » Tue Mar 28, 2023 9:29 pm » in General Discussion Forum

Why can't I post photos that are taken with my phone in vertical position?

2 Replies

36 Views

Last post by JTT3
Tue Mar 28, 2023 10:44 pm
Front axle coil spring clips

Last post by kgibbo « Tue Mar 28, 2023 10:41 pm
Posted in General Discussion Forum

by kgibbo » Tue Mar 28, 2023 10:41 pm » in General Discussion Forum

What are these wire springs and where do I get new ones?

0 Replies

29 Views

Last post by kgibbo
Tue Mar 28, 2023 10:41 pm
Old photos of mother in law roadsters

Last post by Distagon2 « Tue Mar 28, 2023 10:24 pm
Posted in General Discussion Forum
Replies: 3
by Herb Iffrig » Tue Mar 28, 2023 9:11 pm » in General Discussion Forum

First post

model T roadster.JPG Model T mother in law seat roadster.JPG

Last post

I used Photoshop. These pictures interest me since I am working on a 1912 Commercial Roadster with the mother-in-law seat. I have been a photographer since I was 14 (I am 67 now) and have spent hours and hours in darkrooms, etc. I know the old school photography well including the chemistry. What happens to these old photos is that the image may...

3 Replies

104 Views

Last post by Distagon2
Tue Mar 28, 2023 10:24 pm
Measuring piston clearance after rebore

Last post by Dan Hatch « Tue Mar 28, 2023 10:21 pm
Posted in General Discussion Forum
Replies: 9
by BobUkPipedream » Tue Mar 28, 2023 3:40 pm » in General Discussion Forum

First post

Hi All,

Well I am slowly progressing, crank is now good as are the con rods all at 1.5 thou clearance with no binding. They were a pig to balance, I ended up doing twenty measurements and averaging…

So I thought I would check my pistons. These are new cam ground 0.20 oversize. I told the machine shop that bored the block to go with 0.0035...

Last post

Check your wrist pins too. Most need a little honing cause they are too tight and will lock up.

9 Replies

236 Views

Last post by Dan Hatch
Tue Mar 28, 2023 10:21 pm
knocking engine

Last post by JTT3 « Tue Mar 28, 2023 10:19 pm
Posted in General Discussion Forum
Replies: 34
by ElGranadaT » Mon Mar 27, 2023 7:39 pm » in General Discussion Forum

First post

Hello all,

I finally got my 22 touring barn find running today. It starts ok its firing on all cylinder well but it has a clear knock. The knock is in time with one of the pistons and it gets progressively louder as it heats up. After a few minutes it gets VERY loud and the engine slows to a stop.

this is not good -

My guess is its a bearing...

Last post

Looking at the rod cap & the rod still seated on the crank I see no sweeps or the X grove completed nor a radius cut completely or correctly in the cap/rod. Is the #2 cylinder showing some scoring? The other thing that I’m seeing is there’s not much or any clearance between the rod and crank shoulder preventing any side to side float. Bad juju...

34 Replies

652 Views

Last post by JTT3
Tue Mar 28, 2023 10:19 pm
WTB: 1926 rear spring clamp, longer than the normal one

Last post by bmklawt « Tue Mar 28, 2023 9:58 pm
Posted in Classifieds - Parts
Replies: 6
by bmklawt » Thu Mar 23, 2023 11:18 pm » in Classifieds - Parts

First post

Learned something new today, evidently there is a longer than the normal rear spring clamp (U bolt) and I need to find a pair of the long ones for my 1927 Touring. Let me know if you have 1 or 2 your willing to part with
Picture from an old post

Last post

The one on the left does not work, the threaded portion is not long enough, where is steps from threaded to flat it hits the out turned lip on the cross member.

6 Replies

296 Views

Last post by bmklawt
Tue Mar 28, 2023 9:58 pm
Aluminum hogshead

Last post by KWTownsend « Tue Mar 28, 2023 9:51 pm
Posted in Classifieds - Parts
Replies: 2
by KWTownsend » Tue Mar 28, 2023 2:22 pm » in Classifieds - Parts

First post

This aluminum hogshead with lettered pedals will need some repair where the last hole closest to the block is broken.
$75 Free delivery to Portland Swap Meet this coming weekend.
20230328_110846.jpg

Last post

Holding for Tom...

2 Replies

218 Views

Last post by KWTownsend
Tue Mar 28, 2023 9:51 pm
FS 1910 brass Holley carburetor

Last post by KimDobbins « Tue Mar 28, 2023 9:41 pm
Posted in Classifieds - Parts
Replies: 2
by KimDobbins » Tue Mar 28, 2023 6:08 pm » in Classifieds - Parts

First post

This is a reproduction carb made be the late Ernie Brown of Antlers, OK. Ernie was a top notch pattern maker and machinist. He did first class work as you can see. Ernie reproduced the 1909-11 Kingston 5 ball, 1910, 1911 and 1912 Holley carbs. There are many of Ernie’s carbs on running cars today and many of the owners have no idea that he made...

Last post

Carb is sold.

2 Replies

137 Views

Last post by KimDobbins
Tue Mar 28, 2023 9:41 pm
Grease hemorrhage

Last post by Norman Kling « Tue Mar 28, 2023 9:36 pm
Posted in General Discussion Forum
Replies: 1
by M.Sinclair » Tue Mar 28, 2023 9:31 pm » in General Discussion Forum

First post

Hello,
Broke out the t for the first time and noticed a flow of grease and oil out of the u joint. It was grease followed shortly after by a mix of oil. I believe the grease melted and flowed out. What grease should be used in the u joint?
Regards,
Matthew

Last post

You should have one gasket. Between the 4th main and the transmission. The cover on the outside of the U joint should be tight against the 4th main. The grease should be pumped until full and the bushing in the driveshaft also be packed with grease. Thick grease. The grease will keep some of the oil from flowing out or down the tube to the rear...

1 Replies

67 Views

Last post by Norman Kling
Tue Mar 28, 2023 9:36 pm
Help Identify Old Family Model T

Last post by robert daniello « Tue Mar 28, 2023 9:13 pm
Posted in Old Photos
Replies: 2
by slcphoto » Wed Mar 08, 2023 5:51 pm » in Old Photos

First post

Are these two attached images of a Speedster Model T? Looks like my great granduncle might have raced his in California. I'm hoping to uncover the exact year and model variety of this particular car. Thanks for any help!

Last post

Maxwell Q4 Sportsman

2 Replies

87 Views

Last post by robert daniello
Tue Mar 28, 2023 9:13 pm
Waking up a Sleepy T

Last post by Model T Ron « Tue Mar 28, 2023 8:34 pm
Posted in General Discussion Forum
Replies: 24
by Model T Ron » Sun Mar 26, 2023 9:06 pm » in General Discussion Forum

First post

I have had my 1924 Coup for about a month now but prior she was not used much for the last 4 years. The first thing I did was remove the package shelf and move the seat back 5 inches. This took a bit longer than expected as I found some wood rot that needed to be fixed... It was a bit of work but well worth the gained legroom. Then it was on to...

Last post

Yep belt should be 27 inches and I have 31 plus.......I have a feeling she will run better without having the belt hitting the timer :roll: :roll: :lol:

Scott I do appreciate you saving me some time sorting this out. I always like to talk to experts on hear and someday I hope to be one :D

24 Replies

757 Views

Last post by Model T Ron
Tue Mar 28, 2023 8:34 pm
Left front fender Wanted

Last post by wyankee « Tue Mar 28, 2023 8:27 pm
Posted in Classifieds - Parts

by wyankee » Tue Mar 28, 2023 8:27 pm » in Classifieds - Parts

I am looking for an nos or unrestored left front fender for a 1923 low cowl touring. I am finishing an unrestored car and want everything to match.Thanks

0 Replies

53 Views

Last post by wyankee
Tue Mar 28, 2023 8:27 pm
How Do Ya’ll Do It ?...

Last post by John kuehn « Tue Mar 28, 2023 8:24 pm
Posted in General Discussion Forum
Replies: 5
by George House » Tue Mar 28, 2023 6:31 pm » in General Discussion Forum

First post

...I’ve recently had the good fortune to acquire most of the correct ‘3 bolt’ muffler for my 1914 runabout. Thankfully, the center and middle ORIGINAL baffles are still in good shape as is the tail pipe. However I had to order the external muffler shell from one of our suppliers. Therein lies my problem: The cast iron muffler diameters are...

Last post

Before you order call the supplier and to measure the largest shell O.D. of their product. Lang’s will help you about that and I’m sure others will top. But do ask about it.

