MTFCA Forum

For sale- Nickel plated Bermuda bell, rings nice and loud. The nickel plating has some imperfections. The top plate and button are not original but look nice. $200 + shipping

F03D0384-2966-42DA-B686-082432646496.jpeg

1E49D5D1-ACE0-4F0A-90BB-5BE49D1CF463.jpeg

Looking for Ford Script 21 spare tire cover in Black.

Jack Leonhardt 920-226-1005 or 26modeltt@att.net

One set of Bob's Antique Auto adjustable lifters NORS. Standard size. New sets retail for $105. Get these for $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251118_152758.jpg

3 really nice valve stem caps. Unfortunately I don't have the rim nuts the original nickel is in great shape! I hope someone can match these up and complete a set! $30 plus the ride
Enjoy Your Day!

Pan support bracket set $35.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_132843.jpg

Coupe, Sedan and Truck brass side light bracket set $35.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_133538.jpg

Nice 2301 Stewart drive gear 16Tooth 8 pitch. NOS? The dealers are $32.95 + shipping, how does $28 delivered in the states

For the past 60 years, six antique car clubs in Portland, Oregon have held the Always in April Portland Swap Meet. I am pleased to announce that we will have it again April 10, 11 & 12, 2026!

However, with online classifieds, T-bay, and various internet sales, our proceeds are currently only about 20% of what they were ten years ago. The swap...

Early Holley Two Screw brass carburetor. Looks nice and complete. Shafts snug. Great for restoration. Price is $175 plus $17.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_101022.jpg

20251118_100952.jpg

20251118_100936.jpg

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other one. l don't think they have ever been used. dealers are asking $36.95 + shipping. $60 including shipping.

Enjoy Your Day!

Cowl tank access door. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_101459.jpg

20251118_101511.jpg

On the back cover of the current Model T Times, is probably the rarest 1925 Ford in existence. I most likely was sold new as a non starter model. If you look through the L R spokes, it appears there is a battery. I have only seen one example of a 1925 non starter car in 60 years in this hobby. Note the wheels are non demountable, with 30 X 3's in...

Looks like a good rebuild candidate, I haven’t taken this apart…$125.00 plus shipping. EST $23.00
Best form of contact is Text or call 423-2eight4-97fifty. Check or postal money order Only.
IMG_3425.jpeg IMG_3424.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00. Note one early bracket with small top saddle
Text or call is the best form of contact to get ahold of me. Check or Postal money order Only.
423-2eight4-97fifty
IMG_3431.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00
Text or call is the best form of contact to get ahold of me. Check or postal money order Only
423-2eight4-97fifty
IMG_3433.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00
Text or call is the best form of contact to get ahold of me. Check or postal Money order Only.
423-2eight4-97fifty
IMG_3432.jpeg

WTB original amp meter in good working condition to fit the larger pre 26/27 dash plate

How do I delete photos that I put on my profile page? Can’t seem to find any way to do that.

Here’s a spindle for a 11-19. It has the full round section instead of the oval. The threads are real nice on this one.
$25 plus shipping

Thanks!
Mike Bird

IMG_4021.jpeg IMG_4020.jpeg

I just pulled the float cover and found all new viton needle float valve - this thing is just way too nice to sell as a junker as I was offering, and honestly, I am concerned that a buyer might think that the steel parts are too far off the mark and end up annoyed with me in the end. I'd rather not put either of us in that position. This is one of...

I know these aren't for a Model T but are other early cars on this forum! I have ONE brand new 34x4 BF Silvertown Goodrich, black, straight side tire from Coker. I also have four new flaps. These are new, never mounted. Price is 400.00. I will also throw in two 34x4 Non-Skid tires that are really old and can only be used for display or rollers....

I've been offering these NOS USA-made taps for several years. These are the last. When they're gone, they're gone. I do not intend to stock or sell these any more. The pair consist of 1/4-32 plug tap for the float valve and the richness adjustment needle, and a 3/8-24 bottoming tap for the main jet.

While the picture shows multiple taps, that was...

