MTFCA Forum

Do you 2 or only one? I,m able to re-silver for sure

Hi, I would like to buy 1914 Reflector or mirror for gas headlight in usable condition if it is possible. Bellow a picture of what I'm looking for. Thank you MTFCA

Very nice one!

Hi There, here the Magneto restoration R.V. Anderson did for me. My 1914 speedster is really please with it. Well done

Hi, the 5:1 shaft and gears for sure. This ratio increase steering leverage and makes driveling less tiring and less dangerous as well.

My humble opinion.

Henry K. Lee wrote: ↑
Sat Jan 30, 2021 9:32 pm
Might be letting this one go..., but the price will be up there.

IMG_1976.jpeg

IMG_4227.jpeg

IMG_4221.jpeg

IMG_4245.jpeg

Hank

Hank you have to keep that beauty. My humble opinion here.

Starting to rebuild my rear axle as well...

Installed leather straps on the hood.

Thank You Kim you made my day

Hi Charles if you go ahead with Mark gas tank, I highly recommend to use the model kit Tank restoration at Lang's or any other suppliers. I used it with my 3 T's and 3 vintage motocycles successfully. You have to follow all the steps and please use all products no skipping any of them... I know wha...

KimDobbins wrote: ↑
Thu Jan 28, 2021 10:59 pm
I think I still have some of them NOS, I'll look tomorrow.

Kim it will be awesome and it will be really apreciated. I sent you an email but You already have my address information. I cross my fingers and toes

I've seen them two ways. Some have the Ford script, and some do not. I've been saving cores for years, hoping that someday someone will be able to re-babbit them. Hi Dear Larry, If you supply one to Bill Crosby he may be able to make them again. I do not want to commit for him but it will be nice h...

Ho I see. Did you have an old one which need to be repair ? If it is the case it easy to fix.

Thank you Allan, I will try your advices this week-end, first experience for me, I feel nervous about it.

Did you check at Lang's and Snyder's as well ?

Email sent

Still looking for original Ford Babbitt drive shaft bushing . Any help would be appreciated.

Thank you Mark and Steve. I will ask both gentlemen.

Hi Gentlemen, I need only one original Ford Babbitt front bushings in the goal to finish my 1914 driving shaft restoration as well. My rear end restoration going well. Here bellow a picture of what I'm looking for. I don't want the brass reproduction. Thank you for the attention about my request.

Hi Stan, I made some progress in rebuiding my rear axle. Here bellow some pictures where I am by now. Perhaps if you can share pictures of your second housing you cutted about a third of his way... That will gave me an idea how it works. Thank you. rear axle 1914 1.JPG rear axle 1914 2.JPG rear axl...

Sold to Mr. Wayne. Already shipped as well. Thank you MTFCA

Tim You are so right. Can't be more agree with you. We are really lucky having good T's supplier as well

Why not Lang's. They have amazing services for several years as well.

Sold to Ignacio. Thank you and Thank you MTFCA

I have One early front fender iron 1911-1912-1913 in decent condition which I don't need for my 1911 Touring car. Please look at the pictures. I'm asking the same price I paid for it in November $120 plus shipping. Thank You MTFCA. Front fender 1911-13 1.JPG Front fender 1911-13 2.JPG Front fender ...

Thank You Wayne

Back to sales Only $100 plus shipping Thank you MTFCA.

Rear end is 1913 I thought

SOLD, pending payment .... Thanks MTFCA,

Hi Dear Ervin, I let you a voice mail and also email. Feel free to contact me any time as well.

Mario

Now at 125$ plus shipping as well. Thank you MTFCA

Agree Tim, That will be one of the best hope in my life!

Also he's email: richandbertie@gmail.com

Linkage Made by Richard

His name is Richard Baughman
3771 Auburn Folsom Rd.
Loomis CA 95650
916-652-7827
He makes a very good product and will work with you if you need help.

Sure Larry did. I have 2 sets from them. Work perfectly. Super Mario Bross and Chuck Norris approve!

