MTFCA Forum

IMG_4498.jpeg IMG_4502.jpeg IMG_4531.jpeg IMG_4537.jpeg

Anyone happen to have the rear cone mount, cone & shaft for a mint original KRW crankcase jig available ? I'll make it worth your while !

FS Hard to Find 1913 Only Roadster Turtle Deck Assembly. Nice condition except one small area at the bottom rear edge. Hinged and handles are free. Some very light pitting. Needs very little to be perfect. Good wood framing. $475.00 plus shipping or free delivery to Luray next May
Lang’s 1-800-872-7871.

Is there any demand for either a spray needle or jet for the above carburetors?

There aren't that many of these carbs out there relative to NH's and L-4's so I know there is a pretty strict limit to demand. I just would like to gauge just HOW limited it would be. My shelves are presently lined with unloved and unwanted parts as it is and I don't...

2 vaporizer carb and manifold for parts or restoration please look at the pics I'm not super familiar with these. I do have another bottom section with bowl not pictured that will go with. 100$ plus the shipping for the pile or 50 each if you want one

I purchased Model T serial number 22 from Aardeen Vaughn this week and just got the car home today. Many years after use the body was taken off and a child’s herse body was put on the car. I have a 1911 project so I also bought the herse body and will put that body on. The wood carving on the herse is a work of art. Mr. Vaughn put a new body on...

This post has been deleted.

For Sale 13 early front hubs. 3 are not machined for speedo gear $80 each. Others that are machined $50 each.Steve 701 212 5009

It would probably look like this.

Andy IMG_2381.jpeg

For sale: #332of 2500 made Franklin Mint assembly line to commemorate Ford's 100th anniversary. Excellent condition, with certificate of authenticity.
Asking $650.00, shipping included to lower US. Always open to offers.

Hood former and fire wall for a 15 16. Not super pretty but workable 70$ plus the ride

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Not to open a fresh can of worms on an old subject ( I’m going to anyhow ) I’ve ordered a new flat tube radiator for my roadster pick up from brass works , my engine currently has a water pump , question is , will the water pump restrict the cooling capabilities of the new radiator and should I remove it , or would it be ok to just leave it on ? I...

I’m looking for a pair of rear hubs for a later set of demountable wheels

For Sale Generator front covers. $10 each. 2 must be 26-27. Steve 701 212 5009

For Sale. Horn pictured. I think? brass bell was 15 only. No idea if it works. Bell has lots of small dents.$100. Steve 701 212 5009

For Sale mag horn pictured. No idea if it works. $40. Steve 701 212 5009

For Sale hinges pictured. Brass repo. $30.Steve 701 212 5009

I realize this is not a Flivver, but my hopes are to finance a T. So, if anyone is interested in a solid and running 1920 Chevy time-capsule, here is a great candidate. Runs and drives and mostly original. Located in Oswego, Illinois 6306083978. Asking $8500 obo. Newer (1990s) roof, upholstery, wiring, and clutch leather. Tires hold air but are...

Just an observation I've made lately with regards to items in the Classified section, be it for cars or parts. It seems often times these days when an individual is interested in buying a certain item, they will reply to the ad by asking to be contacted by the seller. WHAT?? If you want to buy an item, why on Earth would you make the seller come...

Got ours in the 1925 pickup.

The manifold is in excellent condition, the ports look unused. The plunger spring takes more effort than first expected but it needs to cause the short burst of fuel. The green tap is preventing a new ferrule from sliding off. Have everything else per the parts list except the supply elbow and 3/8 supply line. These parts, from the plunger to your...

Ten motor mount caps NOS. $20.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_100011.jpg

Free: Two steering gear cases. One has a crack all around the bottom from being worn almost all the way through, the other has a small-caliber bullet hole in it. Both have decent threads and neither are egg-shaped from being dropped, these are almost too good to throw in the scrap pile. They are yours if you pay shipping.

tstgr16.jpg...