5 Replies

194 Views

Last post by John kuehn
Tue Mar 28, 2023 8:24 pm
Tulare co. Fairgrounds swap meet

Last post by Mike Lebsack-Iowa « Tue Mar 28, 2023 8:03 pm
Posted in General Discussion Forum
Replies: 10
by KimDobbins » Thu Mar 09, 2023 1:18 pm » in General Discussion Forum

First post

April 13-15, setup day is April 13. New location this year, Tulare County Fairgrounds. This is traditionally a great swap meet! See you there.

Last post

Thanks Bob.

10 Replies

760 Views

Last post by Mike Lebsack-Iowa
Tue Mar 28, 2023 8:03 pm
Model T Snowmobile Question

Last post by Boaski « Tue Mar 28, 2023 7:54 pm
Posted in General Discussion Forum
Replies: 6
by Boaski » Mon Mar 27, 2023 8:13 pm » in General Discussion Forum

First post

I'm looking for some input and advice regarding how realistic an idea I have is.

Here is a little background information: I'm looking at retiring in about 5 years and we'll probably be downsizing shortly thereafter (or so I've been told...). My main hobbies have been vintage and antique snowmobiles as well as some old tractors & a few old cars &...

Last post

Thanks for the responses. Even though I had hoped for a different answer, I'm glad to have some real input on what I was thinking of doing. I had hoped that the T touring snowmobile idea would scratch a couple itch's, but that doesn't sound like a realistic option. I'm glad to know that now rather than when I'm part way through the project.

I'm...

6 Replies

314 Views

Last post by Boaski
Tue Mar 28, 2023 7:54 pm
FS—> 1912 Wisconsin Tag.

Last post by Runabout « Tue Mar 28, 2023 7:46 pm
Posted in Classifieds - Parts

by Runabout » Tue Mar 28, 2023 7:46 pm » in Classifieds - Parts

Nice 1912 Wisconsin license plate, $150 plus shipping.
4 Ball Kingston Carburetor. Ran extremely well and idled like a dream on my 1915 T then it took a dump and started leaking fuel, I’m sure a needle valve and seat is needed, $250. plus shipping. I’ve got the correct carburetor for my T now so this one is available....

0 Replies

61 Views

Last post by Runabout
Tue Mar 28, 2023 7:46 pm
Speedometer swivel bracket?

Last post by ThreePedalTapDancer « Tue Mar 28, 2023 6:56 pm
Posted in General Discussion Forum
Replies: 1
by Steve Jelf » Tue Mar 28, 2023 5:15 pm » in General Discussion Forum

First post

The clamp-on swivel bracket on my 1915 didn't want to stay put. So I bought a #2696B spindle arm, the one with a hole in it for a swivel bracket. I thought it would be pretty simple to make a bracket that would take a bolt through the hole and remain solidly in place. But it turns out the hole is tapered. I expect I can make a tapered part that...

Last post

I guess it depends on the speedometer swivel that is being used. This is for a Stewart.

07DC72EB-5FAD-4B15-A2CF-D004D9CC9D8A.jpeg
BD8B5572-D26B-4A15-9EF4-858BE918B7E6.jpeg

1 Replies

86 Views

Last post by ThreePedalTapDancer
Tue Mar 28, 2023 6:56 pm
**FATE**

Last post by Professor Fate « Tue Mar 28, 2023 6:54 pm
Posted in OT - Off topic
Replies: 37
by Professor Fate » Sat Sep 10, 2022 9:52 pm » in OT - Off topic

First post

20210918_104823.jpg

Last post

bigfimages.jpeg

37 Replies

2899 Views

Last post by Professor Fate
Tue Mar 28, 2023 6:54 pm
FS 1917 T Coupelet

Last post by Dliepelt « Tue Mar 28, 2023 6:50 pm
Posted in Classifieds - Vehicles
Replies: 43
by Dliepelt » Tue Nov 08, 2022 7:11 pm » in Classifieds - Vehicles

First post

1917 T Coupelet, convertible top version with oval quarter windows. Older restoration but very presentable. Wire wheels and Ruxtell axle. Hasnt been on the road in many years. An unusual chance to own a very rare and desirable T. Link to photo album with many photos.

Car is in Binghamton, NY
Asking $21,000 or respectful offer.
Call Rob:...

Last post

The owner also has an unrestored '16 Runabout available. That would be a perfect donor chassis for this car.

43 Replies

9144 Views

Last post by Dliepelt
Tue Mar 28, 2023 6:50 pm
Pre 1918 rear axle

Last post by speedytinc « Tue Mar 28, 2023 6:39 pm
Posted in General Discussion Forum
Replies: 4
by Craig Leach » Sun Mar 26, 2023 3:42 pm » in General Discussion Forum

First post

Hi guy's
I'm putting together a rear for a upcoming project and found out the axle is a pre 1918. This has thrown a monkey wrench in my plans
on several points. First using the outside seals I prepurchased is out of the question. Fortunately Az Terry has a pair of early 2510 caps.
The other issue is there dosen't seem to be enough room for a...

Last post

I use a 3 90 degree disk grinder to first grind a 1/16 - chamfer.
Then hand grind to the edge close. Finish & square up on a bench belt sander.

I do use the current neoprene inner seals.
BUT, they fit way to tight on the axle & will grab & shred themselves or grab & delam off the steel washer.
I cut the tight sleeve back to the molded in raised...

4 Replies

254 Views

Last post by speedytinc
Tue Mar 28, 2023 6:39 pm
FS Stromberg OF carb

Last post by KimDobbins « Tue Mar 28, 2023 6:16 pm
Posted in Classifieds - Parts

by KimDobbins » Tue Mar 28, 2023 6:16 pm » in Classifieds - Parts

For Sale is a NOS gold plated Stromberg OF. Complete beautiful carb. $800.00. Kdmks AT att.net.

0 Replies

138 Views

Last post by KimDobbins
Tue Mar 28, 2023 6:16 pm
Stable diffusion

Last post by John kuehn « Tue Mar 28, 2023 6:12 pm
Posted in General Discussion Forum
Replies: 23
by John E. Guitar » Mon Mar 27, 2023 3:02 am » in General Discussion Forum

First post

These are images generated by Artificial Intelligence on the Stable Diffusion website.

You type in a description (eg Model T Snowmobile) and hit Generate Image.

I wonder if anyone recognises the photos they are based on?

Stable Diffusion 7.jpg
Stable Diffusion 6.jpg
Stable Diffusion 5.jpg
Stable Diffusion 4.jpg
Stable Diffusion...

Last post

This is the 2001 SCI-FI movie that turned to be was a predictor in the direction we’re going.
It’s closer than you think.

23 Replies

818 Views

Last post by John kuehn
Tue Mar 28, 2023 6:12 pm
rocky mountain brakes

Last post by Barteldes « Tue Mar 28, 2023 5:35 pm
Posted in General Discussion Forum
Replies: 2
by Barteldes » Tue Mar 28, 2023 5:17 pm » in General Discussion Forum

First post

I have a 24 coupe and think i should get the rocky mountain brakes. I dont care if i die but it would be a shame to hurt that Beautiful car. Where do i start? Langs? Are they hard to install? And is it better to get the petal rather than welding on a tab yourself?

Last post

Agree, you can mend, the car cant be put back the same. :D
You can buy them directly. Vintage Ford has an advertisement.
Easy to install, but expect some clearance issues. Most folks add axle shims. I hate that. Changing to longer axles makes for a much bigger job.
I have always welded my own pedal extension. Until fairly recently, new pedals...

2 Replies

97 Views

Last post by Barteldes
Tue Mar 28, 2023 5:35 pm
Posting photos

Last post by Randall strickland « Tue Mar 28, 2023 5:27 pm
Posted in General Discussion Forum
Replies: 5
by Randall strickland » Tue Mar 28, 2023 8:55 am » in General Discussion Forum

First post

I used to post pictures but now a yellow triangle comes up, what am I doing wrong? Thanks

Last post

Use to be able to post pic from my phone without doing anything ,don't know why I had to start resizing

5 Replies

199 Views

Last post by Randall strickland
Tue Mar 28, 2023 5:27 pm
Stewart Speedometer & Swivel

Last post by Bruce Compton « Tue Mar 28, 2023 5:12 pm
Posted in Classifieds - Parts
Replies: 1
by KWTownsend » Tue Mar 28, 2023 2:32 pm » in Classifieds - Parts

First post

Stewart Model C, correct for 1913 in very nice condition. Untested, but drum turns when input is turned. $150.

