MTFCA Forum

I just bought a 1913 Model T and I am going to pick it up this weekend. I have a large enclosed trailer so the car will be well protected, but I want to make sure it does not move around inside the trailer. I only have hooks in the corners of the trailer so I was planning to run the straps around the axles of the car to hold it in place inside of...

I drive my T's a lot. Yesterday. after a short drive, I left my 1915 touring idling running on magneto while I ran in the house for no more than two minutes. When I came out, smoke was pouring out of the coil box. I shut her down and removed the coil box lid and found the number one coil had tar bubbling out of it. I'm guessing it shorted out? I...

I still have still not found any other old car owners in Klamath Falls area but that has not stopped me from having little tours of my own. A couple of weekends ago I set out to circumnavigate Stukel Mountain by Model T. Stukel towers some 2000' above the Klamath Basin floor and can be seen anywhere in the area. The picture was taken from my front...

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders running engine and a workable transmission. I would prefer 1916 and above but would consider older. Also would like to find one in the upper midwest.

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders, running engine and workable transmission. I would prefer 1916 or newer but would consider older. Also would like to find one in the upper midwest.

I am in the process of rebuilding the engine in my 26 coupe. What are your opinions on witch cam and timing gear set up, deliver the best all around performance for touring and cross country driving?

So I have heard about a car, called a stuts bearcat, that is this?

This may seem like an OT thread at the beginning but it is Model T related at the end.

When I was in the Marines, in the Fleet Marine Force, we spent a lot of evening time polishing brass belt buckles for the next morning’s inspection. In 1974, I was selected for Embassy duty, AKA MSG Duty (Marine Security Guard). Basically, we were on loan to...

JUNE 19TH MODEL T HOMECOMING IN RICHMOND, IN. TOURS, CAR SHOW, SWAP MEET, SEMINARS, AND MORE. REGISTER TODAY TO RESERVE YOUR SWAP MEET SPACE!

I planned to have the frame/axles/wheels blast cleaned and then brush paint them using Rust-Oleum primer and Rust-Oleum black gloss. However, I now am considering having them powder coated. I would appreciate members commenting on these two options.

These are just about 100 years old now. We find them, we buy them, we take them apart, clean,oil,regulate. We polish or nickel plate the case and stem. Choice of 5 different faces. We assemble in your choice of dull nickel, then polished, or in polished brass. New clear lens, delivered to your door, $85 for brass case , $95 for nickel case.
A...

Offered for sale is this 1913 Model T Touring. The body is a Rootlieb reproduction manufacture twenty-five years ago. The body is no longer being produced as the craftsman who built it passed away several years ago. The fenders, running boards, splash aprons, hood and hood former were also manufactured by Rootlieb. The radiator is original as are...

Good morning everyone. Hope you all are doing well. This week’s Sunday Swap Meet offerings are all good used original items. Description and prices are as indicated below. In most cases, USPO Flat Rate shipping will be an additional $8.50, unless stated otherwise. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951)...

I'm taking off the trunk and mounting the pickup box on my 1925 roadster. Does anyone have instructions, sketches, or images so I do it right?

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $15 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...

Evening all,

I have here a pair (left and right) set of roadster rear fender irons. These look a bit shorter than I those for my 13. I have the measurements in photos. I dont know if they were modified, this is how I got them.

Asking $90 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and...

Evening all,

Here is a single rear roadster fender iron for the left side. In nice shape!

Asking $45 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on pickup is...

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

I have a friend looking for a 23 Disteel LOCK RING rim with a Rivet Latch, for use with straight sided 30x3 1/2, 31x4 NON Clincher tires. George Hand

FS Early Side light brackets, they are new and Excellent Reproduction. Asking $50 or BO for the pair plus shipping. PayPal prefered. Thank you MTFCA.
light braket.JPG light braket 2.JPG

A currently hot Jelf topic regarding restoration and originality contains an observation by Tim Juhl that has set me thinking. He said:

“Let us not forget that the Model T was one of the most customized cars of it's time.... often beginning soon after it rolled out of the factory. I consider my car's equipment to be part of it's history and have...

FS complete Ford Faithful Ouside Oiler Kit. This is a reproduction of the original “Ford Faithful Oiling System” that was offered to Model T owners from 1911 through the twenties. No modifications to your original engine are needed, no holes need to be drilled. I used one time only and decided to go with different path.

Comming with:
“Ford...

