Search found 5327 matches
- Thu Jul 14, 2022 8:56 am
- Forum: General Discussion Forum
- Topic: Stan Howe Estate Auction #2
- Replies: 28
- Views: 4859
Re: Stan Howe Estate Auction #2
I have to honestly say.., whether you are a hobbyist or business...., safety, protection, control logging in and out of the clients item sent to you are most of importance. Why would anyone require a deposit for repair of a valuable item, we all bill out monthly statements when the repair process be...
- Wed Jul 13, 2022 7:35 pm
- Forum: General Discussion Forum
- Topic: Head Bolts Stretched - Studs?
- Replies: 41
- Views: 4110
Re: Head Bolts Stretched - Studs?
Hi Newbee! Just very, very light coat of aluminum anti-seize and torque to the the specs. When replacing head bolts, grade 5 or grade 8.., do NOT forget to chase all new bolts with a die. #1 failure is a flaking of coating on modern bolts, which in turn cause an inaccurate torque. Don't forget botto...
- Wed Jul 13, 2022 6:35 pm
- Forum: General Discussion Forum
- Topic: Stan Howe Estate Auction #2
- Replies: 28
- Views: 4859
Re: Stan Howe Estate Auction #2
Yep..., Only the auction company and IRS will benefit at an auction!
Hank
Hank
- Sun Jul 10, 2022 9:56 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS Complete 3 Port Olds Head Kit
- Replies: 6
- Views: 1812
Re: FS Complete 3 Port Olds Head Kit
Head is Sold! Thanks MTFCA!
- Sun Jul 10, 2022 4:01 pm
- Forum: General Discussion Forum
- Topic: Midwest Speedster Rally 18
- Replies: 11
- Views: 1733
Re: Midwest Speedster Rally 18
AWESOME!!!!!! I am jealous..., going to mow grass.
Hank
Hank
- Sat Jul 09, 2022 8:37 pm
- Forum: Classifieds - Vehicles
- Topic: 1924 Model T Roadster
- Replies: 12
- Views: 4120
Re: 1924 Model T Roadster
Glad to hear Bob!
Hank
Hank
- Sat Jul 09, 2022 8:35 pm
- Forum: General Discussion Forum
- Topic: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
- Replies: 14
- Views: 2218
Re: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
OK..., Bad (too much) air gap between the armature and field coil will cause that on a rebuilt alternator!
Hank
Hank
- Sat Jul 09, 2022 11:30 am
- Forum: Classifieds - Vehicles
- Topic: SOLD!!!! FS 3/4 Scale Depression Street Legal Race Car Project
- Replies: 9
- Views: 5275
Re: FS 3/4 Scale Depression Street Legal Race Car Project
SOLD for sure now! Thanks MTFCA.
- Fri Jul 08, 2022 9:09 pm
- Forum: Classifieds - Vehicles
- Topic: 1924 Model T Roadster
- Replies: 12
- Views: 4120
Re: 1924 Model T Roadster
$3,000.00 to $3,500.00 is taking advantage of a friends widow! Get real.., I am getting out of T's for many reasons but primarily cheap, unsafe, people and cars.
Hank
Hank
- Fri Jul 08, 2022 9:03 pm
- Forum: General Discussion Forum
- Topic: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
- Replies: 14
- Views: 2218
Re: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
Nailed it on the head John!
- Fri Jul 08, 2022 7:26 pm
- Forum: General Discussion Forum
- Topic: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
- Replies: 14
- Views: 2218
Re: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
A bad ground or oily connection normal does that, just saying.
Hank
Hank
- Fri Jul 08, 2022 4:55 pm
- Forum: General Discussion Forum
- Topic: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
- Replies: 14
- Views: 2218
Re: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
ND, Mitsubishi, Hitachi, Toyo Electric all were contacted to the same design. The voltage plug in system to use either 6 or 12 volts was for the single wire conversion, ie, commercial applications (forklifts, etc). The other wires if not using the plug in unit is for an exciter wire and idiot light....
- Fri Jul 08, 2022 2:55 pm
- Forum: General Discussion Forum
- Topic: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
- Replies: 14
- Views: 2218
Re: Plug In Voltage Regulator For Early Texas T Mitsubishi Alternator
They were custom made.., I have one 6 volt available for $25.00 with shipping!