HELP! Would like to buy one NEW still in the wrapper 30 x 3 1/2 Firestone Non-Skid All White Tire. Being as my kids call me Technologically Deficient I hit the wrong key and mistakenly purchased a new still in the wrapper 30 x 3 1/2 Firestone Smooth All White tire. I will consider trading my all white smooth tire for a Non-Skid all white tire or...

I’m looking for a pair of rear hubs for a later set of demountable wheels

Guys,
I've stepped away from managing the forums day to day. However, I'll remain an active participant here, and if Chris B needs help, I'm more than happy to jump in and do what I can. The information we all share is invaluable for so many people and it's been a pleasure babysitting so many of you so often ;)

I'm now just Jeff , AdminJeff is...

Castings for the dash rail on 1903-04 Ford. $400 pr.
Rear door sill plate for 1903-04 Ford tonneau. $200. IMG_4558.jpeg

IMG_4600.jpeg
Dash rail also fits 1903 Cadillac.
IMG_4607.jpeg

I have two sets of Ton Truck High Speed ring gear and worm gears. One comes with a complete Ruckstell differential assembly. Both appear to be in very good condition. The ring and worm gear set is $150 plus actual shipping. The Ruckstell differential, ring gear and worm gear set is $250 plus actual shipping. Pick up is preferred as shipping will...

Fan bracket / water outlet in good condition $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_094118.jpg

20251209_094127.jpg

I'd like to buy two (2) sets of front wheel ball bearings, or just one if that's all you have.

Please let me know what you have; please send picture and how much $$ you'd like.

Thanks.

Bill Everett Model T Ball Bearing Set.jpg Model T Ball Bearing Set.jpg

Has anyone here on the forum using or considering us a 3D Printer to make patterns for casting parts.
Fitz

Looking for the inspection plate for a 1910 hogshead.
Best John

Hallo model T friends ;
A club member asked me or it is possible to put a startermotor on a Openvalve Engine .
Thank you for your answer
Toon

In finally getting around to fixing my coil tester I have a couple of questions for those more in the know that may have better knowledge than I do. The coil tester works as it should but the wiring is in need of help. Someone before me had been into to it to replace some of the wiring, bad vinyl wiring and plastic crimp-on terminals, while...

Floorboard riser set. Price is $25.00 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_094315.jpg

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

An assortment of very hard to find Hartford shock parts. Price is $300 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_101003.jpg

Speedster headlight bracket set $20.00 plus $8.50 shipping. Send me a text or PM with your want and information. Mark Chaffin (951)805-0928

20251209_115909.jpg

Nice late style crank handle. Usually, the handles are frozen and do not turn. This one works as it should. Price is $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_111220.jpg

Miscellaneous parts as described below. Prices are as indicated. Domestic shipping will be $8.50 USPO Priority Flat Rate. Combine items and save on shipping. Mark Chaffin (951) 805-0928

20251208_135502.jpg
Front outer wheel bearing sets $45.00 per set / SOLD

20251208_135754.jpg
Good steering pitman arms $40.00 each.

20251208_135939.jpg...

I foolishly sold my last complete Wizard awhile ago, and now cannot find my sketch of the adjuster needle - I have some basic measurements but not a couple details that I'd like to have.

Here is a new adjuster needle and I would like someone with an AUTHENTIC Wizard carb that isn't on their car to please compare the visual of my needle to...

Assortment of license plate brackets $20.00 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_092725.jpg

Early front spring perch set with oil holes. Price is $75.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_101756.jpg

20251209_101812.jpg

WTB 1922 T horn button bracket to stering column.
With button swith if possible.
Thanks Larry

An assortment of early distributor coils. Price for all $50.00 plus actual shipping. Mark Chaffin (951)805-0928

20251209_085241.jpg

Horn button missing the button inside part isn't pretty probably needs to be replaced as well 25$ shipped

Nice 2301 Stewart drive gear 16Tooth 8 pitch. NOS? The dealers are $32.95 + shipping, how does $28 delivered in the states

-
2026 Bakersfield, Brass – PreWar Swap Meet
-
Registration Form, Flyer, and Vendor Space Map.
-

Looking for a wood seat frame. They have rounded front corners. I just need the frame. Springs/strap springs would be a plus. What do you have?

