MTFCA Forum

Sitting here starting the process of measuring 8 bearings & checking for taper using 3 different points. I decide to procrastinate and started thinking there has to be a better way. Is there? Love to hear your best practice? I’ve gone as far as using a bar at standard 1.062 to see the height of the rollers above the cage.

Crunch. Ouch.

Exhaust Manifold broken.jpg

Many, many bad word were said.

This Frontenac exhaust manifold had been repaired (at least) once before and the flanges were so thin, spacers were needed for the manifold to clear the hogshead. There is no marking on the head, but the combustion chamber measurement indicates it is a Model T....

Norm's latest adventure in What have you done... reminded me of driving down the street in a town two states from home and a couple of guys in the car next to me yelling that water was pouring out of my car. Fortunately the plug was leaking but not lost, and fixing the leak was easy. But if it had fallen out on the street it would have been a real...

This is a very cool truck
has the cool type of hoist for the dump. the family owned it since 1969 and was a driver, parades, trips to town and fairs, the owner parked it in 2000 when his wife became ill, then he became ill and it sat. the family sold me this plus another chassis from the estate, clear title with truck
I do not know the brand of...

Most of the steps in assembling a carburetor range from easy to super-easy. But I have always found lining up the holes in the throttle shaft and plate another story. You can see by the pliers marks on this plate that I've been struggling with it.

IMG_0693.JPG
On my own carb I don't care about the marks. As Dude Lester says, It don't hurt...

It's not just the spelling. The photo sure looks like G to me.

Screen Shot 2022-08-11 at 12.10.33 AM.png

Nice 11 tooth pinion gear. $40.00 plus 8.00 shipping.

Email me
Rustrodsrule@yahoo.com
Thanks Mike

Nice 40 tooth ring gear.$40.00 plus $16.00 shipping

Please email me
Rustrodsrule@yahoo.com

Thanks
Mike

I am about to embark onto repairing the door hinge pins on a 1914 Runabout and am curious if anyone has done this and would be willing to share their experiences.

Since the hinge pins are 'killed' on the one I am working on, I think my initial thoughts are to align the two pieces the best I can and then put a tack-weld onto the hinge loops to...

For Sale: 1913 aluminum hogs head with pedals $350 plus postage
Has FORD script cover and clutch release ring
20220805_202522.jpg 20220805_202744.jpg 20220805_202541.jpg

Brass Speedometer Bracket. For Stewart, Jones, ect…. $140 to your door in the lower 48 states.
423-2eight4-97fifty. Text or call. Thanks.
A8E3F816-BC83-440B-A916-871C73C63E7A.jpeg 1ABB4AEF-363C-4F8C-84E5-600C488208E2.jpeg EC9AD7FC-0582-4AD9-AB0F-E5940480064B.jpeg

WTB 26/27 emergency brake cam levers. 217-649-0724

WTB 26/27 emergency brake cam levers. 217-649-0724

Hi all, I’m trying to scour the internet for information on what the correct wheels would be for an early 1917 (Feb 1917). My car currently has square felloe and pointed spokes on 3-of-4 wheels, and one of the rears is a rounded felloe with rounded spokes. From best I can tell from Ford archives, square felloe wheels didn’t come in until late...

Howdy all, I’m fabricating the “third member” top iron (the one that attaches to the windshield) for my 26 RPU and have acquired some older top irons that I’ve bead blasted and will start hacking on to make these two pieces. I’m going by the measurements of the photo here showing these irons to be 29” long and figuring that this is a total length...

I would appreciate all there is to know about this option. How does it work? How to initiate. How to find info on this.
Thanks - john

In good condition.
Rich 561 262 039 three.

Ruckstell shift lever. This one has the later spline on the arm and lever for additional adjustment options. Price is $175 plus domestic shipping. Mark Chaffin (951) 805-0928

20220810_195033.jpg

DSC00021.JPG DSC00020.JPG For sale. Battery carrier. Part #5150A as shown in Langs book. $40.00 plus freight.