Hank
Hank
- Fri Jul 08, 2022 2:53 pm
- Forum: Classifieds - Vehicles
- Topic: SOLD!!!! FS 3/4 Scale Depression Street Legal Race Car Project
- Replies: 9
- Views: 5275
Re: FS 3/4 Scale Depression Street Legal Race Car Project
It is until the end of the month..., then to China to become a washer/dryer set!
- Fri Jul 08, 2022 6:20 am
- Forum: Classifieds - Vehicles
- Topic: SOLD!!!! FS 3/4 Scale Depression Street Legal Race Car Project
- Replies: 9
- Views: 5275
Re: FS 3/4 Scale Depression Street Legal Race Car Project
A new brass radiator should at least get $80.00 at current scrap prices!
- Thu Jul 07, 2022 2:36 pm
- Forum: Classifieds - Parts
- Topic: WTB Front hub
- Replies: 6
- Views: 1196
Re: WTB Front hub
Sorry, mine was a rear hub.
Hank
Hank
- Wed Jul 06, 2022 3:15 pm
- Forum: Classifieds - Parts
- Topic: WTB Front hub
- Replies: 6
- Views: 1196
Re: WTB Front hub
Might have just the one you need. Will look later.
Hank
Hank
- Mon Jul 04, 2022 8:32 pm
- Forum: General Discussion Forum
- Topic: Babbitt price $$$
- Replies: 6
- Views: 1685
Re: Babbitt price $$$
Hello! Yes, like everything Dan! Price cutter bits for machining tools and cry too.
Hank
Hank
- Mon Jul 04, 2022 6:24 pm
- Forum: General Discussion Forum
- Topic: Getting Rattles Back On The Road
- Replies: 578
- Views: 138893
Re: Getting Rattles Back On The Road
AWESOME Robert and Young Lady!!!!!!!
- Sun Jul 03, 2022 8:37 am
- Forum: Classifieds - Parts
- Topic: FS Chevy Disc Steel Rims/Adapters 20" Set & 21" Set
- Replies: 5
- Views: 1565
Re: FS Chevy Disc Steel Rims/Adapters 20" Set & 21" Set
All Gone!!!!!!!!
- Sat Jul 02, 2022 5:42 pm
- Forum: Classifieds - Vehicles
- Topic: Sorry, no longer available. F.S. 1912 Ford model T Towncar.
- Replies: 17
- Views: 8999
Re: Sorry, no longer available. F.S. 1912 Ford model T Towncar.
Have Fun Frank.., You deserve it!!!!!!!
Hank
P.S. Get off of my soap box, both of us on it, it is going to break!
Hank
P.S. Get off of my soap box, both of us on it, it is going to break!
- Wed Jun 29, 2022 6:50 am
- Forum: General Discussion Forum
- Topic: Disc Wheel identity
- Replies: 3
- Views: 982
Re: Disc Wheel identity
Chevy's!!!!!! 20" 1929's.
Hank
Hank
- Tue Jun 21, 2022 5:42 pm
- Forum: General Discussion Forum
- Topic: Darel Leipold is 90 today. The 1910 is 112.
- Replies: 32
- Views: 3375
Re: Darel Leipold is 90 today. The 1910 is 112.
HAPPY BIRTHDAY DAREL!
Hank
Hank
- Mon Jun 20, 2022 5:27 pm
- Forum: General Discussion Forum
- Topic: Cold Bluing hardware
- Replies: 12
- Views: 1929
Re: Cold Bluing hardware
Very clean metal, warmed in the sun, multiple coats gives a nice appearance which is elements resistant. I only use this brand as it holds up.
To each their own!
Hank
To each their own!
Hank
- Sun Jun 19, 2022 7:10 pm
- Forum: General Discussion Forum
- Topic: Has Anyone Used a......
- Replies: 11
- Views: 1701
Re: Has Anyone Used a......
Do not think for $85.00 it has life in it. Ice cream stops would be a better alternative.
Hank
Hank
- Sun Jun 19, 2022 6:39 am
- Forum: Services
- Topic: small workshop for Model T parts and service in Germany
- Replies: 2
- Views: 1558
Re: small workshop for Model T parts and service in Germany
Awesome Markus!!!!!!!!