IMG_4087.jpeg IMG_4086.jpeg IMG_4085.jpeg IMG_4084.jpeg IMG_4083.jpeg

for sale: Ford script #T 604 fan bracket $15 plus postage

314-575-7115 for pictures

An assortment of mufflers as described below. Mark Chaffin (951) 805-0928

20251205_140843.jpg
Pressed steel muffler new with some light surface rust. Current retail price is $74.95. Get this one for $50.00 plus actual shipping. (SOLD)

20251205_141012.jpg
Cast iron end muffler new. In primer; however, has some shelf wear. Retail price is...

WTB Horn button bracket for 1922 touring.
If possible with the switch and button.
Thanks Larry

For sale: front fender brace (bracket) for 26/27 $20 plus shipping
20250325_182315.jpg

I just found one thanks everyone for the reply's

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other one. l don't think they have ever been used. dealers are asking $36.95 + shipping. $60 including shipping.

Enjoy Your Day!

about 6 inches by 2 1/2

Here are 4 more fender bolts. $20 + shipping. See pictures. Email me by forum. Dan
IMG_4824.jpeg

Here are 4 fender U bolts. $20 + shipping. See pictures. Email me by forum. Dan
IMG_4823.jpeg

Here is an early fender mount with a u bolt. See pictures. $15 + shipping. Email me by forum. Dan
IMG_4821.jpeg
IMG_4822.jpeg

I need a pair of firewall to frame brackets to fit 1915 t

09-17 muffler wrap kit
3 stainless steel bands and white material.
New $20 plus shipping.

IMG_4262.jpeg

Is Les Schubert still working on the reproduction Ross steering box?

My dad and I restored this 1909 Touring between 1970 and 1977. He purchased the original chassis and body in the 1960s but I don’t have an exact date. I was still in my teens when we completed the build so I don’t have specifics or a full list of parts that were needed to complete the car. I know he shipped the wheels to someone in CA who...

I am looking for a decent 1926-1927 headlight. Let me know what you have and need for it.

I recently reconditioned my starter.
It runs smooth and the shaft is straight and runs true (no bends or wobbles) on the test bench.

It installed nicely and when the starter button was pushed it engaged and cranked the engine well,

..... however ......

When the starter button is released (without the engine starting) it makes a bad 'graunch' as...

Here I am in the old folks' home, without a T. I haven't hand-started an old car since September 7, 2023. I've been wondering if I'm now physically up to the task. Probably so, but it would be nice to give it a try and see if I can still crank-start. Does anybody on the forum have a running T near or in Winfield, KS, that I could try to start? If...

Left the comfort of Florida's version of 58 degree cold to brave Ohio's snow & ice 10 degree version this past week.
I just wanted to thank all the Ohio T folks I met this week for their very warm hospitality, specifically Joe Bell, Bill Reep and Nathan Fahrni. (Tim Wrenn, sorry I missed you this trip!!)
Being in the area, I just had to make a...

New top boot covers with top edge flap as original in Colonial Vinyl fabric by Haartz
For 54 inch wide top bows’. $ 395 plus post
Edwards. 795 828 5405

Any original or reproductions out there?

Here is a pair of Roadster or Touring top mounts. One is bent some, but may be straightened. $10 + shipping. Thumb screws are wort that. Not reproduction. Email me by forum. Dan
IMG_4826.jpeg

Lot of 2 Brass Steering Gear Quadrants, used, not great(?). Also included is a Two Piece Timer Cover, has a couple of dings (please see photos), I am guessing it is reproduction. Also included is a reproduction oil can holder, brass plated steel.

The Steering Gear Quadrants, the first one is marked as being Dodge Brothers, no cracks or breaks but...

For most people, the first time is tough. That gives lots of us the impression that it's inherently unpleasant. If you're new to this game, don't be intimidated. With practice it becomes more familiar, and you learn some things to do and some things to avoid. The more you do it, the less you will dread it. A few suggestions:

1 Do it on the car,...

3 really nice valve stem caps. Unfortunately I don't have the rim nuts the original nickel is in great shape! I hope someone can match these up and complete a set! $30 plus the ride
Enjoy Your Day!

