MTFCA Forum

First off, I cannot believe this nice FORD script nickel plated barrel, Bridgeport tire pump is still here. Talk to me! As for the rest, take a good look. These are all original meters, not 1950s and later reproductions. The gargoyle is the only thing new. Glad to mix and match, separate from the display caps, etc. I am also glad to describe any...

What makes a loud POP that sends sparks flying? Sometimes it happens, and sometimes it doesn't, and I'm not aware of what I'm doing differently.

OK so my engine is in and the motor mounts are bolted as well as the front. My Radius Rod needs to go back about an inch. Someone recommended jacking up the rod and it should pop in. I tried and that didn't work. These are the same parts going back together. Is there a way to shift the front end back as well? I don't like to force things. Any...

Anyone have a Seng Steering Wheel that could let me know how to get the horn ring working? I'm pretty sure I have a missing part that is right below the wheel that contacts the horn ring.. There has to be a sliding part that contacts the ring on the wheel.

It's a pretty neat after market wheel. The anti-theft part works great. On and off with...

Any thoughts on whether a 2021 Ohio Jamboree of T's will take place???

So I have heard about a car, called a stuts bearcat, that is this?

Guess our national leaders didn't expect this. On Thursday, Darrell Scott, the father of Rachel Scott, a victim of the Columbine High School shootings in Littleton , Colorado , was invited to address the House Judiciary Committee's subcommittee. What he said to our national leaders during this special session of Congress was painfully truthful....

00 Tue Safety with Subtlety 1 the purchase.jpg

This will be a 10-part series with an an additional chapter each day, keeping within this thread. It's mostly about safety modifications made to my Model T. I hope you'll find it worthwhile or maybe just entertaining.

There are two primary levels of participation in the antique car hobby On one...

I had my transmission out about 15 years ago at which time I replaced all of the bushings, new bands and maybe clutch disks (can't remember). Anyway I took the cover off today to adjust bands and decided to just check things over. This is an improved T with the driving plate that fits inside the drum. The first thing I noticed was that the screws...

87C89E50-A5D2-41A1-82E7-730DAA9B8716.jpeg DB3C160F-064D-4ADC-ACF2-770B324B5831.jpeg C5185354-9A0B-41BA-BC72-30063B0DE4F2.jpeg 3F260728-9932-4572-8667-2A610E2339BD.jpeg

Amazing, quirky, Rube Goldbergish, here is one that people will remember. I believe Jay featured one of these in his amazing accessories posts. This example, I do not believe was ever mounted on a car. There is a bracket on Jays that was used to mount to a windshield frame. For a closed car or truck, that wouldn’t be needed. I’m thinking $850 for...

this is my home rebuilders special ... i re-babbitt and linebore the mainbearings in your COMPLETLY disassembled Model T motor block ... this is for standard configuration mainbearings , crankshafts and caps only ... the customer is responsible for determining the suitability of the motor block ,crankshaft , caps and bolts ... i recommend that the...

Well, I wonder what the pacifist side of Henry would think of this?

1.jpg

2.jpg

3.jpg

I planned to have the frame/axles/wheels blast cleaned and then brush paint them using Rust-Oleum primer and Rust-Oleum black gloss. However, I now am considering having them powder coated. I would appreciate members commenting on these two options.

I wired my 26TT according to Ron Patterson's diagram. It is 6v negative ground with a voltage regulator. It is not running yet but when I turn on the lights the ammeter pegs to the right (charge). What do I do?

What’s the best way to trailer a Tudor Sedan on a open trailer? Frontward or backwards?

Offered for sale is this 1913 Model T Touring. The body is a Rootlieb reproduction manufacture twenty-five years ago. The body is no longer being produced as the craftsman who built it passed away several years ago. The fenders, running boards, splash aprons, hood and hood former were also manufactured by Rootlieb. The radiator is original as are...

Sold, Thanks Dan. It’s heading out your direction. SaoLD. This is a really nice Chicago transmission. These are under, direct and overdrive and are very well thought of. Just check out Clayton Paddington schooling Jay Leno utube video. This one has beautiful gears, bearings, and no known issues. Comes with an original support bracket. I believe it...

No date or location on this one, but it's such a nice photo I reckoned you fellers would enjoy seeing it ! :D

Need good short block or source to rebuild my 1925 engine.