Rebuilt swivel, 2-1/2:1 Rebuilt, very nice. $275

Price is firm, selling for widow.

Free delivery to the Portland Swap Meet this coming weekend.
20230328_111022.jpg

Last post

Email sent on speedo head.

1 Replies

176 Views

Last post by Bruce Compton
Tue Mar 28, 2023 5:12 pm
2024 Tour to Eastern Europe, Hungary

Last post by YellowTRacer « Tue Mar 28, 2023 4:58 pm
Posted in General Discussion Forum
Replies: 22
by Sarikatime » Wed Feb 01, 2023 5:07 pm » in General Discussion Forum

First post

We are in the planning stages of putting together a model T tour in Eastern Europe, with the antique automobile and model T club of Hungary, and the caretakers of the Jozsef Galamb museum in September of 2024.
Gathering information to find out if anyone would be interested in a 15 day tour that includes Budapest and Vienna with your own model T....

Last post

Karen and I are also interested in going so keep us in the loop.

Ed aka #4

22 Replies

2004 Views

Last post by YellowTRacer
Tue Mar 28, 2023 4:58 pm
Source for rocky mountain brakes

Last post by DanTreace « Tue Mar 28, 2023 4:56 pm
Posted in General Discussion Forum
Replies: 1
by Nv Bob » Tue Mar 28, 2023 3:31 pm » in General Discussion Forum

First post

I have sent rocky mtn brake an email with not reply
Just need afew small things for TT brake setup

Last post

Have phoned before to get replacement pieces, easiest way. More and more emails can just end up in spam at busy places.

Just remember the time zone at this CA location. Call mid day for best result

745672.jpg

1 Replies

124 Views

Last post by DanTreace
Tue Mar 28, 2023 4:56 pm
WTB 13-14 carbide generator

Last post by BrassTee1914 « Tue Mar 28, 2023 4:44 pm
Posted in Classifieds - Parts
Replies: 1
by A400 » Sat Mar 25, 2023 6:30 pm » in Classifieds - Parts

First post

Hoping to find a carbide generator appropriate for a mostly original car with a 50 year old paint job. Must be excellent and complete.

Last post

I have a generator looks NOS .Complete.

1 Replies

200 Views

Last post by BrassTee1914
Tue Mar 28, 2023 4:44 pm
FS 1911-12 7 rivet oil pan

Last post by KimDobbins « Tue Mar 28, 2023 4:44 pm
Posted in Classifieds - Parts
Replies: 5
by KimDobbins » Fri Mar 24, 2023 2:34 pm » in Classifieds - Parts

First post

For sale is a pretty nice 7 rivet oil pan. It has the correct removable bottom and 1 piece retainer. Good solid pan. $1500.00 plus shipping. kdmks AT att.net.

Last post

Pan is sold

5 Replies

442 Views

Last post by KimDobbins
Tue Mar 28, 2023 4:44 pm
What have you done to your model T in March

Last post by Rich Eagle « Tue Mar 28, 2023 4:02 pm
Posted in General Discussion Forum
Replies: 37
by modernbeat » Wed Mar 01, 2023 11:59 pm » in General Discussion Forum

First post

Installed a working switch panel with illumination into the camping car.

Last post

I transformed my Art Studio into a Wheel sanding and paint shop today. The studio consists of and easel mounted to a workbench.
WShop1.jpg
I applied a coat of tractor paint to my spare wheel last fall and have allowed it to dry for 4 or 5 months. It and the epoxy underneath wet sand nicely now. Using a strip of top material to back up the...

37 Replies

2218 Views

Last post by Rich Eagle
Tue Mar 28, 2023 4:02 pm
Vale Alan in Western Australia

Last post by perry kete « Tue Mar 28, 2023 3:39 pm
Posted in General Discussion Forum
Replies: 2
by Allan » Tue Mar 28, 2023 5:49 am » in General Discussion Forum

First post

In the thread Who's that in the photo? Alan invited me to post a photo of him on a visit to us here in South Australia. Before I could work out just which photo he was referring to, the news came that his five year fight against leukemia had taken its toll, and he passed just after his 70th birthday

Alan had restored a 1926 T roadster pickup that...

Last post

Allen,

Sorry to hear about the loss of your friend and fellow Model T'er. I hope that you will find a photo and post it as he requested.

Denny

2 Replies

223 Views

Last post by perry kete
Tue Mar 28, 2023 3:39 pm
Amazing crash... no serious injuries

Last post by JohnM « Tue Mar 28, 2023 3:21 pm
Posted in OT - Off topic
Replies: 4
by TXGOAT2 » Mon Mar 27, 2023 12:22 pm » in OT - Off topic

First post

Storyful 3-27-23 (On Yahoo News today)
Headline: Tire Shoots Off Truck and Flips Car on Los Angeles Freeway

The front left wheel came off a pickup on the freeway just ahead of a Kia SUV. The Kia went over the rolling wheel and was launched into the air, flipped, and came down on its top, then rolled and landed on its wheels. As the Kia slid to a...

Last post

I retired after 25 years driving a semi for one of the two largest package delivery companies. We were well trained to perform a through pretrip inspection and allowed twenty minutes to do so at the start of each shift. Unfortunately some drivers would rather spend that time BSing with other drivers.

It is a habit that continues in my...

4 Replies

213 Views

Last post by JohnM
Tue Mar 28, 2023 3:21 pm
NOS Kingston coil points

Last post by KWTownsend « Tue Mar 28, 2023 2:25 pm
Posted in Classifieds - Parts

by KWTownsend » Tue Mar 28, 2023 2:25 pm » in Classifieds - Parts

Limited quantity of NOS Kingston coil points.
$7.50 per set.
Free Delivery to the Portland Swap Meet this coming weekend.

0 Replies

114 Views

Last post by KWTownsend
Tue Mar 28, 2023 2:25 pm
Ford reamers

Last post by speedytinc « Tue Mar 28, 2023 2:19 pm
Posted in General Discussion Forum
Replies: 2
by Randall strickland » Tue Mar 28, 2023 1:40 pm » in General Discussion Forum

First post

What fixtures do these reamers use

Last post

Those ring thingy's with the 4 internal tabs (I see 5 units) are bendix drive counterweights.
They have some value to a bendix restorer. Not to be arbitrarily pitched.

2 Replies

158 Views

Last post by speedytinc
Tue Mar 28, 2023 2:19 pm
Round gas tank

Last post by KWTownsend « Tue Mar 28, 2023 2:16 pm
Posted in Classifieds - Parts

by KWTownsend » Tue Mar 28, 2023 2:16 pm » in Classifieds - Parts

Nice round gas tank 1913-1920 $225
Free delivery to Portland Swap Meet this weekend.

20230328_110918.jpg

0 Replies

130 Views

Last post by KWTownsend
Tue Mar 28, 2023 2:16 pm
Tobin Arp Mike FS

Last post by Dan McEachern « Tue Mar 28, 2023 2:16 pm
Posted in Classifieds - Parts
Replies: 4
by Dan Hatch » Sun Mar 26, 2023 11:17 am » in Classifieds - Parts

First post

Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg

Last post

Just to add a little more info, this mic is for use on a 1.125 diameter boring bar. It can be used for a smaller bar by making shoes to reduce the diameter of the bridge that sits on the bar. I have one set up this way that I use with a 3/4 boring bar.

4 Replies

437 Views

Last post by Dan McEachern
Tue Mar 28, 2023 2:16 pm
VR on generator

Last post by TRDxB2 « Tue Mar 28, 2023 2:12 pm
Posted in General Discussion Forum
Replies: 13
by kgibbo » Mon Mar 27, 2023 10:30 pm » in General Discussion Forum

First post

I’ve heard that a Voltage Regulator (cutout look alike) is smarter than the original generator cutouts. How is the generator third brush adjusted when a VR is used…or does it even matter?

Last post

Wow - I went back and click on the image with the multiple items and got a different page saying its a cut-out - and explains the differences. hen ADDITIONAL INFO says Voltage regulator
reliable 3.png
--
---
---
They do have a refund policy
refund ,,,,.png

13 Replies

351 Views

Last post by TRDxB2
Tue Mar 28, 2023 2:12 pm
Off Topic Door Handle ID.