- Sat Jun 18, 2022 6:24 am
- Forum: General Discussion Forum
- Topic: For All the Nayers.., Here is the Slayer
- Replies: 3
- Views: 1476
Re: For All the Nayers.., Here is the Slayer
It will cure just fine!!!!!!!!
- Fri Jun 17, 2022 5:35 pm
- Forum: Classifieds - Vehicles
- Topic: SOLD!!!! FS 3/4 Scale Depression Street Legal Race Car Project
- Replies: 9
- Views: 5275
Re: FS 3/4 Scale Depression Street Legal Race Car Project
Back to the scrap yard!
- Thu Jun 16, 2022 6:38 pm
- Forum: Classifieds - Vehicles
- Topic: SOLD!!!! FS 3/4 Scale Depression Street Legal Race Car Project
- Replies: 9
- Views: 5275
Re: FS 3/4 Scale Depression Street Legal Race Car Project
Going for scrap!!!!!!
- Thu Jun 16, 2022 6:38 pm
- Forum: Classifieds - Vehicles
- Topic: FS SUPER NICE 1925 BOAT-TAIL SPEEDSTER
- Replies: 19
- Views: 10252
Re: FS SUPER NICE 1925 BOAT-TAIL SPEEDSTER
Going in a coma in my barn, to be sold upon my death!
Hank
Hank
- Thu Jun 16, 2022 6:36 pm
- Forum: Classifieds - Vehicles
- Topic: FS 1914 Gentleman's Speedster- Very Fast!!!!
- Replies: 52
- Views: 21478
Re: FS 1914 Gentleman's Speedster- Very Fast!!!!
Going in a coma in my barn..., to be sold upon my death!
Hank
Hank
- Tue Jun 14, 2022 8:05 pm
- Forum: General Discussion Forum
- Topic: Floorboard problems.
- Replies: 3
- Views: 897
Re: Floorboard problems.
Frank, You can remove the hand brake from underneath the car to get the floor board out. Just options!
Hank
Hank
- Sun Jun 12, 2022 11:13 pm
- Forum: General Discussion Forum
- Topic: For All the Nayers.., Here is the Slayer
- Replies: 3
- Views: 1476
For All the Nayers.., Here is the Slayer
Pre 1975 Volvo's for the most part all had Gyptal coating applied at the factory on the inside of the engines and transmissions. Now you know why they have broken world records on the most miles. Applied correctly it will not insulate but cause a non-stick surface to prevent crud build up. IMG_0026....
- Sun Jun 12, 2022 10:14 am
- Forum: General Discussion Forum
- Topic: AUSTRALIA postage, not a happy camper.
- Replies: 14
- Views: 1834
Re: AUSTRALIA postage, not a happy camper.
Good for you Ken! A bunch of crap! Challenge their butts!
Hank
Hank
- Sat Jun 11, 2022 6:35 pm
- Forum: Classifieds - Parts
- Topic: FS Model A Cut Down, Balanced, Cross Drilled Crankshafts for Model T's
- Replies: 5
- Views: 2086
Re: FS Model A Cut Down, Balanced, Cross Drilled Crankshafts for Model T's
Going to China!!!!!
- Sat Jun 11, 2022 6:34 pm
- Forum: Classifieds - Parts
- Topic: FS Chevy Disc Steel Rims/Adapters 20" Set & 21" Set
- Replies: 5
- Views: 1565
Re: FS Chevy Disc Steel Rims/Adapters 20" Set & 21" Set
Going to China!!!!!
- Sat Jun 11, 2022 6:33 pm
- Forum: Classifieds - Parts
- Topic: FS Beautiful Chevy Wheel Adapters to Ford Wood Hubs
- Replies: 13
- Views: 3062
Re: FS Beautiful Chevy Wheel Adapters to Ford Wood Hubs
Going to China!!!!!!
- Sat Jun 11, 2022 6:32 pm
- Forum: Classifieds - Parts
- Topic: SUPER SUNDAY SUSPENSION COMPONENT(S) BLOW OUT SALE!
- Replies: 11
- Views: 3184
Re: SUPER SUNDAY SUSPENSION COMPONENT(S) BLOW OUT SALE!