Did some horse trading with my dad. What's the wrench for? PXL_20210419_204315599.jpg PXL_20210419_204324515.jpg PXL_20210419_203337840.jpg PXL_20210419_203320977.jpg

I just bought a 1913 Model T and I am going to pick it up this weekend. I have a large enclosed trailer so the car will be well protected, but I want to make sure it does not move around inside the trailer. I only have hooks in the corners of the trailer so I was planning to run the straps around the axles of the car to hold it in place inside of...

Has any Forum member purchased this mirror?
If so, I'd like to know how well it works.
Is there something better out there for a 1913 Ford Touring?

Thank you,
Gene

For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...

i have several sets of -.020 and standard diameter re-conditioned Model T connecting rods ... these are from the same batch of old stock rods that i listed several weeks ago , these are obsolete inventory from a long ago closed auto parts store ... i do not know the re-builder , but the rods appear to be of very high quality ,they are X grooved...

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

ISO new or like new door hinge pins for my 26 coupe.
Thanks in advance.
920-808-three 38 one
Myersair@yahoo.com

So Angie just took her first ASVAB Test. All the kids take it in JROTC. She told me she was glad she had a mask on because she was laughing at the automotive section. They asked questions like Identifying what type of fluid under a car could be red? What tool was a feeler gauge (she had to pick) and what you use to clean up threads on a bolt? She...

Hello everyone, it’s been many years since I’ve been here....

My ‘24 touring car has been collecting dust for awhile, and I’m thinking about getting her back on the road for the summer. I’d like to get a new top for her, it’s looking kind of ratty.

Two questions:

Which kit is recommended, and is there anyone in the downstate NY area (Hudson...

Looking for well used aux brakes, need to fit a late rear end. Preferably inexpensive compared to new ones.

DSCN2852.JPG I have 2 buffalo wire wheels good shape (tire on one is 30 x 3 1/2 ) are these worth anything? they look good enough to use...look solid....need blasting to make really nice... DSCN2852.JPG

LAST ONE SOLD. We had these made for several years now, and recently lost yet another foundry. SO, no plans right now to do more. I had 3 left from the last batch and now down to the last one.raw aluminum casting, very well done. If you own or hope to own one of these great pre-model T Ford cars, it would be smart to snag this. The originals often...

I have a good friend that asked me to help him get a vehicle home. He is 79 years old in body but a kid at heart. He has helped my many times at a moments notice including helping with my new shop. I said yes before I knew what or where. When he said we were taking the dozer to get to it and get it out of the woods I was all in. Then he tells me...

Is any shop project ever really done ? Nope.Still got to install more floor tie downs and a winch and mount for it.
BUT so you folks won't think I have curled up in a Lazy Boy and become a key board Curmudgen, here is what I have been working on for hauling the T pickup.
I built this from scratch. I had the basic frame put together,no ramp or...

A well made set of rear axle bearings. Looks like everything needed here. Short on good Hyatt’s ? Here ya go. $260 OBO ppd to your door. ( check the catalog price). Tmorsher@icloud.com to reach me. Thanks! 1462A9D7-F832-4550-BC67-9EFE34280F90.jpeg

I have this model T era chassis for sale. It will make a dandy chassis or can be easily modified to suit your needs. Shown is some forged side bed irons, I believe I have another set just like this, so 4 total, I’d be glad to include some T radius rods, extra side T frame channels, and even a decent front axle, if desired. I love the repurpose of...

For anyone who has stopped at Pioneer Village in Minden, Nebraska, you may have seen this custom bodied Model K:

55C9FC62-6C3A-4D17-8654-150A4F10EEAE.jpeg

91CD3606-2183-474D-846D-75F974DAB899.jpeg

This Model K has a history back to the 1950's. It was owned by Nelson Hollywood, a well known collector at the time:...

SDC18609.JPG SDC18607.JPG For Sale Nice Old Ignition Switch with Two Number 73 keys and amp meter asking $80.00 with free shipping to U.S.A call Matt 503-824-2681

Wondering if anyone from Georgia will be attending the Luray swap next month. As luck would have it, that is the weekend my in-laws are coming to visit so I can't make it.

I am looking for 3 stock wire wheels in REALLY good condition for my '26 pickup - I picked up 2 this weekend and they of course wound up being for Model A's. (If someone in...

I still have still not found any other old car owners in Klamath Falls area but that has not stopped me from having little tours of my own. A couple of weekends ago I set out to circumnavigate Stukel Mountain by Model T. Stukel towers some 2000' above the Klamath Basin floor and can be seen anywhere in the area. The picture was taken from my front...

