MTFCA Forum

Looking for 11-13 tea cup pan. Either one will do.

Thanks Tom

ORIGINAL NON FORD KEY BOARD $25.00 PLUS SHIPPING SAYS KEYS TO FIT FORDS

SOLD

Wasn’t there a meeting last weekend? Any reports or photos?

Andy

During our club's tech session last night, Joe Bell showed us a rear wheel with an interesting hub on it. As you can see it's got six flats on it that are also pretty well beat to crap. Apparently someone had trouble getting the wheel off the axle. The felloe clamps do indicate it's a Hayes wheel FWIW. Anyone seen one like it? Aftermarket hub...

Hi All,

Well I am slowly progressing, crank is now good as are the con rods all at 1.5 thou clearance with no binding. They were a pig to balance, I ended up doing twenty measurements and averaging…

So I thought I would check my pistons. These are new cam ground 0.20 oversize. I told the machine shop that bored the block to go with 0.0035...

Why can't I post photos that are taken with my phone in vertical position?

Hello,
Broke out the t for the first time and noticed a flow of grease and oil out of the u joint. It was grease followed shortly after by a mix of oil. I believe the grease melted and flowed out. What grease should be used in the u joint?
Regards,
Matthew

Pictures of other cars in the estate auction

I will be upholstering my touring car this spring and want to know if anyone has any photos of the job anyone else has done. I got a kit from Classtique & it is beautiful! Of course I don’t want to mess it up in any way, so just trying to do some homework before tackling the job. Any photos and comments appreciated!

$300. Castle rock, Washington CA1B8C8C-F400-4001-BB73-70F6045CA76E.jpeg AD3ACC50-D677-48C8-98FE-8F9DED06C696.jpeg

For some time now one rear wheel was talking to me as we rounded corners. It had already had a farm fix with metal wedges driven between spokes. I had tightened the hub bolts and re-peened the bolts, but looseness in the tenons could not be fixed. The difficulty was finding a sound replacement with the same weathered look. In the end I gave up...

Anyone bringing good usable ‘22 fenders to Luray this year? I may be in the market if price and my wallet can come to terms.

STEVENS T-181 THREAD CHASING TOOL, MODEL T HUB, RARE $1,000.00 STEVENS T-181.jpg

THIS IS THE MOST VALUABLE TOOL I HAVE IN MY SHOP. IT WILL STRAIGHTEN ANYTHING. CAMSHAFTS, CRANKSHAFTS, DRIVE SHAFTS, FRONT AXLES, REAR AXLES. , REAR AXLE HOUSINGS. I WOULD NOT SELL IT IF I WASN'T SO OLD. $6.000.00 951-735-4791 DSC0433 PRESS.JPG

DIXIE FRONT END AND REAR END REBUILDING STAND. THIS STAND IS BETTER THAN THE KR WILSON AS IT IS MORE FLEXABLE $2,000
KR WILSON MODEL T & A ENGINE STAND WITH TOOL TRAY $1,800
KR WILSON MODEL T & A ENGINE STAND WITH TOOL TRAY AND ROLLER BASE $2,500
PAN STRAIGHTENING STAND $2,000 SOLD
TRANSMISSION BALANCING STAND $800
KR WILSON COMBINATION MACHINE...

GLOVER E. RUCKSTELL AND THE RUCKSTELL AXLE RETAIL PRICE $34.95 GET YOUR COPY WHILE THE SUPPLY LASTS FOR HALF PRICE $22.50 POSTAGE PAID, FOREIGN SHIPPING AT COST
951-735-4791 1939 S. MAIN ST. CORONA, CAL 92882
RUCKSTELL BOOK.docx BOOK_ADS.pdf

I’ve heard that a Voltage Regulator (cutout look alike) is smarter than the original generator cutouts. How is the generator third brush adjusted when a VR is used…or does it even matter?

Greetings All!! Get ready for a wonderful and rewarding Tulare Swap Meet at the Tulare County Fair Grounds on April 14-15 2023. Move-in day is April 13 from 9:00am to 6:00pm. This year we have a new and, (hopefully), permanent venue. After two years at the Agri-Center, we moved to the Fair Grounds. This will be a Pre-War ONLY event this year, much...

The Brass Era, 6 Day, 2023 Golden Gate Tour will start on Sunday evening, May 28, 2023 at the Mill Valley Travelodge for 4 nights. Call (415) 569-3948 for reservations (no group block). Make reservations now if you plan to attend!

Then, we progress to the Creekside Inn - Russian River, on Thursday, June 1 for two more nights. Call 707-869-3623...

