Search found 170 matches

by Mopar_man
Sat Jan 11, 2020 1:02 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

So this is is what happened when I tried to use the Pack Nut Wrench. It was too small. I called the vendor I bought it from and he said it fit the nuts they had. He gave me the measurement and when I measured my Pack Nut it was bigger. I used a pair of channel locks and got it off ok. I also bought ...
by Mopar_man
Sat Jan 11, 2020 12:58 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Well so far today I got the plate mounted to the engine stand.
IMG_3110.jpeg
by Mopar_man
Fri Jan 10, 2020 8:17 pm
Forum: General Discussion Forum (started 2019)
Topic: Lang's Old Car Parts
Replies: 17
Views: 2263

Lang's Old Car Parts

So I ordered some parts from Lang's last night and today Ashly called me to let me know that one of the parts I ordered was out of stock and would I like to use another part that would do the same thing. It was a gas shutoff. I made the change and my parts are on the way. Great customer service. Tha...
by Mopar_man
Thu Jan 09, 2020 9:40 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

I just put an order in for a bunch of blots and odds and ends for the engine. Most of the bolts were the wrong length, etc. Got a question. Who makes the 1926 Water inlet with eccentric? I've seen several for sale with different prices. Some with the hardware some without.
by Mopar_man
Sun Jan 05, 2020 10:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Thanks Scott and John. I will get the correct gaskets for the intake and exhaust. Good to know that the switch is ok.
by Mopar_man
Sun Jan 05, 2020 3:41 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Today I did a bit more work. https://www.youtube.com/watch?v=pv66GyP4WWA IMG_3101.jpeg Not sure if this is ok under the starter switch. Looks like it was getting a bit hot. Is this normal? IMG_3101.jpeg The are the plugs back to front Left to right. Any comments? Look normal? Looks a bit rich to me ...
by Mopar_man
Sun Jan 05, 2020 9:19 am
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

I think the pin may be broken as well. We will have to see once I open up the engine.
by Mopar_man
Sat Jan 04, 2020 8:44 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Ha! Thanks Dick. She has a pair of gloves. My daughter is the kind of kid who was overjoyed when she got to put her had in the grease to pack a wheel bearing on my 67 Charger. Ha!!
by Mopar_man
Sat Jan 04, 2020 7:01 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Angie working on the generator bolts. The book says to pry the gears apart when removing the generator. Is it going to be that hard to put the gears back together?
https://www.youtube.com/watch?v=MdGRVQ01fso
by Mopar_man
Sat Jan 04, 2020 6:55 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

Oh I know. I read the horror stories about what can fall in there. That's why I have the lanyard on there. After I made the video the cover went back on. Ha!
by Mopar_man
Sat Jan 04, 2020 6:54 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Re: Getting Rattles Back On The Road

So today I got some parts off the car. I also had my daughter Angie with me to help.
by Mopar_man
Sat Jan 04, 2020 6:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Getting Rattles Back On The Road
Replies: 118
Views: 6306

Getting Rattles Back On The Road

So about 3 and a half years ago my wife found a 1926 Touring for sale in the local paper. I went to look at the car and bought it. The guy showed me a video of the car running form the previous year. He said the the Clutch was stuck and that was why the rear wheel was now not moving. As I took a bet...
by Mopar_man
Sat Jan 04, 2020 8:02 am
Forum: Forum Support Questions
Topic: 2020 General Discussion Forum
Replies: 3
Views: 877

Re: 2020 General Discussion Forum

Oh ok I didn't know if it was by year. Sounds good to me.
by Mopar_man
Fri Jan 03, 2020 11:43 pm
Forum: Forum Support Questions
Topic: 2020 General Discussion Forum
Replies: 3
Views: 877

2020 General Discussion Forum

Is there go to be a 2020 General Discussion Forum starting soon? Not complaining just wondering.
by Mopar_man
Thu Jan 02, 2020 5:09 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

I can already see so much that is wrong. I'm not sure I want to see what's inside!!
by Mopar_man
Wed Jan 01, 2020 8:27 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

Thanks Scott. I'll check the shaft.
by Mopar_man
Wed Jan 01, 2020 6:48 pm
Forum: General Discussion Forum (started 2019)
Topic: Question about headlight socket removal
Replies: 7
Views: 352

Re: Question about headlight socket removal

Thanks Everyone. I got them out. I was able to disconnect the wiring as well.
by Mopar_man
Wed Jan 01, 2020 6:45 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

Well I wonder if the guy who put it together booted it to the Hog's head or just loosened it enough to get the shaft past the Mag. I know I got all of the bendex out because I compared it to the new one I had as well as a drawing of the starter. I still have to pull the engine because of the Transmi...
by Mopar_man
Wed Jan 01, 2020 5:13 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