One headlight for sale. Asking 205.00 plus shipping IMG_20210419_082945580.jpg IMG_20210419_083001841.jpg IMG_20210419_083051855.jpg IMG_20210419_083027502.jpg IMG_20210419_083041560.jpg

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

So I notice that my early steering bracket does not align with a 26-27 frame holes. Will a 26-27 Steering Bracket 3539DU work for a early steering column?

00 Tue Safety with Subtlety 1 the purchase.jpg

This will be a 10-part series with an an additional chapter each day, keeping within this thread. It's mostly about safety modifications made to my Model T. I hope you'll find it worthwhile or maybe just entertaining.

There are two primary levels of participation in the antique car hobby On one...

WTB 1927 Closed Closed Car 419 447 5254

Looking to buy a physical copy of the Sept/Oct 1976 The Vintage Ford (Volume 11 #5). I believe it had an article in it which discussed my grandpa’s crash in a 1913 Model T during the Kingdom of Calloway tour.

Darin

ISO new or like new door hinge pins for my 26 coupe.
Thanks in advance.
920-808-three 38 one
Myersair@yahoo.com

DC45CDF4-0356-4918-BCEE-9B0F6D05581B.jpeg 5D35D9DD-6A83-4058-815C-81A8A669FF36.jpeg 2D77F1CA-EF12-4909-8656-886E84584113.jpeg 8254C029-7EBB-4353-889A-E8F40E8C4F74.jpeg

Photograph notes the location is Rexburg, Idaho, no date, but indicates the car may have been part of a tour or auto parade .

DSCN2852.JPG I have 2 buffalo wire wheels good shape (tire on one is 30 x 3 1/2 ) are these worth anything? they look good enough to use...look solid....need blasting to make really nice... DSCN2852.JPG

WTB steering arm with ball socket attachment for 26 TT.

Set of 3 cans with carrier to mount on running board, will need repair during restoration. $275 plus domestic shipping.

Does this ring anyone’s bell? All brass, came with a bunch of carb parts. To me it looks like some sort of primitive carb, 6847BFF0-6921-4013-B722-8301764ABEEF.jpeg 3B857BC2-8CA9-4B48-AECE-2FF26DDE88CF.jpeg C72A725F-343E-4E84-9C7F-7EBD885BD520.jpeg D6C776E9-7A17-4DC4-BCBE-2AB9FFEAF250.jpeg

Anyone know what this hub cap fits? Painted what looks OD Green. Maybe 40’s military?
E4F5AD0C-CA2A-48C9-B106-8AE42D53BD3E.jpeg
5F968BE1-1868-4815-8704-A868EDA0A4EA.jpeg

Looks like drip painted, coating is thick. Any idea? Thanks Dan

I had my transmission out about 15 years ago at which time I replaced all of the bushings, new bands and maybe clutch disks (can't remember). Anyway I took the cover off today to adjust bands and decided to just check things over. This is an improved T with the driving plate that fits inside the drum. The first thing I noticed was that the screws...

Well-constructed period aftermarket side view mirror that clamps to the window frame.
$100 plus $15 shipping anywhere in the 48 states.

Thanks for looking.
Gene Emering

memering@embarqmail.com

SDC18609.JPG SDC18607.JPG For Sale Nice Old Ignition Switch with Two Number 73 keys and amp meter asking $80.00 with free shipping to U.S.A call Matt 503-824-2681

23 Roadster..Does the coil box lid secure the coils in any way? I don't have a lid for mine, and had a coil loose connection at the bottom contact. That made me wonder if a lid would have prevented this from happening. That being said, does anyone have a slant style coil box lid for a 23 roadster? Thanks..Tommy.

The ruckstell in my 25 Tudor is stuck. Not sure, but I think it’s stuck in high. I can’t move the shifter forward or backwards. What should I do first? Is there a easy fix for this?

She’s in real nice condition. Restoration isn’t that old. Has a ruckstell rear end and rear juice brakes. The water pump and radiator hoses has been changed since the engine picture. Also has newly rebuilt coils and carburetor installed.Runs and drives as it should. $9,500

884E0325-85FD-47CC-8C4E-D5A663448377.jpeg...

We all sometimes think of the car I should have kept and not sold. I have several in mind, 1965 Mustand convert, the 1932 B400, The 1909 right hand drive Model T Roadster and perhaps a few more (The 1918 Chev hardtop coupe is one.) What car should you have kept and not sold?