: AC Brake Larry.JPG (54.24 KiB) Viewed 5261 times

Hi Gentlemen, I found this article and I thought it is very interesting... It is about : The Ford Motor Company is often lauded for the invention of the modern assembly line (a claim that begins with a lot of caveats). But the truth was, unless you lived near Detroit, that Model T you ordered in 19...

Personnaly I used by now netparcel service. Most of the time cheaper for me than USPS. Easy to work with it. When I bought an item from USA friend or MTFCA member I could send to them a prepaid waybill, They just need to print out the label as well and do not worry about shipping. Here the link: ht...

T mecanic sound music for my ears. It is like a Ferrari without sound, it doesn't make sense for me. I'm in line for the Tesla CyberTruck but I will keep my 2 t's has is for sure. The CyberTruck will tow my trailer and my T's as well. We call that paradox. My humble opinion

Hi Phil, I'm leaving not so far away from you. I do not see any concern about your driveway as well. Just be carefull with your garage doors which need to have a 6'6" to 6'11' high. If you need any help or advices purchasing a T feel free to contact me. I will be glad to help you finding the right ...

Hi Phil, I'm leaving not so far away from you. I do not see any concern about your driveway as well. Just be carefull with your garage doors which need to have a 6'6" to 6'11' high. If you need any help or advices purchasing a T feel free to contact me. I will be glad to help you finding the right ...

I'm not sure which year is it? Probably 1915. If someone could confirm. Thx

A nice single brass Horn with a bulb. Refer pictures as well. Asking 150$or BO plus shipping. Please send email

John,

you may know it but it missing one spring in your brake shoe... Just in case. That occure to me sometimes forgetting things like my keys, wallet, phone or a cutter pin as well.

Stan, I thought I will removed the copper tubing and replaced by the one I bought at Lang's and following your advice. I have some doubts by now...

interested email sent

The topic slip in politic side... Gentlemen keep our focus in the topic Model T good value for the money... I will say yes for my side. Because it is not so expensive compare of other vintage cars and I'm able to make most of the repair and restoration by my own something I'm not sure I will do wit...

I have a 1913 that I've owned for over 60 years. I started restoring it as a teenager, and put a copper gas line on it. It is still on the car today with over 57,000 miles. I've never had a problem with it. I Agree! I also have many thousands of miles on my T’s with copper fuel lines and have had z...

Greg the electric car from China that cost $900 US shipped it is a scam. A guy in USA said he finally paid more than $30,000 for it and hereceived it 8 mounts later. We have to be very carefull with parts and cars coming from China... I will prefer driving my T as well.

Alex, I restored from scratch a 1911 Touring and cost me much more than buying an old correct 1911 as well... If I have to restart the process, I will buy a restored 1911 and put money on the side instead and buying the right car when I have the all fund$ to offer me the car I want. Just saying. Th...

I bought mines at Lang's as well couple years ago. How many you need? I may have some left over...

Hi John,

After trying all advices, If you are not able to fix it for any reason ask Joe Bell or Hank. Both were able to fix that for sure. Sometime external help is appreciated.

Splendide Hank! That's a nice boat! I'm first in line if a day you decided to sell. LMAO.

Just saying

Thank Rod sharing this article. Very interested indeed.

I will be happy starting with a car like this one. Very good for the price asked. It will sell quickly.

Installed my new fresh painted seats with new leather as well

I weld and recut the notch on the timer brush to allow the timer to rotate further counter clockwise. You then have plenty of travel before reaching the belt. I find this problem more common on the Anderson timers. Andy For that reason I don't like Anderson timer. I used new day timer as well

You may have engaged transmission as well... just saying. You may just need to adjust the 3 fingers.

Stutzman did mines on my 1911 Touring. They are stunning! Their services is 5 stars!

Johnny you did a fantastic job ! Congrats. How did you make the brass modling corner? I'm asking because I'm ready to install mine...

Hi Don, here bellow my original stock 1914 speedster project as well. It may inspire you.