Stromberg Hot Spot Manifolds with the correct and original hot spot control valve. Both manifolds and control valve are in good shape. Includes a copy of Stan Howes' OF and Hot Spot instruction manual. $350.00+$40.00 UPS shipping. Check or money order. Email me through this site if interested or have any questions. H1.jpg H2.jpg H3.jpg H4.jpg

Going through some more original parts I ran across these odd and large car windshield hinges one is brass and steel the other all steel, anyone have any ideas? Bob

The dise brakes are sold thank you mtfca

The clamp-on swivel bracket on my 1915 didn't want to stay put. So I bought a #2696B spindle arm, the one with a hole in it for a swivel bracket. I thought it would be pretty simple to make a bracket that would take a bolt through the hole and remain solidly in place. But it turns out the hole is tapered. I expect I can make a tapered part that...

I have sent rocky mtn brake an email with not reply
Just need afew small things for TT brake setup

Hi guy's
I'm putting together a rear for a upcoming project and found out the axle is a pre 1918. This has thrown a monkey wrench in my plans
on several points. First using the outside seals I prepurchased is out of the question. Fortunately Az Terry has a pair of early 2510 caps.
The other issue is there dosen't seem to be enough room for a...

9BD84D44-26F8-4A00-8BE0-F5B1846E5B7A.jpeg BB8D0C38-7141-477C-B076-2C7AF05B465B.jpeg 5CE226ED-95F4-4D74-ADA7-A16A330BEB4D.jpeg 7DD4C423-8693-4A98-88D1-FE62CC12F65B.jpeg

Everything you need to turn your standard T chassis into a speedster . small drum Ruckstell rear end , shifter shaft and gear shaft handle used but in good condition , I boult it from Mark Chaffin . aluminum Warford with shortened radius rods and drive shaft rebuilt by Henry K Lee . He is the best . steering column with lower gear box , coupler ,...

For Sale: Model T Touring, older restoration $22,500.00

I'm looking for some input and advice regarding how realistic an idea I have is.

Here is a little background information: I'm looking at retiring in about 5 years and we'll probably be downsizing shortly thereafter (or so I've been told...). My main hobbies have been vintage and antique snowmobiles as well as some old tractors & a few old cars &...

Learned something new today, evidently there is a longer than the normal rear spring clamp (U bolt) and I need to find a pair of the long ones for my 1927 Touring. Let me know if you have 1 or 2 your willing to part with
Picture from an old post

for sale : set of Townsend auto. cast aluminum connecting rods ... these are designed for use in fitting Model A crankshaft into Model T motor block ... the machining instructions are included ... machining will require lathe and milling machine work ... price is $150 + $17.10 flat rate postage in lower 48 states ... actual postage outside this...

I have a set of Birdhaven wood wheel sure stop disc brakes . I bought them new 1125 .00 will sell for 850.00 I can send pictures from my phone to your phone . Perry 512 234 0243 .

...I’ve recently had the good fortune to acquire most of the correct ‘3 bolt’ muffler for my 1914 runabout. Thankfully, the center and middle ORIGINAL baffles are still in good shape as is the tail pipe. However I had to order the external muffler shell from one of our suppliers. Therein lies my problem: The cast iron muffler diameters are...

Nice 1912 Wisconsin license plate, $150 plus shipping.
4 Ball Kingston Carburetor. Ran extremely well and idled like a dream on my 1915 T then it took a dump and started leaking fuel, I’m sure a needle valve and seat is needed, $250. plus shipping. I’ve got the correct carburetor for my T now so this one is available....

Nice round gas tank 1913-1920 $225
Free delivery to Portland Swap Meet this weekend.

20230328_110918.jpg

Stewart Model C, correct for 1913 in very nice condition. Untested, but drum turns when input is turned. $150.

Rebuilt swivel, 2-1/2:1 Rebuilt, very nice. $275

Price is firm, selling for widow.

Free delivery to the Portland Swap Meet this coming weekend.
20230328_111022.jpg

Here I have a watts clutch set up for sale. This includes the four thick plates and the one thin one as well as the special high pressure spring required for this type of clutch. These have not been available for a number of years. I removed the clutch from a rebuilt transmission that had never been used. It's in New condition with some...

What are these wire springs and where do I get new ones?

This was a labor of love building from a scrap pile at my Dads in Montana. Over 20 years of collecting parts, multiple design changes until I was pleased. It is a fun one for sure.

ENGINE:
-0.030 bores, standard topped pistons
-Dunn weighted EE crank with 0.010/0.010 on mains and rods (dippers installed on rods)
-Stainless Steel valves with hard...

I am looking for an nos or unrestored left front fender for a 1923 low cowl touring. I am finishing an unrestored car and want everything to match.Thanks

I just received a 1913 Speedster. Seems to be an incredible build, everything looks new, but zero documentation - I will be asking a lot of questions. I am mostly an old car guy, Packard, Pierce, Thomas, Napier, Cadillac. I recognize that Model T, I have several. It is a very tough car, but unique in many aspects. I have studied the history and...