Here are a very impressive and large pair of Bleriot Sidelamps from the pre-1915 era. These lamps are missing their lower burners and oil fonts but otherwise appear complete. As they sit, they measure about 13 1/2 in overall height. The main lamp bodies measure about 6 square and the lenses measure about 5 square. They are made to be used as oil...

I have a good friend that asked me to help him get a vehicle home. He is 79 years old in body but a kid at heart. He has helped my many times at a moments notice including helping with my new shop. I said yes before I knew what or where. When he said we were taking the dozer to get to it and get it out of the woods I was all in. Then he tells me...

Joe Lappin Jr passed away this week at 91.

Most don’t know him as he was more regional/local.

How was a hero. Out of nowhere at age 80, Joe decided he wanted to own and drive a Model T for the first time! And he did!

He found a restoration in progress in an estate, bought it and proceeded to have the restoration done-his way.

It was a 27...

Wanted
Still looking for all 6 of these both sides
It’s what the glass sits in. 4 in the doors and 2 in the rear side windows.

Wanted 1 26-27 Fordor garnish mould
The one that has the steps in it to hold up the glass. This is the rear side window. As per photos

Wanted
26-27 Fordor rear side window holders as per pictures

Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded

Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...

Here is a nice pair of 14 windshield braces. Been blasted and primed. Not pitted, should make a nice set. $120.00 + shipping. Email me at address in pictures. Thanks Dan
0E8BBB97-39D3-4F35-9273-1C1CE35C0B53.jpeg
57A77D32-3F2C-4757-AF78-5F6C64321F4B.jpeg
83CBE93A-5531-4E83-903B-639254C6B98D.jpeg
0CB14FAF-D95B-4882-A7F0-903FB4D19F3B.jpeg

Here is a nice pair of 14 windshield hinges. Have been taken apart, blasted, primed and assembled. Some pitting on back of one, see pictures. All parts are there except the split pins to lock nuts. Nobody is reproducing these that I know of. $85.00 + shipping. Email me at address in pictures. Thanks Dan
A45BD5C8-3F10-4B38-BE7B-4F09C022C845.jpeg...

1909-25 Small Drum Rocky Mountain Brake setup. All that is included is shown in the pictures. I DO NOT have the brake drums.

I bought this set about nine months ago for my speedster. It was advertised as a large drum set. Unfortunately, I waited until now to try and install them and I realized that they are actually for a small drum axle and are...

Eastern Idaho State Fair, Blackfoot, Idaho 1921
Model T front and center !

HELLO FELLOW CAR LOVERS,
IT'S BEEN A WHILE SINCE I POSTED ON OUR SITE, SO I WANT TO WISH ALL OUR VIEWERS A HAPPY EXODUS FROM THE COVID NIGHTMARE. I HOPE IT'S ALMOST OVER. I HAVE HAD SUCH FINE RESULTS FROM ALL MY POSTINGS, IT IS A PLEASURE TO BE BACK WITH THIS HAPPY ONE.
A WHILE BACK, A VERY FINE WOMAN FRIEND ASKED ME IF I WOULD DRIVE HER & HER...

We will be holding our annual spring Model T- Model A- prewar swap meet on April 17th at 7 A.M. at our farm 5 miles East of Kenyon, Mn. at 7525 Co. 12 Blvd. It is 50 miles south of St. Paul, Mn. It will be outside only. No setup charge. We have room for primitive camping the day-night before unless there is heavy rain. There will be a lunch wagon...

Somehow I ended up with two of these, so I'm selling this one. As far as I can tell it has no markings. Price is $25.00, which includes USPS Priority shipping. If interested, please PM or email me with your shipping address, and I will reply with payment instructions. Thanks! :)

For sale, completely restored. This is in show condition with NO wear. Not used after restoration of an excellent original car. All original, laser straight body and fenders. The paint is way better than new. It needs nothing. The price is $15,500, less than half of what it would take to restore it. No TEXTING. 507 458 6778.

Thanks for any ideas. It's going to be in a thread and I'd like to be sure about the make and model.
Thanks,
Rob

1D5A043E-9878-4DC4-A3AD-A93A30013A44.jpeg

This is a unique split rim tool made by a company called Hagner in Norristown, PA. Looks complete but needs to be cleaned up.

You can read the patent for it here:

$150 plus shipping in the U.S.

NOS in the box with instructions, These were made in the 1920s and never sold! Limited number available. $30 plus $4 postage for one OR $25 each if you get 2 or more and postage will be included!