Going to China!!!!!
- Sat Jun 11, 2022 6:25 pm
- Forum: Classifieds - Parts
- Topic: Early Mag coil cores
- Replies: 5
- Views: 1323
Re: Early Mag coil cores
Great for a pond with a small boat for an anchor! Just Sayin'
Hank
Hank
- Sat Jun 11, 2022 12:01 pm
- Forum: General Discussion Forum
- Topic: AUSTRALIA postage, not a happy camper.
- Replies: 14
- Views: 1834
Re: AUSTRALIA postage, not a happy camper.
Welcome to the new normal of a global economy!!!!!
Hank
Hank
- Wed Jun 08, 2022 6:42 pm
- Forum: Classifieds - Parts
- Topic: FS Early Swedish Made Left and Right Door Latches
- Replies: 1
- Views: 658
FS Early Swedish Made Left and Right Door Latches
Made of a very high quality, $125.00 for the pair with lower 48 shipping! Email or Text ONLY if interested.
Build tough like this 122S!
All the Best,
Hank
Build tough like this 122S!
All the Best,
Hank
- Wed Jun 08, 2022 6:29 pm
- Forum: Classifieds - Parts
- Topic: SOLD Early crankcase breather cap SOLD
- Replies: 2
- Views: 961
Re: SOLD Early crankcase breather cap SOLD
Well..., Too late for me, I hauled about 20 of them for scrap metal 6 months ago. No body wanted them.
Hank
Hank
- Tue Jun 07, 2022 7:44 pm
- Forum: General Discussion Forum
- Topic: New Tax law in effect - eBay & others - Thanks Joe
- Replies: 30
- Views: 3923
Re: New Tax law in effect - eBay & others - Thanks Joe
This is far from an "Off Topic" item as it directly effects the hobby beyond words. Those whom do not like it, do not click and read. Your other options for parts are slowly going away.., get involved and quit burying your head in the sand. When the 18 Amendment was made into law, personal income ta...
- Mon Jun 06, 2022 7:58 am
- Forum: General Discussion Forum
- Topic: New Tax law in effect - eBay & others - Thanks Joe
- Replies: 30
- Views: 3923
Re: New Tax law in effect - eBay & others - Thanks Joe
You just hit the nail on the head.., more than one time use to sell items.
Hank
Hank
- Mon Jun 06, 2022 6:15 am
- Forum: General Discussion Forum
- Topic: Breeze Carburetor
- Replies: 5
- Views: 1175
Re: Breeze Carburetor
I believe John has you covered Jay!
Hank
Hank
- Mon Jun 06, 2022 6:13 am
- Forum: General Discussion Forum
- Topic: New Tax law in effect - eBay & others - Thanks Joe
- Replies: 30
- Views: 3923
Re: New Tax law in effect - eBay & others - Thanks Joe
Oh and don't forget..., they are going after flea markets too. Yes, no joke. So now after the one on our mountain closes (6 months down the road), the closest one is 30 miles away. At gas prices, not worth it.
Hank
Hank
- Sun Jun 05, 2022 9:53 pm
- Forum: General Discussion Forum
- Topic: Breeze Carburetor
- Replies: 5
- Views: 1175
Re: Breeze Carburetor
Hey Jay,
#2 is a flooding push down on the float to give more wet fuel for starting.
#3 is a fuel mixture.
#4 is a poppet valve, some were used for a throttle but since you have one seen close to the intake mount, they used this as an anti-backfire.
Hope this Helps,
Hank
#2 is a flooding push down on the float to give more wet fuel for starting.
#3 is a fuel mixture.
#4 is a poppet valve, some were used for a throttle but since you have one seen close to the intake mount, they used this as an anti-backfire.
Hope this Helps,
Hank
- Thu Jun 02, 2022 9:11 pm
- Forum: Classifieds - Vehicles
- Topic: Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!
- Replies: 125
- Views: 33926
Re: Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!
Be patience Walt.., I looked for 3 years and found the 1966 Volvo 122s with all the options in your neck of the woods just 3 weeks ago. I waited and found.., 66,000 original miles, never re-painted, etc. Hang in there BABY!