Hi Original Larry, Let’s me kidding you. Your car is beautiful but you do not have the original very dark blue color with either blue or black fenders according Bruce McCalley book as well. Hope you don’t have any nightmare about that fact… LMAO. Seriously your car look awesome. Have a good 2021 ye...

Received mine today in Canada!

Interesting Burger to see some pictures of your OF Carb installation as well... If it is possible.

Regards,

Thank you all posting comments. A lot things I do not know about gas on a T. Very instructive for me as well.

Finished the engine and transmission installation on my stock 1914 speedster as well. Ready to do the rear axle and the driving shaft restoration by now. Great thx to Hank for parts, support and advices.

God bless him. Wish him a nice recovering.

Agree, Lang's have awesome service! Steve always helpful as well. I bought from them since several years. They made our T hobby fun !

This is my favorite timer's as well.

Hi Dear Bill,

I follow step by step this https://modeltfordfix.com/restoring-a-m ... #more-1549

I'm a newbie guy and it was a success as well. Seriously, easy to follow and a lot tips.

Good luck,

Follow Dan advices but use of Brass Hammer is prefered here to avoid any damage...

Interested. Emails sent

After looking with zoom, they are not AC Brakes as well. Sorry.

Mark, It is looking AC Brakes as well I thought. But not sure with pictures.

Hi, I know Sam the seller. A very nice guy. I bought some parts from him for my 1911 Touring in the past. He probalby could arrange something for you about the shipping as well... Just asking him you will see if he could help you. Good luck.

Pete, It is Stunning! Very impressive! Congrats.

Don't tell your wife...

I really don't know why I am saying that... LMAO

Charlie B in N.J. wrote: ↑
Thu Dec 03, 2020 9:27 pm
They can usually be driven in with a brass punch & a hammer. The trick is to use brass against the hardened race and continually moving the punch. Works fine if you take your time and keep moving.

I did the same than Charlie all the time. Always work. Be patient as well it will come off.

Hi Mark,

I don't know the guy but he's leaving an hour and half from my home. I could pick-up at his home for you and shipping to you at low cost if you want.

Just saying.

Mario

Amazing work André. Well done!

They are splendid! congrat!

Better chance in classified as well, I thought.

I would take one. Realy cool!

That's really cool Less!!!

Hi, any one have somme experience to share with the BUSHING FACING TOOL? Is it working well with a brass Drive shaft housing front bushing? I would like doing by myself without going in machine shop.

Already in a box, ready to ship!

Hi Rick,

PM sent Thank you really appreciated.

May I borrow the MTFCA video about rear axle as well from someone? It may have 3 video DVD-5-1, DVD-5-2,DVD-5-3. Thank you in advance.

Regards

Really nice work!

Hi, I have to rebuild my rear axle on my 1914 stock speedster. I would like to have A COMPREHENSIVE GUIDE to Repair and Restore my Rear Axles. I would like to have a guide with image or video step by step how to make the process for a newbie guy like me about rear axle but I have a lot enthusiasm to...

I do not heard nice comments about Tru Fire. No good customer service at all. Also the device it not good and fail after only few weeks. 3 friends of mine had very bad experience with it. Better stay with good stock coils. That's my opinion as well.

Dear Toronto MD use Netparcel.com as well. I used a lot.

Work nicely and gave you several options. Very easy to use it. Most of the time cheaper than regular post. Hope that help.

Thank you all. I have the tool from Scott. Working really well. My NH come from Russ Potter as well. A friend of mine recommended to me the modern one because it avoid to be stuck as the regular needle. But I thought I will keep as is finally with the needle Russ use.

Hi, I would like to install a Modern style replacement for needle and seat on my Holley NH. I never make it before. Anyone could share me the procedure as well?

: chuck norris.GIF (51.18 KiB) Viewed 4412 times

Thank you guys, I will crank, crank and crank but my shoulder is painfull right now. Hope I will recover soon...

How to do a compression test on engine without starter ?

What the numebr 999 mean?
I thought I heard something about that number before but I do not remember what ???

Here, other pictures as well... We could see it is made by DB

Search found 1192 matches