Last post by Jerry VanOoteghem « Tue Mar 28, 2023 2:00 pm
Posted in OT - Off topic
Replies: 3
by Brian D » Sun Mar 26, 2023 4:27 pm » in OT - Off topic

First post

WTB.
I need to match this door handle on my Dad's Street rod. No idea what it really goes to. Anyone help with identifying or have this handle.
Brian Dowell 586 864 5110

Last post

Looks very much like 1932 Cadillac Lasalle handles

3 Replies

129 Views

Last post by Jerry VanOoteghem
Tue Mar 28, 2023 2:00 pm
FS 1913 pair of Wisconsin license plates

Last post by KimDobbins « Tue Mar 28, 2023 1:05 pm
Posted in Classifieds - Parts
Replies: 1
by KimDobbins » Fri Mar 24, 2023 6:31 pm » in Classifieds - Parts

First post

Nice pair of 1913 Wisconsin license plates. $300.00 plus shipping. Kdmks AT att.net.

Last post

back to top

1 Replies

220 Views

Last post by KimDobbins
Tue Mar 28, 2023 1:05 pm
FJ - Some Humor To Brighten Your Day

Last post by FreighTer Jim « Tue Mar 28, 2023 1:05 pm
Posted in OT - Off topic
Replies: 1635
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

13

14

15

16

17
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

B3D44AFE-3C49-4E36-9CF2-EC0261CCA22F.jpeg

FJ
1635 Replies

372622 Views

Last post by FreighTer Jim
Tue Mar 28, 2023 1:05 pm
Who's that in the photo?

Last post by Jeff Perkins « Tue Mar 28, 2023 1:03 pm
Posted in General Discussion Forum
Replies: 53
by RGould1910 » Tue Mar 07, 2023 6:36 pm » in General Discussion Forum

First post

I thought I'd start a new thread showing photos of members. We've lost a few and added a few and it would be nice to see who we're communicating with. I'll start the ball rolling
Richard Gould, 77yo
20220123_073436.jpg

Last post

Grandson Rosco getting a Model T driving lesson from me.

53 Replies

3312 Views

Last post by Jeff Perkins
Tue Mar 28, 2023 1:03 pm
wood finger joint box for a KW Coil

Last post by Mark Nunn « Tue Mar 28, 2023 12:57 pm
Posted in Services
Replies: 1
by CraneJon » Sun Mar 19, 2023 2:35 pm » in Services

First post

Whis is making the finger joint box for a repop KW Coil?
Thank you
Jon Crane
cranejon@hotmail.com

Last post

Search for Jon Anderson

1 Replies

64 Views

Last post by Mark Nunn
Tue Mar 28, 2023 12:57 pm
26/27 Amp Meter FS

Last post by Dan Hatch « Tue Mar 28, 2023 12:51 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 2:31 pm » in Classifieds - Parts

First post

Here is a 26/27 amp meter. Looks like an original, but I am not sure. Needle moves, don’t know if it works. $25.00. Email me at address in pictures. Thanks Dan.
339BEADE-64FF-41AA-BA80-F1775EA1443A.jpeg
F13962B9-E4A6-4468-B6BD-DF5C07DA0A12.jpeg
80B89D7E-7F36-4C5D-9CCC-8D12F7CC95E3.jpeg

Last post

Back to the top

3 Replies

251 Views

Last post by Dan Hatch
Tue Mar 28, 2023 12:51 pm
Switch panel FS

Last post by Dan Hatch « Tue Mar 28, 2023 12:50 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Sun Mar 26, 2023 11:36 am » in Classifieds - Parts

First post

Early switch panel. Has lock tumbler in, key 55. But does not turn. No switch parts. Has an amp meter, don’t know condition. Needle does move. $20.00 + shipping. Email me at address in pictures. Thanks Dan.
00147A12-0BB5-4D8B-B28A-BD6007ED9848.jpeg
C69B8233-77B5-433A-A18F-1943ED243095.jpeg
2F6D2D44-50B1-49FD-97A9-D3E3FAD901C1.jpeg

Last post

Back to the top

2 Replies

304 Views

Last post by Dan Hatch
Tue Mar 28, 2023 12:50 pm
NOS T 3420 FS

Last post by Dan Hatch « Tue Mar 28, 2023 12:49 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Sun Mar 26, 2023 11:01 am » in Classifieds - Parts

First post

Here are some 3420 low speed adjusting screw lock nuts. They are NOS. $2.50 each + shipping. Email me at address in pictures. Thanks Dan
678F7B03-52B7-47D5-A937-DC3361E6AC98.jpeg
2C7F4E1C-8724-4945-A34E-6179FC149B8F.jpeg

Last post

Back to the top

2 Replies

501 Views

Last post by Dan Hatch
Tue Mar 28, 2023 12:49 pm
FOR SALE - 1924 CALIFORNIA LICENSE PLATE MATCHED PAIR

Last post by Model_T_Family « Tue Mar 28, 2023 12:38 pm
Posted in Classifieds - Parts
Replies: 1
by Jay In Northern Ca. » Sat Mar 25, 2023 9:17 am » in Classifieds - Parts

First post

These plates are in excellent near new shape, in primmer, and just need to be painted the proper colors for the year. I checked them out with California Department of Motor Vehicles a while back and they were clear in the system to register on your 1924 California year of make vehicle. Asking $95 plus postage.
1924 plates 1.jpg 1924 plates 2.jpg...

Last post

Emailing you.

1 Replies

179 Views

Last post by Model_T_Family
Tue Mar 28, 2023 12:38 pm
6Th Annual Model T- Model A- Prewar Swap. Minnesota.

Last post by FreighTer Jim « Tue Mar 28, 2023 12:13 pm
Posted in General Discussion Forum
Replies: 11
by BobP » Sun Mar 05, 2023 3:08 pm » in General Discussion Forum

First post

We are having our 6th annual Model T- Model A - prewar swap meet and car show at our farm Saturday April 22, 2023 stating at 7AM. Free overnight primitive camping. Free setup, free admission. Restroom and lunch wagon on site. Location is 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell or look. Questions, call 507 458...

Last post

Bump for Bob

FJ

11 Replies

718 Views

Last post by FreighTer Jim
Tue Mar 28, 2023 12:13 pm
Old Photo- Guys at work

Last post by Jerry VanOoteghem « Tue Mar 28, 2023 11:37 am
Posted in General Discussion Forum
Replies: 6
by Herb Iffrig » Mon Mar 27, 2023 4:30 pm » in General Discussion Forum

First post

At work.JPG

Last post

My dad straightened many pans without a jig. The jig doesn't straighten the pan, it only tells you when or if it's straight. (I know the jig can also act as an anvil in the straightening process. I'm not saying it isn't a valuable tool.) I wouldn't be surprised if the pan in the photo went from the press to a jig, to check their progress.

6 Replies

446 Views

Last post by Jerry VanOoteghem
Tue Mar 28, 2023 11:37 am
MTFCA Annual Meeting

Last post by FreighTer Jim « Tue Mar 28, 2023 10:57 am
Posted in General Discussion Forum
Replies: 1
by AndyClary » Tue Mar 28, 2023 9:30 am » in General Discussion Forum

First post

Wasn’t there a meeting last weekend? Any reports or photos?

Andy

Last post

Ron & Karen Custer did a helluva job
by all accounts and fun was had by all.

7DF0A225-48C1-45F4-8948-7D607DD0F945.jpeg

There are many pictures on Miss Karen’s
Facebook Page:

@

There are many pictures on Ron’s Facebook Page:

@

For those on Facebook - I conducted a 13 minute
with Ron Custer two years ago - can see it
on the Southern...

1 Replies

137 Views

Last post by FreighTer Jim
Tue Mar 28, 2023 10:57 am
quick bolt set

Last post by Gene_French « Tue Mar 28, 2023 10:48 am
Posted in Classifieds - Parts

by Gene_French » Tue Mar 28, 2023 10:48 am » in Classifieds - Parts

for sale ... reproduction quick bolt set for models A and T Ford main bearings ... these are made from grade 8 bolt stock and 1045 steel ...all US materials and manufactured by me , here in USA ... introductory price of $250 plus $15 postage in lower 48 states ,includes the 6 bolts , nuts and quick keepers for ends ... i will add photos this...

0 Replies

104 Views

Last post by Gene_French
Tue Mar 28, 2023 10:48 am
Accessory Hayes Wire Wheels 30x 3.5 For Sale

Last post by Alex Dragone « Tue Mar 28, 2023 10:16 am
Posted in Classifieds - Parts
Replies: 3
by Alex Dragone » Tue Mar 21, 2023 10:26 am » in Classifieds - Parts

First post

Offered here is a pair of front accessory Hayes wire wheels. They are the 30 x 3.5 size. The outside rims are in great condition. One is missing the front spokes. These accept regular 30 x 3.5 inch demountable rims and fit directly to model T spindles using regular bearings.