Here is a dandy. An original model T era bed, to convert your runabout( or cut-off touring) into a pickemup truck. It’s the real deal, note the shape of where it tucks up against the body. Amazing condition, beautiful solid wood and iron hardware. I think $650 is a fair deal, but I’m all ears. I’m not using it, and would like to see it go to a...

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders running engine and a workable transmission. I would prefer 1916 and above but would consider older. Also would like to find one in the upper midwest.

WTB steering arm with ball socket attachment for 26 TT.

1931 Ford Model A

-Rebuilt transmission, rebuilt rear-end, good brakes
-Turn signals and brake lights work well
-Small paint flaw on passenger’s front fender and on engine hood (undetectable from 10’ away)
-Speedometer does not work

Handles great, rides smooth, cruises comfortably at 40-45mph, just about as cute as it gets

Message or email for...

I drive my T's a lot. Yesterday. after a short drive, I left my 1915 touring idling running on magneto while I ran in the house for no more than two minutes. When I came out, smoke was pouring out of the coil box. I shut her down and removed the coil box lid and found the number one coil had tar bubbling out of it. I'm guessing it shorted out? I...

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders, running engine and workable transmission. I would prefer 1916 or newer but would consider older. Also would like to find one in the upper midwest.

This may seem like an OT thread at the beginning but it is Model T related at the end.

When I was in the Marines, in the Fleet Marine Force, we spent a lot of evening time polishing brass belt buckles for the next morning’s inspection. In 1974, I was selected for Embassy duty, AKA MSG Duty (Marine Security Guard). Basically, we were on loan to...

JUNE 19TH MODEL T HOMECOMING IN RICHMOND, IN. TOURS, CAR SHOW, SWAP MEET, SEMINARS, AND MORE. REGISTER TODAY TO RESERVE YOUR SWAP MEET SPACE!

These are just about 100 years old now. We find them, we buy them, we take them apart, clean,oil,regulate. We polish or nickel plate the case and stem. Choice of 5 different faces. We assemble in your choice of dull nickel, then polished, or in polished brass. New clear lens, delivered to your door, $85 for brass case , $95 for nickel case.
A...

Good morning everyone. Hope you all are doing well. This week’s Sunday Swap Meet offerings are all good used original items. Description and prices are as indicated below. In most cases, USPO Flat Rate shipping will be an additional $8.50, unless stated otherwise. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951)...

I'm taking off the trunk and mounting the pickup box on my 1925 roadster. Does anyone have instructions, sketches, or images so I do it right?

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $15 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...

Evening all,

I have here a pair (left and right) set of roadster rear fender irons. These look a bit shorter than I those for my 13. I have the measurements in photos. I dont know if they were modified, this is how I got them.

Asking $90 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and...

Evening all,

Here is a single rear roadster fender iron for the left side. In nice shape!

Asking $45 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on pickup is...

I have a friend looking for a 23 Disteel LOCK RING rim with a Rivet Latch, for use with straight sided 30x3 1/2, 31x4 NON Clincher tires. George Hand

FS Early Side light brackets, they are new and Excellent Reproduction. Asking $50 or BO for the pair plus shipping. PayPal prefered. Thank you MTFCA.
light braket.JPG light braket 2.JPG

A currently hot Jelf topic regarding restoration and originality contains an observation by Tim Juhl that has set me thinking. He said:

“Let us not forget that the Model T was one of the most customized cars of it's time.... often beginning soon after it rolled out of the factory. I consider my car's equipment to be part of it's history and have...

FS complete Ford Faithful Ouside Oiler Kit. This is a reproduction of the original “Ford Faithful Oiling System” that was offered to Model T owners from 1911 through the twenties. No modifications to your original engine are needed, no holes need to be drilled. I used one time only and decided to go with different path.

Comming with:
“Ford...

One headlight for sale. Asking 205.00 plus shipping IMG_20210419_082945580.jpg IMG_20210419_083001841.jpg IMG_20210419_083051855.jpg IMG_20210419_083027502.jpg IMG_20210419_083041560.jpg

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

So I notice that my early steering bracket does not align with a 26-27 frame holes. Will a 26-27 Steering Bracket 3539DU work for a early steering column?

WTB 1927 Closed Closed Car 419 447 5254

Looking to buy a physical copy of the Sept/Oct 1976 The Vintage Ford (Volume 11 #5). I believe it had an article in it which discussed my grandpa’s crash in a 1913 Model T during the Kingdom of Calloway tour.