1918 non starter engine block rhd trans
1916-19 RHD transcover. Non starter style
Early Aluminum transmission covers 1911-16
Call for pics and further details. 705 828 5405
Eric Edwards

Clean crack free castings $75
Restored front fender irons painted black $50
1909-10 Kingston Coil box with original switch coils and case brass mounts. $950
1911-12 New silicon steel 12 rivet clamshells.fully machined pressed into original tubes and backing plates. Last or available. $2750
Eric Edwards 705 828 5405

NOS brass hub covers. Full coverage of the 6inch hub
Pr of fronts ( deep) and Pr rears ( shallow) $250 for the set of 4 These are quality spinnings
Eric Edwards. 705 828 5405

Free: Several Pre-War? Racing Spark Plugs, Champion R 18 Bright. Never installed, apparently. The problem is that these were flooded out at some point and became badly rusted as a result. I don't know if any of these will clean up, but these are take apart plugs so you might be able to salvage the porcelain electrodes. I took a wire wheel to one...

Wanted. Rear spring shackles, 1920 TonTruck.

Car has had recent upgrades such as the new top and upholstery, valve job, transmission bands, tires, tuned coils, etc. Has large drum Rocky Mountain brakes, the early ones with the center anchor that work both forwards and backwards. Original, correct motor. Aluminum pistons. Crank starts on battery or magneto. Working Acetylene lights....

For Sale- complete TT truck chassis with engine. Great start for a truck project. Includes a Ruckstell rear end.
If you are local to the San Francisco area and are interested, contact me. Price is negotiable. Chassis is in a storage container in Oakland. this needs a new home. I'll try to post some pictures in the next few days....

For sale a 1914 Screenside Model T, originally a fruit and vegetable truck from Chicago. The vehicle is sitting in my garage and needs completion. I no longer have the time to assemble it. The vehicle is complete with many new parts. Please email for additional information. I'll take any reasonable offer. I'm located in the Indianapolis area.

WTB, a clutch disk drum puller 5Z-314 (3Z-614)

Explosion whistle, aluminum body should clean up nice. The valve is seized and needs to be freed up.

$40 plus shipping in the U.S.

IMG_8246.jpeg

IMG_8247.jpeg

IMG_8248.jpeg

IMG_8249.jpeg

I am looking for a correct splitdorf coil box for my 1906 Ford model N. I am currently running an early T box but would like to replace it with the correct box. I did talk to someone at Hershey at the early Ford meeting who said he probably had one at home, but I do not recall his name.

These are all single stack field coils with 3/8” windings. There is 31 in this stack. There will be a minimum total of 40 and possibly up to 50 by the time I get them all in one place. Located in Wisconsin between Milwaukee & Madison just off the interstate. Make a reasonable offer. Email only. Please do not pm. Please do not post here (including...

Nice shape. Only $40 + FedEx.
gwhouse731(at)gmail(dot)com

None are “pairs”. Burners on left and right $40 each. Burner in middle $50. Free mailing in lower 48 in bubble envelopes. gwhouse731(at)gmail(dot)com

Believed never used but black rubber hose is rotten. Air valve and PSI dial is operable. Handle is 2 piece. Only $40 plus ‘the ride’. gwhouse731(at)gmail(dot)com

Brand New 6 Volt Model T Starter Field Coils and everything needed to install them.
$59 + shipping (usually under $10) - Compare at OVER $100 for the Wilsons

These are also Epoxy dipped with plastic insulators between the fields and will likely last well over 100 years.
Note - the post is Silver Soldered and pre-installed

I have ONE 6v starter I built that a customer ended up not needing that I can ship right now - no waiting.

Best Possible quality rebuild.
PRICE DROP! $325!!

Now that I make literally every part in these units except the housing and the armatures, I can pass some savings on to everyone.

New field coils with silver soldered post (yes, I now make...

FS. 09/10 double twist brass horn with cover. New screen, repro reed and repro brass adapter tube. Tube wrap is correct oval vs round and has horizontal inlet vs angled. Excellent show condition,, has no mfr. stamped name, otherwise identical to Rubes or Nonpariel. $700.00 plus freight.
Scott. Text or call 513 three seven eight 4235 or...

For sale EMCO cast iron muffler with cutout. EMCO model F muffler and cutout was painted with hi temp header paint. Cutout valve operates smoothly, lubricated with anti-seize hi-temp paste. Inlet measures 2-inches inside diameter and outlet measures 1-5/8 inch inside diameter. Muffler has two mounting screw. Price $250. plus shipping. Call or text...

For Sale Cantrell Rear Axle Outer Sleeve Puller. Threads are in good shape and lever for sleeve engagement operates smoothly. Small lever operates pin to engage sleeve, center screw pushes against axle to extract sleeve. Tool is lightly marked Cantrell on side. Price $225. plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

For sale early left and right headlight forks marked (DB) Dodge bros. and raised part numbers. Forks are in nice condition with good threads and nuts. Price $250 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

FS Fork mount headlights

$100 plus shipping

For Sale a pair of Essex headlights.