Well I have to pull the engine anyway because the Tripple gears are hitting the flywheel. I'm going to leave it on and take the hogs head off and when I rebuild the Transmission I'll put the correct Mag ring in.
by Mopar_man
Wed Jan 01, 2020 4:59 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

I think that's the issue. I'm pulling the engine anyway so I plan on taking off the Hog's head. I bet the previous owner didn't use the correct Mag ring.
by Mopar_man
Wed Jan 01, 2020 4:57 pm
Forum: General Discussion Forum (started 2019)
Topic: Question about headlight socket removal
Replies: 7
Views: 352

Re: Question about headlight socket removal

Thanks! I have all the books but didn't see a part where it talked about the reflector removal. I'll give the hook method a try when I back the socket out with the adjusting screw.
by Mopar_man
Wed Jan 01, 2020 4:19 pm
Forum: General Discussion Forum (started 2019)
Topic: Question about headlight socket removal
Replies: 7
Views: 352

Question about headlight socket removal

So I'm taking the light bar and head lamps off of my 1926 and I unscrewed the black thimble where the wires go in. How do you get the bulb socket out? How does the headlamp reflector come out? I removed the Headlight rim, glass, spring but the reflector just seems to spin and the socket moves in and...
by Mopar_man
Wed Jan 01, 2020 4:14 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

This may help. I took a video of what I trying to do. Any help would be appreciated.
https://www.youtube.com/watch?v=Xx3db0IFPD0

How then youtube video works.
by Mopar_man
Wed Jan 01, 2020 3:54 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Re: Starter removal on a 1926

It's not. It moves passed the part of the starter shaft where there is a part of the shaft covering machined off but gets stuck on the Mag after that. It does not look like there is a notch on the Mag ring. Trying not to force it but it won't come out.
by Mopar_man
Wed Jan 01, 2020 3:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter removal on a 1926
Replies: 20
Views: 1021

Starter removal on a 1926

I'm removing the starter from my 26 and have run into an issue. The car (previous owner) must have suffered something catastrophic because the Bendix drift pin and little spring was found in the oil pan as well as the whole assembly had to be gently tapped off the shaft. As I started to pull out the...
by Mopar_man
Tue Dec 17, 2019 9:32 pm
Forum: General Discussion Forum (started 2019)
Topic: Engine Stand
Replies: 3
Views: 729

Re: Engine Stand

Thanks for all the info. Almost time to pull the engine.
by Mopar_man
Mon Dec 16, 2019 11:06 pm
Forum: General Discussion Forum (started 2019)
Topic: Engine Stand
Replies: 3
Views: 729

Engine Stand

So I bought the metal plate from Lang's that you use to hold the engine by the water inlet and two pins that look like they fit where 2 of the engine pan bolts go. Am I supposed to drill out holes in the plate so the arms on my engine stand bolt up to it? The stand is a Northern tool version that ha...
by Mopar_man
Tue Dec 03, 2019 8:08 pm
Forum: General Discussion Forum (started 2019)
Topic: 26-27 coil box kit
Replies: 18
Views: 1609

Re: 26-27 coil box kit

Thanks for the input. I'll try to save my old one but now I know I can get a new one.
by Mopar_man
Tue Nov 26, 2019 7:08 pm
Forum: General Discussion Forum (started 2019)
Topic: 26-27 coil box kit
Replies: 18
Views: 1609

Re: 26-27 coil box kit

Please post how you are coming along. I have to do the same thing soon and want to see how you are going to deal with the small bar that runs through the box. I think you have to bend it to get it out. Do you heat it up? How are you going to put it back and get it tight?
by Mopar_man
Mon Nov 11, 2019 10:40 pm
Forum: OT - Off topic
Topic: Happy Birthday United States Marine Corps
Replies: 10
Views: 887

Re: Happy Birthday United States Marine Corps

Service to this Great Nation comes in many ways. Grateful to all that served and to those who support them.
by Mopar_man
Sun Nov 10, 2019 11:53 am
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

I for one liked the post. It got me thinking and now I'm down 62.5 pounds. This post motivated me to do something. So for that I say thank you. Another one was Steve Jeff's "Letter to a fat kid" I read that thing many times on his blog. I think it pushed me over the edge and Got me started. So thank...
by Mopar_man
Sun Nov 10, 2019 9:05 am
Forum: OT - Off topic
Topic: Happy Birthday United States Marine Corps
Replies: 10
Views: 887

