MTFCA Forum

Saw on the National News here tonight a story regarding the California wildfires & there were some photos of Lake Elsinore in ashes ??? Quite sure that Mark resides there !

IMG_7983.jpeg IMG_7985.jpeg IMG_7991.jpeg IMG_8001.jpeg

I purchased this Rotary Valve cylinder head at a local auction several years ago. Since that time, I have been unable to locate any information on it. I thought I would share a few photos of it in the hopes that another forum member would recognize it or offer some suggestions on who I might contact for assistance in identifying it. It appears to...

Is the headlamp tubing the same material as fuel line?
Should I use it my headlamp tubing that’s surplus to make a new fuel line or does someone need it?

Does anyone have an idea where I may be able to procure this stud for the thumb nut on a Jno. Brown model 85 sidelight? It appears to be a #12-24 (.210 diameter) with a square neck. 20240911_113946.jpg 20240911_113952.jpg 20240911_113934.jpg

I am having some carb backfiring and wanted to see if anyone had insights before I start “trying” things to fix it.

Here is what I have: 26 engine,rajo BB head, Winfield SR down draft, AB distributor. Fuel is hand pump, set to 1.5 psi with an hidden regulator. Engine was built in the 70s, I rebuilt the Winfield and distributor this winter...

WTB RH quarter panel for a 1923-25 Roadster, If you might have the panel behind the door, this is what I am needing. Please let me know if anyone has one in their pile of T parts. Thanks...Mike

Looking for a stock size scat/dubats/NZ/whatever new crankshaft. Anyone hoarding? EMAIL me with a price if you do.

I am trying to source a vintage looking Magneto-type Coupler that has a 0.750 diameter, keyed-shaft bore on one end, -and a 0.500 keyed-shaft bore opening on the opposite side. At last resort I'll consider using a modern coupler, but if someone knows of a source to purchase one, I would appreciate it.

Thanks.

This photo has appeared on ebay, it shows women and men working on Model T's at what appears to be an emergency assembly line during or after the first world war.
Any one have an idea as to what is the story beind this? Possibly Model T Ford ambulances being rescued for reuse, what country might the soldiers be from?

Want to buy 26-27 Ford accessory Canadian rear bumpers, the split bumperetts. Can pick up at Hershey.
Can Bump.jpg

Possibly these pix were to promote the bead-breaker tool the gent is using ? I don’t recall seeing very many period photos of a tire repair in progress.
IMG_1585.jpeg

I recently pressed a set of pins out of a flywheel I was re-purposing. They looked pretty good so I cleaned them up and measured them. They are slightly tapered to the outer end. The worst one was .0025 down.
These are old originals with the small shoulder at the back so they don't come out.
If you were to reuse them in the absence of proper...

These photos were sent to me by a relative asking if I knew what the heck it was. I said I’d ask here. It looks like it converts a non demountable to a demountable rim. We were speculating that it might be used for a quick change for a flat but that’s just a wild guess. Anyone got any info on it?

Bosch mag and side drive mount. Has wear and tear missing gears and the fan mount up top can include a front cover for a replacement piece shaft has something brazed on the end . mag turns over I don't know if it works haven't tried. Would like to find a gen mount mag drive so I'm selling this. $450 shipped lower 48

It's September 6. Guess we'll get it rolling.
We had a terrible Spring.  We had to ask a tenant to leave who had issues paying their rent and when they left, their unit was trashed.  It took us close to 4 months to make it rentable again.  This made it so our first ride of the Summer took place today, Sept. 6.  After some gussying up, it was a...

Is this event still going on? Any idea on the date?

Can anyone date this photo for me?

IMG_5965.png

I have orders from my better half for a particular project. It needs a head high stand, so down to the T scap pile I went.

Just two components and I was done. That's a non starter flywheel for the base and a late driveshaft housing for the column. Two magnet retaining bolts were used to bolt the two pieces together. The flange is a perfect fit in...

Daisy was born on or about March 2nd 1914.
One thing that has been in my possession for decades is a newsprint from the LA Times saved (along with other vintage front page news by my Great Grandma Annie Elizabeth (my Model A named in her honor)). Anyway, it's been buried in a box until it came to mind recently and I dug it out...to find it was...