Asking $400 plus shipping for the pair. Thanks!

Last post

These are sold pending payment. I have not checked the forum in a few days. Ted if the sale falls through I will give you a call, but other buyer contacted me first. Thanks

3 Replies

623 Views

Last post by Alex Dragone
Tue Mar 28, 2023 10:16 am
Original Hempy Cooper Line Boring jig for sale

Last post by Alex Dragone « Tue Mar 28, 2023 10:13 am
Posted in Classifieds - Parts
Replies: 3
by Alex Dragone » Tue Mar 21, 2023 10:30 am » in Classifieds - Parts

First post

This is a really nice original and complete Hempy Cooper line boring jig from the early 1920s for Model T blocks. It is complete with original shaft, gears and cutters. Great unit. Asking $500 plus shipping.

Last post

Sorry I sold it to a local friend before I saw your message. Thanks for your interest and if you are looking for anything else just let me know. Thanks so much and sorry about that. - Alex

3 Replies

521 Views

Last post by Alex Dragone
Tue Mar 28, 2023 10:13 am
Zero Maintenance Timer

Last post by Quickm007 « Tue Mar 28, 2023 10:00 am
Posted in Classifieds - Parts
Replies: 1
by MKossor » Sat Mar 25, 2023 11:43 am » in Classifieds - Parts

First post

Tired of messy timer maintenance every 500 Miles? Surging, jerking, missing....

An Ideal Timer is completely maintenance Free and direct drop in replacement for the stock mechanical timer. Start on battery and run on Magneto, the I-Timer is immune to timing cover misalignment and provides reliable coil activation precisely synchronized with...

Last post

Hi Mike, Great product, I used for several years and very sastisfied. I would like to buy another one for my other car. I sent you an email

1 Replies

331 Views

Last post by Quickm007
Tue Mar 28, 2023 10:00 am
MERCURY FRONT AXLE for sale

Last post by Jonny Eriksson « Tue Mar 28, 2023 9:39 am
Posted in Classifieds - Parts
Replies: 1
by Jonny Eriksson » Sun Mar 26, 2023 3:32 pm » in Classifieds - Parts

First post

I’m selling one of my Mercury front axles. Good condition and with good threads.
$3000 plus shipping. Located in Sweden.

Last post

I’m selling one of my Mercury front axles. Good condition and with good threads.
$3000 plus shipping. Located in Sweden.

1 Replies

426 Views

Last post by Jonny Eriksson
Tue Mar 28, 2023 9:39 am
WTB antique jack

Last post by FATMAN « Tue Mar 28, 2023 9:25 am
Posted in Classifieds - Parts
Replies: 3
by MdDWS » Mon Mar 27, 2023 3:46 pm » in Classifieds - Parts

First post

WTB a jack like the black one in the pic.4199376284

Last post

modelt2001@comcast.net
or call 815-633-7244
Bob

3 Replies

263 Views

Last post by FATMAN
Tue Mar 28, 2023 9:25 am
Berg’s Radiator upper hose connection

Last post by John.Zibell « Tue Mar 28, 2023 8:57 am
Posted in General Discussion Forum
Replies: 15
by Dave Young » Sun Mar 26, 2023 9:42 pm » in General Discussion Forum

First post

I’ve got what may be the last new Berg’s radiator, that I bought from him last winter just as he was shutting down the business. The box arrived, I peeked inside and put it away til needed. Well, opened it up today to install on my ‘26 RPU and saw that the upper hose neck is very different than all of my other radiators. Not only does it take a...

Last post

To prevent leaks I use clear RTV on my hose connections. It seals the connection and prevents corrosion. When you want to remove the hose simply twist and it comes right off.

Do you put the rtv inside the hose?

on the part the hose goes over.

15 Replies

580 Views

Last post by John.Zibell
Tue Mar 28, 2023 8:57 am
This was trucking-Old Photos

Last post by Herb Iffrig « Tue Mar 28, 2023 8:30 am
Posted in OT - Off topic
Replies: 1241
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

9

10

11

12

13
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

Way Bach then he was.
1241 Replies

269527 Views

Last post by Herb Iffrig
Tue Mar 28, 2023 8:30 am
FJ - Spring Is Time To Service Your Model T Trailer Brakes - Here Is A Smoking Deal !

Last post by FreighTer Jim « Tue Mar 28, 2023 5:14 am
Posted in General Discussion Forum

by FreighTer Jim » Tue Mar 28, 2023 5:14 am » in General Discussion Forum

Being on the road it is essential to
do preventative maintenance on my
enclosed aluminum car hauler trailer.

If you trailer your Model T or other vehicle
this is something you might be interested in.

I usually stop at Johnson RV Surplus
because it is right off the I-80 turnpike
just east of Elkhart, Indiana:

@

But that is not always...

0 Replies

174 Views

Last post by FreighTer Jim
Tue Mar 28, 2023 5:14 am
Street scene Emery SD- photo

Last post by Wayne Sheldon « Tue Mar 28, 2023 1:44 am
Posted in General Discussion Forum
Replies: 3
by Herb Iffrig » Mon Mar 27, 2023 10:06 pm » in General Discussion Forum

First post

1913 Hanson County fairboosters.JPG

I wish I knew how to zoom in on the radiators.

Last post

And here I thought it was a rough town? Not that I would want to be too abrasive about it?

3 Replies

256 Views

Last post by Wayne Sheldon
Tue Mar 28, 2023 1:44 am
a short trip to yesteryear

Last post by TXGOAT2 « Mon Mar 27, 2023 10:31 pm
Posted in OT - Off topic
Replies: 4
by ironhorse » Tue Mar 07, 2023 10:48 am » in OT - Off topic

First post

I had to buy a new safe. The old one was one I bought from an S&L that moved to a new location and this one had been used for the cashiers drawer storage. The hinges were so worn that I was having great difficulty closing the door. while cleaning out the safe there in the back corner in an old Yuban coffee can I found some of my old coins. I never...

Last post

I remember real money.... coins with intrinsic value and paper currency redeemable for silver or gold.

4 Replies

385 Views

Last post by TXGOAT2
Mon Mar 27, 2023 10:31 pm
My 1927 Model T Coupe Restoration

Last post by BLB27 « Mon Mar 27, 2023 10:28 pm
Posted in General Discussion Forum
Replies: 109
by BLB27 » Fri Apr 23, 2021 11:13 pm » in General Discussion Forum
1

2
First post

The restoration of my 1927 coupe is underway. I will post photos as it proceeds. Hope you will find them interesting. I have 27 photos to post now. Can I include all of them in one post? Any suggestions on how best to do this and how to continue to record the restoration over the next several months?

Last post

Nine coils came with the T when I purchased it in 1954. Eight of the coils tested OK for restoration. I had the Coil Man restore five and the other three will be kept for future restoration if needed.
109 Replies

9446 Views

Last post by BLB27
Mon Mar 27, 2023 10:28 pm
Yet another puzzle

Last post by Herb Iffrig « Mon Mar 27, 2023 10:09 pm
Posted in OT - Off topic
Replies: 426
by Rich P. Bingham » Sun Apr 10, 2022 11:26 am » in OT - Off topic
1

2

3

4

5
First post

Sis helping Dad to . . . ? An appealing photo, but what's the make and midel of the car ?? :lol: (No date or location for the pic)

Last post

high wheel car.JPG
426 Replies

22952 Views

Last post by Herb Iffrig
Mon Mar 27, 2023 10:09 pm
FAIRBANKS SCREW PRESS

Last post by RGould1910 « Mon Mar 27, 2023 9:49 pm
Posted in Classifieds - Parts
Replies: 18
by Chaffins » Sat Mar 11, 2023 5:42 pm » in Classifieds - Parts

First post

THIS IS THE MOST VALUABLE TOOL I HAVE IN MY SHOP. IT WILL STRAIGHTEN ANYTHING. CAMSHAFTS, CRANKSHAFTS, DRIVE SHAFTS, FRONT AXLES, REAR AXLES. , REAR AXLE HOUSINGS. I WOULD NOT SELL IT IF I WASN'T SO OLD. $6.000.00 951-735-4791 DSC0433 PRESS.JPG

Last post

Well I'd sure like to buy it if we could agree on a price. I hope you bring it but I can't in good faith make any promises

18 Replies

1922 Views

Last post by RGould1910
Mon Mar 27, 2023 9:49 pm
FS COMPLETE CHASSIS

Last post by Mark Chaffin « Mon Mar 27, 2023 9:16 pm
Posted in Classifieds - Parts

by Mark Chaffin » Mon Mar 27, 2023 9:16 pm » in Classifieds - Parts

I have several complete Model T chassis' available for purchase. All late model years. $500 to $1500. Come take a look. Cash and carry. Located at the garage in Lake Elsinore, CA. Mark Chaffin (951) 805-0928

0 Replies

294 Views

Last post by Mark Chaffin
Mon Mar 27, 2023 9:16 pm
FS ENGINES AND RUCKSTELLS

Last post by Mark Chaffin « Mon Mar 27, 2023 9:12 pm
Posted in Classifieds - Parts

by Mark Chaffin » Mon Mar 27, 2023 9:12 pm » in Classifieds - Parts

Time to get some of the shop floor space cleared up. I have many complete engines (1917-1927) and several Ton Truck Ruckstell rear Axles with outside brakes that need to find new homes. Come take a look $200 each. Cash and carry. Located at the garage in Lake Elsinore, CA. No shipping. Mark Chaffin (951) 805-0928

0 Replies

328 Views

Last post by Mark Chaffin
Mon Mar 27, 2023 9:12 pm
Seat back question.