Hank
Hank
- Wed Jun 01, 2022 8:56 pm
- Forum: General Discussion Forum
- Topic: Aluminum Radiator?
- Replies: 32
- Views: 3473
Re: Aluminum Radiator?
And at this rate...., you will be buying motorcycle tires for your 16, 17, 18, 19, 20 and 21 inch rims! Everyone wants to hold back until it is too late, now it becomes scarce all of sudden everyone wants. Sounds familiar..., head gaskets! Just Sayin'.., You must support vendors or they shut the doo...
- Mon May 30, 2022 8:33 pm
- Forum: Classifieds - Parts
- Topic: Low head free
- Replies: 16
- Views: 2666
Re: Low head free
I like Pat's idea.., Make breakfast!
- Mon May 30, 2022 8:32 pm
- Forum: General Discussion Forum
- Topic: Getting Rattles Back On The Road
- Replies: 578
- Views: 138893
Re: Getting Rattles Back On The Road
"Dad...., My finger is sore as all get out! Can we take an ice cream break!"
- Mon May 30, 2022 6:30 pm
- Forum: Classifieds - Parts
- Topic: Wanted - Engine Block Lift
- Replies: 5
- Views: 1413
Re: Wanted - Engine Block Lift
You can make one from a log carrier. Just sayin'
Hank
Hank
- Mon May 30, 2022 6:29 pm
- Forum: Classifieds - Parts
- Topic: Full Flow Float Valves and Taps - Get them while they're available
- Replies: 11
- Views: 2835
Re: Full Flow Float Valves and Taps - Get ready for tour season
Beautiful work as always Scott! Thanks for your support of a much needed item!
All the Best,
Hank
All the Best,
Hank
- Mon May 30, 2022 6:26 pm
- Forum: Classifieds - Parts
- Topic: Low head free
- Replies: 16
- Views: 2666
Re: Low head free
Come on Dan..., Heat up in an oven, sure wool with cut outs, oxy/ace tanks and about 3 pounds of brass rods with flux. $300.00 later in material, about 16 hours labor, and 10 pounds sweated off your body.., DONE! And you saved an original "RARE" head! LOL Brother!
- Sun May 29, 2022 6:11 am
- Forum: Classifieds - Parts
- Topic: "STILL LOOKING FOR" : Snow Chain " Bear MFG Co "
- Replies: 11
- Views: 2034
Re: "STILL LOOKING FOR" : Snow Chain " Bear MFG Co "
Man..., I had a set just like them!
Hank
Hank
- Sun May 29, 2022 6:08 am
- Forum: General Discussion Forum
- Topic: Cartouche Upholstery
- Replies: 34
- Views: 4240
Re: Cartouche Upholstery
David you are a comedian!!!! Never had a problem with their products either, yes cheaper than others in quality and price but does the job since most are not going for a trophy with limited use/budget. You can not buy the material and stitch it up for their price..., ask me how I know. Started my up...
- Thu May 26, 2022 9:51 pm
- Forum: General Discussion Forum
- Topic: Question about exhaust/intake manifold plate
- Replies: 15
- Views: 2157
Re: Question about exhaust/intake manifold plate
Yes.., our special "Dogbones" back in the day!
- Thu May 26, 2022 7:38 pm
- Forum: General Discussion Forum
- Topic: Question about exhaust/intake manifold plate
- Replies: 15
- Views: 2157
Re: Question about exhaust/intake manifold plate
Pinch blocks are your friend! Just Sayin'
- Mon May 23, 2022 3:38 pm
- Forum: General Discussion Forum
- Topic: Good Day Pick'n Parts at Hank Lee's Place
- Replies: 3
- Views: 1114
Re: Good Day Pick'n Parts at Hank Lee's Place
Thanks Folks! Treat people as you wish to be treated and life becomes sweet!
All the Very Best,
Lee’s of Tin-A-See
All the Very Best,
Lee’s of Tin-A-See
- Sun May 22, 2022 6:56 pm
- Forum: General Discussion Forum
- Topic: Exhaust rings for different car
- Replies: 7
- Views: 1163
Re: Exhaust rings for different car
Or make them from a short piece of exhaust tubing/pipe.