Nice original 1925 roadster. Good solid body, complete car. It’s been sitting 3-4 years, I have it running 3 months ago. This is a nice solid car. $8500.00 located in Colorado Springs. Kdmks AT att.net.
None of the other cars in the background are for sale, I can get more pictures.

Time again for Lang's Old Car Parts Calendar! Lang's Old Car Parts is accepting photos of your Model T for our annual calendar. Photos and information are due by Friday October 14th! High quality photos only (photos from phones usually do not work). When sending the photo, make sure it is downloaded in FULL SIZE. Newer phones can take good enough...

Hemmings used to have several companies available that you could purchase titles through but I have been searching the computer today and can't find a one. In Virginia it is almost impossible to get a title if one didn't come with the car. I only know of 3 ways, a garage can get title to a car that has been abandoned or left unpaid, you can get a...

I have some new transmission main shafts. Extra to me. Why mess with the old Ford shafts. I have not found one straight enough to use. I don’t think they were straight 100 years ago. These are. $195.00 each + shipping. Email me at address in pictures. Thanks Dan
IMG_3392.jpeg
IMG_3393.jpeg
IMG_3394.jpeg
IMG_0260.jpeg

IMG_1525.jpeg IMG_1515.jpeg IMG_1403.jpeg IMG_1169.jpeg

Item no longer available.

I have a set of new reproduction 23-25 one man top irons for sale. Never bin mounted on the car. These are the ones the dealers sold before they were discontinued in about 2019. Price $1,600.00 plus actual shipping. Prus, three three 0-77four-71three0. kprus@zoominternet.net

Living in Los Angeles I am looking for a great re-builder. Please don't mention H&H.

Have a 26-7 short block .060 over pistons, .020 under rods, .030 under mains, hardened seats, s.s steel valves, adjustable tappets, aluminum timing gear, pre hershey price 2000. at hershey it will be 2500. Tiffin Ohio 419-618-1025 Joe, Thanks!

For Sale model T keys as shown.
Number 55 is non script round top.
These are placed in numerical order starting with 51.
so missing three script keys; 55, 64, and 69.

$225 includes shipping to lower 48

T keys.jpg

Storage jacks one set of 3 on pair and a few singles some have issues 40$ each plus the ride

10 new 1909-1912 E & J Carbide Generator mounting brackets, excellent reproduction $130US delivered anywhere in USA and Canada.

Post your OCF 2024 Photos and Video links here!

This is not directed at anyone in particular. It seems that lately, there are lots of questions being asked here, with written descriptions only, and no pictures. Lots of us here have seen a lot of things, but none of us are mind readers. It's also more difficult to help the newbies, who may not yet know the proper names of various parts, or the...

I lost a latch handle on the road somewhere, luckily the nut was on the running board. Does anyone have an extra?
Thanks

Does anyone know if Kohnke Rebabbitting is still in operation? I’m suspecting that I have a few bent rods in a newly done engine and would like to have them all checked. Herm had done excellent work for me in the past and I do know that his son was continuing the business after his passing, but haven’t had any luck reaching him. Also, who else is...

Transporting parts from Canada to sell at Hershey, can it be done, are there import issues, fees, duties, taxes, etc.? I have the opportunity for someone from Canada to bring me some Model T parts to sell me at Hershey and save the cost of shipping, but I see potential issues at the border. Anyone done this recently and can share their experience?

On the fence about glyptal painting generator, starter housing insides before installing rebuilt field coils.

When did Ford change the design of the grease cups from the early style to the later style used until the end?

20221010_182207.jpg 20221010_182220.jpg

For sale: Longer style valve covers $20 each plus postage

For sale: Kingston Model L4 carb $75 plus postage

20220608_204720.jpg

20220719_195224.jpg 20220719_194438.jpg 20220719_194405.jpg

For sale: very heavy brass headlight rims. No cracks. $150 plus postage

For sale: new never used large Burner Cones. $20 each plus postage.

email: melbanolan@aol.com
text: 314-575-7115

for sale: outlet connection pipe, for water pump 10 3/4 $5 plus postage new

melbanolan@aol.com 314-575-7115

for sale: locking foot pedal for exhaust whistle $10 plus postage

pictures........melbanolan@aol.com or 314-575-7115

For sale: original metal firewall in good condition. alittle surface rust on bottom $50 plus shipping
20210905_131402.jpg

For Sale - listing for a friend
1920 Roadster - Near Lexington, MI. I have worked on this car and can attest that the description is correct. This is NOT a project car, it has been extensively restored and is ready to tour. The body is in excellent condition (9.5) as is the upholstery and top. The engine has been refreshed and the transmission...