Where can I find the list of Model T parts suppliers that used to be on the website?

Hello. I'm a new member and thought I'd say hello. I have just bought my first Model T (1923 pickup conversion). I'm looking forward to learning from people on this site.

I want to post photos. Can someone guide me thru the procedure? I also need to know how to resize photos.

model T roadster.JPG Model T mother in law seat roadster.JPG

This aluminum hogshead with lettered pedals will need some repair where the last hole closest to the block is broken.
$75 Free delivery to Portland Swap Meet this coming weekend.
20230328_110846.jpg

This is a reproduction carb made be the late Ernie Brown of Antlers, OK. Ernie was a top notch pattern maker and machinist. He did first class work as you can see. Ernie reproduced the 1909-11 Kingston 5 ball, 1910, 1911 and 1912 Holley carbs. There are many of Ernie’s carbs on running cars today and many of the owners have no idea that he made...

Are these two attached images of a Speedster Model T? Looks like my great granduncle might have raced his in California. I'm hoping to uncover the exact year and model variety of this particular car. Thanks for any help!

April 13-15, setup day is April 13. New location this year, Tulare County Fairgrounds. This is traditionally a great swap meet! See you there.

For Sale is a NOS gold plated Stromberg OF. Complete beautiful carb. $800.00. Kdmks AT att.net.

These are images generated by Artificial Intelligence on the Stable Diffusion website.

You type in a description (eg Model T Snowmobile) and hit Generate Image.

I wonder if anyone recognises the photos they are based on?

Stable Diffusion 7.jpg
Stable Diffusion 6.jpg
Stable Diffusion 5.jpg
Stable Diffusion 4.jpg
Stable Diffusion...

I have a 24 coupe and think i should get the rocky mountain brakes. I dont care if i die but it would be a shame to hurt that Beautiful car. Where do i start? Langs? Are they hard to install? And is it better to get the petal rather than welding on a tab yourself?

I used to post pictures but now a yellow triangle comes up, what am I doing wrong? Thanks

We are in the planning stages of putting together a model T tour in Eastern Europe, with the antique automobile and model T club of Hungary, and the caretakers of the Jozsef Galamb museum in September of 2024.
Gathering information to find out if anyone would be interested in a 15 day tour that includes Budapest and Vienna with your own model T....

Hoping to find a carbide generator appropriate for a mostly original car with a 50 year old paint job. Must be excellent and complete.

For sale is a pretty nice 7 rivet oil pan. It has the correct removable bottom and 1 piece retainer. Good solid pan. $1500.00 plus shipping. kdmks AT att.net.

In the thread Who's that in the photo? Alan invited me to post a photo of him on a visit to us here in South Australia. Before I could work out just which photo he was referring to, the news came that his five year fight against leukemia had taken its toll, and he passed just after his 70th birthday

Alan had restored a 1926 T roadster pickup that...

Storyful 3-27-23 (On Yahoo News today)
Headline: Tire Shoots Off Truck and Flips Car on Los Angeles Freeway

The front left wheel came off a pickup on the freeway just ahead of a Kia SUV. The Kia went over the rolling wheel and was launched into the air, flipped, and came down on its top, then rolled and landed on its wheels. As the Kia slid to a...

Limited quantity of NOS Kingston coil points.
$7.50 per set.
Free Delivery to the Portland Swap Meet this coming weekend.

What fixtures do these reamers use

Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg

WTB.
I need to match this door handle on my Dad's Street rod. No idea what it really goes to. Anyone help with identifying or have this handle.
Brian Dowell 586 864 5110

Nice pair of 1913 Wisconsin license plates. $300.00 plus shipping. Kdmks AT att.net.

Whis is making the finger joint box for a repop KW Coil?
Thank you
Jon Crane
cranejon@hotmail.com

Here is a 26/27 amp meter. Looks like an original, but I am not sure. Needle moves, don’t know if it works. $25.00. Email me at address in pictures. Thanks Dan.
339BEADE-64FF-41AA-BA80-F1775EA1443A.jpeg
F13962B9-E4A6-4468-B6BD-DF5C07DA0A12.jpeg
80B89D7E-7F36-4C5D-9CCC-8D12F7CC95E3.jpeg

Early switch panel. Has lock tumbler in, key 55. But does not turn. No switch parts. Has an amp meter, don’t know condition. Needle does move. $20.00 + shipping. Email me at address in pictures. Thanks Dan.
00147A12-0BB5-4D8B-B28A-BD6007ED9848.jpeg
C69B8233-77B5-433A-A18F-1943ED243095.jpeg
2F6D2D44-50B1-49FD-97A9-D3E3FAD901C1.jpeg

Here are some 3420 low speed adjusting screw lock nuts. They are NOS. $2.50 each + shipping. Email me at address in pictures. Thanks Dan
678F7B03-52B7-47D5-A937-DC3361E6AC98.jpeg
2C7F4E1C-8724-4945-A34E-6179FC149B8F.jpeg

These plates are in excellent near new shape, in primmer, and just need to be painted the proper colors for the year. I checked them out with California Department of Motor Vehicles a while back and they were clear in the system to register on your 1924 California year of make vehicle. Asking $95 plus postage.
1924 plates 1.jpg 1924 plates 2.jpg...