Last post by Mopar_man « Mon Mar 27, 2023 8:55 pm
Posted in General Discussion Forum

by Mopar_man » Mon Mar 27, 2023 8:55 pm » in General Discussion Forum

So I want to make sure I get the layering correct. Got my kit from Classtique ( a very well made kit!!). For a 26 touring. Starting from the vinyl to the springs for the front seat back.

1. Vinyl this has a layer of cotton and then burlap secured with the buttons that are on the rear of the seat.

2. Next 2 layers of cotton that was marked...

0 Replies

89 Views

Last post by Mopar_man
Mon Mar 27, 2023 8:55 pm
Bad Seal

Last post by Mark Gregush « Mon Mar 27, 2023 8:47 pm
Posted in OT - Off topic
Replies: 11
by StevenS » Tue Mar 21, 2023 10:01 pm » in OT - Off topic

First post

I looked underneath the truck today and discovered I had a bad seal on my differential.

bad seal.jpg

Last post

Look at a map some time, we have them past Portland Oregon in the Willamette river and below Bonniville Dam in the Columbia. ;)

11 Replies

391 Views

Last post by Mark Gregush
Mon Mar 27, 2023 8:47 pm
Getting Rattles Back On The Road

Last post by Mopar_man « Mon Mar 27, 2023 8:45 pm
Posted in General Discussion Forum
Replies: 459
by Mopar_man » Sat Jan 04, 2020 6:34 pm » in General Discussion Forum
1

2

3

4

5
First post

So about 3 and a half years ago my wife found a 1926 Touring for sale in the local paper. I went to look at the car and bought it. The guy showed me a video of the car running form the previous year. He said the the Clutch was stuck and that was why the rear wheel was now not moving. As I took a better look at it when I got it home I found that...

Last post

Well my back is getting better and I was able to install the rear side panels. Working on getting the puckering out. I bet the sun will help.

IMG_6672.jpeg

I also was able to get a 26/7 windshield from Lang's as well as some other odds and ends.

IMG_6673.jpeg
459 Replies

112812 Views

Last post by Mopar_man
Mon Mar 27, 2023 8:45 pm
Tulare 2023 Just a Few Weeks Away!!!

Last post by TLeroux « Mon Mar 27, 2023 8:44 pm
Posted in General Discussion Forum
Replies: 18
by 67pontiac » Mon Mar 20, 2023 6:30 pm » in General Discussion Forum

First post

Greetings All!! Get ready for a wonderful and rewarding Tulare Swap Meet at the Tulare County Fair Grounds on April 14-15 2023. Move-in day is April 13 from 9:00am to 6:00pm. This year we have a new and, (hopefully), permanent venue. After two years at the Agri-Center, we moved to the Fair Grounds. This will be a Pre-War ONLY event this year, much...

Last post

I will bring KR Wilson babbit tools fixture and pouring pot and molds

18 Replies

842 Views

Last post by TLeroux
Mon Mar 27, 2023 8:44 pm
RARE TOOL, STEVENS T-181

Last post by Chaffins « Mon Mar 27, 2023 7:37 pm
Posted in Classifieds - Parts
Replies: 2
by Chaffins » Sun Mar 26, 2023 6:00 pm » in Classifieds - Parts

First post

STEVENS T-181 THREAD CHASING TOOL, MODEL T HUB, RARE $1,000.00 STEVENS T-181.jpg

Last post

KEN, ONE RECENTLY S0LD FOR $900.THERE ARENT MANY AROUND

2 Replies

665 Views

Last post by Chaffins
Mon Mar 27, 2023 7:37 pm
SOLD: "My Auto Book: Indispensable to the Motorist" C.1908. A fabulous early motoring book.

Last post by Linus Tremaine « Mon Mar 27, 2023 7:37 pm
Posted in Classifieds - Parts
Replies: 5
by GGZ » Sun Jul 10, 2022 2:51 pm » in Classifieds - Parts

First post

This is a really great, original book. My Auto Book: Indispensable to the Motorist is a first edition with a 1908 copyright date and written by The Outing Publishing Company. This hardcover book measures about 7 1/2 by 5 and has about 200 pages. It is a log book where motorist would write the date of each trip, the names of those who attended,...

Last post

I could be wrong but I think the book is blank.

I have many early auto books but only a few with trip details filled in and I don’t wish to sell them.

Sorry I can’t help you.

5 Replies

707 Views

Last post by Linus Tremaine
Mon Mar 27, 2023 7:37 pm
WTB 18-22 top irons roadster two man type

Last post by Model T Mark « Mon Mar 27, 2023 7:32 pm
Posted in Classifieds - Parts
Replies: 1
by Model T Mark » Sun Mar 26, 2023 7:38 pm » in Classifieds - Parts

First post

Looking to buy top irons square type for my son’s new to him 22 roadster. Trying to find a set to match a patina car. They are the two man variety. New would be acceptable if you purchased a set and have changed direction. Mark Eyre, Email meyre14t@yahoo.com.

Last post

Found! Less than 24 hours thank you Russ!

1 Replies

128 Views

Last post by Model T Mark
Mon Mar 27, 2023 7:32 pm
The Time Machine

Last post by BUSHMIKE « Mon Mar 27, 2023 7:08 pm
Posted in General Discussion Forum
Replies: 57
by BUSHMIKE » Fri Mar 10, 2023 10:44 am » in General Discussion Forum

First post

We did a 1400 mile, 26hr turn & burn on the retrieval to my new to me 1926 TT. We aptly named it the Time Machine. The condition of the cab is nothing short of amazing! The previous owner scuff sanded and cleared the lower panel behind the drivers door and with that exception the paint is 100% Henry Ford original! Not a single bit of rust other...

Last post

Having a TT has been a lifelong dream for me. Having to buy and rebuild on a serious budget makes this one even sweeter. All the Forest Service roads around me are still hibernating under 3ft of packed snow. Its gonna kill me waiting another month and a half to start putting some miles on the Time Machine. At least that gives me time to go thru...

57 Replies

2180 Views

Last post by BUSHMIKE
Mon Mar 27, 2023 7:08 pm
19 roadster seat back upholstery

Last post by JvanMaanen « Mon Mar 27, 2023 7:01 pm
Posted in General Discussion Forum
Replies: 5
by JvanMaanen » Wed Mar 22, 2023 5:13 pm » in General Discussion Forum

First post

I am looking for pictures of the seat back upholstery on a 19 roadster. I am especially interested in the area of the arm rests and where the body dips down from the top bow saddle bracket to the arm rest. I want to know how close the upholstery follows the body contour. Inside and outside views with the top up would be great. If anyone has a...

Last post

thanks Rich, just what the doctor ordered

5 Replies

264 Views

Last post by JvanMaanen
Mon Mar 27, 2023 7:01 pm
13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY

Last post by havnfun « Mon Mar 27, 2023 5:34 pm
Posted in Classifieds - Parts
Replies: 59
by Dan Hatch » Thu Feb 16, 2023 1:57 pm » in Classifieds - Parts

First post

These are for the Pinion Bearing Bolts. Special size not available at hardware store.
Please use email address in picture, not PM

Taps are done! Sending out totals

I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an...

Last post

Dan,

Taps I ordered arrived today, thnx for getting these made.