This is my last writing on the forum, will not monitor or answer questions anymore, logging out!

Back to my SWAMP!,

Shrek

MOSCO Brand ton truck rear hub puller. Diameter is 2 3/8 . In great condition $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20220810_195217.jpg

20220810_195325.jpg

I am installing door window glass in my 27 Coupe. I can't seem to attach the bottom metal channel to the glass (on the door glass ) with out it falling off after moving the window up and down a couple times. --- does anyone now a way to attach the metal channel, and stop this from happening ... I have tried the window setting tape, it is not a...

Polished aluminum intake I bought in the early 80’s I thought from Bill Rader but Dan M. said somebody else made them model m Winfield size B it has a steel plate sweated on to the mounting flange done years before I got ran well on my car has Ben hanging on a wall for at least 3 decades. 700.00

Late 11' to 12' aluminum transmission cover. No reinforcements around bolt bosses. Pedals in above average condition. Shafts are tight in the holes. Later incorrect inspection cover. Will also need reverse and brake clutch cams to complete. Price is $400 plus domestic shipping. Mark Chaffin (951) 805-0928.

20220809_170756.jpg...

giphy_(17) (1).gif Anyway, I've decided to move my '26 along. With my busy work season coming on, i won't be back in the garage until April '23.

Got some USED TIMERS in the mail. The contact rings look serviceable. I might get some rollers and test them out.

Second timer on the right I attempted to polish. Both looked like the last picture when I started

Original Kingston Coilbox key. Excellent condition. Very hard to find. 100.00 shipped lower 48.

B6B4FD38-9249-4E8C-906C-C9D068E59CEB.jpeg FF98D1F1-578F-412F-A34F-7D1CBBDD6B67.jpeg

I was reading some old posts from years ago, and wondered, what ever became of Fast Frank Harris ? He was a common fixture on here, kinda faded away after his racing pal Humble Howard Genrich passed away.

9BB140F2-A3D1-4CE9-8A25-76D4F47DFF7D.jpeg DB18A0F7-1B7A-4739-B080-51B9CA9B222C.jpeg

Like the subject says I am thinking about taking some time off this year and heading to Hershey. I have never been to the swap before and do have a few things I am looking for that I have not been able to come up with. Like a top for my 25 Roadster. Any tips from the Hershey pro's as to what days are best, where to stay or how much time to plan on...

I'm trying to get parts to install a speedo on my '14. I have a decent looking Standard Speedometer head but it has no main input drive, I already have a nice correct cable, a nice 2.5:1 swivel and the correct steering arm with the hole for the mount. I'm confused as to the correct swivel drive ratio for the Standard , (either 2.5:1 or 1:1 ). I...

I had one mirror of suitable patina for Henrietta. 20220810_185911.jpg 20220807_111355.jpg
Now I have a pair.
I was given another head of the same dimensions, and made the brass mounting and arm to mount it. Both left and right mounting arms fit on the underside of the header board across the front top bow.
I just have to wait 50 years for the...

Recently I've helped a number of our club's new Model T owners with assessing the mechanical condition of their purchases. One common problem we found were rear axles that needed replacement - most damaged by the axle nut not being tight enough. Cracks radiating from the key slot, worn slots, corrosion / damage on the taper, etc., were the most...

This has probably been posted before, but it's worth the look. It just makes me happy to look at it ! No date, place or comments with the photo.

This posting was originally in the parts for sale forum but I thought the information needed preserving so have moved it to the general forum.

Chris

Model T 26-27 Wire Wheel For Sale $110 Or Best Reasonable Offer.

wheel 1.jpeg

wheel 2.jpeg

wheel 3.jpeg

For Sale: 1919 to 1925 Headlights. includes bucket, reflector, rim and castle nut $225 plus postage. for the pair

Looking to buy a bottom seat spring that measures 41.5 x 19 .
A bit smaller is fine, but no larger.
Email brooks saint ives @ aol dot com (all one word).
Text is best @ 609 920 4220, or by calling the same number.
Many thanks, in advance!