Screenshot_20251205_214211_eBay.jpg Anyone know about this horn. It has 3 terminals and is marked 6v.
I was going to try it out in the shop. But thought I better ask for some advice first.

I have terminated the pending sale of my 1910. The buyer took too long to come here to pick it up and settle. So I am going to keep it after now 79 years and as long as I have two feet of solid earth it will be in our garage. I bought it when I was 14 and I will be 94 on June 21 this coming year. That will be my 80th year with my beloved T. I will...

Any out there?

Here are six of the Model T Ford Club Of America repairing and restoring manuals. These six books cover the Model T engine, the Model T transmission, the Model T front and rear axles, the Model T electrical system, the Model T carburetor, and Model T speedometers. All of these books are in new condition.

These retail for $12 each, plus shipping,...

Bracket has been sold.

One Side Lamp Bracket for Oil Lamp, I do not know if it is reproduction or original, but I am leaning towards original. The bracket has been powder-coated black and there are number that can be seen but the powder-coating has made them impossible to read. The price is $40, shipping included (in the U.S.). Payment methods...

LOOK AWAY, this is not a Model T part it is for the Model A.

One New Old Stock Starter Gear Drive for the early 1928 Ford Model A using the Abel Drive starters. This will only fit the original, unmodified Abel drive-type starters, not any of the other/later Model A starters. I have an early 1928 Model A with the Multi-Disc Clutch and the correct...

One set of 4 (new in package) Brass Hubcaps, 1913 to 1916, price is $115 shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7269.JPG
IMG_7267.JPG

Set of 2 new, reproduction Exhaust Pack Nuts, price is $45 for the set, shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7266.JPG
IMG_7265.JPG

Three books in this set, published by James Kenealy back in the 1970s and 80s, in almost new condition with nearly 1000 pages of vintage advertising for Model T Ford accessories. Hard to find copies of these books in good condition, so I think you’ll be real happy with these.

These are wonderful primary source documents that will help you in your...

For sale, seven issues of Ford Dealer and Service Field from 1926 and 1927.

Two copies of April 1927, then May 1927, June 1927, August 1927 and March and April of 1926. Pretty good shape, considering they are almost 100 years old.

One of the April 1927 issues has a torn cover, and the other April 1927 has a clipped page in the back where someone...

Rebuilt Coils For Sale 1.jpg

Have your coils rebuilt by someone who has rebuilt over 27,000 coils for satisfied customers worldwide.
Coils ordered between December 1, 2025 and January 31, 2026 will enjoy the benefit of free Priority Mail return shipping to USA addresses.
If you have questions, please send me an email via this Forum including...

I am working on light mounts for my 26 speedster. I don’t have the mounting hardware. The critical part as I understand it is a washer with a convex top that matches the concave shape on the lamp itself. Can anyone post a picture of the washer, tell me how big around it is, and tell me the diameter of the bolt that goes through it?

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

One nice and complete NH carburetor for rebuild. No gas inlet crack visible. Price WAS $50.00 NOW $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251205_095220.jpg

20251205_095206.jpg

15-16 hood former in excellent condition asking 250 or best offer
15 windshield frame in ok condition asking150 or best offer located in Connecticut please call or text George 2036873827

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

A bunch of wheels for sale. All need hubs most are in ok shape. Asking $25 each plus shipping or local pickup. Please call or text only George 2036873827

120 years ago today the Ford Motor Company held an emergency board meeting. The reason? To compose a letter demanding treasurer and board director A. Y. Malcomson resign. He secretly put together a competing company, Aerocar, and the Detroit newspapers had just reported on the company and Malcomson’s role as President and majority owner of the new...

It’s similar to the Sprague but doesn’t have the correct mounting bracket, I heard that someone used to replicate the bracket…..Any out there?

Spun brass hub covers
4 pc set. $250 shipping included. Pics on request. Eric Edwards
New Double Twist horn lHD $375 post included.
Edwards 705 828 5405