We are having our 6th annual Model T- Model A - prewar swap meet and car show at our farm Saturday April 22, 2023 stating at 7AM. Free overnight primitive camping. Free setup, free admission. Restroom and lunch wagon on site. Location is 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell or look. Questions, call 507 458...

At work.JPG

for sale ... reproduction quick bolt set for models A and T Ford main bearings ... these are made from grade 8 bolt stock and 1045 steel ...all US materials and manufactured by me , here in USA ... introductory price of $250 plus $15 postage in lower 48 states ,includes the 6 bolts , nuts and quick keepers for ends ... i will add photos this...

Offered here is a pair of front accessory Hayes wire wheels. They are the 30 x 3.5 size. The outside rims are in great condition. One is missing the front spokes. These accept regular 30 x 3.5 inch demountable rims and fit directly to model T spindles using regular bearings.

Asking $400 plus shipping for the pair. Thanks!

This is a really nice original and complete Hempy Cooper line boring jig from the early 1920s for Model T blocks. It is complete with original shaft, gears and cutters. Great unit. Asking $500 plus shipping.

Tired of messy timer maintenance every 500 Miles? Surging, jerking, missing....

An Ideal Timer is completely maintenance Free and direct drop in replacement for the stock mechanical timer. Start on battery and run on Magneto, the I-Timer is immune to timing cover misalignment and provides reliable coil activation precisely synchronized with...

I’m selling one of my Mercury front axles. Good condition and with good threads.
$3000 plus shipping. Located in Sweden.

WTB a jack like the black one in the pic.4199376284

I’ve got what may be the last new Berg’s radiator, that I bought from him last winter just as he was shutting down the business. The box arrived, I peeked inside and put it away til needed. Well, opened it up today to install on my ‘26 RPU and saw that the upper hose neck is very different than all of my other radiators. Not only does it take a...

Being on the road it is essential to 
do preventative maintenance on my
enclosed aluminum car hauler trailer.

If you trailer your Model T or other vehicle
this is something you might be interested in.

I usually stop at Johnson RV Surplus
because it is right off the I-80 turnpike 
just east of Elkhart, Indiana:

@ 

But that is not always...

1913 Hanson County fairboosters.JPG

I wish I knew how to zoom in on the radiators.

I had to buy a new safe. The old one was one I bought from an S&L that moved to a new location and this one had been used for the cashiers drawer storage. The hinges were so worn that I was having great difficulty closing the door. while cleaning out the safe there in the back corner in an old Yuban coffee can I found some of my old coins. I never...

I have several complete Model T chassis' available for purchase. All late model years. $500 to $1500. Come take a look. Cash and carry. Located at the garage in Lake Elsinore, CA. Mark Chaffin (951) 805-0928

Time to get some of the shop floor space cleared up. I have many complete engines (1917-1927) and several Ton Truck Ruckstell rear Axles with outside brakes that need to find new homes. Come take a look $200 each. Cash and carry. Located at the garage in Lake Elsinore, CA. No shipping. Mark Chaffin (951) 805-0928

So I want to make sure I get the layering correct. Got my kit from Classtique ( a very well made kit!!). For a 26 touring. Starting from the vinyl to the springs for the front seat back.

1. Vinyl this has a layer of cotton and then burlap secured with the buttons that are on the rear of the seat.

2. Next 2 layers of cotton that was marked...

I looked underneath the truck today and discovered I had a bad seal on my differential.

bad seal.jpg

This is a really great, original book. My Auto Book: Indispensable to the Motorist is a first edition with a 1908 copyright date and written by The Outing Publishing Company. This hardcover book measures about 7 1/2 by 5 and has about 200 pages. It is a log book where motorist would write the date of each trip, the names of those who attended,...

Looking to buy top irons square type for my son’s new to him 22 roadster. Trying to find a set to match a patina car. They are the two man variety. New would be acceptable if you purchased a set and have changed direction. Mark Eyre, Email meyre14t@yahoo.com.

I am looking for pictures of the seat back upholstery on a 19 roadster. I am especially interested in the area of the arm rests and where the body dips down from the top bow saddle bracket to the arm rest. I want to know how close the upholstery follows the body contour. Inside and outside views with the top up would be great. If anyone has a...