Darin

DC45CDF4-0356-4918-BCEE-9B0F6D05581B.jpeg 5D35D9DD-6A83-4058-815C-81A8A669FF36.jpeg 2D77F1CA-EF12-4909-8656-886E84584113.jpeg 8254C029-7EBB-4353-889A-E8F40E8C4F74.jpeg

Photograph notes the location is Rexburg, Idaho, no date, but indicates the car may have been part of a tour or auto parade .

Set of 3 cans with carrier to mount on running board, will need repair during restoration. $275 plus domestic shipping.

Does this ring anyone’s bell? All brass, came with a bunch of carb parts. To me it looks like some sort of primitive carb, 6847BFF0-6921-4013-B722-8301764ABEEF.jpeg 3B857BC2-8CA9-4B48-AECE-2FF26DDE88CF.jpeg C72A725F-343E-4E84-9C7F-7EBD885BD520.jpeg D6C776E9-7A17-4DC4-BCBE-2AB9FFEAF250.jpeg

Anyone know what this hub cap fits? Painted what looks OD Green. Maybe 40’s military?
E4F5AD0C-CA2A-48C9-B106-8AE42D53BD3E.jpeg
5F968BE1-1868-4815-8704-A868EDA0A4EA.jpeg

Looks like drip painted, coating is thick. Any idea? Thanks Dan

Well-constructed period aftermarket side view mirror that clamps to the window frame.
$100 plus $15 shipping anywhere in the 48 states.

Thanks for looking.
Gene Emering

memering@embarqmail.com

23 Roadster..Does the coil box lid secure the coils in any way? I don't have a lid for mine, and had a coil loose connection at the bottom contact. That made me wonder if a lid would have prevented this from happening. That being said, does anyone have a slant style coil box lid for a 23 roadster? Thanks..Tommy.

The ruckstell in my 25 Tudor is stuck. Not sure, but I think it’s stuck in high. I can’t move the shifter forward or backwards. What should I do first? Is there a easy fix for this?

She’s in real nice condition. Restoration isn’t that old. Has a ruckstell rear end and rear juice brakes. The water pump and radiator hoses has been changed since the engine picture. Also has newly rebuilt coils and carburetor installed.Runs and drives as it should. $9,500

884E0325-85FD-47CC-8C4E-D5A663448377.jpeg...

We all sometimes think of the car I should have kept and not sold. I have several in mind, 1965 Mustand convert, the 1932 B400, The 1909 right hand drive Model T Roadster and perhaps a few more (The 1918 Chev hardtop coupe is one.) What car should you have kept and not sold?

Here are a very impressive and large pair of Bleriot Sidelamps from the pre-1915 era. These lamps are missing their lower burners and oil fonts but otherwise appear complete. As they sit, they measure about 13 1/2 in overall height. The main lamp bodies measure about 6 square and the lenses measure about 5 square. They are made to be used as oil...

Joe Lappin Jr passed away this week at 91.

Most don’t know him as he was more regional/local.

How was a hero. Out of nowhere at age 80, Joe decided he wanted to own and drive a Model T for the first time! And he did!

He found a restoration in progress in an estate, bought it and proceeded to have the restoration done-his way.

It was a 27...

Wanted
Still looking for all 6 of these both sides
It’s what the glass sits in. 4 in the doors and 2 in the rear side windows.

Wanted 1 26-27 Fordor garnish mould
The one that has the steps in it to hold up the glass. This is the rear side window. As per photos

Wanted
26-27 Fordor rear side window holders as per pictures

Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded

Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...

Here is a nice pair of 14 windshield braces. Been blasted and primed. Not pitted, should make a nice set. $120.00 + shipping. Email me at address in pictures. Thanks Dan
0E8BBB97-39D3-4F35-9273-1C1CE35C0B53.jpeg
57A77D32-3F2C-4757-AF78-5F6C64321F4B.jpeg
83CBE93A-5531-4E83-903B-639254C6B98D.jpeg
0CB14FAF-D95B-4882-A7F0-903FB4D19F3B.jpeg

Here is a nice pair of 14 windshield hinges. Have been taken apart, blasted, primed and assembled. Some pitting on back of one, see pictures. All parts are there except the split pins to lock nuts. Nobody is reproducing these that I know of. $85.00 + shipping. Email me at address in pictures. Thanks Dan
A45BD5C8-3F10-4B38-BE7B-4F09C022C845.jpeg...

1909-25 Small Drum Rocky Mountain Brake setup. All that is included is shown in the pictures. I DO NOT have the brake drums.

I bought this set about nine months ago for my speedster. It was advertised as a large drum set. Unfortunately, I waited until now to try and install them and I realized that they are actually for a small drum axle and are...