Hey All!
I have a 1916 touring and I have found some replacement parts. Some are difficult to find. I was wondering what suppliers would you recommend ? I suppose all the retailers use the same source. Is this the case?
Thanks,
Campbell Tellman

FS all original Model AA ford truck. It was used as a commercial garden truck. The body is in great condition, fenders are very good and straight. Had a valve job less than 20 miles ago. Never any rust. The patina is all real. The wood box is in very good shape. Tires have good thread, but older. It has good Mn. title in my name. It has writing on...

Here are the Rajo head photos

I will post the photos - need to chagne size...

I have noticed an odd situation with rear spring for my 1927 coupe. The end of second leaf on the right side is not in contact with the bottom leaf. The attached photo show the situation.

While not shown in the photos, there is a slight wear pattern on top of the bottom spring below the end of the second leaf.

Is this problem??

-Is any one imnterested in this head? Pick up in Minnesota Twin Cities. Seeking best offer. has rest--rods, etc. no cover.

I need a couple of commutator control rod swivels - P/N 3534S. Chaffins doesn't make them anymore so none of the vendors (that I contacted) are oit of them as well. If no one has some new units, I would take good used ones, just advise what you have, how much and how you want to get paid.
Thanks
Jerry Young

****************************************

Google “ Model T Transport … 💡

You must own the vehicle you want transported
to be on my schedule - no exceptions.

Transport space subject to availability.

Space is filled on a first come - first serve basis
by written confirmation ( Text - PM - DM - Email ).

Call or Text FreighTer Jim @...

I just listed my 1915 Model T Racer on the B.A.T. auction site.
Take a look:

Rod
PS:
This is one FAST little car!!!! :D :D :D

You need to worry about installing a specific camera plugin to use the OBS virtual webcam on your Mac, as the virtual camera feature is built into the latest version of the software. So, to start the process, you just need to download and install the latest version of OBS Studio. You can download directly from the OBS site or open your...

For Sale: NOS Military Vibratory Coil, Sealed & Waxed,
$75 each plus Shipping. In Ocala, FL. (More than 50 for sale.)
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

FOR SALE; rear wheel puller 09/27 $65 plus postage

ton truck wheel puller 18/27 $100 plus postage

This 1929 Ford AA Truck as found in the foothills
of El Campo, California around in the early 1970’s
by Bob’s family when they were out motorcycle riding
and on a return visit his Dad made the owner an offer
to buy it which was accepted.

AA1F27CA-C783-4EE8-A7A8-3621585ED1D4.jpeg

The truck was owned by Arden Dairies which started in
El...

For Sale : Exhaust Whistle, $90.00 Plus Shipping
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

For Sale : Exhaust Whistle, $70.00 Plus Shipping
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

For Sale : Neville Steering Wheel Spider, $500 Plus Shipping
(No PM) If Interested, Emails Only to : RWILL1914@AOL.COM

Were gas lines always zinc plated from 1909? I have a NOS one that is, and an original one on my 1925 too.

Looking for 3, preferably 4, nickel Schrader P/N 2061 rim nuts that fit Schrader 725 (fatter) metal stems.

Having trouble loading photos. These are the formed flat nuts with recessed rubber or leather washer in the nut recess.

Thank you. Text works at 93 one - 6 oh 7-8353

Ron Wenzel in HSV

1917 Model T Ford Speedster for Sale
This car has never been driven. Zero miles!
The bones of this project were discovered in an abandoned mine in the
California Gold country about 5 years ago.
All frame rails, cross members, suspension and steering components have been
blasted and powder coated. The engine has been completely rebuilt with...

I need 2 floor mounting brackets for 1927 Tudor front seats. I have 3 but one of those is broken so not usable.