$200 plus shipping

Newly manufactured and fully machined axle housings Silicon steel cast centres pressed into original tubes and backing plates. All internals fit these perfectly machined hidings. No rivet leaks no droop ready to accept your internals
Machined to factory specs This is the last available pair. No further runs. Call for details
705 828 5405 Eric...

Pat’d Dec 22 1914 carburetor completely disassembled and cleaned, new float, float valve, venturi, choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushing installed, test run. $235 postpaid to continental USA email: wlkma9@gmail.com

Found a mate to the left one so have a pair to sell $55 + shipping. IMG_3780.jpg IMG_3781.jpg
Craig.

Windshield stanchions $ 45 + shipping IMG_3782.jpg IMG_3783.jpg
Craig.

Windshield frame mount spot light, Good glass, fare mirror, switch & bulb work. $60 + shipping IMG_3790.jpg IMG_3791.jpg IMG_3792.jpg
Craig.

Pr 1913-17. Original Cast muffler ends clean with no cracks $75 or
1918-27 Original cast muffler ends. Clean no cracks $75 pr
Pair restored front fender irons 1916-25
$50 pr
Eric Edwards. 795 828 5405

1909-10 headlamp forks sidelight brackets and dash to frame brackets. All recast in bronze $250 for all 6 pieces
Also 1909-10 front seat top pivots mint originals $125 post included
Eric Edwards 705 828 5405

1909-10 headlamp forks sidelight brackets and dash to frame brackets. All recast in bronze $250 for all 6 pieces
Also 1909-10 front seat top pivots mint originals $125 post included
Eric Edwards 705 828 5405

Reproduction 1911 - 1914 steel Hood Former Sold. plus shipping. New cost is $230.00. Lang’s 1-800-872-7871

Still on the lookout for a 2 Cylinder Ford project if you know of anything? Unrestored or an old, tired restoration etc.

Please send me a private message if you can help, or with any leads.

Thanks 🙏

Very nice Victor Top Tank for 1909-12 cars
No cracks or splits minor imperfections. Very nice $300 USD Eric Edwards

New Repriduction quadrant $35.00
Eric Edwards 705 828 5405

Brass Toquet carburetor. Appears complete. Throttle and choke are free. Interesting design and seems like a pretty basic carburetor with a straight through design. The only things I could find wrong with it are the choke spring is broken and the threads on the fuel bowl inlet aren’t the prettiest but could use a little touch up with a thread file....

One Ford Script speedo head
One Stewart speedo Hess.
Both need service. $100 ea
Eric Edwards. 705 828 5405

I have a pair of New 13-15 hubcaps.
Also 3 matching new Made in USA caps. $20 each
Eric Edwards. 705 828 5405

:mrgreen: :mrgreen: :mrgreen: Original brass top tank no cracks or splits. A few very small marks but really nice. $300 pics available
Eric Edwards 705 828 5405

Looking for a pinion gear for my 1918 Maxwell 25 if anyone has a spare to sell.

WTB 4 1910 JB coil box bottom electrical clips that the coil plugs into on the bottom of the box. New or used. Thanks Ray

1926 Ford Mdl. T Running Boards - L&R Both Boards Good Condition- $200.00 together

Nice clean crack free trans cover
No pedals $125.
Eric Edwards. 705 828 5405

1918 Non starter block Made in Canada
Also rRHD
transmission cover with pedals
Eric Edwards. 705 828 5405

IMG_7696.png New silicon steel centres pressed into original tubes and backing plates. Perfectly machined. No rivet leaks or drooping. Workmanship guaranteed. Immediate delivery. Last pair available no further runs.
$2750 1911-12.
1908-9 no rivet with smooth new backing plates and tubes $4250
Eric Edwards 705 828 5405

Hi…..any out there?

New Silicon steel castings machined to standard specs pressed into original tubes and backing plates. No rivet leaks no drooping axles
Accepts all Ford internals
Immediate delivery only one set available
$2750 USD. Eric Edwards
705 828 5405

Here is a speedometer mount that came off a straight spindle arm. Don’t see a name on it. $20 + shipping. See pictures. Email me by forum. Dan
IMG_4788.jpeg
IMG_4789.jpeg
IMG_4790.jpeg

… for your project. Excellent 2 piece frames and glass channels are 39” long and 21” high. Plate glass removed (recommended) upon request and 2 frames shipped for only $75 + FedEx.
gwhouse731(at)gmail(dot)com

For sale: starter bendix parts $200 plus postage
over $500 plus some not available

20250701_162043.jpg 20250701_162018.jpg

For Sale model A tool kit.