Hank
Hank
- Sun May 22, 2022 3:53 pm
- Forum: Classifieds - Parts
- Topic: Stromberg OF Carbs. Rebuilt
- Replies: 28
- Views: 3948
Re: Stromberg OF Carbs. Rebuilt
Dear John, No disrespect intended, but you played that same game on me a few times (when you were not planting a crop) and I warned you. I see it is a pattern, do not disrespect a gentleman's agreement, follow through quickly, or take the rear tit. Do not forget it and send payment timely. As stated...
- Sat May 21, 2022 8:39 pm
- Forum: General Discussion Forum
- Topic: A model T fits in with any event.
- Replies: 8
- Views: 1401
Re: A model T fits in with any event.
Moonshine he says! Mister that is now cheaper per gallon than that dim dar dinosaur goo and I bet ya there ain't no carbon footprint in dim dar heads! Wink, Wink..., The human head included! Hillbillies have been known to be correct with multiple purpose fuels for many years.., just ask Granny Clamp...
- Thu May 19, 2022 12:04 pm
- Forum: Classifieds - Parts
- Topic: Wanted: NOS perches and spindles
- Replies: 3
- Views: 811
Re: Wanted: NOS perches and spindles
I think I have one set left, will check later for ya!
Hank
Hank
- Thu May 19, 2022 6:12 am
- Forum: Classifieds - Parts
- Topic: Stromberg OF Carbs. Rebuilt
- Replies: 28
- Views: 3948
Re: Stromberg OF Carbs. Rebuilt
Go Bruce Go!!!!!!
- Tue May 17, 2022 6:54 pm
- Forum: General Discussion Forum
- Topic: Defective Lifters show up again
- Replies: 10
- Views: 1905
Re: Defective Lifters show up again
Just WONDERFUL!!!!!!!
- Tue May 17, 2022 2:41 pm
- Forum: Classifieds - Parts
- Topic: For Sale - Stromberg Acorn Nuts
- Replies: 12
- Views: 2120
Re: For Sale - Stromberg Acorn Nuts
Very nice as always Scott!!!!!!
- Mon May 16, 2022 4:40 pm
- Forum: General Discussion Forum
- Topic: Headgaskets: Everybody is Out of Them
- Replies: 59
- Views: 7007
Re: Headgaskets: Everybody is Out of Them
It is literally amazing the cry of demand.., Been here many times, but when someone retools to produce, puts on the market, new price, they all scream! They all have friends to help make them something or to get by for now instead of purchasing. It is a simple Return On Investment, (R.O.I.) as a bus...
- Mon May 16, 2022 6:17 am
- Forum: Classifieds - Parts
- Topic: New Part For Sale: Front End Accessory Frame Brace
- Replies: 6
- Views: 1445
Re: New Part For Sale: Front End Accessory Frame Brace
Nice Set Up Ed!!!!!!!!!
- Sun May 15, 2022 6:39 am
- Forum: General Discussion Forum
- Topic: What is it...?
- Replies: 36
- Views: 4291
Re: What is it...?
I get it Kevin..., Looks Great! I think I am a dinosaur.
Hank
Hank
- Sat May 14, 2022 10:13 pm
- Forum: General Discussion Forum
- Topic: What perch is this?
- Replies: 8
- Views: 1211
Re: What perch is this?
Funky like the stink on a monkey!
- Sat May 14, 2022 8:37 pm
- Forum: General Discussion Forum
- Topic: Headgaskets: Everybody is Out of Them
- Replies: 59
- Views: 7007
Re: Headgaskets: Everybody is Out of Them
Hey but at the rate of complaining about the cost when available, my last cost per square foot of 1/8" copper plate was about $38.00 delivered, that was if I bought 2 each 3' x 6' sheets. That was before the mega price gouging/pandemic crap! Price it now or brass and cry!
Hank
Hank
- Sat May 14, 2022 8:30 pm
- Forum: General Discussion Forum
- Topic: What is it...?
- Replies: 36
- Views: 4291
Re: What is it...?
In my world it is excellent work Kevin.., but with all your time in making the dies, annealing, etc a high speed spin forming from copper or brass sheet would not take a lot of time to master...., just me! An inside pattern of your float dimensions on the chuck of the lathe made from steel, a nice r...
- Sat May 14, 2022 6:23 pm
- Forum: General Discussion Forum
- Topic: What have you done on your Model T in May?