Many thanks for any help,

Joe

Here's a Livingston radiator being used for its intended purpose, to provide extra cooling in hot environments. This car is working the Nevada desert at what is now an aviation research facility.

It might have come from a dealer specializing in desert work, like RC Boyer in Mason Nevada, on the Nevada Copper Belt railroad line. He advertised his...

COMPLETELY REBUILT STARTERS NOW FOR SALE.

The 6 Volt starters w/ with BRAND NEW field coils are $375 each with core exchange
12v converted starters are $500.
ONE YEAR , unconditional, no questions asked warranty ALSO included.
If you don't have a rebuildable core, the Core charge is $25
Shipping is $21 fully insured anywhere in the USA.
.
5...

Good afternoon guys ,
Just wondering if it’d be ok to use 450/475-21 tires on my roadster pick up project ? Will I need different sized tubes and flaps as well ?

Thanks in advance !!

For sale: excellent condition black steering wheel with screws $50 20220705_133502.jpg 20220705_133514.jpg plus postage

I've looked for quite a while for a correct screw driver for my TT. I found one today at a steam and gas engine show for $8.00.

Is there any record of years when this was provided in the tool kit?

Screw driver.jpg

Well, it's been hot so I've been chipping away as I can. The garage is usually around 100 in the evenings. I did manage to find a guy that could, and did weld the wheel studs on. I know the best thing would have been all new (3 at least) hubs, but that would have been expensive.
As for the charging system.......still stumped. As you may recall...

FOR SALE: starter bendix $50 plus freight

NOS: parts to rebuild
starter drive head $8
starter drive key 35 cents
head sleeve for bendix $12
bolt and washer set $3
washer 50 cents
bendix spring $11
cover screw 50 cents
cover screw and washer set $1
bendix head spring screw $1.50

all plus postage 20220615_102415.jpg

For Sale: rear fender bracket to frame bolt set $15
manifold gasket set 09/27 $8
spindle arm bushing 09/27 $1
starter drive sleeve 19/27 $12

all plus postage

For Sale: 1915 to 1925 coil box in excellent condition $155 plus postage

FOR SALE: used head in very good condition $100 plus postage 20220721_124851.jpg 20220721_124955.jpg

FOR SALE: Brass steering to dash support bracket. Bottom only. $20 plus postage
20220721_213908.jpg 20220721_213902.jpg

For sale: Drag Link $200 plus postage

Restoring or working on a Model T is hard work, but generally pretty easy. Some projects are easier than others though. This is the second T that I have done a frame up restoration on, and it was time to reassemble the painted leaf springs. The front springs are really easy to reassemble, and can be done with a couple of wood parallel clamps and a...

I'm missing one hood board bolt for my 1915, the shorter one for the front. Here's a photo of the rear hood board bolt already in hand.

If any one has one, I'd like to give it a home. Thanks!

Aermore exhaust whistle and cutout valve NORS. No longer available from the manufacturer. This one is in excellent condition. Price was $400 now $375 with domestic shipping included! Only have one available. Mark Chaffin (951) 805-0928

Screenshot_20220806-071407_Chrome.jpg

Prices are as indicated below. Shipping is an additional $9.50. Combine items and save on shipping if they fit in the same box. Mark Chaffin (951) 805-0928

20220803_175536.jpg
Early front motor mount excellent condition $50.00 SOLD

20220803_175237.jpg
Early timing cover (12-14) $50.00

20220803_175057.jpg
Ton truck rear spring perch set...

This is my first ride-along video. No talking, no music, just the whir, whine, and putt of the T.
ReidsvilleRd20220729.jpg

Saw an Autowa bodied Model T this afternoon. A very nicely restored roadster body on a 26/27 chassis. It was manufactured in Ottawa, IL. Does anyone have any information / reference material for this vehicle?

What I have: what i believe to be, a pair of 1924/25 Coupe rear Fenders, i am told they were used on 25 runabputs as well. View then at Hershey and decide that they are what you need. They are clean, straight, and older (original?) paint. Some surface discoloration, no pitting. Have not had body work done to them. Honest 'original' ford steel....