Get rid of that timer roller bounce!!

I am planning to prep and paint my car soon. My original paint plan was Windsor maroon. does anyone here have pictures of model ts with that color? also, i am going to paint the fenders and running boards black.

When I took these apart to get re-lined seemed the first pictured narrow band for reverse had the two straight slot ears and the second narrow band for slow speed had the two rivets. Does it matter which narrow band goes on the related drums, any input would be great.

First correct answer. Only one clue, it’s T Ford related. The first correct answer can have a choice of one of our spring loaded oil can holders, or my left kidney. I’m still using my right one. 3B0EF058-56E3-4466-A36B-BE903B4A18E5.jpeg

Helping an old friend sell her diseased husbands 1926 Ford Coupe. Very nice older restoration needing nothing. Ready for the next touring season. Ruckstell rear end, Rocky Mountain brakes, varnished wood wheels, Motometer and dogbone cap, extra chrome trim on both interior and exterior. Take a look at the pictures. $9,500.00. More pictures on...

20210409_212024404_iOS.jpg when I was installing my classtique top on my touring I had the straps from langs for the front bow. Where they were so short and stiff it was difficult to tighten them evenly. It occured to me that a turnbuckle would woould be easier to adjust. I put on the turnbuckle from the hardware store and found it worked much...

Some old ads in one of my Ford supplier books from 1918-1919. Enjoy.

I am buying my first Model T this week. It is a touring car that was made in October of 1913 so it has a 1914 body style. The car was restored to be the way it came from the factory without a battery or electrical lights. I want to add a battery, turn signals and brake lights for safety.
.
I have two questions about about the simple light bulb...

Hi all .... as it says, I’m looking for a Metz intake manifold that is interchangeable with the standard model T Ford manifold. Markosterman@icloud.com

Massachusetts To California Transport Now

Bolton, MA to Los Angeles, CA as shown

0E1D69DE-49B9-48F2-8381-87BAB50E872F.jpeg

17 feet enclosed trailer space - 6K capacity

Call or Text

FJ
260-804-6695

Model T Transmission Brake Drum 1909 to 1925.
$80 Each Or Best Offer.
Have Two Other Transmission Brake Drums For 1909 to 1925 Model Ts For Sale @ $80 Each Or Best Offer.

Model T Spark Plug Whistle & For Early Cars For Sale.
Have two spark plug whistles for T & Early Cars.
One whistle has tapered thread & the other has a straight thread.
$135 Each Or Best Offer Each. Hope someone can use one.

My low speed jet is loose and rattles off set point. I was tired after running new engine in today in the shop. Collar seems to be loose that the jet sets in. I will take it apart tomorrow but figured I would ask tonight. High speed is fine. How is resistance held against the screw?
Thanks guys

Very solid, no rust out. it has been hanging in the shed for years, includes hangers. $225 + shipping. NO TEXTING. 507 458 6778.

Trying to slide one in. Nice coupe with all glass.needs inner wells and small patch behind pass.door. 5000.00 in southern in. IMG_20210416_123313835_HDR.jpg IMG_20210416_123329774.jpg IMG_20210416_123313835_HDR.jpg IMG_20210416_123259749_HDR.jpg

SOLD!
Here is a really nice, all brass early Jones 60 MPH speedometer. The overall diameter is about 3 and the depth is about 2 1/2 not including the mounting bracket. It has a very clear and crisp face with strong numbers. There are no cracks in the brass body or the rim which is unusual. The original beveled glass lens is clean and without chips...

Not for the wallet shy individual, but If you are need one, here you go. As seen on Tbay.

For sale is a pair of good rear axle bearings $100 shipped in the US email me or text charles jenkins 84 @ gmail .com

I am just now getting to the water pump on my 08 model SR. The water pumps were built into the radiator similar to the first 2500 T's, but ran off a gear mounted on the flywheel which is on the front of the engine. Mesh was adjusted through rubber pads/shims on the radiator mounting. I found that the gear on the water pump shaft is Fiber. The gear...

60D47D8C-01C9-46B4-81E4-DC6C11AB80BA.jpeg BCB68BCA-2869-4490-9CE2-52F487B13E0E.jpeg 23452ED0-3AEF-4AF0-9C88-87660BA309B4.jpeg 709B19C3-952B-4CA5-A9D9-B2A0A407DED1.jpeg