Happy Birthday United States Marine Corps

Happy Birthday Marines. On this day in 1775 my Marine Corps came alive. How many Marines do we have out there? When did you serve. For me 1984-2014 Enlisted and Officer. I have to say I had more fun as a Sgt then I ever did as a LtCol.
ret .jpg
17 years old.jpg
by Mopar_man
Thu Oct 31, 2019 9:29 pm
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

Well my Dr didn't help besides telling me to loose weight. I did it with Nutrisystem. It worked for me. As far a carrying weight. I got that feeling when I had to get 40 pounds of dog food from the basement. Couldn't believe I had more that that on me all the time. Not good. I'm so glad I'm lighter....
by Mopar_man
Wed Oct 30, 2019 11:38 pm
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

New report. I'm down 61 pounds. Ended up giving my doctor a shock. I've got another 6 to go. Man do I feel great.
by Mopar_man
Sun Oct 13, 2019 8:54 pm
Forum: OT - Off topic
Topic: Waltham Orient
Replies: 12
Views: 1433

Re: Waltham Orient

Great info. I agree you have to have a limit. I look at it as how much do I want or need it. In this case I could have bought the car but I set my limit and stuck to it. True time is a big factor for me. I'm only 52 but I have 4 old cars and they are never done. Someday I may end up with one just no...
by Mopar_man
Fri Oct 11, 2019 10:04 pm
Forum: OT - Off topic
Topic: Waltham Orient
Replies: 12
Views: 1433

Re: Waltham Orient

Well I went and registered to bid at RM Auctions. All 4 Orients went up for bid on Thursday. The first three went over 20,000. I didn't stay for the third but I bet it went for about the same. The last time one of these sold at this same auction it went for 7500. I guess I missed the boat. Oh well I...
by Mopar_man
Sat Oct 05, 2019 12:11 pm
Forum: Classifieds - Parts
Topic: F S New 6 volt Ford script volage regulator
Replies: 11
Views: 703

Re: F S New 6 volt Ford script volage regulator

For some reason my PM to you is sitting in my out box. It says that my messages are only 2% full. Not sure why. What I had said was "If you still have a 6 volt one I'll take it. Please let me know how you would like payment and how much for shipping."

My zip code for shipping is 22406 in VA.
by Mopar_man
Sat Oct 05, 2019 11:58 am
Forum: Classifieds - Parts
Topic: F S New 6 volt Ford script volage regulator
Replies: 11
Views: 703

Re: F S New 6 volt Ford script volage regulator

Just sent you a PM. for the 6 volt Reg. If you still have it.
by Mopar_man
Mon Sep 16, 2019 9:03 pm
Forum: General Discussion Forum (started 2019)
Topic: Vottage Regulator
Replies: 7
Views: 714

Re: Vottage Regulator

Thanks for all the info. I just got my 3rd brush wrench from Lang's. Now I just have to waite on the Voltage Regulator.
by Mopar_man
Sun Sep 15, 2019 4:33 pm
Forum: General Discussion Forum (started 2019)
Topic: Vottage Regulator
Replies: 7
Views: 714

Vottage Regulator

I just bought a real nice restored generator. Hank (the guy I bought it from) told me to make sure the voltage regulator was in good condition and to adjust the third brush. I ordered the wrench from Lang's as well as a Voltage regulator. My regulator was looking real rusty and bad. The one I ordere...
by Mopar_man
Sun Sep 15, 2019 4:23 pm
Forum: Classifieds - Parts
Topic: FS Rebuilt Starters and Generators
Replies: 20
Views: 2645

Re: FS Rebuilt Starters and Generators

I have to say the Generator I received was beautiful!!! Hank was very easy to deal with and I'm very happy with my purchase. If he sells more in the future don't wait.
by Mopar_man
Mon Sep 02, 2019 12:15 pm
Forum: Classifieds - Parts
Topic: Rebuilt NH Carburetors
Replies: 9
Views: 1089

Re: Rebuilt NH Carburetors

Tried to send you a PM not sure if it got to you. It's says it's in my outbox. I would like a 26/7 one with the vitron tip. How can I send payment. I'm in Fredericksburg VA 22406 for shipping purposes.
by Mopar_man
Mon Sep 02, 2019 11:21 am
Forum: Classifieds - Parts
Topic: FS Rebuilt Starters and Generators
Replies: 20
Views: 2645

Re: FS Rebuilt Starters and Generators

That was me on the generator and the carb. Just sent an e-mail and once the bank opens tomorrow the money order will be sent. Thanks!!
by Mopar_man
Sun Sep 01, 2019 1:32 pm
Forum: Classifieds - Parts
Topic: Rebuilt NH Carburetors
Replies: 9
Views: 1089

Re: Rebuilt NH Carburetors

What is a vitron tip? Do you have a 26/7 one left?
by Mopar_man
Sat Aug 31, 2019 12:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Why great cars don't sell?
Replies: 34
Views: 3122

Re: Why great cars don't sell?