Reminder that Horseless Carriage Club of Missouri will be having their 45th Annual Swap Meet and Car Show. gates open at 6:30 at the Fox Service Center 849 Jeffco Blvd. Arnold, Mo.

I recently decided to remove the windshield on my August 1924 Touring to tend to some rust and replace the rubber bits. As part of this, I will need to paint the cowl as well. I figured, removing the cowl should make the process of masking easier by eliminating it. Boy was I in for a surprise. Once I got a closer look, the top rail that goes from...

1 pair of hyatts both measure .498 evenly so they have some life left tight cages 68$ shipped lower 48

More will be availble as soon as I can process them

As the pictures show carburetor completely disassembled, cleaning all parts, new choke spring, polished and reseated needle, reconditioned spray needle, new mounting gasket. Carb only needs a float and bowl gasket, then it will be ready to install on your car. Asking $95 which includes FREE Shipping to any of the lower 48 contiguous states only....

IMG_5983.png I have a 1918 Model T Couplet removable post car for sale. It’s a very rare car that needs to be saved. There are less than 20 left in the world. No motor, but included are window frames, door latches, doors and truck lid, cowl light brackets, seat springs that were copied from an original car, upholstery cloth ( 9 1/2 yards), splash...

I'm shifting my newly rebuilt Ruckstell pretty well. But looking for experienced methods of shifting from Ruckstell High to Ford High. Advice?

IMG_7908.jpeg IMG_7907.jpeg IMG_7919.jpeg IMG_7911.jpeg

Looking to install my recently acquired pans.
Do they sit on the bottom rail of the chassis or underneath?
Any insight much appreciated.
Thanking all in advance!

As I was driving my Model N through the Greenfield Village, a nice young kid, (maybe 12?), asked if he could have a ride. I just couldn't at that moment but told him to find me later. It wasn't until the next day that my wife spotted him. I waived him over and offered a ride. (Thankfully, his parent was there to approve) As we rode around, he...

For sale Robe rail for rebuild the end are nice one got a big gouge froma saw or cut off wheel at some point t the brass hardware seems to be taped to it the pipe is so broken ill cut it off 100$ shipp lower 48 not sure what years used this specifically

Here is a pair of sidelamps which I believe are from an early 1915.

They are the same size as the later 1915 side lamps. They have the same lenses and the same glass rims as the regular side lamps.

The differences are as follows: the chimneys have vent holes on the bottom of the first upper tier, the fonts are larger, different shaped and...

We will be at Hershey again this year with a lot of parts for the various add on distributors that were used on the model T. Find us at C4N 31 -32

Tom

J. R. Irvin Mfg. Co. 220 McCarty St. Indianapolis, Indiana.
Manufacturers of aftermarket Ford model T bodies and detachable fore doors. IMG_7680.jpeg

13 14 carbide generator for parts of restoration complete but beat has rust issues along the bottom of the water tank and base of the unit. 200$ shipped in the lower 48

One aluminum step plate.
Comes with hardware.
Just install.

15.00 plus shipping.

Please text Brooks @ six zero 9,
9 two 0, 4 2 two zero.

Many thanks!

So today was the start of a long stretch of famous balmy, non-muggy Ohio days. So off 6 of us went to a place called Sorrowful Mother Shrine for a comfortable picnic tour. Jeff Swope, our youngest member of this clubs touring gang is handy with apps. He always has a recording of where we go. An app called Track My Journey. So this time along with...

I think this car could vie for the best Torpedo in the world. It's absolutely spectacular. Early 1911 Torpedo roadster, ground up restoration, equipped as it left the factory. Authentic in every way. Impeccable restoration completed and the owner died. It never saw the road. The gas tank is sparkly clean. Comes with a few spare parts. $35,000.00...

For Sale a good set of 26/27 running boards.
Ford Script both sizes ,Made in USA.