- Replies: 55
- Views: 6048
Re: What have you done on your Model T in May?
Benefit car show for a young man (37 years old) Fighting an aggressive cancer! This is my first car show..., imagine that. Really!
- Fri May 13, 2022 8:45 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet
- Replies: 36
- Views: 4885
Re: Luray Swap Meet
Watch it! Girls normally get their way but this is good thing now, LOL!
Hank
Hank
- Thu May 12, 2022 7:48 pm
- Forum: General Discussion Forum
- Topic: Model A Crank
- Replies: 5
- Views: 1247
Re: Model A Crank
Even with all the holes drilled in a Model A crank..., Never seen one close to being balanced. Ford pretended to pay his people well and they pretended to work by just drilling random balance holes!
- Thu May 12, 2022 9:30 am
- Forum: General Discussion Forum
- Topic: shocking Blockley shipping quote - RESOLVED!
- Replies: 28
- Views: 2873
Re: shocking Blockley shipping quote
Oh…, and don’t forget with taxes the magic word..,”must have insurance and benefits”!
- Thu May 12, 2022 7:32 am
- Forum: General Discussion Forum
- Topic: shocking Blockley shipping quote - RESOLVED!
- Replies: 28
- Views: 2873
Re: shocking Blockley shipping quote
Some people do not pay attention to current events and their surroundings. The end user always picks up the tab.
Hank
Hank
- Mon May 09, 2022 4:57 pm
- Forum: General Discussion Forum
- Topic: Passing of Patty Lang
- Replies: 66
- Views: 6190
Re: Passing of Patty Lang
With Greatest Sympathy and Respect.
The Lee’s of Tennessee
The Lee’s of Tennessee
- Sun May 08, 2022 7:59 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet
- Replies: 36
- Views: 4885
Re: Luray Swap Meet
It just makes no sense to me how grown men piss and moan about the price of gas or shipping as a deal breaker of the most affordable antique car there is..., then to top that off, "Why are these parts not being made anymore?"!
Hank
Hank
- Sun May 08, 2022 8:25 am
- Forum: General Discussion Forum
- Topic: Luray Swap Meet
- Replies: 36
- Views: 4885
Re: Luray Swap Meet
Simply put it is Christmas in May! Get real.., spend your children inheritance as they really don’t care and only want you to be happy!
- Sat May 07, 2022 5:32 pm
- Forum: Classifieds - Parts
- Topic: HIMICO BUILT ENGINE AND TRANSMISSION
- Replies: 21
- Views: 5747
Re: HIMICO BUILT ENGINE AND TRANSMISSION
Rare to find one all there!
- Sat May 07, 2022 7:33 am
- Forum: General Discussion Forum
- Topic: La Revue commerciale automobile - 25th July 1911
- Replies: 3
- Views: 969
Re: La Revue commerciale automobile - 25th July 1911
POW, WHAM, ETC!!!!!! Take that BATMAN!!!!
- Fri May 06, 2022 5:33 pm
- Forum: Classifieds - Parts
- Topic: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
- Replies: 5
- Views: 1240
Re: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
Tim, I think you have a hidden camera somewhere here on the property!!!!!
- Fri May 06, 2022 5:20 pm
- Forum: General Discussion Forum
- Topic: "What to Carry" revisited
- Replies: 21
- Views: 2568
Re: "What to Carry" revisited
If you restore and/or recondition properly, carrier a spare tire with appropriate hand tools, fire extinguisher, battery quick disconnect/fuse, and tire pump and drive it! It is all about the experience and not about the worries and what if's encountered! If you need all the extra dead weight in the...
- Fri May 06, 2022 8:57 am
- Forum: Classifieds - Parts
- Topic: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
- Replies: 5
- Views: 1240
Re: FS Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
In the trash!!!!!
- Thu May 05, 2022 7:03 pm
- Forum: General Discussion Forum
- Topic: External starter for early cars
- Replies: 22
- Views: 2904
Re: External starter for early cars
Nice set up Craig!!!!!!!
- Wed May 04, 2022 6:48 pm
- Forum: General Discussion Forum
- Topic: Z Head ?
- Replies: 2
- Views: 770
Re: Z Head ?