I'm of the school of thought that you have to bring the kids up in a car show world. Start them young let them get their hands dirty on old stuff and new stuff. Let them make mistakes, Let them start the cars. Let them work the controls while you push moving the car around. If old enough let them dr...
by Mopar_man
Thu Aug 15, 2019 9:48 pm
Forum: General Discussion Forum (started 2019)
Topic: How many cups of grease does it take...
Replies: 32
Views: 2460

Re: How many cups of grease does it take...

Great info here. I always like reading what you write Mr. Jelf. I learn something every time. This was a good experiment. I bet there are many who just think that a few turns is ok on the cup.
by Mopar_man
Tue Jul 30, 2019 10:07 pm
Forum: OT - Off topic
Topic: Two Piece Lug Nuts on Modern Vehicles
Replies: 13
Views: 1028

Re: Two Piece Lug Nuts on Modern Vehicles

So this is what I think is happening. You go have an oil change and tire rotation. Or have other work that requires the removal of tires. The guy working on the car uses a 22MM socket on a 21MM lug nut. He has a 500 ft pound airgun and takes the lugs off and puts them on. The chrome shell starts to ...
by Mopar_man
Sun Jul 21, 2019 7:09 pm
Forum: General Discussion Forum (started 2019)
Topic: A nice upholstery trick
Replies: 7
Views: 1279

Re: A nice upholstery trick

So I have a 26 touring and the doors have the "Buttons" in them. Do they just push in the holes? Do I need to cut the old ons out?
by Mopar_man
Sun Jul 21, 2019 6:58 pm
Forum: OT - Off topic
Topic: Waltham Orient
Replies: 12
Views: 1433

Re: Waltham Orient

BHarper. Thanks for the info. I have loved these cars since I was a boy. I understand what you are saying about a pile of parts. Usually I see these cars as a pile of parts. I'm ok with that. Kind of like having a T that has many years all together. I have my budget and I will make sure I don't bust...
by Mopar_man
Sun Jul 21, 2019 6:44 pm
Forum: OT - Off topic
Topic: 1916 Buick barn find
Replies: 34
Views: 3096

Re: 1916 Buick barn find

I say get it running and make it safe but that's it. Make it the car that people look at and say "That thing runs?"
by Mopar_man
Sat Jul 06, 2019 9:54 pm
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

Keep going!!!! We can only get more healthy!!
by Mopar_man
Thu Jul 04, 2019 6:25 pm
Forum: OT - Off topic
Topic: Waltham Orient
Replies: 12
Views: 1433

Waltham Orient

Well let me start out by saying I grew up in Waltham. I always loved the buckboards and have always wanted one. The problem is so few come up for sale. Well Now I have a chance. The Hershey auction has 4 up for sale. The last one I saw sell at RC Auctions sold for 7500 but that was a few years ago. ...
by Mopar_man
Thu Jul 04, 2019 6:13 pm
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

Well I'm down 48 pounds so far. Had to buy new pants and adjust my seatbelts on my old cars! :mrgreen:
by Mopar_man
Sun May 05, 2019 8:33 pm
Forum: General Discussion Forum (started 2019)
Topic: 26 touring Help with the windshield
Replies: 5
Views: 625

Re: 26 touring Help with the windshield

Thanks for the pictures. I wonder what year bracket is on my car? If the guy before me drilled the dash then I won't feel bad drilling it for a clock later. Makes me also wonder why there is no third hole???
by Mopar_man
Sun May 05, 2019 7:06 pm
Forum: General Discussion Forum (started 2019)
Topic: 26 touring Help with the windshield
Replies: 5
Views: 625

26 touring Help with the windshield

So my 26 Touring has nickel windshield stanchions that are not on the car. In looking where they go one side of the body has three holes like the stanchion the other has two. I looked on the back side of the metal and could not see any evidence of a third hole that may have been filled in. The car d...
by Mopar_man
Tue Apr 30, 2019 10:47 pm
Forum: OT - Off topic
Topic: What have you done on an old non-Model T vehicle.
Replies: 145
Views: 14176

Re: What have you done on an old non-Model T vehicle.