59 Replies

3312 Views

Last post by havnfun
Mon Mar 27, 2023 5:34 pm
1915 Horn

Last post by ThreePedalTapDancer « Mon Mar 27, 2023 4:49 pm
Posted in Classifieds - Parts
Replies: 4
by ThreePedalTapDancer » Mon Feb 27, 2023 4:33 pm » in Classifieds - Parts

First post

1915 horn. Nice solid condition, has new brass screen and cover. Appears dent free, has a few tiny dings here and there. 150.00 includes shipping lower 48.

F5DB5DBE-B07F-40C4-AAAF-B34B9511B956.jpeg 4292B1DF-D5D9-4504-B536-8FCE69FD65B4.jpeg

Last post

Still for sale and available

4 Replies

619 Views

Last post by ThreePedalTapDancer
Mon Mar 27, 2023 4:49 pm
Is it 110 or 240 volt

Last post by Been Here Before « Mon Mar 27, 2023 4:26 pm
Posted in General Discussion Forum
Replies: 13
by ABoer » Sun Mar 26, 2023 9:44 am » in General Discussion Forum

First post

From a friend I got a Octopus Growler ,he is made in England .
Here in the Netherlands we have 240 Volt AC .
So I like to know or this growler is 110 or 220 Volt .
Thanks for your answer .

Toon 001.JPG 002.JPG 003.JPG

Last post

Also see:

13 Replies

598 Views

Last post by Been Here Before
Mon Mar 27, 2023 4:26 pm
WTB Splitdorf and Benton Spark Plugs

Last post by Tadpole « Mon Mar 27, 2023 3:22 pm
Posted in Classifieds - Parts
Replies: 3
by Tadpole » Tue Feb 28, 2023 7:38 am » in Classifieds - Parts

First post

I will buy any and all Splitdorf or Benton mica insulated spark plugs regardless of condition.
You can reach me with the email in the attached photo below.

Thanks!

Last post

Yes sir! I am always in search of more plugs and parts.

3 Replies

290 Views

Last post by Tadpole
Mon Mar 27, 2023 3:22 pm
youtube short

Last post by Herb Iffrig « Mon Mar 27, 2023 3:15 pm
Posted in OT - Off topic

by Herb Iffrig » Mon Mar 27, 2023 3:15 pm » in OT - Off topic

0 Replies

86 Views

Last post by Herb Iffrig
Mon Mar 27, 2023 3:15 pm
FS Brass Single Twist Horn

Last post by 25tfire « Mon Mar 27, 2023 2:50 pm
Posted in Classifieds - Parts

by 25tfire » Mon Mar 27, 2023 2:50 pm » in Classifieds - Parts

Brass Single twist horn and fittings made by Standard, pictures to your email or text. Asking $275 plus shipping by USPS Priority Box. Jim

0 Replies

162 Views

Last post by 25tfire
Mon Mar 27, 2023 2:50 pm
Enclosed Car Trailer Optimal Size

Last post by George House « Mon Mar 27, 2023 2:33 pm
Posted in General Discussion Forum
Replies: 11
by SurveyKing » Sun Mar 26, 2023 9:40 pm » in General Discussion Forum

First post

I am wanting to purchase an Enclosed trailer to haul a single Model T Touring and am looking for some advise on what the size enclosed trailer one should use. I want to be able to go in and out with the top up with a 1924 Touring Car that has a height of about 7 feet and a 1909 that is about 7 foot three inches. The height of the door would be...

Last post

😂 yes, pic was taken when trailer is new Tim. I think decals were added before I hauled a T. I previously had a 7’ wide 14’ enclosed trailer. Was almost impossible to exit a 26-27 T when driven in. Thankfully, 8.5’ width is common to most manufacturers. Don’t think I could negotiate my entry gate with a 20’ trailer.

11 Replies

488 Views

Last post by George House
Mon Mar 27, 2023 2:33 pm
Important News About Tulare Swap Meet

Last post by 67pontiac « Mon Mar 27, 2023 2:31 pm
Posted in General Discussion Forum

by 67pontiac » Mon Mar 27, 2023 2:31 pm » in General Discussion Forum

I just spoke with Debbie at the Fair Grounds. If you want a space for this year's event, please contact Debbie, or me, by this Friday. They want to close the registration by April 3rd. Debbie's phone number is: (five five nine)686-four seven zero seven. My number is: (five five nine)967-zero one one two. You really don't want to miss this event....

0 Replies

151 Views

Last post by 67pontiac
Mon Mar 27, 2023 2:31 pm
Timing Gear Set FS

Last post by Dan Hatch « Mon Mar 27, 2023 1:39 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Sun Mar 26, 2023 11:22 am » in Classifieds - Parts

First post

Here are a set of new crank and cam gears for sale. Extra to me. Cam gear is Al. Crank gear is steel. $75 for set + shipping. Email me at address in pictures. Thanks Dan
0E83CAC6-7465-470F-AD1A-B06E1985E5A1.jpeg
8713CF87-D705-4212-B9EF-05395750205E.jpeg
E5CCD905-2C89-4925-BB78-48BE167BC3E2.jpeg

Last post

Sold pending payment.

2 Replies

276 Views

Last post by Dan Hatch
Mon Mar 27, 2023 1:39 pm
Revitalizing Chickasha Pre-War swap meet

Last post by Steve Jelf « Mon Mar 27, 2023 1:33 pm
Posted in General Discussion Forum
Replies: 62
by JTT3 » Mon Mar 20, 2023 2:31 pm » in General Discussion Forum

First post

If this post is not in compliance with the MTFCA / Forum I will delete my post & ask Chris to delete the thread.

In an effort to help with ideas on how we can make Chickasha pre-war swap meet a must go to event, what would you do.
I encourage your constructive input, try not to just be negative. Sure you have to talk about a problem but have a...

Last post

One little correction: I don't think the meet has ever ended on Sunday, at least since I started going many years ago.

62 Replies

2260 Views

Last post by Steve Jelf
Mon Mar 27, 2023 1:33 pm
Vintage Ford Magazine Binders

Last post by Erik Johnson « Mon Mar 27, 2023 1:28 pm
Posted in Classifieds - Parts
Replies: 2
by Erik Johnson » Sun Mar 26, 2023 7:50 pm » in Classifieds - Parts

First post

15 binders for the Vintage Ford magazine published by the Model T Ford Club of America

Each binder holds six issues (one year) of Vintage Ford

$30

Local pick up in south Minneapolis or I can deliver them to Bob Peterson's April 22 swap meet in Kenyon, MN

Last post

I sent you a private message.

2 Replies

260 Views

Last post by Erik Johnson
Mon Mar 27, 2023 1:28 pm
FJ - 1913 Ford Dealership Saved From Destruction

Last post by Rich Eagle « Mon Mar 27, 2023 12:01 pm
Posted in General Discussion Forum
Replies: 15
by FreighTer Jim » Tue Mar 31, 2020 6:54 pm » in General Discussion Forum

First post

Some know Robert ( Bob ) Peterson.

For those that don’t - Bob lives between Rochester & Minneapolis in Kenyon, Minnesota.

He has several Model T’s and Model A’s.

He hosts a Swap Meet at his farm each year.

What caught my eye - about 2.5 years ago Bob purchased the 1913 Ford Dealership Building in his small hometown in a sealed bid auction....

Last post

Thanks for bumping this back. It was fun all over again.
Rich

15 Replies

4658 Views

Last post by Rich Eagle
Mon Mar 27, 2023 12:01 pm
Tire Install with the Garbage Bag Trick

Last post by Steve Jelf « Mon Mar 27, 2023 11:17 am
Posted in General Discussion Forum
Replies: 14
by Flivver » Sat Mar 25, 2023 5:35 pm » in General Discussion Forum

First post

How I install a tire with NO TIRE LEVERS. No risk of scratching the paint on the wheels.
TireInstallOutlineYTThumbnail.png

Last post

The first time I mounted new clinchers it was a half-hour-per-tire struggle. Since I bought some 24 irons and have had the experience of using them a few times, the job is much easier. In fact, when I mounted a couple of new clinchers last week I forgot to powder the second one and still had it on the rim in well under five minutes. Some practice...

14 Replies

692 Views

Last post by Steve Jelf
Mon Mar 27, 2023 11:17 am
Surging?

Last post by TXGOAT2 « Mon Mar 27, 2023 10:54 am
Posted in General Discussion Forum
Replies: 10
by colonelpowers » Sun Mar 26, 2023 8:35 pm » in General Discussion Forum

First post

I thought I would check in with the experts before I take to tinkering tomorrow. Not too much to my dismay at the moment all of our modern vehicles are having issues so our 26 touring has had to step up to fill the void. Today I had to run to Wytheville (about 60 miles roundtrip) to get some feed for our mules. Going there I noticed what I...