$175 plus shipping

Thanks,
Clay

26 running boards.jpg 26 running boards 2.jpg

If our '21 Touring doesn't sell in another week or two I want to install the new top we have. We've had the car almost 8 years. I have watched videos and read articles on how to. I will have some help available.

A mining memorabilia collector has this in their collection. I think this would be a great badge to have reproduced.
goldfield 1.jpg goldfield 2.jpg

I am getting close to the point where the rear axle is ready to go in so I am looking at other parts that need to be in place. I have a nice Muncie that I am using in this car. I have the proper connectors and the support, but I don’t have the hardware for mounting the support. The manual shows a couple of “U” bolts that go over the top of the...

I'm looking for a period tilt flat bed not box for a model TT truck, interested in just the bed assy. or a project truck if need be.
I would prefer the crank style elevation, not gravity style.
Thank you Russ.

I found this elsewhere on the www. It apparently is a top to convert a Touring into a closed sedan. I have never seen one, not even a picture before. Anybody else got one? Can anyone direct me to more pics & info on them?

By chance are there any members selling Model T parts at the Cowtown Farmers market in Pilesgrove, New Jersey?

Hello,
Got this rim with some common T rims. Anyone know the brand of this smooth inner 21 rim?

Thanks, Clay

21 rim.jpg 21 rim 2.jpg

Howdy,
Seeing clutch springs advertised in classified section brings a question to mind. What is the compression rate (lbs) in one inch?
Thank you

I'm looking for a replacement low speed drum and was looking for help in what to look for.
Cracks across the band and across the ribs I've seen on videos but what about the outer surface condition?
And what if it has been turned in the past?

Thanks

I sold Tim a starter and he filmed a little video of how it arrived and all the surprises I include for free!

Jeff

I am selling the parts storehouse of my dad and grandpa. As I get stuff out and sorted I will take pictures and list here.
First items are a rain topper for seventeen to twenty one goes at top of wood firewall $45
3 nice steering wheels with metal spyders and bakealike rims $39 each
double Flair tool with box $35
3 piece vacuum grip miniature...

For sale a new 6 volt Mitsubishi alternator!
Catalog price is$259+ tax and shipping
Mine is $200 plus shipping
Pm me if interested

Cleaning out some coffee cans and have multiple matched sets of the threaded Timken's available - clean & ready to grease - photos coming soon - $100 pair includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Does anyone have the instructions for a Schlaich Lock made for Motometers? The way they work is seemingly obvious but I am hunting for the original instructions just for reference.

Wanted 26-7 coupe driver side door latch pic of the passenger latch is the style I need bolts on the interior of the door. Door in second pic. Also looking for front door window regulators and exterior door handles Plenty of parts to trade

Wood door trim mostly coupe stuff 30$ each plus the ride ask any questions I can measure any of them if your interested.

Pair of nice used wire wheel Front Hubs 300$ plus the ride

I have 10 original 1909-10 hubcap for sale. Not perfect but still very good. $40 each. Plus shipping. Kdmks AT att.net.

KW switch. Works, key does not withdraw from switch. Fits Master Vibrator and 1913 coil box. Needs coil box front plate. $85 plus flat rate shipping.
USA only.

Accessory tire irons and wheel lug wrenches from a garage in Ashokan, NY. Also fits head bolts. Surface rust only. On has sticky surface from being taped. Rare, hard to find. $50 pair plus shipping. USA only.

Re-built 6 volt starter for sale. Bought in Carlisle as rebuilt and never used. I no longer have need for it and will sell it for what I paid. Will add picture later today. $275 plus shipping. USA only.

Every book and video I've seen mentions or shows 3 Driven Gear Sleeve Washers, but when I disassembled my transmission I found only 2 and one was fused to the shaft. Were there always 3 and one of mine got eaten?

What the shaft looks like now

I'm would say the shaft is unusable at this point with all the scoring

What's up with Rootlieb? I get an error when I try their site. Is it down, changed or non-existent?

Our chapter had a shop day today. We adjusted the timing and carburetor on a distributor equipped speedster, replaced a stripped exhaust nut on a 1915 Touring, replaced the fuel tank in another 1915 Touring and successfully recharged a magneto in a 1917 delivery truck using the Carnegie method. None of the projects caught fire so I’m calling it a...