MOPAR or no car! Unless it's a T. Ha Ha Ha Nothing wrong with Mopar - remember it was the brothers Dodge that did a lot of work for Henry in the early days of the T, before they went out on their own. Makes them kind of like a cousin of sorts! My first love was Mopar. I have 3 old ones and 4 newer ...
by Mopar_man
Sun Apr 28, 2019 7:27 am
Forum: OT - Off topic
Topic: What have you done on an old non-Model T vehicle.
Replies: 145
Views: 14176

Re: What have you done on an old non-Model T vehicle.

Sorry for the Raoul confusion. Not sure how that happened ..... The Coronet was the first car I ever really took notice of when new, and really took a liking to them. Watched them being offloaded from the trucks at B.C. Hawk Dodge in Bellevue, Washington. I was five years old. Years later, when I n...
by Mopar_man
Fri Apr 26, 2019 9:19 pm
Forum: OT - Off topic
Topic: What have you done on an old non-Model T vehicle.
Replies: 145
Views: 14176

Re: What have you done on an old non-Model T vehicle.

Yes all numbers matching. It's a 727. Dana rear. Has the Super Track Pack option but someone changed the gears out to 3.75. Love your B Body!!
by Mopar_man
Wed Apr 24, 2019 9:12 pm
Forum: OT - Off topic
Topic: What have you done on an old non-Model T vehicle.
Replies: 145
Views: 14176

Re: What have you done on an old non-Model T vehicle.

I've been working at fixing oil leaks on my 64 Imperial and my wife's 69 Super Bee. Had to do some helicoils. I also had my 14 year old Daughter change the oil in the Jeep and put a transmission cover on the 67 Charger. Spark plugs all around. Ha!
by Mopar_man
Mon Apr 22, 2019 9:37 pm
Forum: OT - Off topic
Topic: Obese, hell I didn't even think I was overweight
Replies: 81
Views: 6453

Re: Obese, hell I didn't even think I was overweight

After reading a post here about Nutrisystem I decided to try it. So far I'm down 27 pounds. When I'm done I will never go back to what I ate before. You have to understand that your body is different and can't process food like you did before. I've got another 20 to go but I'm going to keep it up.
by Mopar_man
Tue Apr 02, 2019 9:24 pm
Forum: General Discussion Forum (started 2019)
Topic: Balancing transmission drums in VA
Replies: 24
Views: 2299

Re: Balancing transmission drums in VA

Tom, Please post what you have found. I'm in Fredericksburg and need to get my transmission rebuilt. One of my triple gears is hitting the fly wheels. I have a 26 Touring. What are you working on? I would also join and ask your local AACA. A guy from my AACA club gave me the following recommendation...
by Mopar_man
Mon Feb 25, 2019 9:46 pm
Forum: General Discussion Forum (started 2019)
Topic: How Long Have You Owned Your Old Iron?
Replies: 62
Views: 5247

Re: How Long Have You Owned Your Old Iron?

IMG_1828.jpg
IMG_0708.jpg
1926 Ford since 2017
1967 Dodge Charger since 1999
1964 Imperial since 1990
1969 Dodge Superbee since 2003 (wife's car)
by Mopar_man
Wed Feb 20, 2019 8:29 pm
Forum: VowellArt
Topic: Thank You
Replies: 0
Views: 697

Thank You

Wow! What a great service to the Model T world. I'm a visual person and these drawings are gold. My 13 year old daughter has expressed an interest in Graphic Art. I've had her take a look at these drawings to sho her how Art assists people in learning. Keep them coming. Oh and lots for 26 touring pl...
by Mopar_man
Sat Feb 09, 2019 10:10 pm
Forum: General Discussion Forum (started 2019)
Topic: The Great War returns
Replies: 8
Views: 1934

Re: The Great War returns

Took the family to see this today. My 13 year old daughter loved it.
by Mopar_man
Wed Feb 06, 2019 9:39 pm
Forum: General Discussion Forum (started 2019)
Topic: Whats the Name of your T?
Replies: 69
Views: 6125

Re: Whats the Name of your T?

IMG_0323.jpg
My daughter named mine.
by Mopar_man
Mon Jan 14, 2019 6:25 pm
Forum: General Discussion Forum (started 2019)
Topic: How to get the ladies interested !!!!!
Replies: 17
Views: 2022

Re: How to get the ladies interested !!!!!

Two of the best clubs I was in were in New Bern NC. One was a hot rod club that welcomed all cars. the other was an AACA chapter. Both clubs had the same format. We would meet at a place we could sit and eat. The Hot Rod club would meet at the Golden Corral and the AACA would meet at an an old folks...
by Mopar_man
Mon Jan 14, 2019 5:46 pm
Forum: General Discussion Forum (started 2019)
Topic: How to Add an Avatar Photo
Replies: 112
Views: 9878

Re: How to Add an Avatar Photo

I think I did it.