Last post

I would see if the tank needs cleaned, and if it is reasonabley free of debris, a mirror can be used on a sunny day to look into the tank for evidence of rusting, dirt, or fine debris suspended in the fuel. Do not use a flashlight! Have the tank full, and shake the car to stir up fine particles, then use the mirror to reflect sunlight into the...

10 Replies

221 Views

Last post by TXGOAT2
Mon Mar 27, 2023 10:54 am
Reground Cam ID?

Last post by Dan Hatch « Mon Mar 27, 2023 10:21 am
Posted in General Discussion Forum
Replies: 10
by Dan Hatch » Sun Mar 26, 2023 10:56 am » in General Discussion Forum

First post

I got a reground cam in a box marked.295 lift. How can I find out what it is? Thanks Dan

Last post

Just checked the face and SOB. There is a star. Guess this one of those cams.
90692BB9-2351-4F28-BB87-A19AC40DD2A1.jpeg

10 Replies

348 Views

Last post by Dan Hatch
Mon Mar 27, 2023 10:21 am
FJ - Visiting One Of My Hobby Heroes On The Eve Of A Statewide Shutdown

Last post by George House « Mon Mar 27, 2023 10:14 am
Posted in General Discussion Forum
Replies: 3
by FreighTer Jim » Mon Mar 27, 2023 9:07 am » in General Discussion Forum

First post

Three years ago - on the eve of the beginning of
COVID-19 travel restrictions in Minnesota - I found
myself visiting a Living Legend in Minnesota.

I had to be out of the state in the next day
or so - I could not visit his farm.

This year - he will host another swap meet at his
Farm on April 22nd for Model A and T Hobbyists.

This Is What I...

Last post

Wonderful story and pictures. Thanks to both Bob and Jim for the good news. I very briefly considered buying the old Ford dealership in Lockhart when a new one was built. It began in 1926. It finally sold for $850 K. That’s why my consideration was ‘brief’.

3 Replies

245 Views

Last post by George House
Mon Mar 27, 2023 10:14 am
6Th Annual Model T- Model A- Prewar Swap. Minnesota.

Last post by BobP « Mon Mar 27, 2023 8:12 am
Posted in Classifieds - Parts
Replies: 5
by BobP » Sun Mar 05, 2023 2:58 pm » in Classifieds - Parts

First post

We are having our 6th annual Model T- Model A- prewar swap meet and car show at our farm Saturday, April 22, 2023 starting at 7AM. Free overnight primitive camping. Free setup, free admission. Rest room and lunch wagon on site. Location is 7525 County 12 Blvd, Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell, swap or look. Questions, Bob &...

Last post

bttttttttttttttt

5 Replies

540 Views

Last post by BobP
Mon Mar 27, 2023 8:12 am
What does this fit????

Last post by ThreePedalTapDancer « Mon Mar 27, 2023 5:13 am
Posted in General Discussion Forum
Replies: 3
by Dan Hatch » Sat Mar 25, 2023 11:53 am » in General Discussion Forum

First post

Anyone know what this ring gear and pinion fit.
11 tooth pinion 42 on ring gear. Shaft in pinion is tapered like a T. Looks to be same size as T. Any info would welcome. Thanks Dan
279F53CB-680E-4D36-84E6-EC85BB1B76B8.jpeg
3E91E493-D6C8-459A-9805-FA0EF0966B72.jpeg
65C7D40A-87DB-4F26-9710-02E0811A30FE.jpeg

Last post

26-28 Chevrolet I believe.

3 Replies

429 Views

Last post by ThreePedalTapDancer
Mon Mar 27, 2023 5:13 am
1947 Ford Tractor Governor

Last post by Flyingpiper59 « Sun Mar 26, 2023 11:58 pm
Posted in General Discussion Forum

by Flyingpiper59 » Sun Mar 26, 2023 11:58 pm » in General Discussion Forum

Forum Chums……
This is off topic….if not of interest or not allowed please remove…..two videos to follow from my bailiwick…..you folks have taught me so much about the Model T and my new venture….thought I’d share my area of a little knowledge……I love wrenching in all iterations!

Part 1

Part 2

0 Replies

155 Views

Last post by Flyingpiper59
Sun Mar 26, 2023 11:58 pm
26 cylinder head minimum thickness

Last post by ModelTWoods « Sun Mar 26, 2023 11:55 pm
Posted in General Discussion Forum
Replies: 10
by Dave1 » Mon Mar 13, 2023 1:23 pm » in General Discussion Forum

First post

Anyone know the maximum amount of material that can, or has been removed from the late model cyl head?

I am contemplating installing a set of 265 chev pistons into a T block to accomodate the chevy crankshaft I will be installing.
It seems the chevy pistons are a pretty close match for the chevy rods, this will require a bushing for the wrist...

Last post

A member of the Houston MTFCA club says he has shaved high heads .150 with success. Someone on this forum has posted that they have shaved low heads .125, with success. Either way, to see any compression gain, the engine would have to have high compression pistons.

10 Replies

470 Views

Last post by ModelTWoods
Sun Mar 26, 2023 11:55 pm
Early 26 Water Outlet and Fan Mount FS

Last post by RGould1910 « Sun Mar 26, 2023 11:41 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sun Mar 26, 2023 2:25 pm » in Classifieds - Parts

First post

Here is a nice unbroken early 26 fan mount. If you have a car that needs one of these you know how hard nice UNBROKEN ones are to find. $65.00 + shipping. Email me at address in pictures. Thanks Dan.
4534628B-870A-4833-8420-ED9C9E7A110C.jpeg
7BBBDA18-4338-43C0-99E4-79A19589C975.jpeg
8828DA20-9B7B-493B-B87D-9326FEEAF617.jpeg...

Last post

Email sent

1 Replies

201 Views

Last post by RGould1910
Sun Mar 26, 2023 11:41 pm
WTB: New Cam Shaft

Last post by ModelTWoods « Sun Mar 26, 2023 11:21 pm
Posted in Classifieds - Parts
Replies: 6
by steven.newman1910 » Sat Mar 25, 2023 5:53 pm » in Classifieds - Parts

First post

Looking for a new cam shaft. Preferably a stipe .250, but would consider a .280 if one is available. I called Chaffins to see if they had any of their new cams i stock but said they don't do those anymore and no regrinds on the shelf either.

Does anybody have something they would sell?

Last post

I'll be in Luray in May

Hi Rich,

Looks like this is a regrind from Chaffins. Am I correct?
Or is this one brand new?

Thanks!

Steven

Its definitely a regrind. Tag says .264 lift which Chaffins apparently sold as .270 lift.

6 Replies

409 Views

Last post by ModelTWoods
Sun Mar 26, 2023 11:21 pm
Leaking Radiator Petcock

Last post by Model T Ron « Sun Mar 26, 2023 11:09 pm
Posted in General Discussion Forum
Replies: 7
by Model T Ron » Sun Mar 26, 2023 3:30 pm » in General Discussion Forum

First post

I needed to drain my radiator and now that I refilled it the petcock is dripping. The car has an original radiator and the petcock seems loose. Any tricks to help with this or is it off to the radiator shop?

Last post

The easy answer is to fit another petcock. They are the same as those on the pan that are used to check the oil levels. Otherwise, follow Adrain's plan.

Not all Ford petcocks have a spring, washer and split pin to hold tension on the rotating piece. The early cars had a machined washer and a fancy set screw which was threaded into the end of the...

7 Replies

235 Views

Last post by Model T Ron
Sun Mar 26, 2023 11:09 pm
Kingston five ball updraft

Last post by Jonny Eriksson « Sun Mar 26, 2023 10:50 pm
Posted in Classifieds - Parts

by Jonny Eriksson » Sun Mar 26, 2023 10:50 pm » in Classifieds - Parts

A Kingston five ball with updraft and intake manifold $450 plus shipping.

0 Replies

192 Views

Last post by Jonny Eriksson
Sun Mar 26, 2023 10:50 pm
Driveshaft tube

Last post by Melba Nolan « Sun Mar 26, 2023 9:55 pm
Posted in Classifieds - Parts
Replies: 4
by Melba Nolan » Sat Nov 05, 2022 12:42 am » in Classifieds - Parts

First post

For sale: Driveshaft tube in good condition $100 plus shipping
20221104_154454.jpg 20221104_154330.jpg 20221104_154420.jpg 20221104_154439.jpg 20221104_154339.jpg

Last post

move to top

4 Replies

1009 Views

Last post by Melba Nolan
Sun Mar 26, 2023 9:55 pm

Search found 244 matches

Go to advanced search