Pat they work fine.., just retorque cold a few times and no worries.
Hank
Hank
- Tue May 03, 2022 6:16 pm
- Forum: General Discussion Forum
- Topic: Dual Exhaust
- Replies: 4
- Views: 1224
- Tue May 03, 2022 3:05 pm
- Forum: General Discussion Forum
- Topic: Notice from my wife ….
- Replies: 33
- Views: 3752
Re: Notice from my wife ….
Call it a dog and say it followed you home!!! It has worked a few times for me! Don’t forget the collar and lead!
- Tue May 03, 2022 2:58 pm
- Forum: General Discussion Forum
- Topic: Fuse Location
- Replies: 18
- Views: 1742
Re: Fuse Location
Until it happens and burns to the ground.., the non believers will never change. I think the most intelligent of people believe in a proactive approach. Now let’s see how many read all those pink elephant clauses and annual “changes to your policy” fliers with your premiums for antique car insurance...
- Mon May 02, 2022 10:53 pm
- Forum: General Discussion Forum
- Topic: Fuse Location
- Replies: 18
- Views: 1742
Re: Fuse Location
Debates, disagreements, for the great minds are only a moment in time. If no fuse is used.., it is not a smoke check but a condition of very small particles of black carbon a drift in the atmosphere. Just like the term.., "Flash Light" or "Torch" in the UK. Like what were you thinking...., It is a "...
- Sun May 01, 2022 7:01 pm
- Forum: Classifieds - Parts
- Topic: Frames, Front and Rear Cross Members, EYC..., GOING TO China!
- Replies: 4
- Views: 1306
- Sun May 01, 2022 7:00 pm
- Forum: Classifieds - Parts
- Topic: Rear Leaf Springs, 5 conventional GOING TO CHINA!
- Replies: 4
- Views: 1299
- Sun May 01, 2022 6:58 pm
- Forum: Classifieds - Parts
- Topic: Buggy Springs..., Going to China!
- Replies: 7
- Views: 1923
Re: Buggy Springs..., Going to China!
GONE!!!!!!!
- Sun May 01, 2022 4:57 pm
- Forum: General Discussion Forum
- Topic: Centrifugal advance for a Bosch T distributor
- Replies: 14
- Views: 1799
Re: Centrifugal advance for a Bosch T distributor
Advancement on the distributor has a lot of variables, ie, compression ratio, cam, fuel delivery. Now a burn check on the plugs are very important in getting it right. Did a few odd advancements, (But like the other guy, not doing them anymore. Sold my SUN distributor setting machine). You could pos...
- Sun May 01, 2022 3:58 pm
- Forum: Classifieds - Parts
- Topic: WTB - Winfield SR BB Carburetor - Rajo B/BB and Fronty SR Intake Manifolds
- Replies: 4
- Views: 924
- Sun May 01, 2022 3:52 pm
- Forum: Classifieds - Parts
- Topic: WTB - Winfield SR BB Carburetor - Rajo B/BB and Fronty SR Intake Manifolds
- Replies: 4
- Views: 924
Re: WTB - Winfield SR BB Carburetor and Rajo B/BB and Fronty SR Intake Manifolds
I have the the carburetors on a Dick McKee manifold, no choke horn elbows..., $2,000.00.
Hank
Hank
- Sat Apr 30, 2022 7:53 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS Brand New Generator Gears 18 Total
- Replies: 1
- Views: 524
Re: FS Brand New Generator Gears 18 Total
All Sold, Thanks MTFCA!
- Sat Apr 30, 2022 6:33 pm
- Forum: Classifieds - Parts
- Topic: Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
- Replies: 5
- Views: 1240
Datsun Oil Pump Gaskets..., 13 Total. In the TRASH!
All for $20.00 with free shipping. Email or Text if interested.
All the Best,
Hank
All the Best,
Hank
- Sat Apr 30, 2022 6:31 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS Brand New Generator Gears 18 Total
- Replies: 1
- Views: 524
SOLD!!!!FS Brand New Generator Gears 18 Total
SOLD!!!!One price with free shipping..., $170.00, that's half price with free shipping. Email or Text Only if interested. SOLD!!!!
All the Best,
Hank
All the Best,
Hank