20220528_174608.jpg 20220528_174627.jpg For Sale: Fender eye bolts and nuts. 14/25 $5 each Ignition switch plate with amp meter Ford script on amp meter and below switch. switch is broken. $50. Ignition switch but no amp meter. Ford script. $50 Ford script spindle arm $25 spindle arm in primer color$10. no script but does say made in USA front...

While I realize Ford never made a closed cab pickup, I wonder if I could get opinions on what year and model of closed car this one started out as. Sure looks nice!

Could someone send me pictures of the Rands Hinge mounting to the windshield frame from the back/inside side showing the hinge to upper and lower frame location. Also, the centerline location dementions of the mounting holes (from the flat of the frame). I am using a reproduction frame with original Rands hinges and I guess I have one shot at...

Anyone try the blemished smooth grey clincher tires on sale at Coker for $165 each? At that price they should have sold out last winter. Has anyone bought and mounted them?

Listing this for a friend, hope MTFCA is ok with me doing this. I have driven it and it runs and drives nice. Selling his estate to move. I think it's a '29. Don't know the price. Call or text for info and more pics 419-357-3229

Which angle of cutter is used to just clean up valve seats ?

Free: approx 4 lbs (approx 300 pcs.) of steel hex nuts, size 3/8 x 24 Fine Thread, fits 9/16 wrench. Good quality never installed. They're not castellated but they're a common Model T size. They're yours if you pay shipping (USPS Priority Small Flat Rate Box.)

Thanks for looking.

38f01.jpg

Model T Wheels And Hubs For Sale.
Price $1100 Or Best Reasonable Offer.
Pick Up In Ct.

A couple of months ago, I installed (5) brand new 4.50-21 Goodyear tires on the 21” split rims of my 1926 coupe. I took a picture of one of the labels. While I think I know what the numbers 4.50-21 mean, I am not absolutely certain. I have no idea what the CCAE1 means. Jim Patrick

3E7CC8EE-10A2-42EA-890F-6AE439BA5456.jpeg

For Sale, $35 (Shipped) per roller, are five timer rollers / commutators for a Ford Timer. There is no FORD script anywhere on the castings. These brass rollers are likely from pre-1920 as I understand it, around 1920 Ford timers transitioned to a stamped steel roller in lieu of the cast brass one. While I believe it to be Pre-1920, I will let you...

For Sale : Monarch Auto Lock 18 Steering Wheel, $850 Plus Shipping
( No PM ) If Interested, Emails Only to : RWILL1914@AOL.COM

For Sale : Neville 17 Steering Wheel, $650 Plus Shipping
(No PM) If Interested, Emails Only to : RWILL1914@AOL.COM

For Sale : Neville Steering Wheel Spider, $500 Plus Shipping
(No PM) If Interested, Emails only to: RWILL1914@AOL.COM

For Sale, $30 (Shipped) per roller, are five timer rollers / commutators for a Ford Timer. There is no FORD script anywhere on the stampings. These steel rollers are likely from post-1920 as I understand it, around 1920 Ford timers transitioned to a stamped steel roller in lieu of the cast brass one. While I believe it to be Post-1920, I will let...

Free: approx 4 lbs (roughly 250 - 300 pcs.) Truss head (or mushroom head or brazier head) rivets, with a 3/16 x 1 1/4 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or...

For sale: crankcase breather or oil filler screen in good condition no holes. $50
Exhaust pipe pack nut $10
cover band for generator $5,
heavy flat pedal Brass trim set $50
steering gear quadrant $20
Aladdin Wick Cleaner $10
Flame Spreader $15

all plus postage
20220719_195847.jpg 20220719_195823.jpg 20220719_195835.jpg

On to New Brighton.......

5B9841F1-50BF-435E-BBFB-EFAAF36B2D53.jpeg