$135 includes shipping

A tools.jpg

For Sale, misc nuts, bolts and hardware, more pictures, More of the previous add, $80.00 + shipping
image000002 (3)lb3.jpg
7.jpg
9.jpg
13.jpg
11.jpg

My T was invited to a armature painting group

For sale: transmission clutch yoke collar $25 plus shipping

Listing this for a friend who”s family member has passed away. 1925 sedan runs and drives has a rebuilt generator rebuilt coils rebuilt carburetor new front spring. $8000.00 The car is in Hyde Park Ny the owners name is Linda her phone number is (nine one four) -490-8843

Wanted BB BBR Rajo inlet manifold to rebuild this car as it was in 1925

Ted King Rajo.jpg

A close up of a similar manifold front Mark Chaffin's photo

2025-08-10 Rajo Inlet Maniflod to suit BB BBR.png

For Sale 2 late 13-16 frames. $100 each. Located near Moorhead MN. Due to the fact both have running board brackets, I'd say they were never trailers. Steve 701 212 5009

Had a good time at the Helping Seniors trunk or treat benefit.

For sale: set of fender irons. $75 plus shipping
20251010_180222.jpg 20251010_180158.jpg

This is the last available pair of new silicon steel cast differential housings. These are fully machined centres pressed into original tubes and backing plates. Fits all years internals perfectly Available now $2750 USD
Eric Edwards 705 828 5405

I have a complete late rearend for a Model T. It has the wire wheel brake drums, complete rear axle, torque tube and drive shaft. The universal joint is not included. Make me a fair offer and pick up at my location. Tom Five03-644-937Four. I can take more pictures if necessary. SDC13029.JPG 's
The brake shoe's are also included.

New old stock taillight bracket for a Model A or Model B pick-up truck. $25.00 plus the cost of postage. Tom Five03-644-937Four SDC12991.JPG

A pair of backing plates for the 1926/27 model T. They are in fair shape and can be used with a little work. $20.00 for the pair plus the ride. Tom
five03-644-937Four SDC13026.JPG SDC13025.JPG

October 1924 Ford Service Bulletin Page 76, shows the new rib, or oil deflector cast into the transmission cover. I recently bought an earlier version transmission cover, by mistake, relying on another persons judgement.

lOOKING TO EQUIP A RIGHT HAND DRIVE NON STARTER CAR TO A RIGHT HAND DRIVE STARTER CAR USING JUST A STRIPPED (BARE) HOGSHEAD CASTING. DOES ANYONE KNOW IF THERE ARE PEDAL INTERFACE DIFFERENCES SUCH THAT THE PEDALS WOULD NOT FIT?

Please help! I am looking for a Ford Model NRS intake manifold. If you have an extra one I would like to buy it. The one on my N is a model T intake manifold that has been modified by cutting off the goose neck and welding it back on 180 degrees out (right hand drive versus left hand drive). I would really appreciate your help if you have an extra...

Looking for wheel for 1916 Touring. I have hub.
Campbell Tellman II
Beaufort, NC

For Sale 1 3/4 frames pictured. 1910-13. $600 for both. Located near Moorhead MN. Steve 701 212 5009

Oil Pan Model T Ford 1920s 26' 27' Metal 3 and 4 Dip.
I have about 5 or 6 oil pans for sale
Asking $50 a piece or $200 for all of them. Local pick up to 75002.

2025-04-13 10.32.472.jpg
2025-04-13 10.32.442.jpg
497635360_711929594825843_4086163399676039494_n.jpg

Free generator. You pay postage. Condition unknown.

Please pm me if interested.
PayPal fine.

Love to find someone with some 1926 zinc door grommets for a roadster. Anyone have any they would be willing to part with?

Last pair. Silicon steel castings machined as per original pressed into original tubes and backing plates. Workmanship guaranteed perfect $2750 USD Eric Edwards 705 828 5405

I am in need of the passenger side, side light bracket for a 1912 model T touring. The one in the picture is for the driver side, I need the one on the passenger side you can reach me through text message. My number is 419-217-8884. Thanks.

I am in need of the passenger side, side light bracket for a 1912 model T touring. The one in the picture is the driver side, it is the passenger side that I need. Thanks.

20251019_094403.jpg

Ships flat. $40 shipped to lower 48

PayPal or check is fine.

Email via forum

Nice pair, $60.00 plus shipping. Kdmks AT att.net.